Isolation of Cerebrospinal Fluid from Rodent Embryos for use with Dissected Cerebral Cortical Explants

Podsumowanie

The ventricular cerebrospinal fluid (CSF) bathes the neuroepithelial and cerebral cortical progenitor cells during early brain development in the embryo. Here we describe the method developed to isolate ventricular CSF from rodent embryos of different ages in order to investigate its biological function. In addition, we demonstrate our cerebral cortical explant dissection and culture technique that allows for explant growth with minimal volumes of culture medium or CSF.

Streszczenie

The CSF is a complex fluid with a dynamically varying proteome throughout development and in adulthood. During embryonic development, the nascent CSF differentiates from the amniotic fluid upon closure of the anterior neural tube. CSF volume then increases over subsequent days as the neuroepithelial progenitor cells lining the ventricles and the choroid plexus generate CSF. The embryonic CSF contacts the apical, ventricular surface of the neural stem cells of the developing brain and spinal cord. CSF provides crucial fluid pressure for the expansion of the developing brain and distributes important growth promoting factors to neural progenitor cells in a temporally-specific manner. To investigate the function of the CSF, it is important to isolate pure samples of embryonic CSF without contamination from blood or the developing telencephalic tissue. Here, we describe a technique to isolate relatively pure samples of ventricular embryonic CSF that can be used for a wide range of experimental assays including mass spectrometry, protein electrophoresis, and cell and primary explant culture. We demonstrate how to dissect and culture cortical explants on porous polycarbonate membranes in order to grow developing cortical tissue with reduced volumes of media or CSF. With this method, experiments can be performed using CSF from varying ages or conditions to investigate the biological activity of the CSF proteome on target cells.

Wprowadzenie

The CSF is a complex fluid that bathes the developing neuroepithelium ^1-6 and provides essential pressure ⁷ and growth promoting cues for the developing brain ^8-12. To study the CSF over the course of brain development, we developed techniques to isolate ventricular CSF from developing rat or mouse embryos during various stages of development ^6,9. Previous methods of isolation included using a glass micro-needle and isolating the CSF using a micro-injector ^1,2. Our method utilizes a glass micro-capillary pipette whose tip has been pulled to create an ultrafine point for improved tissue penetration. The glass micro-capillary pipette is connected to an aspirator so that ventricular CSF collection can be controlled with gentle changes in pressure. To investigate the stem cell influences of CSF signals, we dissect cerebral cortical explants, place them on polycarbonate membranes, and float them on appropriate culture medium supplemented with CSF samples ⁹. With this technique, reduced volumes of media are sufficient to culture the tissue, allowing for an efficient use of CSF ⁹.

Protokół

1. Embryo Isolation/Preparation

This technique can be used for mouse or rat. In this protocol we demonstrate the CSF collection technique and cerebral cortical explant dissection with mouse embryonic brain. We will comment on any important differences for rats versus mice that exist within the general techniques. For the embryonic age staging system, E1 is classified as the day of the plug for rats, and E0.5 is classified as the day of the plug for mice.

1. Prepare a micro-dissection dish with Sylgard Silicone Elastomer. Sylgard 184 Silicone Elastomer is supplied as a two part liquid component, Part A and Part B. Part A and Part B are mixed in a 10:1 ratio by weight or volume. After the liquid components are mixed, pour the sylgard elastomer into a Petri dish to cover the entire surface of the dish. Some air bubbles may be present that will dissipate during the curing process. Place the Petri dish lid on and allow the elastomer to cure. The elastomer can be cured at room temperature for 24 hr, or at higher temperatures (e.g. 37 °C) for faster curing. Once the liquid components solidify, the dissection dish is ready to use. The dish can be used repeatedly for multiple experiments, provided that it is cleaned well following the procedure.
2. Preparation of the micro-capillary pipette (needle). Micro-capillary pipettes are prepared by applying heat and pull using a Narishige PC-10 vertical micropipette puller with the following settings: One step pull; Heater #2 set to 58; 100 g pull weight. The fine tip of the micropipette is carefully snapped off using fine #55 forceps. The resulting average inner diameter of the needle is 85 μm.
3. Prepare the aspirator assembly for CSF aspiration. Insert micro-plunger provided with micro-capillary pipettes into the capillary needle. Alternatively, attach a plastic disposable filter to the end of the aspirator tube assembly that is connected to the micro-capillary pipette. Push the needle through the gasket into position on the opposite end of the aspirator assembly.
4. Transfer embryo isolated from the litter to a micro-dissection dish prepared with Sylgard.
5. Remove the extra-embryonic membranes and tissues so that the embryo is clearly exposed. Each tissue layer-first the uterine wall and then the decidua-can be dissected using fine iridectomy scissors (i.e. Fine Science Tools # 15000-02). At each implantation site, first the uterine wall, then the decidua can be incised parallel to the long axis of the uterus, and the incision can then be opened further using fine forceps. The decidua can be removed after a similar incision, exposing the fetal membranes. Care should be exercised so that the fetal membranes are not incised or punctured.
6. Wash with sterile Hanks balanced salt solution (HBSS) and remove excess fluid from the surrounding embryo using a pipette as well as a kimwipe or filter paper cut into triangles.

