Name: synthesis of hierarchical zno/cdsse heterostructure nanotrees
Uploaded: 2016-11-29T12:30:00
Description: Watch this Scientific Journal Video about Synthesis of Hierarchical ZnO/CdSSe Heterostructure Nanotrees at JoVE.com

The authors thank Svilen Bobev for his help with the XRD spectra and K. Booksh for assistance with the sputter coater equipment.

1. Synthesis of Tree-like ZnO/CdSSe Nanostructures
<ol>
	<li>Pretreatment and gold coating of sapphire substrates 
	NOTE: The gold film acts as a catalyst in the growth of the ZnO nanowires.
	<ol>
		<li>Clean sapphire slides (a-plane, 10 &#215; 10 &#215; 1 mm) in 99.5% ethanol with 5 min of sonication to prepare the substrate for Au sputtering.</li>
		<li>Deposit a 10-nm (&#177; 2 nm)-thick film of gold onto the sapphire slides with a sputter coater and gold target.</li>
	</ol>
	</li>
	<li>Synthes...

<ol>
	<li>Swank, R. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surface+Properties+of+II-VI.">Surface Properties of II-VI.</a> Compounds. Phys. Rev. 153 (3), 844-849 (1967).</li><li>Bagnall, D. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optically+pumped+lasing+of+ZnO+at+room+temperature.">Optically pumped lasing of ZnO at room temperature.</a> Appl Phys. Lett. 70 (17), 2230-2232 (1997).</li><li>Zheng, Z. K., Xie, W., Lim, Z. S., You, L., Wang, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CdS+sensitized+3D+hierarchical+TiO2/ZnO+heterostructure+for+efficient+solar+energy+conversion.">CdS sensitized 3D hierarchical TiO2/ZnO heterostructure for efficient solar energy conversion.</a> Sci. Rep. 4, (2014).</li><li>Anta, J. A., Guill&#233;n, E., Tena-Zaera, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ZnO-Based+Dye-Sensitized+Solar+Cells.">ZnO-Based Dye-Sensitized Solar Cells.</a> J. Phys. Chem. C. 116 (21), 11413-11425 (2012).</li><li>Pelligra, C. I., Majewski, P. W., Osuji, C. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large+area+vertical+alignment+of+ZnO+nanowires+in+semiconducting+polymer+thin+films+directed+by+magnetic+fields.">Large area vertical alignment of ZnO nanowires in semiconducting polymer thin films directed by magnetic fields.</a> Nanoscale. 5 (21), 10511-10517 (2013).</li><li>Reddy, N. K., Devika, M., Shpaisman, N., Ben-Ishai, M., Patolsky, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+cathodoluminescence+properties+of+CdSe/ZnO+hierarchical+nanostructures.">Synthesis and cathodoluminescence properties of CdSe/ZnO hierarchical nanostructures.</a> J. Mater. Chem. 21 (11), 3858-3864 (2011).</li><li>Lee, Y. L., Chi, C. F., Liau, S. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CdS/CdSe+Co-Sensitized+TiO2+Photoelectrode+for+Efficient+Hydrogen+Generation+in+a+Photoelectrochemical+Cell.">CdS/CdSe Co-Sensitized TiO2 Photoelectrode for Efficient Hydrogen Generation in a Photoelectrochemical Cell.</a> Chem. Mater. 22 (3), 922-927 (2010).