Name: 18f-labeling of radiotracers functionalized with a silicon fluoride acceptor (sifa) for positron emission tomography
Uploaded: 2020-01-11T16:00:00
Description: Watch this Scientific Journal Video about 18F-Labeling of Radiotracers Functionalized with a Silicon Fluoride Acceptor SiFA for Positron Emission Tomography at JoVE.com

The authors have no acknowledgements.

CAUTION: One must keep in mind that 18F is a radioactive isotope, and therefore it is necessary to carry out all procedures behind adequate shielding. Lead shielding is appropriate for this type of radiation. Be sure to wear radiation detection badges throughout the entirety of this procedure. Additionally, immediately dispose of gloves before touching anything after the synthesis, as they may be contaminated with radioactive activity. Utilize hand-foot monitors as well as pancake Geiger counters to check for ...

<ol>
	<li>Wahl, R. L., Buchanan, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Principles and practice of positron emission tomography. , (2002).</li><li>W&#228;ngler, C., Schirrmacher, R., Bartenstein, P., W&#228;ngler, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Click-chemistry+reactions+in+radiopharmaceutical+chemistry:+Fast+&amp;+easy+introduction+of+radiolabels+into+biomolecules+for+in+vivo+imaging.">Click-chemistry reactions in radiopharmaceutical chemistry: Fast &amp; easy introduction of radiolabels into biomolecules for in vivo imaging.</a> Current Medical Chemistry. 17, 1092-1116 (2010).</li><li>Schirrmacher, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=18F-labeling+of+peptides+by+means+of+an+organosilicon-based+fluoride+acceptor.">18F-labeling of peptides by means of an organosilicon-based fluoride acceptor.</a> Angewandte Chemie International Edition. 45, 6047-6050 (2006).</li><li>Kostikov, A. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oxalic+acid+supported+Si-18F-radiofluorination:+One-step+radiosynthesis+of+N-succinimidyl+3-(di-tert-butyl[18F]fluorosilyl)benzoate+([18F]SiFB)+for+protein+labeling.">Oxalic acid supported Si-18F-radiofluorination: One-step radiosynthesis of N-succinimidyl 3-(di-tert-butyl[18F]fluorosilyl)benzoate ([18F]SiFB) for protein labeling.</a> Bioconjugate Chemistry. 23 (1), 106-114 (2012).</li><li>Cacace, F., Speranza, M., Wolf, A. P., Macgregor, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nucleophilic+aromatic+substitution;+kinetics+of+fluorine-18+substitution+reactions+in+polyfluorobenzenes.+Isotopic+exchange+between+18F-+and+polyfluorobenzenes+in+dimethylsulfoxide.+A+kinetic+study.">Nucleophilic aromatic substitution; kinetics of fluorine-18 substitution reactions in polyfluorobenzenes. Isotopic exchange between 18F- and polyfluorobenzenes in dimethylsulfoxide. A kinetic study.</a> Journal of Fluorine Chemistry. 21, 145-158 (1982).</li><li>Schirrmacher, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+p-(di-tert-butyl[18F]fluorosilyl)benzaldehyde+([18F]SiFA-A)+with+high+specific+activity+by+isotopic+exchange:+A+convenient+labeling+synthon+for+the+18F-labeling+of+N-amino-oxy+derivatized+peptides.">Synthesis of p-(di-tert-butyl[18F]fluorosilyl)benzaldehyde ([18F]SiFA-A) with high specific activity by isotopic exchange: A convenient labeling synthon for the 18F-labeling of N-amino-oxy derivatized peptides.</a> Bioconjugate Chemistry. 18, 2085-2089 (2007).</li><li>Kostikov, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=N-(4-(di-tert-butyl[18F]fluorosilyl)benzyl)-2-hydroxy-N,N-dimethylethylammonium+bromide+([18F]SiFAN+Br-):+A+novel+lead+compound+for+the+development+of+hydrophilic+SiFA-based+prosthetic+groups+for+18F-labeling.">N-(4-(di-tert-butyl[18F]fluorosilyl)benzyl)-2-hydroxy-N,N-dimethylethylammonium bromide ([18F]SiFAN+Br-): A novel lead compound for the development of hydrophilic SiFA-based prosthetic groups for 18F-labeling.</a> Journal of Fluorine Chemistry. 132, 27-34 (2011).</li><li>W&#228;ngler, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kit-like+18F-labeling+of+proteins:+Synthesis+of+4-(di-tert-butyl[18F]fluorosilyl)benzenethiol+(Si[18F]FA-SH)+labeled+rat+serum+albumin+for+blood+pool+imaging+with+PET.">Kit-like 18F-labeling of proteins: Synthesis of 4-(di-tert-butyl[18F]fluorosilyl)benzenethiol (Si[18F]FA-SH) labeled rat serum albumin for blood pool imaging with PET.</a> Bioconjugate Chemistry. 20, 317-321 (2009).</li><li>Iovkova, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=para-Functionalized+aryl-di-tert-butylfluorosilanes+as+potential+labeling+synthons+for+18F+radiopharmaceuticals.">para-Functionalized aryl-di-tert-butylfluorosilanes as potential labeling synthons for 18F radiopharmaceuticals.</a> Chemistry. 15, 2140-2147 (2009).</li><li>W&#228;ngler, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=One-step+18F-labeling+of+carbohydrate-conjugated+octreotate-derivatives+containing+a+silicon-fluoride-acceptor+(SiFA):+In+vitro+and+in+vivo+evaluation+as+tumor+imaging+agents+for+positron+emission+tomography+(PET).">One-step 18F-labeling of carbohydrate-conjugated octreotate-derivatives containing a silicon-fluoride-acceptor (SiFA): In vitro and in vivo evaluation as tumor imaging agents for positron emission tomography (PET).</a> Bioconjugate Chemistry. 21, 2289-2296 (2010).</li><li>Ilhan, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=First-in-human+18F-SiFAlin-TATE+PET/CT+for+NET+imaging+and+theranostics.">First-in-human 18F-SiFAlin-TATE PET/CT for NET imaging and theranostics.</a> European Journal of Nuclear Medicine and Molecular Imaging. 46, 2400-2401 (2019).</li></ol>

