This study was supported by grants from the Natural Science Foundation of China (3157270). We thank Dr. Feng Shao (National Institute of Biological Sciences, China) for providing iBMDM.

1. Isolation of small extracellular vesicles
NOTE: Perform all centrifugation in steps 1.1-1.11 at 4 &#176;C.
<ol>
	<li>Preparation of sEVs-free fetal bovine serum (FBS): Centrifuge FBS overnight at 110,000 &#215; g at 4 &#176;C through an ultracentrifuge (see Table of Materials) to remove endogenous sEVs. Collect the supernatant, filter sterilize it with a 0.2 &#181;m ultrafiltration membrane, and store it at -20 &#176;C.</li>
	<li>Plate about 3 x 107 immortalized bone marrow-derived macrophages (iBMDMs) on a 150 mm culture dish and add 20 mL of DMEM culture medium (see Table of Materials).</li>
	<li>Before collecting sEVs, discard the medium. Wash the cells once with PBS (phosphate-buffered saline; Table of Materials) and replace it with a medium containing 10% sEVs-free FBS.</li>
	<li>According to the needs of the experiment, collect the cell supernatant and transfer it to 50 mL centrifuge tubes.</li>
	<li>Centrifuge the cell supernatant at 300 &#215; g for 10 min to remove the cells, discard the pellet, and transfer the supernatant to new 50 mL centrifuge tubes.</li>
	<li>Centrifuge the supernatant at 2000 &#215; g for 10 min to remove dead cells, discard the pellet, and transfer the supernatant to new high-speed centrifuge tubes (see Table of Materials).</li>
	<li>Centrifuge the supernatant at 10,000 &#215; g for 30 min through a high-speed centrifuge to remove cell debris and microvesicles, discard the pellet, and transfer the supernatant to new ultracentrifuge tubes (see Table of Materials). The volume of the open ultracentrifuge tubes is 38.6 mL; place 35 mL of cell supernatant in each tube.</li>
	<li>Centrifuge the supernatant at 110,000 &#215; g for 70 min in a swinging-bucket rotor centrifuge(see Table of Materials) to obtain crude sEV pellet.</li>
	<li>Discard the supernatant, and wash the sEVs-enriched pellet with 1 mL of PBS. Centrifuge at 110,000 &#215; g for 70 min on a Tabletop ultracentrifuge (see Table of Materials). Discard the supernatant and add 1 mL of PBS to an ultracentrifuge tube.</li>
	<li>Then pipette the precipitate continuously, transfer the 1 mL of PBS to another ultracentrifuge tube, and so on, until all ultracentrifuge tubes are mixed by pipetting.</li>
	<li>Discard the supernatant, and resuspend the pellet in 100 &#181;L of PBS, which is sEVs.</li>
	<li>Measure the total protein of sEVs using the Bicinchoninic Acid (BCA) method, following the steps below (see Table of Materials).
	<ol>
		<li>Preparation of protein standard: Add 1.2 mL of protein preparation solution into a standard protein tube (30 mg of BSA) to fully dissolve it to prepare protein standard solution (25 mg/mL). Then dilute it with PBS to a final concentration of 0.5 mg/mL.</li>
		<li>Add 0 &#181;L, 1 &#181;L, 2 &#181;L, 4 &#181;L, 8 &#181;L, 12 &#181;L, 16 &#181;L, and 20 &#181;L of the protein standard into the 96-well plate, and add PBS to make up 20 &#181;L. At the same time, add 18 &#181;L of HEPES lysis buffer (20 mM HEPES, 50 mM NaCl, 1 mM NaF, 0.5% Triton X-100) and 2 &#181;L of sEVs samples to the sample wells to be tested.</li>
		<li>Prepare the required BCA working solution as per the manufacturer&#39;s instructions, add 200 &#181;L of BCA working solution to each well, and place at room temperature (RT) for 20-30 min.</li>
		<li>Measure the absorbance at 562 nm wavelength with a microplate reader, and calculate the total protein concentration of sEVs according to the standard curve and the dilution factor. 