</li><li>Rinc&#243;n, M. E., S&#225;nchez, M., Ruiz-Garc&#237;a, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photocorrosion+of+Coupled+CdS/CdSe+Photoelectrodes+Coated+with+ZnO:+Atomic+Force+Microscopy+and+X-Ray+Diffraction+Studies.">Photocorrosion of Coupled CdS/CdSe Photoelectrodes Coated with ZnO: Atomic Force Microscopy and X-Ray Diffraction Studies.</a> J. Electrochem. Soc. 145 (10), 3535-3544 (1998).</li><li>Leschkies, K. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photosensitization+of+ZnO+Nanowires+with+CdSe+Quantum+Dots+for+Photovoltaic+Devices.">Photosensitization of ZnO Nanowires with CdSe Quantum Dots for Photovoltaic Devices.</a> Nano Lett. 7 (6), 1793-1798 (2007).</li><li>Gonzalez-Valls, I., Lira-Cantu, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vertically-aligned+nanostructures+of+ZnO+for+excitonic+solar+cells:+a+review.">Vertically-aligned nanostructures of ZnO for excitonic solar cells: a review.</a> Energy Environ Sci. 2 (1), 19-34 (2009).</li><li>Zhu, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+vertically+aligned+ultra-long+ZnO+nanowires+on+heterogeneous+substrates+with+catalyst+at+the+root.">Synthesis of vertically aligned ultra-long ZnO nanowires on heterogeneous substrates with catalyst at the root.</a> Nanotechnology. 23 (5), 055604 (2012).</li><li>Yang, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlled+Growth+of+ZnO+Nanowires+and+Their+Optical+Properties.">Controlled Growth of ZnO Nanowires and Their Optical Properties.</a> Adv. Func. Mater. 12 (5), 323-331 (2002).</li><li>Myung, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Composition-Tuned+ZnO&#8722;CdSSe+Core&#8722;Shell+Nanowire+Arrays.">Composition-Tuned ZnO&#8722;CdSSe Core&#8722;Shell Nanowire Arrays.</a> ACS Nano. 4 (7), 3789-3800 (2010).</li><li>Pan, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Color-Tunable+Photoluminescence+of+Alloyed+CdSxSe1-x+Nanobelts.">Color-Tunable Photoluminescence of Alloyed CdSxSe1-x Nanobelts.</a> J. Am. Chem. Soc. 127 (45), 15692-15693 (2005).</li><li>Rakshit, T., Mondal, S. P., Manna, I., Ray, S. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CdS-decorated+ZnO+nanorod+heterostructures+for+improved+hybrid+photovoltaic+devices.">CdS-decorated ZnO nanorod heterostructures for improved hybrid photovoltaic devices.</a> ACS Appl. Mater. Inter. 4 (11), 6085-6095 (2012).</li><li>Nan, W. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crystal+Structure+Control+of+Zinc-Blende+CdSe/CdS+Core/Shell+Nanocrystals:+Synthesis+and+Structure-Dependent+Optical+Properties.">Crystal Structure Control of Zinc-Blende CdSe/CdS Core/Shell Nanocrystals: Synthesis and Structure-Dependent Optical Properties.</a> J. Am. Chem. Soc. 134 (48), 19685-19693 (2012).</li><li>Li, Z., Nieto-Pescador, J., Carson, A. J., Blake, J. C., Gundlach, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Efficient+Z-scheme+charge+separation+in+novel+vertically+aligned+ZnO/CdSSe+nanotrees.">Efficient Z-scheme charge separation in novel vertically aligned ZnO/CdSSe nanotrees.</a> Nanotechnology. 27 (13), 135401 (2016).</li></ol>

