Circulating Tumor Cell Lines: an Innovative Tool for Fundamental and Translational Research

Podsumowanie

Culturing CTCs allows a deeper functional characterization of cancer, through assaying specific marker expression, and assessing drug resistance and the ability to colonize the liver among other possibilities. Overall, CTC culture could be a promising clinical tool for personalized medicine to improve patient outcome.

Streszczenie

Metastasis is a leading cause of cancer death. Despite improvements in treatment strategies, metastatic cancer has a poor prognosis. We thus face an urgent need to understand the mechanisms behind metastasis development, and thus to propose efficient treatments for advanced cancer. Metastatic cancers are hard to treat, as biopsies are invasive and inaccessible. Recently, there has been considerable interest in liquid biopsies including both cell-free circulating deoxyribonucleic acid (DNA) and circulating tumor cells from peripheral blood and we have established several circulating tumor cell lines from metastatic colorectal cancer patients to participate in their characterization. Indeed, to functionally characterize these rare and poorly described cells, the crucial step is to expand them. Once established, circulating tumor cell (CTC) lines can then be cultured in suspension or adherent conditions. At the molecular level, CTC lines can be further used to assess the expression of specific markers of interest (such as differentiation, epithelial or cancer stem cells) by immunofluorescence or cytometry analysis. In addition, CTC lines can be used to assess drug sensitivity to gold-standard chemotherapies as well as to targeted therapies. The ability of CTC lines to initiate tumors can also be tested by subcutaneous injection of CTCs in immunodeficient mice.

Finally, it is possible to test the role of specific genes of interest that might be involved in cancer dissemination by editing CTC genes, by short hairpin ribonucleic acid (shRNA) or Crispr/Cas9. Modified CTCs can thus be injected into immunodeficient mouse spleens, to experimentally mimic part of the metastatic development process in vivo.

In conclusion, CTC lines are a precious tool for future research and for personalized medicine, where they will allow prediction of treatment efficiency using the very cells that are originally responsible for metastasis.

Wprowadzenie

Despite recent improvements in early cancer diagnosis and in therapeutic strategy, more than ninety percent of cancer morbidity is still due to metastasis¹. The metastatic process is a multi-step cascade that starts with the local detachment of cells from the primary tumor and their entrance into the bloodstream where they become circulating tumor cells (CTCs) to finally colonize distant sites such as liver and lungs, in the case of colorectal cancer (CRC)². Recently, there has been growing attention to liquid biopsies, which are a non-invasive tool to notably detect and enumerate CTCs from patient blood samples. Intratumor genetic heterogeneity is a major cause of drug resistance; thus, isolating representative cells from tumor material constitutes a promising tool for personalized medicine³.

Despite low frequency of CTCs in the blood (1 CTC per 10⁶ - 10⁷ leukocytes)⁴, several detection and isolation techniques were developed based on property differences between CTCs and other components of the blood⁵. The number of CTCs in patient blood samples, alone, can provide information about the stage of malignancy, treatment response and disease progression^6,7. Thus, CTC isolation is a crucial tool for translational studies to assess genetic heterogeneity or perform drug screening, as well as for fundamental studies to characterize these invasive cells, as they are the key actors of metastatic induction^8,9. Indeed, compared to commercially established cancer cell lines that have accumulated thousands of mutations over time, fresh CTCs share the main features of the original primary tumor including a potent capacity to metastasize, and they are a better reflection of the disease. These features make them a robust tool for fundamental studies, especially in knockout experiments of predicted key factors involved in metastasis. The outcome of these experiments can be validated in vivo, on mice, as described below.

Once CTCs are isolated, they can be expanded in non-adherent culture conditions and then, they can be manipulated just as any available cancer cell line, i.e. they can equally be cultured in adherent conditions or embedded in Matrigel, depending on the scientific question¹⁰. For example, to test the expression and localization of a protein of interest, CTC spheres can be grown in suspension condition and be embedded in Histogel to perform immunofluorescence on sphere sections. In addition, if the protein is membranous, its expression on living cells can be measured by cytometry.

