We would like to thank American University, the Faculty Research Support Grant, NASA DC Space Grant, and NSF-MRI#1625977.

1. Construction of carbon-fiber microelectrodes
<ol>
	<li>Preparation of carbon fibers
	<ol>
		<li>To create carbon-fiber microelectrodes, first separate the carbon fibers (carbon fiber,7 &#956;m in diameter) one by one using hands, gloves, and spatula.</li>
		<li>Pull or yank one fiber from the twisted yarn.</li>
		<li>Aspirate an isolated carbon fiber into a glass capillary (single-barrel borosilicate capillary glass without microfilament, 1.2 mm outer diameter, 0.68 mm inner diameter).</li>
		<li>Cr...

<ol>
	<li>Zestos, A. G., Nguyen, M. D., Poe, B. L., Jacobs, C. B., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Epoxy+insulated+carbon+fiber+and+carbon+nanotube+fiber+microelectrodes.">Epoxy insulated carbon fiber and carbon nanotube fiber microelectrodes.</a> Sensors and Actuators B: Chemical. 182, 652-658 (2013).</li><li>Bucher, E. S., Wightman, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemical+analysis+of+neurotransmitters.">Electrochemical analysis of neurotransmitters.</a> Annual review of analytical chemistry. 8, 239-261 (2015).</li><li>Zestos, A. G., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Communication&#8212;Carbon+Nanotube+Fiber+Microelectrodes+for+High+Temporal+Measurements+of+Dopamine.">Communication&#8212;Carbon Nanotube Fiber Microelectrodes for High Temporal Measurements of Dopamine.</a> Journal of The Electrochemical Society. 165, G3071-G3073 (2018).</li><li>Park, J., Takmakov, P., Wightman, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+comparison+of+norepinephrine+and+dopamine+release+in+rat+brain+by+simultaneous+measurements+with+fast-scan+cyclic+voltammetry.">In vivo comparison of norepinephrine and dopamine release in rat brain by simultaneous measurements with fast-scan cyclic voltammetry.</a> Journal of neurochemistry. 119, 932-944 (2011).</li><li>Abdalla, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+Vivo+Ambient+Serotonin+Measurements+at+Carbon-Fiber+Microelectrodes.">In Vivo Ambient Serotonin Measurements at Carbon-Fiber Microelectrodes.</a> Analytical chemistry. 89, 9703-9711 (2017).</li><li>Ganesana, M., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Early+changes+in+transient+adenosine+during+cerebral+ischemia+and+reperfusion+injury.">Early changes in transient adenosine during cerebral ischemia and reperfusion injury.</a> PloS one. 13, e0196932 (2018).</li><li>Denno, M. E., Privman, E., Borman, R. P., Wolin, D. C., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantification+of+histamine+and+carcinine+in+Drosophila+melanogaster+tissues.">Quantification of histamine and carcinine in Drosophila melanogaster tissues.</a> ACS chemical neuroscience. 7, 407-414 (2016).</li><li>Sanford, A. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Voltammetric+detection+of+hydrogen+peroxide+at+carbon+fiber+microelectrodes.">Voltammetric detection of hydrogen peroxide at carbon fiber microelectrodes.</a> Analytical chemistry. 82, 5205-5210 (2010).</li><li>Heien, M. L., Johnson, M. A., Wightman, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Resolving+neurotransmitters+detected+by+fast-scan+cyclic+voltammetry.">Resolving neurotransmitters detected by fast-scan cyclic voltammetry.</a> Analytical chemistry. 76, 5697-5704 (2004).</li><li>Raju, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polymer+modified+carbon+fiber-microelectrodes+and+waveform+modifications+enhance+neurotransmitter+metabolite+detection.">Polymer modified carbon fiber-microelectrodes and waveform modifications enhance neurotransmitter metabolite detection.</a> Analytical Methods. 11, 1620-1630 (2019).</li><li>Jacobs, C. B., Ivanov, I. N., Nguyen, M. D., Zestos, A. G., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+temporal+resolution+measurements+of+dopamine+with+carbon+nanotube+yarn+microelectrodes.">High temporal resolution measurements of dopamine with carbon nanotube yarn microelectrodes.</a> Analytical chemistry. 86, 5721-5727 (2014).</li><li>Zestos, A. G., Yang, C., Jacobs, C. B., Hensley, D., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbon+nanospikes+grown+on+metal+wires+as+microelectrode+sensors+for+dopamine.">Carbon nanospikes grown on metal wires as microelectrode sensors for dopamine.</a> Analyst. 140, 7283-7292 (2015).</li><li>Zestos, A. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbon+Nanoelectrodes+for+the+Electrochemical+Detection+of+Neurotransmitters.">Carbon Nanoelectrodes for the Electrochemical Detection of Neurotransmitters.</a> International Journal of Electrochemistry. , (2018).</li><li>Kim, J. