Trabalho em laboratório Dr. Bermudez foi financiado pela Conacyt (Grant # 82622). Agradecemos Gabriela Gutierrez-Sosa, Eliuth Reyes-Martinez e Ximena Rodriguez-Torres para gravação de vídeo o procedimento electroleution.

<ol><li> A fim de selecionar fragmentos de DNA de interesse para ser purificado, estes devem ser resolvidos em gel de acrilamida ou agarose gel corado com brometo de etídio por eletroforese usando tampão TBE 0.5X (Tris Borato, EDTA) a 120 volts por 1 hora. Para isso, ~ 700 ng de plasmídeo pProEx-GdMre11S (6000 pb) previamente digerido com HindIII NdeI e foi usado para liberar um fragmento de 900 bp (560 ng de plasmídeo e 84 ng de fragmento). </li><li> O tanque electroeluter (Figura 1) deve ser preenchido com TBE 0.5X igualmente distribuídos em cada lado do planalto médio, tendo o cuidado de não derramar-lo para o planalto médio. </li><li> A banda selecionada (ou bandas) é cortada do gel, e colocados em câmara de amostra o mais próximo possível ao canal V (uma fatia por poço). Tampão de corrida deve ser adicionado a cada câmara, apenas o suficiente para cobrir a fatia de gel. </li><li> Cada canal V usada deve ser lavada com uma pipeta Pasteur para eliminar qualquer bolha de ar aprisionado. </li><li> Em seguida, 100 ul de 10 M NH 4 acetato (para facilitar a visualização de uma pequena quantidade de azul de bromofenol é adicionado, apenas o suficiente para colorir) são delicadamente adicionada dentro do canal V. </li><li> A tampa deve ser fechado com cuidado para evitar qualquer ressuspensão da almofada de sal. </li><li> Eletroeluição é iniciada a 100 volts por 25 minutos. </li><li> Quando estiver concluído electrolution, 400 ul são removidos do V-channel, e colocado em um tubo de microcentrífuga para ser precipitado com 2 volumes de etanol frio e glicogênio (recomendado para melhorar a recuperação do DNA) a 4 ° C por 1 hora ou durante a noite. </li><li> Centrifugar por 20 minutos, remova o sobrenadante e lavar com etanol 70%. </li><li> Tubo seco e quantificar DNA na OD 260 nm. </li><li> A recuperação obtida foi de 75% (63 ng recuperado quando 84 ng foram colocados no V-channel). </li></ol><img src="/files/ftp_upload/2136/2136fig1.jpg" alt="Figura 1" /> Figura 1. Diagrama Electroeluter. Anod um cátodo são indicados em cada lado do tanque de DNA, contido no gel cortado (ilustrado como um quadrado preto) vai migrar para o catodo, devido à sua carga negativa. Então ele vai ser preso na almofada de sal (representado como um triângulo invertido preto) localizado no V-canal.

<ol>
	<li>Sambrook, J., Fritsch, E. F., Maniatis, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Molecular Cloning: A Laboratory Manual. , (1989).</li></ol>

Não há conflitos de interesse declarados.

A duração da corrida vai depender muito do tamanho dos fragmentos, normalmente por fragmentos até 20 kb 50 minutos a 1 hora é suficiente, enquanto que para pequenos fragmentos de luz UV monitoramento a cada 10 minutos é necessário para evitar que o fragmento de passar pelo almofada de sal e, conseqüentemente, para a câmara de tampão anódica diminuindo recuperação. É importante certificar-se que quando você definir a fonte de alimentação de 100 volts, há uma mAmp atual, pelo menos, de 10. A banda DNA pode ser monitorado usando uma lâmpada UV-mão e detectar quando este abandona a fatia de gel. O sal almofada também pode ser feita com 3 M acetato de sódio. Este procedimento permite a purificação do DNA ou RNA fragmentos de tamanhos diferentes, com boa recuperação (~ 80%) a ser marcado radioactivamente, digeridos por enzimas de restrição, processado por enzimas modificando, etc

