Name: f&#246;rster resonance energy transfer mapping: a new methodology to elucidate global structural features
Uploaded: 2022-03-16T13:45:00
Description: Watch this Scientific Journal Video about FÃ¶rster Resonance Energy Transfer Mapping: A New Methodology to Elucidate Global Structural Features at JoVE.com

This work was supported by National Institutes of Health grant R15GM135904 (awarded to IM) and National Institutes of Health Grant GM110552 (awarded to DBO).

1. Selection of labeling sites
<ol>
	<li>Identify at least three potential labeling sites to triangulate the putative binding site on the existing protein structures. In this case, SecA, SecYEG, and preprotein attached to SecA through genetic fusion were identified2.
	<ol>
		<li>Choose labeling sites within 25-75 &#197; of the putative binding site and in relatively static regions of the protein, the distance will determine the specific FRET dye pair to be used...

Through the use of the FRET mapping methodology, we identified the signal sequence binding site on the SecA protein. Importantly, the presence of a 3-D crystal structure of the complex greatly facilitated our study. The strength of this mapping methodology lies in the ability to use an existing structure to identify locations for labeling. This methodology cannot be used to determine a 3-D structure; however, determination of structural elements56, refinement of an existing structure<sup class="xr...

For proteins, elucidation of dynamics along with 3-dimensional (3-D) structural knowledge leads to an enhanced understanding of structure-function relationships of biomolecular systems. Structural methods, such as X-ray crystallography and cryogenic electron microscopy, capture a static structure and often require the determination of multiple structures to elucidate aspects of biomolecule binding and dynamics1. This article discusses a solution-based method for mapping global structural elements, such as binding sites or binding interactions, that are potentially more transient and less easily captured by static methods. Strong candidate systems for this methodology are ones in which a 3-D structure has been previously determined by X-ray crystallography, NMR spectroscopy, or other structural methods. In this case, we take advantage of the X-ray crystal structure of the SecA-SecYEG complex, a central player in the protein general secretory pathway, to map the location of a signal peptide binding site using F&#246;rster resonance energy transfer (FRET) prior to the transport of the preprotein across the membrane2. Manipulation of the biological system through genetic modifications coupled with our knowledge of the 3-D structure enabled the determination of the conformation of the signal sequence and early mature region immediately prior to insertion into the channel 3.
FRET involves the radiation-less transfer of energy from one molecule (donor) to another (acceptor) in a distance-dependent fashion that is through space4,5. The efficiency of this transfer is monitored through either a decrease in donor or an increase in acceptor fluorescence intensity. The efficiency of energy transfer can be described as
E = R06/(R06 + R6)
in which the R0 value is the distance at which the transfer is 50% efficient6. The technique has previously been described as a molecular ruler and is effective at determining distances in the 2.5-12 nm range, depending on the identity of the donor-acceptor dyes4,7,8,9. The donor fluorescence intensities and lifetimes with or without acceptor allow determination of transfer efficiencies and consequently, distances5,8. Due to the availability of the technology, sensitivity of the method, and ease of use, FRET has also found broad application in such areas as single-molecule fluorescence spectroscopy and confocal microscopy6. The advent of fluorescent proteins such as green fluorescent protein has made the observation of intracellular dynamics and live-cell imaging relatively facile10,11. Many FRET applications such as these are discussed in detail in this virtual issue.
In this study, we particularly focus on the use of FRET measurements to yield distance values to determine structural details. Previously, FRET measurements have been effectively used to determine the conformation of DNA molecules when bound to protein12,13,14, the internal dynamics of proteins, and protein binding interactions15,16,17. The advantages of this method lie in the ability to determine flexible and dynamic structural elements in a solution with relatively low amounts of material. Significantly, this method is particularly effective when used in conjunction with existing structural information and cannot be used as a means of 3-D structure determination. The method provides the best insight and refinement of structure if the work builds on existing structural information often coupled with computational simulation18,19. Here, the use of distances obtained from steady-state and time-resolved FRET measurements is described to map a binding site, the location of which was not known, on an existing crystallographic structure of the SecA-SecYEG complex, major proteins in the general secretory pathway3.