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dopamine+neurons+derived+from+embryonic+stem+cells+function+in+an+animal+model+of+Parkinson's+disease.">Dopamine neurons derived from embryonic stem cells function in an animal model of Parkinson's disease.</a> Nature. 418, 50 (2002).</li><li>Zestos, A. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ruboxistaurin+Reduces+Cocaine-Stimulated+Increases+in+Extracellular+Dopamine+by+Modifying+Dopamine-Autoreceptor+Activity.">Ruboxistaurin Reduces Cocaine-Stimulated Increases in Extracellular Dopamine by Modifying Dopamine-Autoreceptor Activity.</a> ACS Chemical Neuroscience. 10, 1960-1969 (2019).</li><li>Zestos, A. G., Kennedy, R. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microdialysis+Coupled+with+LC-MS/MS+for+In+Vivo+Neurochemical+Monitoring.">Microdialysis Coupled with LC-MS/MS for In Vivo Neurochemical Monitoring.</a> The AAPS Journal. 19, 1284-1293 (2017).</li><li>Carpenter, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+and+systemic+administration+of+a+CNS-permeant+tamoxifen+analog+reduces+amphetamine-induced+dopamine+release+and+reinforcing+effects.">Direct and systemic administration of a CNS-permeant tamoxifen analog reduces amphetamine-induced dopamine release and reinforcing effects.</a> Neuropsychopharmacology. 42, 1940 (2017).</li><li>Zestos, A. G., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbon+Nanotube-Based+Microelectrodes+for+Enhanced+Neurochemical+Detection.">Carbon Nanotube-Based Microelectrodes for Enhanced Neurochemical Detection.</a> ECS Transactions. 80, 1497-1509 (2017).</li><li>Zachek, M. K., Hermans, A., Wightman, R. M., McCarty, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemical+Dopamine+Detection:+Comparing+Gold+and+Carbon+Fiber+Microelectrodes+using+Background+Subtracted+Fast+Scan+Cyclic+Voltammetry.">Electrochemical Dopamine Detection: Comparing Gold and Carbon Fiber Microelectrodes using Background Subtracted Fast Scan Cyclic Voltammetry.</a> J Electroanal Chem (Lausanne Switz). 614, 113-120 (2008).</li><li>Li, J., Xie, H., Chen, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+sensitive+hydrazine+electrochemical+sensor+based+on+electrodeposition+of+gold+nanoparticles+on+choline+film+modified+glassy+carbon+electrode.">A sensitive hydrazine electrochemical sensor based on electrodeposition of gold nanoparticles on choline film modified glassy carbon electrode.</a> Sensors and Actuators B: Chemical. 153, 239-245 (2011).</li><li>Hartings, M. R., Fox, D. M., Miller, A. E., Muratore, K. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+hybrid+integrated+laboratory+and+inquiry-based+research+experience:+replacing+traditional+laboratory+instruction+with+a+sustainable+student-led+research+project.">A hybrid integrated laboratory and inquiry-based research experience: replacing traditional laboratory instruction with a sustainable student-led research project.</a> Journal of Chemical Education. 92, 1016-1023 (2015).</li><li>Hart, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein-templated+gold+nanoparticle+synthesis:+protein+organization,+controlled+gold+sequestration,+and+unexpected+reaction+products.">Protein-templated gold nanoparticle synthesis: protein organization, controlled gold sequestration, and unexpected reaction products.</a> Dalton Transactions. 46, 16465-16473 (2017).</li><li>Hartings, M. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Concurrent+zero-dimensional+and+one-dimensional+biomineralization+of+gold+from+a+solution+of+Au3++and+bovine+serum+albumin.">Concurrent zero-dimensional and one-dimensional biomineralization of gold from a solution of Au3+ and bovine serum albumin.</a> Science and technology of advanced materials. 14, 065004 (2013).</li><li>Xiao, N., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid,+sensitive+detection+of+neurotransmitters+at+microelectrodes+modified+with+self-assembled+SWCNT+forests.">Rapid, sensitive detection of neurotransmitters at microelectrodes modified with self-assembled SWCNT forests.</a> Analytical chemistry. 84, 7816-7822 (2012).</li><li>Zestos, A. G., Jacobs, C. B., Trikantzopoulos, E., Ross, A. E., Venton, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polyethylenimine+Carbon+Nanotube+Fiber+Electrodes+for+Enhanced+Detection+of+Neurotransmitters.">Polyethylenimine Carbon Nanotube Fiber Electrodes for Enhanced Detection of Neurotransmitters.</a> Analytical chemistry. 86, 8568-8575 (2014).</li><li>Yang, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbon+nanotubes+grown+on+metal+microelectrodes+for+the+detection+of+dopamine.">Carbon nanotubes grown on metal microelectrodes for the detection of dopamine.</a> Analytical chemistry. 88, 645-652 (2015).</li></ol>

