Name: fish sperm assessment using software and cooling devices
Uploaded: 2018-07-28T12:30:00.000+00:00
Duration: 7 min 57 s
Description: Watch this Scientific Journal Video about Fish Sperm Assessment Using Software and Cooling Devices at JoVE.com

This project has received funding from the COST Association (Food and Agriculture COST Action FA1205: AQUAGAMETE, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie project IMPRESS (GA No 642893). We would like to thank the scientific team of PROiSER, specifically to the student Alberto Vendrell Bernab&#233;u, for his active participation in the video recording of this project.

Procedures involving animal subjects have been approved (2015/VSC/PEA/00064) by the General Direction of Agricultural Production and Livestock at the Universitat Polit&#232;cnica de Val&#232;ncia.
1. Collect Sperm from Mature European Eels in Captivity
NOTE: Use European eel males maintained in tanks with seawater and a recirculation system at constant temperature (20 &#176;C). Treat with hormones through weekly intraperitoneal injection (human chorionic gonadotropin (hCG); 1.5 IU per g of fish body weight). Acclimatize fish gradually starting with 3 days in freshwater followed by replacement with seawater (1/3 of the total water in the tank) every 2 days until reaching a salinity of 37.0 g/mL.
<ol>
	<li>Anesthetize the eel 24 h after hormone injection to obtain samples with better sperm quality.
	<ol>
		<li>Prepare the anaesthesia beforehand: add 300 mg of benzocaine to 100 mL of 70% ethanol. Mix well and store at 4 &#176;C.</li>
		<li>Dilute benzocaine in a flexible bucket with 5 L of system water to get a final concentration of 60 mg/L and mix properly.</li>
		<li>Transfer the fish to the bucket with system water and benzocaine. Wait a few minutes until the fish calm down.</li>
	</ol>
	</li>
	<li>Clear the genital area with water and dry with absorbent paper to avoid contamination of sperm samples by faeces, urine or seawater.</li>
	<li>Apply gentle pressure in the abdominal area and collect the sperm samples into 15 mL plastic tubes using the vacuum pump. Sperm volume up to 6-7 mL, depending on the male.</li>
	<li>Keep sperm samples at 4 &#176;C for at least 1 h until motility analysis is carried out.</li>
</ol>
2. Refrigerate and Dilute the Sperm Samples
<ol>
	<li>Prepare the diluter solution beforehand. 
	NOTE: The sperm samples should be diluted in the extender solution specific for each species.
	<ol>
		<li>Prepare the non-activator medium for eel sperm samples (P1 medium). Add 0.42 g of sodium bicarbonate, 1.828 g of sodium chloride, 0.127 g of magnesium chloride, 0.56 g of potassium chloride and 0.037 g of calcium chloride to 250 mL of distilled water. Mix well to dissolve. Store at 4 &#176;C.</li>
	</ol>
	</li>
	<li>Set the cooler block at 4 &#176;C to maintain samples at a constant temperature. Wait until the temperature stabilizes.</li>
	<li>Dilute the sperm samples using the diluter solution specific for each species. 
	NOTE: The dilution ratio is species specific and must be defined to standardize the protocol. First, estimate sperm concentration based on the concentration obtained in the pre-analysis of motility using software, as explained in steps 3 and 4. With this analysis, it is also possible to select the best sperm samples based on the percentage of motility. After this, the researcher can start to collect data for the experiment using the best samples with the correct concentration.
	<ol>
		<li>Dilute eel sperm samples in the P1 medium with a ratio of 1:50. To prepare 500 &#181;L of eel diluted sperm, add 50 &#181;L of the fresh sperm sample and 450 &#181;L of P1. Mix well.</li>
	</ol>
	</li>
</ol>
3. Evaluate the Sperm Motility Parameters
<ol>
	<li>Set-up the Motility Module of the Software
	<ol>
