El trabajo en laboratorio, el Dr. Bermúdez ha sido financiado por Conacyt (Grant # 82622). Damos las gracias a Gabriela Gutiérrez Sosa, Eliuth Reyes-Martínez y Ximena Rodríguez-Torres para grabar el vídeo del procedimiento electroleution.

<ol><li> Para la selección de fragmentos de ADN de interés para ser purificados, estos deben ser resueltos en geles de agarosa o acrilamida gel teñido con bromuro de etidio por electroforesis en buffer TBE 0.5X (Tris borato, EDTA) a 120 voltios durante 1 hora. Para ello, unos 700 ng de plásmido pProEx-GdMre11S (6000-pb) previamente digerido con NdeI y HindIII fue utilizada para liberar un fragmento de 900 pb (560 ng de plásmido y 84 ng del fragmento). </li><li> El tanque de electroeluter (Figura 1) debe ser llenado con TBE 0.5X distribuye por igual en cada lado de la meseta a mediados cuidando de no derramar en la meseta intermedia. </li><li> La banda seleccionada (o bandas) es cortada del gel, y se coloca en la cámara de muestras lo más cerca posible al canal V (una rebanada por pozo). Funcionamiento de amortiguación se debe agregar a cada grupo; lo suficiente para cubrir la porción de gel. </li><li> Cada canal V utilizados deben ser eliminados con una pipeta Pasteur para eliminar cualquier burbuja de aire atrapada. </li><li> De 100 ul de 10 M NH 4 acetato (para facilitar la visualización de una pequeña cantidad de azul de bromofenol se añade, justo lo suficiente para que el color) se añadió con suavidad dentro del canal V. </li><li> La tapa deberá estar cerrada con cuidado para evitar la resuspensión del colchón de sal. </li><li> Electroelución se inicia a 100 voltios durante 25 minutos. </li><li> Cuando se haya completado electrolution, 400 ul se retiran de V-canal, y se coloca en un tubo de microcentrífuga que se precipitó con 2 volúmenes de etanol frío y el glucógeno (recomendado para mejorar la recuperación de ADN) a 4 ° C durante 1 hora o toda la noche. </li><li> Centrifugar durante 20 minutos, retirar el sobrenadante y lavar con etanol al 70%. </li><li> Tubo seco y cuantificar el ADN a OD 260 nm. </li><li> La recuperación obtenida fue del 75% (63 ng recuperado 84 ng cuando fueron colocados en la V-canal). </li></ol><img src="/files/ftp_upload/2136/2136fig1.jpg" alt="Figura 1" /> Figura 1. Diagrama Electroeluter. Anod un cátodo se indican en cada lado del tanque, el ADN contenido en gel en rodajas (ilustrado como un cuadrado negro) migrarán hacia el cátodo, debido a su carga negativa. Entonces será atrapado en el cojín de la sal (representado como un triángulo negro invertido), ubicado en la V-canal.

<ol>
	<li>Sambrook, J., Fritsch, E. F., Maniatis, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Molecular Cloning: A Laboratory Manual. , (1989).</li></ol>

La duración de la ejecución dependerá en gran medida del tamaño de los fragmentos, por lo general de los fragmentos de hasta 20 kb 50 minutos a 1 hora es suficiente, mientras que para los pequeños fragmentos de luz UV monitoreo cada 10 minutos se requiere para evitar que el fragmento que pasar por el sal colchón y por lo tanto a la cámara de amortiguación anódica disminuye la recuperación. Es importante asegurarse de que cuando se establece el suministro de energía a 100 voltios, hay una mAmp actual por lo menos de 10. La banda de ADN se puede controlar mediante el uso de una lámpara UV-mano y detectar cuando este abandona el corte de gel. La sal de colchón también se puede hacer con 3 M de acetato de sodio. Este procedimiento permite la purificación de ADN o ARN fragmentos de diferentes tamaños con una buena recuperación (80%) para ser radiomarcados, digeridos por las enzimas de restricción, procesados ​​por enzimas modificando, etc