In this study, we demonstrate a novel method to construct gold-nanoparticle modified carbon fiber microelectrodes for the detection of neurotransmitters such as dopamine using fast scan cyclic voltammetry. The method is an efficient, green, and relatively inexpensive approach to enhancing the sensitivity of biomolecule detection. The thickness of gold deposited onto the surface of the carbon fiber can be controlled by the time of electrodeposition and the concentration of gold present in the electrodeposition solution. G...

Carbon-fiber microelectrodes (CFMEs)1 are best used as biosensors to detect the oxidation of several crucial neurotransmitters2, including dopamine3, norepinephrine4, serotonin5, adenosine6, histamine7, and others8. The biocompatibility and size of carbon fibers make them optimal for implantation as there is mitigated tissue damage compared to larger standard electrodes.9 CFMEs are known to possess useful electrochemical properties and are capable of making quick measurements when used with fast electrochemical techniques, most commonly fast-scan cyclic voltammetry (FSCV)10,11. FSCV is a technique that scans the applied potential rapidly and provides a specific cyclic voltammogram for specific analytes12,13. The large charging current produced by fast scanning is stable on carbon fibers and can be background-subtracted to produce specific cyclic voltammograms.
Due to its optimal electrochemistry and neurobiological importance, dopamine has been widely studied. The catecholamine dopamine is an essential chemical messenger that plays a pivotal role in the control of movement, memory, cognition, and emotion within the nervous system. A surplus or deficiency of dopamine can cause numerous neurological and psychological interference; among these are Parkinson&#8217;s disease, schizophrenia, and addictive behavior. Today, Parkinson&#8217;s disease continues to be a prevalent disorder due to the degeneration of midbrain neurons involved in dopamine synthesis14. Parkinson&#8217;s disease symptoms include tremor, slowness of movement, stiffness, and problems in maintaining balance. On the other hand, stimulants such as cocaine15&#160;and amphetamine16,17&#160;promote the overflow of dopamine. Drug abuse eventually substitutes the regular flow of dopamine and conditions the brain to require a surplus of dopamine, which eventually leads to addictive behaviors.
In recent years, there has been an emphasis on improving electrode functionality in neurotransmitter detection18. The most widespread method of enhancing electrode sensitivity is by coating the fiber surface. Surprisingly, there has been limited research done on metal nanoparticle electrodeposition onto carbon-fibers19. Noble metal-nanoparticles such as gold, may be electrodeposited onto the fiber surface with other functional materials20. For example, increasing the electroactive surface area for neurotransmitter adsorption to occur. Electrodeposited metal nanoparticles form rapidly, can be purified, and adhere to the carbon-fiber. Electrochemistry continues to be significant for both the deposition of noble metal nanoparticles and surface enhancement of carbon-fibers, as it allows for the control of nucleation and growth of these nanoparticles. Finally, the increased catalytic and conductive characteristics, and improved mass transport are among other advantages of utilizing metal nanoparticles for electroanalysis.
The Advanced Laboratory sequence course of American University (Experimental Biological Chemistry I and II CHEM 471/671-472/672) is a combination of Analytical, Physical, and Biochemistry laboratories. The first semester is an overview of laboratory techniques. The second semester is a student-driven and led research project21. For these projects, students have previously examined the mechanism of biomolecule, protein, peptide, and amino acid-facilitated synthesis of gold nanoparticles22,23. More recent work has focused on the formation of gold nanoparticle (AuNP) production on electrode surfaces and the evaluation of AuNPs effects on the ability of CFMEs to detect neurotransmitters. In the present work, the laboratory has applied this technique to demonstrate that the sensitivity of CFMEs in detecting the dopamine-oxidation is enhanced through the electrodeposition of AuNP onto the fiber surface. Each bare-CFME is characterized by varying scan-rate, stability and dopamine-concentration when detecting dopamine-oxidative currents to measure dopamine oxidation on the surface of the CFME. Au3+ was then electroreduced to Au0 and concurrently electrodeposited onto the fiber surface as nanoparticles, followed by a series of characterization experiments. After a direct comparison, the AuNP-CFMEs were found to possess higher sensitivity of dopamine detection. The uniform coating of AuNP onto the fiber surface via electrodeposition renders a higher electroactive surface area; thus, increasing the adsorption of dopamine onto the modified electrode surface. This led to higher dopamine oxidative currents. The potential separation of the dopamine oxidation and reduction peaks (&#8710;Ep) of AuNP-CFMEs was also smaller, suggesting faster electron transfer kinetics. Future works of this study includes the in vivo testing of both the bare- and AuNP-CFMEs for the detection of dopamine.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Dopamine hydrochloride</td>
			<td>Sigma Aldrich</td>
			<td>H8502-5G</td>
			<td></td>
		</tr>
		<tr>
			<td>Phosphate Buffered Saline</td>
			<td>Sigma Aldrich</td>
			<td>P5493-1L</td>
			<td></td>
		</tr>
		<tr>
			<td>Pine WaveNeuro Potentiostat</td>
			<td>Pine Instruments</td>
			<td>NEC-WN-BASIC</td>
			<td>This orders comes in bulk with all other accessories such as headstages, adapters, cords, and other electronics</td>
		</tr>
		<tr>
			<td>Pine Flow Cell and Micromanipulator</td>
			<td>Pine Instruments</td>
			<td>NEC-FLOW-1</td>
			<td>This is also another bulk order including the micromanipulator, flow cell, knobs, tubing, connectors, etc.</td>
		</tr>
		<tr>
			<td>Glass-Capillary</td>
			<td>A-M Systems</td>
			<td>602500</td>
			<td></td>
		</tr>
		<tr>
			<td>T-650 Carbon Fiber</td>
			<td>Goodfellow</td>
			<td>C 005711</td>
			<td></td>
		</tr>
		<tr>
			<td>Epon 828 Epoxy</td>
			<td>Miller-Stephenson</td>
			<td>EPON 828 TDS</td>
			<td></td>
		</tr>
		<tr>
			<td>Diethelynetriamine</td>
			<td>Sigma Aldrich</td>
			<td>D93856-5ML</td>
			<td></td>
		</tr>
		<tr>
			<td>Gold (III) chloride</td>
			<td>Sigma Aldrich</td>
			<td>254169</td>
			<td>Comes as either HAuCl4 or AuCl3</td>
		</tr>
		<tr>
			<td>pH meter</td>
			<td>Fisher</td>
			<td>S90528</td>
			<td></td>
		</tr>
		<tr>
			<td>Farraday Cage</td>
			<td>AMETEK TMC</td>
			<td>81-334-03</td>
			<td></td>
		</tr>
		<tr>
			<td>Syringe Pump</td>
			<td>NEW ERA PUMP</td>
			<td>NE-1000</td>
			<td></td>
		</tr>
		<tr>
			<td>Eppendorf Pipettes and Tips</td>
			<td>Eppendorf</td>
			<td>2231000222</td>
			<td>This is also a bulk order containing multiple pipettes and tips</td>
		</tr>
		<tr>
			<td>10 -1,000 mL beakers</td>
			<td>VWR</td>
			<td>10536-390</td>
			<td></td>
		</tr>
		<tr>
			<td>Carbon fiber</td>
			<td>Goodfellow</td>
			<td>C 005711</td>
			<td></td>
		</tr>
		<tr>
			<td>SEM</td>
			<td>JEOL</td>
			<td>JSM-IT100</td>
			<td></td>
		</tr>
	</tbody>
</table>

gold nanoparticle modified carbon fiber microelectrodes for enhanced neurochemical detection

For over 30 years, carbon-fiber microelectrodes (CFMEs) have been the standard for neurotransmitter detection. Generally, carbon fibers are aspirated into glass capillaries, pulled to a fine taper, and then sealed using an epoxy to create electrode materials that are used for fast scan cyclic voltammetry testing. The use of bare CFMEs has several limitations, though. First and foremost, the carbon fiber contains mostly basal plane carbon, which has a relatively low surface area and yields lower sensitivities than other nanomaterials. Furthermore, the graphitic carbon is limited by its temporal resolution, and its relatively low conductivity. Lastly, neurochemicals and macromolecules have been known to foul at the surface of carbon electrodes where they form non-conductive polymers that block further neurotransmitter adsorption. For this study, we modify CFMEs with gold nanoparticles to enhance neurochemical testing with fast scan cyclic voltammetry. Au3+ was electrodeposited or dipcoated from a colloidal solution onto the surface of CFMEs. Since gold is a stable and relatively inert metal, it is an ideal electrode material for analytical measurements of neurochemicals. Gold nanoparticle modified (AuNP-CFMEs) had a stability to dopamine response for over 4 h. Moreover, AuNP-CFMEs exhibit an increased sensitivity (higher peak oxidative current of the cyclic voltammograms) and faster electron transfer kinetics (lower &#916;EP or peak separation) than bare unmodified CFMEs. The development of AuNP-CFMEs provides the creation of novel electrochemical sensors for detecting fast changes in dopamine concentration and other neurochemicals at lower limits of detection. This work has vast applications for the enhancement of neurochemical measurements. The generation of gold nanoparticle modified CFMEs will be vitally important for the development of novel electrode sensors to detect neurotransmitters in vivo in rodent and other models to study neurochemical effects of drug abuse, depression, stroke, ischemia, and other behavioral and disease states.