		<li>Set the cooler stage at 4 &#176;C and wait until it stabilizes.</li>
		<li>Open the software and select Motility Module. Create username and password if necessary.</li>
		<li>Select Properties and choose the desired parameters before starting the sperm analysis.
		<ol>
			<li>Click on Species | Fish.</li>
			<li>Select the Frames Per Second and Number of Images, depending on the best technical conditions for each species. Set both options at 120 images per second.</li>
			<li>Choose negative contrast. It is mandatory for accurate reconstruction of the spermatozoa trajectories16.</li>
			<li>Select the corresponding Counting Chamber and Scale of the video camera. Calibrate the video camera for the magnification lens used in the experiment. Set SpermTrack10 as counting chamber and 10X scale. 
			NOTE: In general, a depth of 10 &#181;m in the counting chamber and a magnification lens of 10X are the recommended conditions since they provide better focusing of all spermatozoa and capture the highest number of cells. However, it is recommended to make a previous study of the optimal conditions for motility analysis of each species.</li>
			<li>Adjust the Particle Area and Connectivity for each species. Set minimum particle area at 2 &#181;m2 and connectivity at 7 &#181;m. 
			NOTE: For fish, the minimum value of particles area ranges between 2-5 &#181;m, and connectivity depends on the spermatozoa velocity and the frame rate.</li>
			<li>Save the set-up.</li>
		</ol>
		</li>
		<li>Select Capture.</li>
	</ol>
	</li>
	<li>Analyze European Eel Sperm with Software
	<ol>
		<li>Prepare the activator solution (artificial seawater) by adding 0.946 g of commercial salt to 25 mL of distilled water with 2% BSA.</li>
		<li>Take 500 mL of activator solution (artificial seawater) and place in the cooler block. 
		NOTE: In general, fish sperm is activated by an osmotic shock event, although for some species the ion concentration could also be important. For freshwater species, the activator medium should have hypotonic osmolality, while for marine species the medium should be hypertonic.</li>
		<li>Put the counting chamber under the cooling stage and wait until the temperature stabilizes to 4 &#176;C.</li>
		<li>Mix the activator and diluted sperm to activate spermatozoa and start the motility video recording between 5-10 s after activation.
		<ol>
			<li>Take 4 &#181;L of activator solution and place in the counting chamber.</li>
			<li>Gently homogenize the diluted sperm by shaking the microcentrifuge 3 times to avoid damage in spermatozoa cells.</li>
			<li>Take 0.5 &#181;L of diluted sperm, mix with the activator, and put the cover in the counting chamber quickly. 
			NOTE: This step should not take more than 5 s to start the analysis as soon as possible.</li>
			<li>Focus on the spermatozoa cells and find the best visual area, which is defined by a low number of spermatozoa (150 to 200 cells) to avoid interception between cells (Supplemental Figure 1A). Select Capture Video to obtain the spermatozoa tracks, which are separated according to speed.</li>
			<li>Select Capture to obtain 3 to 7 fields, which are the optimal interval to obtain a lower variability in the results, and proceed as before. Record videos until 120 s post-activation in order to avoid condensation on the cover of the counting chamber.</li>
			<li>Select Exit to have a general view of all the fields.</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
4. Obtain Motility Data
<ol>
	<li>Select Fields | Partial | Save and choose a file name. Click Save. 
	NOTE: The spreadsheet provides mean values of partial data, charts and images of spermatozoa tracks.</li>
	<li>Select General Data | File Name | Save. 
	NOTE: The data provide kinetic values for individual spermatozoa of all fields.</li>
</ol>