		NOTE: The sEVs extracted from 40 mL of supernatant by this protocol can be used for subsequent identification of protein markers (western blot). However, sEVs extracted from 200 mL of cell supernatant can be used for both morphological observation (transmission electron microscopy, TEM) and particle size analysis (nanoparticle tracking analysis, NTA). Specifically, for sEVs harvested in step 1.11, resuspend with 100 &#181;L of PBS. Take 20-30 &#181;L for morphology observation (TEM) and resuspend the remaining sample in 1 mL PBS for particle size analysis (NTA). All centrifuges are pre-cooled in advance. For step 1.8, these ultracentrifuge tubes must be strictly balanced and at least three-quarters full. If not, add medium to makeup. For step 1.11, the sEVs can be stored at 4 &#176;C for a short term (12 h); otherwise, they must be stored at -20 or -80 &#176;C to avoid protein degradation that interferes with the extraction of peptides. However, for samples used to observe the morphology and measure particle size, it is only recommended to store at 4 &#176;C for a short term (12 h).</li>
	</ol>
	</li>
</ol>
2. Observation of morphology of sEVs by transmission electron microscopy
<ol>
	<li>Place a drop of fresh sEVs sample (about 20-30 &#181;L) on the parafilm, place the number side of the copper mesh on the sEVs droplet, and let it absorb for 3 min.</li>
	<li>Absorb the excess liquid with filter paper, and then place the copper grid on a drop of distilled water and wash it twice.</li>
	<li>Absorb the excess liquid with filter paper. Then place the copper grid on the 0.5% uranyl acetate droplet for negative staining for 5 s.</li>
	<li>Repeat step 2.2.</li>
	<li>Place the prepared copper mesh on the sample rod and insert it into the sample stage.
	<ol>
		<li>Adjust the magnification to 20,000x-25,000x to find the sample to be tested. Then adjust the magnification to 100,000x and adjust the appropriate position and grayscale to observe under a transmission electron microscope (TEM; Table of Materials). The accelerating voltage for acquiring images is set at 80 kV. 
		NOTE: For step 2.1, if the concentration of sEVs samples is low (&#60;50 &#181;g/&#181;L), the adsorption time can be extended to 5 min or even longer. Alternatively, for step 1.10, a smaller volume of PBS (50 &#181;L) can be used for resuspension. For step 2.3, the negative staining time should not be too long; otherwise, it is difficult to observe the three-dimensional (3D) structure of sEVs.</li>
	</ol>
	</li>
</ol>
3. Measurements of particle size distribution and concentration of sEVs by nanoparticle tracking analysis
<ol>
	<li>For the sEVs harvested in step 1.11, dilute the solution to 1 mL for nanoparticle tracking analysis (NTA). First, clean the instrument with distilled water until there are no impurities in the field of vision. Then use a 1 mL sterile syringe to push the sample slowly (injection volume: 0.5-1 mL).</li>
	<li>Analyze the samples through supporting software (see Table of Materials). Specifically, click Start Camera and adjust the Camera level to an appropriate size (generally an intensity of 14-16 units), then select the measurement method, Standard Measurement (3 or 5 times), and click Run to collect the particles.</li>
	<li>After collecting the particles, the computer can observe the moving sEVs particles. At the same time, set the detection threshold (generally 5) to analyze the particle size distribution so that the final counted particles are all moving sEVs rather than the background. After analyzing the particles, save and export the analysis results.</li>
	<li>After use, wash the instrument with distilled water until there are no obvious particles in the field of vision, and turn off the laser. 
	NOTE: Unlike sEVs samples for TEM, sEVs samples for NTA should not be too concentrated and require larger sample volumes (at least 1 mL). Additionally, alternative methods can be used to analyze the size distribution of sEVs, such as flow cytometry and tunable resistive pulse sensing (TRPS), etc. The recommended number of particles/frames for NTA measurements (NanoSight LM10) is 40.</li>
</ol>
4. Detection of protein markers of sEVs by western blot
NOTE: According to the Minimal information for studies of extracellular vesicles (MISEV) 2018 guidelines17,18, 5 categories of proteins are recommended for the characterization of sEVs. Evaluate at least one protein marker of each category 1 to 4 for sEVs preparation.
<ol>
	<li>For the sEVs harvested in step 1.9, carefully pipette the supernatant, and add 15 &#181;L of HEPES lysis buffer for 5 min. Then add an equal amount of loading buffer and cook in boiling water for 15 min.</li>