SiFA labeling chemistry represents one of the first 18F-labeling methods employing an extraordinarily efficient isotopic exchange reaction that can be performed at room temperature. A typical radiochemical reaction relies on the formation of a carbon-fluorine bond via reaction of [18F]fluoride with a fluoride-reactive functionality through an elimination or substitution pathway. These reaction conditions are often harsh, performed at extreme pH or high temperature, and are laden with byproducts or r...

Fluorine-18 (109-minute half-life, 97% positron emission) is among the most important radionuclides for positron emission tomography (PET), a noninvasive imaging method that visualizes and quantifies the bio-distribution of radiolabeled tracers for various diseases1. Peptides and proteins are especially difficult to label with [18F]fluoride because they require building blocks formed by multi-step syntheses2. To reduce the complexity of 18F-radiolabeling, silicon-fluoride acceptor (SiFA) was recently introduced as reliable tools3. The SiFA group consists of a central silicon atom connected to two tertiary butyl groups, a derivatized phenyl moiety, and a non-radioactive fluorine atom. The tertiary butyl groups impart hydrolytic stability to the silicon-fluoride bond, which is a critical feature for in vivo applications of SiFA conjugates as imaging agents.
When attached to a small molecule or biomolecule, the SiFA building blocks bind radioactive [18F]fluoride anions by exchanging fluorine-19 for fluorine-18 at nanomolar concentrations without forming significant amounts of radioactive side products4. Moreover, a high radiochemical yield is quickly achieved by labeling the SiFA moiety in dipolar aprotic solvents at low temperatures. This is in stark contrast to classical isotopic exchange reactions, which produce radiotracers of low specific activity5. In these cases, large amounts of precursor (in the range of milligrams) must be used to obtain reasonable incorporation of [18F]fluoride. Isotopic exchange reactions using SiFAs are far more efficient, as confirmed by kinetic studies and density functional theory calculations6,7. Labeled SiFAs are easily purified by solid-phase extraction since both the labeled and unlabeled SiFA compounds are chemically identical. This differs from traditional radiolabeled tracers, where the precursor molecule and the labeled product are two different chemical species and must be separated after radiolabeling by high-performance liquid chromatography (HPLC). Using SiFA building blocks, small-molecules, proteins, and peptides can be successfully labeled with [18F]fluoride by one- and two-step labeling protocols devoid of complicated purification procedures (Figure 1)4,8,9. Moreover, some SiFA-labeled compounds are reliable in vivo imaging agents for blood flow and tumors10. The simplicity of SiFA chemistry enables even untrained investigators to use [18F]fluoride for radiotracer synthesis and development.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>[18F]F-/H2[18O]O</td>
			<td>(Cyclotron produced)</td>
			<td>-</td>
			<td>-</td>
		</tr>
		<tr>
			<td>[2.2.2]Cryptand</td>
			<td>Aldrich</td>
			<td>291110</td>
			<td>Kryptofix 2.2.2</td>
		</tr>
		<tr>
			<td>Acetonitrile anhydrous</td>
			<td>Aldrich</td>
			<td>271004</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Deionized water</td>
			<td>Baxter</td>
			<td>JF7623</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Ethanol, anhydrous</td>
			<td>Commercial Alcohols</td>
			<td></td>
			<td>-</td>
		</tr>
		<tr>
			<td>Potassium carbonate</td>
			<td>Aldrich</td>
			<td>209619</td>
			<td>-</td>
		</tr>
		<tr>
			<td>QMA cartridge</td>
			<td>Waters</td>
			<td>186004540</td>
			<td>QMA SepPak Light (46 mg) cartridge</td>
		</tr>
		<tr>
			<td>Equipment</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>C-18 cartridge</td>
			<td>Waters</td>
			<td>WAT023501</td>
			<td>C-18 SepPak Light cartridge</td>
		</tr>
		<tr>
			<td>C18 column</td>
			<td>Phenomenex</td>
			<td>00G-4041-N0</td>
			<td>HPLC Luna C18 250 x 10 mm, 5 &#181;m</td>
		</tr>
		<tr>
			<td>HPLC</td>
			<td>Agilent Technologies</td>
			<td>-</td>
			<td>HPLC 1200 series</td>
		</tr>
		<tr>
			<td>micro-PET Scanner</td>
			<td>Siemens</td>
			<td>-</td>
			<td>micro-PET R4 Scanner</td>
		</tr>
		<tr>
			<td>Radio-TLC plate reader</td>
			<td>Raytest</td>
			<td>-</td>
			<td>Radio-TLC Mini Gita</td>
		</tr>
		<tr>
			<td>Sterile filter 0.22&#181;m</td>
			<td>Millipore</td>
			<td>SLGP033RS</td>
			<td>-</td>
		</tr>
	</tbody>
</table>