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>NdeI</td>
<td>&nbsp;</td>
<td>New England Biolabs</td>
<td>R0111L</td>
<td>&nbsp;</td>
<tr>
<td>HindIII</td>
<td>&nbsp;</td>
<td>New England Biolabs</td>
<td>R0104L</td>
<td>&nbsp;</td>
<tr>
<td>NH4 acetate</td>
<td>&nbsp;</td>
<td>JTBaker</td>
<td>0596</td>
<td>&nbsp;</td>
<tr>
<td>agarose</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>15510-027</td>
<td>&nbsp;</td>
<tr>
<td>Biophotometer</td>
<td>&nbsp;</td>
<td>Eppendorf</td>
<td>6131 000 020</td>
<td>&nbsp;</td>
<tr>
<td>Electroeluter</td>
<td>&nbsp;</td>
<td>IBI</td>
<td>UEA CAT 46000</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

electroeluting dna fragments

Fragmentos de DNA purificado são utilizados para fins diferentes em Biologia Molecular e eles podem ser preparados por vários procedimentos. A maioria deles requer uma eletroforese anteriores dos fragmentos de DNA a fim de separar a banda de interesse. Então, esta banda é retirado a partir de um gel de agarose ou acrilamida e purificado usando: ligação e eluição de vidro ou sílica partículas, DEAE-celulose membranas, &quot;esmagar e mergulhe método&quot;, eletroeluição ou muito frequentemente caros kits de purificação de comerciais. Assim, a seleção de um método vai depender principalmente do que está disponível no laboratório. O procedimento eletroeluição permite purificar DNA muito limpo para ser usado em um grande número de aplicações (seqüenciamento, marcação radioactiva, restrição enzimática, alteração enzimática, etc clonagem). Este procedimento consiste na colocação de banda DNA contendo fatias de agarose ou acrilamida em poços amostra do electroeluter, então corrente aplicação fará com que o fragmento de DNA para deixar a agarose e, portanto, ser preso em uma almofada de sal a ser recuperado mais tarde, por precipitação de etanol.

Watch this Scientific Journal Video about Electroeluting DNA Fragments at JoVE.com

Electroeluting DNA Fragments

Este procedimento permite a purificação de fragmentos de DNA com alto rendimento.

Electroeluting fragmentos de DNA

Purified DNA fragments are used for different purposes in Molecular Biology and they can be prepared by several procedures. Most of them require a ...

Research

JoVE Journal

Biology

27.6K visualizações.  Research and Advanced Studies Center of National Polytechnic Institute. Este procedimento permite a purificação de fragmentos de DNA com alto rendimento.

Vídeo: Electroeluting DNA Fragments

Methylated DNA Immunoprecipitation

The identification of DNA methylation patterns is a common procedure in the study of epigenetics, as methylation is known to have significant effects on gene expression, and is involved with normal development as well as disease 1-4. Thus, the ability to discriminate between methylated DNA and non-methylated DNA is essential for generating methylation profiles for such studies. Methylated DNA immunoprecipitation (MeDIP) is an efficient technique for the extraction of methylated DNA from a sample of interest 5-7. A sample of as little as 200 ng of DNA is sufficient for the antibody, or immunoprecipitation (IP), reaction. DNA is sonicated into fragments ranging in size from 300-1000 bp, and is divided into immunoprecipitated (IP) and input (IN) portions. IP DNA is subsequently heat denatured and then incubated with anti-5'mC, allowing the monoclonal antibody to bind methylated DNA. After this, magnetic beads containing a secondary antibody with affinity for the primary antibody are added, and incubated. These bead-linked antibodies will bind the monoclonal antibody used in the first step. DNA bound to the antibody complex (methylated DNA) is separated from the rest of the DNA by using a magnet to pull the complexes out of solution. Several washes using IP buffer are then performed to remove the unbound, non-methylated DNA. The methylated DNA/antibody complexes are then digested with Proteinase K to digest the antibodies leaving only the methylated DNA intact. The enriched DNA is purified by phenol:chloroform extraction to remove the protein matter and then precipitated and resuspended in water for later use. PCR techniques can be used to validate the efficiency of the MeDIP procedure by analyzing the amplification products of IP and IN DNA for regions known to lack and known to contain methylated sequences. The purified methylated DNA can then be used for locus-specific (PCR) or genome-wide (microarray and sequencing) methylation studies, and is particularly useful when applied in conjunction with other research tools such as gene expression profiling and array comparative genome hybridization (CGH) 8. Further investigation into DNA methylation will lead to the discovery of new epigenetic targets, which in turn, may be useful in developing new therapeutic or prognostic research tools for diseases such as cancer that are characterized by aberrantly methylated DNA 2, 4, 9-11.