	<li>In this protocol, the loading of sEVs&#39; protein was 8-10 &#181;g. Electrophorese the proteins in 10% gels at a constant voltage of 80 V (about 30 min).
	<ol>
		<li>When the sample enters the separating gel, adjust the voltage to 120 V (about 45 min). After the sample is 2-3 cm away from the bottom of the glass plate, disconnect the power supply and cut off the sample strip for electroporation. The composition of electrophoresis solution is described in sub-step 4.2.1.1.
		<ol>
			<li>To prepare 5x electrophoresis solution, weigh 15.1 g, 5 g, and 94 g of Tris, SDS, and glycine, respectively, and dilute to 1 L with deionized water. When it is used, it needs to be diluted 5 times with water.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Assemble the electroporation device and put in sufficient electroporation solution (about 1 L), and electroporate the protein on the nitrocellulose (NC) membrane with a constant current of 90 mA on ice for 3.5 h. 
	NOTE: To prepare 10x electroporation solution, weigh 30.25 g and 144.1 g of Tris and glycine, respectively, and dilute to 1 L with deionized water. When it is used, it needs to be prepared at a ratio of 7:2:1 of deionized water: methanol: electroporation solution.</li>
	<li>After electroporation, place the NC membrane in blocking solution (2.5 g of skimmed milk powder in 50 mL of Tris-buffered saline with 0.1% Tween 20 (TBST) for 1-2 h at RT or overnight at 4 &#176;C. The composition of TBST is described in sub-step 4.4.1.
	<ol>
		<li>To prepare 10x TBST, weigh 60.56 g and 175.32 g of Tris and NaCl, respectively, and then add 10 mL of Tween-20 and 34 mL of concentrated hydrochloric acid. Adjust pH = 7.6 with concentrated hydrochloric acid and makeup to 2 L with deionized water. When it is used, it needs to be diluted ten times with water.</li>
	</ol>
	</li>
	<li>Identify the protein markers by three sEVs&#39; markers (cluster of differentiation 9 [CD9]; &#946;-actin; tumor susceptibility gene [TSG101]) and one non- sEVs&#39; marker (glucose-regulated protein 94 [GRP94]).
	<ol>
		<li>Pipette 2 &#181;L of the above antibodies and dilute at 1:500, then incubate the NC membranes at RT for 3 h or overnight at 4 &#176;C. The diluent is the blocking solution in step 4.4.</li>
		<li>After incubation with the primary antibody, wash 3 times with 1x TBST on a shaker for 10 min each time.</li>
	</ol>
	</li>
	<li>Place the NC membrane in the diluted secondary antibody (1:500) and shake slowly on a shaker at RT for 45-50 min. Wash it 3 times with 1x TBST on a shaker for 10 min each time.</li>
	<li>Mix the chemiluminescent substrates A and B (see&#160;Table of Materials) at 1:1, add the mixed reagent to the NC membrane, and incubate at RT for 5 min.</li>
	<li>Image the NC membrane using a blot imager (see Table of Materials)
	<ol>
		<li>Open the Image Lab software, and select New Experimental Protocol.</li>
		<li>Select the application Blotting-colorimetric, cancel Highlight, click Run Experimental Protocol, acquire the marker, and save it.</li>
		<li>Then re-select the application program Blotting-chemi, and set the Total number of images and Exposure time to 30 s and 300 s, respectively.</li>
		<li>Click Run Experimental Protocol, acquire the images, and save it. Finally, remove the NC membrane and turn off the computer. 
		NOTE: For step 4.6, the incubation time of the secondary antibody should not exceed 50 min; otherwise, the background will be too dark.</li>
	</ol>
	</li>
</ol>
5. Extraction of sEVs&#39; peptides
<ol>
	<li>Wash the sEVs twice by ultracentrifugation at 110,000 &#215; g at 4 &#176;C for 70 min, and add 500 &#181;L of PBS (see Table of Materials) to resuspend them, and add 5 &#181;L of 100x protease inhibitor (see Table of Materials).</li>
	<li>Place the sample for ultrasonic crushing (see Table of Materials). Settings for ultrasonic homogenization are as follows: power: 40 W, total time: 10 min, ultrasonic time: 3 s, and interval time: 5 s.</li>
	<li>Centrifuge the crushed mixture at 13,700 &#215; g for 15 min at 4 &#176;C.</li>
	<li>After centrifugation, add dithiothreitol (DTT; Table of Materials) to the supernatant to a final concentration of 50 mmol/L, and incubate in a water bath at 56 &#176;C for 30 min.</li>
