Funding was provided by the Huntsman Cancer Foundation (CJ, CT), American Cancer Society grant #RSG-13-025-01-CSM (RS) and NIH T32 GM007464-36 (SS).

1. Preparation of Solutions
<ol>
	<li>Prepare 500 ml&#160;of 1x&#160;PBST (1x PBS, 0.1% Tween-20), and filter sterilize. 1x PBST can be kept at room temperature (RT) indefinitely as long as there are no signs of bacterial growth.</li>
	<li>CAUTION: Prepare 50 ml of 4% paraformaldehyde (PFA) in a chemical hood by dissolving powdered PFA in 1x PBS at 60 &#176;C for 1 hr and covering in aluminum foil to protect from light. Store at 4 &#176;C for 1 month, or at -20 &#176;C for 2 years.</li>
	<li>Prepare 500 ml of fresh 1x PDT (1x PBST, 0.3% Triton-X, 1% DMSO). 1x PDT can be stored at 4 &#176;C for up to one month.</li>
	<li>Prepare 50 ml of blocking buffer (1x PBST, 10% heat-inactivated fetal bovine serum, 2% bovine serum albumin). Create 10 ml aliquots, and store at -20 &#176;C for up to 1 year. Once thawed, blocking buffer can be stored at 4 &#176;C for up to 48 hr.</li>
	<li>Prepare 100 ml of 4% methylcellulose by heating 30 ml of water to 80 &#176;C. Add 4 g of methylcellulose to the hot water, and mix using a stir bar on a room-temperature stir plate.&#160; Thorough mixing usually takes between 4 hr to overnight. Add the remainder of (unheated) water, and mix at 4 &#176;C for 1 hr. Store at RT.</li>
	<li>If using embryos between tailbud stage and 32 hpf, prepare 50 ml of 10 mg/ml pronase, and store for up to 1 week at 4 &#176;C. Otherwise, store in 10 ml aliquots at -20 &#176;C for up to 1 year.</li>
	<li>Place 50 ml of 100% methanol at -20 &#176;C.</li>
	<li>Prepare 60x&#160;egg water by dissolving 280 g Instant Ocean Sea Salt in 2 L of distilled water (as in Westerfield16). Prepare 1x egg water by diluting the 60x&#160;stock in deionized water.</li>
</ol>
2. Preparation of Embryos
<ol>
	<li>Collect zebrafish embryos in a Petri dish in 1x&#160;egg water between the 4-cell stage and 32 hpf.
	<ol>
		<li>For embryos between the 4-cell and tailbud stages, proceed to step 2.2.</li>
		<li>For embryos between tailbud stage and 32 hpf, remove chorions by adding 100 &#956;l&#160;of 10 mg/ml pronase to embryos in 10 ml of 1x&#160;egg water.</li>
		<li>Note: Pronase activity can be variable between batches. Thus, final pronase concentration should be optimized for dechorionation when new batches are obtained.
		<ol>
			<li>Let incubate at room temperature for 30 min.</li>
			<li>Pour off egg water / pronase solution into waste, and slowly add back fresh 1x egg water.</li>
			<li>Rinse 2x by pouring off existing egg water (and free-floating chorions), and gently add new egg water.</li>
			<li>Note: Most chorions should be removed at this point. With a transfer pipet, gently suck embryos up and down until remaining chorions are removed.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Transfer up to 40 embryos to a 1.5 ml tube. Rinse 2 times with 1 ml of 1x PBST. &#160;</li>
	<li>Remove PBST, leaving liquid just above embryos (approximately 100 &#956;l&#160;volume should remain in the tube). Add 1 ml of 4% PFA. Lay tubes on their side (so embryos spread out along length of tube) in an appropriate-size container for ease of transport (e.g. a Petri dish or a pipet box top), and place on a gentle rocker at 4 &#176;C overnight or up to a week. &#160;
	<ol>
		<li>For embryos between the 4-cell and tailbud stages, manually dechorionate the fixed embryos with forceps.</li>
	</ol>
	</li>
</ol>
3. Immunofluorescence Procedure
<ol>
	<li>Place tubes in a tube rack so that all embryos sink to the bottom of the tube. Remove PFA (to appropriate waste container) leaving liquid just above level of embryos. Following fixation (step 2.3), embryos should never be exposed to air in order to prevent background antibody staining.</li>
	<li>Add 1 ml of ice-cold 100% methanol (to permeabilize) drop-wise. Embryos are now fragile after the fixation, and extra care must be taken to prevent them from tumbling within the tube during all subsequent removal/addition of liquids. Lay tubes on their sides, and place at -20 &#176;C for 2 hr. Alternatively, embryos can be left at -20 &#176;C for up to 24 hr.</li>
	<li>Place tubes in a rack to collect embryos at the bottom of the tube. Remove methanol, leaving liquid just above level of embryos.</li>
	<li>Carefully add 1 ml 1x PDT. Remove PDT, and add 1 ml of fresh 1x PDT. Lay tubes on their sides and gently rock at RT for 30 mins. Remove PDT, and repeat 30&#160;min wash with fresh PDT.</li>
	<li>Remove PDT until liquid is just above the level of the embryos, and add 500 &#956;l&#160;blocking buffer.
	<ol>
		<li>Lay embryos on their side in a transport container, and ensure that embryos do not travel more than 2/3 up the length of the tube. Otherwise, embryos get caught in the lid of the tube and outside of the liquid. &#160;</li>
		<li>Carefully place transport container with tubes on a very-gentle rocker at RT for 1 hr.</li>
	</ol>
	</li>
	<li>Stand tubes upright in a tube rack, and open all tubes to check for embryos stuck on the lid. For any tubes with embryos on the lid, close the top, and gently rock the tube by hand to bring all embryos back into the liquid.</li>
	<li>Add 1 &#956;l&#160;rabbit anti-activated Caspase 3 antibody (1:500 dilution).
	<ol>
		<li>If performing a colabeling experiment, simply add the appropriate dilution of the second nonrabbit-derived antibody in addition to the anti-activated Caspase 3 antibody.</li>
	</ol>
	</li>
	<li>Carefully lay embryos on their side, and gently rock at room temperature for 2 hr. Alternatively, embryos can be incubated at 4 &#176;C overnight.</li>
	<li>Stand tubes in a tube rack. Remove block/antibody solution. Add 1 ml of 1x PDT. Be sure to invert tube by hand to collect any embryos stuck on the lid of the tube. Then, open all tubes to ensure all embryos have been removed from the lid.</li>
	<li>Repeat step 3.4.</li>
	<li>Repeat steps 3.5-3.10, but substitute the anti-activated Caspase 3 antibody with the appropriate dilution of an anti-rabbit fluorophore-conjugated antibody that absorbs blue light and emits green light. However, any fluorophore-conjugated antibody with a user-preferable absorption/emission spectra can be used here. After addition of the secondary antibody, it is important to keep embryos in the dark for the remainder of the assay. Cover the transport container with aluminum foil during the incubation steps, but do not worry about light exposure when changing buffers.
	<ol>
		<li>If performing a colabeling experiment, simply add the appropriate dilution of a complementary fluorophore-conjugated secondary antibody at this step.</li>
		<li>Note: If the user wishes to colabel active-Caspase 3 with Gfp-expressing cells, then the rabbit anti-active Caspase 3 antibody should be followed here by a nongreen-fluorescing anti-rabbit secondary antibody, and the anti-GFP antibody should be followed by a green-fluorescing nonrabbit secondary antibody. This will eliminate confusion if some Gfp fluorescence remains visible after fixation of embryos.</li>
	</ol>
	</li>
</ol>
4. Analysis of Apoptotic Cells by Fluorescence Microscopy
<ol>
	<li>Analyze embryos in 1x PDT in a small Petri dish or glass spot plate under a fluorescent microscope using the appropriate light filter. If positive controls have bright fluorescence with minimal background, then proceed to step 4.2. (If not, consult the troubleshooting section in the Discussion, and repeat the protocol with new embryos.) Embryos can be stored at 4 &#176;C in 1x PDT for up to 48 hr.</li>
	<li>Pour 4% methylcellulose in a 3.5 cm Petri dish, just enough to cover the bottom of the dish. Alternatively, a glass spot plate or depression slide can be used with a large drop of methylcellulose in the depression. Carefully suck embryos from the bottom of the tube into a clean transfer pipet and transfer to the Petri plate for visualization.</li>
	<li>Orient an embryo of interest for documentation using an angled probe. There will likely be some variability between embryos from the same sample, so it is important to take images that represent fluorescence intensity and pattern observed in the majority of the embryos from that sample. Documentation should be performed within 48 hr of completing the assay to prevent accumulation of non-specific background fluorescence. Residual 4% methylcellulose will not interfere with subsequent PCR reactions required for genotyping of embryos.</li>
	<li>Note: To aid in immobilization of an embryo at a certain angle, it is helpful to gently push the embryo to the bottom of the dish so that the yolk or some other part of the embryo (depending on the desired view) is resting on the bottom of the dish. Then, use the probe to move either the embryo or the immediately surrounding methylcellulose (while simultaneously visualizing under the microscope) to obtain the desired angle for documentation.</li>
</ol>

