cardiac-muscle-cell-based-actuator-self-stabilizing-biorobot-part

Cardiac Muscle-cell Based Actuator and Self-stabilizing Biorobot - PART 1

Biological machines often referred to as biorobots, are living cell- or tissue-based devices that are powered solely by the contractile activity of living ...

Cardiac Muscle Cell-based Actuator and Self-stabilizing Biorobot - Part 2

In recent years, hybrid devices that consist of a living cell or tissue component integrated with a synthetic mechanical backbone have been developed. ...

Louisiana State University

Biorobots that harness the power generated by living muscle cells have recently gained interest as an alternative to traditional mechanical robots. However, robust and reliable operation of these biorobots still remains a challenge. Toward this end, we developed a self-stabilizing swimming biorobot that can maintain its submersion depth, pitch, and roll without external intervention. The biorobot developed in this study utilized a fin-based propulsion mechanism. It consisted of a base made from two composite PDMS materials and a thin PDMS cantilever seeded with a confluent layer of heart muscle cells. The characterization of the heart muscle cell sheet revealed the gradual increase of the dynamic contraction force and the static cell traction force, which was accompanied by a linear increase in the expression levels of contractile and cytoskeletal proteins. In the design of the biorobot, instead of relying only on the geometry, we used two composite PDMS materials whose densities were modulated by adding either microballoons or nickel powder. The use of two materials with different mass densities enabled precise control of the weight distribution to ensure a positive restoration force on the biorobot tilted at any angle. The developed biorobot exhibited unique propulsion modes depending on the resting angle of its "fin" or the cantilever, and achieved a maximum velocity of 142 μm s(-1). The technique described in this study to stabilize and propel the biorobot can pave the way for novel developments in biorobotics.

Development and characterization of muscle-based actuators for self-stabilizing swimming biorobots.

Self-folding or micro-origami technologies are actively investigated as a novel manufacturing process to fabricate three-dimensional macro/micro-structures. In this paper, we present a simple process to produce a self-folding structure with a biaxially oriented polystyrene sheet (BOPS) or Shrinky Dinks. A BOPS sheet is known to shrink to one-third of its original size in plane, when it is heated above 160 °C. A grid pattern is engraved on one side of the BOPS film with a laser engraver to decrease the thermal shrinkage of the engraved side. The thermal shrinkage of the non-engraved side remains the same and this unbalanced thermal shrinkage causes folding of the structure as the structure shrinks at high temperature. We investigated the self-folding mechanism and characterized how the grid geometry, the grid size, and the power of the laser engraver affect the bending curvature. The developed fabrication process to locally modulate thermomechanical properties of the material by engraving the grid pattern and the demonstrated design methodology to harness the unbalanced thermal shrinkage can be applied to develop complicated self-folding macro/micro structures.

Christian Danielson

Division of Electrical and Computer Engineering

Louisiana State University

Cardiac Muscle-cell Based Actuator and Self-stabilizing Biorobot - PART 1

Cardiac Muscle Cell-based Actuator and Self-stabilizing Biorobot - Part 2

Christian Danielson

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Division of Electrical and Computer Engineering

Louisiana State University

Cardiac Muscle-cell Based Actuator and Self-stabilizing Biorobot - PART 1

Cardiac Muscle Cell-based Actuator and Self-stabilizing Biorobot - Part 2

Division of Electrical and Computer Engineering