	<li>Subsequently, add 50 &#181;L of iodoacetamide (IAA; Table of Materials) to the supernatant at a concentration of 1 mol/L and leave it to react at RT for 20 min in the dark.</li>
	<li>Centrifuge the mixture at 13,700 &#215; g at 4 &#176;C for 15 min, and collect the supernatant, the crude peptides extract. Store it at -20 &#176;C for later use.</li>
	<li>Ultrafilter the obtained peptides crude extract with a 10 kDa ultrafiltration tubes19&#160;(see Table of Materials) to remove proteins, and centrifuge at 13,700 &#215; g at 4 &#176;C for 1 h. Collect the effluent and dry it in a vacuum centrifugal concentrator (see Table of Materials) at 45 &#176;C.</li>
	<li>Desalt the dried samples following steps 5.8.1-5.8.8. Use mass spectrometry-grade pure water as a solvent for the reagents.
	<ol>
		<li>Add 100 &#181;L of 0.1% trifluoroacetic acid (TFA) to each sample to completely dissolve the dried peptides.</li>
		<li>Add 100 &#181;L of 100% acetonitrile (ACN) to each desalting column, centrifuge at 400 &#215; g for 3 min at RT, and discard the effluent. Then add 100 &#181;L of 50% ACN, centrifuge at 400 &#215; g for 3 min, and discard the effluent.</li>
		<li>Add 100 &#181;L of 0.1% TFA to each desalting column, centrifuge at 400 &#215; g for 3 min, and discard the effluent.</li>
		<li>Repeat step 5.8.3.</li>
		<li>Pipette the peptides dissolved in step 5.8.1 into the desalting column, centrifuge at 400 &#215; g for 3 min, and recover the effluent. Repeat the sample loading step to let the peptide sample adsorb into the desalting column.</li>
		<li>Repeat step 5.8.3 twice.</li>
		<li>Add 50 &#181;L of 50% ACN (containing 0.1% TFA) to the desalting column, centrifuge at 400 &#215; g for 3 min, and collect the effluent (peptides) in a new mass spectrometry-grade centrifuge tube.</li>
	</ol>
	</li>
</ol>
6. Drying the desalted peptides
<ol>
	<li>Dry the desalted peptides in a vacuum centrifugal concentrator (Settings: V-AQ mode, temperature: 45 &#176;C, and time: 50 min ) and use them for subsequent mass spectrometry analysis. 
	NOTE: The extraction process of sEVs&#39; peptides should be performed on ice as much as possible to avoid protein degradation. All reagents used were prepared with mass spectrometry-grade water to avoid plastic contamination. For step 5.8, desalting results in the inevitable loss of the peptide samples. This loss can be reduced by repeating steps 5.8.5 and 5.8.7.</li>
</ol>
7. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis
NOTE: Analyze the peptides&#39; sample by liquid chromatography-tandem mass spectrometry (LC-MS/MS), specifically the Orbitrap Q Exactive HF-X mass spectrometer connected with an EASY-nLC 1000 nano-high-performance LC system (see Table of Materials).
<ol>
	<li>Separate the samples on a C18 analytical column (1.9 &#181;m of grain diameter, 15 cm length x 150 &#181;m inner diameter) at a flow rate of 60 nL/min with a 65 min gradient: 4%-15% for 4 min, 15%-28 % for 28 min, 28%-40% for 10 min, 40%-69% for 10 min, 95% constant for 7 min, 95% decreased to 6% for 1 min, and constant for 5 min (solvent A, water containing 0.1% formic acid [FA]; solvent B, 80% acetonitrile containing 0.1% FA, v/v).</li>
	<li>Ionize the eluted peptides in a nano-electrospray ionization (nano-ESI) sprayer at 320 &#176;C capillary temperature and spray voltage of 2.2 kV.</li>
	<li>Collect the mass spectral data using data-dependent acquisition mode with a resolving power of 120,000 for full-scan mode and 15,000 at MS/MS mode.
	<ol>
		<li>Perform full scans in the orbitrap from scan range 250 m/z to 1800 m/z and isolation window with 1.6 m/z.</li>
		<li>Select the top 20 intense ions for higher-energy collisional dissociation (HCD) fragmentation with a normalized collision energy of 29% and measure in the ion separator. 
		NOTE: Typical mass spectrometric conditions were as follows: Automatic gain control (AGC) targets were 3 x 106 ions for full scans and 2 x 105 for MS/MS scans; the maximum injection time was 80 ms for full scans and 19 ms for MS/MS scans; and dynamic exclusion was used for 13 s.</li>
	</ol>
	</li>
</ol>