For Figure 1, we show a schematic where FSCV testing is utilized to measure the concentration of neurotransmitters in vitro. Figure 1 displays the dopamine waveform applied. The triangle waveform scans from -0.4 V to 1.3 V at 400 V/s. In the second part of the figure to the left, it displays the oxidation of dopamine to dopamine-ortho-quinone (DOQ), a two electron transfer process occurs from the surface of the analyte to the sur...

Watch this Scientific Journal Video about Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection at JoVE.com

Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection

In this study, we modify carbon-fiber microelectrodes with gold nanoparticles to enhance the sensitivity of neurotransmitter detection.

For over 30 years, carbon-fiber microelectrodes (CFMEs) have been the standard for neurotransmitter detection. Generally, carbon fibers are aspirated into ...

The method is significant because it enables neurochemical detection with high spatial and temporal resolution which can potentially enhance in vivo methods of neurochemical detection. The main advantage of this technique is that it is a quick, easy and reproducible method to enhance the sensitivity and temporal resolution of neurotransmitter detection. Demonstrating the procedure will be Sanuja Mohanaraj and Pauline Wonnenberg, graduate students from my laboratory.To begin, separate carbon fiber material into individual strands and pull a single seven-micrometer diameter carbon fiber from a strand. Connect a vacuum line to a borosilicate glass capillary and aspirate the carbon fiber into the capillary. Then cut a 10-centimeter by 25-centimeter piece of cardboard to serve as an electrode holder.Tape a paper towel around the cardboard as a support, then insert the capillary into the electrode holder and carefully secure it in a vertical capillary puller. Configure the capillary puller to pull the glass capillary to a fine taper for electrode materials and start it. Once pulling finishes and the heating coil has cooled, cut the carbon fiber connecting the tube-pulled electrodes.Carefully remove the microelectrodes from the capillary puller. Guided by a stereoscope or microscope, use a sharp blade or surgical scissors to trim the protruding carbon fiber on each electrode to about 100 to 150 micrometers in length. Next, in a 25-milliliter vial, use a cotton swab to mix 10 grams of epoxy with 0.2 milliliters of hardener.Fill another vial with acetone. For each electrode, immerse the carbon fiber tip in epoxy for 15 seconds and then dip it in acetone for three seconds to remove excess epoxy. After epoxying, the epoxied electrodes are then cured in the oven for three hours at 125 degrees Celsius.Next, use a micromanipulator to place a carbon fiber microelectrode in a silver-silver-chloride reference electrode in a 0.5 millimolar solution of chloroauric acid in 0.1 molar aqueous potassium chloride. Connect the electrodes to a potentiostat with a carbon fiber microelectrode as the working electrode. Scan the electrode from 0.2 volts to minus one volt at 50 millivolts per second for 10 cycles to perform electrode deposition.It is critical to optimize the parameters for depositing the gold coating. Too much coating will cause noise and signal overload while too little coating will not enhance neurochemical detection. Before the test, prepare a 10-millimolar stock solution of dopamine in perchloric acid and about a liter of pH 7.4 PBS-based buffer in deionized water.Pipette one microliter of the dopamine stock solution into 10 milliliters of buffer to make an approximately one micromolar dopamine solution. Then connect a carbon fiber microelectrode and a silver-silver chloride reference electrode to a potentiostat. Fix the carbon fiber electrode and the reference electrode in the head stage of the flow cell apparatus and use the micromanipulator to lower them into the flow cell.Draw 60 milliliters of the PBS buffer into a syringe. Fill the flow cell with buffer, and mount the syringe in a syringe pump. Start flowing buffer through the flow cell at a rate of one milliliter per minute.Then configure the potentiostat to scan for minus 0.4 volts to 1.3 volts at 10 hertz and 400 volts per second. Briefly apply the waveform to the microelectrode, observe the oscilloscope, and adjust the gain to prevent overloading. Let the microelectrode equilibrate for 10 minutes in the buffer.Then draw the diluted dopamine solution into a syringe and connect it to the injection port of the flow cell. Set the total run time on the potentiostat to 30 seconds. Start recording the measurements, wait 10 seconds, and then inject 0.2 milliliters of dopamine solution into the flow cell.When the run finishes, process the data with high definition cyclic voltammetry analysis software. Let the microelectrode re-equilibrate for 10 minutes before performing another test. When the tests are finished, clean the flow cell by injecting three milliliters of water and three milliliters of air into the buffer and injection ports three times.Coated carbon fibers were imaged with scanning electron microscopy. The thickness and particle size of the gold nanoparticle coatings can be controlled by the electrode deposition time. 20 minutes of electrode deposition yielded a thick gold coating with sharp ridges while five minutes yielded a thin uniform gold coating.Gold nanoparticle coated carbon-fiber microelectrodes had significantly higher peak oxidative currents and faster electron transfer kinetics than unmodified electrodes. The gold nanoparticle coating had no significant effect on the stability of the electrode responses as demonstrated here in a solution of dopamine. Both bare and gold nanoparticle coated electrodes responded linearly to scan rate changes with a much greater magnitude of change in the gold-coated electrodes.This indicated that dopamine absorption could be controlled via the scan rate. Both bare and gold nanoparticle-coated electrodes responded linearly between dopamine concentrations of 100 nanomolar to 10 micromolar. An asymptotic curve was observed at higher concentrations, indicating that dopamine is supersaturated at the electrode surface.The ability to detect neurochemical changes on a faster time scale and at higher sensitivities will help answer complex questions in neuroscience. This method also has uses in analytical chemistry, metabolomics, and environmental science. While it is easy to learn, visual demonstration is critical for learning to make, modify, and test the microelectrodes.Future directions for this method include adjusting the deposition of gold and other coatings to account for thickness, size, shape, and morphology to optimize the detection of specific neurotransmitters. Researchers should practice handling small fibers under a microscope before trying this technique. Also, neurotransmitter stock solution should be prepared in a fume hood because they use 1 molar perchloric acid.