2. Ventricular CSF Collection

1. Visualize embryo under the dissection microscope: for mouse, the embryo should be laying on its side, such that one has a sagittal view of the developing embryo. With rat embryos E16 or older, position the embryo on its dorsal spinal column, along its longest planar dimension, from a cranial to caudal direction, as if the embryo is lying on its back. In this manner the CSF can be collected from both right and left lateral ventricle.
2. Steadily insert the micro-capillary pipette into the lateral ventricle, mesencephalic ventricle, or cisterna magna, attempting not to contact the neuroepithelial cells once the pipette has been inserted. For mouse embryos E14.5 or older, the CSF can be aspirated from the right ventricle and then the needle removed and inserted into the left ventricle. Because of the patency of the ventricles and the neural tube in embryos younger than E14.5, the entire CSF volume can often be aspirated from the lateral ventricles with a single needle insertion. However, this is not always the case as developmental times and patency of the connecting ventricles may vary slightly, and therefore, the micro-capillary pipette can also be inserted into the cisterna magna to collect the maximal CSF volume.
3. Once the micro-capillary pipette is inserted into the lateral ventricle, mesencephalic ventricle, or cisterna magna, carefully and gently begin aspirating the CSF into the pipette, using either the micro-plunger to create negative pressure and aspirate the CSF, or by providing a gentle negative pressure created by mouth such that CSF starts to gently flow into the micro-capillary pipette in a slow and controlled fashion. We recommend that the viewer checks with their own local officials regarding institutional policies on these approaches.
4. Continue to apply negative pressure and collect the CSF into the micro-capillary pipette. In both mouse and rat embryos of E16.5/E17 or younger, it is possible to observe the ventricle collapse slightly by the appearance of a divot forming on the side of the head that the micro-capillary pipette is in. In older embryos, due to the larger size of the brain, it may not be possible to observe the head collapsing.
5. Stop applying pressure and gently remove the micro-capillary pipette from the lateral ventricle.
6. Gently expel the CSF sample into an Eppendorf tube that has been chilled on ice.
7. Continue collecting the CSF from an entire litter of animals and pool the samples into the same tube.
8. Centrifuge at 10,000 x g at 4 °C for 10 min to remove any contaminating cells.
9. Analyze the samples for any signs of contaminating neuroepithelial cells or red blood cells. Signs of contamination are usually indicated by the fluid appearing cloudy or red/pink, or the presence of a pellet with a blood tinged spot. After centrifugation, the CSF can be analyzed microscopically for any evidence of cells or cellular debris. If there are signs of contamination the fluid should be discarded. As an additional control, the pellet content may also be stained for cells. A clean CSF sample can be used for cell culture, cortical culture, spectrometry, western blot, ELISA, and other assays. The clear CSF should be transferred to a new sterile Eppendorf tube. The sample can now be used for analysis, pooled with other samples, or snap frozen with liquid nitrogen and stored at -80 °C. The freezing and thawing of small samples of fluid may result in a small volume decrease and changes in protein concentration. This can be avoided by freeze drying the samples.

