Name: curtain flow column: optimization of efficiency and sensitivity
Uploaded: 2016-06-12T13:00:00
Description: Watch this Scientific Journal Video about Curtain Flow Column: Optimization of Efficiency and Sensitivity at JoVE.com

One of the authors (DK) acknowledges the receipt of an Australian Postgraduate Award.

Caution: Please refer to material safety data sheets (MSDS) for all materials and reagents before use (i.e., MSDS for methanol). Ensure the use of all appropriate safety practices when handling solvents and High Performance Liquid Chromatography (HPLC) eluent. Ensure appropriate use of engineering controls of HPLC, analytical balance and detector instrumentation, and ensure the use of personal protective equipment (safety glasses, gloves, lab coat, full length pants, and closed-toe shoes).
<p class="jove_con...

<ol>
	<li>Camenzuli, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+use+of+parallel+segmented+outlet+flow+columns+for+enhanced+mass+spectral+sensitivity+at+high+chromatographic+flow+rates.">The use of parallel segmented outlet flow columns for enhanced mass spectral sensitivity at high chromatographic flow rates.</a> Rapid Commun. Mass Sp. 26 (8), 943-949 (2012).</li><li>Camenzuli, M., Ritchie, H. J., Ladine, J. R., Shalliker, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enhanced+separation+performance+using+a+new+column+technology:+Parallel+segmented+outlet+flow.">Enhanced separation performance using a new column technology: Parallel segmented outlet flow.</a> J. Chromatogr. A. 1232, 47-51 (2012).</li><li>Camenzuli, M., Ritchie, H. J., Shalliker, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gradient+elution+chromatography+with+segmented+parallel+flow+column+technology:+A+study+on+4.6mm+analytical+scale+columns.">Gradient elution chromatography with segmented parallel flow column technology: A study on 4.6mm analytical scale columns.</a> J. Chromatogr. A. 1270, 204-211 (2012).</li><li>Camenzuli, M., Ritchie, H. J., Shalliker, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improving+HPLC+separation+performance+using+parallel+segmented+flow+chromatography.">Improving HPLC separation performance using parallel segmented flow chromatography.</a> Microchem. J. 111, 3-7 (2013).</li><li>Camenzuli, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Parallel+segmented+outlet+flow+high+performance+liquid+chromatography+with+multiplexed+detection.">Parallel segmented outlet flow high performance liquid chromatography with multiplexed detection.</a> Anal. Chim. Acta. 803, 154-159 (2013).</li><li>Kocic, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+through-put+and+highly+sensitive+liquid+chromatography-tandem+mass+spectrometry+separations+of+essential+amino+acids+using+active+flow+technology+chromatography+columns.">High through-put and highly sensitive liquid chromatography-tandem mass spectrometry separations of essential amino acids using active flow technology chromatography columns.</a> J. Chromatogr. A. 1305, 102-108 (2013).</li><li>Shalliker, R. A., Ritchie, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Segmented+flow+and+curtain+flow+chromatography:+Overcoming+the+wall+effect+and+heterogeneous+bed+structures.">Segmented flow and curtain flow chromatography: Overcoming the wall effect and heterogeneous bed structures.</a> J. Chromatogr. A. 1335, 122-135 (2014).</li><li>Shellie, R., Haddad, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comprehensive+two-dimensional+liquid+chromatography.">Comprehensive two-dimensional liquid chromatography.</a> Anal. Bioanal. Chem. 386 (3), 405-415 (2006).</li><li>Abia, J. A., Mriziq, K. S., Guiochon, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radial+heterogeneity+of+some+analytical+columns+used+in+high-performance+liquid+chromatography.">Radial heterogeneity of some analytical columns used in high-performance liquid chromatography.</a> J. Chromatogr. A. 1216 (15), 3185-3191 (2009).</li><li>Knox, J. H., Laird, G. R., Raven, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interaction+of+radial+and+axial+dispersion+in+liquid+chromatography+in+relation+to+the+&amp;#34;infinite+diameter+effect&amp;#34.">Interaction of radial and axial dispersion in liquid chromatography in relation to the &amp;#34;infinite diameter effect&amp;#34.</a> J. Chromatogr. A. 122, 129-145 (1976).</li><li>Miyabe, K., Guiochon, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Estimation+of+the+column+radial+heterogeneity+from+an+analysis+of+the+characteristics+of+tailing+peaks+in+linear+chromatography.">Estimation of the column radial heterogeneity from an analysis of the characteristics of tailing peaks in linear chromatography.