The general secretory pathway, a highly conserved system from prokaryotes to eukaryotes to archaea, mediates the transport of proteins either across or into the membrane to their functional location in the cell. For Gram-negative bacteria, such as E. coli, the organism used in our study, proteins are inserted into or translocated across the inner membrane to the periplasm. The bacterial SecY channel complex (termed the translocon) coordinates with other proteins to translocate the newly synthesized protein, which is directed to its correct location in the cell through a signal sequence typically located at the N-terminus20,21. For proteins bound for the periplasm, the ATPase SecA protein associates with the exit tunnel of the ribosome, and with the preprotein after approximately 100 residues have been translated22. Along with the SecB chaperone protein, it maintains the preprotein in an unfolded state. SecA binds to the SecYEG translocon, and through many cycles of ATP hydrolysis, facilitates protein transport across the membrane23,24.
SecA is a multi-domain protein that exists in cytosolic and membrane-bound forms. A homodimeric protein in the cytosol, SecA consists of a preprotein binding or cross-linking domain25, two nucleotide-binding domains, a helical wing domain, a helical scaffold domain, and the two helix finger (THF)26,27,28,29 (Figure 1). In previous crystallographic studies of the SecA-SecYEG complex, the location of the THF suggested that it was actively involved in protein translocation and subsequent cross-linking experiments with the signal peptide further established the significance of this region in protein translocation30,31. Previous studies, using the FRET mapping methodology, demonstrated that exogenous signal peptides bind to this region of SecA2,32. To fully understand the conformation and location of the signal sequence and early mature region of the preprotein prior to insertion into the SecYEG channel, a protein chimera in which the signal sequence and residues of the early mature region were attached to SecA through a Ser-Gly linker was created (Figure 1). Using this biologically viable construct, it was further demonstrated that the signal sequence and early mature region of the preprotein bind to the THF in a parallel fashion2. Subsequently, the FRET mapping methodology was used to elucidate the conformation and location of the signal sequence and early mature region in the presence of SecYEG as described below3.
Knowledge of the 3-D structure of the SecA-SecYEG complex33,34,35 and the possible location of the binding site allowed us to judiciously place donor-acceptor labels in locations where the intersection of individual FRET distances identifies the binding site location. These FRET mapping measurements revealed that the signal sequence and the early mature region of the preprotein form a hairpin with the tip located at the mouth of the SecYEG channel, demonstrating that the hairpin structure is templated prior to channel insertion.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>490 nm LED laser</td>
			<td>Horiba</td>
			<td>1684-LED</td>
			<td></td>
		</tr>
		<tr>
			<td>Alexa Fluor 647 C2 Maleimide//DIBO Alkyne</td>
			<td>Life Technologies</td>
			<td>A20347</td>
			<td></td>
		</tr>
		<tr>
			<td>Agar</td>
			<td>Difco</td>
			<td>DF0812</td>
			<td></td>
		</tr>
		<tr>
			<td>Alexa Fluor 488 C5 Maleimide/DIBO Alkyne</td>
			<td>Life Technologies</td>
			<td>A10254</td>
			<td></td>
		</tr>
		<tr>
			<td>Alexa Fluor 488 DIBO Alkyne</td>
			<td>Life Technologies</td>
			<td>S10904</td>
			<td></td>
		</tr>
		<tr>
			<td>Alexa Fluor 647 DIBO Alkyne</td>
			<td>Life Technologies</td>
			<td>S10906</td>
			<td></td>
		</tr>
		<tr>
			<td>Amicon Ultra&#173;4 Centrifugal filter (50kDa MWCO)</td>
			<td>Sigma</td>
			<td>UFC805008</td>
			<td></td>
		</tr>
		<tr>
			<td>Dodecylmaltoside (DDM)</td>
			<td>Anatrace</td>
			<td>D310</td>
			<td></td>
		</tr>
		<tr>
			<td>E. coli alkaline phosphatase signal peptide SP22</td>
			<td>Biomolecules Midwest</td>
			<td>N/A</td>
			<td>Synthesized custom item</td>
		</tr>
		<tr>
			<td>extended signal peptide SP41</td>
			<td>Biomolecules Midwest</td>
			<td>N/A</td>
			<td>Synthesized custom item</td>
		</tr>
		<tr>
			<td>FluorEssence</td>
			<td>Horiba</td>
			<td>version 2.4</td>
			<td>spectral acquisition program for Fluoromax4 spectrofluorometer</td>
		</tr>
		<tr>
			<td>Fluoromax 4 spectrofluorometer</td>
			<td>Horiba</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr>
			<td>GlobalsWE</td>
			<td>Laboratory for Fluorescence Dynamics, University of California, Irvine</td>
			<td></td>
			<td>spectral analysis program for time-resolved decays</td>
		</tr>
		<tr>
			<td>H&#173;4&#173;Azido&#173;Phe&#173;OH</td>
			<td>BACHEM</td>
			<td>4020250.0001</td>
			<td></td>
		</tr>
		<tr>
			<td>LB (Miller) Broth</td>
			<td>Fisher Scientific</td>
			<td>BP9723</td>
			<td></td>
		</tr>
		<tr>
			<td>Ludox HS-40 colloidal silica (40 wt.% suspension in H2O)</td>
			<td>Sigma-Aldrich</td>
			<td>420816</td>
			<td>dilution is needed to make a proper scattering solution</td>
		</tr>
		<tr>
			<td>PTI Felix GX</td>
			<td>Horiba</td>
			<td>version 4.1.0.4096</td>
			<td>spectral acquisition program for PTI Time Master Instrument</td>
		</tr>
		<tr>
			<td>PTI Time Master Instrument</td>
			<td>Horiba</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr>
			<td>Pymol Molecular Graphics Program</td>
			<td>Schrodinger</td>
			<td>version 2.4</td>
			<td></td>
		</tr>
		<tr>
			<td>Water bath</td>
			<td>Thermo Scientific</td>
			<td>NESLAB RTE 10</td>
			<td></td>
		</tr>
	</tbody>
</table>