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>NdeI</td>
<td>&nbsp;</td>
<td>New England Biolabs</td>
<td>R0111L</td>
<td>&nbsp;</td>
<tr>
<td>HindIII</td>
<td>&nbsp;</td>
<td>New England Biolabs</td>
<td>R0104L</td>
<td>&nbsp;</td>
<tr>
<td>NH4 acetate</td>
<td>&nbsp;</td>
<td>JTBaker</td>
<td>0596</td>
<td>&nbsp;</td>
<tr>
<td>agarose</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>15510-027</td>
<td>&nbsp;</td>
<tr>
<td>Biophotometer</td>
<td>&nbsp;</td>
<td>Eppendorf</td>
<td>6131 000 020</td>
<td>&nbsp;</td>
<tr>
<td>Electroeluter</td>
<td>&nbsp;</td>
<td>IBI</td>
<td>UEA CAT 46000</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

electroeluting dna fragments

Purificada fragmentos de ADN se utilizan para diferentes propósitos en la biología molecular y pueden ser preparados por varios procedimientos. La mayoría de ellos requieren una electroforesis previa de los fragmentos de ADN a fin de separar la banda de interés. Entonces, esta banda se extirpa a cabo a partir de un gel de agarosa o de acrilamida y se purifica mediante el uso de cualquiera: unión y la elución de las partículas de vidrio o sílice, las membranas de DEAE-celulosa, &quot;aplastar y absorber el método&quot;, electroelución o muy a menudo costosos kits de purificación de comerciales. Por lo tanto, la selección de un método dependerá principalmente de lo que está disponible en el laboratorio. El procedimiento electroelución permite purificar el ADN muy limpio para ser utilizado en un gran número de aplicaciones (secuenciación, radiomarcado, la restricción enzimática, modificación enzimática, etc clonación). Este procedimiento consiste en la colocación de la banda de ADN que contienen rodajas de agarosa o de acrilamida en los pozos de la muestra de la electroeluter, vigente en ese momento la aplicación hará que el fragmento de ADN para salir de la agarosa y por lo tanto quedar atrapado en una sal de colchón para ser recuperada más tarde por la precipitación con etanol.

Watch this Scientific Journal Video about Electroeluting DNA Fragments at JoVE.com

Electroeluting DNA Fragments

Este procedimiento permite la purificación de fragmentos de ADN con alto rendimiento.

Electroeluting fragmentos de ADN

Purified DNA fragments are used for different purposes in Molecular Biology and they can be prepared by several procedures. Most of them require a ...

Research

JoVE Journal

Biology

27.6K vistas.  Research and Advanced Studies Center of National Polytechnic Institute. Este procedimiento permite la purificación de fragmentos de ADN con alto rendimiento.

Video: Electroeluting DNA Fragments

Methylated DNA Immunoprecipitation

The identification of DNA methylation patterns is a common procedure in the study of epigenetics, as methylation is known to have significant effects on gene expression, and is involved with normal development as well as disease 1-4. Thus, the ability to discriminate between methylated DNA and non-methylated DNA is essential for generating methylation profiles for such studies. Methylated DNA immunoprecipitation (MeDIP) is an efficient technique for the extraction of methylated DNA from a sample of interest 5-7. A sample of as little as 200 ng of DNA is sufficient for the antibody, or immunoprecipitation (IP), reaction. DNA is sonicated into fragments ranging in size from 300-1000 bp, and is divided into immunoprecipitated (IP) and input (IN) portions. IP DNA is subsequently heat denatured and then incubated with anti-5'mC, allowing the monoclonal antibody to bind methylated DNA. After this, magnetic beads containing a secondary antibody with affinity for the primary antibody are added, and incubated. These bead-linked antibodies will bind the monoclonal antibody used in the first step. DNA bound to the antibody complex (methylated DNA) is separated from the rest of the DNA by using a magnet to pull the complexes out of solution. Several washes using IP buffer are then performed to remove the unbound, non-methylated DNA. The methylated DNA/antibody complexes are then digested with Proteinase K to digest the antibodies leaving only the methylated DNA intact. The enriched DNA is purified by phenol:chloroform extraction to remove the protein matter and then precipitated and resuspended in water for later use. PCR techniques can be used to validate the efficiency of the MeDIP procedure by analyzing the amplification products of IP and IN DNA for regions known to lack and known to contain methylated sequences. The purified methylated DNA can then be used for locus-specific (PCR) or genome-wide (microarray and sequencing) methylation studies, and is particularly useful when applied in conjunction with other research tools such as gene expression profiling and array comparative genome hybridization (CGH) 8. Further investigation into DNA methylation will lead to the discovery of new epigenetic targets, which in turn, may be useful in developing new therapeutic or prognostic research tools for diseases such as cancer that are characterized by aberrantly methylated DNA 2, 4, 9-11.

