Novel Method of Plasmid DNA Delivery to Mouse Bladder Urothelium by Electroporation

Podsumowanie

We describe a novel method for the delivery of DNA plasmid into the urothelial cells of mouse bladder in vivo through urethra catheterization and electroporation. It offers a fast and convenient way for generating autochthonous mouse models of bladder diseases.

Streszczenie

Genetically engineered mouse models (GEMMs) are extremely valuable in revealing novel biological insights into the initiation and progression mechanisms of human diseases such as cancer. Transgenic and conditional knockout mice have been frequently used for gene overexpression or ablation in specific tissues or cell types in vivo. However, generating germline mouse models can be time-consuming and costly. Recent advancements in gene editing technologies and the feasibility of delivering DNA plasmids by viral infection have enabled rapid generation of non-germline autochthonous mouse cancer models for several organs. The bladder is an organ that has been difficult for viral vectors to access, due to the presence of a glycosaminoglycan layer covering the urothelium. Here, we describe a novel method developed in lab for efficient delivery of DNA plasmids into the mouse bladder urothelium in vivo. Through intravesical instillation of pCAG-GFP DNA plasmid and electroporation of surgically exposed bladder, we show that the DNA plasmid can be delivered specifically into the bladder urothelial cells for transient expression. Our method provides a fast and convenient way for overexpression and knockdown of genes in the mouse bladder, and can be applied to building GEMMs of bladder cancer and other urological diseases.

Wprowadzenie

Genetically engineered mouse models (GEMMs) have been playing an essential role in expanding our knowledge about animal development, gene functions in vivo, and mechanisms of disease progression^1,2. Germline GEMMs are traditionally developed in two ways. The first is the creation of transgenic mice by pronuclear injection of DNA plasmid followed by the transplantation of zygotes into pseudopregnant females. The other is the generation of knock-out/knock-in mice by homologous recombination in embryonic stem cells and the development of chimeras. Conditional knockout of genes in specific tissue or cell type of interest involves the breeding of genetically engineered alleles with Cre and flox sites for multiple generations. The whole process can be expensive and time-consuming, especially if the goal is to target multiple genes tissue-specifically. Recently, gene-editing technologies such as clustered regularly interspaced short palindromic repeats (CRISPR) have been applied to several organs of the mice to induce tissue-specific genetic alterations for autochthonous cancer modeling^3,4,5,6,7 or correct disease mutations in situ^8,9. In these studies, the delivery of the gRNA vectors was usually achieved through adenoviral or lentiviral infection of the organ or hydrodynamic tail-vein injection. The relative ease of delivery of the CRISPR components to the lung and liver has greatly improved the convenience and efficiency of cancer modeling in these organs compared to the traditional Cre-Lox based mouse models.

The bladder urothelium is where most bladder tumors originate. The delivery of DNA vectors to the bladder urothelium for cancer modeling or gene therapy is hampered by a glycosaminoglycan layer on the apical urothelial surface, which acts as a barrier for adherence of infectious viruses^10,11. Several pretreatment agents such as Syn3 and dodecyl-β-d-maltoside have been used to disrupt this barrier and enhance adenovirus infection efficiency^12,13,14. Whether adeno-associated viruses (AAVs) can effectively infect the bladder has not been reported. Overall, a non-viral based delivery method would be desirable. Here, we describe a novel method developed in the lab for efficient DNA plasmid delivery to the mouse urothelium through urethra catheterization and electroporation. Because our approach does not involve chemical pretreatment of the glycosaminoglycan layer or virus production, it significantly simplifies the delivery of DNA plasmids into the mouse bladder urothelium, and should facilitate various in vivo studies of bladder diseases.

Protokół

All procedures described here were performed in accordance with the guidelines and regulations from the Institutional Animal Care and Use Committee (IACUC) of University of California Santa Cruz.

1. Plasmid and Tools Preparation

1. For each bladder to transfect, prepare at least 20 µL of DNA plasmid (1 µg/µL).
2. Add 1 µL of Trypan Blue to the 20 µL of plasmid solution in a 1.5 mL microcentrifuge tube. Pipette to mix well.
3. Autoclave all surgical instruments and sterilize the workspace with 70% ethanol. Spray surgical instruments and gloves with 70% ethanol frequently or use a glass bead sterilizer when performing the following steps to maintain sterile conditions.

2. Anaesthetizing Animal

1. Use a table top anesthesia system to anesthetize the animal with isoflurane. Turn on the O₂ tank and adjust the oxygen flowmeter to 1 L/min.
2. Place an adult female C57BL/6J mouse in the induction chamber. Turn on and adjust the isoflurane vaporizer to 3% for induction. The mouse should be in anesthesia within 2 min. Administer buprenorphine analgesic (0.1 mg/kg) subcutaneously upon removal of the mouse from the induction chamber for preemptive analgesia.
   NOTE: In this protocol, female mice are used, as they are easier to work with during urethra catheterization. The protocol also works for male mice, but extra caution is needed when performing step 3.
3. Apply ophthalmic ointment to the eyes of the animal to prevent dryness. Place the anaesthetized mouse facing up on a heating pad with its nose in the nose cone. Turn the air circuit switch to let isoflurane go through the nose cone.
4. Restrain the head and the nose cone with adhesive tape. Adjust the isoflurane vaporizer to 2% for maintenance.
5. Restrain the limbs with adhesive tape. Perform toe-pinch tests to make sure the animal is in deep anesthesia and then shave the abdominal area.