The vertical alignment of ZnO nanowires (stems) is based on epitaxial growth on the substrate. ZnO nanowires grow preferentially along the &#60;0001&#62; direction that matches with the periodicity of the a-plane of sapphire12. Therefore, the type and the quality of the substrate are very important. Different thicknesses of the gold coating on the substrate, from 5 nm to 20 nm, have been tested and showed no significant difference in the growth of ZnO nanowires. The length of the ZnO nanowires can be adjusted ...

ZnO is a II-VI semiconductor featuring a band gap (BG) of 3.3 eV, a high electron mobility, and a large exciton binding energy1,2. It is an abundant semiconducting material with a plethora of present and future applications in optical devices, solar cells, and photocatalysis. However, ZnO is transparent, which limits its application in the visible spectral range. Therefore, materials absorbing visible light, such as narrow-gap semiconductors3, dye molecules4, and photosensitive polymers5, have frequently been employed for sensitizing ZnO to visible light absorption.
CdS (BG 2.43 eV) and CdSe (BG 1.76 eV) are common II-VI narrow-gap semiconductors and have been intensively investigated. The BG and lattice parameters of the ternary alloy CdSSe can be adjusted by varying the mole ratios of the VI components6,7. ZnO/CdSSe nanocomposites have been reported to result in efficient photovoltaic energy conversion8,9.
Combining the efficient electron transport pathway of vertically aligned ZnO nanowires towards a substrate with the improved visible light absorption of the CdSSe branches led to efficient electron transfer between the stem and branches9,10. Thus, we synthesized a new tree-like ZnO/CdSSe nanostructure, where vertically aligned ZnO nanowires are decorated with CdSSe branches. This composite material can act as a building block for novel solar energy conversion devices.
This protocol describes how ZnO nanowire arrays are grown on a sapphire substrate by one-step chemical vapor deposition (CVD) from ZnO and C powders, following a procedure that has previously been published11. Following the growth of ZnO nanowires, a second step of CVD is employed to grow CdSSe branches on the ZnO nanowires. We employ X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) to measure the crystal structures, morphology, and composition of the ZnO/CdSSe nanotrees (NTs). The optical properties and charge carrier transfer mechanism between the branches and stem have been investigated by photoluminescence (PL) spectroscopy and time-resolved PL lifetime measurements.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>ZnO</td>
			<td>Sigma Aldrich</td>
			<td>1314-13-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Activated Carbon</td>
			<td>Alfa</td>
			<td>231-153-3</td>
			<td></td>
		</tr>
		<tr>
			<td>CdSe</td>
			<td>Sigma Aldrich</td>
			<td>1306-24-7</td>
			<td></td>
		</tr>
		<tr>
			<td>CdS</td>
			<td>Sigma Aldrich</td>
			<td>1306-23-6</td>
			<td></td>
		</tr>
		<tr>
			<td>Sapphire</td>
			<td>MTI</td>
			<td>2SP</td>
			<td>a-plane, 10 &#215; 10 &#215; 1 mm</td>
		</tr>
		<tr>
			<td>Furnace</td>
			<td>Lindberg Blue M</td>
			<td>SSP</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning electron microscope</td>
			<td>Hitachi</td>
			<td>S5700</td>
			<td>assembled with an Oxford Inca X-act detector</td>
		</tr>
		<tr>
			<td>X-ray powder diffractometer&#160;</td>
			<td>Rigaku&#160;</td>
			<td>MiniFlex</td>
			<td>filtered Cu K&#945; radiation (&#955;=1.5418 &#197;)</td>
		</tr>
		<tr>
			<td>Amplified Ti:sapphire oscillator&#160;</td>
			<td>Coherent Mantis</td>
			<td>Coherent Legend-Elite</td>
			<td></td>
		</tr>
		<tr>
			<td>Single photon detection module&#160;</td>
			<td>ID Quantique</td>
			<td>ID-100</td>
			<td></td>
		</tr>
		<tr>
			<td>Sputter coater</td>
			<td>Cressington</td>
			<td>308</td>
			<td>assembled with gold target</td>
		</tr>
		<tr>
			<td>Fiber probe spectrometer</td>
			<td>Photon Control</td>
			<td>SPM-002</td>
			<td></td>
		</tr>
		<tr>
			<td>Colored Glass Filter</td>
			<td>Thorlabs</td>
			<td>FGB37-A - &#216;25 mm BG40</td>
			<td>AR Coated: 350 - 700 nm&#160;</td>
		</tr>
		<tr>
			<td>Compressed argon gas</td>
			<td>Keen</td>
			<td>7440-37-1</td>
			<td></td>
		</tr>
	</tbody>
</table>

synthesis of hierarchical zno/cdsse heterostructure nanotrees

A two-step chemical vapor deposition procedure is here employed to prepare tree-like hierarchical ZnO/CdSSe hetero-nanostructures. The structures are composed of CdSSe branches grown on ZnO nanowires that are vertically aligned on a transparent sapphire substrate. The morphology was measured via scanning electron microscopy. The crystal structure was determined by X-ray powder diffraction analysis. Both the ZnO stem and CdSSe branches have a predominantly wurtzite crystal structure. The mole ratio of S and Se in the CdSSe branches was measured by energy dispersive X-ray spectroscopy. The CdSSe branches result in strong visible light absorption. Photoluminescence (PL) spectroscopy showed that the stem and branches form a type-II heterojunction. PL lifetime measurements showed a decrease in the lifetime of emission from the trees when compared to emission from individual ZnO stems or CdSSe branches and indicate fast charge transfer between CdSSe and ZnO. The vertically aligned ZnO stems provide a direct electron transport pathway to the substrate and allow for efficient charge separation after photoexcitation by visible light. The combination of the abovementioned properties makes ZnO/CdSSe nanotrees promising candidates for applications in solar cells, photocatalysis, and opto-electronic devices.