This video demonstrates the protocol for methylated DNA immunoprecipitation (MeDIP). MeDIP is a two day procedure that selectively extracts methylated DNA fragments from a genomic DNA sample using antibodies with specificity for 5 -methylcytosine (anti-5 mC).

Inmunoprecipitación de ADN metilado

The identification of DNA methylation patterns is a common procedure in the study of epigenetics, as methylation is known to have significant effects on ...

Investigación

Biología

Direct Observation of Enzymes Replicating DNA Using a Single-molecule DNA Stretching Assay

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system. Linearized &lambda; DNA is modified to have a biotin on the end of one strand, and a digoxigenin moiety on the other end of the same strand. The biotinylated end is attached to a functionalized glass coverslip and the digoxigeninated end to a small bead. The assembly of these DNA-bead tethers on the surface of a flow cell allows a laminar flow to be applied to exert a drag force on the bead. As a result, the DNA is stretched close to and parallel to the surface of the coverslip at a force that is determined by the flow rate (Figure 1). The length of the DNA is measured by monitoring the position of the bead. Length differences between single- and double-stranded DNA are utilized to obtain real-time information on the activity of the replication proteins at the fork. Measuring the position of the bead allows precise determination of the rates and processivities of DNA unwinding and polymerization (Figure 2).

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system.

La observación directa de ADN Enzimas Replicar El uso de un ADN de una sola molécula de estiramiento de ensayo

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system. ...

DNA Stable-Isotope Probing (DNA-SIP)

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and nutrients into cellular biomass. As such, this cultivation-independent technique has been an important methodology for assigning metabolic function to the diverse communities inhabiting a wide range of terrestrial and aquatic environments. Following the incubation of an environmental sample with stable-isotope labelled compounds, extracted nucleic acid is subjected to density gradient ultracentrifugation and subsequent gradient fractionation to separate nucleic acids of differing densities. Purification of DNA from cesium chloride retrieves labelled and unlabelled DNA for subsequent molecular characterization (e.g. fingerprinting, microarrays, clone libraries, metagenomics). This JoVE video protocol provides visual step-by-step explanations of the protocol for density gradient ultracentrifugation, gradient fractionation and recovery of labelled DNA. The protocol also includes sample SIP data and highlights important tips and cautions that must be considered to ensure a successful DNA-SIP analysis.

DNA Stable-Isotope Probing DNA-SIP

DNA stable-isotope probing is a cultivation-independent method to identify and characterize active communities of microorganisms that are capable of utilizing specific substrates. Assimilation of substrate enriched in heavy isotope leads to incorporation of labelled atoms into microbial biomass. Density gradient ultracentrifugation retrieves labelled DNA for downstream molecular analyses.

ADN de isótopos estables de palpado (ADN-SIP)

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and ...

Agarose Gel Electrophoresis for the Separation of DNA Fragments

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb1. Agarose is isolated from the seaweed genera Gelidium and Gracilaria, and consists of repeated agarobiose (L- and D-galactose) subunits2. During gelation, agarose polymers associate non-covalently and form a network of bundles whose pore sizes determine a gel&#39;s molecular sieving properties. The use of agarose gel electrophoresis revolutionized the separation of DNA. Prior to the adoption of agarose gels, DNA was primarily separated using sucrose density gradient centrifugation, which only provided an approximation of size. To separate DNA using agarose gel electrophoresis, the DNA is loaded into pre-cast wells in the gel and a current applied. The phosphate backbone of the DNA (and RNA) molecule is negatively charged, therefore when placed in an electric field, DNA fragments will migrate to the positively charged anode. Because DNA has a uniform mass/charge ratio, DNA molecules are separated by size within an agarose gel in a pattern such that the distance traveled is inversely proportional to the log of its molecular weight3. The leading model for DNA movement through an agarose gel is &#34;biased reptation&#34;, whereby the leading edge moves forward and pulls the rest of the molecule along4. The rate of migration of a DNA molecule through a gel is determined by the following: 1) size of DNA molecule; 2) agarose concentration; 3) DNA conformation5; 4) voltage applied, 5) presence of ethidium bromide, 6) type of agarose and 7) electrophoresis buffer. After separation, the DNA molecules can be visualized under uv light after staining with an appropriate dye. By following this protocol, students should be able to: 
 