f&#246;rster resonance energy transfer mapping: a new methodology to elucidate global structural features

F&#246;rster resonance energy transfer (FRET) is an established fluorescence-based method used to successfully measure distances in and between biomolecules in vitro as well as within cells. In FRET, the efficiency of energy transfer, measured by changes in fluorescence intensity or lifetime, relates to the distance between two fluorescent molecules or labels. Determination of dynamics and conformational changes from the distances are just some examples of applications of this method to biological systems. Under certain conditions, this methodology can add to and enhance existing X-ray crystal structures by providing information regarding dynamics, flexibility, and adaptation to binding surfaces. We describe the use of FRET and associated distance determinations to elucidate structural properties, through the identification of a binding site or the orientations of dimer subunits. Through judicious choice of labeling sites, and often employment of multiple labeling strategies, we have successfully applied these mapping methods to determine global structural properties in a protein-DNA complex and the SecA-SecYEG protein translocation system. In the SecA-SecYEG system, we have used FRET mapping methods to identify the preprotein-binding site and determine the local conformation of the bound signal sequence region. This study outlines the steps for performing FRET mapping studies, including identification of appropriate labeling sites, discussion of possible labels including non-native amino acid residues, labeling procedures, how to perform measurements, and interpreting the data.

This study focused on determining the location of the preprotein binding site on SecA prior to insertion of the preprotein into the SecYEG channel. To map the binding site, FRET experiments were performed between different regions of the preprotein and three distinct locations on the SecA and SecYEG proteins (Figure 1A-D). From the distances obtained and three-dimensional structures of SecA, SecYEG, and the preprotein, the location of the preprotein binding ...

Watch this Scientific Journal Video about FÃ¶rster Resonance Energy Transfer Mapping: A New Methodology to Elucidate Global Structural Features at JoVE.com

F&amp;#246;rster Resonance Energy Transfer Mapping: A New Methodology to Elucidate Global Structural Features

The study details the methodology of FRET mapping including the selection of labeling sites, choice of dyes, acquisition, and data analysis. This methodology is effective at determining binding sites, conformational changes, and dynamic motions in protein systems and is most useful if performed in conjunction with existing 3-D structural information.

F&#246;rster Resonance Energy Transfer Mapping: A New Methodology to Elucidate Global Structural Features

F&#246;rster resonance energy transfer (FRET) is an established fluorescence-based method used to successfully measure distances in and between ...