<ol>
	<li>Tait, S. W., Green, D. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitochondria+and+cell+death:+outer+membrane+permeabilization+and+beyond.">Mitochondria and cell death: outer membrane permeabilization and beyond.</a> Nat. Rev. Mol. Cell Biol. 11, 621-632 (2010).</li><li>Taylor, R. C., Cullen, S. P., Martin, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Apoptosis:+controlled+demolition+at+the+cellular+level.">Apoptosis: controlled demolition at the cellular level.</a> Nat. Rev. Mol. Cell Biol. 9, 231-241 (2008).</li><li>Eimon, P. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Delineation+of+the+cell-extrinsic+apoptosis+pathway+in+the+zebrafish.">Delineation of the cell-extrinsic apoptosis pathway in the zebrafish.</a> Cell Death Differ. 13, 1619-1630 (2006).</li><li>Jette, C. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=BIM+and+other+BCL-2+family+proteins+exhibit+cross-species+conservation+of+function+between+zebrafish+and+mammals.">BIM and other BCL-2 family proteins exhibit cross-species conservation of function between zebrafish and mammals.</a> Cell Death Differ. 15, 1063-1072 (2008).</li><li>Kratz, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+characterization+of+the+Bcl-2+gene+family+in+the+zebrafish.">Functional characterization of the Bcl-2 gene family in the zebrafish.</a> Cell Death Differ. 13, 1631-1640 (2006).</li><li>Sidi, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chk1+suppresses+a+caspase-2+apoptotic+response+to+DNA+damage+that+bypasses+p53,+Bcl-2,+and+caspase-3.+.">Chk1 suppresses a caspase-2 apoptotic response to DNA damage that bypasses p53, Bcl-2, and caspase-3. .</a> Cell. 133, 864-877 (2008).</li><li>Zhao, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interruption+of+cenph+causes+mitotic+failure+and+embryonic+death,+and+its+haploinsufficiency+suppresses+cancer+in+zebrafish.">Interruption of cenph causes mitotic failure and embryonic death, and its haploinsufficiency suppresses cancer in zebrafish.</a> J. Biol. Chem. 285, 27924-27934 (2010).</li><li>Yager, T. D., Ikegami, R., Rivera-Bennetts, A. K., Zhao, C., Brooker, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-resolution+imaging+at+the+cellular+and+subcellular+levels+in+flattened+whole+mounts+of+early+zebrafish+embryos.">High-resolution imaging at the cellular and subcellular levels in flattened whole mounts of early zebrafish embryos.</a> Biochem. Cell Biol. 75, 535-550 (1997).</li><li>Furutani-Seiki, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neural+degeneration+mutants+in+the+zebrafish,+Danio+rerio.">Neural degeneration mutants in the zebrafish, Danio rerio.</a> Development. 123, 229-239 (1996).</li><li>Sorrells, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ccdc94+Protects+Cells+from+Ionizing+Radiation+by+Inhibiting+the+Expression+of+p53.">Ccdc94 Protects Cells from Ionizing Radiation by Inhibiting the Expression of p53.</a> PLoS Genet. 8, (2012).</li><li>Gavrieli, Y., Sherman, Y., Ben-Sasson, S. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+programmed+cell+death+in+situ+via+specific+labeling+of+nuclear+DNA+fragmentation.">Identification of programmed cell death in situ via specific labeling of nuclear DNA fragmentation.</a> J. Cell Biol. 119, 493-501 (1992).</li><li>Cole, L. K., Ross, L. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Apoptosis+in+the+developing+zebrafish+embryo.">Apoptosis in the developing zebrafish embryo.</a> Dev. Biol. 240, 123-142 (2001).</li><li>Abrams, J. M., White, K., Fessler, L. I., Steller, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Programmed+cell+death+during+Drosophila+embryogenesis.">Programmed cell death during Drosophila embryogenesis.</a> Development. 117, 29-43 (1993).</li><li>Beers Jr, R. F., Hendley, D. D., Steiner, R. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhibition+and+activation+of+polynucleotide+phosphorylase+through+the+formation+of+complexes+between+acridine+orange+and+polynucleotides.">Inhibition and activation of polynucleotide phosphorylase through the formation of complexes between acridine orange and polynucleotides.</a> Nature. 182, 242-244 (1958).</li><li>Delic, J., Coppey, J., Magdelenat, H., Coppey-Moisan, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Impossibility+of+acridine+orange+intercalation+in+nuclear+DNA+of+the+living+cell.">Impossibility of acridine orange intercalation in nuclear DNA of the living cell.</a> Exp. Cell Res. 194, 147-153 (1991).</li><li>Westerfield, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The Zebrafish Book. , (1993).</li><li>Shin, J., Park, H. C., Topczewska, J. M., Mawdsley, D. J., Appel, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neural+cell+fate+analysis+in+zebrafish+using+olig2+BAC+transgenics.">Neural cell fate analysis in zebrafish using olig2 BAC transgenics.</a> Methods Cell Sci. 25, 7-14 (2003).</li><li>Park, H. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+upstream+elements+in+the+HuC+promoter+leads+to+the+establishment+of+transgenic+zebrafish+with+fluorescent+neurons.">Analysis of upstream elements in the HuC promoter leads to the establishment of transgenic zebrafish with fluorescent neurons.</a> Dev. Biol. 227, 279-293 (2000).</li></ol>

The authors have nothing to disclose.