18f-labeling of radiotracers functionalized with a silicon fluoride acceptor (sifa) for positron emission tomography

The para-substituted di-tert-butylfluorosilylbenzene structural motif known as the silicon-fluoride acceptor (SiFA) is a useful tag in the radiochemist&#39;s toolkit for incorporating radioactive [18F]fluoride into tracers for use in positron emission tomography. In comparison to conventional radiolabeling strategies, isotopic exchange of fluorine-19 from SiFA with [18F]fluoride is carried out at room temperature and requires minimal reaction participants. The formation of by-products is thus negligible, and purification is greatly simplified. However, while the precursor molecule used for labeling and the final radiolabeled product are isotopically discrete, they are chemically identical and are thus inseparable during purification procedures. The SiFA tag is also susceptible to degradation under the basic conditions arising from the processing and drying of [18F]fluoride. The &#39;4 drop method&#39;, wherein only the first 4 drops of eluted [18F]fluoride are used from the solid-phase extraction, reduces the amount of base in the reaction, facilitates lower molar amounts of precursor, and reduces degradation.

The simplistic SiFA isotopic exchange can achieve high a degree of radiochemical incorporation of [18F]fluoride (60&#8722;90%) with a minimum amount of synthetic complexity (Figure 1). Most molecules can be radiolabeled with [18F]fluoride in one step without involving HPLC for purification (Figure 2). Radio-HPLC can be used for quality control purposes, wherein the ultraviolet (UV) absorbance peak of the final product should coincide with i...

Watch this Scientific Journal Video about 18F-Labeling of Radiotracers Functionalized with a Silicon Fluoride Acceptor SiFA for Positron Emission Tomography at JoVE.com

18F-Labeling of Radiotracers Functionalized with a Silicon Fluoride Acceptor SiFA for Positron Emission Tomography

The synthesis of fluorine-18 (18F) labeled radiopharmaceuticals for positron emission tomography typically requires months of experience. When incorporated into a radiotracer, the silicon-fluoride acceptor (SiFA) motif enables a simple 18F-labeling protocol that is independent of costly equipment and preparatory training, while reducing precursor quantity needed and utilizing milder reaction conditions.

18F-Labeling of Radiotracers Functionalized with a Silicon Fluoride Acceptor (SiFA) for Positron Emission Tomography

The para-substituted di-tert-butylfluorosilylbenzene structural motif known as the silicon-fluoride acceptor (SiFA) is a useful tag in the ...