Figure 1 shows the growth mechanism of ZnO/CdSSe NTs. The procedure involved a catalytic vapor-liquid-solid (VLS) process followed by a non-catalytic vapor-solid (VS) growth. In the first VLS step, ZnO and C react in the Ar atmosphere, resulting in metallic Zn and carbon oxide. Zn is subsequently dissolved in the gold precursor on the sapphire substrate. ZnO nanowires grow from the dissolved Zn and residual oxygen. In the second step, exposure to air results in the growth...

Watch this Scientific Journal Video about Synthesis of Hierarchical ZnO/CdSSe Heterostructure Nanotrees at JoVE.com

Synthesis of Hierarchical ZnO/CdSSe Heterostructure Nanotrees

Here, we prepare and characterize novel tree-like hierarchical ZnO/CdSSe nanostructures, where CdSSe branches are grown on vertically aligned ZnO nanowires. The resulting nanotrees are a potential material for solar energy conversion and other opto-electronic devices.

A two-step chemical vapor deposition procedure is here employed to prepare tree-like hierarchical ZnO/CdSSe hetero-nanostructures. The structures are ...

The overall goal of this experiment is to synthesize a tree-like nanostructure with zinc oxide stems and cadmium sulphoselenide branches. And characterize its morphology, crystal structure, and optical properties. This method can help answer key questions in the application of nanocomposite materials in optical and electro-optical applications.The main advantage of this technique is that chemical vapor deposition is a simple and cost-effective way to produce tree-like nanostructures with well-defined interfaces. The cadmium sulphoselenide branches absorb visible light and form of type-II heterojunction with a zinc-oxide stem. The heterojunction facilitates efficient electric transfer from the branches to the stem.The optical properties indicate that the nano trees are promising materials for applications that benefit from a z-scheme charge transfer mechanism, like solar cells and other optoelectronic devices. Though this matter can provide insight into zinc-oxide cadmium sulphoselenide nanotrees, it can also be applied to other systems, such as nanowires, nanotubes, nanobots and so on. Generally, individuals new to this method will struggle because each parameter, such as emulsification, temperature and fluoride will affect the morphology of the nanotrees.First, clean a sapphire slide by sonication in 99.5%ethanol for five minutes. Then using a sputter coater, deposit a 10-nanometer thick gold film onto the slide. Next, stir one gram of a one-to-one mixture by mass of zinc oxide nanopowder and activated carbon into 10 milliliters of 99.5%ethanol.Sonicate the mixture in a water bath at 20 degrees Celsius for 30 minutes. This step insures that no air is present in the mixture. And zinc oxide and carbon are in close contact.Dry the sonicated mixture at 80 degrees Celsius for five hours. Then place the dry mixture in an alumina combustion boat and compact it with a spatula to exclude air from the mixture. Place a gold-coated slide on top of the combustion boat, gold-side down.Place the boat in the center of the quartz tube of a horizontal tube furnace. Then set the heating and cooling parameters on the furnace. Purge the tube with argon gas at a flow rate of 40 standard cubic centimeters per minute at room temperature for one hour.Then increase the temperature from room temperature to 900 degrees Celsius at 80 degrees Celsius per minute and remain at that temperature for two hours. Then, open the tube to air at both ends to provide oxygen for the reaction. Continue heating the sample at 900 degrees Celsius with the tube open to air for three hours.Cool the furnace down to room temperature at 10 degrees Celsius per minute and remove the boat and slide. The white film on the slide consists of the zinc oxide nanowires. Next, thoroughly mix 0.25 grams each of cadmium sulfide and cadmium selenide powder and place the mixture in another alumina combustion boat.Compact the mixture well. Place the zinc oxide nanowire-coated slide about 10 centimeters downstream from the boat. Place the boat in the center of the quartz furnace tube.On the slide, ensure that the zinc oxide nanowires face up. Again, set the parameters on the furnace. Purge the quartz tube of the furnace with argon gas at 40 standard cubic centimeters per minute at room temperature for one hour.Then heat the furnace to 820 degrees Celsius at 80 degrees Celsius per minute and hold the temperature at 820 degrees for 30 minutes. A different temperature will give rise to a different composition and morphology. Then cool the furnace down to room temperature at 10 degrees Celsius per minute and remove the boat and slide from the furnace.The zinc oxide cadmium sulphoselenide nanotrees are obtained as an orange-yellow film on the slide. Prepare control samples of zinc oxide and cadmium sulphoselenide nanowires on clean, gold-coated sapphire slides using the same procedures. Characterize the nanostructures with scanning electron microscopy, X-ray powder diffraction, and energy-dispersive X-ray spectroscopy.Obtain photoluminescence emission spectra and measure the time result photoluminescence and fluorescence decay lifetimes. cadmium sulphoselenide nanowires were grown by chemical vapor deposition on zinc oxide nanowires to form tree-like nanostructures. The stems were capped with cadmium sulphoselenide.The nanotrees showed X-ray diffraction peaks characteristic of both the pure zinc oxide nanowires and the pure cadmium sulphoselenide nanowires. An additional peak observed in the XRD spectrum is assigned to a different phase of cadmium sulphoselenide forming on point defects on the zinc oxide stem initiating branch growth. The mole percentage ratio of sulfur to selenium in the branches was determined from EDS and XRD to be about 54 to 46.The mole ratio affects the band gap of the branches and can be tuned by altering the branch growth temperature. The photoluminescence lifetime of the nanotrees was shorter than the lifetimes of the zinc oxide and cadmium sulphoselenide nanowires. This suggests that fast electronic transfer occurs across the interface of the nanostructure providing an alternate relaxation pathway.Once mastered, this technique can be done in eight hours if it is performed properly. Six hours for zinc oxide preparation and two hours for cadmium sulphoselenide growth. And don't forget that working with cadmium sulfur and cadmium selenide can be extremely hazardous.And precautions such as wearing gloves, lab coat, and closed shoes should always be taken while performing this procedure.

