This work was supported by an NSF Grant (2152065) and an NSF CAREER Award (1846857). The authors would like to thank all current and past members of the Wachs Lab for contributing to this protocol. Diagrams in Figure 1 were made in Biorender.

DRG harvest was performed in compliance with the Institutional Animal Care and Use Committee (IACUC) at the University of Nebraska-Lincoln. Female Sprague Dawley rats aged 12 weeks (~250 g) were used for the study. The details of the animals, reagents, and equipment used in the study are listed in the Table of Materials.
1. Multi-compartment device fabrication and assembly
<ol>
	<li>Computer-aided design and 3D printing of the multi-compartment device 
	NOTE: The MC device consists of three compartments for the isolation of DRG cell bodies and neurites (Figure 2A). The MC device is not commercially available; however, the STL file is provided herein (Supplementary Coding File 1) to enable 3D printing. Printing the MC takes one (1) day to complete.</li>
	<li>Upload the STL file of the MC to a Resin 3D printer using compatible software. 
	NOTE: The material ideal for printing is a high-temperature resin. A key advantage of using high-temperature resin is it is biocompatible and can be autoclaved and reused. A Digital light processing (DLP) 3D printer or other 3D printers could also be used to print the device.</li>
	<li>Transfer the printed devices into a washing solution for 30 min in isopropanol (&#62;96%) to remove residual resin from the surface of the printed MC device.</li>
	<li>Post-cure the devices at 80 &#176;C for 120 min using a commercially available curing agent (see Table of Materials). The curing agent enhances the mechanical properties of the printed MC device by exposing it to temperature and UV.</li>
	<li>Cure the MC devices thermally in an oven at 160 &#176;C for 180 min.</li>
	<li>Sterilize the devices using an autoclave for 45 min on a gravity cycle.</li>
</ol>
2. Hydrogel preparation
<ol>
	<li>Synthesize methacrylated hyaluronic acid (MAHA, 85%-115% methacrylation) and characterize using a protocol described by Seidlits et al.20. 
	NOTE: To support the growth of DRGs, triple hydrogels composed of methacrylated hyaluronic acid, type I collagen, and laminin are commonly used. Findings indicate that DRGs commonly grow in MAHA, ranging from 1.25-2.5 mg/mL and collagen from 2.0-4.5 mg/mL. For laminin, it is found that 0.75 mg/mL is enough to ensure robust growth of DRGs. Herein, methods to create a triple gel with 1.25 mg/mL MAHA, 4.5 mg/mL collagen, and 0.75 mg/mL laminin are detailed. Hydrogel preparation should be done in a laminar flow cabinet to provide an aseptic workspace.</li>
</ol>
3. Photoinitiator solution preparation
NOTE: A photoinitiator is necessary to crosslink the MAHA under UV light. It is commonly used at percentages from 0.3% to 0.6%.
<ol>
	<li>Prepare the photoinitiator solution 3 days prior to the DRG harvest.</li>
	<li>Pre-heat the sonicating water bath to 37 &#176;C before preparing the photoinitiator solution.</li>
	<li>Working with the sterile technique in a flow hood, prepare 23.125 mg/mL sodium bicarbonate (NaHCO3) solution by dissolving NaHCO3 in 5x Dulbecco&#39;s Modified Eagle Medium (DMEM)-HEPES solution.</li>
	<li>In a glass vial, mix 0.6% weight/volume (w/v) photoinitiator in a 20% vol/vol 1x sterile phosphate-buffered saline (PBS) and 80% vol/vol 5X DMEM/HEPES solution.</li>
	<li>To protect from light, wrap the glass vial in aluminum foil. However, ensure to remove the aluminum foil before transferring the vial to the sonicating water bath heated to 37 &#176;C with sonication between 30-40 min. 
	NOTE: Photoinitiator solution must be protected from light because it can break down into radicals and start the polymerization process when exposed to light21.</li>
	<li>Sterile filter the solution with a 0.22 &#181;m syringe filter into a new sterile glass vial.</li>
</ol>
4. Methacrylated hyaluronic acid dissolution
<ol>
	<li>Dissolve the methacrylated hyaluronic acid (prepared in step 2) on the same day the photoinitiator solution is prepared (step 3).</li>
	<li>Place the frozen lyophilized MAHA in a desiccator for 15 min to come to room temperature.</li>
	<li>Working in a laminar flow hood and using the sterile weighing technique, weigh the lyophilized MAHA in a glass vial.</li>
	<li>Add the necessary volume of filtered photoinitiator solution to MAHA to come to the desired MAHA concentration. The common final gel concentration is 1.25 mg/mL MAHA and 4.5 mg/mL collagen.</li>
	<li>Seal the cap with laboratory sealing film, wrap the glass vial with aluminum foil, and place it on an orbital shaker plate at room temperature until fully dissolved (usually 3 days). Occasionally, vortex the solution to break apart large clumps of MAHA to ensure uniform dissolution of MAHA.</li>
</ol>
5. Device assembly
<ol>
	<li>Place the MC device into a 48-well plate a day before the DRG harvest.</li>
	<li>Apply a thin line of silicone gel in the groove beneath the MC device (Figure 2B) using a 3 mL syringe. This will help the device to securely attach to the well plate.</li>