The overall goal of the following procedure is to demonstrate the labeling of a ligand with the radionuclide fluorine-18, or F-18, using silicon fluoride acceptor compounds, hereafter referred to as SiFAs. Labeling a ligand with F-18 and injecting it into the body enables the imaging of numerous diseases with positron emission tomography, or PET. Fluorine-18 is among the most important radionuclides for PET imaging.It has a half-life of 109 minutes, and 97%of its decay is by positron emission, making it nearly perfect for PET imaging. Peptides and proteins are especially difficult to label with F-18 because they require building blocks formed by multi-step synthesis. Otherwise, macromolecules will constitute a large proportion of available PET tracers.To reduce the complexity of F-18 radiolabeling, silicon fluoride acceptors were introduced as a reliable tool. The SiFA group consists of a central silicon atom connected to two tertiary butyl groups, a derivatized phenyl moiety, and a fluorine atom. The two tertiary butyl groups impart hydrolytic stability to the silicon fluoride bond, which is a critical feature for in-vivo applications of SiFA conjugates as imaging agents.The phenyl moiety acts as a linker between the radionuclide and biologically active molecule, represented as R in this diagram. When attached to a biomolecule, the SiFA building blocks readily exchange fluorine-19 for radioactive fluorine-18 due to the low activation energy of the isotopic exchange reaction. The labeling precursor and F-18 labeled compound are chemically identical, which makes purification relatively simple.The non-canonical isotopic exchange labeling technique used with SiFA is also on par for ease of labeling with other novel labeling techniques such as trifluoroborate isotopic exchange and aluminum fluoride chelation. One must keep in mind that F-18 is a radioactive isotope. Therefore, it is necessary to carry out all procedures behind adequate shielding.Lead shielding is appropriate for this type of radiation. Be sure to wear radiation detection badges throughout the entirety of this procedure. Additionally, immediately dispose of gloves before touching anything after the synthesis as they may be contaminated with radioactivity.Utilize hand/foot monitors as well as pancake Geiger counters to check for contamination of sleeves, hands, and feet. A significant number of small organic molecules have been labeled with fluorine-18. However, interventional organic chemistry typically requires harsh reaction conditions to incorporate F-18 into these molecules.These conditions are usually incompatible with sensitive chemical functionalities and delicate macromolecules such as proteins and peptides. Therefore, novel methods of labeling these molecules are highly sought after. The main advantage of the SiFA technique is that it allows a complicated procedure to be completed within one or two steps with minimal purification so that F-18 radio-pharmaceuticals may be prepared with less training and experience.The implications of this technique extend to research groups interested in the in-vivo applications of experimental biomolecules. The SiFA labeling methodology utilizes F-18 fluoride, which is routinely produced in cyclotron facilities via the proton bombardment of O-18 water. For most F-18 reactions, the F-18 fluoride must first be separated from the cyclotron water to prepare an anhydrous organic stock solution of highly nucleophilic F-18 anions for reaction.This is commonly achieved through the trapping of F-18 fluoride on an anion exchange cartridge, eluting the fluoride with a base and cryptand dissolved in acetonitrile and azeotropically drying the resulting solution before re-suspension in the dry reaction solvent of choice. Start by preconditioning a QMA exchange cartridge with 5 molar potassium carbonate followed by deionized water. Next, pass an aqueous solution of F-18 fluoride through the preconditioned QMA cartridge in reverse using a male-to-male adapter as shown.If large amounts of radioactivity are to be handled, these steps can be performed using an automated synthesis module or by using additional shielding on the syringe. Discard the oxygen-18 water. Elute the first four drops of the fixed F-18 anions from the QMA cartridge with a prepared solution of kryptofix, potassium carbonate, and acetonitrile into a thick-walled V-vial and seal the vial.Place the vial in an oil bath heated to 90 degrees. Only the first four drops are used as the majority of radioactive fluoride is eluted off the QMA with these drops. This reduces the amount of base carried forward into our F-18 stock solution, which is necessary to avoid degradation of the SiFA moiety.Insert a vent needle and a needle connected to a stream of argon gas, then wait five minutes to evaporate the solvents. To remove traces of water, add acetonitrile to facilitate azeotropic evaporation. Complete this step twice to ensure dryness.After removing the argon and vent needles, re-suspend the dry fluoride residue in the solvent of choice, in this case acetonitrile, to create a stock solution of highly reactive F-18. This solution can now be used for labeling. Precondition a C18 light cartridge by rinsing it with ethanol and with distilled water.Add the F-18 fluoride stock solution to a reaction vial containing a SiFA labeled precursor. The entire stock solution can be added or an aliquot, depending on how much activity is desired for reaction. Allow the reaction to proceed for five minutes at room temperature without stirring.Drop the reaction mixture into a syringe containing 1 molar phosphate buffer. Pass the solution through the preconditioned C18 cartridge to trap the labeled tracer. Next, wash the cartridge with distilled water, then elute the tracer with ethanol.Dilute with sterile phosphate buffer for injection. Pass the resulting purified F-18 labeled tracer through a sterile filter. To obtain a clear PET image for small animal imaging, the partitioned patient dose should be between five to eight megabecquerel.For human use, the partitioned patient dose should be between 200 to 300 megabecquerel. Gather and inject a small aliquot of the F-18 labeled tracer into an HPLC system equipped with a reversed-phase C18 column to confirm that the radiochemical purity is greater than 95%The F-18 labeled SiFA tracer can be injected into an animal or human subject, and the dynamic data collected from a PET scanner can be reconstructed to create a time series of three-dimensional PET images. In one example, this SiFA-tagged small molecule tracer developed for prostate cancer imaging has been successfully utilized to visualize tumors implanted in mice for preclinical studies.The SiFA tag has also been shown to be suitable for radiolabeling, cancer targeting peptides such as tyrosine-3-octreotate or TATE. The F-18 labeled SiFAlin-TATE tracer shown here has been used to visualize neuroendocrine tumors in cancer patients. SiFA labeling chemistry alongside trifluoroborates and aluminum fluoride chelates represents one of the first F-18 labeling methods employing extraordinarily efficient isotopic exchange reaction at room temperature or below.The method can be completed in as little as 30 minutes, which, compared to conventional radiolabeling procedures, minimizes chemical consumption and radioactive exposure.