gold-nanoparticle-modified-carbon-fiber-microelectrodes-for-enhanced

Research

JoVE Journal

Chemistry

8.4K vues.  American University. La méthode est significative parce qu’elle permet la détection neurochimique avec la résolution spatiale et temporelle élevée qui peut potentiellement augmenter des méthodes in vivo de détection neurochimique. Le principal avantage de cette technique est qu’il s’agit d’une méthode rapide, facile et reproductible pour améliorer la sensibilité et la résolution temporelle de la détection des neurotransmetteurs. Sanuja Mohanaraj et Pauline Wonnenberg, étudiantes diplômées d...

Vidéo: Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection

In this study, we modify carbon-fiber microelectrodes with gold nanoparticles to enhance the sensitivity of neurotransmitter...

open-source toolkit: benchtop carbon fiber microelectrode array for nerve recording

Open-source Toolkit: Benchtop Carbon Fiber Microelectrode Array for Nerve Recording

Here, we describe fabrication methodology for customizable carbon fiber electrode arrays for recording in vivo in nerve and...

gold nanoparticle synthesis

Gold Nanoparticle Synthesis

A protocol for synthesizing ~12 nm diameter gold nanoparticles (Au nanoparticles) in an organic solvent is presented. The gold nanoparticles are capped with oleylamine ligands to prevent agglomeration. The gold nanoparticles are soluble in organic solvents such as...

regeneration of arrayed gold microelectrodes equipped for a real-time cell analyzer

Regeneration of Arrayed Gold Microelectrodes Equipped for a Real-Time Cell Analyzer

This protocol describes a general strategy to regenerate commercial arrayed gold microelectrodes equipped for a label-free cell analyzer aimed at saving on the high running costs ofmicrochip-based assays. The regeneration process includes trypsin digestion, rinsing with ethanol and water, and a spinning step, which enables repeated usage of...

electrochemical preparation of poly(3,4-ethylenedioxythiophene) layers on gold microelectrodes for uric acid-sensing applications

Electrochemical Preparation of Poly3,4-Ethylenedioxythiophene Layers on Gold Microelectrodes for Uric Acid-Sensing Applications

We describe aqueous and organic solvent systems for the electropolymerization of poly(3,4-ethylenedioxythiophene) to create thin layers on the surface of gold microelectrodes, which are used for sensing low molecular weight...

Electrochemical Preparation of Poly(3,4-Ethylenedioxythiophene) Layers on Gold Microelectrodes for Uric Acid-Sensing Applications

rapid nanoprobe signal enhancement by in situ gold nanoparticle synthesis

Rapid Nanoprobe Signal Enhancement by In Situ Gold Nanoparticle Synthesis

In this work, a protocol for signal enhancement of nanoprobe-based biosensing is presented. The protocol is based on the reduction of chloroauric acid onto the surface of existing nanoprobes that consist of gold, silver, silica or iron-oxide...

Rapid Nanoprobe Signal Enhancement by In Situ Gold Nanoparticle Synthesis

gold nanoparticle synthesis for mammalian cells using sapphire discs

Gold Nanoparticle Synthesis for Mammalian Cells Using Sapphire Discs  

construction and implementation of carbon fiber microelectrode arrays for chronic and acute in vivo recordings

Construction and Implementation of Carbon Fiber Microelectrode Arrays for Chronic and Acute In Vivo Recordings

This protocol describes a procedure for constructing carbon fiber microelectrode arrays for chronic and acute in vivo electrophysiological recordings in mouse (Mus musculus) and ferret (Mustela putorius furo) from multiple brain regions. Each step, following the purchase of raw carbon fibers to microelectrode array implantation, is described in detail, with emphasis on microelectrode array...

Construction and Implementation of Carbon Fiber Microelectrode Arrays for Chronic and Acute In Vivo Recordings

generation of hypoparathyroid rats via carbon-nanoparticle-assisted parathyroidectomy

Generation of Hypoparathyroid Rats via Carbon-Nanoparticle-Assisted Parathyroidectomy

An animal model of acquired hypoparathyroidism (HypoPT) is crucial to understanding how HypoPT affects mineral ion homeostasis and to verify the effectiveness of novel treatments. Here, a technique is presented to generate an acquired hypoparathyroidism (AHypoPT) rat model by parathyroidectomy (PTX) using carbon...

Generation of Hypoparathyroid Rats via Carbon-Nanoparticle-Assisted Parathyroidectomy

membraneless hydrogen peroxide fuel cells as a promising clean energy source

Author Spotlight: Design and Evaluation of Au-Electroplated Carbon Fiber Cloth Electrodes for Hydrogen Peroxide Fuel Cells 

This protocol introduces the design and evaluation of innovative three-dimensional electrodes for hydrogen peroxide fuel cells, utilizing Au-electroplated carbon fiber cloth and Ni-foam electrodes. The research findings highlight hydrogen peroxide's potential as a promising candidate for sustainable energy...

