qdnb-antibody conjugates preparation using one-step emulsion evaporation method

Nanoperlas de puntos cuánticos para mejorar la sensibilidad en la detección de biomarcadores

Lateral flow immunoassay (LFIA) strips serve as crucial rapid detection tools at point-of-care1,2, particularly in disease screening during epidemics. However, traditional colloidal gold-based LFIA test strips exhibit low detection sensitivity and only provide qualitative results3. To enhance the detection sensitivity of LFIA, various new nanoparticles have emerged, including colored latex4,5, upconversion fluorescent nanoparticles6, time-resolved fluorescent microspheres7,8, and quantum dots9,10,11. Quantum dots (QDs)12,13, also known as semiconductor nanocrystals, offer tunable emission wavelengths, a wide excitation range, and high luminescence efficiency, making them ideal labels for biological imaging.
However, the fluorescence signal emitted by individual quantum dots remains weak, resulting in relatively low detection sensitivity in immunoassays. Encapsulation of numerous quantum dots within microspheres can amplify signals and improve the sensitivity of quantum dot-based immunoassays. Various methods, such as layer-by-layer self-assembly14,15,16,17,18, the swelling method19,20, and silica microsphere21,22,23,24 encapsulation, have been employed to encapsulate quantum dots inside microspheres. For example, quantum dot-functionalized silica nanosphere labels can be achieved by increasing QD loading per sandwiched immunoreaction25. A spray dryer equipped with an ultrasonic atomizer has also been used to prepare nanoscale QD-BSA nanospheres26. However, the aforementioned methods suffer from complex multi-steps, fluorescence quenching, and low productivity.
In our previous work27, an emulsion-solvent evaporation method for encapsulating quantum dots inside polymer nanobeads was reported. This preparation technique is simple, maintains the fluorescent efficiency of QDs, ensures high encapsulation efficiency, and allows for easy scalable production. Several research groups have successfully developed LFIA strips using QDNBs prepared through this method for applications, including food toxin detection28,29,30, infectious disease biomarker detection31,32, and environmental monitoring33.
This protocol presents specific preparation steps for quantum dot nanobeads (QDNB), QDNB and antibody conjugation, preparation of QDNB-based LFIA, and measurement of C-reactive protein (CRP) in human plasma samples.

Autor destacado: Nanoperlas de puntos cuánticos de alta calidad para inmunoensayos fluorescentes sensibles de flujo lateral

Inmunoensayo fluorescente de flujo lateral basado en nanoperlas de puntos cuánticos

Our research interests currently focus on constructing high-quality multifunctional nanomaterials and their application in the development of ultrasensitive point-of-care diagnostics. Lateral flow immunoassay strips serve as critical rapid detection tools at the point-of-care, particularly in disease screening during epidemics to enhance the detection sensitivity to lateral flow immunoassay. Various new nanoparticle has emerged, including colored latex, upcoercion fluorescent nanoparticles, timed-result fluorescent microspheres, and quantum dots.We presented a one-step emulsion evaporation method for preparing quantum dot nanobeads and other applications in sensitivity, for instance, lateral fluoro-immunoassays. Common to other methods of preparing quantum dot nanobeads, this protocol offers the advantage of simplicities of operation and high productivity. Additionally, the polymer composite nanobeads are biocompatible, unlike silica nanobeads, which generally need additional surface modification with polymers.Sensitive fluorescent lateral flow immunoassay strips have been developed using prepared quantum dot nanobeads. These strips can be used to qualitatively and quantitatively detect disease biomarkers at point-of-care. This new assay could help medical professionals diagnose diseases quickly and accurately.

Preparación de conjugados de anticuerpos QDNB mediante el método de evaporación de emulsión de un solo paso

qdnb-antibody-conjugates-preparation-using-one-step-emulsion

Research

JoVE Journal

Biochemistry

QDNB-Antibody Conjugates Preparation Using One-Step Emulsion Evaporation Method

60 vistas. Para comenzar, agregue 100 microlitros de nanoperlas QD preparadas a 200 microlitros de tampón de fosfato. A continuación, añade seis microlitros de EDC. Después de eso, incube la mezcla durante 30 minutos a temperatura ambiente en una batidora rotativa.Centrifugar la mezcla a 13.523 g durante 10 minutos a temperatura ambiente y desechar el sobrenadante. A continuación, agregue 100 microlitros de tampón de fosfato al precipitado. Cubra el tubo co...