Research

JoVE Journal

Chemistry

Microwave-assisted Intramolecular Dehydrogenative Diels-Alder Reactions for the Synthesis of Functionalized Naphthalenes/Solvatochromic Dyes

Functionalized naphthalenes have applications in a variety of research fields ranging from the synthesis of natural or biologically active molecules to ...

Synthesis and Characterization of Functionalized Metal-organic Frameworks

Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and ...

Preparation of Mica and Silicon Substrates for DNA Origami Analysis and Experimentation

The designed nature and controlled, one-pot synthesis of DNA origami provides exciting opportunities in many fields, particularly nanoelectronics. Many of ...

Atom Transfer Radical Polymerization of Functionalized Vinyl Monomers Using Perylene as a Visible Light Photocatalyst

A standardized technique for atom transfer radical polymerization of vinyl monomers using perylene as a visible-light photocatalyst is presented. The ...

Preparation of a Corannulene-functionalized Hexahelicene by Copper(I)-catalyzed Alkyne-azide Cycloaddition of Nonplanar Polyaromatic Units

Preparation of a Corannulene-functionalized Hexahelicene by CopperI-catalyzed Alkyne-azide Cycloaddition of Nonplanar Polyaromatic Units

The main purpose of this video is to show 6 reaction steps of a convergent synthesis and prepare a complex molecule containing up to three nonplanar ...

Automation of a Positron-emission Tomography (PET) Radiotracer Synthesis Protocol for Clinical Production

Automation of a Positron-emission Tomography PET Radiotracer Synthesis Protocol for Clinical Production

The development of new positron-emission tomography (PET) tracers is enabling researchers and clinicians to image an increasingly wide array of biological ...

Methionine Functionalized Biocompatible Block Copolymers for Targeted Plasmid DNA Delivery

Reversible addition-fragmentation chain transfer (RAFT) polymerization integrates the advantages of radical polymerization and living polymerization. This ...

Preparation of Poly(pentafluorophenyl acrylate) Functionalized SiO2 Beads for Protein Purification

Preparation of Polypentafluorophenyl acrylate Functionalized SiO2 Beads for Protein Purification

We demonstrate a simple method to prepare poly(pentafluorophenyl acrylate) (poly(PFPA)) grafted silica beads for antibody immobilization and subsequent ...

Efficient Synthesis of All-Carbon Quaternary Centers via the Conjugate Addition of Functionalized Monoorganozinc Bromides

The conjugate addition of organometallic reagents to &#945;,&#946;-unsaturated carbonyls represents an important method to generate C&#8211;C bonds in the ...

Luminescence Lifetime Imaging of O2 with a Frequency-Domain-Based Camera System

Luminescence Lifetime Imaging of O2 with a Frequency-Domain-Based Camera System

We describe a method to image dissolved oxygen (O2), in 2D at high spatial (&#60; 50-100 &#181;m) and temporal (&#60; 10 s) resolution. The method employs ...