In vitro Methylation Assay to Study Protein Arginine Methylation

Podsumowanie

Protein arginine methylation, catalyzed by a class of enzymes viz., protein arginine methyl transferases (PRMTs), is the process of enzymatic addition of methyl group(s) to arginines within proteins. The in vitro methylation assay is the most dependable tool for assessing the methylation status of known or novel PRMT substrates.

Streszczenie

Protein arginine methylation is one of the most abundant post-translational modifications in the nucleus. Protein arginine methylation can be identified and/or determined via proteomic approaches, and/or immunoblotting with methyl-arginine specific antibodies. However, these techniques sometimes can be misleading and often provide false positive results. Most importantly, these techniques cannot provide direct evidence in support of the PRMT substrate specificity. In vitro methylation assays, on the other hand, are useful biochemical assays, which are sensitive, and consistently reveal if the identified proteins are indeed PRMT substrates. A typical in vitro methylation assay includes purified, active PRMTs, purified substrate and a radioisotope labeled methyl donor (S-adenosyl-L-[methyl-³H] methionine). Here we describe a step-by-step protocol to isolate catalytically active PRMT1, a ubiquitously expressed PRMT family member. The methyl transferase activities of the purified PRMT1 were later tested on Ras-GTPase activating protein binding protein 1 (G3BP1), a known PRMT substrate, in the presence of S-adenosyl-L-[methyl-³H] methionine as the methyl donor. This protocol can be employed not only for establishing the methylation status of novel physiological PRMT1 substrates, but also for understanding the basic mechanism of protein arginine methylation.

Wprowadzenie

Protein methylation was first described in 1968¹. It was not until the first cloning of PRMT1 in 1996, that researchers began to appreciate the importance of this post-translational modification². Interestingly, about 2% of arginine residues in the proteins of nuclear extracts are methylated³, indicating the abundance of this modification. Arginine is a positively charged amino acid with a basic side chain and the nitrogen/s within the side chains of arginine can be post-translationally modified via the addition of a methyl group, a process known as arginine methylation^4-6. Arginine methylation is catalyzed by a class of enzymes viz., protein arginine methyl transferases (PRMTs). Arginines can either be monomethylated or dimethylated and the latter can be either symmetric or asymmetric depending on the type of PRMTs catalyzing the process^4-6.

Proteins that display arginine-glycine rich motifs are potential targets for PRMT-mediated catalysis. PRMT-mediated methylation of substrates has been shown to modulate protein-protein interaction, protein-nucleic acid interaction, protein function, gene expression, and/or cellular signaling, all of which are critical for normal cellular homeostasis^7-9. In order to understand the biological role of protein arginine methylation, precise, efficient, and reproducible assays are required to establish the methylation status of the identified PRMT substrates.

In vitro methylation assay, which evaluates the abilities of purified PRMTs to catalyze methylation of their substrates, is a well-accepted assay for studying arginine methylation^10-12. The overall success of this assay largely depends upon the activity of the purified PRMTs. PRMTs can be expressed and purified from bacteria, or mammalian cells^10,11. This in vitro methylation assay, as detailed in the protocol section, is based upon a method originally described by Tini and colleagues¹⁰. In this protocol, we show in detail the steps involved in the expression and purification of PRMT1 in mammalian cells. The ability of the purified PRMT1 to catalyze methylation on Ras-GTPase activating protein binding protein 1 (G3BP1), a known PRMT substrate⁸, was later evaluated in the presence of S-adenosyl-L-[methyl-³H] methionine as the methyl donor. Using this assay, we can reliably define the abilities of the PRMTs to methylate novel or known substrates, which is a primary step in the study of protein arginine methylation.

Protokół

1. Preparation of Expression Constructs

1. Before starting the protocol, clone PRMTs into mammalian expression vectors with an N-terminal epitope tag (Myc or HA), and the substrate in-frame with glutathione-S-transferase (GST) for high-level protein expression and purification from bacterial cell lysates, using standard molecular biological techniques.

