Name: disposable dosators for pulmonary insufflation of therapeutic agents to small animals
Uploaded: 2017-03-30T13:00:00
Description: Watch this Scientific Journal Video about Disposable Dosators for Pulmonary Insufflation of Therapeutic Agents to Small Animals at JoVE.com

Authors would like to kindly thank the National Institute for Allergy and Infectious Disease for the funding to conduct this research.

1. Preparation of Components of the Dosators
<ol>
	<li>Perforate the bottom of a 0.5 mL polypropylene microcentrifuge tube by drilling or by simply grinding or cutting off the bottom with a grinding wheel or a sharp pair of scissors. Ensure that the hole is in the center and is no more than 2 mm in diameter and no less than 1 mm in diameter (Figure 1).</li>
	<li>Perforate the top of the microcentrifuge tube. Using a #22 drill bit (approximately 4 mm in diameter), drill a hole in the center of the cap. ...

<ol>
	<li>Young, E. F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhaled+Pyrazinoic+Acid+Esters+for+the+Treatment+of+Tuberculosis.">Inhaled Pyrazinoic Acid Esters for the Treatment of Tuberculosis.</a> Pharmaceutical Research. , 1-11 (2016).</li><li>Hinds, W. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles. , (2012).</li><li>Islam, N., Gladki, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dry+powder+inhalers+(DPIs)-A+review+of+device+reliability+and+innovation.">Dry powder inhalers (DPIs)-A review of device reliability and innovation.</a> International Journal of Pharmaceutics. 360 (1-2), 1-11 (2008).</li><li>Chan, H. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dry+powder+aerosol+delivery+systems:+current+and+future+research+directions.">Dry powder aerosol delivery systems: current and future research directions.</a> J Aerosol Med. 19 (1), 21-27 (2006).</li><li>Vehring, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pharmaceutical+Particle+Engineering+via+Spray+Drying.">Pharmaceutical Particle Engineering via Spray Drying.</a> Pharmaceutical Research. 25 (5), 999-1022 (2008).</li><li>Bosquillon, C., Lombry, C., Pr&#233;at, V., Vanbever, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+formulation+excipients+and+physical+characteristics+of+inhalation+dry+powders+on+their+aerosolization+performance.">Influence of formulation excipients and physical characteristics of inhalation dry powders on their aerosolization performance.</a> Journal of Controlled Release. 70 (3), 329-339 (2001).</li><li>Hickey, A. J., Concessio, N. M., Van Oort, M. M., Platz, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Factors+influencing+the+dispersion+of+dry+powders+as+aerosols.">Factors influencing the dispersion of dry powders as aerosols.</a> Pharmaceutical Technology. 18 (8), 58-64 (1994).</li><li>Garcia-Contreras, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhaled+large+porous+particles+of+capreomycin+for+treatment+of+tuberculosis+in+a+guinea+pig+model.">Inhaled large porous particles of capreomycin for treatment of tuberculosis in a guinea pig model.</a> Antimicrob Agents Chemother. 51 (8), 2830-2836 (2007).</li><li>Durham, P. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spray+Dried+Aerosol+Particles+of+Pyrazinoic+Acid+Salts+for+Tuberculosis+Therapy.">Spray Dried Aerosol Particles of Pyrazinoic Acid Salts for Tuberculosis Therapy.</a> Molecular Pharmaceutics. 12 (8), 2574-2581 (2015).</li><li>Sung, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dry+powder+nitroimidazopyran+antibiotic+PA-824+aerosol+for+inhalation.">Dry powder nitroimidazopyran antibiotic PA-824 aerosol for inhalation.</a> Antimicrob Agents Chemother. 53 (4), 1338-1343 (2009).</li><li>Guillon, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pulmonary+delivery+of+dry+powders+to+rats:+tolerability+limits+of+an+intra-tracheal+administration+model.">Pulmonary delivery of dry powders to rats: tolerability limits of an intra-tracheal administration model.</a> Int J Pharm. 434 (1-2), 481-487 (2012).</li><li>Morello, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dry-powder+pulmonary+insufflation+in+the+mouse+for+application+to+vaccine+or+drug+studies.">Dry-powder pulmonary insufflation in the mouse for application to vaccine or drug studies.</a> Tuberculosis. 89 (5), 371-377 (2009).</li></ol>