Exploring Innovative 3D Electrodes for Hydrogen Peroxide Fuel Cells

https://cloudfront.jove.com/CDNSource/teasers/65920_b.jpg

a method for selecting structure-switching aptamers applied to a colorimetric gold nanoparticle assay

A Method for Selecting Structure-switching Aptamers Applied to a Colorimetric Gold Nanoparticle Assay

A protocol is provided to select structure-switching aptamers for small molecule targets based on a tunable stringency magnetic bead selection method. Aptamers selected with structure-switching properties are beneficial for assays that require a conformational change to signal the presence of a target, such as the described gold nanoparticle...

transport of surface-modified carbon nanotubes through a soil column

Transport of Surface-modified Carbon Nanotubes through a Soil Column

Surface properties of a nanoparticle are important for their interaction with the surrounding medium. Therefore the surface modification of carbon nanotubes can be critical for their transport and retention through porous media. Here, lab scale column experiments are used to understand the possible transport and retention of these nanoparticles.

synthesis, assembly, and characterization of monolayer protected gold nanoparticle films for protein monolayer electrochemistry

Synthesis, Assembly, and Characterization of Monolayer Protected Gold Nanoparticle Films for Protein Monolayer Electrochemistry

Alkanethiolate stabilized gold colloids known as monolayer protected clusters (MPCs) are synthesized, characterized, and assembled into thin films as an adsorption interface for protein monolayer electrochemistry of simple redox protein like Pseudomonas aeruginosa azurin (AZ) and cytochrome c (cyt...

design and development of aptamer&#8211;gold nanoparticle based colorimetric assays for in-the-field applications

Design and Development of Aptamer&#8211;Gold Nanoparticle Based Colorimetric Assays for In-the-field Applications

The design and development of an aptamer&#8211;gold nanoparticle colorimetric assay for the detection of small molecules for in-the-field applications was examined. Additionally, a smart-device colorimetric application (app) was validated and long-term storage of the assay was established for use in the...

bioinspired soft robot with incorporated microelectrodes

Bioinspired Soft Robot with Incorporated Microelectrodes

A bioinspired scaffold is fabricated by a soft photolithography technique using mechanically robust and electrically conductive hydrogels. The micropatterned hydrogels provide directional cardiomyocyte cell alignment, resulting in a tailored direction of actuation. Flexible microelectrodes are also integrated into the scaffold to bring electrical controllability for a self-actuating cardiac...

utilization of plasmonic and photonic crystal nanostructures for enhanced micro- and nanoparticle manipulation

Utilization of Plasmonic and Photonic Crystal Nanostructures for Enhanced Micro- and Nanoparticle Manipulation

Plasmonic tweezers and photonic crystal nanostructures are shown to produce useful enhancements in the efficiency and orientation control of optically trapping micro- and...

fabrication and characterization of griffithsin-modified fiber scaffolds for prevention of sexually transmitted infections

Fabrication and Characterization of Griffithsin-modified Fiber Scaffolds for Prevention of Sexually Transmitted Infections

This manuscript describes the procedure to fabricate and characterize Griffithsin-modified poly(lactic-co-glycolic acid) electrospun fibers that demonstrate potent adhesive and antiviral activity against human immunodeficiency virus type 1 infection in vitro. Methods used to synthesize, surface-modify, and characterize the resulting morphology, conjugation, and desorption of Griffithsin from surface-modified fibers are...

dna coating of gold nanoparticle (aunp) for dna origami nanoantenna (dona)

DNA Coating of Gold Nanoparticle (AuNP) for DNA Origami Nanoantenna (DONA)  

manufacturing au-electroplated carbon fiber cloth electrode for hydrogen peroxide fuel cells

Manufacturing Au-Electroplated Carbon Fiber Cloth Electrode for Hydrogen Peroxide Fuel Cells

turkevich synthesis method of citrate-capped gold nanoparticle seeds for element synthesis

Turkevich Synthesis Method of Citrate-Capped Gold Nanoparticle Seeds for Element Synthesis

Carbon nanotubes (CNTs) are widely manufactured nanoparticles, which are being utilized in a number of consumer products, such as sporting goods, electronics and biomedical applications. Due to their accelerating production and use, CNTs constitute a potential environmental risk if they are released to soil and groundwater systems. It is therefore essential to improve the current understanding of environmental fate and transport of CNTs. The transport and retention of CNTs in both natural and artificial media have been reported in literature, but the findings widely vary and are thus not conclusive. There are a number of physical and chemical parameters responsible for variation in retention and transport. In this study, a complete procedure of selected multiwalled carbon nanotubes (MWCNTs) is presented starting from their surface modification to a complete set of laboratory column experiments at critical physical and chemical scenarios. Results indicate that the stability of the commercially available MWCNTs are critical with their attached surface functional group which can also influence the transport and retention of MWCNT through the surrounding medium.

Surface properties of a nanoparticle are important for their interaction with the surrounding medium. Therefore the surface modification of carbon nanotubes can be critical for their transport and retention through porous media. Here, lab scale column experiments are used to understand the possible transport and retention of these nanoparticles.

Carbon nanotubes (CNTs) are widely manufactured nanoparticles, which are being utilized in a number of consumer products, such as sporting goods, ...

A Filter-based Surface Enhanced Raman Spectroscopic Assay for Rapid Detection of Chemical Contaminants

We demonstrate a method to fabricate highly sensitive surface-enhanced Raman spectroscopic (SERS) substrates using a filter syringe system that can be applied to the detection of various chemical contaminants. Silver nanoparticles (Ag NPs) are synthesized via reduction of silver nitrate by sodium citrate. Then the NPs are aggregated by sodium chloride to form nanoclusters that could be trapped in the pores of the filter membrane. A syringe is connected to the filter holder, with a filter membrane inside. By loading the nanoclusters into the syringe and passing through the membrane, the liquid goes through the membrane but not the nanoclusters, forming a SERS-active membrane. When testing the analyte, the liquid sample is loaded into the syringe and flowed through the Ag NPs coated membrane. The analyte binds and concentrates on the Ag NPs coated membrane. Then the membrane is detached from the filter holder, air dried and measured by a Raman instrument. Here we present the study of the volume effect of Ag NPs and sample on the detection sensitivity as well as the detection of 10 ppb ferbam and 1 ppm ampicillin using the developed assay.

A procedure for fabrication and performing the filter-based surface enhanced Raman spectroscopic (SERS) assay for the detection of chemical contaminants (i.e., pesticide ferbam and antibiotic ampicillin) is presented.

We demonstrate a method to fabricate highly sensitive surface-enhanced Raman spectroscopic (SERS) substrates using a filter syringe system that can be ...