This video demonstrates the protocol for methylated DNA immunoprecipitation (MeDIP). MeDIP is a two day procedure that selectively extracts methylated DNA fragments from a genomic DNA sample using antibodies with specificity for 5 -methylcytosine (anti-5 mC).

Imunoprecipitação DNA metilado

The identification of DNA methylation patterns is a common procedure in the study of epigenetics, as methylation is known to have significant effects on ...

Biologia

Direct Observation of Enzymes Replicating DNA Using a Single-molecule DNA Stretching Assay

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system. Linearized &lambda; DNA is modified to have a biotin on the end of one strand, and a digoxigenin moiety on the other end of the same strand. The biotinylated end is attached to a functionalized glass coverslip and the digoxigeninated end to a small bead. The assembly of these DNA-bead tethers on the surface of a flow cell allows a laminar flow to be applied to exert a drag force on the bead. As a result, the DNA is stretched close to and parallel to the surface of the coverslip at a force that is determined by the flow rate (Figure 1). The length of the DNA is measured by monitoring the position of the bead. Length differences between single- and double-stranded DNA are utilized to obtain real-time information on the activity of the replication proteins at the fork. Measuring the position of the bead allows precise determination of the rates and processivities of DNA unwinding and polymerization (Figure 2).

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system.

A observação direta de Enzimas DNA Replicação Usando um DNA molécula única Alongamento Assay

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system. ...

DNA Stable-Isotope Probing (DNA-SIP)

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and nutrients into cellular biomass. As such, this cultivation-independent technique has been an important methodology for assigning metabolic function to the diverse communities inhabiting a wide range of terrestrial and aquatic environments. Following the incubation of an environmental sample with stable-isotope labelled compounds, extracted nucleic acid is subjected to density gradient ultracentrifugation and subsequent gradient fractionation to separate nucleic acids of differing densities. Purification of DNA from cesium chloride retrieves labelled and unlabelled DNA for subsequent molecular characterization (e.g. fingerprinting, microarrays, clone libraries, metagenomics). This JoVE video protocol provides visual step-by-step explanations of the protocol for density gradient ultracentrifugation, gradient fractionation and recovery of labelled DNA. The protocol also includes sample SIP data and highlights important tips and cautions that must be considered to ensure a successful DNA-SIP analysis.

DNA Stable-Isotope Probing DNA-SIP

DNA stable-isotope probing is a cultivation-independent method to identify and characterize active communities of microorganisms that are capable of utilizing specific substrates. Assimilation of substrate enriched in heavy isotope leads to incorporation of labelled atoms into microbial biomass. Density gradient ultracentrifugation retrieves labelled DNA for downstream molecular analyses.

DNA-Stable Isotope Probing (DNA-SIP)

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and ...

Agarose Gel Electrophoresis for the Separation of DNA Fragments

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb1. Agarose is isolated from the seaweed genera Gelidium and Gracilaria, and consists of repeated agarobiose (L- and D-galactose) subunits2. During gelation, agarose polymers associate non-covalently and form a network of bundles whose pore sizes determine a gel&#39;s molecular sieving properties. The use of agarose gel electrophoresis revolutionized the separation of DNA. Prior to the adoption of agarose gels, DNA was primarily separated using sucrose density gradient centrifugation, which only provided an approximation of size. To separate DNA using agarose gel electrophoresis, the DNA is loaded into pre-cast wells in the gel and a current applied. The phosphate backbone of the DNA (and RNA) molecule is negatively charged, therefore when placed in an electric field, DNA fragments will migrate to the positively charged anode. Because DNA has a uniform mass/charge ratio, DNA molecules are separated by size within an agarose gel in a pattern such that the distance traveled is inversely proportional to the log of its molecular weight3. The leading model for DNA movement through an agarose gel is &#34;biased reptation&#34;, whereby the leading edge moves forward and pulls the rest of the molecule along4. The rate of migration of a DNA molecule through a gel is determined by the following: 1) size of DNA molecule; 2) agarose concentration; 3) DNA conformation5; 4) voltage applied, 5) presence of ethidium bromide, 6) type of agarose and 7) electrophoresis buffer. After separation, the DNA molecules can be visualized under uv light after staining with an appropriate dye. By following this protocol, students should be able to: 
 
