Core - Mechanical Engineering

Chapter 6

Structural Analysis

6.1 : Introduction to Structures

6.1 : Introduction to Structures

A structure is defined as a system of interconnected members designed to support or transfer forces and successfully withstand the loads acting on them. ...

990 viewsFree Sample

6.2 : Simple Trusses

6.2 : Simple Trusses

A truss is a structural framework consisting of slender members connected at joints, designed to support external loads while minimizing material usage ...

1.7K viewsFree Sample

6.3 : Method of Joints

6.3 : Method of Joints

The method of joints is a commonly used technique to analyze the forces in structural trusses. The method is based on the principle of equilibrium, which ...

733 viewsFree Sample

6.4 : Method of Joints: Problem Solving I

6.4 : Method of Joints: Problem Solving I

The method of joints is a commonly used technique to analyze the forces in structural trusses. The method is based on the principle of equilibrium, which ...

1.1K viewsFree Sample

6.5 : Method of Joints: Problem Solving II

6.5 : Method of Joints: Problem Solving II

Consider a truss structure with frictionless joints fixed to a wall and roller support. If a force of 150 N is applied to joint A, the forces in each ...

518 viewsFree Sample

6.6 : Zero-Force Member

6.6 : Zero-Force Member

A truss is a framework that comprises slender members connected at their ends by joints. Trusses are widely used in engineering and architecture to ...

1.4K viewsFree Sample

6.7 : Method of Sections

6.7 : Method of Sections

Consider a truss structure, as shown in the figure. Forces F1 and F2 act at joints B and D, respectively. The method of sections can be employed to ...

589 viewsFree Sample

6.8 : Method of Sections: Problem Solving I

6.8 : Method of Sections: Problem Solving I

Consider a symmetrical roof truss structure, composed of vertical, diagonal, and horizontal members. The length of each horizontal member is 4 m. The ...

510 viewsFree Sample

6.9 : Method of Sections: Problem Solving II

6.9 : Method of Sections: Problem Solving II

Consider an arbitrary truss structure composed of diagonal, vertical, and horizontal members fixed to the wall. To calculate the force acting on members ...

936 viewsFree Sample

6.10 : Space Trusses

6.10 : Space Trusses

A space truss is a three-dimensional counterpart of a planar truss. These structures consist of members connected at their ends, often utilizing ...

753 viewsFree Sample

6.11 : Space Trusses: Problem Solving

6.11 : Space Trusses: Problem Solving

A space truss is a three-dimensional counterpart of a planar truss. These structures consist of members connected at their ends, often utilizing ...

561 viewsFree Sample

6.12 : Frames

Frames are essential components of various mechanical and structural systems used daily. These structures are known for their stability and ability to ...

512 viewsFree Sample

6.13 : Frames: Problem Solving I

6.13 : Frames: Problem Solving I

Consider a jib crane with an external load suspended from the pulley. The dimensions of the crane members are shown in the figure. A systematic analysis ...

415 viewsFree Sample

6.14 : Frames: Problem Solving II

6.14 : Frames: Problem Solving II

Consider a hydraulic hoist supporting a load of 1 kN. Assuming a simplified schematic representation of this frame structure, the force acting on BD and ...

196 viewsFree Sample

6.15 : Machines

6.15 : Machines

Machines are complex structures consisting of movable, pin-connected multi-force members that work together to transmit forces. One example of a machine ...

249 viewsFree Sample

6.16 : Machines: Problem Solving I

6.16 : Machines: Problem Solving I

A toggle clamp is a mechanical device commonly used for holding and clamping objects in various applications, such as woodworking, metalworking, and ...

300 viewsFree Sample

6.17 : Machines: Problem Solving II

6.17 : Machines: Problem Solving II

Machines are complex structures consisting of movable, pin-connected multi-force members that work together to transmit forces. Consider a lifting tong ...

296 viewsFree Sample

Copyright © 2025 MyJoVE Corporation. 판권 소유