	<li>With the help of #3 forceps, gently place the MC device into the well of a 48-well plate, as shown in Figure 2C. 
	NOTE: The size of the device can be modified to suit the intended application, and a plate of a different size can be used if desired. The devices can be reused. To reuse, the hydrogel must be gently washed out from all tunnels, and the loading groove beneath the device must be used with 70% ethanol with gentle agitation. After this is complete, devices can be re-autoclaved to sterilize prior to use.</li>
</ol>
6. Animal preparation
<ol>
	<li>Autoclave all the necessary dissection tools prior to the start of harvest.</li>
	<li>Obtain an adult male or female Sprague Dawley rat aged 12-20 weeks. The sex of the rat does not impact DRG growth.</li>
	<li>Euthanize the rat according to the approved IACUC protocol using CO2 overdose as the primary method of euthanasia and bilateral pneumothorax puncture as a secondary method of euthanasia according to American Veterinary Medical Association Guidelines22.</li>
	<li>Place the rat on a sterile underpad on a dissecting table with the ventral side down. Spray the fur down with 70% ethanol.</li>
</ol>
7. Dorsal root ganglia (DRG) harvest
<ol>
	<li>Prepare trimming media containing 86% Neurobasal A media, 10% fetal bovine serum (FBS), 1% penicillin-streptomycin (PS), 1% Glutamine, and 2% B27 plus 50x and transfer into a 24-well plate. This media and well-plate will be used for temporary storage of harvested DRGs prior to embedding them in the hydrogel.</li>
	<li>Wear a lab coat, surgical mask, bonnet, safety glasses, and gloves.</li>
	<li>Using large blunt-nose scissors, cut through the skin at the base of the cervical spine and then down the length of the spine.</li>
	<li>To further drain blood away from the spinal canal, cut underneath the shoulder blades and down through the muscle to sever major blood vessels.</li>
	<li>Use large, sharp-nose scissors to cut the muscle away from the spine. Clear as much muscle as possible to visualize the spine.</li>
	<li>Remove the dorsal and lateral segments of the vertebrae. Use a straight Rongeur and sharp-nosed scissors to remove the spinous and transverse processes of the vertebrae, starting at the cervical end and moving toward the lumbar end.</li>
	<li>Remove the spinal cord. Use small sharp-nose scissors to carefully cut through the nerve roots connected to the DRGs along both sides of the spinal cord. Cut the cervical end of the spinal cord and carefully lift out of the spinal canal gradually, cutting through any remaining nerve roots connected to the DRGs. 
	NOTE: Fine motor skills are essential to ensure the DRG body is not severed in the process.</li>
	<li>To expose DRGs, use the curved Rongeur to remove more of the lateral parts of the vertebrae. Pull outward from the midline, alternating sides. Be careful not to cut through the DRG body since it may cause damage to the cell bodies and axons.</li>
	<li>Using the #3 forceps and straight-edge spring scissors, remove DRGs in between each level of the vertebrae. Grip the spinal nerve roots from the DRG, carefully pull them out of the pocket, and cut through the other end of the spinal nerve. Be careful not to grip the DRG body directly.</li>
	<li>Place the DRGs in wells of a 24-well plate (containing trimming media, step 7.1) on ice.</li>
	<li>After collecting all DRGs, clean up the workspace, place the carcass in an autoclave bag, and store/dispose of it appropriately according to IACUC protocol.</li>
</ol>
8. DRG trimming and cutting
<ol>
	<li>Fill a 60 mm Petri dish on a clean bench with trimming media (step 7.1). Set up the dissecting scope and glass bead sterilizer and place an autoclaved toolbox with trimming tools (#3 forceps and straight-edge spring scissors) by the scope.</li>
	<li>Under the dissecting scope, remove excess tissue around the DRG and trim the nerve roots close to the DRG body (typically slightly darker than the surrounding nerves).</li>
	<li>Fill a second 60 mm Petri dish with fresh media. Under the dissecting scope, cut the trimmed DRGs to about 0.5 mm (or between 0.5 mm and 0.8 mm). A ruler is placed under the Petri dish during cutting to have the correct estimated size of cut DRGs.</li>
	<li>Transfer cut DRGs into a fresh 24-well plate with the media on ice. 
	NOTE: DRG trimming, cutting, and embedding should be done in a laminar flow cabinet to provide an aseptic workspace. In the absence of a laminar flow cabinet, aseptic techniques must be observed, with minimum appropriate personal protective equipment (PPE) recommended (lab coat, masks, goggles, and gloves) and all tools sterilized throughout the process to mitigate potential contamination.</li>
</ol>
9. Collagen neutralization
<ol>
	<li>Neutralize the collagen on the same day as the DRG harvest after trimming and cutting the DRGs.</li>
	<li>Working on ice, pipette ~8.16 % ultra-pure water, ~1.84% 1 M sodium hydroxide (NaOH), ~10% 10x PBS, and ~80% of collagen of the total volume of solution into a glass vial.</li>
	<li>Mix slowly using a sterile low-retention pipette tip to pipette collagen (usually added last) into the mixture. Ensure to keep the pipette tip in the solution while mixing to avoid creating bubbles. Check the pH of the neutralized collagen using pH strips to be sure it is ~7. 