The authors have nothing to disclose.

The sperm analysis software used in this protocol has been used by researchers worldwide for different species, including fish. However, fish have some specific features that can affect the sperm assessment. Fish spermatozoa showed high speed in the moment of activation which declines quickly and leads to a short time of motility after activation. Besides, the temperature of reproduction is species-dependent and, in some cases, could be around 4 &#176;C2,4,<...

The efficacy of reproduction depends on the quality of both gametes (eggs and sperm)1,2. This is the major factor that contributes to successful fertilization, allowing the development of viable offspring3,4. The convenient evaluation of gamete quality is the best tool for defining the fertility potential of a specimen. 
Mixing sperm from multiple males is a common practice in the production of many aquatic commercial species4. However, the sperm variability between males can lead to sperm competition and, consequently, not all the males are equally contributing to the gene pool5. In this sense, the correct evaluation of individual ejaculate/spermatozoa features, such as motility, is fundamental to obtain discriminatory information regarding individual male fertility potential. Direct observation of sperm motility can produce inaccurate and subjective data as it requires time and experience, which leads to a lack of consistency and incompatibility of results6,7. However, there are many innovative, rapid and quantitative techniques that can provide a reliable sperm quality analysis2,4. 
Computer-assisted sperm analysis was developed to offer accurate data about sperm quality8. This technology includes the development of software associated with a phase contrast microscope that allows the assessment of sperm motility. However, a limiting factor of motility parameter is the frame rate of the video camera. Individual spermatozoa trajectories are based on spermatozoa head centroid position in consecutive frames of video recordings, which is correlated with the flagellar movement patterns3,9,10,11. The main kinetic parameters measured are the straight-line velocity (VSL), curvilinear velocity (VCL) and average path velocity (VAP). VSL is the distance between the start and end-point taken by the spermatozoa divided by time. VCL is the real velocity along the precise trajectory taken by the spermatozoa. VAP is the velocity along a derived smoothed path of trajectory. These parameters allow additional kinetic information, including linearity (LIN), straightness (STR), wobble (WOB) and beating measurements like amplitude of lateral head movement (ALH) and beat-cross frequency (BCF)4,10.
The sperm analysis system was originally used for mammalian species, and one of the requirements for the system is to operate at the body temperature of the donor (about 37 &#176;C). This software could also be used for fish species; although, it is necessary to make some adaptations to reduce the error of sperm analysis results. In some fish species, such as salmonids and eel8,12, fertilization occurs at low temperature (around 4 &#176;C)2,4. Thus, cooling devices should be developed to avoid uncomfortable working conditions. In addition, fish spermatozoa are immotile in seminal fluid and require an osmotic shock to activate motility. For freshwater species, the activator medium should have hypotonic osmolality, while for marine species the medium should be hypertonic. However, for some species, as salmonids, the ion concentration could also be important3,4,9. After activation, fish sperm is characterized by a rapid decrease of motility (less than 2 min)13,14 and high velocity, being vital to determine the optimal frame rate to obtain reliable data15.
The objectives of this study are to design and apply refrigeration systems for fish sperm samples. In addition, this protocol defines how to determine the optimal frame rates for the establishment of standard protocols depending on the species. The use of this protocol opens new doors in the context of fish seminal evaluation, using the European eel as a model.

<table><tbody><tr><td>Human Chorionic Gonadotropin</td><td>Argent Chemical Laboratories</td><td>hCG</td><td>Hormone</td></tr><tr><td>Benzocaine</td><td>Merck</td><td>E1501 Sigma</td><td>Anesthesia</td></tr><tr><td>sodium bicarbonate</td><td>Merck</td><td>S5761 Sigma&amp;nbsp;</td><td>P1 medium</td></tr><tr><td>sodium chloride</td><td>Merck</td><td>1.06406 EMD Millipore</td><td>P1 medium</td></tr><tr><td>magnesium chloride</td><td>Merck</td><td>1374248 USP</td><td>P1 medium</td></tr><tr><td>potassium chloride</td><td>Merck</td><td>P3911-500G</td><td>P1 medium</td></tr><tr><td>calcium chloride</td><td>Merck</td><td>C7902-500G</td><td>P1 medium</td></tr><tr><td>commercial salt</td><td>Aqua Medic&amp;nbsp;</td><td>Meersalz</td><td>Activator solution&amp;nbsp;</td></tr><tr><td>BSA</td><td>Merck</td><td>05470 Sigma</td><td>Activator solution&amp;nbsp;</td></tr><tr><td>Falcon tubes 15 ml</td><td>Merck</td><td>T1943-1000EA</td><td></td></tr><tr><td>Falcon tubes support</td><td>Merck</td><td>R5651-5EA</td><td></td></tr><tr><td>Eppendorfs</td><td>Merck</td><td>T9661-1000EA</td><td></td></tr><tr><td>Micropipet 20 &amp;micro;l</td><td>Gilson</td><td>PIPETMAN&amp;reg; Classic</td><td></td></tr><tr><td>Micropipet 10 &amp;micro;l</td><td>Merck</td><td>Z683787-1EA</td><td></td></tr><tr><td>Tips for micropipets 20 &amp;micro;l</td><td>Merck</td><td>Z740030-1000EA</td><td></td></tr><tr><td>Tips for micropipets 10 &amp;micro;l</td><td>Merck</td><td>Z740028-2000EA</td><td></td></tr><tr><td>Spermtrack</td><td>PROiSER</td><td>Counting chamber</td><td></td></tr><tr><td>TruMorph</td><td>PROiSER</td><td>TruMorph</td><td></td></tr><tr><td>Microscope UB 200i Serie</td><td>PROiSER</td><td>Microscope</td><td></td></tr><tr><td>Cooler plate</td><td>PROiSER</td><td></td><td>Prototype</td></tr><tr><td>Cooler block</td><td>PROiSER</td><td></td><td>Prototype</td></tr><tr><td>ISAS v1</td><td>PROiSER</td><td>ISAS</td><td>Software</td></tr></tbody></table>