1. Understand the mechanism by which DNA fragments are separated within a gel matrix 
2. Understand how conformation of the DNA molecule will determine its mobility through a gel matrix 
3. Identify an agarose solution of appropriate concentration for their needs 
4. Prepare an agarose gel for electrophoresis of DNA samples 
5. Set up the gel electrophoresis apparatus and power supply 
6. Select an appropriate voltage for the separation of DNA fragments 
7. Understand the mechanism by which ethidium bromide allows for the visualization of DNA bands 
8. Determine the sizes of separated DNA fragments 
&#160;

A basic protocol for the separation of DNA fragments using agarose gel electrophoresis is described.

Electroforese em gel de agarose para separação dos fragmentos de DNA

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb1. Agarose is isolated from ...

Iterative Optimization of DNA Duplexes for Crystallization of SeqA-DNA Complexes

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters within the origin of replication1. Beyond the origin, SeqA is found at the replication forks, where it organizes newly replicated DNA into higher ordered structures2. SeqA associates only weakly with single GATC sequences, but it forms high affinity complexes with DNA duplexes containing multiple GATC sites. The minimal functional and structural unit of SeqA is a dimer, thereby explaining the requirement of at least two GATC sequences to form a high-affinity complex with hemimethylated DNA3. Additionally, the SeqA architecture, with the oligomerization and DNA-binding domains separated by a flexible linker, allows binding to GATC repeats separated by up to three helical turns. Therefore, understanding the function of SeqA at a molecular level requires the structural analysis of SeqA bound to multiple GATC sequences. In protein-DNA crystallization, DNA can have none to an exceptional effect on the packing interactions depending on the relative sizes and architecture of the protein and the DNA. If the protein is larger than the DNA or footprints most of the DNA, the crystal packing is primarily mediated by protein-protein interactions. Conversely, when the protein is the same size or smaller than the DNA or it only covers a fraction of the DNA, DNA-DNA and DNA-protein interactions dominate crystal packing. Therefore, crystallization of protein-DNA complexes requires the systematic screening of DNA length4 and DNA ends (blunt or overhang)5-7. In this report, we describe how to design, optimize, purify and crystallize hemimethylated DNA duplexes containing tandem GATC repeats in complex with a dimeric variant of SeqA (SeqA&Delta;(41-59)-A25R) to obtain crystals suitable for structure determination.

Crystal structure of protein&#x2013;DNA complexes can provide insight into protein function, mechanism, as well as, the nature of the specific interaction. Here, we report how to optimize the length, sequence and ends of duplex DNA for co-crystallization with Escherichia coli SeqA, a negative regulator of replication initiation.

Iterativo Otimização de Duplexos de DNA para Cristalização de SEQA-Complexos de DNA

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters ...

Real-time Imaging of Single Engineered RNA Transcripts in Living Cells Using Ratiometric Bimolecular Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the development of diverse techniques to visualize individual RNA transcripts in single living cells. One promising technique that has recently been described utilizes an oligonucleotide-based optical probe, ratiometric bimolecular beacon (RBMB), to detect RNA transcripts that were engineered to contain at least four tandem repeats of the RBMB target sequence in the 3&#8217;-untranslated region. RBMBs are specifically designed to emit a bright fluorescent signal upon hybridization to complementary RNA, but otherwise remain quenched. The use of a synthetic probe in this approach allows photostable, red-shifted, and highly emissive organic dyes to be used for imaging. Binding of multiple RBMBs to the engineered RNA transcripts results in discrete fluorescence spots when viewed under a wide-field fluorescent microscope. Consequently, the movement of individual RNA transcripts can be readily visualized in real-time by taking a time series of fluorescent images. Here we describe the preparation and purification of RBMBs, delivery into cells by microporation and live-cell imaging of single RNA transcripts.