We have developed a FRET mapping methodology that allows the identification and characterization of ligand binding sites, subunit orientation, conformational changes associated with ligand binding, and dynamic motions of proteins. An advantage of this technique is it can be performed in solution and the molecules can move around freely. The distances measured by this technique are appropriate for biological systems.FRET is broadly applicable to many systems. Mapping enhances the monitoring of structural and dynamic changes in any biomolecular system, and is particularly effective if three-dimensional structural information exists. After purifying the protein, the hardest part is labeling with high efficiency, and removing the free dye.For the experiments, it helps to have as little free dye as possible. To begin, choose labeling sites within 25 to 75 angstrom of the punitive binding site, and in relatively static regions of the protein. The distance will determine the specific FRET dye pair to be used.Locate the labeling sites in protein regions that are relatively distinct from each other. So the sites describe the vertices of a triangle, with the punitive binding site located in the center. To measure the R0 values, depending upon the desired cuvette size and volume, prepare two protein samples at the same concentration of total protein.One with the protein labeled with the donor dye only, and one with the protein labeled with the acceptor dye only. Turn on the fluorometer and open the spectral acquisition and analysis program in the FluorEssence software, if using a spectrofluorometer. Click on the red M to connect the computer to the instrument and choose Emission spectra.Enter scan parameters using the collect experiment menu item, such as excitation wavelength, the range for emission scan, temperature, and sample change your position. Click on RTC and optimized instrument settings as described in the manuscript, by monitoring the fluorescence emission at the peak using an excitation wavelength set at the dye's absorption maximum. Place the donor labeled protein sample in the sample holder, and click run to generate an emission scan of the protein labeled with the donor dye only, by exciting the sample at the dye absorption maximum, and scanning over the emission peak.Establish a baseline for the scan by extending the scan at 25 to 50 nanometers past the end of the peak. Measure the quantum yield of the donor only protein by performing absorptions and fluorescence measurements on samples of different concentrations, as described in the text manuscript. Prepare donor only protein, acceptor only protein, and donor-acceptor protein samples, at the same concentration.Obtain the donor only scan to generate fluorescence emission spectra. Excite the solution at the donor dye absorption maximum, and scan over the donor and acceptor emission peaks. Either exchange the sample to the acceptor only protein, or change the sample change your position to the cuvette containing the acceptor only protein.Obtain an emission scan of the protein labeled with the acceptor dye only. Excite the sample at the donor excitation wavelength. Exchange the sample to the donor-acceptor protein sample or change the sample change your position to the cuvette containing the donor-acceptor labeled protein.Obtain an emission scan of the donor-acceptor protein sample using the same settings. For all spectra, correct background fluorescence by subtracting the background counts measured at the end of the scan. Use a 3D graphical viewing program such as PyMOL to map the distances onto the structure, by directly entering the commands from the script into the command window with the appropriate distance information.Generate a shell for each distance measured, and the associated error. Map the position through the intersection of the different shells. The signal peptide binding site was mapped using three different locations on SecA and SecYEG, and four different locations on the signal peptide.FRET experiments between different regions of the pre-protein and three distinct locations on the SecA and SecYEG proteins map the pre-protein binding site and orientation. The punitive binding site of the signal peptide was previously identified as the two-helix finger, and the SecA C-terminal tail suggested an orientation parallel to the two-helix finger. Steady state FRET spectra between SecA37, and PhoA2, and PhoA22, were obtained.Reduction in the donor intensity indicated that greater energy transferred from PhoA22. Relative to the PhoA2 site, which is located further away from SecA37. Time resolved fluorescence decay spectra demonstrated that the donor-acceptor complex has a shorter homogenous decay consistent with energy transfer associated with one distance.FRET distance shells constructed between the SecA PhoA2 residue, and the triangulated sites, demonstrated that each shell intersects with the two-helix finger, the assumed binding site, which is shown in green. The intersected area is smaller than each FRET shell and includes a large contribution from the helical scaffold. FRET distance shells determined between the PhoA2 residue and the labeled sites, describe a smaller area located closer to the tip of the two-helix finger and the mouth of the SecYEG channel.This intersected area is situated at the opposite end of the two-helix finger from PhoA2. Important things to consider include proper selection of the labeling sites to triangulate the area of interest, to measure the quantum yields for each site, and remove all the free dye. This method aligns with structural information obtained with methods like NMR or X-ray crystallography.When the FRET results are put into a structural context it can enhance the existing information.