Isolating Small Extracellular Vesicles and Extracting Their Peptidome

<ol>
	<li>Kalluri, R., LeBleu, V. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+biology,+function,+and+biomedical+applications+of+exosomes.">The biology, function, and biomedical applications of exosomes.</a> Science. 367 (6478), (2020).</li><li>Thery, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomes:+secreted+vesicles+and+intercellular+communications.">Exosomes: secreted vesicles and intercellular communications.</a> F1000 Biology Reports. 3, 15 (2011).</li><li>Mathieu, M., Martin-Jaular, L., Lavieu, G., Thery, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Specificities+of+secretion+and+uptake+of+exosomes+and+other+extracellular+vesicles+for+cell-to-cell+communication.">Specificities of secretion and uptake of exosomes and other extracellular vesicles for cell-to-cell communication.</a> Nature Cell Biology. 21 (1), 9-17 (2019).</li><li>Chen, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomal+PD-L1+contributes+to+immunosuppression+and+is+associated+with+anti-PD-1+response.">Exosomal PD-L1 contributes to immunosuppression and is associated with anti-PD-1 response.</a> Nature. 560 (7718), 382-386 (2018).</li><li>Ti, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=LPS-preconditioned+mesenchymal+stromal+cells+modify+macrophage+polarization+for+resolution+of+chronic+inflammation+via+exosome-shuttled+let-7b.">LPS-preconditioned mesenchymal stromal cells modify macrophage polarization for resolution of chronic inflammation via exosome-shuttled let-7b.</a> Journal of Translational Medicine. 13, 308 (2015).</li><li>Sun, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomal+S100A4+derived+from+highly+metastatic+hepatocellular+carcinoma+cells+promotes+metastasis+by+activating+STAT3.">Exosomal S100A4 derived from highly metastatic hepatocellular carcinoma cells promotes metastasis by activating STAT3.</a> Signal Transduction and Targeted Therapy. 6 (1), 187 (2021).</li><li>Xun, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cancer-derived+exosomal+miR-138-5p+modulates+polarization+of+tumor-associated+macrophages+through+inhibition+of+KDM6B.">Cancer-derived exosomal miR-138-5p modulates polarization of tumor-associated macrophages through inhibition of KDM6B.</a> Theranostics. 11 (14), 6847-6859 (2021).</li><li>Tai, Y. L., Chen, K. C., Hsieh, J. T., Shen, T. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomes+in+cancer+development+and+clinical+applications.">Exosomes in cancer development and clinical applications.</a> Cancer Science. 109 (8), 2364-2374 (2018).</li><li>Mashouri, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomes:+composition,+biogenesis,+and+mechanisms+in+cancer+metastasis+and+drug+resistance.">Exosomes: composition, biogenesis, and mechanisms in cancer metastasis and drug resistance.</a> Molecular Cancer. 18 (1), 75 (2019).</li><li>Yang, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Progress,+opportunity,+and+perspective+on+exosome+isolation+-+efforts+for+efficient+exosome-based+theranostics.">Progress, opportunity, and perspective on exosome isolation - efforts for efficient exosome-based theranostics.</a> Theranostics. 10 (8), 3684-3707 (2020).</li><li>Zhang, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosome:+A+review+of+its+classification,+isolation+techniques,+storage,+diagnostic+and+targeted+therapy+applications.">Exosome: A review of its classification, isolation techniques, storage, diagnostic and targeted therapy applications.</a> International Journal of Nanomedicine. 15, 6917-6934 (2020).</li><li>Xu, R., Greening, D. W., Zhu, H. J., Takahashi, N., Simpson, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extracellular+vesicle+isolation+and+characterization:+toward+clinical+application.">Extracellular vesicle isolation and characterization: toward clinical application.</a> The Journal of Clinical Investigation. 126 (4), 1152-1162 (2016).</li><li>Li, P., Kaslan, M., Lee, S. H., Yao, J., Gao, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Progress+in+exosome+isolation+techniques.">Progress in exosome isolation techniques.</a> Theranostics. 7 (3), 789-804 (2017).</li><li>Palanski, B. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+efficient+urine+peptidomics+workflow+identifies+chemically+defined+dietary+gluten+peptides+from+patients+with+celiac+disease.">An efficient urine peptidomics workflow identifies chemically defined dietary gluten peptides from patients with celiac disease.</a> Nature Communications. 13, 888 (2022).</li><li>Kalaora, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+bacteria-derived+HLA-bound+peptides+in+melanoma.">Identification of bacteria-derived HLA-bound peptides in melanoma.</a> Nature. 592 (7852), 138-143 (2021).</li><li>Hamley, I. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Small+bioactive+peptides+for+biomaterials+design+and+therapeutics.">Small bioactive peptides for biomaterials design and therapeutics.</a> Chemical Reviews. 117 (24), 14015-14041 (2017).</li><li>Lotvall, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Minimal+experimental+requirements+for+definition+of+extracellular+vesicles+and+their+functions:+a+position+statement+from+the+International+Society+for+Extracellular+Vesicles.">Minimal experimental requirements for definition of extracellular vesicles and their functions: a position statement from the International Society for Extracellular Vesicles.</a> Journal of Extracellular Vesicles. 3, 26913 (2014).</li><li>Thery, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Minimal+information+for+studies+of+extracellular+vesicles+2018+(MISEV2018):+a+position+statement+of+the+International+Society+for+Extracellular+Vesicles+and+update+of+the+MISEV2014+guidelines.">Minimal information for studies of extracellular vesicles 2018 (MISEV2018): a position statement of the International Society for Extracellular Vesicles and update of the MISEV2014 guidelines.</a> Journal of Extracellular Vesicles. 7 (1), 1535750 (2018).</li><li>Kim, Y. G., Lone, A. M., Saghatelian, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+the+proteolysis+of+bioactive+peptides+using+a+peptidomics+approach.">Analysis of the proteolysis of bioactive peptides using a peptidomics approach.</a> Nature Protocols. 8 (9), 1730-1742 (2013).</li><li>Lyapina, I., Ivanov, V., Fesenko, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Peptidome:+Chaos+or+inevitability.">Peptidome: Chaos or inevitability.</a> International Journal of Molecular Sciences. 22 (23), 13128 (2021).</li><li>Keller, M. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Decoy+exosomes+provide+protection+against+bacterial+toxins.">Decoy exosomes provide protection against bacterial toxins.</a> Nature. 579 (7798), 260-264 (2020).</li><li>Koeppen, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Let-7b-5p+in+vesicles+secreted+by+human+airway+cells+reduces+biofilm+formation+and+increases+antibiotic+sensitivity+of+P.+aeruginosa.">Let-7b-5p in vesicles secreted by human airway cells reduces biofilm formation and increases antibiotic sensitivity of P. aeruginosa.</a> Proceedings of the National Academy of Sciences of the United States of America. 118 (28), e2105370118 (2021).</li></ol>

The authors declare that they have no competing financial interests.

When investigating the function of sEVs, it is imperative to attain high-purity sEVs from complex biological samples to avoid any potential contaminations. A variety of methods for sEVs isolation have been developed13, and among these methods, differential ultracentrifugation-based methods have shown relatively high purity of sEVs. In this study, 200 mL of cell supernatant was collected for 6 h, and about 200-300 &#181;g of sEVs were obtained by differential ultracentrifugation. However, it should...

