Isolation, Culture, and Differentiation of Bone Marrow Stromal Cells and Osteoclast Progenitors from Mice

Podsumowanie

In this article, we present methods to isolate and differentiate bone marrow stromal cells and hematopoietic stem cells from mouse long bones. Two different protocols are presented yielding different cell populations suitable for expansion and differentiation into osteoblasts, adipocytes, and osteoclasts.

Streszczenie

Bone marrow stromal cells (BMSCs) constitute a cell population routinely used as a representation of mesenchymal stem cells in vitro. They reside within the bone marrow cavity alongside hematopoietic stem cells (HSCs), which can give rise to red blood cells, immune progenitors, and osteoclasts. Thus, extractions of cell populations from the bone marrow results in a very heterogeneous mix of various cell populations, which can present challenges in experimental design and confound data interpretation. Several isolation and culture techniques have been developed in laboratories in order to obtain more or less homogeneous populations of BMSCs and HSCs invitro. Here, we present two methods for isolation of BMSCs and HSCs from mouse long bones: one method that yields a mixed population of BMSCs and HSCs and one method that attempts to separate the two cell populations based on adherence. Both methods provide cells suitable for osteogenic and adipogenic differentiation experiments as well as functional assays.

Wprowadzenie

Primary murine BMSCs are commonly used as an in vitro model of mesenchymal stem cells since their discovery in the early 1980s¹. Indeed, cultures of plastic-adherent cells flushed from the bone marrow cavity of long bones maintain the capacity to be differentiated into osteoblasts, osteoclasts, chondrocytes, or adipocytes in many studies^2,3,4,5. However, the bone marrow is a unique tissue composed of many different cell populations including, but not limited to, BMSCs, HSCs, endothelial, and immune cells. Thus, isolation and culture techniques can yield cell populations with different homogeneity. Using such techniques to test the differentiation potential from cells can be challenging. For example, when comparing cells from mice with different genotypes, starting with a mixed cell population limits the interpretation of the data. Conversely, obtaining homogenous populations of BMSCs and HSCs can be technically difficult and may not be as representative of an ex vivo model.

In our laboratory, we are primarily interested in the utilization of BMSCs due to their potential to be differentiated into osteoblasts, osteoclasts, and adipocytes. Here, we present techniques of BMSCs and HSCs isolation and culture used to assess osteoblastogenesis or adipogenesis in vitro, as well as cultures of HSCs to differentiate into osteoclasts. One method uses a mixed population of Bone Marrow Cells (BMCs) containing BMSCs and HSCs directly suitable for adipogenesis, osteoblastogenesis, and osteoclastogenesis (called Total BMCs). This method is a closer ex vivo representation of the heterogeneity found amongst the cells of the bone marrow microenvironment. Another method separates adherent from non-adherent cells in an attempt to culture "purer" populations of BMSCs and HSCs (called Adherent BMSCs). The later method allows the cell culture experiments to start with a more accurate number of BMSCs or HSCs and reduces the potential of complex indirect effects of other cell populations that remain in the culture. Both methods have been previously published and used to address different research questions^6,7,8,9.

Protokół

All experimental procedures were approved by the Institutional Animal Care and Use Committee at the Maine Medical Center Research Institute.

1. Collection Tubes Preparation

1. Make the BMSC culture media by supplementing Minimum Essential Medium α (MEM α) with 10% Fetal Bovine Serum and 1% of Penicillin/Streptomycin.
2. Place 100 µL of BMSC culture media in 1.5 mL microcentrifuge tubes. 3 bones will usually fit in one single tube so prepare accordingly.
3. Cut the ends of 200 µL pipette tips enough so that they fit in the centrifuge tubes. Insert the tips inside the tubes and ensure that the lids can close before placing the tubes on ice.
   NOTE: Alternatively, 0.75 mL microcentrifuge tubes with the ends cut can be inserted into the 1.5 mL microcentrifuge tube.