The Casp3 assay as presented in this protocol is meant to be straightforward, and if performed as instructed herein, should give rise to a robust signal-to-noise ratio. The critical steps of this protocol include the use of fresh 1x&#160;PDT buffer for all washes, sufficient length of wash steps in PDT buffer following incubation of embryos in the primary antibody, gentle handling of embryos, and meticulous accounting for all embryos within tubes or transfer pipets during all steps of the protocol.
In our experience, the following are the most common reasons for lack of a signal on positive controls: 1) 1x PBST is substituted for 1x PDT during washing steps, 2) 1x PDT buffer is older than one&#160;month, 3) the wrong secondary antibody was used, 4) embryos are older than 32 hpf and/or 5) more than 40 embryos were analyzed in one tube. When inconsistent results or variability arises within samples, this is usually because 1) care was not taken to ensure that all embryos remained within liquid at all times during the procedure, and/or 2) embryos were not incubated under sufficient rocking. High levels of background noise are often visualized as a general fluorescent haze arising throughout the animal tissue of the embryo (see Figure 4, &#8220;background fluorescence&#8221;). A poor signal-to-noise ratio can arise when 1) embryos were not washed for sufficient time following the primary antibody, and/or 2) embryos were left in PFA or methanol for longer than the recommended time. If embryos fail to remain intact by the end of the assay: 1) solutions were not added drop-wise following fixation with PFA, and/or 2) rocker speed during incubation steps was set too high.
The whole-mount visualization inherent in the Casp3 assay is helpful for spatial localization of apoptotic cells. However, tissue-specificity is approximate and will likely rely on colabeling techniques (see Figure 5) and/or embryo sectioning to pinpoint the exact identity of cells undergoing apoptosis. In the protocol described here, colabeling is limited by the requirement for the specific rabbit-derived antibody used in our assay. We have not identified a commercially available nonrabbit-derived anti-activated Caspase 3 antibody that specifically labels apoptotic cells by whole-mount immunofluorescence in zebrafish embryos. Thus, cell-type specific antibodies that are raised in rabbits will not be compatible with the Casp3 assay for colabeling experiments. One alternative is to perform a TUNEL assay which requires a mouse-derived antibody to label apoptotic cells6. However, we have found that the whole-mount TUNEL assay performed on zebrafish embryos is very sensitive to a number of variables in the reaction, including the concentration of TdT enzyme, duration of embryo incubation in TdT enzyme, and the number of embryos present per tube (our unpublished observations). Thus, it is challenging to find a balance of enzyme that gives consistent interpretation of results. Therefore, a preferable alternative is to analyze apoptotic cells in transgenic zebrafish embryos that express a fluorophore (with commercially available robust antibodies) like GFP in a specific cell type. Then, colabeling experiments can be performed using a primary mouse anti-Gfp antibody followed by a green-fluorescing anti-mouse secondary antibody. See Figure 5 for an example.
While the Casp3 protocol gives robust, reliable staining of apoptotic cells in embryos from the 4-cell stage through 32 hpf, it has limited application beyond 32 hpf due to the inability of the antibodies to penetrate the skin of older embryos. Additional techniques to permeabilize the embryos, including treatment with collagenase, trypsin, acetone, or ethanol, could potentially be optimized to adapt this assay to the analysis of older embryos. Staining with AO, however, can be performed on live zebrafish up to at least 5 days-old9. Thus, the AO assay circumvents the embryonic stage restriction and represents a rapid assay to analyze apoptotic cells (1-2 hr). By contrast, the Casp3 assay requires overnight fixation of embryos and takes 2-4 days to complete. The disadvantages of the AO assay include that efficient photographic documentation of embryos can be challenging with multiple samples since embryos are alive and apoptotic cells are rapidly formed and cleared. This can be especially problematic if embryos need to be mounted to obtain a specific orientation for documentation. Additionally, we have found that AO staining diminishes after fixation with PFA, so it is not compatible with colabeling experiments involving immunofluorescence.
Quantitative analysis of activated-Caspase 3 can be performed utilizing software programs that measure fluorescence intensity of documented images. We have quantified IR-induced apoptosis in the neural tissue, a method we have described in detail elsewhere10. Depending on the experiment, quantitative analysis of activated-Caspase 3 may require further manipulation of embryos, such as flat-mounting, to obtain proper orientation for optimal tissue analysis. In addition, the linearity of the analysis will depend on the thickness of the tissue being analyzed. For instance, we analyzed IR-induced apoptosis in neural tissue by measuring active-Caspase 3 immunofluorescence in the shallow neural tissue of the spinal cord rather than the neuron-dense tissue of the brain4,10.
In our experience, the Casp3 assay is the most robust and reliable assay available to analyze apoptosis in zebrafish embryos between the 4-cell stage and 32 hpf when analysis requires ample time for documentation. When appropriate antibodies or transgenic lines are available to identify specific cells, this assay is also highly amenable to colabeling to identify the specific cell types undergoing apoptosis.