Hydroquinone Based Synthesis of Gold Nanorods

Gold nanorods are an important kind of nanoparticles characterized by peculiar plasmonic properties. Despite their widespread use in nanotechnology, the synthetic methods for the preparation of gold nanorods are still not fully optimized. In this paper we describe a new, highly efficient, two-step protocol based on the use of hydroquinone as a mild reducing agent. Our approach allows the preparation of nanorods with a good control of size and aspect ratio (AR) simply by varying the amount of hexadecyl trimethylammonium bromide (CTAB) and silver ions (Ag+) present in the "growth solution". By using this method, it is possible to markedly reduce the amount of CTAB, an expensive and cytotoxic reagent, necessary to obtain the elongated shape. Gold nanorods with an aspect ratio of about 3 can be obtained in the presence of just 50 mM of CTAB (versus 100 mM used in the standard protocol based on the use of ascorbic acid), while shorter gold nanorods are obtained using a concentration as low as 10 mM.

This paper describes a protocol for the synthesis of gold nanorods, based on the use of hydroquinone as reducing agent, plus the different mechanisms for controlling their size and aspect ratio.

Gold nanorods are an important kind of nanoparticles characterized by peculiar plasmonic properties. Despite their widespread use in nanotechnology, the ...

Liquid-cell Transmission Electron Microscopy for Tracking Self-assembly of Nanoparticles

Drying a nanoparticle dispersion is a versatile way to create self-assembled structures of nanoparticles, but the mechanism of this process is not fully understood. We have traced the trajectories of individual nanoparticles using liquid-cell transmission electron microscopy (TEM) to investigate the mechanism of the assembly process. Herein, we present the protocols used for liquid-cell TEM studies of the self-assembly mechanism. First, we introduce the detailed synthetic protocols used to produce uniformly sized platinum and lead selenide nanoparticles. Next, we present the microfabrication processes used to produce liquid cells with silicon nitride or silicon windows and then describe the loading and imaging procedures of the liquid-cell TEM technique. Several notes are included to provide helpful tips for the entire process, including how to manage the fragile cell windows. The individual motions of nanoparticles tracked by liquid-cell TEM revealed that changes in the solvent boundaries caused by evaporation affected the self-assembly process of nanoparticles. The solvent boundaries drove nanoparticles to primarily form amorphous aggregates, followed by flattening of the aggregates to produce a 2-dimensional (2D) self-assembled structure. These behaviors are also observed for different nanoparticle types and different liquid-cell compositions.

Here we introduce experimental protocols for the real-time observation of a self-assembly process using liquid-cell transmission electron microscopy.

Drying a nanoparticle dispersion is a versatile way to create self-assembled structures of nanoparticles, but the mechanism of this process is not fully ...

Extraction of Ramie Fiber in Alkali Hydrogen Peroxide System Supported by Controlled-release Alkali Source

This protocol demonstrates a method for ramie fiber extraction by scouring raw ramie in an alkali hydrogen peroxide system supported by a controlled-release alkali source. The fiber extracted from ramie is a type of textile material of great importance. In previous studies, ramie fiber was extracted in an alkali hydrogen peroxide system supported only by sodium hydroxide.However, due to the strong alkalinity of sodium hydroxide, the oxidation reaction speed of hydrogen peroxide was difficult to control and thus resulted in great damage to the treated fiber. In this protocol, a controlled-release alkali source, which is composed of sodium hydroxide and magnesium hydroxide, is used to provide an alkali condition and buffer the pH value of the alkali hydrogen peroxidesystem. The substitution rate of magnesium hydroxide can adjust the pH value of the hydrogen peroxide system and has great influence on the fiber properties. The pH value and oxidation-reduction potential (ORP) value, which represents the oxidation ability of alkali hydrogen peroxide system, were monitored using a pH meter and ORP meter, respectively. The residual hydrogen peroxide content in the alkali hydrogen peroxide system during the extraction process and the chemical oxygen demand (COD) value of wastewater after fiber extraction are tested by KMnO4 titration method. The yield of fiber is measured using a precision electronic balance, and residual gums of fiber are tested by a chemical analysis method. The polymerization degree (PD value) of fiber is tested by an intrinsic viscosity method using the Ubbelohde viscometer. The tensile property of fiber, including tenacity, elongation, and rupture, is measured using a fiber strength instrument. Fourier transform infrared spectroscopy and X-ray diffraction are used to characterize the functional groups and crystal property of fiber. This protocol proves that the controlled-release alkali source can improve the properties of the fiber extracted in an alkali hydrogen peroxide system.

Presented here is a protocol for extraction of ramie fiber in alkali hydrogen peroxide system supported by controlled-release alkali source.

This protocol demonstrates a method for ramie fiber extraction by scouring raw ramie in an alkali hydrogen peroxide system supported by a ...

Electrochemical Impedance Spectroscopy as a Tool for Electrochemical Rate Constant Estimation

Electrochemical impedance spectroscopy (EIS) was used for advanced characterization of organic electroactive compounds along with cyclic voltammetry (CV). In the case of fast reversible electrochemical processes, current is predominantly affected by the rate of diffusion, which is the slowest and limiting stage. EIS is a powerful technique that allows separate analysis of stages of charge transfer that have different AC frequency response. The capability of the method was used to extract the value of charge transfer resistance, which characterizes the rate of charge exchange on the electrode-solution interface. The application of this technique is broad, from biochemistry up to organic electronics. In this work, we are presenting the method of analysis of organic compounds for optoelectronic applications.

Electrochemical impedance spectroscopy (EIS) of species that undergo reversible oxidation or reduction in solution was used for determination of rate constants of oxidation or reduction.

Electrochemical impedance spectroscopy (EIS) was used for advanced characterization of organic electroactive compounds along with cyclic voltammetry (CV). ...