	NOTE: Neutralized collagen can be kept on ice for 2-3 h without gelling; therefore, hydrogel fabrication should be carried out expeditiously once collagen is neutralized.</li>
</ol>
10. Hydrogel fabrication
<ol>
	<li>Working on ice, pipette laminin (to a final concentration of 0.75 mg/mL) and 1x PBS into a glass vial.</li>
	<li>Using sterile low retention pipette tips, pipette neutralized collagen and MAHA solution into the mixture to arrive at the desired concentration.</li>
	<li>Mix slowly and check the pH of the resulting hydrogel (should be ~7).</li>
</ol>
11. DRG embedding
<ol>
	<li>Perform multi-compartment embedding.
	<ol>
		<li>Pipette 65.1 &#181;L and 52.8 &#181;L of the pre-mixed hydrogel into the soma and neurite compartments, respectively. 
		NOTE: This assumes the use of MC devices in a 48-well plate. These volumes can be changed based on the size of the MC device used.</li>
		<li>Gently embed the cut DRGs into the soma compartment (Figure 2A), ensuring they do not scratch the bottom of the well plate. Place the DRG in the middle so the neurites can grow into the adjacent compartments through the tunnels.</li>
		<li>Thermal crosslink the hydrogel in the incubator at 37 &#176;C for 30 min. While this occurs, turn on the UV lamp to warm up.</li>
		<li>After thermal crosslinking, UV crosslink the hydrogel for 90 s.</li>
		<li>Add DRG growth media to the hydrogel and DRG and perform a full media change after an hour to eliminate unreacted or remaining traces of photoinitiator that persist in the media.</li>
		<li>Perform a half media change every 3 days and monitor the growth of the DRGs by viewing under the microscope.</li>
		<li>After ~4 weeks, when DRG neurites begin to grow (Figure 3A), capture images with the fluorescent plate imager and quantify the length of neurites using FIJI (ImageJ).</li>
	</ol>
	</li>
</ol>
12. Control DRG embedding
<ol>
	<li>Pipette 250 &#181;L of hydrogel in a 48-well plate (without MC).</li>
	<li>Gently place the cut DRG in the middle of the well and halfway down into the hydrogel, ensuring it does not scratch the bottom of the well plate.</li>
	<li>Thermal crosslink the hydrogel in the incubator at 37 &#176;C for 30 min.</li>
	<li>UV crosslink the hydrogel for 90 s.</li>
	<li>Add DRG growth media to the hydrogel and DRG and perform a full media change after an hour.</li>
	<li>Perform half media change every 3 days and monitor the growth of the DRG by viewing it under the microscope.</li>
	<li>After ~4 weeks, when DRG neurites begin to grow (Figure 3B), capture images with the fluorescent plate imager. 
	NOTE: Any brightfield microscope will work for imaging. An automated plate-based microscope makes this process faster. Control embedding in plain gels without the device is done to compare the growth of DRG neurites in multi-compartment. Once users validate that DRGs grow similarly in MC and control gels, they may not need to repeat control gels each time.</li>
</ol>
13. DRG imaging
<ol>
	<li>Capture brightfield images at 4x magnification using a fluorescent plate imager at a range of focal distances to visualize the entire DRG and MC Device.</li>
	<li>Adjust the brightness and contrast of the image to make it easier to view the neurites.</li>
	<li>Save the image as a .tiff file.</li>
</ol>
14. DRG neurite quantification
<ol>
	<li>Download and install FIJI (ImageJ).</li>
	<li>Open ImageJ. Open the image file and ensure that the file is monochrome.</li>
	<li>Enhance the contrast so that the smallest neurites are visible. Do this by opening the brightness and contrast option using the shortcut Ctrl+Shift+C.</li>
	<li>Adjust the sliders of the controller as needed to visualize the neurites, and click on Apply for the desired brightness and contrast.</li>
	<li>Open the neurite tracer by opening the Plugins menu, selecting Segmentation, and clicking on Simple Neurite Tracer.</li>
	<li>Start a new trace by clicking on one end of the neurite right up against the DRG body.</li>
	<li>Click another point along the neurite to add a trace until the neurite is traced end to end. Click on Finish Path after tracing the neurite.</li>
	<li>Convert the traced length to real units and save the results by copying and pasting them into Excel.</li>
	<li>Use the straight-line tool in FIJI to draw a line of the same length as the scale bar (not letting go of the end of the line) and look at the length value visible under the toolbar. The length value is used for the conversion.</li>
	<li>Measure the length of six long neurites extending from both sides of the DRG (Figure 3C,D) and calculate the average length of these neurites to give a representative average length of the DRG, as shown in Figure 4. 
	NOTE: Immunostaining has been tested on DRG explants in plain gels to show the presence of non-neuronal support cells7. DRGs are fixed in 4% paraformaldehyde (PFA) at room temperature, washed three times with 1x PBS for 15 min, and stored in 1x PBS at 4 &#176;C until immunostaining.</li>
	<li>For explants in MC devices, remove the MC device and follow the same process described above7.</li>
</ol>