forster-resonance-energy-transfer-mapping-new-methodology-to

Research

JoVE Journal

Biochemistry

Protein Complex Affinity Capture from Cryomilled Mammalian Cells

Affinity capture is an effective technique for isolating endogenous protein complexes for further study. When used in conjunction with an antibody, this technique is also frequently referred to as immunoprecipitation. Affinity capture can be applied in a bench-scale and in a high-throughput context. When coupled with protein mass spectrometry, affinity capture has proven to be a workhorse of interactome analysis. Although there are potentially many ways to execute the numerous steps involved, the following protocols implement our favored methods. Two features are distinctive: the use of cryomilled cell powder to produce cell extracts, and antibody-coupled paramagnetic beads as the affinity medium. In many cases, we have obtained superior results to those obtained with more conventional affinity capture practices. Cryomilling avoids numerous problems associated with other forms of cell breakage. It provides efficient breakage of the material, while avoiding denaturation issues associated with heating or foaming. It retains the native protein concentration up to the point of extraction, mitigating macromolecular dissociation. It reduces the time extracted proteins spend in solution, limiting deleterious enzymatic activities, and it may reduce the non-specific adsorption of proteins by the affinity medium. Micron-scale magnetic affinity media have become more commonplace over the last several years, increasingly replacing the traditional agarose- and Sepharose-based media. Primary benefits of magnetic media include typically lower non-specific protein adsorption; no size exclusion limit because protein complex binding occurs on the bead surface rather than within pores; and ease of manipulation and handling using magnets.

Here we describe protocols to disrupt mammalian cells by solid-state milling at a cryogenic temperature, produce a cell extract from the resulting cell powder, and isolate protein complexes of interest by affinity capture upon antibody-coupled micron-scale paramagnetic beads.

Affinity capture is an effective technique for isolating endogenous protein complexes for further study. When used in conjunction with an antibody, this ...

Using Scaffold Liposomes to Reconstitute Lipid-proximal Protein-protein Interactions In Vitro

Studies of integral membrane proteins in vitro are frequently complicated by the presence of a hydrophobic transmembrane domain. Further complicating these studies, reincorporation of detergent-solubilized membrane proteins into liposomes is a stochastic process where protein topology is impossible to enforce. This paper offers an alternative method to these challenging techniques that utilizes a liposome-based scaffold. Protein solubility is enhanced by deletion of the transmembrane domain, and these amino acids are replaced with a tethering moiety, such as a His-tag. This tether interacts with an anchoring group (Ni2+ coordinated by nitrilotriacetic acid (NTA(Ni2+)) for His-tagged proteins), which enforces a uniform protein topology at the surface of the liposome. An example is presented wherein the interaction between Dynamin-related protein 1 (Drp1) with an integral membrane protein, Mitochondrial Fission Factor (Mff), was investigated using this scaffold liposome method. In this work, we have demonstrated the ability of Mff to efficiently recruit soluble Drp1 to the surface of liposomes, which stimulated its GTPase activity. Moreover, Drp1 was able to tubulate the Mff-decorated lipid template in the presence of specific lipids. This example demonstrates the effectiveness of scaffold liposomes using structural and functional assays and highlights the role of Mff in regulating Drp1 activity.

Using Scaffold Liposomes to Reconstitute Lipid-proximal Protein-protein Interactions In Vitro

This paper describes a method for assessing the interactions and assemblies of integral membrane proteins in vitro with various partner factors in a lipid-proximal environment.

Studies of integral membrane proteins in vitro are frequently complicated by the presence of a hydrophobic transmembrane domain. Further complicating ...

Atomic Scale Structural Studies of Macromolecular Assemblies by Solid-state Nuclear Magnetic Resonance Spectroscopy

Supramolecular protein assemblies play fundamental roles in biological processes ranging from host-pathogen interaction, viral infection to the propagation of neurodegenerative disorders. Such assemblies consist in multiple protein subunits organized in a non-covalent way to form large macromolecular objects that can execute a variety of cellular functions or cause detrimental consequences. Atomic insights into the assembly mechanisms and the functioning of those macromolecular assemblies remain often scarce since their inherent insolubility and non-crystallinity often drastically reduces the quality of the data obtained from most techniques used in structural biology, such as X-ray crystallography and solution Nuclear Magnetic Resonance (NMR). We here present magic-angle spinning solid-state NMR spectroscopy (SSNMR) as a powerful method to investigate structures of macromolecular assemblies at atomic resolution. SSNMR can reveal atomic details on the assembled complex without size and solubility limitations. The protocol presented here describes the essential steps from the production of 13C/15N isotope-labeled macromolecular protein assemblies to the acquisition of standard SSNMR spectra and their analysis and interpretation. As an example, we show the pipeline of a SSNMR structural analysis of a filamentous protein assembly.