Video: Preparación de conjugados de anticuerpos QDNB mediante el método de evaporación de emulsión de un solo paso

Fluorescent Lateral Flow Immunoassay Based on Quantum Dots Nanobeads

Quantum dots, also known as semiconductor nanocrystals, are novel fluorescent labels for biological imaging and sensing. However, quantum dot-antibody conjugates with small dimensions (~10 nm), prepared through laborious purification procedures, exhibit limited sensitivity in detecting certain trace disease markers using lateral flow immunoassay strips. Herein, we present a method for the preparation of quantum dot nanobeads (QDNB) using a one-step emulsion evaporation method. Using the as-prepared QDNB, a fluorescent lateral flow immunoassay was fabricated to detect disease biomarkers using C-reactive protein (CRP) as an example. Unlike single quantum dot nanoparticles, quantum dot nanobead-antibody conjugates are more sensitive as immunoassay labels due to signal amplification by encapsulating hundreds of quantum dots in one polymer composite nanobead. Moreover, the larger size of QDNBs facilitates easier centrifugation separation when conjugating QDNBs with antibodies. The fluorescent lateral flow immunoassay based on QDNBs was fabricated, and the CRP concentration in the sample was measured in 15 min. The test results can be qualitatively assessed under UV light illumination and quantitatively measured using a fluorescent reader within 15 min.

Here, we describe a protocol for the preparation of quantum dot nanobeads (QDNB) and the detection of disease biomarkers using QDNB-based lateral flow immunoassay strips. The test results can be qualitatively assessed under UV light illumination and quantitatively measured using a fluorescent strip reader within 15 min.

Quantum dots, also known as semiconductor nanocrystals, are novel fluorescent labels for biological imaging and sensing. However, quantum dot-antibody ...

Investigación

Bioquímica

Preparation of Quantum Dots (QDs) Nanobeads for QDNB-Based Lateral Flow Immunoassay

To begin, mix 0.4 milliliters of polystyrene co-maleic anhydride solution and 0.1 milliliters of QD solution to prepare 1 milliliter of the oil phase. Then fill the rest with chloroform until the volume reaches 1 milliliter. Next, prepare the aqueous phase using sodium dodecyl sulfate solution.Combine 1 milliliter of the oil phase and 5 milliliters of the aqueous phase in a vial. Place the vial on a magnetic stir and turn it on. Once the oil and aqueous phases are thoroughly mixed, immediately transfer the vial to the programmed ultrasonication device and turn on the power.Then place the vial back on the magnetic stir at room temperature and stir continuously overnight. After solvent evaporation, add 0.1 milliliters of 0.1 millimolar sodium hydroxide to the nanobead suspension, and allow it to react for one hour.

Preparación de nanoperlas de puntos cuánticos (QDs) para inmunoensayo de flujo lateral basado en QDNB

To begin, add 100 microliters of prepared QD nanobeads to 200 microliters of phosphate buffer. Then add six microliters of EDC. After that, incubate the mixture for 30 minutes at room temperature on a rotary mixer.Centrifuge the mixture at 13, 523 g for 10 minutes at room temperature and discard the supernatant. Next, add 100 microliters of phosphate buffer to the precipitate. Cover the tube with its lid and immerse it in the operational ultrasonic water bath until the precipitate is fully dispersed.Disperse 100 micrograms of antibody in 200 microliters of phosphate buffer, and add the activated QD nanobead suspension to the antibody solution. Incubate the mixture at room temperature for 30 minutes with continuous rotation. Then remove excess antibodies by centrifugation at 6, 010 g for five minutes at room temperature, and carefully discard the supernatant.To block the nanobeads, add 200 microliters of 1%casein solution to the residue. Cover the tube with its lid and immerse it into the operational ultrasonic water bath until the residue is fully dispersed. Incubate the mixture at room temperature for two hours with continuous rotation.Add 100 microliters of preservative solution to the mixture and store at four degrees Celsius for subsequent use.

Lateral Flow Immunoassay Strips Preparation, Assay Operation and its Quantitative Evaluation

To begin, prepare the test line, and control line coating solution. Dilute the C-reactive protein capture antibody, and Goat anti-rabbit immunoglobulin G with phosphate buffer. Next, place the polyvinyl chloride board properly and remove the protective paper located 25 millimeters from the edge of the board.Align and adhere the nitrocellulose membrane along the lower edge of the remaining protective paper to the polyvinyl chloride board. Dispense the test line, and control line coating solutions onto the nitrocellulose membrane, ensuring it is placed 20 millimeters apart from the upper edge, forming a test line. For drying, place the nitrocellulose membrane in conditions with a humidity of less than 30%and a temperature range of 18 to 26 degrees Celsius.To prepare the conjugate pad, submerge the conjugate pad into the conjugate pad treatment solution, then place the soaked conjugate pad in a drying oven for overnight drying treatment. Dilute the prepared QD nano bead antibody conjugate solution with the preservative solution, and dispense it onto the conjugate pad. For sample pad preparation.Submerge the sample pad into the sample pad treatment solution. Then place the soaked sample pad into a drying oven set at 45 degrees Celsius, and dry for 24 hours. Successively, place the absorbent paper, conjugate pad and sample pad on the polyvinyl chloride board with the nitrocellulose membrane.Pipette 10 microliters of plasma sample or calibrator solution into one milliliter of A PBS buffer containing 0.1%tween 20. Then transfer 100 microliters of the prepared diluted sample onto the sample pad of the test strip. After a 15 minute run, observe the fluorescent signals of the test line and control line under ultraviolet light exposure to obtain qualitative results.Insert the strip card into a fluorescent lateral flow assay reader to obtain the fluorescence intensities for quantitative analysis.