Here we describe how to perform whole-mount immunofluorescence in early zebrafish embryos to detect cells with activated Caspase 3 (referred to hereafter as the Casp3 assay). The overall goal of this method is to identify the relative abundance and location of apoptotic cells in zebrafish from the 4-cell stage to 32 hr-post-fertilization (hpf).
Both intrinsic (mitochondria-mediated) and extrinsic (death-receptor-mediated) apoptotic pathways mediate cell death through activation of the caspase cascade1-2. Initiator caspases normally exist as monomers within the cell, and once recruited to pathway-specific platforms in response to a pro-apoptotic signal, they become activated dimers. Activated initiator caspases (Caspase 9; intrinsic pathway, and Caspase 8; extrinsic pathway) then target the predimerized, inactive effector caspases (Caspase 3, 6, 7) for cleavage to form active heterotetramers. Active effector caspases then cleave cellular targets with specific tetrapeptide residues to initiate the specific proteolytic destruction that culminates in the ultrastructural hallmarks of apoptosis, such as chromatin condensation and membrane blebbing, and cell surface signals that mediate packaging of the cell for engulfment by phagocytes in an immune silent manner. In mammalian cells, active effector caspases are thought to perform the majority of cellular cleavage events that mediate apoptosis through both the intrinsic and extrinsic pathways1-2. The protocol described herein uses an antibody that specifically binds the cleaved, heterotetrameric form of Caspase 3, but not the inactive Caspase 3 dimer.
One of the advantages of the Casp3 assay is the ability to visualize the spatial distribution of apoptotic cells within the context of the whole embryo. Therefore, tissues of interest can be examined for the presence of apoptotic cells, and if antibodies or fluorescent transgenic strains exist that label specific cell types, then it is possible to pinpoint the exact identity of cells undergoing apoptosis through colabeling experiments. Several groups have successfully used activated Caspase 3 as a marker for apoptosis in zebrafish embryos (e.g. 3-7). Additional whole-mount techniques to identify apoptotic cells in zebrafish embryos include the TUNEL assay8 and acridine orange (AO) staining9. We have used all three methods to identify apoptotic cells in zebrafish embryos4,6,10.
TUNEL (Terminal deoxynucleotidyl transferase dUTP nick end labeling) staining takes advantage of the Terminal deoxynucleotidyl Transferase (TdT) enzyme that is used to add nucleotides to 3&#8217; hydroxyl ends of DNA during VDJ recombination in lymphocytes11. TdT adds dUTP-biotin to free 3&#8217; hydroxyl groups in the DNA, which are abundant primarily in apoptotic cells. Tissues are then exposed to avidin-peroxidase, and apoptotic cells are stained upon addition of the substrate 3-amino-9-ethylcarbazole. The TUNEL assay was used to perform an extensive analysis of apoptotic cells during embryonic development in wild-type zebrafish tissues12. Similar to the Casp3 assay, the TUNEL assay is only performed on fixed embryos. We have found the Casp3 assay to be more consistent and less expensive than the TUNEL assay.
AO staining was first described as a mechanism to specifically identify apoptotic cells in Drosophila13. AO stains both the cytoplasm and nucleus of apoptotic, but not necrotic, cells. AO is well known to bind nucleic acids14, and this is thought to account for the nuclear staining. However, AO does not stain the chromatin of live cells; rather, it appears that specific changes occurring during apoptosis permit intercalation and staining of condensed apoptotic nuclei15. AO staining has the advantage of rapid apoptotic analysis of live embryos. However, documentation of samples must be performed quickly due to the dynamic nature of apoptotic cell formation and clearance. On the other hand, simultaneous fixation of all samples provides a snapshot of apoptosis at a given time across all samples and is not subject to this temporal variable. Thus, since analysis of apoptotic cells by AO staining is not compatible with fixed embryos, the Casp3 assay is preferable for experiments in which photographic documentation and/or quantitation is required across multiple samples.

<table border="0" cellpadding="0" cellspacing="0" width="758">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">1.5 ml tubes&#160;</td>
			<td style="width:104px;">Denville Scientific</td>
			<td style="width:79px;">c2170</td>
			<td style="width:347px;">Nonhazardous. Any similar 1.5 m plastic tubes will suffice.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">10x Phosphate Buffered Saline (PBS)</td>
			<td>Sigma Aldrich</td>
			<td>P5493</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">a-activated-human-Caspase-3 antibody</td>
			<td>Fisher Scientific</td>
			<td>BDB559565</td>
			<td style="width:347px;">May be harmful if inhaled or swallowed.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">a-GFP monoclonal antibody (mouse)</td>
			<td>Life Technologies</td>
			<td>33-2600</td>
			<td style="width:347px;">May be harmful if inhaled or swallowed.</td>
		</tr>
		<tr height="31">
			<td height="31" style="height:31px;width:228px;">a-HuC/HuD human neuronal protein, mouse IgG2b, monoclonal 16A11 - UNCONJ</td>
			<td>Life Technologies</td>
			<td>A21271</td>
			<td style="width:347px;">May be harmful if inhaled or swallowed.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Albumin, Bovine BSA Heat Shock Isolation&#160;</td>
			<td>Amresco</td>
			<td>CAS 9048-46-8</td>
			<td style="width:347px;">Nonhazardous. Can also be purchased through Bioexpress: 0332-1006</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Alexa Fluor 488 Donkey anti-mouse IgG</td>
			<td>Life Technologies</td>
			<td>A11029</td>
			<td style="width:347px;">Use at 1:200 dilution.&#160; May be harmful if inhaled or swallowed.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Alexa Fluor 488 Donkey anti-Rabbit IgG</td>
			<td>Life Technologies</td>
			<td>A21206</td>
			<td style="width:347px;">Use at 1:200 dilution.&#160; May be harmful if inhaled or swallowed.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Alexa Fluor 568 Donkey anti-Rabbit IgG</td>
			<td>Life Technologies</td>
			<td>A10042</td>
			<td style="width:347px;">Use at 1:200 dilution.&#160; May be harmful if inhaled or swallowed.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Dimethyl Sulfoxide (DMSO)</td>
			<td>Sigma Aldrich</td>
			<td>D8418</td>
			<td style="width:347px;">Flammable.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Dumont #5 Inox Forceps (standard tips/straight)</td>
			<td>Fine Science Tools</td>
			<td>11251-20</td>
			<td style="width:347px;">Sharp!</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">FBS HyClone Fetal Bovine Serum&#160;</td>
			<td>Thermo-Fisher</td>
			<td>SH3091003</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Fisher Scientific Ocelot Rotator</td>
			<td>Fisher Scientific</td>
			<td>05-450-21</td>
			<td style="width:347px;">Any rotator with manual speed control is suitable.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Instant Ocean Aquarium Salt&#160;</td>
			<td>Petco</td>
			<td>1373684</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Methanol (acetone-free)</td>
			<td>Sigma Aldrich</td>
			<td>M1775</td>
			<td style="width:347px;">Flammable: toxic by inhalation, ingestion and contact.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Methylcellulose</td>
			<td>Sigma Aldrich</td>
			<td>M0387-1006</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Paraformaldehyde</td>
			<td>Sigma Aldrich</td>
			<td>P6148</td>
			<td style="width:347px;">Flammable: toxic by inhalation, ingestion and contact.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Probe (Angled 80 Short/15.5cm/0.15mm tip diameter)</td>
			<td>Fine Science Tools</td>
			<td>10140-02</td>
			<td style="width:347px;">Sharp!</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Pronase</td>
			<td>Roche</td>
			<td>11459643001</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Pyrex Spot Plate</td>
			<td>Fisher Scientific</td>
			<td>13-748B</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Transfer Pipets, Samco general purpose</td>
			<td>Thermo-Scientific</td>
			<td>204</td>
			<td style="width:347px;">Nonhazardous.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Triton X-100</td>
			<td>Sigma Aldrich</td>
			<td>T8787</td>
			<td style="width:347px;">Irritant: harmful by ingestion or contact.</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:228px;">Tween-20</td>
			<td>Sigma Aldrich</td>
			<td>P7949</td>
			<td style="width:347px;">Nonhazardous. Other brands include VWR #97063-872.</td>
		</tr>
	</tbody>
</table>

analysis of apoptosis in zebrafish embryos by whole-mount immunofluorescence to detect activated caspase 3

