protocol for measuring mitophagy in hep-3b cancer cells 17

Quantifying Mitophagy in &lt;em&gt;C. elegans&lt;/em&gt; and a Liver Cancer Cell Line

Mitochondria are essential for all aerobic animals, including humans. They convert the chemical energy of biomolecules to adenosine triphosphate (ATP) via oxidative phosphorylation1, synthesize heme2, degrade fatty acids through &#946; oxidation3, regulate calcium4 and iron5 homeostasis, control cell death by apoptosis6, and generate reactive oxygen species (ROS), which play a vital role in redox homeostasis7. Two complementary and opposite processes maintain the integrity and proper function of the mitochondria: the synthesis of new mitochondrial components (biogenesis) and the selective removal of damaged ones through mitochondrial autophagy (i.e., mitophagy)8.
Several mitophagy pathways are mediated by enzymes, such as PINK1/Parkin, and receptors, including FUNDC1, FKBP8, and BNIP/NIX9,10. Notably, the selective degradation of mitochondrial components can occur independently of the autophagosome machinery (i.e., through mitochondrial-derived vesicles)11. However, the endpoints of the different selective mitophagy pathways are similar&#160;(i.e.,mitochondrial degradation by lysosomal enzymes)12,13. For this reason, various methods for identifying and measuring mitophagy rely on the colocalization of mitochondrial and lysosomal markers14,15,16,17 and decreased levels of mitochondrial proteins/mitochondrial DNA18.
Below is a concise description of the existing experimental methodologies for measuring mitophagy in animal cells using fluorescence microscopy, emphasizing the mitophagy endpoint phase.
Mitophagy biosensors 
Mitochondrial degradation occurs within the acidic environment of the lysosome19. Therefore, mitochondrial components, including proteins, experience a shift from a neutral to an acidic pH at the endpoint of the mitophagy process. This pattern underpins the mechanism of action of several mitophagy biosensors, including mito-Rosella18 and tandem mCherry-GFP-FIS114. These sensors contain a pH-sensitive green fluorescence protein (GFP) and a pH-insensitive red fluorescence protein (RFP). Therefore, at the endpoint of mitophagy, the green-to-red fluorescence ratio drops significantly due to the quenching of the GFP fluorophore. The major limitations of these sensors are (1) possible F&#246;rster resonance energy transfer (FRET) between the fluorophores; (2) the differential maturation rate of GFP and RFP; (3) dissociation between the GFP and RFP due to proteolytic cleavage of the polypeptide that connects them; (4) fluorescence-emission overlap; and (5) differential fluorophore brightness and quenching15,16.
A sensor that overcomes some of these limitations is the Keima mitochondrial sensor17. The mt-Keima sensor (derived from the coral protein Keima) displays a single emission peak (620 nm). However, its excitation peaks are pH-sensitive. As a result, there is a transition from a green excitation (440 nm) to a red one (586 nm) when shifting from a high pH to an acidic pH16,17. A more recent mitophagy sensor, Mito-SRAI, has advanced the field by allowing for measurements in fixed biological samples20. However, despite the many advantages of genetic sensors, such as the ability to express them in specific tissues/cells and target them to distinct mitochondrial compartments, they also have limitations. One limitation is that the genetic sensors need to be expressed in cells or animals, which can be time-consuming and resource-intensive.
Additionally, the expression of the sensors within mitochondria themselves may influence the mitochondrial function. For example, expressing mitochondrial GFP (mtGFP) in the C. elegans worm body wall muscles expands the mitochondrial network21. This phenotype depends on the function of the stress-activated transcription factor ATFS-1, which plays an essential role in the activation of unfolded protein response in mitochondria (UPRmt)21. Therefore, although genetically encoded mitochondria/mitophagy biosensors are extremely useful for monitoring mitochondria homeostasis in vivo, they may affect the very process they are designed to measure.
Mitochondria/lysosome-specific antibodies and dyes 
Another strategy for testing mitochondrial/lysosome colocalization is to use antibodies against mitochondrial/lysosomal proteins, such as the mitochondrial outer membrane protein TOM20 and lysosomal-associated membrane protein 1 (LAMP1)22. In most cases, secondary antibodies that are conjugated to a fluorophore are used to detect the fluorescence signal via microscopy. Another strategy is to combine genetic constructs with mitochondrial/lysosomal dyes, such as expressing a LAMP1::GFP fusion construct in cells while staining them with a red mitochondrial dye (e.g., Mitotracker Red)16. These methodologies, while effective, require specific antibodies and often involve working with fixed specimens or generating cells/transgenic animals expressing fluorescently labeled mitochondria/lysosomes.
Here, we outline the utilization of a commercial lysosome/mitochondria/nuclear staining kit for assessing the mitophagy-activating properties of synthetic diamine O,O (octane-1,8-diyl)bis(hydroxylamine), hereafter referred to as VL-85023, in C. elegans worms and the human cancer cell line Hep-3B (Figure 1). The staining kit contains a mixture of lysosomal/mitochondrial/nuclear-targeted dyes that specifically stain these organelles23. We previously used this kit to demonstrate the mitophagy activity of 1,8 diaminooctane (hereafter referred to as VL-004) in C. elegans23. Importantly, we validated the staining kit results with the mito-Rosella biosensor and qPCR measurements of the mitochondrial:nuclear DNA content23. This staining kit offers the following advantages. First, there is no need to generate transgenic animals or cells expressing a mitochondrial biosensor. Therefore, we can study unmodified wild-type animals or cells and, thus, save much time, money, and labor. Moreover, as mentioned, expressing mitochondrial biosensors can change the mitochondrial function. Second, the kit is cost-effective, easy to use, and fast. Third, although we demonstrate the method in C. elegans and human cells, it could be modified for other cell types and organisms.
With that said, like any method, the staining kit protocol has drawbacks. For example, the incubation of the worms with the reagent is carried out in the absence of food (we have seen that even dead bacteria significantly decrease the staining efficiency). Although the incubation time is relatively short, it is possible that even in this time frame, homeostatic responses may be altered, including mitophagy. In addition, the binding of the dyes to the ER/mitochondrial/nuclear proteins and other biomolecules may affect the activities of these organelles. Moreover, unlike mitophagy measurement with genetic sensors, we work with worms and cells that have undergone chemical fixation. Therefore, it is impossible to continue monitoring the same worms/cells at different times. Hence, we recommend combining different methodologies to validate the function of mitophagy in a particular physiological process. Below, we present new data demonstrating that VL-850 induces robust mitophagy in C. elegans worms and Hep-3B cells. Therefore, these data further support the hypothesis that VL-850 extends the lifespan of C. elegans and protects C. elegans from oxidative damage through the induction of healthy mitophagy. We have used the proton ionophore carbonyl cyanide 4-(trifluoromethoxy)phenylhydrazone (FCCP), which is a potent mitophagy inducer24, as a positive control.