Small extracellular vesicles (sEVs) with a diameter of less than 200 nm are present in almost all types of body fluids and secreted by all kinds of cells, including urine, sweat, tears, cerebrospinal fluid, and amniotic fluid1. Initially, sEVs were considered as receptacles for disposing of cellular waste, which led to minimal research in the subsequent decade2. Recently, increasing evidence indicates that sEVs contain specific proteins, lipids, nucleic acids, and other metabolites. These molecules are transported to target cells3, contributing to intercellular communication, through which they participate in various biological processes, such as tissue repair, angiogenesis, immunity4 and inflammation5,6, tumor development and metastasis7,8,9, etc.
To facilitate the study of sEVs, it is imperative to isolate sEVs from complex samples. Different sEVs isolation methods have been developed based on the physical and chemical properties of sEVs, such as their density, particle size, and surface marker proteins. These techniques include ultracentrifugation-based methods, particle size-based methods, immunoaffinity capture-based methods, sEVs precipitation-based methods, and microfluidics-based methods10,11,12. Among these techniques, the ultracentrifugation-based method is widely recognized as the gold standard for sEVs isolation and is the most commonly used technique13.
An increasing amount of evidence suggests the presence of a multitude of undiscovered biologically active peptides in the peptidomes of various organisms. These peptides significantly contribute to numerous physiological processes by regulating growth, development, stress response14,15, and signal transduction16. The objective of sEVs&#39; peptidome is to uncover the peptides carried by these sEVs and provide clues to their biological functions. Here, we present a protocol of isolating sEVs through differential ultracentrifugation, followed by extraction of peptides from these sEVs for further analysis of their peptidome.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>BCA Protein Assay Kit</td>
			<td>Beyotime Technology</td>
			<td>P0012</td>
			<td></td>
		</tr>
		<tr>
			<td>CD9</td>
			<td>Beyotime Technology</td>
			<td>AF1192</td>
			<td></td>
		</tr>
		<tr>
			<td>Centrifugal filter tube</td>
			<td>Millipore</td>
			<td>UFC5010BK</td>
			<td></td>
		</tr>
		<tr>
			<td>Centrifuge bottles polypropylene</td>
			<td>Beckman Coulter</td>
			<td>357003</td>
			<td>High-speed centrifuge</td>
		</tr>
		<tr>
			<td>Chemiluminescent substrate</td>
			<td>Thermo Fisher Scientific</td>
			<td>34580</td>
			<td></td>
		</tr>
		<tr>
			<td>Dithiothreitol</td>
			<td>Solarbio</td>
			<td>D8220</td>
			<td>100 g</td>
		</tr>
		<tr>
			<td>DMEM culture medium</td>
			<td>Cell World</td>
			<td>N?A</td>
			<td></td>
		</tr>
		<tr>
			<td>GRP94</td>
			<td>Cell Signaling Technology</td>
			<td>20292</td>
			<td></td>
		</tr>
		<tr>
			<td>High-speed centrifuge</td>
			<td>Beckman Coulter</td>
			<td>Avanti JXN-26</td>
			<td>Centrifuge rotor (JA-25.50)</td>
		</tr>
		<tr>
			<td>Immortalized bone marrow-derived macrophages (iBMDM)</td>
			<td>National Institute of Biological Sciences, China</td>
			<td></td>
			<td>Provided by Dr. Feng Shao (National Institute of Biological Sciences, China)</td>
		</tr>
		<tr>
			<td>Iodoacetamide</td>
			<td>Sigma</td>
			<td>l1149</td>
			<td>5 g</td>
		</tr>
		<tr>
			<td>Microfuge tube polypropylene</td>
			<td>Beckman Coulter</td>
			<td>357448</td>
			<td>1.5 mL, Tabletop ultracentrifuge&#160;</td>
		</tr>
		<tr>
			<td>nano-high-performance LC system</td>
			<td>Thermo Fisher Scientific</td>
			<td>EASY-nLC 1000</td>
			<td></td>
		</tr>
		<tr>
			<td>Nanoparticle tracking analysis&#160;</td>
			<td>Malvern Panalytical</td>
			<td>NanoSight LM10</td>
			<td>NanoSight NTA3.4</td>
		</tr>
		<tr>
			<td>Orbitrap Q Exactive HF-X mass spectrometer</td>
			<td>Thermo Fisher Scientific</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr>
			<td>Phosphate-buffered saline</td>
			<td>Solarbio</td>
			<td>P1020</td>
			<td></td>
		</tr>
		<tr>
			<td>Polyallomer centrifuge tubes</td>
			<td>Beckman Coulter</td>
			<td>326823</td>
			<td>Ultracentrifuge</td>
		</tr>
		<tr>
			<td>Protease inhibitor</td>
			<td>Bimake</td>
			<td>B14002</td>
			<td></td>
		</tr>
		<tr>
			<td>SpeedVac vacuum concentrator</td>
			<td>Eppendorf</td>
			<td>Concentrator plus</td>
			<td></td>
		</tr>
		<tr>
			<td>Tabletop ultracentrifuge</td>
			<td>Beckman Coulter</td>
			<td>Optima MAX-XP</td>
			<td>Ultracentrifuge rotor (TLA 55)</td>
		</tr>
		<tr>
			<td>Transmission electron microscope</td>
			<td>HITACHI</td>
			<td>H-7650B</td>
			<td></td>
		</tr>
		<tr>
			<td>TSG101</td>
			<td>Sigma</td>
			<td>AF8258</td>
			<td></td>
		</tr>
		<tr>
			<td>Ultracentrifuge</td>
			<td>Beckman Coulter</td>
			<td>Optima XPN-100</td>
			<td>Ultracentrifuge rotor (SW32 Ti)</td>
		</tr>
		<tr>
			<td>Ultrasonic cell disruptor</td>
			<td>Scientz</td>
			<td>SCIENTZ-IID</td>
			<td></td>
		</tr>
		<tr>
			<td>Western Blot imager</td>
			<td>Bio-Rad</td>
			<td>ChemiDocXRs</td>
			<td>Image lab 4.0 (beta 7)</td>
		</tr>
		<tr>
			<td>&#946;-actin</td>
			<td>Sigma</td>
			<td>A3853</td>
			<td></td>
		</tr>
	</tbody>
</table>

