Consider a symmetrical roof truss structure, composed of vertical, diagonal, and horizontal members. The length of each horizontal member is 4 m. The lengths of the vertical members FB and HD are 4 m, while the length of member GC is 6 m. The loads acting at joints F, G, and H are 2 kN, while those at joints A and E are 1 kN.

Figure 1

The method of sections is employed to calculate the forces acting on members DC and HC. The moment equilibrium condition is applied to point A, and the known values of forces and distances are substituted into the moment equation.

Equation 1

This results in an estimated reaction force of 4 kN at point E. Subsequently, the vertical force equilibrium condition at point A reveals that the reaction force at A is also 4 kN.

Equation 2

Due to the symmetry of the truss, the reaction forces at points A and E are equal.

The forces acting on members DC and HC can be obtained upon determining the reaction forces. A sectional cut is made along a plane intersecting members DC, HC, and HG, and a free-body diagram of the smaller section is considered.

Figure 2

By summing the moments about point H, the force along DC is calculated to be a positive 3 kN, indicating a tensile force.

Equation 3

The force along CH is resolved into its sine and cosine components. Trigonometry is used to find the angle between member CH and the horizontal axis to be 45°. Finally, applying the moment equilibrium condition at point E yields a force of -1.41 kN for FCH.

Equation 4

In this case, the negative result signifies a compressive force acting on member CH.

Tags
Method Of SectionsRoof TrussVertical MembersDiagonal MembersHorizontal MembersForcesMoment EquilibriumReaction ForceFree body DiagramTensile ForceCompressive ForceTrigonometryAngle Resolution

장에서 6:

article

Now Playing

6.8 : Method of Sections: Problem Solving I

Structural Analysis

404 Views

article

6.1 : 구조체 소개

Structural Analysis

866 Views

article

6.2 : 심플 트러스

Structural Analysis

1.4K Views

article

6.3 : 조인트 방법

Structural Analysis

599 Views

article

6.4 : 관절 방법: 문제 해결 I

Structural Analysis

889 Views

article

6.5 : 관절 방법: 문제 해결 II

Structural Analysis

413 Views

article

6.6 : Zero-Force 멤버

Structural Analysis

1.2K Views

article

6.7 : 섹션 방법

Structural Analysis

468 Views

article

6.9 : 섹션 방법: 문제 해결 II

Structural Analysis

800 Views

article

6.10 : 공간 트러스

Structural Analysis

680 Views

article

6.11 : 공간 트러스: 문제 해결

Structural Analysis

499 Views

article

6.12 : 프레임

Structural Analysis

454 Views

article

6.13 : 프레임: 문제 해결 I

Structural Analysis

326 Views

article

6.14 : 프레임: 문제 해결 II

Structural Analysis

146 Views

article

6.15 : 기계

Structural Analysis

194 Views

See More

JoVE Logo

개인 정보 보호

이용 약관

정책

연구

교육

JoVE 소개

Copyright © 2025 MyJoVE Corporation. 판권 소유