The use of nanoprobes such as gold, silver, silica or iron-oxide nanoparticles as detection reagents in bioanalytical assays can enable high sensitivity and convenient colorimetric readout. However, high densities of nanoparticles are typically needed for detection. The available synthesis-based enhancement protocols are either limited to gold and silver nanoparticles or rely on precise enzymatic control and optimization. Here, we present a protocol to enhance the colorimetric readout of gold, silver, silica, and iron oxide nanoprobes. It was observed that the colorimetric signal can be improved by up to a 10000-fold factor. The basis for such signal enhancement strategies is the chemical reduction of Au3+ to Au0. There are several chemical reactions that enable the reduction of Au3+ to Au0. In the protocol, Good&#39;s buffers and H2O2 are used and it is possible to favor the deposition of Au0 onto the surface of existing nanoprobes, in detriment of the formation of new gold nanoparticles. The protocol consists of the incubation of the microarray with a solution consisting of chloroauric acid and H2O2 in 2-(N-morpholino)ethanesulfonic acid pH 6 buffer following the nanoprobe-based detection assay. The enhancement solution can be applied to paper and glass-based sensors. Moreover, it can be used in commercially available immunoassays as demonstrated by the application of the method to a commercial allergen microarray. The signal development requires less than 5 min of incubation with the enhancement solution and the readout can be assessed by naked eye or low-end image acquisition devices such as a table-top scanner or a digital camera.

In this work, a protocol for signal enhancement of nanoprobe-based biosensing is presented. The protocol is based on the reduction of chloroauric acid onto the surface of existing nanoprobes that consist of gold, silver, silica or iron-oxide nanoparticles.

The use of nanoprobes such as gold, silver, silica or iron-oxide nanoparticles as detection reagents in bioanalytical assays can enable high sensitivity ...

Synthesis of Aptamer-PEI-g-PEG Modified Gold Nanoparticles Loaded with Doxorubicin for Targeted Drug Delivery

Due to drug resistance and toxicity in healthy cells, use of doxorubicin (DOX) has been limited in clinical cancer therapy. This protocol describes the designing of poly(ethylenimine) grafted with polyethylene glycol (PEI-g-PEG) copolymer functionalized gold nanoparticles (AuNPs) with loaded aptamer (AS1411) and DOX through amide reactions. AS1411 is specifically bonded with targeted nucleolin receptors on cancer cells so that DOX targets cancer cells instead of healthy cells. First, PEG is carboxylated, then grafted to branched PEI to obtain a PEI-g-PEG copolymer, which is confirmed by 1H NMR analysis. Next, PEI-g-PEG copolymer coated gold nanoparticles (PEI-g-PEG@AuNPs) are synthesized, and DOX and AS1411 are covalently bonded to AuNPs gradually via amide reactions. The diameter of the prepared AS1411-g-DOX-g-PEI-g-PEG@AuNPs is ~39.9 nm, with a zeta potential of -29.3 mV, indicating that the nanoparticles are stable in water and cell medium. Cell cytotoxicity assays show that the newly designed DOX loaded AuNPs are able to kill cancer cells (A549). This synthesis demonstrates the delicate arrangement of PEI-g-PEG copolymers, aptamers, and DOX on AuNPs that are achieved by sequential amide reactions. Such aptamer-PEI-g-PEG functionalized AuNPs provide a promising platform for targeted drug delivery in cancer therapy.

In this protocol, doxorubicin-loaded AS1411-g-PEI-g-PEG modified gold nanoparticles are synthesized via three-step amide reactions. Then, doxorubicin is loaded and delivered to target cancer cells for cancer therapy.

Due to drug resistance and toxicity in healthy cells, use of doxorubicin (DOX) has been limited in clinical cancer therapy. This protocol describes the ...

Quantitative SERS Detection of Uric Acid via Formation of Precise Plasmonic Nanojunctions within Aggregates of Gold Nanoparticles and Cucurbit[n]uril

This work describes a rapid and highly sensitive method for the quantitative detection of an important biomarker, uric acid (UA), via surface-enhanced Raman spectroscopy (SERS) with a low detection limit of ~0.2 &#956;M for multiple characteristic peaks in the fingerprint region, using a modular spectrometer. This biosensing scheme is mediated by the host-guest complexation between a macrocycle, cucurbit[7]uril (CB7), and UA, and the subsequent formation of precise plasmonic nanojunctions within the self-assembled Au NP: CB7 nanoaggregates. A facile Au NP synthesis of desirable sizes for SERS substrates has also been performed based on the classical citrate-reduction approach with an option to be facilitated using a lab-built automated synthesizer. This protocol can be readily extended to multiplexed detection of biomarkers in body fluids for clinical applications.

Quantitative SERS Detection of Uric Acid via Formation of Precise Plasmonic Nanojunctions within Aggregates of Gold Nanoparticles and Cucurbit[n]uril

A host-guest complex of cucurbit[7]uril and uric acid was formed in an aqueous solution before adding a small amount into Au NP solution for quantitative surface-enhanced Raman spectroscopy (SERS) sensing using a modular spectrometer.

This work describes a rapid and highly sensitive method for the quantitative detection of an important biomarker, uric acid (UA), via surface-enhanced ...

Nanoparticle Tracking Analysis of Gold Nanoparticles in Aqueous Media through an Inter-Laboratory Comparison

In the field of nanotechnology, analytical characterization plays a vital role in understanding the behavior and toxicity of nanomaterials (NMs). Characterization needs to be thorough and the technique chosen should be well-suited to the property to be determined, the material being analyzed and the medium in which it is present. Furthermore, the instrument operation and methodology need to be well-developed and clearly understood by the user to avoid data collection errors. Any discrepancies in the applied method or procedure can lead to differences and poor reproducibility of obtained data. This paper aims to clarify the method to measure the hydrodynamic diameter of gold nanoparticles by means of Nanoparticle Tracking Analysis (NTA). This study was carried out as an inter-laboratory comparison (ILC) amongst seven different laboratories to validate the standard operating procedure&#8217;s performance and reproducibility. The results obtained from this ILC study reveal the importance and benefits of detailed standard operating procedures (SOPs), best practice updates, user knowledge, and measurement automation.

The protocol described here aims to measure the hydrodynamic diameter of spherical nanoparticles, more specifically gold nanoparticles, in aqueous media by means of Nanoparticle Tracking Analysis (NTA). The latter involves tracking the movement of particles due to Brownian motion and implementing the Stokes-Einstein equation to obtain the hydrodynamic diameter.