Advanced In Vitro Model for Studying Neuronal Hypersensitivity in DRG Cultures

<ol>
	<li>Vos, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global,+regional,+and+national+incidence,+prevalence,+and+years+lived+with+disability+for+310+diseases+and+injuries,+1990-2015:+A+systematic+analysis+for+the+global+burden+of+disease+study+2015.">Global, regional, and national incidence, prevalence, and years lived with disability for 310 diseases and injuries, 1990-2015: A systematic analysis for the global burden of disease study 2015.</a> Lancet. 388 (10053), 1545-1602 (2016).</li><li>Goldberg, D. S., Mcgee, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pain+as+a+global+public+health+priority.">Pain as a global public health priority.</a> BMC Public Health. 11 (1), 770 (2011).</li><li>Gaskin, D. J., Richard, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+economic+costs+of+pain+in+the+United+States.">The economic costs of pain in the United States.</a> J Pain. 13 (8), 715-724 (2012).</li><li>Kim, Y. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coupled+activation+of+primary+sensory+neurons+contributes+to+chronic+pain.">Coupled activation of primary sensory neurons contributes to chronic pain.</a> Neuron. 91 (5), 1085-1096 (2016).</li><li>Im, H. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alteration+of+sensory+neurons+and+spinal+response+to+an+experimental+osteoarthritis+pain+model.">Alteration of sensory neurons and spinal response to an experimental osteoarthritis pain model.</a> Arthritis Rheum. 62 (10), 2995-3005 (2010).</li><li>Jensen, T. S., Finnerup, N. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Allodynia+and+hyperalgesia+in+neuropathic+pain:+Clinical+manifestations+and+mechanisms.">Allodynia and hyperalgesia in neuropathic pain: Clinical manifestations and mechanisms.</a> Lancet Neurol. 13 (9), 924-935 (2014).</li><li>Berge, O. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Predictive+validity+of+behavioral+animal+models+for+chronic+pain.">Predictive validity of behavioral animal models for chronic pain.</a> Br J Pharmacol. 164 (4), 1195-1206 (2011).</li><li>Anderson, W. A., Willenberg, A. R., Bosak, A. J., Willenberg, B. J., Lambert, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+a+capillary+alginate+gel+(capgel&#8482;)+to+study+the+three-dimensional+development+of+sensory+nerves+reveals+the+formation+of+a+rudimentary+perineurium.">Use of a capillary alginate gel (capgel&#8482;) to study the three-dimensional development of sensory nerves reveals the formation of a rudimentary perineurium.</a> J Neurosci Methods. 305, 46-53 (2018).</li><li>Mohammed Izham, N. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exploring+the+possibilities+of+using+in+vitro+model+for+neuropathic+pain+studies.">Exploring the possibilities of using in vitro model for neuropathic pain studies.</a> Neurosci Res Notes. 5, 144 (2022).</li><li>Park, S. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+three-dimensional+in+vitro+model+of+the+peripheral+nervous+system.">A three-dimensional in vitro model of the peripheral nervous system.</a> NPG Asia Mater. 13 (1), 2 (2021).</li><li>Caparaso, S. M., Redwine, A. L., Wachs, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+a+multi-compartment+in+vitro+model+for+dorsal+root+ganglia+phenotypic+assessment.">Engineering a multi-compartment in vitro model for dorsal root ganglia phenotypic assessment.</a> J Biomed Mater Res B Appl Biomater. 111 (11), 1903-1920 (2023).</li><li>Krug, A. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+a+human+neurite+growth+assay+as+specific+screen+for+developmental+neurotoxicants.">Evaluation of a human neurite growth assay as specific screen for developmental neurotoxicants.</a> Arch Toxicol. 87 (12), 2215-2231 (2013).</li><li>F, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extracellular+matrix+stiffness+negatively+affects+axon+elongation,+growth+cone+area+and+F-actin+levels+in+a+collagen+type+I+3D+culture.">Extracellular matrix stiffness negatively affects axon elongation, growth cone area and F-actin levels in a collagen type I 3D culture.</a> J Tissue Eng Regen Med. 16 (2), 151-162 (2021).</li><li>Spearman, B. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tunable+methacrylated+hyaluronic+acid-based+hydrogels+as+scaffolds+for+soft+tissue+engineering+applications.">Tunable methacrylated hyaluronic acid-based hydrogels as scaffolds for soft tissue engineering applications.</a> J Biomed Mater Res A. 108 (2), 279-291 (2020).</li><li>Zhu, W., Oxford, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differential+gene+expression+of+neonatal+and+adult+DRG+neurons+correlates+with+the+differential+sensitization+of+TRPV1+responses+to+nerve+growth+factor.">Differential gene expression of neonatal and adult DRG neurons correlates with the differential sensitization of TRPV1 responses to nerve growth factor.</a> Neurosci Lett. 500 (3), 192-196 (2011).</li><li>Van De Wijdeven, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structuring+a+multi-nodal+neural+network+in+vitro+within+a+novel+design+microfluidic+chip.">Structuring a multi-nodal neural network in vitro within a novel design microfluidic chip.</a> Biomed Microdevices. 20, 1-8 (2018).</li><li>Chan, J. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=NGF+controls+axonal+receptivity+to+myelination+by+Schwann+cells+or+oligodendrocytes.">NGF controls axonal receptivity to myelination by Schwann cells or oligodendrocytes.</a> Neuron. 43 (2), 183-191 (2004).</li><li>Ng, B. K., Chen, L., Mandemakers, W., Cosgaya, J. M., Chan, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anterograde+transport+and+secretion+of+brain-derived+neurotrophic+factor+along+sensory+axons+promote+Schwann+cell+myelination.">Anterograde transport and secretion of brain-derived neurotrophic factor along sensory axons promote Schwann cell myelination.</a> J Neurosci. 27 (28), 7597-7603 (2007).</li><li>Xiao, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=BDNF+exerts+contrasting+effects+on+peripheral+myelination+of+NGF-dependent+and+BDNF-dependent+drg+neurons.">BDNF exerts contrasting effects on peripheral myelination of NGF-dependent and BDNF-dependent drg neurons.</a> J Neurosci. 29 (13), 4016-4022 (2009).</li><li>Seidlits, S. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effects+of+hyaluronic+acid+hydrogels+with+tunable+mechanical+properties+on+neural+progenitor+cell+differentiation.">The effects of hyaluronic acid hydrogels with tunable mechanical properties on neural progenitor cell differentiation.</a> Biomaterials. 31 (14), 3930-3940 (2010).</li><li>Tomal, W., Ortyl, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Water-soluble+photoinitiators+in+biomedical+applications.">Water-soluble photoinitiators in biomedical applications.</a> Polymers. 12 (5), 1073 (2020).</li><li>Leary, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Avma guidelines for the euthanasia of animals: 2013 edition. , (2013).</li><li>Sleigh, J. N., Weir, G. A., Schiavo, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple,+step-by-step+dissection+protocol+for+the+rapid+isolation+of+mouse+dorsal+root+ganglia.">A simple, step-by-step dissection protocol for the rapid isolation of mouse dorsal root ganglia.</a> BMC Res Notes. 9 (1), 82 (2016).</li><li>Naveed, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simple+methods+of+dissection+protocols+for+the+rapid+isolation+of+rat+dorsal+root+ganglia+under+the+non-microscopic+condition.">Simple methods of dissection protocols for the rapid isolation of rat dorsal root ganglia under the non-microscopic condition.</a> Neuroscience Research Notes. 6 (2), 212 (2023).</li><li>Perner, C., Sokol, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protocol+for+dissection+and+culture+of+murine+dorsal+root+ganglia+neurons+to+study+neuropeptide+release.">Protocol for dissection and culture of murine dorsal root ganglia neurons to study neuropeptide release.</a> STAR Protocols. 2 (1), 100333 (2021).</li><li>Bai, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+high-resolution+anatomical+rat+atlas.">A high-resolution anatomical rat atlas.</a> J Anatomy. 209 (5), 707-708 (2006).</li><li>Bian, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+influence+of+hyaluronic+acid+hydrogel+crosslinking+density+and+macromolecular+diffusivity+on+human+MSC+chondrogenesis+and+hypertrophy.">The influence of hyaluronic acid hydrogel crosslinking density and macromolecular diffusivity on human MSC chondrogenesis and hypertrophy.</a> Biomaterials. 34 (2), 413-421 (2013).</li><li>Haberberger, R. V., Barry, C., Dominguez, N., Matusica, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Human+dorsal+root+ganglia.">Human dorsal root ganglia.</a> Front Cell Neurosci. 13, 271 (2019).</li><li>Schwaid, A. G., Krasowka-Zoladek, A., Chi, A., Cornella-Taracido, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+the+rat+and+human+dorsal+root+ganglion+proteome.">Comparison of the rat and human dorsal root ganglion proteome.</a> Scientific Rep. 8 (1), 13469 (2018).</li></ol>