Structures of supramolecular protein assemblies at atomic resolution are of high relevance because of their crucial roles in a variety of biological phenomena. Herein, we present a protocol to perform high-resolution structural studies on insoluble and non-crystalline macromolecular protein assemblies by magic-angle spinning solid-state nuclear magnetic resonance spectroscopy (MAS SSNMR).

Supramolecular protein assemblies play fundamental roles in biological processes ranging from host-pathogen interaction, viral infection to the ...

Quantitative Immunofluorescence to Measure Global Localized Translation

The mechanisms regulating mRNA translation are involved in various biological processes, such as germ line development, cell differentiation, and organogenesis, as well as in multiple diseases. Numerous publications have convincingly shown that specific mechanisms tightly regulate mRNA translation. Increased interest in the translation-induced regulation of protein expression has led to the development of novel methods to study and follow de novo protein synthesis in cellulo. However, most of these methods are complex, making them costly and often limiting the number of mRNA targets that can be studied. This manuscript proposes a method that requires only basic reagents and a confocal fluorescence imaging system to measure and visualize the changes in mRNA translation that occur in any cell line under various conditions. This method was recently used to show localized translation in the subcellular structures of adherent cells over a short period of time, thus offering the possibility of visualizing de novo translation for a short period during a variety of biological processes or of validating changes in translational activity in response to specific stimuli.

This manuscript describes a method to visualize and quantify localized translation events in subcellular compartments. The approach proposed in this manuscript requires a basic confocal imaging system and reagents and is rapid and cost-effective.

The mechanisms regulating mRNA translation are involved in various biological processes, such as germ line development, cell differentiation, and ...

Electrochemical Detection of Deuterium Kinetic Isotope Effect on Extracellular Electron Transport in Shewanella oneidensis MR-1

Direct electrochemical detection of c-type cytochrome complexes embedded in the bacterial outer membrane (outer membrane c-type cytochrome complexes; OM c-Cyts) has recently emerged as a novel whole-cell analytical method to characterize the bacterial electron transport from the respiratory chain to the cell exterior, referred to as the extracellular electron transport (EET). While the pathway and kinetics of the electron flow during the EET reaction have been investigated, a whole-cell electrochemical method to examine the impact of cation transport associated with EET has not yet been established. In the present study, an example of a biochemical technique to examine the deuterium kinetic isotope effect (KIE) on EET through OM c-Cyts using a model microbe, Shewanella oneidensis MR-1, is described. The KIE on the EET process can be obtained if the EET through OM c-Cyts acts as the rate-limiting step in the microbial current production. To that end, before the addition of D2O, the supernatant solution was replaced with fresh media containing a sufficient amount of the electron donor to support the rate of upstream metabolic reactions, and to remove the planktonic cells from a uniform monolayer biofilm on the working electrode. Alternative methods to confirm the rate-limiting step in microbial current production as EET through OM c-Cyts are also described. Our technique of a whole-cell electrochemical assay for investigating proton transport kinetics can be applied to other electroactive microbial strains.

Electrochemical Detection of Deuterium Kinetic Isotope Effect on Extracellular Electron Transport in Shewanella oneidensis MR-1

Here we present a protocol of whole-cell electrochemical experiments to study the contribution of proton transport to the rate of extracellular electron transport via the outer-membrane cytochromes complex in Shewanella oneidensis MR-1.

Direct electrochemical detection of c-type cytochrome complexes embedded in the bacterial outer membrane (outer membrane c-type cytochrome complexes; OM ...