Whole-mount immunofluorescence to detect activated Caspase 3 (Casp3 assay) is useful to identify cells undergoing either intrinsic or extrinsic apoptosis in zebrafish embryos. The whole-mount analysis provides spatial information in regard to tissue specificity of apoptosing cells, although sectioning and/or colabeling is ultimately required to pinpoint the exact cell types undergoing apoptosis. The whole-mount Casp3 assay is optimized for analysis of fixed embryos between the 4-cell stage and 32 hr-post-fertilization and is useful for a number of applications, including analysis of zebrafish mutants and morphants, overexpression of mutant and wild-type mRNAs, and exposure to chemicals. Compared to acridine orange staining, which can identify apoptotic cells in live embryos in a matter of hours, Casp3 and TUNEL assays take considerably longer to complete (2-4 days). However, because of the dynamic nature of apoptotic cell formation and clearance, analysis of fixed embryos ensures accurate comparison of apoptotic cells across multiple samples at specific time points. We have also found the Casp3 assay to be superior to analysis of apoptotic cells by the whole-mount TUNEL assay in regard to cost and reliability. Overall, the Casp3 assay represents a robust, highly reproducible assay in which to analyze apoptotic cells in early zebrafish embryos.

The Casp3 assay gives clear evidence of apoptotic cells from the 4-cell stage to 32 hpf. Figure 2A shows that injection of embryos with high concentrations of mRNA encoding potent pro-apoptotic bh3-only proteins, such as Bim or Noxa, quickly gives rise to active-Caspase 3 by the 4-cell stage of development. Embryonic death subsequently occurs within 1 hr4. Note that intensity of fluorescence is moderate, but results are conclusive. At older stages, fluorescence intensity is more robust. For instance, Figure 2B shows bright active-Caspase 3-positive cells in sphere-stage embryos that have been injected with moderately toxic levels4 of mRNA encoding the pro-apoptotic bh3-only gene puma. Messenger RNA encoding the anti-apoptotic bcl-2 gene was coinjected to prove that injection of puma mRNA induces apoptosis through the intrinsic, mitochondria-mediated pathway.
IR-induced apoptosis in zebrafish requires p53-mediated transcription of bh3-only genes such as puma5-6. The delay in IR-induced apoptosis in Figure 3 is consistent with the requirement for p53-mediated transcription.
The Casp3 protocol should give rise to a robust signal-to-noise ratio. Figure 4 compares the optimal Casp3 assay result to two common suboptimal results that arise when critical steps are compromised (see Discussion): A&#160;weak signal-to-noise ratio due to background fluorescence in animal tissue and yolk fluorescence that distracts from the signal-of-interest.
Colabeling experiments using transgenic GFP-expressing lines approximate tissues undergoing apoptosis (Figure 5).
<img alt="Figure 1" fo:content-width="3in" fo:src="/files/ftp_upload/51060/51060fig1highres.jpg" src="/files/ftp_upload/51060/51060fig1.jpg" /> 
Figure 1. Simplified schematic of the Casp3 protocol.
<img alt="Figure 2" fo:content-width="5in" fo:src="/files/ftp_upload/51060/51060fig2highres.jpg" src="/files/ftp_upload/51060/51060fig2.jpg" /> 
Figure 2. (A) Analysis of apoptosis in 4-cell stage embryos. Embryos were injected at the one-cell stage of development with 50 pg of mRNA encoding egfp (control) or the pro-apoptotic bh3-only genes bim and noxa. At the 4-cell stage (approximately one hr-post-injection, hpi), embryos were analyzed by immunofluorescence to detect activated Caspase 3. Bim and noxa mRNA induce rapid apoptosis in zebrafish embryos immediately following injection which, if embryos are left to develop, leads to death by 2 hpi4. A brightfield image of a wild-type 4-cell stage embryo is shown for comparison. (B) Analysis of apoptosis in sphere-stage zebrafish embryos. Embryos were injected at the one-cell stage of development with mRNA encoding either 50 pg egfp (control), 5 pg puma plus 45 pg egfp (puma), or 5 pg puma plus 45 pg bcl-2 (bcl-2). At sphere stage (approximately 4 hpi), embryos were analyzed by the Casp3 assay. Both lateral and animal pole views are shown to visualize apoptotic cells. Rescue of puma-induced apoptosis by bcl-2 indicates that injection of puma mRNA induces apoptosis specifically through the intrinsic, mitochondria-mediated pathway. A brightfield image of a wild-type sphere-stage embryo is shown for comparison.
<img alt="Figure 3" fo:content-width="5in" fo:src="/files/ftp_upload/51060/51060fig3highres.jpg" src="/files/ftp_upload/51060/51060fig3.jpg" /> 
Figure 3. Time course of ionizing radiation (IR)-induced apoptosis between 17-20 hpf. Zebrafish embryos were irradiated with 8 Gy IR at 17 hpf and analyzed at 0, 1.5, 2, and 3 hr-post-IR (hpIR) by the Casp3 assay. Arrows at 20 hpf show accumulation of apoptotic cells in the spinal cord at 3 hpIR. A brightfield image of a 17-hpf embryo is shown for comparison.
<img alt="Figure 4" fo:content-width="4in" fo:src="/files/ftp_upload/51060/51060fig4highres.jpg" src="/files/ftp_upload/51060/51060fig4.jpg" /> 
Figure 4. Optimal and sub-optimal Casp3 immunofluorescence results on 27-hpf embryos. Zebrafish embryos were irradiated (or not) at 24 hpf with 15 Gy and analyzed by the Casp3 assay. The "optimal" group shows ideal results in which apoptotic cells brightly fluoresce, and nonapoptotic cells and the yolk show minimal background fluorescence.&#160; Arrows in the &#8220;background fluorescence in control&#8221; group denote excessive background fluorescence in the animal tissue of control embryos. Asterisks in the &#8220;yolk fluorescence&#8221; group demonstrate excessive nonspecific fluorescence in the yolk.
<img alt="Figure 5" fo:content-width="5in" fo:src="/files/ftp_upload/51060/51060fig5highres.jpg" src="/files/ftp_upload/51060/51060fig5.jpg" /> 
Figure 5. Colabeling experiments approximate tissue specificity of IR-induced apoptosis. The Tg(olig2:egfp)vu12 transgenic line labels motor neurons and oligodendrocytes17, and the Tg(elavl3:egfp) line labels all differentiating neurons18. Each transgenic line was irradiated with 15 Gy at 24 hpf and analyzed 3 hr later using both mouse anti-GFP and rabbit anti-active-Caspase 3 primary antibodies, followed by green- and red-fluorescing secondary antibodies, respectively. A magnification of the spinal cord (located dorsal to the end of the yolk extension of 27-hpf, 3-hpIR embryos) is shown. Apoptotic cells appear to be partially localized to both Tg(elavl3:egfp) and Tg(olig2:egfp)vu12 populations (see arrowheads in overlay), suggesting that neurons and oligodendrocytes are sensitive to IR-induced apoptosis.