The authors of this study declare that they have no conflict of interest.

This protocol outlines a method to harvest adult Sprague Dawley DRGs and culture them in 3D natural hydrogels. In contrast to this method, other approaches to harvesting DRGs from mice and rats involve isolating the spinal column. The excised spinal column is halved, and the spinal cord is removed to expose DRGs23,24,25. Damage to the spinal cord limits blood supply, which affects DRGs and internal neurons26</s...

Chronic pain is the leading cause of disability and loss of work globally1. Chronic pain affects about 20% of adults globally and imposes a significant societal and economic burden2, with total costs estimated between $560 and $635 billion every year in the United States3.
The main peripheral feature exhibited by chronic pain patients is a lowered stimulation threshold of nerves, which leads to the nervous system being more responsive to stimuli4,5. The lowered stimulation threshold can result in a painful response to a previously non-painful stimulus (allodynia) or a heightened response to a painful stimulus (hyperalgesia)6. Current chronic pain treatments have limited efficacy, and treatments that succeed in animal models often fail in human trials due to mechanistic differences in pain manifestation7. In vitro models that can more accurately mimic peripheral sensitization mechanisms have the potential to increase the translation of new therapeutics8,9. Further, by modeling key aspects of sensitized nerves in a culture system, researchers could develop a deeper understanding of the mechanisms that drive lowered thresholds and identify novel therapeutic targets that reverse them10.
The ideal in vitro platforms or microphysiological systems would incorporate the physical separation of distal neurites and dorsal root ganglia (DRG) cell body, a three-dimensional (3D) cellular environment, and the presence of native support cells to closely mimic in vivo conditions. However, a recent paper by Caparaso et al.11 shows that current DRG culture platforms lack one or more of these key features, making them insufficient in replicating in vivo conditions. Even though these platforms are easy to set up, they do not mimic the biological basis of peripheral sensitization and thus may not translate to in vivo efficacy. To address this limitation, a physiologically relevant in vitro model has been developed for the culture of dorsal root ganglia (DRG) within a hydrogel matrix with three isolated compartments to allow temporal fluidic isolation of neurites and DRG cell bodies11. This model offers both physiological and anatomical relevance, which has the potential to study peripheral sensitization of neurons in vitro.
The growing interest in the use of DRG explants in a 3D culture is due to their ability to facilitate robust neurite growth, which serves as an indirect indicator of DRG viability12. While primary neonatal or embryonic DRG explants are predominantly used in current in vitro culture platforms13,14, using explants from adult rodents provides a better model of mature neuronal physiology, which closely mimics human DRG physiology compared to explants from neonatal or embryonic rodents15. Explant DRGs refer to the preservation of the cellular and molecular tissue of native DRG tissue, primarily by maintaining native non-neuronal support cells.Herein, this protocol describes the methodology to harvest and culture DRG explants from adult Sprague Dawley rats in a multi-compartment (MC) device (Figure 1).
Efficacy has been shown in culturing DRGs from the cervical, thoracic, and lumbar spine with no observable differences in neurite growth. For this application, the objective was to elicit neurite growth into the outer compartments of the device; therefore, this article did not discriminate among DRG levels. However, if needed for a specific experiment, the DRG level can be tailored to meet experimenters&#39; needs. There are currently other compartmentalized culture models for the 3D culture of DRGs16, however, these devices do not contain preserved native non-neuronal support cells, which can limit translation. Preserving the native structure of harvested DRGs is important because it ensures the retention of non-neuronal support cells, whose interactions with DRG neurons are essential for maintaining the functional properties of these neurons. Several studies co-cultured dissociated DRGs with non-native neuronal cells such as Schwann cells to promote myelination of neurons17,18,19.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>#5 forceps</td>
			<td>Fine Science Tools</td>
			<td>11252-00</td>
			<td>For trimming and cutting DRG</td>
		</tr>
		<tr>
			<td>10x DMEM</td>
			<td>MilliporeSigma</td>
			<td>D2429</td>
			<td></td>
		</tr>
		<tr>
			<td>1x PBS (autoclaved)</td>
			<td>Prepared in lab</td>
			<td></td>
			<td>7.3 - 7.5 pH</td>
		</tr>
		<tr>
			<td>24 well plates</td>
			<td>VWR</td>
			<td>82050-892</td>
