A Rapid Screening Workflow to Identify Potential Combination Therapy for GBM using Patient-Derived Glioma Stem Cells

Podsumowanie

The glioma stem cells (GSCs) are a small fraction of cancer cells which play essential roles in tumor initiation, angiogenesis, and drug resistance in glioblastoma (GBM), the most prevalent and devastating primary brain tumor. The presence of GSCs makes the GBM very refractory to most of individual targeted agents, so high-throughput screening methods are required to identify potential effective combination therapeutics. The protocol describes a simple workflow to enable rapid screening for potential combination therapy with synergistic interaction. The general steps of this workflow consist of establishing luciferase-tagged GSCs, preparing matrigel coated plates, combination drug screening, analyzing, and validating the results.

Streszczenie

The glioma stem cells (GSCs) are a small fraction of cancer cells which play essential roles in tumor initiation, angiogenesis, and drug resistance in glioblastoma (GBM), the most prevalent and devastating primary brain tumor. The presence of GSCs makes the GBM very refractory to most of individual targeted agents, so high-throughput screening methods are required to identify potential effective combination therapeutics. The protocol describes a simple workflow to enable rapid screening for potential combination therapy with synergistic interaction. The general steps of this workflow consist of establishing luciferase-tagged GSCs, preparing matrigel coated plates, combination drug screening, analyzing, and validating the results.

Wprowadzenie

Glioblastoma (GBM) is the most common and aggressive type of primary brain tumor. Currently, the overall survival of GBM patients who received maximal treatment (a combination of surgery, chemotherapy, and radiotherapy) is still shorter than 15 months; so novel and effective therapies for GBM are urgently required.

The presence of glioma stem cells (GSCs) in GBM constitutes a considerable challenge for the conventional treatment as these stem-like cells play pivot roles in the maintenance of tumor microenvironment, drug resistance, and tumor recurrence¹. Therefore, targeting GSCs could be a promising strategy for GBM treatment². Nevertheless, a major drawback for the drug efficacy in GBM is its heterogenetic nature, including but not limited to the difference in genetic mutations, mixed subtypes, epigenetic regulation, and tumor microenvironment which makes them very refractory for treatment. After many failed clinical trials, scientists and clinical researchers realized that single-agent targeted therapy is probably incapable of fully controlling the progression of highly heterogeneous cancers such as GBM. Whereas, carefully selected drug combinations have been approved for their effectiveness by synergistically enhancing the effect of each other, thus providing a promising solution for GBM treatment.

Although there are many ways to evaluate the drug-drug interactions of a drug combination, such as the CI (Combination Index), HSA (Highest Single Agent), and Bliss values, etc.^3,4, these calculation methods are usually based on multiple concentration combinations. Indeed, these methods can provide affirmative assessment of drug-drug interaction but can be very laborious if they are applied in high-throughput screening. To simplify the process, a screening workflow for rapidly identifying the potential drug combinations that inhibit the growth of GSCs originated from surgical biopsies of patient GBM was developed. A sensitivity Index (SI) that reflects the difference of the expected combined effect and the observed combined effect was introduced into this method to quantify the synergizing effect of each drug, so the potential candidates can be easily identified by the SI ranking. Meanwhile, this protocol demonstrates an example screen to identify the potential candidate(s) that can synergize the anti-glioma effect with temozolomide, the first-line chemotherapy for GBM treatment, among 20 small molecular inhibitors.

Protokół

GBM specimen was acquired from a patient during a routine operation after obtaining fully informed consent by human research ethics committee of The First Affiliated Hospital of Nanjing Medical University.

1. Isolation and culture of patient-derived GSCs

1. Place fresh surgically resected glioblastoma tissue in a 15 mL centrifuge tube filled with sterile PBS and store the tissue on ice until further operation.
2. Mince the GBM tissue into approximately 0.5 to 1 mm diameter pieces using dissection scissors and wash the tissue specimens with neuronal basal medium to remove cellular debris in a biosafety cabinet.
3. Digest the tissue fragments with 1 mg/mL collagenase A at 37 °C for 30 min and centrifuge at 400 x g for 5 min at 4 °C.
4. Remove the supernatant and suspend the pellet with blank neuronal basal medium and dissociate the pellet mechanically by repetitive pipetting on ice.
5. Culture the mixture in ultra-low attachment 6-well culture plates filled with GSC culture medium (see Table 1 for the recipe) in a sterile cell incubator with 5% CO₂ and 90% humidity at 37 °C until neurosphere formation.
6. On sufficient neurosphere formation, collect them using a pipette in a 1.5 mL microtube and centrifuge at 800 x g for 5 min at room temperature.
7. Resuspend the pellet and split it into several flasks filled with the above culture medium for maintaining the primary GSCs.
   NOTE: Patient-derived GSCs used in the example were derived from surgical biopsies of a 34-year-old male patient with WHO grade IV recurrent GBM. The GSCs were named as XG387 for the future experiments. PCR-based mycoplasma tests were performed for the above GSCs to confirm no mycoplasma contamination is present. All the experiments involving GSCs used in this protocol were carried out <15 passages.