2. Harvest of Bones from Mice

1. Euthanize the animals using CO₂ followed by cervical dislocation and spray them with 70% ethanol.
   NOTE: Ensure that animals from the same sex and preferably the same age are used. We routinely use animals aged 7 to 8 weeks. We recommend pooling cells from at least 3 animals per experimental groups to yield a better representative and reproducible cell population.
2. Place the euthanized mouse on its back on a dissecting board. Use forceps to create a tent of skin on the abdomen. Make a small incision (around 1 cm) using sterile dissecting scissors. Peel back the skin towards the limbs and the feet from the cut in order to expose the lower abdomen and the legs.
   1. Cut below the ankle joint to remove the foot. Cut along the iliac crest at the hip to separate the femur head from the hipbone. While the mouse is still on its back, make an incision in the middle of the hipbone to separate the two iliac bones.
3. Using lint-free wipes, carefully remove the muscle from the femurs, tibias, and iliac bones.
   NOTE: Cutting as much of the tendons and muscle from the bone as possible makes the cleaning faster and easier with the lint-free wipes (e.g., kimwipes). Use care when manipulating the bones as they tend to break easily and their fragility may be increased with certain genotypes.
4. Once all the samples have been dissected, place them in PBS on ice and move to a sterile culture hood for the remaining steps of isolation.
   NOTE: Working aseptically as much as possible will reduce the potential for contamination in the cultures.
5. Make small cuts (approximately 1 to 2 mm) at both the proximal and distal ends of the bones before placing them in the sectioned tips within the centrifuge tubes.
   Note: Ensure to cut a sufficient amount so that marrow can be centrifuged out; however, care must be taken to avoid cutting too much as cell populations tend to vary based on proximity within the marrow space.
6. Centrifuge at 10,000 x g for 15 s at room temperature. Ensure that all the marrow is flushed and pelleted at the bottom of the 1.5 mL tube while the bones are inside the inserts (either 200 µL pipet tip or 0.75 mL microcentrifuge tube). Once all the marrow is collected, remove the inserts with the bones from the collection tubes.
   NOTE: If all the marrow is flushed, the bones will appear white. However, if marrow remains in certain bones, try cutting ends again and centrifuge.

3. Cell Suspension

1. Using a 25 G needle, pull the cell pellets up and down slowly to break up clumps and combine all the samples into a single 15 mL conical tube. Add 10 mL of BMSC Culture Media per 500 µL of samples.
2. Place a 70 µm filter on top of a 50 mL conical tube and pass the cell suspension through this filter in order to remove possible bone fragments.

4. Plating and Culture of Mixed Populations of Bone Marrow Cells (Total BMCs)

NOTE: Cells are cultured at 37 °C in an incubator with 5% CO₂.

1. Calculate the number of cells and plate them at 1.0 x 10⁶ cells/cm² in culture media.Allow 72 h of mixed culture for cells to attach.
   NOTE: We recommend diluting the cell suspension 20x in culture media and diluting again in trypan blue before counting the cells using a hemocytometer. For 7-week-old male C57Bl6/J mice, we routinely yield a cell number of around 50 x 10⁶ cells but age, sex, and strain can affect cell number greatly.
   NOTE: A mix population of cells should attach at the bottom of the culture well.
2. After 72 h, remove the media and replace it with fresh media. Continue changing the media every other day and check for confluency. When the cells reach 80-100% confluency, they are ready for differentiation.
   NOTE: Because this culture is mixed with both BMSCs and HSCs, it can be directly used for osteoblastogenesis, adipogenesis as well as osteoclastogenesis.

5. Plating and Culture of the Split Population of BMSCs (Adherent BMSCs)

NOTE: Cells are cultured at 37 °C in an incubator with 5% CO₂.

1. Plate all the cells collected from the femurs, tibias, and iliac bones of one mouse into a 10 cm culture dish (55 cm² of culture area).
   NOTE: When pooling 2-3 C57BL/6J mice, we typically plate this 'total' bone marrow population in a 150 cm² flask.
2. After 48 h of mixed culture, remove the culture media (containing the non-adherent HSCs). If osteoclastogenesis experiments are to be performed, set this population of non-adherent cells aside (see section 7), if not, aspirate and discard these cells.
3. Wash the plate/flask with PBS carefully as to not disturb the attached cells.
4. Remove PBS and lift the cells by adding 0.25% trypsin and incubating at 37 °C for 1-3 min. Quench the trypsin by adding cell media to the cell suspension. At this point, BMSCs, which are now lifted, can be counted (as previously done in step 4.1) and plated for future experiments.
5. Calculate the number of cells needed for plating. Centrifuge the required volume of cell suspension at 1,000 x g for 5 min at room temperature.
   Note: Cells are typically plated based on end-point experiments. For example, if protein/RNA is to be isolated we typically plate at a higher density (~1.0-2.0 x 10⁶ cells/well in 6-well plate).
6. Remove the media and resuspend the cell pellet in the volume of culture media needed for plating. Plate the cells in culture media according to the experiments and allow them to attach for a few days. When the BMSCs reach confluency, proceed to perform differentiation.