			<td>To temporarily store harvested and cut DRGs</td>
		</tr>
		<tr>
			<td>3 mL Syringe sterile, single use</td>
			<td>BD</td>
			<td>309657</td>
			<td></td>
		</tr>
		<tr>
			<td>48 well plates</td>
			<td>Greiner Bio-One</td>
			<td>677180</td>
			<td></td>
		</tr>
		<tr>
			<td>60 mm Petri dish</td>
			<td>Fisher Scientific</td>
			<td>FB0875713A</td>
			<td>To hold media for trimming and cutting</td>
		</tr>
		<tr>
			<td>Aluminium foil</td>
			<td>Fisherbrand</td>
			<td>01-213-104</td>
			<td></td>
		</tr>
		<tr>
			<td>B27 Plus 50x</td>
			<td>ThermoFisher</td>
			<td>17504044</td>
			<td>For DRG media</td>
		</tr>
		<tr>
			<td>Collagen type I</td>
			<td>Ibidi</td>
			<td>50205</td>
			<td></td>
		</tr>
		<tr>
			<td>Curved cup Friedman Pearson Rongeur</td>
			<td>Fine Science Tools</td>
			<td>16221-14</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Dumont #3 forceps</td>
			<td>Fine Science Tools</td>
			<td>11293-00</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Fetal Bovine Serum (FBS)</td>
			<td>ThermoFisher</td>
			<td>16000044</td>
			<td>For DRG media</td>
		</tr>
		<tr>
			<td>Form cure</td>
			<td>Form Labs</td>
			<td></td>
			<td>curing agent</td>
		</tr>
		<tr>
			<td>Form wash</td>
			<td>Form Labs</td>
			<td></td>
			<td>To wash excess resins off MC</td>
		</tr>
		<tr>
			<td>Glass bead sterilizer</td>
			<td>Fisher Scientific</td>
			<td>NC9531961</td>
			<td></td>
		</tr>
		<tr>
			<td>Glass vials (8 mL)</td>
			<td>DWK Life Sciences (Wheaton)</td>
			<td>224724</td>
			<td></td>
		</tr>
		<tr>
			<td>GlutaMax</td>
			<td>ThermoFisher</td>
			<td>35050-061</td>
			<td>For DRG media</td>
		</tr>
		<tr>
			<td>HEPES (1M)</td>
			<td>Millipore Sigma</td>
			<td>H0887</td>
			<td></td>
		</tr>
		<tr>
			<td>High temp V2 resin</td>
			<td>FormLabs</td>
			<td>FLHTAM02</td>
			<td></td>
		</tr>
		<tr>
			<td>Hyaluronic Acid Sodium Salt</td>
			<td>MilliporeSigma</td>
			<td>53747</td>
			<td>Used to make MAHA</td>
		</tr>
		<tr>
			<td>Irgacure</td>
			<td>MilliporeSigma</td>
			<td>410896</td>
			<td></td>
		</tr>
		<tr>
			<td>Laminin</td>
			<td>R&#38;D Systems</td>
			<td>344600501</td>
			<td></td>
		</tr>
		<tr>
			<td>Large blunt-nose scissors</td>
			<td>Militex</td>
			<td>EG5-26</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Large forceps (serrated tips)</td>
			<td>Militex</td>
			<td>9538797</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Large sharp-nosed scissors</td>
			<td>Fine Science Tools</td>
			<td>14010-15</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Low Retention pipette tips</td>
			<td>Fisher Scientific</td>
			<td>02-707-017</td>
			<td>For pipetting collagen and MAHA</td>
		</tr>
		<tr>
			<td>Methacrylated hyaluronic acid (MAHA)</td>
			<td>Prepared in lab</td>
			<td>N/A</td>
			<td>85 - 115 % methacrylation</td>
		</tr>
		<tr>
			<td>Nerve Growth Factor (NGF)</td>
			<td>R&#38;D Systems</td>
			<td>556-NG-100</td>
			<td>For DRG media</td>
		</tr>
		<tr>
			<td>Neurobasal A Media</td>
			<td>ThermoFisher</td>
			<td>10888022</td>
			<td>For DRG media</td>
		</tr>
		<tr>
			<td>Parafilm</td>
			<td>Bemis</td>
			<td>PM996</td>
			<td></td>
		</tr>
		<tr>
			<td>Parafilm</td>
			<td>Bemis</td>
			<td>PM996</td>
			<td></td>
		</tr>
		<tr>
			<td>Penicillin/Streptomycin (PS)</td>
			<td>EMD Millipore</td>
			<td>516106</td>
			<td>For DRG media</td>
		</tr>
		<tr>
			<td>pH test strips</td>
			<td>VWR International</td>
			<td>BDH35309.606</td>
			<td></td>
		</tr>
		<tr>
			<td>Pipette tips (1000 &#181;L)</td>
			<td>USA Scientific</td>
			<td>1111-2021</td>
			<td></td>
		</tr>
		<tr>
			<td>Preform 3.23.1 software</td>
			<td>Formslab</td>
			<td></td>
			<td>To upload STL file</td>
		</tr>
		<tr>
			<td>Rat</td>
			<td>Charles River</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Resin 3D printer</td>
			<td>Form Labs</td>
			<td>Form 3L</td>
			<td>3D printing MC device</td>
		</tr>
		<tr>
			<td>Small sharp-nosed scissors</td>
			<td>Fine Science Tools</td>
			<td>14094-11</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Sodium bicarbonate</td>
			<td>MilliporeSigma</td>
			<td>S6014</td>
			<td></td>
		</tr>
		<tr>
			<td>Straight cup rongeur</td>
			<td>Fine Science Tools</td>
			<td>16004-16</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Straight edge spring scissors</td>
			<td>Fine Science Tools</td>
			<td>15024-10</td>
			<td>For dissection</td>
		</tr>
		<tr>
			<td>Surgical Scaplel blade (No. 10)</td>
			<td>Fisher Scientific</td>
			<td>22-079-690</td>
			<td></td>
		</tr>
		<tr>
			<td>Syring filters, PES (0.22 &#181;m)</td>
			<td>Celltreat</td>
			<td>229747</td>
			<td></td>
		</tr>
		<tr>
			<td>Tiny spring scissors</td>
			<td>World Precision Instruments</td>
			<td>14003</td>
			<td>For trimming and cutting DRG</td>
		</tr>
		<tr>
			<td>UV lamp</td>
			<td>Analytik Jena US</td>
			<td></td>
			<td>To photocrosslink hydrogel (15 - 18 mW/cm2)</td>
		</tr>
	</tbody>
</table>