2. Preparing luciferase-tagged GSCs

1. Collect the GSCs from the medium culture and centrifuge them at 70 x g for 3 min at room temperature.
2. Remove the supernatant, digest the cells with accutase for 4 min at 37 °C. Use a 200 µL tip and pipette repeatedly to dissociate and resuspend the cell pellet.
3. Dilute the cells to 2 x 10⁵ cells per well in a 12-well culture plate and culture the cells overnight.
4. Add 30 µL luciferase-EGFP virus supernatant (titer >10⁸ TU /mL) into each well in the plate and then centrifuge the cells at 1,000 x g for 2 h at 25 °C. Culture the cells overnight.
5. Refresh the medium the next day and culture the cells for another 48 h.
6. Observe the cells under a florescent microscope to confirm the appearance of the GFP positive cells.
7. Use a flow cell sorter to sort and select the GSCs with high GFP fluorescence to culture the cells further.

3. Bio-luminescence based measurement of cell viability

1. Coating plates with the extracellular matrix (ECM) mixture (e.g., Matrigel): Add 40 µL of 0.15 mg/mL ECM mixture to each well and incubate the plate for 1 h at 37 °C. Remove the excess ECM mixture and gently rinse once with PBS.
2. Add 100 µL culture medium containing 15,000, 10,000, 8,000, 6,000, 4,000, 2,000, 1,000, and 500 XG387-Luc cells together with 100 µL blank medium as control into each well for 6 replicates in a 96-well optical bottom plate and culture the cells overnight at 37 °C.
3. Remove the supernatant, add 50 µL culture medium containing 150 ng/µL D-luciferin into each well and incubate the cells for 5 min at 37 °C.
4. Take images of the cellular bio-luminescence in the plate using the IVIS spectrum imaging system. Use the built-in software to create multiple circular areas of the region of interest (ROI) and quantify the cellular bio-luminescence.

4. Temozolomide treatment and combination screening

1. Precoat four 96-well plates as described above, prior to the treatment.
2. Seed XG387-Luc cells at a density of 1,000 cells in 100 µL culture medium into each well of a 96-well optical bottom plate and culture the cells overnight.
3. Prepare temozolomide and the targeted agents from the stock solution in advance. Prepare a concentration series composed of 800 µM, 600 µM, 400 µM, 300 µM, 200 µM, 100 µM, and 50 µM temozolomide in culture medium for the single-agent treatment. Dilute temozolomide and the targeted agents in stock solution in the culture medium, respectively, to obtain final concentrations of 200 µM and 2 µM for combination drug screening (Table 2).
4. Remove the culture medium when most of the GSCs adhere to the bottom of the plates; add the above-prepared medium containing temozolomide into each well for three technical replicates per treatment.
5. To treat Temozolomide and to screen the drug combinations remove the blank medium and add the above-prepared medium containing either 200 µM temozolomide, or 2 µM targeted agent, or a combination of both into each well for three technical replicates per treatment.
6. Incubate all plates at 37 °C, 5% CO2 for 3 days.
7. Remove the drug-containing medium, add 50 µL blank medium containing 150 ng/µL D-luciferin into each well and incubate the cells for 5 min at 37 °C.
8. Take images of the cellular bio-luminescence in the plate using the IVIS spectrum imaging system. Use the built-in software to create multiple circular ROIs and quantify the cellular bio-luminescence.