6. Differentiation of BMSCs

1. Osteoblasts
   1. Make osteoblast differentiation media by adding 800 µL of 1 M β-glycerol phosphate in PBS and 200 µL of 0.5 M ascorbic acid in PBS to 99 mL of BMSC culture media (see step 1.1 for the composition of the BMSC culture media).
      1. Once BMSCs cultures (either total BMCs from step 4.3 or adherent BMSCs from step 5.6) are confluent, differentiate them into osteoblasts by switching the culture media to osteoblast differentiation media.
   2. Replace the differentiation media every other day. Cells start producing white nodules of mineralization. Visualize them with the naked eye on the bottom of the well; this process can occur within a few days to 3 weeks.
      1. In order to assess osteoblastogenesis, perform alkaline phosphatase staining and/or Von Kossa staining on the wells as described in section 8.
         NOTE: Change the media carefully by tilting the plates at a slight angle in order to avoid disruption of the cell monolayer.
2. Adipocytes
   1. Make adipocyte base media by mixing together 90 mL of Dulbecco Modified Eagle Medium (DMEM) High Glucose, 10 mL of Fetal Bovine Serum, 1 mL of Penicillin/Streptomycin, 100 µL 20 mM Rosiglitazone and 100 µL of 2 mM Insulin. If needed, store this media at 4 °C for the week during the differentiation experiment.
   2. Make adipocyte induction media by adding 200 µL of 62.5 mM 3-isobutyl-1-methylxanthine (IBMX) and 25 µL of 1 mM Dexamethasone to 25 mL of Adipocyte Base Media.
   3. Once BMSCs cultures (either total BMCs from step 4.3 or adherent BMSCs from step 5.6) are confluent, change the media to adipocyte induction media. Consider this Day 0 of differentiation.
   4. After 48 h, remove the media and refresh the culture with adipocyte induction media.
   5. On Day 4, switch to adipocyte base media.
      NOTE: Lipid droplets can start appearing as early as Day 2 or Day 4.
   6. On Day 7, observe that cells have accumulated maximum lipid droplets and display a phenotype similar to a mature adipocyte. Do not culture past this point, as it may result cell death/detachment.

7. Differentiation of HSCs into Osteoclasts

1. Make Osteoclast Differentiation Media by adding 50 µL of 25 µg/mL of Receptor Activator of NFKB Ligand (RANKL) and 15 µL of 25 µg/mL of macrophage Colony Stimulating Factor (mCSF) to 25 mL of BMSC Culture Media.
2. Once the total BMCs (from step 4.3) or the non-adherent cells (from step 5.2) are attached to the well, culture media can be switched to Osteoclast Differentiation Media. Replenish differentiation media every other day.
3. Observe the osteoclast cultures every day under a microscope at 10X magnification. Observe that osteoclasts fuse and form multinucleated cells, typically around Day 5-7 of differentiation.

8. Staining

1. Osteoblasts
   NOTE: For the Alkaline Phosphatase (AP) staining, we often use an AP staining kit (see Table of Materials) according to the guidelines.
   1. Perform AP staining by following kit manufacturer's guidelines.
      1. Aspirate media and rinse cells with PBS. Fix the cells with 4% Paraformaldehyde (PFA) in PBS for 12 min at room temperature.
      2. In the meantime, make the AP solution using the reagents from the AP staining kit by adding 500 µL Sodium Nitrite to 500 µL FRV-Alkaline solution and mixing gently; let stand for 2 min. Add 22.5 mL dH₂O and 500 µL Naphthol AS-BI Alkaline. Mix gently.
         Caution: PFA is toxic and must be handled with care.
      3. Once the cells are fixed, rinse with PBS and add AP solution to each well (1 to 2 mL per well). Cover with aluminum foil and let stain for 30 min at room temperature protected from light. Aspirate the solution, wash with distilled water, and allow the plate to dry.
   2. Acquire images of stained colonies using a camera in order to observe alkaline phosphatase positive cells.
   3. Alternatively perform Von Kossa instead of alkaline phosphatase staining. For this, wash wells thoroughly with distilled water as any remaining PBS will precipitate with silver nitrate.
      1. Fix the cells with 4% PFA in PBS for 12 min at room temperature. Then, add enough 5% silver nitrate solution to cover the well and expose to strong light for 1 h at room temperature.
   4. Remove the silver nitrate solution and rinse each well with distilled water. Add 5% sodium thiosulfate solution to the cells and let stand for 3 min.
   5. Aspirate the sodium thiosulfate and wash with distilled water. Let the plate dry and observe the mineral deposit stained in dark brown/black with naked eye.
2. Adipocytes
   1. For Oil Red O (ORO) staining, fix the cells using 10% Neutral Buffered Formalin for 1 h at room temperature.
   2. In the meantime, make the ORO Stock Solution by dissolving 0.035 g in 10 mL of isopropanol. This is sufficient for a 6-well plate. Mix and pass the solution using one filter paper (pore size 11 µm).
   3. Make the ORO Working Solution by diluting 9 mL of ORO stock solution with 6 mL of distilled water. Leave the solution on a rocker until ready for use.
   4. Prepare 60% isopropanol in distilled water (make enough to cover each well).
   5. Once the cells are fixed, remove the fixative and wash once with distilled water. Replace the water with the 60% isopropanol solution for 1 min.
      NOTE: Add liquid slowly while tipping the plate; adipocytes dislodge very easily.
   6. Remove the isopropanol and add enough ORO Working Solution to cover all the cells. Incubate for 15 min on a low-speed rocker at room temperature. Remove ORO and wash twice with distilled water.
      NOTE: At this point, ORO-stained lipid droplets can be visualized under the microscope.
   7. To quantify ORO, destain the ORO by adding 1 mL of 100% isopropanol to each well and by rocking slowly for 10 min.
   8. In the meantime, prepare a dilution series to create a standard curve based on the following 8 standards using ORO Working Solution (2,100 µg/mL) and isopropanol as a diluent: 500, 350, 300, 250, 150, 100, 75, and 0 µg/mL.
   9. Load 200 µL of the standards and the destained samples in triplicates on a plate and read the absorbance at 490 nm.
      1. Determine concentration of ORO for each sample based on the standard curve.
         Note: We recommend normalizing the concentration ORO to cell number. Cell number can be quantified by crystal violet staining or DNA quantity.
3. Osteoclasts
   NOTE: When ready, we suggest staining osteoclasts for Tartrate-Resistant Acid Phosphatase (TRAP) using the TRAP staining kit (see Table of Materials).
   1. For TRAP staining, fix cells for 30 min at room temperature with 2.5% glutaraldehyde in PBS. In the meantime, make the TRAP solution by mixing together 50 µL of Fast Garnets Base Solution, 50 µL of Sodium Nitrite, 4.55 mL of distilled water, 50 µL of Napthol AS-Biphosphate, 200 µL of Acetate solution and 100 µL Tartrate solution.
   2. Aspirate off fixative, and rinse the cells with PBS twice before adding TRAP solution for 1 h at 37 °C.
   3. Wash with distilled water before counting osteoclasts under a microscope (magnification 10X). The TRAP⁺ cells appear purple with 3 or more nuclei.