harvesting, embedding, and culturing dorsal root ganglia in multi-compartment devices to study peripheral neuronal features

The most common peripheral neuronal feature of pain is a lowered stimulation threshold or hypersensitivity of terminal nerves from the dorsal root ganglia (DRG). One proposed cause of this hypersensitivity is associated with the interaction between immune cells in the peripheral tissue and neurons. In vitro models have provided foundational knowledge in understanding how these mechanisms result in nociceptor hypersensitivity. However, in vitro models face the challenge of translating efficacy to humans. To address this challenge, a physiologically and anatomically relevant in vitro model has been developed for the culture of intact dorsal root ganglia (DRGs) in three isolated compartments in a 48-well plate. Primary DRGs are harvested from adult Sprague Dawley rats after humane euthanasia. Excess nerve roots are trimmed, and the DRG is cut into appropriate sizes for culture. DRGs are then grown in natural hydrogels, enabling robust growth in all compartments. This multi-compartment system offers anatomically relevant isolation of the DRG cell bodies from neurites, physiologically relevant cell types, and mechanical properties to study the interactions between neural and immune cells. Thus, this culture platform provides a valuable tool for investigating treatment isolation strategies, ultimately leading to an improved screening approach for predicting pain.

Author Spotlight: In Vitro and In Vivo Models to Enhance Chronic Pain Treatment Efficacy

Harvesting, Embedding, and Culturing Dorsal Root Ganglia in Multi-compartment Devices to Study Peripheral Neuronal Features

Our research seeks to understand some of the underlying mechanisms that contribute to chronic musculoskeletal pain, so we can develop novel targeted treatments. Thus, we have developed in vitro and in vivo models of chronic low back pain and neuronal sensitization. Current therapeutics that work in vivo in animal models often fail clinical trials due to mechanistic differences between animal models and human subject chronic pain phenotype.Individual test by that model, nociceptor hypersensitivity present in chronic pain have the potential to identify more promising treatments for chronic pain in humans. Our protocol clearly demonstrates how to isolate primary dorsal root ganglia, and culture them in a multi compartment device. By keeping intact primary dorsal root ganglia, we maintain native support cells and culture them in a multi compartment device, allowing anatomically relevant isolation between neuronal somas and peripheral neurites.This tool will help to culture primary dorsal root ganglia in a more physiologically and anatomically relevant way, thereby increasing translational efficacy of findings. Specifically, we are excited to use this system to identify novel treatment for nociceptor hypersensitivity present in chronic pain.