Using In Vitro Fluorescence Resonance Energy Transfer to Study the Dynamics Of Protein Complexes at a Millisecond Time Scale

Proteins are the primary operators of biological systems, and they usually interact with other macro- or small molecules to carry out their biological functions. Such interactions can be highly dynamic, meaning the interacting subunits are constantly associated and dissociated at certain rates. While measuring the binding affinity using techniques such as quantitative pull-down reveals the strength of the interaction, studying the binding kinetics provides insights on how fast the interaction occurs and how long each complex can exist. Furthermore, measuring the kinetics of an interaction in the presence of an additional factor, such as a protein exchange factor or a drug, helps reveal the mechanism by which the interaction is regulated by the other factor, providing important knowledge for the advancement of biological and medical research. Here, we describe a protocol for measuring the binding kinetics of a protein complex that has a high intrinsic association rate and can be dissociated quickly by another protein. The method uses fluorescence resonance energy transfer to report the formation of the protein complex in vitro, and it enables monitoring the fast association and dissociation of the complex in real time on a stopped-flow fluorimeter. Using this assay, the association and dissociation rate constants of the protein complex are quantified.

Protein-protein interactions are critical for biological systems, and studies of the binding kinetics provide insights into the dynamics and function of protein complexes. We describe a method that quantifies the kinetic parameters of a protein complex using fluorescence resonance energy transfer and the stopped-flow technique. &#160;

Proteins are the primary operators of biological systems, and they usually interact with other macro- or small molecules to carry out their biological ...

Removal and Replacement of Endogenous Ligands from Lipid-Bound Proteins and Allergens

Many major allergens bind to hydrophobic lipid-like molecules, including Mus m 1, Bet v 1, Der p 2, and Fel d 1. These ligands are strongly retained and have the potential to influence the sensitization process either through directly stimulating the immune system or altering the biophysical properties of the allergenic protein. In order to control for these variables, techniques are required for the removal of endogenously bound ligands and, if necessary, replacement with lipids of known composition. The cockroach allergen Bla g 1 encloses a large hydrophobic cavity which binds a heterogeneous mixture of endogenous lipids when purified using traditional techniques. Here, we describe a method through which these lipids are removed using reverse-phase HPLC followed by thermal annealing to yield Bla g 1 in either its Apo-form or reloaded with a user-defined mixture of fatty acid or phospholipid cargoes. Coupling this protocol with biochemical assays reveal that fatty acid cargoes significantly alter the thermostability and proteolytic resistance of Bla g 1, with downstream implications for the rate of T-cell epitope generation and allergenicity. These results highlight the importance of lipid removal/reloading protocols such as the one described herein when studying allergens from both recombinant and natural sources. The protocol is generalizable to other allergen families including lipocalins (Mus m 1), PR-10 (Bet v 1), MD-2 (Der p 2) and Uteroglobin (Fel d 1), providing a valuable tool to study the role of lipids in the allergic response.

This protocol describes the removal of endogenous lipids from allergens, and their replacement with user-specified ligands through reverse-phase HPLC coupled with thermal annealing. 31P-NMR and circular dichroism allow for the rapid confirmation of ligand removal/loading, and the recovery of native allergen structure.

Many major allergens bind to hydrophobic lipid-like molecules, including Mus m 1, Bet v 1, Der p 2, and Fel d 1. These ligands are strongly retained and ...

NMR-Based Fragment Screening in a Minimum Sample but Maximum Automation Mode

Fragment-based screening (FBS) is a well-validated and accepted concept within the drug discovery process both in academia and industry. The greatest advantage of NMR-based fragment screening is its ability not only to detect binders over 7-8 orders of magnitude of affinity but also to monitor purity and chemical quality of the fragments and thus to produce high quality hits and minimal false positives or false negatives. A prerequisite within the FBS is to perform initial and periodic quality control of the fragment library, determining solubility and chemical integrity of the fragments in relevant buffers, and establishing multiple libraries to cover diverse scaffolds to accommodate various macromolecule target classes (proteins/RNA/DNA). Further, an extensive NMR-based screening protocol optimization with respect to sample quantities, speed of acquisition and analysis at the level of biological construct/fragment-space, in condition-space (buffer, additives, ions, pH, and temperature) and in ligand-space (ligand analogues, ligand concentration) is required. At least in academia, these screening efforts have so far been undertaken manually in a very limited fashion, leading to limited availability of screening infrastructure not only in the drug development process but also in the context of chemical probe development. In order to meet the requirements economically, advanced workflows are presented. They take advantage of the latest state-of-the-art advanced hardware, with which the liquid sample collection can be filled in a temperature-controlled fashion into the NMR-tubes in an automated manner. 1H/19F NMR ligand-based spectra are then collected at a given temperature. High-throughput sample changer (HT sample changer) can handle more than 500 samples in temperature-controlled blocks. This together with advanced software tools speeds up data acquisition and analysis. Further, application of screening routines on protein and RNA samples are described to make aware of the established protocols for a broad user base in biomacromolecular research.