fish sperm assessment using software and cooling devices

For gamete quality evaluation, there are innovative, rapid, and quantitative techniques that can provide useful data for aquaculture. Computerized systems for sperm analysis were developed to measure several parameters and one of the most commonly measured is the sperm motility.
Initially, this computer technology was designed for mammalian species, although it can also be used for fish sperm analysis. Fish have specific features that can affect sperm assessment such as a short motility time after activation and, in some cases, adaptation to lower temperatures. Thus, it is necessary to modify both software and hardware components to make motility analysis more efficient for fish sperm analysis. For mammalian sperm, the heating plate is used to maintain optimal temperatures of spermatozoa. However, for some fish species, it is advantageous to use a lower temperature to prolong the duration of motility, since the sperm remain active for less than 2 min. Therefore, cooling devices are necessary to refrigerate samples at constant temperature over the time of analysis, including on the optical microscope. This protocol describes the analysis of fish sperm motility using software for sperm analysis and new cooling devices to optimize the results.

Analysis of the time effect on sperm motility
In the case of the European eel, the percentage of static spermatozoa increased from 15 s to 120 s after activation (from 24.4% to 40.7%), and the percentage of mobile progressive spermatozoa decreased (from 36.9% to 20.9%) (Figure&#160;1A and 1B). Based on speed, spermatozoa cells showed a decrease in velocity over time...

Watch this Scientific Journal Video about Fish Sperm Assessment Using Software and Cooling Devices at JoVE.com

Fish Sperm Assessment Using Software and Cooling Devices

The present protocol describes a procedure of fish sperm assessment using computer-assisted sperm analysis and cooling devices. The software gives a rapid, accurate and quantitative analysis of fish sperm quality based on spermatozoa motility, which can be a useful tool in aquaculture to improve reproduction success.

For gamete quality evaluation, there are innovative, rapid, and quantitative techniques that can provide useful data for aquaculture. Computerized systems ...

fish-sperm-assessment-using-software-and-cooling-devices

Research

JoVE Journal

Biology

8.7K Views.  PROiSER R+D S.L.. The present protocol describes a procedure of fish sperm assessment using computer-assisted sperm analysis and cooling devices. The software gives a rapid, accurate and quantitative analysis of fish sperm quality based on spermatozoa motility, which can be a useful tool in aquaculture to improve reproduction success.

Video: Fish Sperm Assessment Using Software and Cooling Devices

Handling and Treatment of Male European Eels (Anguilla anguilla) for Hormonal Maturation and Sperm Cryopreservation

During the last years, several research groups have been working on the development and improvement of new protocols for the European eel handling and maturation. As of yet, weekly injections of human chorionic gonadotropin (hCG) have proved to maturate males after just 5-6 weeks of treatment, producing high volumes of high-quality sperm during several weeks. In addition, sperm cryopreservation protocols using different extenders, cryoprotectants and cooling and thawing times have been previously described for European eel. Here, we show that Tanaka&#180;s extender solution can be directly used for fertilization or for cryopreservation, making unnecessary the usage of different types of solutions and dilutions. Furthermore, the use of methanol as a cryoprotectant makes this protocol easy to use as methanol has low toxicity and does not activate the sperm. The sperm does not need to be cryopreserved immediately after the addition of the cryoprotectant, and it can be used long after being thawed. Moreover, sperm motility is still high after thawing although it is lower than that of fresh sperm. The aim of this work is to show the best available protocol for European eel handling, maturation, and sperm cryopreservation.

Handling and Treatment of Male European Eels Anguilla anguilla for Hormonal Maturation and Sperm Cryopreservation

Protocols for European eel maturation and sperm cryopreservation have been improved over the last years. This article describes the best protocol available using human chorionic gonadotropin (hCG) for inducing maturation and methanol as cryoprotectant.

During the last years, several research groups have been working on the development and improvement of new protocols for the European eel handling and ...