5. Combination treatment of temozolomide and UMI-77 in XG387-Luc and XG328-Luc cell lines

1. Precoat three 96-well plates as described above, prior to the treatment.
2. Seed XG387-Luc and XG328-Luc cells at a density of 1,000 cells respectively in 100 µL of culture medium into each well of a 96-well optical bottom plate and culture the cells overnight.
3. Prepare a concentration series composed of 600 µM, 400 µM, 300 µM, 200 µM, 100 µM, 50 µM, and 0 µM temozolomide and a concentration series composed of 6 µM, 4 µM, 3 µM, 2 µM, 1 µM, 0.5 µM, and 0 µM UMI-77 in the culture medium for six-by-six dose titration matrix treatments.
4. Remove the blank medium when most of the GSCs adhere to the bottom of the plate; add the above-prepared medium into each well for three technical replicates per treatment.
5. Incubate these plates for 3 days at 37 °C, 5% CO₂.
6. Remove the drug-containing medium; add 50 µL of blank medium containing 150 ng/µL D-luciferin into each well and incubate the cells for 5 min at 37 °C for bioluminescence measurement.

6. Data analysis

1. Calculate the sensitivity Index (SI) score of temozolomide and targeted agent according to the formula in Figure 2A.
   NOTE: The SI score is to quantify the influence of the addition of another drug. It ranged from -1 to +1, with positive values indicating temozolomide synergistic effects.
2. Calculate the combination index (CI) values between temozolomide and UMI-77 using CompuSyn software to analyze their combined interactions. CI value <1 indicates synergy; CI value >1 indicates antagonism.
3. Calculate the high single agent (HSA) values between temozolomide and UMI-77 using Combenefit software. HSA value indicates the combined inhibitory effect. HSA value >0 indicates synergy and the HSA value <0 indicates antagonism.

Wyniki

The XG387 cells formed neurospheres in the culture medium described in the Table 1 in an ultra-low attachment 6-well culture plate or a non-coated plate⁵ (Figure 1A). First, a test was performed to check whether the bio-luminescence intensity from XG387-Luc cells was proportional to the cell number. As shown in Figure 1B, the bio-luminescence intensity increased proportionally to the cell density and resulted in a linear ...

Dyskusje

In the present study, a protocol that can be applied to identify potential combination therapy for GBM using patient-derived GSCs was described. Unlike the standard synergy/additivity metric model such as Loewe, BLISS, or HSA methods, a simple and quick workflow was used that does not require a drug pair to be combined at multiple concentrations in a full factorial manner as the traditional methods. In this workflow, SI (sensitivity index) which is originated from a study to evaluate the sensitizing effect of siRNAs in c...

Materiały

Name	Company	Catalog Number	Comments
B-27	Gibco	17504-044	50X
EGF	Gibco	PHG0313	20 ng/ml
FGF	Gibco	PHG0263	20 ng/ml
Gluta Max	Gibco	35050061	100X
Neurobasal	Gibco	21103049	1X
Penicillin-Streptomycin	HyClone	SV30010	P: 10,000 units/ml     S:  10,000 ug/ml
Sodium Pyruvate	Gibco	2088876	100 mM
Table 1. The formulation of GSC complete culture medium.
ABT-737	MCE		Selective and BH3 mimetic Bcl-2, Bcl-xL and Bcl-w inhibitor
Adavosertib (MK-1775)	MCE		Wee1 inhibitor
Axitinib	MCE		Multi-targeted tyrosine kinase inhibitor
AZD5991	MCE		Mcl-1 inhibitor
A 83-01	MCE		Potent inhibitor of TGF-β type I receptor ALK5 kinase
CGP57380	Selleck		Potent MNK1 inhibitor
Dactolisib (BEZ235)	Selleck		Dual ATP-competitive PI3K and mTOR inhibitor
Dasatinib	MCE		Dual Bcr-Abl and Src family tyrosine kinase inhibitor
Erlotinib	MCE		EGFR tyrosine kinase inhibitor
Gefitinib	MCE		EGFR tyrosine kinase inhibitor
Linifanib	MCE		Multi-target inhibitor of VEGFR and PDGFR family
Masitinib	MCE		Inhibitor of c-Kit
ML141	Selleck		Non-competitive inhibitor of Cdc42 GTPase
OSI-930	MCE		Multi-target inhibitor of Kit, KDR and CSF-1R
Palbociclib	MCE		Selective CDK4 and CDK6 inhibitor
SB 202190	MCE		Selective p38 MAP kinase inhibitor
Sepantronium bromide (YM-155)	MCE		Survivin inhibitor
TCS 359	Selleck		Potent FLT3 inhibitor
UMI-77	MCE		Selective Mcl-1 inhibitor
4-Hydroxytamoxifen(Afimoxifene)	Selleck		Selective estrogen receptor (ER) modulator
Table 2. The information of 20 targeted agents used in the test screen. All of these are target selective small molecular inhibitors. The provider, name, and targets were given in the table.