The dispersion from the dosators was suitable for animals to receive a therapeutic dose via passive nose-only respiration, indicating a large proportion of aerosol dispersed to primary particle size. These dosators can be used for endotracheal administration, in vitro evaluation of powder performance, and general purpose dry powder aerosol dispersion for analytical or efficacious experiments. If used for intrapulmonary delivery, it is important to use an appropriate volume of air for the species chosen, as over-...

Development of new therapeutic products requires efficacy testing in an animal model. The pulmonary route of administration can be utilized to deliver drugs locally and systemically 1. Evaluation of dry powder aerosols necessitates an efficient dispersion mechanism to maintain high concentrations in an exposure chamber or for direct endotracheal administration. While solutions exist to expose animals by passive inhalation to dry powder aerosols, most require masses of powder in large excess of the dose delivered 2.
This precludes conducting early feasibility studies as insufficient drug is available at the research or early development stage to support the dose delivery requirements for conventional aerosol delivery systems.
When designing an aerosol drug product, aerodynamic performance can relate directly to delivery efficiency and efficacy 3. Dispersion of powder into an aerosol requires energy input sufficient to overcome interparticulate forces, and particle engineering approaches can substantially improve aerosol performance 4,5,6. We have developed a dispersion system (dosator) which can aerosolize engineered dry powder aerosols efficiently for the purpose of direct pulmonary insufflation, dispersion into an exposure system or generation for analytical purposes.

<table border="0" cellpadding="0" cellspacing="0" width="1158">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:695px;">0.5 mL microcentrifuge tube</td>
			<td style="width:139px;">VWR</td>
			<td style="width:119px;">89000-026</td>
			<td style="width:207px;"></td>
		</tr>
		<tr height="23">
			<td height="23" style="height:23px;">High-Volume Particle-Filtering Stainless Steel Wire Cloth, Woven, 304 Stainless Steel, 60 x 60 Mesh, .0045&#34; Wire Diameter</td>
			<td style="width:139px;">McMaster Carr</td>
			<td style="width:119px;">9230T44</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Stainless Steel Dispensing Needle, Straight, 18 Gauge, 1&#34; Long</td>
			<td style="width:139px;">McMaster Carr</td>
			<td style="width:119px;">75165A676</td>
			<td>Any luer-fit needle will suffice</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:695px;">Cotton balls</td>
			<td style="width:139px;">McMaster Carr</td>
			<td style="width:119px;">54845T16</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:695px;">Parafilm M&#174; Laboratory Film</td>
			<td style="width:139px;">VWR</td>
			<td>100229-550</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Black-Oxide High-Speed Steel Jobbers&#39; Drill Bit, Wire Gauge 22, 3-1/8&#34; Overall Length, 1.8&#34; Drill Depth, 135Deg Point</td>
			<td style="width:139px;">McMaster Carr</td>
			<td style="width:119px;">2901A195</td>
			<td></td>
		</tr>
	</tbody>
</table>

disposable dosators for pulmonary insufflation of therapeutic agents to small animals

Development of new therapeutic products requires efficacy testing in an animal model. The pulmonary route of administration can be utilized to deliver drugs locally and systemically. Evaluation of dry powder aerosols necessitates an efficient dispersion mechanism to maintain high concentrations in an exposure chamber or for direct endotracheal administration. While solutions exist to expose animals by passive inhalation to dry powder aerosols, most require masses of powder in large excess of the dose delivered. This precludes conducting early feasibility studies as insufficient drug is available at the research or early development stage to support the dose delivery requirements for conventional aerosol delivery systems. When designing an aerosol drug product, aerodynamic performance can relate directly to delivery efficiency and efficacy. Dispersion of powder into an aerosol requires energy input sufficient to overcome interparticulate forces, and particle engineering approaches can substantially improve aerosol performance. We have developed a dispersion system (dosator) which can aerosolize engineered dry powder aerosols efficiently for the purpose of direct pulmonary insufflation, dispersion into an exposure system or generation for analytical purposes.