</a> J. Chromatogr. A. 830 (1), 29-39 (1999).</li><li>Shalliker, R. A., Scott Broyles, B., Guiochon, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Axial+and+radial+diffusion+coefficients+in+a+liquid+chromatography+column+and+bed+heterogeneity.">Axial and radial diffusion coefficients in a liquid chromatography column and bed heterogeneity.</a> J. Chromatogr. A. 994 (1-2), 1-12 (2003).</li><li>Gritti, F., Guiochon, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+the+thermal+heterogeneity+of+the+column+on+chromatographic+results.">Effects of the thermal heterogeneity of the column on chromatographic results.</a> J. Chromatogr. A. 1131 (1-2), 151-165 (2006).</li><li>Shalliker, R. A., Wong, V., Broyles, B. S., Guiochon, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+bed+compression+in+an+axial+compression+liquid+chromatography+column.">Visualization of bed compression in an axial compression liquid chromatography column.</a> J. Chromatogr. A. 977 (2), 213-223 (2002).</li><li>Tallarek, U., Albert, K., Bayer, E., Guiochon, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+transverse+and+axial+apparent+dispersion+coefficients+in+packed+beds.">Measurement of transverse and axial apparent dispersion coefficients in packed beds.</a> AICHE J. 42 (11), 3041-3054 (1996).</li><li>Camenzuli, M., Ritchie, H. J., Ladine, J. R., Shalliker, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Active+flow+management+in+preparative+chromatographic+separations:+A+preliminary+investigation+into+enhanced+separation+using+a+curtain+flow+inlet+fitting+and+segmented+flow+outlet.">Active flow management in preparative chromatographic separations: A preliminary investigation into enhanced separation using a curtain flow inlet fitting and segmented flow outlet.</a> J. Sep. Sci. 35 (3), 410-415 (2012).</li><li>Shalliker, R. A., Broyles, B. S., Guiochon, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Physical+evidence+of+two+wall+effects+in+liquid+chromatography.">Physical evidence of two wall effects in liquid chromatography.</a> J. Chromatogr. A. 888 (1-2), 1-12 (2000).</li><li>Shalliker, R. A., Camenzuli, M., Pereira, L., Ritchie, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Parallel+segmented+flow+chromatography+columns:+Conventional+analytical+scale+column+formats+presenting+as+a+'virtual'+narrow+bore+column.">Parallel segmented flow chromatography columns: Conventional analytical scale column formats presenting as a 'virtual' narrow bore column.</a> J. Chromatogr. A. 1262, 64-69 (2012).</li><li>Camenzuli, M., Ritchie, H. J., Ladine, J. R., Shalliker, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+design+of+a+new+concept+chromatography+column.">The design of a new concept chromatography column.</a> Analyst. 136 (24), 5127-5130 (2011).</li><li>Foley, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Precision+and+Reliability:+an+Intercontinental+Study+of+Curtain+Flow+Chromatography.">Precision and Reliability: an Intercontinental Study of Curtain Flow Chromatography.</a> Thermo Scientific. , (2013).</li><li>Pravadali-Cekic, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multidimensional+Approaches+for+the+Analysis+of+Complex+Samples+using+HPLC.">Multidimensional Approaches for the Analysis of Complex Samples using HPLC.</a> University of Western Sydney. , (2014).</li><li>Soliven, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improving+the+performance+of+narrow-bore+HPLC+columns+using+active+flow+technology.">Improving the performance of narrow-bore HPLC columns using active flow technology.</a> Microchem. J. 116, 230-234 (2014).</li><li>Foley, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Curtain+flow+chromatography+('the+infinite+diameter+column')+with+automated+injection+and+high+sample+through-put:+The+results+of+an+inter-laboratory+study.">Curtain flow chromatography ('the infinite diameter column') with automated injection and high sample through-put: The results of an inter-laboratory study.</a> Microchem. J. 110, 127-132 (2013).</li></ol>

This study involved the inter-laboratory analysis of CF chromatography columns to test the analytical performance in terms of efficiency and sensitivity. The CF column was set up with a dual pumping system as described in section &#39;3. Dual pump system set up&#39; to achieve a flow ratio of 40:60 (center:peripheral) on the inlet of the CF column. The 40:60 (center:peripheral) flow ratio was achieved by setting the flow rate of each pump to the value that represents 40% and 60% of the total flow rate, respectively. The ...