Wyniki

Overview of the Cell Cultures
The two culture techniques allow the assessment of differentiation on a mixed population of BMCs comprised of BMSCs and HSCs (Total BMCs, Figure 1A) or a population of BMSCs split from HSCs (Adherent BMSCs, Figure 1B). 48 hr after the cells from the marrow are isolated and plated (Figure 1C), they rapidly attach to the bottom of the plastic culture...

Dyskusje

In this article, two methods of culture of BMSCs are presented with their advantages and limitations. Isolating cells coming from the bone marrow is a relatively effortless process. However, obtaining a cell population representative of the mesenchymal stem cells or osteoclastic progenitors can be challenging due to the diverse cellular environment of the marrow cavity.

Culturing the entirety of the bone marrow contents provides a close representation of the in vivo microenvironment. ...

Materiały

Name	Company	Catalog Number	Comments
200μL pipet tips	Rainin	17014401
1.5 mL centrifuge tubes	USA Scientific	1615-5500
15 mL conical tube	VWR	89039-668
50 mL conical tube	VWR	89039-660
Phosphate Buffered Saline (PBS)	Sigma-Aldrich	21-040-CM
Ethanol	Fisher Science	04-355-451
Dissection tools
70 μm filters	BD Falcon	352350
0.25% trypsin	Gibco	25200
Kimwipe	VWR	82003-820
Paraformaldehyde (PFA)	Electron Microscopy Science	15710
Alkaline Phosphatase kit	Sigma-Aldrich	86R
Silver Nitrate	Sigma-Aldrich	S6506
Sodium Thiosulfate	Sigma-Aldrich	S7026
Oil Red O	Sigma-Aldrich	O0625
Isopropanol	Sigma-Aldrich	190764
10% Neutral Buffered Formalin	Sigma-Aldrich	F5554-4L
Whatman filter Grade 1	Sigma-Aldrich	Z274852
Tartrate-Resistant Acid Phosphatase kit	Sigma-Aldrich	387A
Glutaraldehyde	Electron	16220
MEMα	Gibco	12571
Fetal Bovine Serum	VWR	97068-085
Penicillin/Streptomycin	Invitrogen	15140-122
β-glycerol phosphate	Sigma-Aldrich	G9891
Ascorbic acid	Sigma-Aldrich	A4544
DMEM High Glucose	Sigma-Aldrich	D5796
Rosiglitazone	Cayman Chemical	717410
Insulin	Sigma-Aldrich	I6634
IBMX	Sigma-Aldrich	I5879
Dexamethasone	Sigma-Aldrich	D4902
RANKL	Peprotech	310-01
mCSF	Peprotech	315-02
Axio Observer inverter microscope	Zeiss