For functional studies, to test the role of a protein of interest that may play a role in liver colonization, CTCs with genes edited, by shRNA or CRISPR/Cas9, can be injected into the spleen of immunodeficient mice. This latter experiment is a powerful model to mimic liver metastasis colonization¹¹.

The ability of CTCs to initiate tumors can be assessed by injecting a very small number of cells into immuno-deficient mice. As tumor initiation is a hallmark of cancer stem cells (CSCs) this assay will indicate the percentage of CSCs within CTC lines. This stem cell phenotype makes circulating tumor cell lines resistant to some gold-standard cancer therapies. Expanded CTCs can therefore be used to screen drugs and pinpoint the best potential efficient treatment for the patient; CTC response to treatment can be tested in vitro using a luminescence viability assay, for example.

In a long-term perspective, drug screening on freshly isolated and amplified CTCs could be used as a new tool for personalized medicine to aid in choosing the most efficient and adapted treatment for patients.

In the present paper, protocols to culture CTC lines, to stain specific proteins via immunostaining and cytometry, to perform cytotoxicity assays as well as in vivo xenograft experiments with CTC are detailed.

Protokół

All in vivo protocols were approved by the animal ethical agencies.

1. CTC Amplification in 3D Culture Conditions

1. To culture CTCs in suspension, first seed CTCs in wells of an Ultra-Low Attachment (ULA) 24-well plate at the maximal concentration of 5 cells/µL and into 1 mL of M12 medium (i.e., advanced DMEM-F12 supplemented with 2 mM l-glutamine, 100 Unit/mL penicillin and streptomycin, N2 supplement, 20 ng/mL epidermal growth factor and 10 ng/mL fibroblast growth factor¹⁰).
2. To allow sphere formation and cell expansion, incubate the cells in hypoxic conditions (2% O₂) between 6 to 10 days.
3. Once the spheres are large enough (100 µm), to prevent necrosis, dissociate them for amplification.
   1. Place the cell suspension in a 2 mL tube or a 15 mL tube and centrifuge at 300 x g for 5 minutes.
   2. Remove the supernatant and add 500 µL of gentle dissociation reagent (e.g., Accumax) to the pellet.
   3. Vortex gently and incubate the cell suspension with gentle dissociation reagent for 20 to 30 minutes at 37 °C.
      NOTE: Exceeding the incubation time in the gentle dissociation reagent (Accumax) may cause abnormal increased cell mortality.
   4. Add 1.5 mL of Phosphate Buffered Saline (PBS) and centrifuge the tube for 5 minutes at 300 x g.
   5. Pour off the supernatant and resuspend the pellet in fresh M12 medium to reach the density of 1-5 cells per µL.
   6. Seed the cell suspension in new wells of an Ultra-Low Attachment plate: 10 mL for T75 flasks, 2 mL for 6 well plates and 100 µL for 96 well plates

2. Immuno-Fluorescence (IF) Staining on CTC Sphere Sections

1. Centrifuge CTC spheres into a 15 mL tube at 300 x g for 5 min, aspirate the supernatant, and wash the pellet twice with PBS.
2. Resuspend the pellet with 500 µL of 4% paraformaldehyde (PFA) and incubate for 20 min on ice. Centrifuge the suspension at 300 x g and wash twice with 5 mL of PBS.
3. Resuspend the pellet with (i.e., 15 to 20 µL) hot and liquid Histogel. With a pipette, take all the suspension and make a droplet on a precooled surface at 4 °C and let it polymerize for 5 to 10 minutes.
   NOTE: Work fast to avoid the polymerization of the suspension into the tip.
4. Detach the solid droplet with the blade of a scalpel and insert it into a compartmented embedding cassette.
5. Perform the following steps: paraffin inclusion, paraffin sectioning, section rehydration, antigen retrieval and antibody incubation. These steps are the same as for any tumor or organ embedded in paraffin and processed for immunofluorescence staining¹².
   NOTE: The cassette can be stored in 70% ethanol at 4 °C until paraffin embedding.