In recent years column technology for High Performance Liquid Chromatography (HPLC) has advanced greatly; peak capacities have increased considerably thanks largely to the use of smaller particle sizes and the more efficient core shell particles. Since separations are generally more efficient, a flow-on effect has been an increase in sensitivity since peaks are now sharper and hence taller1-8.
Nevertheless, radial bed heterogeneity is still a limiting factor in the performance of all columns, but this is not a new story since chromatographers have known this for many years. Column beds are heterogeneous in both the radial direction9-12, and along the column axis10,12-15. The wall-effect especially is an important contributor to the loss of separation performance7,16-18. Shalliker and Ritchie7 recently reviewed aspects of column bed heterogeneity and hence this need not be discussed here further. Although suffice to say, that the variation in column bed packing density and the wall effects lead to a distortion of the solute plug, such that bands elute through the column in plugs that resemble partially filled soup bowls rather than thin flat solid discs7 that are usually depicted in basic teaching texts. When experiments were undertaken such that the solute migration through the bed could be visualized the plug profiles inside the column were partly hollow and the tailing section of the band is largely the wall component of the sample plug. The end result is that it takes many more plates to separate these &#39;partially hollow&#39; plugs than would be required if the discs were solid and flat12,14,17. To overcome the band broadening issues associated with wall effects and the variation in radial packing density, a new form of column technology known as Active Flow Technology (AFT) was designed7,19. The purpose of this design was to remove wall effects through the physical separation of solvent eluting along the wall region, from that of mobile phase eluting in the radial central region of the column19. There are two main types of AFT columns; Parallel Segmented Flow (PSF) columns and Curtain Flow (CF) columns 7. Since this protocol is aimed at the use and optimization of CF columns, PSF columns will not be further discussed.
Curtain Flow (CF)
Curtain Flow (CF) column formats utilize AFT end-fittings at both the inlet and the outlet of the column. AFT end-fittings consist of an annular frit located inside a multiport fitting. The frit is made up of three parts: a porous radial central portion that is aligned with the central port of the end fitting, a porous outer portion that is aligned with the peripheral port(s) of the end fitting, and an impermeable ring that separates the two porous portions preventing any cross-flow between the radial central and outer regions of the frit19. Figure 1 illustrates the design of the AFT frit and Figure 2 illustrates the CF column format. In this mode of operation (CF) the sample is injected into the radial central port of the inlet fitting, whilst additional mobile phase is introduced through the peripheral port of the inlet to &#39;curtain&#39; the migration of solutes through the radial central region of the column. Hence the sample enters the bed in the radial central region of the column with the outer region of the column having mobile phase only passed through it. Studies have shown that a volumetric flow rate ratio of around 40:60 (central:peripheral port) for the inlet end-fitting of a 4.6 mm internal diameter (i.d.) column is optimal6,7,16. The AFT outlet of the CF column allows the adjustment of the central and peripheral flow to their relative portion and can be varied to almost any desired ratio through pressure management. The optimization of a CF column can significantly improve various functional aspects of the column technology, such as separation efficiency or detection sensitivity. In this manner a &#39;wall-less&#39;, &#39;infinite-diameter&#39; or &#39;virtual&#39; column is established6,10,18,20. The purpose of CF columns is to actively manage the migration of sample through the column to prevent the sample from reaching the wall region. Thus, the solute concentration upon exit to the detector is maximized, increasing sensitivity of around 2.5 times greater than the conventional column format when using Ultraviolet (UV) detection16, and even greater when using mass spectral detection6.
CF columns are ideally suited for low concentration samples, since detection sensitivity is increased. Further, they are ideal when coupled to flow rate limited detectors, such as the mass spectrometer (MS)6. An AFT column in a 4.6 mm i.d. format, for example can be tuned to deliver the same volume of solvent to a detector as a standard 2.1 mm i.d. format column when operated at the same linear velocities, by adjusting exiting central flow to 21%. Likewise the AFT column could also be tuned to deliver the same volume load to a detector as a 3.0 mm i.d. column, by adjusting exiting central flow to 43%. In fact any &#39;virtual&#39; column format could be produced to suit the analytical requirement6,18,22. Using these specially designed end-fittings at the inlet and the outlet ensures that a true wall-less column is established.
There are two ways to set up the solvent delivery system to the central and peripheral ports of the inlet: split-flow system6 and two pump system6,7. Figure 3 illustrates each of these CF system set ups.
Split-flow system
In a split-flow system (Figure 3A) the pump flow leading to the injector is split pre-injector using a zero-dead volume T-piece, where one flow stream of mobile phase is connected to the injector, which is then connected to the central port of the inlet end-fitting of the column. The second flow stream of mobile phase by-passes the injector and is connected to the peripheral port on the inlet of the column. During the splitting of flow, the flow stream percentage is adjusted to 40:60 (center:peripheral) before the lines are connected to the column, i.e., from injector to center and pump to peripheral.
Two pump system
The CF column requires two flow streams at the inlet end-fitting of the column. Depending on the type of autosampler/injector of the HPLC instrument, split-flow set up may not be possible, and so CF can then be achieved through 2 pumps (Figure 3B21). Each pump is allocated and connected to either the central or peripheral port and the flow rate is set to represent 40% of flow for central port and 60% for peripheral port. For example, if the total flow rate is 1.0 ml min-1, the central pump flow rate is set to 0.4 ml min-1 and the peripheral pump is set to 0.6 ml min-1.
The choice of which mode of operation is largely dependent on the HPLC instrumentation and chromatographic mode of operation. For example in some autosamplers a change in pressure between sample load position and sample inject position may occur disrupting the split-flow ratio and thus in this case a dual pump set up would be recommended for optimal CF performance. Regardless of the solvent delivery system set up chosen for the inlet of the CF column, the CF outlet optimization remains the same. The outlet central port of the CF column is attached to the Ultraviolet-Visible (UV-Vis) detector with the smallest volume possible of tubing to minimize the effects of post-column dead volume. Since, CF columns emulate narrow-bore columns, dead volume between the column outlet and the detector is detrimental to the separation performance of the CF column. It is critical to ensure the smallest amount of volume of tubing between the central port and the UV-Vis detector to minimize the effects of dead volume such as band broadening, loss in efficiency and sensitivity. Hence, the use of narrow bore tubing (0.1 mm i.d.) is advised to readily allow pressure adjustments without adding inappropriate dead volume. Tubing is also attached to the peripheral port and directed to waste. Upon the outlet of the CF column, the segmentation ratio can be adjusted to any ratio that fits the purpose of the analyst. When a 4.6 mm i.d. CF is used, for example, it is often convenient to set the ratio as either 43:57 or 21:79 (center:peripheral) to emulate a &#39;virtual&#39; 3.0 mm i.d. column or 2.1 mm i.d. column, respectfully. That way the separation performance is readily bench-marked. The segmentation ratio is measured by weighing the amount of flow exiting from the detector that is connected to the central port and flow exiting the peripheral port over a period time. The percentage flow through each port can then be determined and the ratios can be adjusted by altering the length of tubing attached or using tubing that has a different internal diameter (i.d.).
This video protocol details the operation and optimization procedures of a CF column for enhanced chromatographic performance.