Watch this Scientific Journal Video about Analysis of Apoptosis in Zebrafish Embryos by Whole-mount Immunofluorescence to Detect Activated Caspase 3 at JoVE.com

Analysis of Apoptosis in Zebrafish Embryos by Whole-mount Immunofluorescence to Detect Activated Caspase 3

Certain genetic perturbations or exposure to toxins can disrupt normal developmental processes leading to death of specific cell types. The analysis of activated Caspase 3 by whole-mount immunofluorescence in zebrafish embryos reveals stage- and tissue-specific localization of cells specifically undergoing apoptosis.

活性化カスパーゼ3を検出するために、ホールマウント免疫蛍光法によりゼブラフィッシュ胚におけるアポトーシスの分析

Whole-mount immunofluorescence to detect activated Caspase 3 (Casp3 assay) is useful to identify cells undergoing either intrinsic or extrinsic apoptosis ...

analysis-apoptosis-zebrafish-embryos-whole-mount-immunofluorescence

Research

JoVE Journal

Biology

19.6K ビュー.  University of Utah. Certain genetic perturbations or exposure to toxins can disrupt normal developmental processes leading to death of specific cell types. The analysis of activated Caspase 3 by whole-mount immunofluorescence in zebrafish embryos reveals stage- and tissue-specific localization of cells specifically undergoing apoptosis.

ビデオ: Analysis of Apoptosis in Zebrafish Embryos by Whole-mount Immunofluorescence to Detect Activated Caspase 3

Double Whole Mount in situ Hybridization of Early Chick Embryos

The chick embryo is a valuable tool in the study of early embryonic development. Its transparency, accessibility and ease of manipulation, make it an ideal tool for studying  gene expression in brain, neural tube, somite and heart primordia formation. This video demonstrates the different steps in 2-color whole mount in situ hybridization; First, the embryo is dissected from the egg and fixed in paraformaldehyde. Second, the embryo is processed for prehybridization. The embryo is then hybridized with two different probes, one coupled to DIG, and one coupled to FITC.  Following overnight hybridization, the embryo is incubated with DIG coupled antibody. Color reaction for DIG substrate is performed, and the region of interest appears blue. The embryo is then incubated with FITC coupled antibody. The embryo is processed for color reaction with FITC, and the region of interest appears red. Finally, the embryo is fixed and processed for phtograph and sectioning. A troubleshooting guide is also presented.

This video demonstrates 2-color whole mount in situ hybridization, a method by which the spatial and temporal expression pattern of 2 different genes can be visualized in young chick embryos. This method was originally introduced by David Wilkinson, Domingos Henrique, Phil Ingham and David Ish -Horowicz.

初期のニワトリ胚のin situハイブリダイゼーションダブルホールマウント

The chick embryo is a valuable tool in the study of early embryonic development. Its transparency, accessibility and ease of manipulation, make it an ...

生物学

Method for Whole Mount Antibody Staining in Chick

The chick embryo is a valuable tool in the study of early embryonic development. Its transparency, accessibility and ease of manipulation, make it an ideal tool for studying antibody expression in developing brain, neural tube and somite. This video demonstrates the different steps in whole-mount antibody staining using HRP conjugated secondary antibodies; First, the embryo is dissected from the egg and fixed in paraformaldehyde. Second, endogenous peroxidase is inactivated; The embryo is then exposed to primary antibody. After several washes, the embryo is incubated with secondary antibody conjugated to HRP. Peroxidase activity is revealed using reaction with diaminobenzidine substrate. Finally, the embryo is fixed and processed for photography and sectioning. The advantage of this method over the use of fluorescent antibodies is that embryos can be processed for wax sectioning, thus enabling the study of antigen sites in cross section. This method was originally introduced by Jane Dodd and Tom Jessell 1.

This video demonstrates whole mount immunohistochemistry, a method by which the spatial and temporal expression pattern of an antigen can be visualized in young chick embryos. This method was originally introduced by Jane Dodd and Tom Jessell.

チックの全マウントの抗体染色のための方法

Zebrafish Whole Mount High-Resolution Double Fluorescent In Situ Hybridization

Whole mount in situ hybridization is one of the most widely used techniques in developmental biology. Here, we present a high-resolution double fluorescent in situ hybridization protocol for analyzing the precise expression pattern of a single gene and for determining the overlap of the expression domains of two genes. The protocol is a modified version of the standard in situ hybridization using alkaline phosphatase and substrates such as NBT/BCIP and Fast Red 1,2. This protocol utilizes standard digoxygenin and fluorescein labeled probes along with tyramide signal amplification (TSA) 3. The commercially available TSA kits allow flexible experimental design as fluorescence emission from green to far-red can be used in combination with various nuclear stains, such as propidium iodide, or fluorescence immunohistochemistry for proteins. TSA produces a reactive fluorescent substrate that quickly covalently binds to moieties, typically tyrosine residues, in the immediate vicinity of the labeled antisense riboprobe. The resulting staining patterns are high resolution in that subcellular localization of the mRNA can be observed using laser scanning confocal microscopy 3,4. One can observe nascent transcripts at the chromosomal loci, distinguish nuclear and cytoplasmic staining and visualize other patterns such as cortical localization of mRNA. Studies in Drosophila indicate that roughly 70% of mRNAs exhibit specific patterns of subcellular localization that frequently correlate with the function of the encoded protein 5. When combined with computer-aided reconstruction of 3D confocal datasets, our protocol allows the detailed analysis of mRNA distribution with sub-cellular resolution in whole vertebrate embryos.

Zebrafish Whole Mount High-Resolution Double Fluorescent In Situ Hybridization

Whole mount in situ hybridization is one of the most widely used techniques in developmental biology. Here, we present a high-resolution double fluorescent in situ hybridization protocol for analyzing the precise expression pattern of a single gene and for determining the overlap of the expression domains of two genes. We include a propidium iodide nuclear counter-stain to highlight tissue organization.