synthesis-of-hierarchical-znocdsse-heterostructure-nanotrees

Research

JoVE Journal

Chemistry

Synthesis of Immunotargeted Magneto-plasmonic Nanoclusters

Magnetic and plasmonic properties combined in a single nanoparticle provide a synergy that is advantageous in a number of biomedical applications including contrast enhancement in novel magnetomotive imaging modalities, simultaneous capture&#160;and detection of circulating tumor cells (CTCs),&#160;and multimodal molecular imaging combined with photothermal therapy of cancer cells. These applications have stimulated significant interest in development of protocols for synthesis of magneto-plasmonic nanoparticles with optical absorbance in the near-infrared (NIR) region and a strong magnetic moment. Here, we present a novel protocol for synthesis of such hybrid nanoparticles that is based on an oil-in-water microemulsion method. The unique feature of the protocol described herein is synthesis of magneto-plasmonic nanoparticles of various sizes from primary blocks which also have magneto-plasmonic characteristics. This approach yields nanoparticles with a high density of magnetic and plasmonic functionalities which are uniformly distributed throughout the nanoparticle volume. The hybrid nanoparticles can be easily functionalized by attaching antibodies through the Fc moiety leaving the Fab portion that is responsible for antigen binding available for targeting.

Here, we describe a protocol for synthesis of magneto-plasmonic nanoparticles with a strong magnetic moment and a strong near-infrared (NIR) absorbance. The protocol also includes antibody conjugation to the nanoparticles through the Fc moiety for various biomedical applications which require molecular specific targeting.

Magnetic and plasmonic properties combined in a single nanoparticle provide a synergy that is advantageous in a number of biomedical applications ...

Synthesis of Indoxyl-glycosides for Detection of Glycosidase Activities

Indoxyl glycosides proved to be valuable and versatile tools for monitoring glycosidase activities. Indoxyls are released by enzymatic hydrolysis and are rapidly oxidized, for example by atmospheric oxygen, to indigo type dyes. This reaction enables fast and easy screening in vivo without isolation or purification of enzymes, as well as rapid tests on agar plates or in solution (e.g., blue-white screening, micro-wells) and is used in biochemistry, histochemistry, bacteriology and molecular biology. Unfortunately the synthesis of such substrates proved to be difficult, due to various side reactions and the low reactivity of the indoxyl hydroxyl function. Especially for glucose type structures low yields were observed. Our novel approach employs indoxylic acid ester as key intermediates. Indoxylic acid esters with varied substitution patterns were prepared on scalable pathways. Phase transfer glycosylations with those acceptors and peracetylated glycosyl halides can be performed under common conditions in high yields. Ester cleavage and subsequent mild silver mediated glycosylation yields the peracetylated indoxyl glycosides in high yields. Finally deprotection is performed according to Zempl&#233;n.