3. Urine Depletion and Bladder Rinsing

1. Apply lubricant to the catheter (24G, length of 2.11 cm, outer diameter of 0.045 cm) and ensure that its outer surface is fully covered.
2. Insert the catheter into the urethra opening and slowly push it until it reaches the bladder, at which time the urine should flow out through the catheter. Gently press the abdomen to help urine depletion.
   1. Check if the catheter is inserted correctly into the bladder by observing automatic urine out-flow. Avoid piercing the urethra and bladder wall, and apply lubricant multiple times if needed.
3. Discard the urine with a pipette into a waste beaker.
4. Pipette 80 µL of phosphate buffered saline (PBS) into the outer end of the catheter, with the other end still in the bladder. Carefully attach a 1 mL syringe to the catheter. Gently push the syringe to inject the PBS into the bladder. Leave some PBS in the catheter to avoid creating air bubbles in the bladder.
5. Remove the syringe. Wait for PBS to drain out of the bladder. Gently press the abdomen to evacuate PBS.
6. Discard the PBS in the catheter with a pipette into the waste beaker.
7. Repeat PBS washing (steps 3.4 - 3.6) for two more times.
   NOTE: It is essential to work gently during these washing steps. Blood in the catheter or failure of automatic out-flow of liquid usually indicates the urethra is pierced through. It is also important to avoid introducing air bubbles, as they will decrease the electroporation efficiency.

4. Plasmid Delivery

1. Apply 70% ethanol to the mouse abdomen and use a scalpel to make a vertical incision of 1 cm to open the abdominal skin above the bladder.
2. Pipette at least 20 µL of plasmid plus Trypan Blue solution into the outer end of the catheter, and attach the syringe.
3. Inject the plasmid solution into the bladder. If the bladder turns blue, the injection is successful. Leave some liquid in the catheter to avoid creating air bubbles in the bladder.
4. Grab the external urethral orifice using tweezers, and then remove the catheter and syringe. Use a string to tighten the external urethral orifice. Make two loops with the string and then tie with two knots.
   NOTE: Tightening of the urethral is important for preventing backflow of plasmid liquid.
5. Turn on the electroporation generator with the following parameters: 33V, 50 ms working time, and 950 ms interval time.
6. Hold the bladder with tweezers and pinch the bladder with two electrodes. Push the foot pedal to perform the electroporation.
   NOTE: The electric pulses are set to occur 5 times with short intervals after each pedal push. The mouse may twitch in this process. Pushing the foot pedal more than once can increase the delivery efficiency, but too many electric pulses can damage the tissue integrity of the urothelium.
   1. Avoid any contact between the tweezers and the electrodes, as this will generate a spark.

5. Recovery

1. Suture the abdominal and skin opening with sterile surgical suture and clips. Apply iodine onto the wound.
2. Remove the animal from the isoflurane system. Administer buprenorphine analgesic (0.1 mg/kg) subcutaneously to alleviate post-surgical pain.
3. Keep the animal on the heating pad and return it to the home cage after full recovery. Check the animal at least once daily for normal mobility, drinking and feeding behaviors and no signs of infection until the incision is healed and then remove the clips. Administer subsequent injections of buprenorphine analgesic if the animal displays pain symptom such as reduced grooming, increased aggressiveness, and vocalization.

Wyniki

To demonstrate the success of gene delivery into the bladder urothelium, we used the pCAG-GFP¹⁵ plasmid for electroporation. 20 µL of plasmid and Trypan Blue solution was injected through the urethra and 5 electric pulses were administered. After 48 h, we dissected the mouse bladder and observed patches of GFP fluorescence under a dissection fluorescence microscope, whereas a negative control bladder that did not undergo electroporation showed no GFP signal (<...

Dyskusje

Electroporation enhances the cell membrane permeability and is a powerful technology for gene electrotransfer¹⁶. Gene delivery into living rodents by electroporation has been frequently used in neurobiology fields^{17,18,19,20,21}. Its potential applications in many other organs have not been extensively explored. To our knowledge, our met...

Materiały

Name	Company	Catalog Number	Comments
BD 1mL TB Syringe	Fisher	148232E
Buprenorphine	Sigma	B9275-50MG
Dumont Tweezers	Roboz Surgical Instr	RS-5005	Treat with 70% ethanol before surgical use
ECM830 SQ Wave Electroporator	Harvard Apparatus	450052
Exel International Disposable Safelet I.V. Catheters	Fisher Scientific	14-841-21	24G, 2.11 cm length, 0.045 cm outer diameter
Extra Fine Micro Dissecting Scissors	Roboz Surgical Instr	RS-5135	Treat with 70% ethanol before surgical use
Isoflurane	Vet one	501017
K&H Heated Resting Mat for Small Animals, 9 By 12 Inches	Amazon	n/a	Cover the heat mat with paper towels
Ophthalmic ointment	Fisher	NC0849514
PBS, pH7.4	Life Technologies	10010049
Pipet tips 200 µL	USA Scientific	1111-0206
Pipet Tips, Universal Fit; 0.1 to 10 µL	Fisher	02707438(CS)
PIPETMAN NEO P2	Gilson	F144561
PIPETMAN NEO P200N	Gilson	F144565
plasmid CAG-GFP	Addgene	16664
Platinum tweezertrode 5 mm	Harvard Apparatus	450489	5 mm diameter
Scissors	Roboz Surgical Instr	RS-5880	Treat with 70% ethanol before surgical use
String cord	Amazon	n/a	Mandala Crafts 150D 210D 0.8mm 1mm leather sewing stitching flat waxed thread string cord
Tape, Scotch	Fisher	19047257
Therio-gel Veterinary Lubricant	PBS animal health	353-736
Trypan Blue Stain	Life Technologies	15250061
V-1 Table top system anesthesia	VetEquip	901806
Vicryl violet suture 18" FS-2 cutting 5-0	Fisher	NC0578475
Walgreens Povidone Iodine 10%	Walgreens	953982
Wound clip	Fisher	018045
Wound clip applier	Fisher	01804