Intracerebroventricular Injection in Mouse: An Ommaya Mediated Direct Drug Administration Method to Deliver Drugs to Cerebral Ventricles of Mouse Brain

Protocolo

All procedures involving animal models have been reviewed by the local institutional animal care committee and the JoVE veterinary review board.

1. Murine Ommaya Assembly and Implantation

1. Preparation of station
   1. Disinfect the station surface. Place a blue covering over the surface and keep ready all sterilized tools and supplies indicated in Figure 1.
2. Presurgical procedure
   1. Apply analgesia (Bup-SR) and maintain sterile surgical environment.
3. Surgical implantation of Murine Ommaya
   1. Assemble the Murine Ommaya injection device using a 25G (0.51 mm outer diameter) miniature injection port and a 1 mm spacer disc. Use a cyanoacrylate sterile adhesive to ensure the penetration of approximately 2.5 mm of the metal cannula into the right cerebral hemisphere (Figure 2A–C).
      NOTE: An MRI-compatible Mouse Ommaya prototype was developed in this laboratory, which already has both parts (miniature injection port and spacer) 3D-printed together as a single unit (Figure 2D). The single unit version was tested by MRI and can save time by eliminating the assembly step.
   2. Anesthetize the mouse with 2–3% isoflurane until there are no signs of the righting reflex. Further, check for tail and/or paw pinch reflex to confirm the state of anesthesia.
   3. Shave the entire ventral surface of the head of fur and prepare the skin according to the sterile technique. Place the mouse in the stereotactic apparatus with a nose cone to continue isoflurane administration during the procedure; decrease the isoflurane to 1.5%. Gently tighten the ear bars to secure the head and apply eye lubricant to cover the eyes of the mouse.
   4. Make a small skin incision (3 mm), followed by blunt dissection of the underlying subcutaneous tissues to expose the skull. Dry the skull using hydrogen peroxide-soaked cotton-tipped applicator sticks.
   5. Drill a burr hole in the skull 0.5 mm posterior and 1.1 mm lateral of the bregma-the anatomical point on the skull where the coronal suture is intersected perpendicularly by the sagittal suture (Figure 2A), as well as a 0.9 mm burr hole to expose the dura mater. Move the microdrill aside, and gently score the bone immediately surrounding the burr hole prior to inserting an injection port (depth of approximately 2.5 mm), affixed to the skull using a cyanoacrylate sterile adhesive. State suture around the injection spot using 4-0 no-absorbance nylon sutures in an interrupted stitch pattern or purse string suture.
   6. House post-surgery mice in individual cages for surgery recovery.
      NOTE: It is possible that the Murine Ommaya may come off when multiple surgery-recovered mice are housed in the same cage, possibly due to constant tampering interactions. It is recommended that Murine Ommaya-implanted mice are housed individually (or no more than 2 mice per cage) over the course of the drug efficacy trial.

2. Murine Ommaya Treatment

1. Dosing mice using the Murine Ommaya
   1. Anesthetize the mouse with 2–3% isoflurane, until there are no signs of righting reflex. Further, check for tail and/or paw pinch reflex to confirm maintenance of anesthesia.
   2. Access the Murine Ommaya using a port injection adapter and a Hamilton syringe. Using forceps, hold the top of the miniature injection port and gently insert the port injector adaptor fully into the port's septum.
      NOTE: The port injector pierces the septum of the port in a manner that reduces dead space to a minimum and allows for controlled injection via a motorized syringe pump (Figure 3A). Targeted/novel treatments are injected at a flow rate of 1 µL/min while under anesthesia. The treatment is to be given at specified intervals (daily/weekly) for a set duration (weeks/months), according to the researcher's discretion.
      ​A volume between 3 and 7 µL is optimal, as a volume <3 µL is unreliable, and a volume >7 µL may cause too much pressure. The size of the Hamilton syringe can range from 10 to 100 µL, depending on the number of mice in each treatment arm. Preloading the appropriate volume into the Hamilton syringe will prevent repeated replacement of the syringe, thereby minimizing errors. It is best to dedicate 1 Hamilton syringe per treatment arm.
   3. Once the injection is made, detach the Murine Ommaya from the port injection adaptor using forceps, and return the mouse to the cage to recover from anesthesia.

Resultados

Figure 1: An example of a workstation setup for performing the Murine Ommaya implantation in mice. (1) Gas anesthesia machine/vaporizer. (2) Sterile blue paper drape covering a stereotaxic stand. (3) Stereotaxic device (stand/stage, ear bars, nose cone). (4) Microdrill. (5) Magnifying glass with light. (6) Sterile cotton-tipped applicator sticks with sterile saline rinse container. (7) Hydrogen peroxide. (8) Bead sterilizer.

Materiais

Name	Company	Catalog Number	Comments
1 mm spacer disc	Alzet, Durect Corporation	#0008670	Spacer disc only
4-0 ethilon nylon suture	Any vendor
Automatic syringe pumps	Harvard Syringe Pumps (or any vendor)	#70-4505	Pump 11 Elite
Bead sterilizer	Braintree Scientific Inc. (or any vendor)	#GER 5287-120V	Germinator 500
Buprenorphine Sustained-Release (Bup-SR)	Zoopharm		DEA controlled
Cyanoacrylate sterile adhesive	Any vendor
Gas inhalation anestehsia system	VeteEquip	#901812	COMPAC5
Hamilton microliter syringes	Hamilton		10, 25, 50, and 100 μL; 30G for cisterna magna injection
Hydrogen peroxide	Any vendor
IVIS 200 imaging system	Caliper Life Sciences
Magnifying glass with light	Any vendor
Microdrill	Stoelting (or any vendor)	#51555M
MRI imaging	Bruker	BioSpec series	Optional
Murine Ommaya (MRI-compatible) prototype	Instech Laboratories, Inc.	#VAB620-25MRI-3.3
PinPort injector	Instech Laboratories, Inc.	#PNP3M-50
PinPort	Instech Laboratories, Inc.	#1-PNP3F28-50
Rodent Surgical Instruments (Scissors, Forceps)	Roboz Surgical Instrument (or any vendor)
Stereotaxic device	Stoelting (or any vendor)	#51730M
Sterile blue paper/ drape covering	Any vendor
Sterile cotton sticks	Any vendor