<table border="0" cellpadding="0" cellspacing="0" width="686">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">HPLC instrument</td>
			<td style="width:167px;"></td>
			<td style="width:119px;"></td>
			<td style="width:185px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Additional Pump</td>
			<td style="width:167px;"></td>
			<td style="width:119px;"></td>
			<td>Required if 2 pump CF system set up is to be used.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Curtain Flow HPLC column</td>
			<td style="width:167px;">Thermo Fisher Scientific</td>
			<td style="width:119px;">Not Defined</td>
			<td>Soon to be commercialised</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Methanol</td>
			<td style="width:167px;">Any brand</td>
			<td style="width:119px;"></td>
			<td>HPLC Grade</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">PEEK tubing</td>
			<td style="width:167px;">Any brand</td>
			<td style="width:119px;"></td>
			<td>Various lengths and i.d.&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">PEEK tube cutter</td>
			<td style="width:167px;">Any brand</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Analytical Scale Balance</td>
			<td style="width:167px;">Any brand</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Stop watch</td>
			<td style="width:167px;">Any brand</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Eluent collection vessels</td>
			<td style="width:167px;">Any brand</td>
			<td style="width:119px;"></td>
			<td>1-2 mL Sample vials can be used as eluent collection vessels</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">T-piece</td>
			<td>Any brand</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
	</tbody>
</table>