Fragment-based screening by NMR is a robust method to rapidly identify small molecule binders to biomacromolecules (DNA, RNA, or proteins). Protocols describing automation-based sample preparation, NMR experiments &#38; acquisition conditions, and analysis workflows are presented. The technique allows for optimal exploitation of both 1H and 19F NMR-active nuclei for detection.

Fragment-based screening (FBS) is a well-validated and accepted concept within the drug discovery process both in academia and industry. The greatest ...

Single Molecule Fluorescence Energy Transfer Study of Ribosome Protein Synthesis

The ribosome is a large ribonucleoprotein complex that assembles proteins processively along mRNA templates. The diameter of the ribosome is approximately 20 nm to accommodate large tRNA substrates at the A-, P- and E-sites. Consequently, the ribosome dynamics are naturally de-phased quickly. Single molecule method can detect each ribosome separately and distinguish inhomogeneous populations, which is essential to reveal the complicated mechanisms of multi-component systems. We report the details of a smFRET method based on the Nikon Ti2 inverted microscope to probe the ribosome dynamics between the ribosomal protein L27 and tRNAs. The L27 is labeled at its unique Cys 53 position and reconstituted into a ribosome that is engineered to lack L27. The tRNA is labeled at its elbow region. As the tRNA moves to different locations inside the ribosome during the elongation cycle, such as pre- and post- translocation, the FRET efficiencies and dynamics exhibit differences, which have suggested multiple subpopulations. These subpopulations are not detectable by ensemble methods. The TIRF-based smFRET microscope is built on a manual or motorized inverted microscope, with home-built laser illumination. The ribosome samples are purified by ultracentrifugation, loaded into a home-built multi-channel sample cell and then illuminated via an evanescent laser field. The reflection laser spot can be used to achieve feedback control of perfect focus. The fluorescence signals are separated by a motorized filter-turret and collected by two digital CMOS cameras. The intensities are retrieved via the NIS-Elements software.

Single molecule fluorescence energy transfer is a method that tracks the tRNA dynamics during ribosomal protein synthesis. By tracking individual ribosomes, inhomogeneous populations are identified, which shed light on mechanisms. This method can be used to track biological conformational changes in general to reveal dynamic-function relationships in many other complexed biosystems. Single molecule methods can observe non-rate limiting steps and low-populated key intermediates, which are not accessible by conventional ensemble methods due to the average effect.

The ribosome is a large ribonucleoprotein complex that assembles proteins processively along mRNA templates. The diameter of the ribosome is approximately ...

F&#246;rster Resonance Energy Transfer Measurements in Living Plant Cells

Sensitized emission-based F&#246;rster resonance energy transfer (FRET) experiments are easily done but depend on the microscopic setup. Confocal laser scanning microscopes have become a workhorse for biologists. Commercial systems offer high flexibility in laser power adjustment and detector sensitivity and often combine different detectors to obtain the perfect image. However, the comparison of intensity-based data from different experiments and setups is often impossible due to this flexibility. Biologist-friendly procedures are of advantage and allow for simple and reliable adjustment of laser and detector settings. 
Furthermore, as FRET experiments in living cells are affected by the variability in protein expression and donor-acceptor ratios, protein expression levels must be considered for data evaluation. Described here is a simple protocol for reliable and reproducible FRET measurements, including routines for the estimation of protein expression and adjustment of laser intensity and detector settings. Data evaluation will be performed by calibration with a fluorophore fusion of known FRET efficiency. To improve simplicity, correction factors have been compared that have been obtained in cells and by measuring recombinant fluorescent proteins.

F&amp;#246;rster Resonance Energy Transfer Measurements in Living Plant Cells

A protocol is provided for setting up a standard confocal laser-scanning microscope for in vivo F&#246;rster resonance energy transfer measurements, followed by data evaluation.

Sensitized emission-based F&#246;rster resonance energy transfer (FRET) experiments are easily done but depend on the microscopic setup. Confocal laser ...