Developmental Biology

A High-Throughput Method For Zebrafish Sperm Cryopreservation and In Vitro Fertilization

This is a method for zebrafish sperm cryopreservation that is an adaptation of the Harvey method (Harvey et al., 1982).  We have introduced two changes to the original protocol that both streamline the procedure and increase sample uniformity.  First, we normalize all sperm volumes using freezing media that does not contain the cryoprotectant. Second, cryopreserved sperm are stored in cryovials instead of capillary tubes.  The rates of sperm freezing and thawing (&delta;&deg;C/time) are probably the two most critical variables to control in this procedure.  For this reason, do not substitute different tubes for those specified.  Working in teams of 2 it is possible to freeze the sperm of 100 males per team in ~2 hrs.  Sperm cryopreserved using this protocol has an average of 25% fertility (measured as the number of viable embryos generated in an in vitro fertilization divided by the total number of eggs fertilized) and this percent fertility is stable over many years.

A High-Throughput Method For Zebrafish Sperm Cryopreservation and In Vitro Fertilization

This is a high-throughput sperm cryopreservation protocol for zebrafish. Sperm cryopreserved using this protocol has an average of 25% fertility in subsequent vitro fertilization and is stable over many years.

This is a method for zebrafish sperm cryopreservation that is an adaptation of the Harvey method (Harvey et al., 1982).  We have introduced two changes to ...

Fluorescence in situ hybridization (FISH) Protocol in Human Sperm

Aneuploidies are the most frequent chromosomal abnormalities in humans. Most of these abnormalities result from meiotic errors during the gametogenic process in the parents. In human males, these errors can lead to the production of spermatozoa with numerical chromosome abnormalities which represent an increased risk of transmitting these anomalies to the offspring.
For this reason, the technique of fluorescence in situ hybridization (FISH) on sperm nuclei has become a protocol widely incorporated in the context of clinical diagnosis. This practice provides an estimate of the frequencies of numerical chromosome abnormalities in the gametes of the patients that seek for genetic reproductive advice.
To date, the chromosomes most frequently included in sperm FISH analysis are chromosomes X, Y, 13, 18 and 21.
This video-article describes, step by step, how to process and fix a human semen sample, how to decondense and denature the sperm chromatin, how to proceed to obtain sperm FISH preparations, and how to visualize the results at the microscope. Special remarks of the most relevant steps are given to achieve the best results.

Fluorescence in situ hybridization FISH Protocol in Human Sperm

This video-article describes, step by step, how to process a semen sample to achieve good-quality fluorescence in situ hybridization on human spermatozoa. Preparations obtained can be used for aneuploidy screening in the context of clinical diagnosis.

Aneuploidies are the most frequent chromosomal abnormalities in humans. Most of these abnormalities result from meiotic errors during the gametogenic ...

Fluorimetric Techniques for the Assessment of Sperm Membranes

Standard spermiograms describing sperm quality are mostly based on the physiological and visual parameters, such as ejaculate volume and concentration, motility and progressive motility, and sperm morphology and viability. However, none of these assessments is good enough to predict the semen quality. Given that maintenance of sperm viability and fertilization potential depends on membrane integrity and intracellular functionality, evaluation of these parameters might enable a better prediction of sperm fertilization competence. Here, we describe three feasible methods to evaluate sperm quality using specific fluorescent probes combined with fluorescence microscopy or flow cytometry analyses. Analyses assessed plasma membrane integrity using 4&#39;,6-diamidino-2-phenylindole (DAPI) and propidium iodide (PI), acrosomal membrane integrity using fluorescein isothiocyanate-conjugated Pisum sativum agglutinin (FITC-PSA) and mitochondrial membrane integrity using 5,5&#39;,6,6&#39;-tetra-chloro-1,1&#39;,3,3&#39;-tetraethylbenzimidazolyl carbocyanine iodide (JC-1). Combinations of these methods are also presented. For instance, use of annexin V combined with PI fluorochromes enables assessing apoptosis and calculating the proportion of apoptotic sperm (apoptotic index). We believe that these methodologies, which are based on examining spermatozoon membranes, are very useful for the evaluation of sperm quality.

Here, we present methodologies to evaluate spermatozoan membrane integrity, a cellular feature associated with sperm fertilization competence. We describe three techniques for the fluorimetric assessment of sperm membranes: simultaneous staining with specific fluorescent probes, fluorescence microscopy, and advanced sperm-dedicated flow cytometry. Examples of combining the methodologies are also presented.