curtain flow column: optimization of efficiency and sensitivity

Active Flow Technology (AFT) is a form of column technology that increases the separation performance of a HPLC column through the use of a specially purpose built multiport end-fitting(s). Curtain Flow (CF) columns belong to the AFT suite of columns, specifically the CF column is designed so that the sample is injected into the radial central region of the bed and a curtain flow of mobile phase surrounding the injection of solute prevents the radial dispersion of the sample to the wall. The column functions as an 'infinite diameter' column. The purpose of the design is to overcome the radial heterogeneity of the column bed, and at the same time maximize the sample load into the radial central region of the column bed, which serves to increase detection sensitivity. The protocol described herein outlines the system and CF column set up and the tuning process for an optimized infinite diameter 'virtual' column.

AFT columns were developed using a specialized frit design (Figure 1) in the multiport column end-fittings to overcome the column bed heterogeneity and improve separation performance. An inter-laboratory study on the separation performance of CF chromatography columns (Figure 2) was carried out with a dual pump system set up (Figure 3B) as described in section 3 of this protocol23. A three component test mixture was analyzed un...

Watch this Scientific Journal Video about Curtain Flow Column: Optimization of Efficiency and Sensitivity at JoVE.com

Curtain Flow Column: Optimization of Efficiency and Sensitivity

Here, we present a protocol for the operation and optimization of Active Flow Technology (AFT) column in Curtain flow (CF) mode for enhanced separation performance.

Active Flow Technology (AFT) is a form of column technology that increases the separation performance of a HPLC column through the use of a specially ...

The overall goal of this method is to improve the efficiency and sensitivity of a separation through the optimization of a curtain flow column. This method can help answer key questions in the field of environmental sciences, forensics, and in areas that require trace sample analysis, where an efficient and highly sensitive separation technique is required. The main advantage of this technique is that it increases the efficiency of a separation and the sensitivity of the analysis compared to conventional methods of HPLC separation.This method can provide a means to increase the separation power, and thus speed capacity, in an economically and time-efficient way. The curtain flow column is a new concept to practitioners of HPLC, however, its use is not complicated. It simply requires the optimization of appropriate flow ratios.First, prepare bottles of 100 percent ultra pure water, and 100 methanol for mobile phases A and B of the HPLC instrument. Purge the pumps as per manufacturer requirement. After purging, disconnect the pump line from the injector valve of the auto sampler.Attach a T piece to the disconnected line. To each port of the T piece, attach tubing of 0.13 millimeter internal diameter and 15 centimeters long. Connect one tube from the T piece to the injector valve of the auto sampler.Finally, set the pump to a flow rate of one milliliter per minute. Tare two empty collection vessels and label them central and peripheral. For 60 seconds, use the central-labeled vessel to collect the exiting mobile phase from the line coming from the injector.Re-weigh the central vessel and determine the mass of the collected mobile phase. Repeat this process by collecting the flow through of the peripheral port with the peripheral-labeled vessel. Determine the percentage of flow, or milliliters per minute, from each line using the indicated equations.The central port should be about 40 percent, and the peripheral port about 60 percent. If the values differ by more than two percent, change the tubing length or diameter to adjust the flow ratio. Then repeat the collection and the calculation steps.Next, turn the pump flow off and connect the injector line to the central port of the column inlet. Also connect the line from the T piece to the peripheral port of the column inlet. Slowly ramp the flow rate to one milliliter per minute of 100 percent mobile phase B.To finish tuning the system, flow 100 percent methanol at one milliliter per minute for 10 minutes to equilibrate the column.To begin, use tubing to connect the central outlet port to the UV-Vis detector. Connect the same type and length of tubing to the peripheral outlet port of the CF column. Then, set the pump to a flow rate of one milliliter per minute.Tare two empty collection vessels and again label one for central collection and one for peripheral. For 60 seconds, use the central-labeled vessel to collect the exiting mobile phase from the UV-Vis detector. Re-weigh the collection vessel to determine the mass of solution eluded.Repeat this process with the peripheral outlet port and labeled collection vessel. Now determine the percentage flow from each line as performed earlier with the inlet flow. The UV-Vis line should be 21 percent, and the peripheral outlet flow should be 79 percent.If the flow ratio deviates significantly, adjust the size of the tubing attached to the exit of the UV-Vis detector to alter the central flow percentage. It is important that the flow ratios between the central and peripheral at the inlet and the outlet of the column follow this protocol to ensure optimal performance of the curtain flow column. Active flow technology columns were developed using a specialized frit design in the multiport column end fittings to overcome the column bed heterogeneity and improve separation performance.A test mixture containing phenetole, butylbenzene, and pentylbenzene was analyzed on conventional 4.6 and 2.1 millimeter internal diameter columns, and a 4.6 millimeter internal diamater curtain flow column. The separation of the mixture illustrates the improved performance in terms of efficiency and sensitivity of a curtain flow column relative to standard columns. The use of a curtain flow column increased the signal for butylbenzene despite the reduced peak volume.Once mastered, this technique can be set up in less than half an hour if it is performed properly. The curtain flow column setup can be reused over and again, but the flow ratios must be checked routinely. While attempting this procedure, it is important to remember to be as close to prescribed flow ratios as possible.The curtain flow column has paved the way for the researchers in the field of HPLC to push the limits of the columns and UPLC instruments to obtain faster sample analysis without compromising separation performance. After watching this video, you should understand the importance of curtain flow columns, as they can provide better separation than conventional HPLC columns.