3. Cytometry Analysis

1. Centrifuge CTC spheres into a 15 mL tube at 300 x g for 5 min and wash the pellet twice with PBS.
2. Aspirate the supernatant and add 500 µL of the gentle dissociation reagent to the pellet.
3. Vortex gently and incubate the cell suspension with the gentle dissociation reagent for 20 to 30 min at 37 °C.
   NOTE: Exceeding 40 min of incubation in the gentle dissociation reagent (Accumax) may result in an abnormal increased cell mortality.
4. Centrifuge the cell suspension for 5 min at 300 x g, eliminate the supernatant and resuspend the pellet in 5 mL of blocking buffer (i.e., PBS with 1% bovine serum albumin (BSA)).
5. Pass the cell suspension through a 40 µm cell strainer to eliminate the remaining spheres.
6. After counting, put 200,000 cells into three fluorescence-activated cell sorting (FACS) tubes, centrifuge at 300 x g for 5 min and remove the supernatant. Use one of the three FACS tube as a control that will not receive any staining reagents.
7. According to the datasheet, add the appropriate antibody into the two remaining FACS tubes (i.e., one conjugated antibody against the protein of interest, one conjugated isotype control).
8. After the recommended incubation time, add 300 µL of the blocking buffer to wash the cells, centrifuge the 3 tubes at 300 x g and aspirate the supernatant. Repeat this step twice. Then, resuspend the pellet with the blocking buffer with a cell viability staining reagent (except for the FACS tube control without any staining).
9. Keep the tubes on ice until FACS analysis. Use first the tube without staining to identify the gate for the cell viability and the antibody staining. Then analyze the FACS tube with the conjugated antibody against the protein of interest, to quantify the percentage of CTC expressing the protein of interest. The FACS tube with the conjugated isotype control should not indicate a shift. This confirms that the shift is specific to the targeted protein of interest.
   ​NOTE: If possible, use a cell line expressing a high level of protein of interest as a positive control and a cell line that does not express the protein as a negative control.

4. Luminescence Viability Assay (CellTiter-Glo)

1. Resuspend dissociated CTCs (as described in section 1.4.5) in M12 medium. Count the cells and adapt the cell concentration to 200,000 cells/mL.
2. In a ULA 96-well plate, seed 10,000 dissociated CTCs per well, in 50 µL, and incubate the plate in hypoxia (2% O₂) for 24 h.
3. The following day, add 50 µL of the tested drug to the CTCs. It is previously recommended to perform a titration of the drug concentration, to determine the half maximal inhibitory concentration (IC50). Treat some wells with vehicle only to determine basal cell viability.
   NOTE: The number of cells seeded may differ between CTC lines, depending on their doubling time. In addition, cells should be seeded in triplicates to minimize results variability.
4. Incubate plates in hypoxia for another 48 h.
5. At day 3, place the cultured plates and the luminescence cell viability buffer and substrate at room temperature and reconstitute the substrate with an appropriate volume of buffer, according to manufacturer protocol.
6. Add 70 µL of the luminescence viability mix into each cultured plate well. Put plates on an orbital shaker for 20 min to induce cell lysis and then transfer 100 µL of the mix into an opaque-walled multi-well plate, compatible with the luminometer.
7. Allow the plate to rest at room temperature, cover it with aluminum foil in order to stabilize the luminescent signal.
   ​NOTE: Luminescent signal is stable for up to 3 hours.
8. Record luminescence using a microplate reader (i.e., Tecan Infinite 200 Pro).
9. For data analysis, calculate the mean of the triplicate relative light unit RLU per condition. To assess the percentage of viability according to each drug concentration needed: (RLU of treated cells/RLU of untreated cells) x 100.