Standard spermiograms describing sperm quality are mostly based on the physiological and visual parameters, such as ejaculate volume and concentration, ...

Two Types of Assays for Detecting Frog Sperm Chemoattraction

Sperm chemoattraction in invertebrates can be sufficiently robust that one can place a pipette containing the attractive peptide into a sperm suspension and microscopically visualize sperm accumulation around the pipette1. Sperm chemoattraction in vertebrates such as frogs, rodents and humans is more difficult to detect and requires quantitative assays. Such assays are of two major types - assays that quantitate sperm movement to a source of chemoattractant, so-called sperm accumulation assays, and assays that actually track the swimming trajectories of individual sperm.
Sperm accumulation assays are relatively rapid allowing tens or hundreds of assays to be done in a single day, thereby allowing dose response curves and time courses to be carried out relatively rapidly. These types of assays have been used extensively to characterize many well established chemoattraction systems - for example, neutrophil chemotaxis to bacterial peptides and sperm chemotaxis to follicular fluid. Sperm tracking assays can be more labor intensive but offer additional data on how chemoattractancts actually alter the swimming paths that sperm take. This type of assay is needed to demonstrate the orientation of sperm movement relative to the chemoattrractant gradient axis and to visualize characteristic turns or changes in orientation that bring the sperm closer to the egg.
Here we describe methods used for each of these two types of assays. The sperm accumulation assay utilized is called a "two-chamber" assay. Amphibian sperm are placed in a tissue culture plate insert with a polycarbonate filter floor having 12 &mu;m diameter pores. Inserts with sperm are placed into tissue culture plate wells containing buffer and a chemoatttractant carefully pipetted into the bottom well where the floor meets the wall (see Fig. 1). After incubation, the top insert containing the sperm reservoir is carefully removed, and sperm in the bottom chamber that have passed through the membrane are removed, pelleted and then counted by hemocytometer or flow cytometer.
The sperm tracking assay utilizes a Zigmond chamber originally developed for observing neutrophil chemotaxis and modified for observation of sperm by Giojalas and coworkers2,3. The chamber consists of a thick glass slide into which two vertical troughs have been machined. These are separated by a 1 mm wide observation platform. After application of a cover glass, sperm are loaded into one trough, the chemoattractant agent into the other and movement of individual sperm visualized by video microscopy. Video footage is then analyzed using software to identify two-dimensional cell movements in the x-y plane as a function of time (xyt data sets) that form the trajectory of each sperm.

Eggs and the extracellular coatings around eggs frequently release peptides, proteins and small molecules that communicate with sperm to guide them to the egg thereby promoting fertilization. Using frog sperm we describe and compare two classes of assays used to detect sperm chemoattraction &#x2013; sperm accumulation assays and sperm tracking assays.

Sperm chemoattraction in invertebrates can be sufficiently robust that one can place a pipette containing the attractive peptide into a sperm suspension ...

Cryopreservation of Zebrafish Spermatogonia by Whole Testes Needle Immersed Ultra-Rapid Cooling

Current trends in science and biotechnology lead to creation of thousands of new lines in model organisms thereby leading to the necessity for new methods for safe storage of genetic resources beyond the common practices of keeping breeding colonies. The main purpose of this study was to adapt the needle immersed vitrification (NIV) procedure to cryopreserve whole zebrafish testes. Cryopreservation of early-stage germ cells by whole testes NIV offers possibilities for the storage of zebrafish genetic resources, especially since after transplantation they can mature into both male and female gametes. Testes were excised, pinned on an acupuncture needle, equilibrated in two cryoprotective media (equilibration solution containing 1.5 M methanol and 1.5 M propylene glycol; and vitrification solution containing 3 M dimethyl sulfoxide and 3 M propylene glycol) and plunged into liquid nitrogen. Samples were warmed in a series of three consequent warming solutions. The main advantages of this technique are (1) the lack of spermatozoa after digestion of warmed testes thus facilitating downstream manipulations; (2) ultra-rapid cooling enabling the optimal exposure of tissues to liquid nitrogen therefore maximizing the cooling and reducing the required concentration of cryoprotectants, thereby reducing their toxicity; (3) synchronous exposure of several testes to cryoprotectants and liquid nitrogen; and (4) repeatability demonstrated by obtaining viability of above 50% in five different zebrafish strains.