identification of peptides of small extracellular vesicles from bone marrow-derived macrophages

Small extracellular vesicles (sEVs) are typically secreted by the exocytosis of multivesicular bodies (MVBs). These nanovesicles with a diameter of &lt;200 nm are present in various body fluids. These sEVs regulate various biological processes such as gene transcription and translation, cell proliferation and survival, immunity and inflammation through their cargos, such as proteins, DNA, RNA, and metabolites. Currently, various techniques have been developed for sEVs isolation. Among them, the ultracentrifugation-based method is considered the gold standard and is widely used for sEVs isolation. The peptides are naturally biomacromolecules with less than 50 amino acids in length. These peptides participate in a variety of biological processes with biological activity, such as hormones, neurotransmitters, and cell growth factors. The peptidome is intended to systematically analyze endogenous peptides in specific biological samples by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Here, we introduced a protocol to isolate sEVs by differential ultracentrifugation and extracted peptidome for identification by LC-MS/MS. This method identified hundreds of sEVs-derived peptides from bone marrow-derived macrophages.

Author Spotlight: Peptidome Extraction from Small Extracellular Vesicles Isolated from Bone Marrow-Derived Macrophages 

Identification of Peptides of Small Extracellular Vesicles from Bone Marrow-Derived Macrophages

We explore the functional roles of extracellular vesicles in innate immunity. We have developed a protocol to isolate small extracellular vesicles, or sEVs, via differential ultracentrifugation and identify the peptidome by LC-MS/MS, revealing the key biological functions of the peptides in sEVs. The extracellular vesicles have been shown to mediate intercellular communication by transporting cargo to recipient cells, such as proteins, lipids, and nucleic acids.By releasing antimicrobial components, they act the first line of defense against invading microbes in innate immunity. While differential ultracentrifugation yields highly pure small extracellular sEVs, it can be time-consuming and often results in low yields. In our study, these are major challenges for the stable identification of low-abundance peptides in the sEVs.

For the sEVs isolated by differential ultracentrifugation (Figure 1), we evaluated their morphology, particle size distribution, and protein markers according to the International Society for Extracellular Vesicles (ISEV)17.
First, the morphology of sEVs was observed by TEM, showing a typical cup-like structure (Figure 2A). NTA showed that isolated sEVs were mostly concentrated at 136 nm (F...

Watch this Scientific Journal Video about Peptidome Extraction from Small Extracellular Vesicles Isolated from Bone Marrow-Derived Macrophages at JoVE.com

This protocol describes a procedure to isolate small extracellular vesicles from macrophages by differential ultracentrifugation and extract the peptidome for identification by mass spectrometry.

Small extracellular vesicles (sEVs) are typically secreted by the exocytosis of multivesicular bodies (MVBs). These nanovesicles with a diameter of ...

identification-peptides-small-extracellular-vesicles-from-bone-marrow

Research

JoVE Journal

Biochemistry

Isolating Small Extracellular Vesicles (sEVs) by Differential Ultracentrifugation

Isolating Small Extracellular Vesicles (SEVs) by Differential Ultracentrifugation  