2. Purification of PRMTs

1. Use 100 mm culture dishes to maintain human bronchial epithelial cells (Beas2B). Passage the cells every 3 days and do not let them grow to confluence.
2. On the day before transfection, seed 7.5 x 10⁵ cells in 10 ml culture medium in a 100 mm culture dish. Swirl to evenly disperse the cells, and incubate at 37 °C in a 5% humidified CO₂ incubator.
3. The next day, aspirate the media and add 5 ml of culture media without serum and antibiotics. Swirl and aspirate the medium. Repeat this step one more time, and finally add 5 ml of serum/antibiotic free medium and proceed to transfection.
4. Dilute 6 μg of plasmid DNA into 750 μl of serum free medium in a sterile 1.5 ml plastic centrifuge tube.
5. In another 1.5 ml plastic centrifuge tube, dilute 30 μl of transfection reagent into 750 μl of serum free medium.
6. Transfer the diluted transfection reagent solution (step 2.5) to the tube containing diluted DNA (step 2.4). Mix gently by pipetting up and down several times.
7. Incubate the transfection mixture at room temperature for 15 min.
8. After 15 min, pipette the transfection mixture gently onto the cells, swirl to mix evenly, and incubate at 37 °C in a 5% humidified CO₂ incubator.
9. After 3 hr, aspirate the medium containing transfection mixtures from the cells. Add fresh cell culture medium supplemented with serum and antibiotics.
10. Incubate at 37 °C in a 5% humidified CO₂ incubator for 48 hr.
11. After 48 hr, lyse the cells in 1 ml of lysis buffer (1x phosphate buffered saline, 1% Nonidet P-40, 0.5% sodium deoxycholate, 0.1% sodium dodecyl sulfate, and 1 µg/ml phenlymethyl sulphonyl fluoride). Collect the lysates into a plastic centrifuge tube with a cell lifter and incubate the lysates on ice for 30 min.
12. Centrifuge the lysates at 15,000 x g for 10 min on a bench-top centrifuge to clear the lysates from cell debris. [* It is highly recommended to confirm the expression of HA-PRMT1 via immunoblotting of an aliquot of the lysates with anti-HA antibodies, before proceeding to purification of the enzymes for methylation assay.]
13. For purification of PRMTs, incubate 3 mg of cell lysates with 30 μl of 50:50 suspension of anti-HA affinity matrix in phosphate buffered saline (PBS), and rotate overnight at 4 °C in a tube rotator.
14. Next day, spin the tubes at 14,000 x g on a bench-top centrifuge for 2 min to collect the beads. Discard the supernatant and wash the beads 3x with 1 ml of RIPA buffer [20 mM Tris (pH 8.0), 150 mM NaCl, 5 mM EDTA and 1% Triton-X-100] in each wash followed by centrifugation at 14,000 x g for 2 min. After the third wash, wash the beads once with 100 μl of methylation buffer (50 mM Tris pH 8.5, 20 mM KCl, 10 mM MgCl₂, 1 mM β-mercaptoethanol, 100 mM sucrose). After the centrifugation, remove the supernatant. The beads containing the immobilized PRMTs are ready to be used in the methylation assay. [* It is highly recommended to use the immobilized PRMTs immediately in the methylation assay.]

3. Purification of Substrate

1. Inoculate a single colony of GST-G3BP1 transformed BL21 into 5 ml of Luria-Bertani (LB) medium containing 100 μg/ml ampicillin. Grow the cultures overnight at 37 °C with shaking at 250 rpm.
2. Next day, transfer the overnight culture to 50 ml of fresh LB medium and continue to grow to an OD₆₀₀ of 0.5-0.7 (It takes about 2 hr).
3. When the OD₆₀₀ reaches 0.5-0.7, add isopropyl-β-D-thiogalactoside (IPTG) to a final concentration of 1 mM and continue to culture for additional 4 hr at 37 °C with shaking at 250 rpm.
4. Harvest the cells by centrifugation at 1,500 x g for 10 min, and process the pellet for GST purification or store at -80 °C.
5. Re-suspend the bacterial pellet in 5 ml of lysis buffer (1x PBS with protease inhibitors, 100 μg/ml of lysozyme, and 0.1% Triton-X-100) and incubate the lysates at 37 °C for 30 min. At this time the lysates will appear turbid and viscous due to the release of bacterial genomic DNA.
6. Shear the genomic DNA by sonication (10 pulses of 1 sec each with an amplitude of 30%).
7. Clear the lysates by centrifugation at 15,000 x g for 10 min and transfer the clear supernatant to a 15 ml tube. If the supernatant is not clear repeat the centrifugation process one more time.
8. Meanwhile, wash the GST-sepharose beads twice with ice cold PBS and make a 50:50 suspension of GST-sepharose in PBS. Add 200 μl of the GST-sepharose suspension to the cleared bacterial cell lysate and rotate at 4 °C for 1 hr.
9. After 1 hr, centrifuge the tubes at 500 x g for 3 min to collect the beads. Wash the beads 3x with ice cold PBS.
10. After the final wash, resuspend the beads in 100 μl of elution buffer (50 mM Tris pH 8.0, 150 mM NaCl, 30 mM glutathione) and rotate at 4 °C for 10 min.
11. Centrifuge the tubes at 15,000 x g for 2 min and transfer the supernatant containing the purified protein into another plastic centrifuge tube. Carry out SDS polyacrylamide gel electrophoresis (SDS-PAGE) analysis on 5 μl of the purified protein along with known amounts of bovine serum albumin (BSA) to estimate the concentration of the purified protein.