Indoxyl glycosides are well-established and widely used tools for enzyme screening and enzyme activity monitoring. Especially for glucose type structures previous syntheses proved to be challenging and low yielding. Our novel approach employs indoxylic acid esters as precious intermediates to yield a considerable number of indoxyl glycosides in good yields.

Indoxyl glycosides proved to be valuable and versatile tools for monitoring glycosidase activities. Indoxyls are released by enzymatic hydrolysis and are ...

Synthesis and Characterization of Supramolecular Colloids

Control over colloidal assembly is of utmost importance for the development of functional colloidal materials with tailored structural and mechanical properties for applications in photonics, drug delivery and coating technology. Here we present a new family of colloidal building blocks, coined supramolecular colloids, whose self-assembly is controlled through surface-functionalization with a benzene-1,3,5-tricarboxamide (BTA) derived supramolecular moiety. Such BTAs interact via directional, strong, yet reversible hydrogen-bonds with other identical BTAs. Herein, a protocol is presented that describes how to couple these BTAs to colloids and how to quantify the number of coupling sites, which determines the multivalency of the supramolecular colloids. Light scattering measurements show that the refractive index of the colloids is almost matched with that of the solvent, which strongly reduces the van der Waals forces between the colloids. Before photo-activation, the colloids remain well dispersed, as the BTAs are equipped with a photo-labile group that blocks the formation of hydrogen-bonds. Controlled deprotection with UV-light activates the short-range hydrogen-bonds between the BTAs, which triggers the colloidal self-assembly. The evolution from the dispersed state to the clustered state is monitored by confocal microscopy. These results are further quantified by image analysis with simple routines using ImageJ and Matlab. This merger of supramolecular chemistry and colloidal science offers a direct route towards light- and thermo-responsive colloidal assembly encoded in the surface-grafted monolayer.

A protocol for the synthesis and characterization of colloids coated with supramolecular moieties is described. These supramolecular colloids undergo self-assembly upon the activation of the hydrogen-bonds between the surface-anchored molecules by UV-light.

Control over colloidal assembly is of utmost importance for the development of functional colloidal materials with tailored structural and mechanical ...

Hydroquinone Based Synthesis of Gold Nanorods

Gold nanorods are an important kind of nanoparticles characterized by peculiar plasmonic properties. Despite their widespread use in nanotechnology, the synthetic methods for the preparation of gold nanorods are still not fully optimized. In this paper we describe a new, highly efficient, two-step protocol based on the use of hydroquinone as a mild reducing agent. Our approach allows the preparation of nanorods with a good control of size and aspect ratio (AR) simply by varying the amount of hexadecyl trimethylammonium bromide (CTAB) and silver ions (Ag+) present in the "growth solution". By using this method, it is possible to markedly reduce the amount of CTAB, an expensive and cytotoxic reagent, necessary to obtain the elongated shape. Gold nanorods with an aspect ratio of about 3 can be obtained in the presence of just 50 mM of CTAB (versus 100 mM used in the standard protocol based on the use of ascorbic acid), while shorter gold nanorods are obtained using a concentration as low as 10 mM.

This paper describes a protocol for the synthesis of gold nanorods, based on the use of hydroquinone as reducing agent, plus the different mechanisms for controlling their size and aspect ratio.

Gold nanorods are an important kind of nanoparticles characterized by peculiar plasmonic properties. Despite their widespread use in nanotechnology, the ...

Synthesis and Mass Spectrometry Analysis of Oligo-peptoids

Peptoids are sequence-controlled peptide-mimicking oligomers consisting of N-alkylated glycine units. Among many potential applications, peptoids have been thought of as a type of molecular information storage. Mass spectrometry analysis has been considered the method of choice for sequencing peptoids. Peptoids can be synthesized via solid phase chemistry using a repeating two-step reaction cycle. Here we present a method to manually synthesize oligo-peptoids and to analyze the sequence of the peptoids using tandem mass spectrometry (MS/MS) techniques. The sample peptoid is a nonamer consisting of alternating N-(2-methyloxyethyl)glycine (Nme) and N-(2-phenylethyl)glycine (Npe), as well as an N-(2-aminoethyl)glycine (Nae) at the N-terminus. The sequence formula of the peptoid is Ac-Nae-(Npe-Nme)4-NH2, where Ac is the acetyl group. The synthesis takes place in a commercially available solid-phase reaction vessel. The rink amide resin is used as the solid support to yield the peptoid with an amide group at the C-terminus. The resulting peptoid product is subjected to sequence analysis using a triple-quadrupole mass spectrometer coupled to an electrospray ionization source. The MS/MS measurement produces a spectrum of fragment ions resulting from the dissociation of charged peptoid. The fragment ions are sorted out based on the values of their mass-to-charge ratio (m/z). The m/z values of the fragment ions are compared against the nominal masses of theoretically predicted fragment ions, according to the scheme of peptoid fragmentation. The analysis generates a fragmentation pattern of the charged peptoid. The fragmentation pattern is correlated to the monomer sequence of the neutral peptoid. In this regard, MS analysis reads out the sequence information of the peptoids.