ゼブラフィッシュの全マウント高分解能二重蛍光上皮内ハイブリダイゼーション

Whole mount in situ hybridization is one of the most widely used techniques in developmental biology.  Here, we present a high-resolution double ...

Generating Chimeric Zebrafish Embryos by Transplantation

One of the most powerful tools used to gain insight into complex developmental processes is the analysis of chimeric embryos. A chimera is defined as an organism that contains cells from more than one animal; mosaics are one type of chimera in which cells from more than one genotype are mixed, usually wild-type and mutant. In the zebrafish, chimeras can be readily made by transplantation of cells from a donor embryo into a host embryo at the appropriate embryonic stage. Labeled donor cells are generated by injection of a lineage marker, such as a fluorescent dye, into the one-cell stage embryo. Labeled donor cells are removed from donor embryos and introduced into unlabeled host embryos using an oil-controlled glass pipette mounted on either a compound or dissecting microscope. Donor cells can in some cases be targeted to a specific region or tissue of the developing blastula or gastrula stage host embryo by choosing a transplantation site in the host embryo based on well-established fate maps.

A step-by-step guide to generating targeted chimeric zebrafish embryos by transplantation at the blastula or gastrula stage.

移植によるキメラゼブラフィッシュ胚の生成

One of the most powerful tools used to gain insight into complex developmental processes is the analysis of chimeric embryos. A chimera is defined as an ...

Activation of Apoptosis by Cytoplasmic Microinjection of Cytochrome c

Apoptosis, or programmed cell death, is a conserved and highly regulated pathway by which cells die1. Apoptosis can be triggered when cells encounter a wide range of cytotoxic stresses. These insults initiate signaling cascades that ultimately cause the release of cytochrome c from the mitochondrial intermembrane space to the cytoplasm2. The release of cytochrome c from mitochondria is a key event that triggers the rapid activation of caspases, the key cellular proteases which ultimately execute cell death3-4.
The pathway of apoptosis is regulated at points upstream and downstream of cytochrome c release from mitochondria5. In order to study the post-mitochondrial regulation of caspase activation, many investigators have turned to direct cytoplasmic microinjection of holocytochrome c (heme-attached) protein into cells6-9. Cytochrome c is normally localized to the mitochondria where attachment of a heme group is necessary to enable it to activate apoptosis10-11. Therefore, to directly activate caspases, it is necessary to inject the holocytochrome c protein instead of its cDNA, because while the expression of cytochrome c from cDNA constructs will result in mitochondrial targeting and heme attachment, it will be sequestered from cytosolic caspases. Thus, the direct cytosolic microinjection of purified heme-attached cytochrome c protein is a useful tool to mimic mitochondrial cytochrome c release and apoptosis without the use of toxic insults which cause cellular and mitochondrial damage.
In this article, we describe a method for the microinjection of cytochrome c protein into cells, using mouse embryonic fibroblasts (MEFs) and primary sympathetic neurons as examples. While this protocol focuses on the injection of cytochrome c for investigations of apoptosis, the techniques shown here can also be easily adapted for microinjection of other proteins of interest.

Activation of Apoptosis by Cytoplasmic Microinjection of Cytochrome c

In this protocol, we describe the direct cytoplasmic microinjection of cytochrome c protein into fibroblasts and primary sympathetic neurons. This technique allows for the introduction of cytochrome c protein into the cytoplasm of cells and mimics the release of cytochrome c from mitochondria, which occurs during apoptosis.

シトクロムの細胞質マイクロインジェクションによるアポトーシスの活性化 C</em

Apoptosis, or programmed cell death, is a conserved and highly regulated pathway by which cells die1.  Apoptosis can be triggered when cells encounter a ...

Whole Mount in Situ Hybridization of E8.5 to E11.5 Mouse Embryos

Whole mount in situ hybridization is a very informative approach for defining gene expression patterns in embryos. The in situ hybridization procedures are lengthy and technically demanding with multiple important steps that collectively contribute to the quality of the final result. This protocol describes in detail several key quality control steps for optimizing probe labeling and performance. Overall, our protocol provides a detailed description of the critical steps necessary to reproducibly obtain high quality results. First, we describe the generation of digoxygenin (DIG) labeled RNA probes via in vitro transcription of DNA templates generated by PCR. We describe three critical quality control assays to determine the amount, integrity and specific activity of the DIG-labeled probes. These steps are important for generating a probe of sufficient sensitivity to detect endogenous mRNAs in a whole mouse embryo. In addition, we describe methods for the fixation and storage of E8.5-E11.5 day old mouse embryos for in situ hybridization. Then, we describe detailed methods for limited proteinase K digestion of the rehydrated embryos followed by the details of the hybridization conditions, post-hybridization washes and RNase treatment to remove non-specific probe hybridization. An AP-conjugated antibody is used to visualize the labeled probe and reveal the expression pattern of the endogenous transcript. Representative results are shown from successful experiments and typical suboptimal experiments.

Whole Mount in Situ Hybridization of E8.5 to E11.5 Mouse Embryos

This whole mount in situ hybridization protocol discusses critical steps that ensure reproducible high quality results for gene expression studies in E8.5-E11.5 day old mouse embryos.

全体のマウント<em&gt;上皮内</emE11.5マウス胚へのE8.5&gt;ハイブリダイゼーション

Whole mount in situ hybridization is a very informative approach for defining gene expression patterns in embryos. The in situ hybridization procedures ...

Metabolic Profile Analysis of Zebrafish Embryos

A growing goal in the field of metabolism is to determine the impact of genetics on different aspects of mitochondrial function. Understanding these relationships will help to understand the underlying etiology for a range of diseases linked with mitochondrial dysfunction, such as diabetes and obesity. Recent advances in instrumentation, has enabled the monitoring of distinct parameters of mitochondrial function in cell lines or tissue explants. Here we present a method for a rapid and sensitive analysis of mitochondrial function parameters in vivo during zebrafish embryonic development using the Seahorse bioscience XF 24 extracellular flux analyser. This protocol utilizes the Islet Capture microplates where a single embryo is placed in each well, allowing measurement of bioenergetics, including: (i) basal respiration; (ii) basal mitochondrial respiration (iii) mitochondrial respiration due to ATP turnover; (iv) mitochondrial uncoupled respiration or proton leak and (iv) maximum respiration. Using this approach embryonic zebrafish respiration parameters can be compared between wild type and genetically altered embryos (mutant, gene over-expression or gene knockdown) or those manipulated pharmacologically. It is anticipated that dissemination of this protocol will provide researchers with new tools to analyse the genetic basis of metabolic disorders in vivo in this relevant vertebrate animal model.