4. Methylation Assay

NOTE: Perform following steps in a separate area designated for radioisotope work and in compliance with the institution’s protocols on performing experiments with radioactive isotopes.

1. Add 2 μg of purified GST-substrate and a master mix containing 1x methylation buffer (50 mM Tris pH 8.5, 20 mM KCl, 10 mM MgCl₂, 1 mM β-mercaptoethanol, 100 mM sucrose), 1 μCi of S-adenosyl-L-[methyl-³H] methionine, and water to a final volume of 10 μl to the immobilized PRMTs (step 2.13) and incubate the reaction at 30 °C for 1 hr.
2. After 1 hr, stop the reaction by adding 10 μl of 2x SDS sample buffer. After denaturation of the samples at 95 °C for 10 min, separate the samples on an SDS-PAGE gel.
3. Later, transfer the separated proteins from the SDS gel onto nitrocellulose membrane by using a semi-dry electrophoretic transfer.
4. After the transfer, cover the membrane with autofluor (an autoradiographic image intensifier), and gently rock for 2 hr at room temperature. After 2 hr, pour off the autofluor and retain for later use. [*Label the tube as radioactive material]
5. Quickly air dry the membrane on a filter paper, seal it in a plastic bag and expose the membrane to an X-ray film at -20 °C. Sufficient exposure time ranges between 5-30 days.

5. Confirmation of PRMT Expression and Equal Loading of Substrate

1. After achieving sufficient exposures, transfer the membrane to a plastic box containing blocking buffer [Tris-buffered saline with Tween-20 (TBST + 3% non-fat milk)] and gently rock for 1 hr.
2. Discard the blocking buffer as radioactive waste. Incubate the membrane with anti-HA antibody (1:1,000 dilution) in TBST overnight at 4 °C, with gentle rocking.
3. Wash the membrane with TBST 3x and incubate the membrane with HRP-labeled anti-mouse secondary antibody (1:5,000 dilution) in TBST at room temperature for 1 hr with gentle rocking.
4. After 1 hr, wash the membrane with TBST 3x, and perform chemiluminiscence detection of proteins with an HRP substrate.
5. After detection of the HA-tagged PRMTs, incubate the membrane with Ponseau-S staining solution for 5 min at room temperature. Quickly wash the membrane 3x with water to detect the GST-tagged substrates. Scan the image.

Wyniki

The abilities of HA-PRMT1 to methylate GST-G3BP1 were determined by an in vitro methylation assay. HA-tagged PRMT1 purified from Beas2B cell lysates was employed in a methylation reaction containing GST-G3BP1, and 1 μCi of S-adenosyl-L-[methyl-³H] methionine, as a methyl donor. PRMT1 could efficiently catalyze the methylation of GST-G3BP1 (Figure 1, upper panel). Methylation reactions using pull-downs performed on lysates of empty vector transfected Beas2B cells served as a negat...

Dyskusje

The protocol described herein is routinely used to establish the methylation status of the identified PRMT substrates. This robust, and consistent assay will also provide definitive evidence on the specificity of PRMTs for their substrates. The key components for the success of this assay are: 1. Expression of PRMTs in mammalian cells, 2. Activity of purified PRMTs, 3. Expression and purification of substrate, and 4. Complete western transfer of the proteins to the nitrocellulose membrane.

Rec...

Materiały

Name	Company	Catalog Number	Comments
S-adenosyl-L-[methyl-3H] methionine	Perkin Elmer
Ecoscint ultra	National Diagnostics	LS-270
Bottle top dispenser	National Diagnostics	LS-900
AutoFluor	National Diagnostics	LS-315
6 ml Scintillation Vials	National Diagnostics	SKU:SVC-06
GST-sepharose	GE Life Sciences
L-Glutathione Reduced	Sigma	G4251
Lipofectamine	Invitrogen		Transfection reagent
Beas2B	ATCC
Optimem	Invitrogen
NP-40	US-Biologicals
SDS	Sigma
Sodium deoxycholate	Sigma
PMSF	Sigma
anti-HA affinity matrix	Roche
Tris	Sigma
Nacl	Sigma
Bio-rad gel doc	Bio Rad
anti-HA antibody	roche
Ponseau S	Fisher Scientific