A protocol is described for the manual synthesis of oligo-peptoids followed by sequence analysis by mass spectrometry.

Peptoids are sequence-controlled peptide-mimicking oligomers consisting of N-alkylated glycine units. Among many potential applications, peptoids have ...

Synthesis of Substrate-Bound Au Nanowires Via an Active Surface Growth Mechanism

Advancing synthetic capabilities is important for the development of nanoscience and nanotechnology. The synthesis of nanowires has always been a challenge, as it requires asymmetric growth of symmetric crystals. Here, we report a distinctive synthesis of substrate-bound Au nanowires. This template-free synthesis employs thiolated ligands and substrate adsorption to achieve the continuous asymmetric deposition of Au in solution at ambient conditions. The thiolated ligand prevented the Au deposition on the exposed surface of the seeds, so the Au deposition only occurs at the interface between the Au seeds and the substrate. The side of the newly deposited Au nanowires is immediately covered with the thiolated ligand, while the bottom facing the substrate remains ligand-free and active for the next round of Au deposition. We further demonstrate that this Au nanowire growth can be induced on various substrates, and different thiolated ligands can be used to regulate the surface chemistry of the nanowires. The diameter of the nanowires can also be controlled with mixed ligands, in which another &#34;bad&#34; ligand could turn on the lateral growth. With the understanding of the mechanism, Au nanowire-based nanostructures can be designed and synthesized.

We report a solution-based method to synthesize substrate-bound Au nanowires. By tuning the molecular ligands used during the synthesis, the Au nanowires can be grown from various substrates with different surface properties. Au nanowire-based nanostructures can also be synthesized by adjusting the reaction parameters.

Advancing synthetic capabilities is important for the development of nanoscience and nanotechnology. The synthesis of nanowires has always been a ...

Hierarchical and Programmable One-Pot Oligosaccharide Synthesis

This article presents a general experimental protocol for programmable one-pot oligosaccharide synthesis and demonstrates how to use Auto-CHO software for generating potential synthetic solutions. The programmable one-pot oligosaccharide synthesis approach is designed to empower fast oligosaccharide synthesis of large amounts using thioglycoside building blocks (BBLs) with the appropriate sequential order of relative reactivity values (RRVs). Auto-CHO is a cross-platform software with a graphical user interface that provides possible synthetic solutions for programmable one-pot oligosaccharide synthesis by searching a BBL library (containing about 150 validated and &#62;50,000 virtual BBLs) with accurately predicted RRVs by support vector regression. The algorithm for hierarchical one-pot synthesis has been implemented in Auto-CHO and uses fragments generated by one-pot reactions as new BBLs. In addition, Auto-CHO allows users to give feedback for virtual BBLs to keep valuable ones for further use. One-pot synthesis of stage-specific embryonic antigen 4 (SSEA-4), which is a pluripotent human embryonic stem cell marker, is demonstrated in this work.

This protocol demonstrates how to use the Auto-CHO software for hierarchical and programmable one-pot synthesis of oligosaccharides. It also describes the general procedure for RRV determination&#160;experiments and one-pot glycosylation of SSEA-4.

This article presents a general experimental protocol for programmable one-pot oligosaccharide synthesis and demonstrates how to use Auto-CHO software for ...