Author Spotlight: Detection of Mitophagy in Caenorhabditis elegans and Mammalian Cells Using Organelle-Specific Dyes  

Detection of Mitophagy in Caenorhabditis elegans and Mammalian Cells Using Organelle-Specific Dyes

Degradation of damaged mitochondria by mitophagy is essential for the function of the mitochondrial network. Unfortunately, this process declines with age. We develop and use drugs that activate mitophagy, thereby promoting healthy aging to understand the function of mitophagy in aging and age-related diseases, including Alzheimer's.One of the biggest challenges is to measure the mitophagy process without affecting it. Recent studies have shown that GFP expression in the mitochondria of muscle cells induces stress that is MT UPR. Therefore, using dyes in non-transgenic animals or cells is essential and complements genetic technologies.Our protocol has three main advantages. First, there is no need to generate transgenic animals or cells expressing mitophagy biosensors. Second, no need for expensive infrastructure and expertise such as in case of electron microscopy.And third, the organelle dye cocktail is commercially available and the protocol is simple and fast. The new mitophagy-activating compound VL-850 induces robust mitophagy, and in this way protects from oxidative stress and promote lifespan. Now the big question is to determine the underlying mechanism of action.We explored the mechanism at multiple levels, from the cellular to the organismal using C.elegans and mammalian cells.

Watch this Scientific Journal Video about Protocol for Measuring Mitophagy in Hep-3B Cancer Cells 17 at JoVE.com

Protocol for Measuring Mitophagy in Hep-3B Cancer Cells 17  

To begin, take 70 to 80%confluent Hep-3B cells. Remove 250 microliters of medium from each of the wells and add 50 microliters of medium with the appropriate treatment or vehicle. Add 50 microliters of medium to each well containing the staining reagent, and incubate the cells with the dye.After removing the medium and washing the cells with pre-warmed PBS, fix the cells with 200 microliters of fixing solution for 15 minutes at room temperature. Afterward, decant the fixative solution and wash briefly with 200 microliters of PBS. Finally, add 200 microliters of PBS.Keep the cells covered and protected from light at four degrees Celsius, and image within 24 hours.

protocol-for-measuring-mitophagy-in-hep-3b-cancer-cells-17

Research

JoVE Journal

Biology

98 ビュー.  The Hebrew University of Jerusalem. まず、70〜80%コンフルエントなHep-3B細胞を取ります。各ウェルから250マイクロリットルの培地を取り出し、適切な処理またはビヒクルとともに50マイクロリットルの培地を加える。染色試薬を含む各ウェルに50マイクロリットルの培地を加え、細胞を色素とともにインキュベートします。培地を除去し、予め温めたPBSで細胞を洗浄した後、細胞を200マイクロリットル?...