1. Understand the mechanism by which DNA fragments are separated within a gel matrix 
2. Understand how conformation of the DNA molecule will determine its mobility through a gel matrix 
3. Identify an agarose solution of appropriate concentration for their needs 
4. Prepare an agarose gel for electrophoresis of DNA samples 
5. Set up the gel electrophoresis apparatus and power supply 
6. Select an appropriate voltage for the separation of DNA fragments 
7. Understand the mechanism by which ethidium bromide allows for the visualization of DNA bands 
8. Determine the sizes of separated DNA fragments 
&#160;

A basic protocol for the separation of DNA fragments using agarose gel electrophoresis is described.

Electroforesis en gel de agarosa para la separación de los fragmentos de ADN

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb1. Agarose is isolated from ...

Iterative Optimization of DNA Duplexes for Crystallization of SeqA-DNA Complexes

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters within the origin of replication1. Beyond the origin, SeqA is found at the replication forks, where it organizes newly replicated DNA into higher ordered structures2. SeqA associates only weakly with single GATC sequences, but it forms high affinity complexes with DNA duplexes containing multiple GATC sites. The minimal functional and structural unit of SeqA is a dimer, thereby explaining the requirement of at least two GATC sequences to form a high-affinity complex with hemimethylated DNA3. Additionally, the SeqA architecture, with the oligomerization and DNA-binding domains separated by a flexible linker, allows binding to GATC repeats separated by up to three helical turns. Therefore, understanding the function of SeqA at a molecular level requires the structural analysis of SeqA bound to multiple GATC sequences. In protein-DNA crystallization, DNA can have none to an exceptional effect on the packing interactions depending on the relative sizes and architecture of the protein and the DNA. If the protein is larger than the DNA or footprints most of the DNA, the crystal packing is primarily mediated by protein-protein interactions. Conversely, when the protein is the same size or smaller than the DNA or it only covers a fraction of the DNA, DNA-DNA and DNA-protein interactions dominate crystal packing. Therefore, crystallization of protein-DNA complexes requires the systematic screening of DNA length4 and DNA ends (blunt or overhang)5-7. In this report, we describe how to design, optimize, purify and crystallize hemimethylated DNA duplexes containing tandem GATC repeats in complex with a dimeric variant of SeqA (SeqA&Delta;(41-59)-A25R) to obtain crystals suitable for structure determination.

Crystal structure of protein&#x2013;DNA complexes can provide insight into protein function, mechanism, as well as, the nature of the specific interaction. Here, we report how to optimize the length, sequence and ends of duplex DNA for co-crystallization with Escherichia coli SeqA, a negative regulator of replication initiation.

Iterativo de optimización de dúplex de ADN para la cristalización de SEQA-ADN complejos

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters ...

Real-time Imaging of Single Engineered RNA Transcripts in Living Cells Using Ratiometric Bimolecular Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the development of diverse techniques to visualize individual RNA transcripts in single living cells. One promising technique that has recently been described utilizes an oligonucleotide-based optical probe, ratiometric bimolecular beacon (RBMB), to detect RNA transcripts that were engineered to contain at least four tandem repeats of the RBMB target sequence in the 3&#8217;-untranslated region. RBMBs are specifically designed to emit a bright fluorescent signal upon hybridization to complementary RNA, but otherwise remain quenched. The use of a synthetic probe in this approach allows photostable, red-shifted, and highly emissive organic dyes to be used for imaging. Binding of multiple RBMBs to the engineered RNA transcripts results in discrete fluorescence spots when viewed under a wide-field fluorescent microscope. Consequently, the movement of individual RNA transcripts can be readily visualized in real-time by taking a time series of fluorescent images. Here we describe the preparation and purification of RBMBs, delivery into cells by microporation and live-cell imaging of single RNA transcripts.

