June 2nd, 2017
•Isolating electrical and thermal effects on electrically assisted deformation (EAD) is very difficult using macroscopic samples. Metallic sample micro- and nanostructures together with a custom test procedure have been developed to evaluate the impact of applied current on the formation without joule heating and evolution of dislocations on these samples.
Videos relacionados
Concurrent Quantitative Conductivity and Mechanical Properties Measurements of Organic Photovoltaic Materials using AFM
Thermal Measurement Techniques in Analytical Microfluidic Devices
Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials
Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels
High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis
Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing
Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses
Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper
ACERCA DE JoVE
Copyright © 2024 MyJoVE Corporation. Todos los derechos reservados