5. Subcutaneous Injections

1. In a microcentrifuge tube, resuspend cells in 100 µL of sterile PBS. If the number of injected cells is low, resuspend cells in 1:1 PBS/Matrigel, reduced in growth factors, to concentrate cells together and promote tumor initiation.
   NOTE: Cell density can be from 10 cells (to challenge the tumor initiation capacity) to 1 million of cells depending on the scientific question and the aim of the experiment.
2. Pull up the full volume in an insulin syringe.
3. On an immune-deficient mouse, pinch the skin of the flank between the index and the ring finger and gently insert the needle at the base of the skin.
   NOTE: This procedure is not painful and is done on conscious mice.
4. Slowly inject the volume in the same spot to prevent the spreading of the cells. This will create a small bleb beneath the skin.
5. Apply gentle pressure on the injection site to prevent the backflow of the volume.
6. Monitor the tumor growth, every other day, using a caliper.
7. Sacrifice the animal if the tumor exceeds 1500 mm³. Depending on the material availability, euthanize the mice by carbon dioxide or anaesthetic gases inhalation or by cervical dislocation.

6. Intrasplenic Injection

1. Before starting, autoclave the surgical instruments (scissors and forceps) at 124 °C for 15 min and clean out all surfaces of the working space with 70% ethanol.
2. In a microcentrifuge tube, resuspend cells in 50 µL of sterile PBS and store them on ice. Cell density can go from 0.5 to 1 million cells. A larger number of cells can cause a clots development into the blood circulation.
3. Prior to injecting the cells, inject 100 µL of 0.015 mg/mL buprenorphine subcutaneously, for pain relief.
4. Place the mouse in an induction chamber, where isoflurane is maintained at 3%, for 2-3 min. When the animal is no longer responsive to movement, put it on its right-hand side on a heating pad and maintain the anaesthesia using a breathing circuit face mask that delivers a gas mixture of O₂ and isoflurane.
5. Apply eye lubricant over each eye to avoid eye drying during the surgery. Disinfect the thoracic area with Povidone-iodine solution (i.e. Betadine).
6. On the dorsoventral side, make a small incision of 0.5 cm using scissors below the 10th false rib.
7. Gently lift the spleen out and lay it on sterile gauze. Using an insulin syringe, inject the 50 µL of CTCs in the tip of the spleen. Make sure to maintain the syringe upright and wait 3-5 min to avoid backflow, and then remove the needle.
8. Ligate the splenic vessels from the two sides (arteries and veins) and remove the spleen by cutting directly above the two ligatures. The spleen is removed to prevent unwanted tumor formation in this organ.
9. Stitch the abdominal peritoneum and then the skin using 5.0 degradable sterile sutures.
10. Keep the mouse warm until its full recovery from anesthesia.
11. Monitor the mouse 3 days per week for abnormal bodily function, abnormal movement and posture and for weight loss.
12. Sacrifice the animal when humane end points reach (approximately 6 weeks after the surgery) to analyze liver metastasis.

Wyniki

Both EpCAM and CD26 expressions observed by IF (Figure 1A right panel) and FACS (Figure 1B) respectively, indicate that the CTC line is epithelial and display one of the CSC hallmarks¹⁰. This epithelial trait can be further characterized by staining with antibodies directed against other epithelial and mesenchymal markers. Thereby, it could be possible to approximately know where the CTC line is along the epithelial-mesen...

Dyskusje

The protocol described above was used initially for colorectal CTC functional characterization, but it can be used for other types of cancer such as breast cancer and can be adapted for mouse models.

The real limiting factor is the number of CTCs present in the blood sample and the efficiency of the technique used to isolate and expand them. Several CTC isolation technics have been described based on specific CTC properties such as the Parsortix, a microfluidic device, that allows the isolatio...

Materiały

Name	Company	Catalog Number	Comments
Accumax solution	Sigma-Aldrich	A7089
Advanced DMEM/F-12	Gibco	12634028
CellTiter-Glo Luminescent Cell Viability Assay	Promega	G7570
Corning Matrigel Growth Factor Reduced (GFR) Basement Membrane Matrix	Corning	354230
Costar 24-well Clear Flat Bottom Ultra-Low Attachment Multiple Well Plates,	Corning	3473
Histiogel Specimen Medium	LabStorage	HG-4000
Human EGF, premium grade	Miltenyi Biotec	130-097-751
Human FGF-2, premium grade	Miltenyi Biotec	130-093-564
L-Glutamine (200 mM)	Gibco	25030081
N-2 Supplement	Gibco	17502048
Penicillin-Streptomycin (5,000 U/mL)	Gibco	15070063