Ratiometric bimolecular beacons (RBMBs) can be used to image single engineered RNA transcripts in living cells. Here, we describe the preparation and purification of RBMBs, delivery of RBMBs into cells by microporation and fluorescent imaging of single RNA transcripts in real-time.

Imagens em tempo real de uma única Engineered RNA transcritos em células vivas usando raciométrica Bimolecular Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the ...

Demonstration of Proteolytic Activation of the Epithelial Sodium Channel (ENaC) by Combining Current Measurements with Detection of Cleavage Fragments

The described methods can be used to investigate the effect of proteases on ion channels, receptors, and other plasma membrane proteins heterologously expressed in Xenopus laevis oocytes. In combination with site-directed mutagenesis, this approach provides a powerful tool to identify functionally relevant cleavage sites. Proteolytic activation is a characteristic feature of the amiloride-sensitive epithelial sodium channel (ENaC). The final activating step involves cleavage of the channel&#8217;s &#947;-subunit in a critical region potentially targeted by several proteases including chymotrypsin and plasmin. To determine the stimulatory effect of these serine proteases on ENaC, the amiloride-sensitive whole-cell current (&#916;Iami) was measured twice in the same oocyte before and after exposure to the protease using the two-electrode voltage-clamp technique. In parallel to the electrophysiological experiments, a biotinylation approach was used to monitor the appearance of &#947;ENaC cleavage fragments at the cell surface. Using the methods described, it was demonstrated that the time course of proteolytic activation of ENaC-mediated whole-cell currents correlates with the appearance of a &#947;ENaC cleavage product at the cell surface. These results suggest a causal link between channel cleavage and channel activation. Moreover, they confirm the concept that a cleavage event in &#947;ENaC is required as a final step in proteolytic channel activation. The methods described here may well be applicable to address similar questions for other types of ion channels or membrane proteins.

Demonstration of Proteolytic Activation of the Epithelial Sodium Channel ENaC by Combining Current Measurements with Detection of Cleavage Fragments

Proteolytic activation of the epithelial sodium channel (ENaC) heterologously expressed in Xenopus laevis oocytes can be demonstrated by combining current measurements with a biotinylation approach to investigate the appearance of ion channel cleavage products at the cell surface. Functionally important cleavage sites can be identified by using site-directed mutagenesis.

Demonstração de Proteolytic ativação do canal de sódio epitelial (ENAC) combinando Medidas atuais com Detecção de clivagem Fragments

The described methods can be used to investigate the effect of proteases on ion channels, receptors, and other plasma membrane proteins heterologously ...

Reduced-gravity Environment Hardware Demonstrations of a Prototype Miniaturized Flow Cytometer and Companion Microfluidic Mixing Technology

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If humans are to travel beyond low Earth orbit, a transition towards space-ready, point-of-care (POC) testing is required. Such testing needs to be comprehensive, easy to perform in a reduced-gravity environment, and unaffected by the stresses of launch and spaceflight. Countless POC devices have been developed to mimic laboratory scale counterparts, but most have narrow applications and few have demonstrable use in an in-flight, reduced-gravity environment. In fact, demonstrations of biomedical diagnostics in reduced gravity are limited altogether, making component choice and certain logistical challenges difficult to approach when seeking to test new technology. To help fill the void, we are presenting a modular method for the construction and operation of a prototype blood diagnostic device and its associated parabolic flight test rig that meet the standards for flight-testing onboard a parabolic flight, reduced-gravity aircraft. The method first focuses on rig assembly for in-flight, reduced-gravity testing of a flow cytometer and a companion microfluidic mixing chip. Components are adaptable to other designs and some custom components, such as a microvolume sample loader and the micromixer may be of particular interest. The method then shifts focus to flight preparation, by offering guidelines and suggestions to prepare for a successful flight test with regard to user training, development of a standard operating procedure (SOP), and other issues. Finally, in-flight experimental procedures specific to our demonstrations are described.

Spaceflight blood diagnostics need innovation. Few demonstrations have been published illustrating in-flight, reduced-gravity health diagnostic technology. Here we present a method for construction and operation of a parabolic flight test rig for a prototype point-of-care flow-cytometry design, with components and preparation strategies adaptable to other setups.