To begin, centrifuge FBS overnight in an ultracentrifuge at 110, 000 G and four degrees Celsius to remove the endogenous sEVs. Sterilize the supernatant by filtering it through a 0.2 micron ultrafiltration membrane to yield sEVs-free FBS. Next in a 150 millimeter culture dish, plate about 3 times 10 to the seventh immortalized bone-marrow-derived macrophages in 20 milliliters of DMEM culture medium.Incubate the dish at 37 degrees Celsius under 5%carbon dioxide overnight prior to collecting the sEVs from the macrophages. The next day, after discarding the medium, wash the cells with phosphate-buffered saline or PBS. Replace the medium with DMEM containing 10%sEVs-free free fetal bovine serum before incubating the cells at 37 degrees Celsius and 5%carbon dioxide.Based on the experiment's requirements, collect and transfer the cells'supernatant to 50 milliliter centrifuge tubes. Centrifuge the tubes at 300 G for 10 minutes to remove the cells. Transfer the result in supernatant from each tube to a new 50 milliliter centrifuge tube and discard the pellet.This time, centrifuge the supernatant at 2000 G for 10 minutes to remove dead cells. Then transfer the supernatant to new high-speed centrifuge tubes and discard the pellets. Next to remove debris and microvesicles, centrifuge the obtained supernatant at 10, 000 G for 30 minutes using a high-speed centrifuge.Transfer the resulting supernatant to new ultracentrifuge tubes by adding 35 milliliters in each tube and discarding the pellets. Centrifuge the ultracentrifuge tubes in a swinging bucket rotor centrifuge at 110, 000 G for 70 minutes before discarding the supernatant. Wash the resulting crude sEVs-enriched pellet with one milliliter of PBS.Again, add one milliliter of PBS to the washed pellet in one of the tubes, and mix by pipetting continuously. Transfer the one milliliter of resultant PBS suspension to another tube containing the pellet, and repeat the same until all pellets in the tubes are mixed by pipetting. Transfer the resultant one milliliter of sEVs-rich PBS to a new ultracentrifuge tube.Then centrifuge the new tube in a tabletop ultracentrifuge at 110, 000 G for 70 minutes. After discarding the supernatant, wash the resulting crude sEVs-enriched pellet with 100 microliters of PBS. Add 1.2 milliliters of protein preparation solution in a standard protein tube to dissolve the 30 milligrams of BSA present in it.Dilute the resulting protein standard solution with PBS to reduce its concentration from 25 to 0.5 milligrams per milliliter. Add eight different volumes of the diluted protein standard solution into wells of a 96-well plate, and bring the volume to 20 microliters in each well using PBB. Add 18 microliters of HEPES lysis buffer to the sample wells, followed by the addition of two microliters of the sEVs samples.Next, add 200 microliters of BCA working solution prepared per the manufacturer's instructions into each well. Allow the plate to rest at room temperature for 20 to 30 minutes. Finally, measure the absorbance at 562 nanometers using a microplate reader.Calculate the total protein content in the sEVs using the obtained results. The transmission electron microscopy images of the isolated sEVs displayed a typical cup-like morphology. Nanoparticle tracking analysis showed that the isolated sEVs were mostly concentrated at 136 nanometers.Western blot showed that isolated sEVs were significantly enriched of sEVs markers, including CD9, beta-actin, and TSG101. The endoplasmic reticulate marker GRP94 was only detected in the whole-cell lysate. The results indicated that the method employed yielded sEVs with a high level of purity.

Extraction of Peptides from Isolated Small Extracellular Vesicles (sEVs)

To begin, wash the isolated small extracellular vesicles or SEVs twice by ultracentrifugation at 110, 000 G and four degrees Celsius for 70 minutes. Re-suspend the vesicles in 500 microliters of phosphate buffered saline or PBS. Then, add five microliters of 100X protease inhibitor to it.Subject the sample to ultrasonic crushing at 40 watts for 10 minutes, with three second ultrasonic time, and five second interval time. Centrifuge the crushed mixture at 13, 700 G for 15 minutes at four degrees Celsius. To the obtained supernatant, add dithiothreitol to a final concentration of 50 millimolar.And incubate it in a water bath at 56 degrees Celsius for 30 minutes. Then add 50 microliters of one molar iodoacetamide to the supernatant. And allow it to react at room temperature for 20 minutes in the dark.Centrifuge the mixture at 13, 700 G and four degrees Celsius for 15 minutes. And transfer the supernatant containing the crude peptide extract to a 10 kilodalton ultracentrifuge tube. Remove protein from the crude peptide by centrifuging the ultra filtration tube at 13, 700 G and four degrees Celsius for one hour.Dry the collected effluent in a vacuum centrifugal concentrator at 45 degrees Celsius. For desalting, use mass spectrometry grade pure water as a solvent for all reagents. First, dissolve the dry peptides in 100 microliters of 0.1%trifluoracetic acid or TFA, and keep it aside.Then add 100 microliters of pure acetonitrile to each desalting column. Centrifuge the columns at 400 G for three minutes at room temperature, and discard the effluent. Then add 100 microliters of 50%acetonitrile per desalting column, and repeat the centrifugation as mentioned previously before discarding the effluent.Next, add 100 microliters of 0.1%TFA to each desalting column before centrifuging as mentioned previously. Once again, discard the effluent. Now, pipet the desalt peptides into the desalting column.Centrifuge the columns as mentioned previously to load the sample. Add the recovered effluent back to the desalting column to repeat the loading. Then, add 100 microliters of 0.1%TFA.Centrifuge as mentioned previously, and discard the effluent. Finally, add 50 microliters of 50%acetonitrile containing 0.1%TFA to the peptide in the desalting column. After centrifusion, as mentioned previously, collect the effluent in a new mass spectrometry grade centrifuge tube.

1.1K Views.  Anhui Medical University.  This protocol describes a procedure to isolate small extracellular vesicles from macrophages by differential ultracentrifugation and extract the peptidome for identification by mass spectrometry.

Isolating Small Extracellular Vesicles and Extracting Their Peptidome

Summary