Ratiometric bimolecular beacons (RBMBs) can be used to image single engineered RNA transcripts in living cells. Here, we describe the preparation and purification of RBMBs, delivery of RBMBs into cells by microporation and fluorescent imaging of single RNA transcripts in real-time.

Imágenes en tiempo real de Soltero Engineered ARN transcritos en células vivas utilizando Ratiometric bimoleculares Balizas

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the ...

Demonstration of Proteolytic Activation of the Epithelial Sodium Channel (ENaC) by Combining Current Measurements with Detection of Cleavage Fragments

The described methods can be used to investigate the effect of proteases on ion channels, receptors, and other plasma membrane proteins heterologously expressed in Xenopus laevis oocytes. In combination with site-directed mutagenesis, this approach provides a powerful tool to identify functionally relevant cleavage sites. Proteolytic activation is a characteristic feature of the amiloride-sensitive epithelial sodium channel (ENaC). The final activating step involves cleavage of the channel&#8217;s &#947;-subunit in a critical region potentially targeted by several proteases including chymotrypsin and plasmin. To determine the stimulatory effect of these serine proteases on ENaC, the amiloride-sensitive whole-cell current (&#916;Iami) was measured twice in the same oocyte before and after exposure to the protease using the two-electrode voltage-clamp technique. In parallel to the electrophysiological experiments, a biotinylation approach was used to monitor the appearance of &#947;ENaC cleavage fragments at the cell surface. Using the methods described, it was demonstrated that the time course of proteolytic activation of ENaC-mediated whole-cell currents correlates with the appearance of a &#947;ENaC cleavage product at the cell surface. These results suggest a causal link between channel cleavage and channel activation. Moreover, they confirm the concept that a cleavage event in &#947;ENaC is required as a final step in proteolytic channel activation. The methods described here may well be applicable to address similar questions for other types of ion channels or membrane proteins.

Demonstration of Proteolytic Activation of the Epithelial Sodium Channel ENaC by Combining Current Measurements with Detection of Cleavage Fragments

Proteolytic activation of the epithelial sodium channel (ENaC) heterologously expressed in Xenopus laevis oocytes can be demonstrated by combining current measurements with a biotinylation approach to investigate the appearance of ion channel cleavage products at the cell surface. Functionally important cleavage sites can be identified by using site-directed mutagenesis.

Demostración de la activación proteolítica del canal de sodio epitelial (ENaC) mediante la combinación de mediciones de corriente con detección de fragmentos de escisión

The described methods can be used to investigate the effect of proteases on ion channels, receptors, and other plasma membrane proteins heterologously ...

Reduced-gravity Environment Hardware Demonstrations of a Prototype Miniaturized Flow Cytometer and Companion Microfluidic Mixing Technology

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If humans are to travel beyond low Earth orbit, a transition towards space-ready, point-of-care (POC) testing is required. Such testing needs to be comprehensive, easy to perform in a reduced-gravity environment, and unaffected by the stresses of launch and spaceflight. Countless POC devices have been developed to mimic laboratory scale counterparts, but most have narrow applications and few have demonstrable use in an in-flight, reduced-gravity environment. In fact, demonstrations of biomedical diagnostics in reduced gravity are limited altogether, making component choice and certain logistical challenges difficult to approach when seeking to test new technology. To help fill the void, we are presenting a modular method for the construction and operation of a prototype blood diagnostic device and its associated parabolic flight test rig that meet the standards for flight-testing onboard a parabolic flight, reduced-gravity aircraft. The method first focuses on rig assembly for in-flight, reduced-gravity testing of a flow cytometer and a companion microfluidic mixing chip. Components are adaptable to other designs and some custom components, such as a microvolume sample loader and the micromixer may be of particular interest. The method then shifts focus to flight preparation, by offering guidelines and suggestions to prepare for a successful flight test with regard to user training, development of a standard operating procedure (SOP), and other issues. Finally, in-flight experimental procedures specific to our demonstrations are described.

Spaceflight blood diagnostics need innovation. Few demonstrations have been published illustrating in-flight, reduced-gravity health diagnostic technology. Here we present a method for construction and operation of a parabolic flight test rig for a prototype point-of-care flow-cytometry design, with components and preparation strategies adaptable to other setups.

