October 3rd, 2018
•Two 'Combined Stress test with in situ measurement' setups, which allow real-time monitoring of accelerated degradation of solar cells and modules, were designed and constructed. These setups allow the simultaneous use of humidity, temperature, electrical biases, and illumination as independently controlled stress factors. The setups and various experiments executed are presented.
Related Videos
Atom Probe Tomography Studies on the Cu(In,Ga)Se2 Grain Boundaries
Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing
Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Digital Printing of Titanium Dioxide for Dye Sensitized Solar Cells
Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells
Electrospinning of Photocatalytic Electrodes for Dye-sensitized Solar Cells
Well-aligned Vertically Oriented ZnO Nanorod Arrays and their Application in Inverted Small Molecule Solar Cells
Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics
Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses
Copyright © 2024 MyJoVE Corporation. 판권 소유