The main purpose of this study was to adapt the needle immersed vitrification (NIV) procedure to cryopreserve whole zebrafish testes. Additionally, the repeatability of the method in five different zebrafish strains was tested.

Current trends in science and biotechnology lead to creation of thousands of new lines in model organisms thereby leading to the necessity for new methods ...

Sperm Collection of Differential Quality Using Density Gradient Centrifugation

In sexual reproduction, a male gamete or sperm cell fuses with a female gamete to bring about fertilization. However, a large number of sperm cells with fertilizing ability are required to interact with a female gamete to ensure fertilization. As such, the fertilizing ability of individual sperm cells is critical for successful reproduction. Density gradient centrifugation has been utilized for several decades as a reproducible, fast, efficient, effective and extremely adaptable method to collect only high-quality sperm to be used in assisted reproductive technology. The protocols we described herein focus on the utilization of the discontinuous Percoll density gradient centrifugation (PDGC) technique to isolate three distinct populations of rooster sperm by their quality. We were able to collect low-, medium- and high-quality sperm. We also describe reproducible protocols that entail determining fertility potential of sperm by assessing their viability, mobility and penetrability. Collection of sperm by their quality using PDGC technique would be useful to accurately and thoroughly characterize sperm with differential fertility potential.

In this paper, we aim to describe the performance of the density gradient centrifugation technique and its application in sperm physiology research.

In sexual reproduction, a male gamete or sperm cell fuses with a female gamete to bring about fertilization. However, a large number of sperm cells with ...

Functional Assessment of Kinesin-7 CENP-E in Spermatocytes Using In Vivo Inhibition, Immunofluorescence and Flow Cytometry

In eukaryotes, meiosis is essential for genome stability and genetic diversity in sexual reproduction. Experimental analyses of spermatocytes in testes are critical for the investigations of spindle assembly and chromosome segregation in male meiotic division. The mouse spermatocyte is an ideal model for mechanistic studies of meiosis, however, the effective methods for the analyses of spermatocytes are lacking. In this article, a practical and efficient method for the in vivo inhibition of kinesin-7 CENP-E in mouse spermatocytes is reported. A detailed procedure for testicular injection of a specific inhibitor GSK923295 through abdominal surgery in 3-week-old mice is presented. Furthermore, described here is a series of protocols for tissue collection and fixation, hematoxylin-eosin staining, immunofluorescence, flow cytometry and transmission electron microscopy. Here we present an in vivo inhibition model via abdominal surgery and testicular injection, that could be a powerful technique to study male meiosis. We also demonstrate that CENP-E inhibition results in chromosome misalignment and metaphase arrest in primary spermatocytes during meiosis I. Our in vivo inhibition method will facilitate mechanistic studies of meiosis, serve as a useful method for genetic modifications of male germ lines, and shed a light on future clinical applications.

Functional Assessment of Kinesin-7 CENP-E in Spermatocytes Using In Vivo Inhibition, Immunofluorescence and Flow Cytometry

This article reports an in vivo inhibition of CENP-E through abdominal surgery and testicular injection of GSK923295, a valuable model for male meiotic division. Using the immunofluorescence, flow cytometry and transmission electron microscopy assays, we show that CENP-E inhibition results in chromosome misalignment and genome instability in mouse spermatocytes.

In eukaryotes, meiosis is essential for genome stability and genetic diversity in sexual reproduction. Experimental analyses of spermatocytes in testes ...

Sperm Collection and Computer-Assisted Sperm Analysis in the Teleost Model Japanese Medaka (Oryzias latipes)

Japanese medaka (Oryzias latipes) is a teleost fish and&#160;an emerging vertebrate model for ecotoxicology, developmental, genetics, and physiology research. Medaka is also used extensively to investigate vertebrate reproduction, which is an essential biological function as it allows a species to perpetuate. Sperm quality is an important indicator of male fertility and, thus, reproduction success. Techniques for extracting sperm and sperm analysis are well documented for many species, including teleost fish. Collecting sperm is relatively simple in larger fish but can be more complicated in small model fish as they produce less sperm and are more delicate. This article, therefore, describes two methods of sperm collection in the small model fish, Japanese medaka: testes dissection and abdominal massage. This paper demonstrates that both approaches are feasible for medaka and shows that abdominal massage can be performed a repeated number of times as the fish quickly recover from the procedure. This article also describes a protocol for computer-assisted sperm analysis in medaka to objectively assess several important indicators of medaka sperm quality (motility, progressivity, duration of motility, relative concentration). These procedures, specified for this useful small teleost model, will greatly enhance understanding of the environmental, physiological, and genetic factors influencing fertility in vertebrate males.