Reducción de gravedad Demostraciones entorno de hardware de un prototipo miniaturizado citómetro de flujo y Compañero Microfluidos Tecnología de mezcla

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If ...

DamID-seq: Genome-wide Mapping of Protein-DNA Interactions by High Throughput Sequencing of Adenine-methylated DNA Fragments

The DNA adenine methyltransferase identification (DamID) assay is a powerful method to detect protein-DNA interactions both locally and genome-wide. It is an alternative approach to chromatin immunoprecipitation (ChIP). An expressed fusion protein consisting of the protein of interest and the E. coli DNA adenine methyltransferase can methylate the adenine base in GATC motifs near the sites of protein-DNA interactions. Adenine-methylated DNA fragments can then be specifically amplified and detected. The original DamID assay detects the genomic locations of methylated DNA fragments by hybridization to DNA microarrays, which is limited by the availability of microarrays and the density of predetermined probes. In this paper, we report the detailed protocol of integrating high throughput DNA sequencing into DamID (DamID-seq). The large number of short reads generated from DamID-seq enables detecting and localizing protein-DNA interactions genome-wide with high precision and sensitivity. We have used the DamID-seq assay to study genome-nuclear lamina (NL) interactions in mammalian cells, and have noticed that DamID-seq provides a high resolution and a wide dynamic range in detecting genome-NL interactions. The DamID-seq approach enables probing NL associations within gene structures and allows comparing genome-NL interaction maps with other functional genomic data, such as ChIP-seq and RNA-seq.

We describe herein an assay by coupling DNA adenine methyltransferase identification (DamID) to high throughput sequencing (DamID-seq). This improved method provides a higher resolution and a wider dynamic range, and allows analyzing DamID-seq data in conjunction with other high throughput sequencing data such as ChIP-seq, RNA-seq, etc.

-DamID siguientes: Genoma de toda la cartografía de la proteína-ADN Interacciones de alto rendimiento de secuenciación de fragmentos de ADN adenina-metilado

The DNA adenine methyltransferase identification (DamID) assay is a powerful method to detect protein-DNA interactions both locally and genome-wide. It is ...

Amplification, Next-generation Sequencing, and Genomic DNA Mapping of Retroviral Integration Sites

Retroviruses exhibit signature integration preferences on both the local and global scales. Here, we present a detailed protocol for (1) generation of diverse libraries of retroviral integration sites using ligation-mediated PCR (LM-PCR) amplification and next-generation sequencing (NGS), (2) mapping the genomic location of each virus-host junction using BEDTools, and (3) analyzing the data for statistical relevance. Genomic DNA extracted from infected cells is fragmented by digestion with restriction enzymes or by sonication. After suitable DNA end-repair, double-stranded linkers are ligated onto the DNA ends, and semi-nested PCR is conducted using primers complementary to both the long terminal repeat (LTR) end of the virus and the ligated linker DNA. The PCR primers carry sequences required for DNA clustering during NGS, negating the requirement for separate adapter ligation. Quality control (QC) is conducted to assess DNA fragment size distribution and adapter DNA incorporation prior to NGS. Sequence output files are filtered for LTR-containing reads, and the sequences defining the LTR and the linker are cropped away. Trimmed host cell sequences are mapped to a reference genome using BLAT and are filtered for minimally 97% identity to a unique point in the reference genome. Unique integration sites are scrutinized for adjacent nucleotide (nt) sequence and distribution relative to various genomic features. Using this protocol, integration site libraries of high complexity can be constructed from genomic DNA in three days. The entire protocol that encompasses exogenous viral infection of susceptible tissue culture cells to integration site analysis can therefore be conducted in approximately one to two weeks. Recent applications of this technology pertain to longitudinal analysis of integration sites from HIV-infected patients.

We describe a protocol for amplifying retroviral integration sites from the genomic DNA of infected cells, sequencing the amplified virus-host junctions, and then mapping these sequences to a reference genome. We also describe techniques to quantify the distribution of integration sites relative to various genomic annotations using BEDTools.

Amplificación, secuenciación de próxima generación, y Genómica Mapeo de ADN retrovirales sitios de integración

Retroviruses exhibit signature integration preferences on both the local and global scales. Here, we present a detailed protocol for (1) generation of ...