The present protocol described a technique to harvest and culture DRG from adult Sprague Dawley rats in a multi-compartment (MC) device. As shown&#160;in Figure 1, DRG harvested from adult rats was trimmed and cut into ~0.5 mm. The trimmed and cut DRGs were then embedded in a hydrogel in the soma region of the MC device (Figure 2) and cultured for 27 days before neurite quantification. DRG was cultured in plain gel to serve as the control. The c...

This protocol provides a technique to harvest and culture explanted dorsal root ganglion (DRG) from adult Sprague Dawley rats in a multi-compartment (MC) device.

The most common peripheral neuronal feature of pain is a lowered stimulation threshold or hypersensitivity of terminal nerves from the dorsal root ganglia ...

harvesting-embedding-culturing-dorsal-root-ganglia-multi-compartment

Research

JoVE Journal

Bioengineering

Assembly of Multi-Compartment Device and Harvesting of Dorsal Root Ganglia (DRG) from Adult Sprague Dawley Rats

To begin, use a three milliliter syringe to apply a thin line of silicone gel into the groove beneath the MC device. Using number three forceps gently position the MC device into the well of a 48 well plate. Place the device into a 48 well plate one day before harvesting the dorsal root ganglion.Place the euthanized rat on the dissection platform. Using large blunt nose scissors, make an incision through the skin at the base of the cervical spine and extend it down the length of the spine. To further drain blood from the spinal canal, cut beneath the shoulder blades and through the muscle to sever major blood vessels.Using large sharp nose scissors, cut the muscle away from the spine, then remove the dorsal segments of the vertebrae. Use straight rongeur and sharp nose scissors to remove the spinous and transverse processes of the vertebrae starting at the cervical end and moving towards the lumbar end. Afterward, remove the spinal cord.Using small sharp nose scissors, carefully sever the nerve roots connected to the dorsal root ganglia along both sides of the spinal cord. Now cut the cervical end of the spinal cord and gradually lift it out of the spinal canal, severing any remaining nerve roots connected to the dorsal root ganglia. To expose the dorsal root ganglia, use a curved rongeur to remove additional lateral parts of the vertebrae.Using number three forceps and straight edge spring scissors, extract the dorsal root ganglia between each vertebra level. Grip the spinal nerve roots from the dorsal root ganglia. Gently pull them out of the pocket and cut through the other end of the spinal nerve.Lastly, place the dorsal root ganglia into wells of a 24 well plate on ice.

Trimming, Cutting, and Embedding the Dorsal Root Ganglion for Culturing in a Multi-Compartment (MC) Device

To begin, take the harvested dorsal root ganglia. On a clean bench, fill a 60-millimeter Petri dish with trimming media. Arrange the dissecting scope and glass bead sterilizer, and place an autoclave toolbox with trimming tools next to the scope.Using the dissecting scope, remove any excess tissue around the dorsal root ganglion, and trim the nerve roots close to the dorsal root ganglion body. Now, fill a second 60-millimeter Petri dish with fresh media. Using the dissecting scope, cut the trimmed dorsal root ganglia to approximately 0.5 millimeters.Transfer the cut dorsal root ganglia into a fresh 24-well plate containing media on ice. Then, pipette 65.1 and 52.8 microliters of the premixed hydrogel into the soma and neurite compartments, respectively. Carefully embed the cut dorsal root ganglia into the soma compartment.Thermally cross-link the hydrogel in the incubator at 37 degrees Celsius for 30 minutes. Then, UV cross-link the hydrogel for 90 seconds. Afterward, add dorsal root ganglia growth media to the hydrogel and dorsal root ganglia.Perform a complete media change after one hour to remove any unreactive or residual photo-initiator in the media.

Quantification of Dorsal Root Ganglion Neurite Growth in a Multi-Compartment (MC) Device Using Fiji

After imaging the dorsal root ganglion cultured in a multi-compartment device, launch Image J and open the image file. To enhance the contrast and make the smallest neurites visible using the shortcuts Control with Shift and C, open the Brightness and Contrast option. Adjust the brightness and contrast sliders to visualize the neurites.Then click on Apply. Now, navigate to Plugins, select Segmentation, and click Simple Neurite Tracer to open the neurite tracer. Then, click on one end of the neurite at the dorsal root ganglion body to initiate a new trace, and continue adding points along the neurite until it is fully traced.Then click on Complete Path. Using the straight line tool in Fiji, draw a line of the same length as the scale bar without releasing the end of the line. And note the length value under the toolbar.Set the scale to convert the neurite length to real units and copy the results to Excel. Then, convert the lengths to real units in Excel. Then, measure the length of six long neurites extending from both sides of the dorsal root ganglion, and calculate the average length and standard deviation of the dorsal root ganglion.On days 27 and 21, there was robust growth of neurites in the multi compartment and plain gels, respectively. The average length of neurites in the multi compartment device was comparable to neurite length in control plane gels.

383 Views.  University of Nebraska-Lincoln.  This protocol provides a technique to harvest and culture explanted dorsal root ganglion (DRG) from adult Sprague Dawley rats in a multi-compartment (MC) device.

Advanced In Vitro Model for Studying Neuronal Hypersensitivity in DRG Cultures

概要