For easily dispersible powders such as those spray-dried with the intent for pulmonary delivery 5,8,9, the dosators deliver a bolus dose out of the device. There are many applications for the dosators, including in vitro particle characterization, direct intrapulmonary administration in live animals, and aerosol generation for passive inhalation systems.
<p class="jove_content" fo:ke...

Watch this Scientific Journal Video about Disposable Dosators for Pulmonary Insufflation of Therapeutic Agents to Small Animals at JoVE.com

Disposable Dosators for Pulmonary Insufflation of Therapeutic Agents to Small Animals

During development of drugs for pulmonary delivery, it is necessary to evaluate pharmacokinetics and efficacy in an animal model. We present a method to build a disposable aerosol dispersion system from of-the-shelf components that can be used to administer intrapulmonary dry powder aerosol to rodents.

Development of new therapeutic products requires efficacy testing in an animal model. The pulmonary route of administration can be utilized to deliver ...

Research

JoVE Journal

Medicine

Bronchial Thermoplasty:  A Novel Therapeutic Approach to Severe Asthma

Bronchial thermoplasty is a non-drug procedure for severe persistent asthma that delivers thermal energy to the airway wall in a precisely controlled ...

Orthotopic Xenografting of Human Luciferase-Tagged Malignant Peripheral Nerve Sheath Tumor Cells for in vivo Testing of Candidate Therapeutic Agents

Orthotopic Xenografting of Human Luciferase-Tagged Malignant Peripheral Nerve Sheath Tumor Cells for in vivo Testing of Candidate Therapeutic Agents

Although in vitro screens are essential for the initial identification of candidate therapeutic agents, a rigorous assessment of the drug's ability to ...

Delivery of Therapeutic Agents Through Intracerebroventricular (ICV) and Intravenous (IV) Injection in Mice

Delivery of Therapeutic Agents Through Intracerebroventricular ICV and Intravenous IV Injection in Mice

Despite the protective role that blood brain barrier plays in shielding the brain, it limits the access to the central nervous system (CNS) which most ...

Protocol for Long Duration Whole Body Hyperthermia in Mice

Hyperthermia is a general term used to define the increase in core body temperature above normal. It is often used to describe the increased core body ...

Computed Tomography-guided Time-domain Diffuse Fluorescence Tomography in Small Animals for Localization of Cancer Biomarkers

Small animal fluorescence molecular imaging (FMI) can be a powerful tool for preclinical drug discovery and development studies1. However, light ...

Automated Measurement of Pulmonary Emphysema and Small Airway Remodeling in Cigarette Smoke-exposed Mice

COPD is projected to be the third most common cause of mortality world-wide by 2020(1).  Animal models of COPD are used to identify molecules that ...

TRUE Gene Silencing: Screening of a Heptamer-type Small Guide RNA Library for Potential Cancer Therapeutic Agents

TRUE gene silencing (termed after tRNase ZL-utilizing efficacious gene silencing) is one of the RNA-directed gene silencing technologies, which utilizes ...

An Optimized Evans Blue Protocol to Assess Vascular Leak in the Mouse

Vascular leak, or plasma extravasation, has a number of causes, and may be a serious consequence or symptom of an inflammatory response. This study may ...

An Efficient Sieving Method to Isolate Intact Glomeruli from Adult Rat Kidney

Preservation of glomerular structure and function is pivotal in the prevention of glomerulonephritis, a category of kidney disease characterized by ...

Validated LC-MS/MS Panel for Quantifying 11 Drug-Resistant TB Medications in Small Hair Samples

Drug resistant-tuberculosis (DR-TB) is a growing public health threat, and assessment of therapeutic drug levels may have important clinical benefits. ...