3. Cortical Explant Dissection

1. Transfer the E14.5 embryo isolated from the litter onto a micro-dissection dish prepared with Sylgard.
2. Remove embryo from extra-embryonic membranes and tissues as described in Step 1.5.
3. Wash with sterile Hanks balanced salt solution (HBSS) and remove excess fluid from the surrounding embryo using a pipette.
4. Dissect through the cervical region separating the head from the rest of the embryo (Figure 1A).
5. Using a fine scalpel (ophthalmic knife), cut down the midline of the scalp. Grasp each side of this incision with fine forceps and remove the skin. Next, use iridectomy scissors to make an incision that runs the length of midline of the developing cranium. Subsequently, make two additional incisions, approximately 1/3 of the distance from the anterior and posterior ends of the developing skull. Use fine forceps to grasp the "flaps" of cranium that result from this part of the dissection, and remove the developing skull tissue, exposing the cortex (Figure 1B).
6. Using the scalpel bisect the brain along the midline in the mid-sagital plane, separating the right and left cortical hemispheres (Figures 1B, C). The pia and arachnoid are left attached to the cortex, and the dura is removed together with the developing skull.
7. Prepare each cortical hemisphere separately. Place the hemisphere medial side up so that you can see the ganglionic eminence and the developing cortex (Figures 1C, D).
8. Using the scalpel, make a coronal incision through the cortical neuroepithelium caudal to the developing olfactory bulb. This incision should begin at the anterior boundary of the lateral and medial ganglionic eminences, and extend through the anterior cingulate region of the developing cortical rudiment (Figure 1E).
9. Make another coronal incision just caudal to the posterior boundary of the lateral ganglionic eminence (Figure 1F). This incision should also extend from the lateral boundary of the ganglionic eminence to the medial wall of the developing cortical rudiment.
10. Retract the cortical "flap" created by the two incisions made in steps 3.7 and 3.8, using a scalpel or gentle pressure from a stream of HBSS delivered with a 200 μl pipettor to avoid mechanical damage to the cortex. Then make a transverse incision along the boundary separating the lateral ganglionic eminence from the developing cortex (Figures 1G, H). Then, dissect away the developing hippocampus and cortical hem of the medial telencephalon, at the apex of the neocortex where the lateral cortical surface meets the interhemispheric wall.
11. Make a transverse incision along the boundary separating the lateral ganglionic eminence from the developing cortex (Figure 1H).
12. Remove any extra dissected tissue that is on the Sylgard plate from the dissected cortical explant. One can use gentle pipetting with fresh HBSS buffer to pipette away any extra dissected tissue. The dissected cortex is now with meningeal side facing down (Figure 1I).

4. Transferring of Cortical Explant

1. Prepare a platinum wire loop connected to a glass pipette. Heat the glass pipette with a folded platinum wire inserted in the end of the glass pipette. By twisting the end of the platinum wire loop, the size of the loop can be increased or decreased, and the loop can be shaped to fit the size of the explant desired. (This can be prepared beforehand and reused.)
2. Heat the end of the platinum wire to sterilize the loop.
3. Isolate the dissected cortical explant and remove the extra HBSS media by gentle pipetting, leaving a small amount to use with the wire loop.
4. Place a 1 cm polycarbonate membrane in a 4 cm diameter imaging dish.
5. Using the side of the platinum wire loop, gently flip the cortex so that the meningeal side is facing up.
6. Lift the cortical explant off the dissection dish, by placing the explant in the middle of the loop and using the intrinsic hydrostatic forces to lift the explant on a flat plane.
7. Gently place the explant on the polycarbonate membrane, and lift the platinum wire loop away such that the explant remains on the membrane on a flat plane with the ventricular surface making contact with membrane.
8. Gently lift the membrane and pipette 50 μl of CSF or other media under the membrane.
9. Cover the imaging dish, place it in a humidified secondary container, and incubate at 37 °C in 5% CO₂ for 24 hr to support continued cell proliferation and explant growth. Figure 2 depicts a schematic of the final cortical explant dish preparation.

Wyniki

The CSF collection should yield a clear, transparent fluid. There should be no evidence of contamination from blood, as demonstrated by a red or yellow tinged fluid in the aspirate and in the Eppendorf tube. There should also be no evidence of tissue in the aspirate and Eppendorf tube. When the CSF is centrifuged, one can also assess the CSF microscopically to ensure that there is no contamination. If there are signs of contamination, the CSF should be discarded. From one E14.5 mouse litter, one can anticipate co...

Dyskusje

The described method for ventricular CSF collection has yielded relatively pure samples of embryonic CSF with stable protein composition and consistent activity in a number of cellular assays ⁹ . With a good collection technique and litter size of ten E14.5 mice, one can expect to collect 10-15 μl of CSF, and from a litter of E16 rats, one can expect to collect about 50-90 μl of CSF. This collection technique minimizes contamination from blood and tissue, by careful observation, centrifugation, and...

Materiały

Name	Company	Catalog Number	Comments
Wiretrop II capillary needles	Drummond Scientific	#5-000-2020
Sylgard	Ellsworth Adhesives	#184 SIL ELAST kit
Aspirator tube assembly	Sigma	#A5177-5EA
Disposable filter	Venturi or local pharmacy	not available	Standard cigarette filter
Roundstock opthalmic knife (15 degree stab knife)	World Precision Instruments, Inc.	#500250
35mm glass bottomed culture dish	MatTek Corp.	#P35G-1.5-14-C
Platinum-iridium wire	Tritech Research	#PT-9010-010-3FT
Nuclepore Track-Etch Membrane	Whatman	#09-300-57
Hanks Balanced Salt Solution	Fisher Scientific	#SH30031.FS
Iridectomy Scissors	Fine Science Tools	#15000-02