Zebrafish represent a powerful vertebrate model that has been under-utilised for metabolic studies. Here we describe a rapid way to measure the in vivo metabolic profile of developing zebrafish that allows the comparison of different mitochondrial function parameters between genetically or pharmacologically manipulated embryos, thereby increasing the applicability of this organism.

ゼブラフィッシュ胚の代謝プロファイル解析

A growing goal in the field of metabolism is to determine the impact of genetics on different aspects of mitochondrial function. Understanding these ...

Whole Mount RNA Fluorescent in situ Hybridization of Drosophila Embryos

Assessing the expression pattern of a gene, as well as the subcellular localization properties of its transcribed RNA, are key features for understanding its biological function during development. RNA in situ hybridization (RNA-ISH) is a powerful method used for visualizing RNA distribution properties, be it at the organismal, cellular or subcellular levels 1. RNA-ISH is based on the hybridization of a labeled nucleic acid probe (e.g. antisense RNA, oligonucleotides) complementary to the sequence of an mRNA or a non-coding RNA target of interest 2. As the procedure requires primary sequence information alone to generate sequence-specific probes, it can be universally applied to a broad range of organisms and tissue specimens 3. Indeed, a number of large-scale ISH studies have been implemented to document gene expression and RNA localization dynamics in various model organisms, which has led to the establishment of important community resources 4-11. While a variety of probe labeling and detection strategies have been developed over the years, the combined usage of fluorescently-labeled detection reagents and enzymatic signal amplification steps offer significant enhancements in the sensitivity and resolution of the procedure 12. Here, we describe an optimized fluorescent in situ hybridization method (FISH) employing tyramide signal amplification (TSA) to visualize RNA expression and localization dynamics in staged Drosophila embryos. The procedure is carried out in 96-well PCR plate format, which greatly facilitates the simultaneous processing of large numbers of samples.

Whole Mount RNA Fluorescent in situ Hybridization of Drosophila Embryos

Here we describe a whole-mount fluorescent in situ hybridization (FISH) protocol for determining the expression and localization properties of RNAs expressed during embryogenesis in the fruit fly, Drosophila melanogaster.

ホールマウントRNAを蛍光<em&gt;その場で</emの&gt;ハイブリダイゼーション<em&gt;ショウジョウバエ</em&gt;胚

Assessing  the expression pattern of a gene, as well as the subcellular localization  properties of its transcribed RNA, are key features for ...

RNA In situ Hybridization in Whole Mount Embryos and Cell Histology Adapted for Marine Elasmobranchs

Marine elasmobranchs are valued animal models for biomedical and genomic studies as they are the most primitive vertebrates to have adaptive immunity and have unique mechanisms for osmoregulation 1-3. As the most primitive living jawed-vertebrates with paired appendages, elasmobranchs are an evolutionarily important model, especially for studies in evolution and development. Marine elasmobranchs have also been used to study aquatic toxicology and stress physiology in relationship to climate change 4. Thus, development and adaptation of methodologies is needed to facilitate and expand the use of these primitive vertebrates to multiple biological disciplines. Here I present the successful adaptation of RNA whole mount in situ hybridization and histological techniques to study gene expression and cell histology in elasmobranchs.
Monitoring gene expression is a hallmark tool of developmental biologists, and is widely used to investigate developmental processes 5. RNA whole mount in situ hybridization allows for the visualization and localization of specific gene transcripts in tissues of the developing embryo. The expression pattern of a gene's message can provide insight into what developmental processes and cell fate decisions a gene may control. By comparing the expression pattern of a gene at different developmental stages, insight can be gained into how the role of a gene changes during development.
While whole mount in situ's provides a means to localize gene expression to tissue, histological techniques allow for the identification of differentiated cell types and tissues. Histological stains have varied functions. General stains are used to highlight cell morphology, for example hematoxylin and eosin for general staining of nuclei and cytoplasm, respectively. Other stains can highlight specific cell types. For example, the alcian blue stain reported in this paper is a widely used cationic stain to identify mucosaccharides. Staining of the digestive tract with alcian blue can identify the distribution of goblet cells that produce mucosaccharides. Variations in mucosaccharide constituents on short peptides distinguish goblet cells by function within the digestive tract 6. By using RNA whole mount in situ's and histochemical methods concurrently, cell fate decisions can be linked to gene-specific expression.
Although RNA in situ's and histochemistry are widely used by researchers, their adaptation and use in marine elasmobranchs have met limited and varied success. Here I present protocols developed for elasmobranchs and used on a regular basis in my laboratory. Although further modification of the RNA in situ's hybridization method may be needed to adapt to different species, the protocols described here provide a strong starting point for researchers wanting to adapt the use of marine elasmobranchs to their scientific inquiries.

RNA In situ Hybridization in Whole Mount Embryos and Cell Histology Adapted for Marine Elasmobranchs

By combining methods for RNA whole mount in situ hybridization and histology, gene expression can be linked with cell fate decisions in the developing embryo. These methods have been adapted to marine elasmobranchs and facilitate the use of these animals as model organisms for biomedical, toxicology and comparative studies.

RNAを<em&gt;その場</emホールマウント胚および細胞組織学で&gt;ハイブリダイゼーションは、海洋軟骨魚類に適合した

Marine  elasmobranchs are valued animal models for biomedical and genomic studies as  they are the most primitive vertebrates to have adaptive immunity ...

High Resolution Whole Mount In Situ Hybridization within Zebrafish Embryos to Study Gene Expression and Function

This article focuses on whole-mount in situ hybridization (WISH) of zebrafish embryos. The WISH technology facilitates the assessment of gene expression both in terms of tissue distribution and developmental stage. Protocols are described for the use of WISH of zebrafish embryos using antisense RNA probes labeled with digoxigenin. Probes are generated by incorporating digoxigenin-linked nucleotides through in vitro transcription of gene templates that have been cloned and linearized. The chorions of embryos harvested at defined developmental stages are removed before incubation with specific probes. Following a washing procedure to remove excess probe, embryos are incubated with anti-digoxigenin antibody conjugated with alkaline phosphatase. By employing a chromogenic substrate for alkaline phosphatase, specific gene expression can be assessed. Depending on the level of gene expression the entire procedure can be completed within 2-3 days.

High Resolution Whole Mount In Situ Hybridization within Zebrafish Embryos to Study Gene Expression and Function

The zebrafish, a small tropical fish, has become a popular model for studying gene function during vertebrate development and disease. The temporal and spatial expression of target genes can be determined by in situ hybridization. Our improved protocol allows for the detection of low abundant transcripts with low non-specific background signal.

高解像度全マウント<em&gt;その場で</em遺伝子発現と機能を研究するためにゼブラフィッシュ胚内&gt;ハイブリダイゼーション

This article focuses on whole-mount in situ hybridization (WISH) of zebrafish embryos. The WISH technology facilitates the assessment of gene expression ...