Sperm Collection and Computer-Assisted Sperm Analysis in the Teleost Model Japanese Medaka Oryzias latipes

This article describes two quick and efficient methods for collecting sperm from the small model fish medaka (Oryzias latipes), as well as a protocol for reliably assessing sperm quality using computer-assisted sperm analysis (CASA).

Japanese medaka (Oryzias latipes) is a teleost fish and&#160;an emerging vertebrate model for ecotoxicology, developmental, genetics, and physiology ...

U-Shaped Horizontal Swimming Technique for Preparing High-Quality Sperm with Low DNA Fragmentation Index

Human semen is a complex mixture comprising progressively motile spermatozoa, non-progressively motile spermatozoa, immotile spermatozoa, cell debris, and viscous seminal plasma. High-quality sperm refers to progressively motile spermatozoa with normal morphology, which often exhibit a lower DNA fragmentation index (DFI) and higher fertilization potential. Preparing high-quality sperm is a critical step in human-assisted reproductive technology. The traditional sperm preparation method, discontinuous density gradient centrifugation (DGC), is time-consuming and labor-intensive. Repeated centrifugation can damage sperm DNA, thereby affecting subsequent fertilization and embryo development. This study introduces a U-shaped horizontal swimming (UHS) method for preparing intracytoplasmic sperm injection (ICSI) sperm, which significantly eliminates the detrimental effects of&#160;centrifugation on sperm DNA.&#160;The UHS method involves creating a UHS lane using a fertilization medium within an ICSI operating dish. A 10 &#181;L fertilization medium microdroplet is placed at the starting point on the left side of the UHS lane to hold the semen. Two additional 10 &#181;L fertilization medium buffer droplets are positioned at intervals along the left middle section of the lane, with all droplets connected by fertilization medium. The dish is then covered with culture oil and incubated overnight at 37 &#176;C with 6% CO2 to equilibrate. Subsequently, 3 &#181;L of semen is added to the microdroplet at the starting point. High-quality spermatozoa swim to the right side of the UHS lane, facilitating their suction into the ICSI injection needle. Dead sperm, cell debris, and other viscous impurities largely remain at the initial point or in the buffer droplets. We simultaneously processed 21 semen samples using both UHS and DGC techniques and compared their DFI. The results demonstrated that the DFI in the DGC group was 5.5% &#177; 3.2%, whereas the DFI in the UHS group was 1.7% &#177; 1.1%. The difference between the two groups was statistically significant (P &#60; 0.05).

This protocol describes a method for screening high-quality sperm with a low DNA fragmentation index by utilizing sperm motility characteristics and thigmotaxis. The method employs a U-shaped horizontal swimming lane, enabling high-quality sperm to reach the opposite side through buffer droplets, while dead sperm, cell debris, and impurities are excluded.

Human semen is a complex mixture comprising progressively motile spermatozoa, non-progressively motile spermatozoa, immotile spermatozoa, cell debris, and ...

Fish Sperm Assessment Using Software and Cooling Devices

Podsumowanie

Przeglądaj więcej filmów

Rozdziały w tym wideo

Handling and Treatment of Male European Eels (Anguilla anguilla) for Hormonal Maturation and Sperm Cryopreservation

A High-Throughput Method For Zebrafish Sperm Cryopreservation and In Vitro Fertilization

Fluorescence in situ hybridization (FISH) Protocol in Human Sperm

Fluorimetric Techniques for the Assessment of Sperm Membranes

Two Types of Assays for Detecting Frog Sperm Chemoattraction

Cryopreservation of Zebrafish Spermatogonia by Whole Testes Needle Immersed Ultra-Rapid Cooling

Sperm Collection of Differential Quality Using Density Gradient Centrifugation

Functional Assessment of Kinesin-7 CENP-E in Spermatocytes Using In Vivo Inhibition, Immunofluorescence and Flow Cytometry

Sperm Collection and Computer-Assisted Sperm Analysis in the Teleost Model Japanese Medaka (Oryzias latipes)

U-Shaped Horizontal Swimming Technique for Preparing High-Quality Sperm with Low DNA Fragmentation Index