Gold Nanoparticle Synthesis

Gold nanoparticles (Au nanoparticles) that are ~12 nm in diameter were synthesized by rapidly injecting a solution of 150 mg (0.15 mmol) of tetrachloroauric acid in 3.0 g (3.7 mmol, 3.6 mL) of oleylamine (technical grade) and 3.0 mL of toluene into a boiling solution of 5.1 g (6.4 mmol, 8.7 mL) of oleylamine in 147 mL of toluene. While boiling and mixing the reaction solution for 2 hours, the color of the reaction mixture changed from clear, to light yellow, to light pink, and then slowly to dark red. The heat was then turned off, and the solution was allowed to gradually cool down to room temperature for 1 hour. The gold nanoparticles were then collected and separated from the solution using a centrifuge and washed three times; by vortexing and dispersing the gold nanoparticles in 10 mL portions of toluene, and then precipitating the gold nanoparticles by adding 40 mL portions of methanol and spinning them in a centrifuge. The solution was then decanted to remove any remaining byproducts and unreacted starting materials. Drying the gold nanoparticles in a vacuum environment produced a solid black pellet; which could be stored for long periods of time (up to one year) for later use, and then redissolved in organic solvents such as toluene.

A protocol for synthesizing ~12 nm diameter gold nanoparticles (Au nanoparticles) in an organic solvent is presented. The gold nanoparticles are capped with oleylamine ligands to prevent agglomeration. The gold nanoparticles are soluble in organic solvents such as toluene.

Gold nanoparticles (Au nanoparticles) that are ~12 nm in diameter were synthesized by rapidly injecting a solution of 150 mg (0.15 mmol) of ...

Construction of Cyclic Cell-Penetrating Peptides for Enhanced Penetration of Biological Barriers

Cancer has been a grand challenge in global health. However, the complex tumor microenvironment generally limits the access of therapeutics to deeper tumor cells, leading to tumor recurrence. To conquer the limited penetration of biological barriers, cell-penetrating peptides (CPPs) have been discovered with excellent membrane translocation ability and have emerged as useful molecular transporters for delivering various cargoes into cells. However, conventional linear CPPs generally show compromised proteolytic stability, which limits their permeability across biological barriers. Thus, the development of novel molecular transporters that can penetrate biological barriers and exhibit enhanced proteolytic stability is highly desired to promote drug delivery efficiency in biomedical applications. We have previously synthesized a panel of short cyclic CPPs with aromatic crosslinks, which exhibited superior permeability in cancer cells and tissues compared to their linear counterparts. Here, a concise protocol is described for the synthesis of the fluorescently labeled cyclic polyarginine R8 peptide and its linear counterpart, as well as key steps for investigating their cell permeability.

This protocol describes the synthesis of cyclic cell-penetrating peptides with aromatic cross-links and the evaluation of their permeability across biological barriers.

Cancer has been a grand challenge in global health. However, the complex tumor microenvironment generally limits the access of therapeutics to deeper ...

Versatile Technique to Produce a Hierarchical Design in Nanoporous Gold

The potential to generate variable pore sizes, simplistic surface modification, and a breadth of commercial uses in the fields of biosensors, actuators, drug loading and release, and the development of catalysts have unquestionably accelerated the usage of nanoporous gold (NPG)-based nanomaterials in research and development. This article describes the process of the generation of hierarchical bimodal nanoporous gold (hb-NPG) by employing a step-wise procedure involving electrochemical alloying, chemical dealloying techniques, and annealing to create both macro- and mesopores. This is done to improve the utility of NPG by creating a bicontinuous solid/void morphology. The area available for surface modification is enhanced by smaller pores, while molecular transport benefits from the network of larger pores. The bimodal architecture, which is the result of a series of fabrication steps, is visualized using scanning electron microscopy (SEM) as a network of pores that are less than 100 nm in size and connected by ligaments to larger pores that are several hundred nanometers in size. The electrochemically active surface area of the hb-NPG is assessed using cyclic voltammetry (CV), with a focus on the critical roles that both dealloying and annealing play in creating the necessary structure. The adsorption of different proteins is measured by solution depletion technique, revealing the better performance of hb-NPG in terms of protein loading. By changing the surface area to volume ratio, the created hb-NPG electrode offers tremendous potential for biosensor development. The manuscript discusses a scalable method to create hb-NPG surface structures, as they offer a large surface area for the immobilization of small molecules and improved transport pathways for faster reactions.

Nanoporous gold with a hierarchical and bimodal pore size distribution can be produced by combining electrochemical and chemical dealloying. The composition of the alloy can be monitored via EDS-SEM examination as the dealloying process advances. The material's loading capacity can be determined by studying protein adsorption onto the material.

The potential to generate variable pore sizes, simplistic surface modification, and a breadth of commercial uses in the fields of biosensors, actuators, ...