De gravidade reduzida Manifestações ambiente de hardware de uma tecnologia de mistura de fluxo Cytometer e Companion microfluídicos Prototype Miniaturized

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If ...

DamID-seq: Genome-wide Mapping of Protein-DNA Interactions by High Throughput Sequencing of Adenine-methylated DNA Fragments

The DNA adenine methyltransferase identification (DamID) assay is a powerful method to detect protein-DNA interactions both locally and genome-wide. It is an alternative approach to chromatin immunoprecipitation (ChIP). An expressed fusion protein consisting of the protein of interest and the E. coli DNA adenine methyltransferase can methylate the adenine base in GATC motifs near the sites of protein-DNA interactions. Adenine-methylated DNA fragments can then be specifically amplified and detected. The original DamID assay detects the genomic locations of methylated DNA fragments by hybridization to DNA microarrays, which is limited by the availability of microarrays and the density of predetermined probes. In this paper, we report the detailed protocol of integrating high throughput DNA sequencing into DamID (DamID-seq). The large number of short reads generated from DamID-seq enables detecting and localizing protein-DNA interactions genome-wide with high precision and sensitivity. We have used the DamID-seq assay to study genome-nuclear lamina (NL) interactions in mammalian cells, and have noticed that DamID-seq provides a high resolution and a wide dynamic range in detecting genome-NL interactions. The DamID-seq approach enables probing NL associations within gene structures and allows comparing genome-NL interaction maps with other functional genomic data, such as ChIP-seq and RNA-seq.

We describe herein an assay by coupling DNA adenine methyltransferase identification (DamID) to high throughput sequencing (DamID-seq). This improved method provides a higher resolution and a wider dynamic range, and allows analyzing DamID-seq data in conjunction with other high throughput sequencing data such as ChIP-seq, RNA-seq, etc.

DamID-seq: Genoma-wide Mapeamento das Interações Proteína-DNA por High Throughput Sequencing de fragmentos de DNA metilado-Adenina

The DNA adenine methyltransferase identification (DamID) assay is a powerful method to detect protein-DNA interactions both locally and genome-wide. It is ...

Amplification, Next-generation Sequencing, and Genomic DNA Mapping of Retroviral Integration Sites

Retroviruses exhibit signature integration preferences on both the local and global scales. Here, we present a detailed protocol for (1) generation of diverse libraries of retroviral integration sites using ligation-mediated PCR (LM-PCR) amplification and next-generation sequencing (NGS), (2) mapping the genomic location of each virus-host junction using BEDTools, and (3) analyzing the data for statistical relevance. Genomic DNA extracted from infected cells is fragmented by digestion with restriction enzymes or by sonication. After suitable DNA end-repair, double-stranded linkers are ligated onto the DNA ends, and semi-nested PCR is conducted using primers complementary to both the long terminal repeat (LTR) end of the virus and the ligated linker DNA. The PCR primers carry sequences required for DNA clustering during NGS, negating the requirement for separate adapter ligation. Quality control (QC) is conducted to assess DNA fragment size distribution and adapter DNA incorporation prior to NGS. Sequence output files are filtered for LTR-containing reads, and the sequences defining the LTR and the linker are cropped away. Trimmed host cell sequences are mapped to a reference genome using BLAT and are filtered for minimally 97% identity to a unique point in the reference genome. Unique integration sites are scrutinized for adjacent nucleotide (nt) sequence and distribution relative to various genomic features. Using this protocol, integration site libraries of high complexity can be constructed from genomic DNA in three days. The entire protocol that encompasses exogenous viral infection of susceptible tissue culture cells to integration site analysis can therefore be conducted in approximately one to two weeks. Recent applications of this technology pertain to longitudinal analysis of integration sites from HIV-infected patients.

We describe a protocol for amplifying retroviral integration sites from the genomic DNA of infected cells, sequencing the amplified virus-host junctions, and then mapping these sequences to a reference genome. We also describe techniques to quantify the distribution of integration sites relative to various genomic annotations using BEDTools.

Amplificação, sequenciamento de próxima geração, e Genomic DNA Mapeamento das retrovirais Integração Sites

Retroviruses exhibit signature integration preferences on both the local and global scales. Here, we present a detailed protocol for (1) generation of ...