Research

JoVE Journal

Chemistry

Use of Stopped-Flow Fluorescence and Labeled Nucleotides to Analyze the ATP Turnover Cycle of Kinesins

The kinesin superfamily of microtubule associated motor proteins share a characteristic motor domain which both hydrolyses ATP and binds microtubules. ...

Transport of Surface-modified Carbon Nanotubes through a Soil Column

Carbon nanotubes (CNTs) are widely manufactured nanoparticles, which are being utilized in a number of consumer products, such as sporting goods, ...

Optimization of Synthetic Proteins: Identification of Interpositional Dependencies Indicating Structurally and/or Functionally Linked Residues

Protein alignments are commonly used to evaluate the similarity of protein residues, and the derived consensus sequence used for identifying functional ...

Tuning a Parallel Segmented Flow Column and Enabling Multiplexed Detection

Active flow technology (AFT) is new form of column technology that was designed to overcome flow heterogeneity to increase separation performance in terms ...

Post Column Derivatization Using Reaction Flow High Performance Liquid Chromatography Columns

A protocol for the use of reaction flow high performance liquid chromatography columns for methods employing post column derivatization (PCD) is ...

Improved Heterojunction Quality in Cu2O-based Solar Cells Through the Optimization of Atmospheric Pressure Spatial Atomic Layer Deposited Zn1-xMgxO

Improved Heterojunction Quality in Cu2O-based Solar Cells Through the Optimization of Atmospheric Pressure Spatial Atomic Layer Deposited Zn1-xMgxO

Atmospheric pressure spatial atomic layer deposition (AP-SALD) was used to deposit n-type ZnO and Zn1-xMgxO thin films onto p-type thermally oxidized Cu2O ...

Radiolabeling and Quantification of Cellular Levels of Phosphoinositides by High Performance Liquid Chromatography-coupled Flow Scintillation

Phosphoinositides (PtdInsPs) are essential signaling lipids responsible for recruiting specific effectors and conferring organelles with molecular ...

A Protocol for Electrochemical Evaluations and State of Charge Diagnostics of a Symmetric Organic Redox Flow Battery

Redox flow batteries have been considered as one of the most promising stationary energy storage solutions for improving the reliability of the power grid ...

Continuous Flow Chemistry: Reaction of Diphenyldiazomethane with p-Nitrobenzoic Acid

Continuous Flow Chemistry: Reaction of Diphenyldiazomethane with p-Nitrobenzoic Acid

Continuous flow technology has been identified as instrumental for its environmental and economic advantages leveraging superior mixing, heat transfer and ...

Synthesis of Platinum-nickel Nanowires and Optimization for Oxygen Reduction Performance

Platinum-nickel (Pt-Ni) nanowires were developed as fuel cell electrocatalysts, and were optimized for the performance and durability in the oxygen ...