The Joule-Thomson effect, also known as the Joule-Kelvin effect, describes the temperature change of a fluid when it is forced through a valve or porous plug while keeping it in a thermally insulated environment. This experiment is called a throttling process. This is an important effect widely used in refrigeration and the liquefaction of gases.

This experiment forces high-pressure gas through a throttle valve or a porous plug to a lower-pressure region. The gas expands as it passes through to the low-pressure region and occupies the volume, which is larger than the initial volume. Work is done on the gas when gas is forced through a throttle valve. However, when it expands, work is done by the gas on the surroundings. The temperature of the gas varies in this process; hence, it attains a new internal energy. The change in internal energy of the gas must be equal to the work done on the gas minus the work done by the gas. It is found that enthalpy is conserved (isenthalpic) in this flow process.

The change in temperature of the gas when pressure is reduced at constant enthalpy is given by the Joule-Thomson coefficient:

Equation1

Since the temperature of the gas varies, the Joule-Thomson coefficient can take either sign, depending on whether the gas becomes heated or cooled. The inversion curve in the T-p plane explains the heating and cooling of gas during the throttling process.

Figure1

The inversion curve separates the region of heating from the region of cooling. The maxima of the different isenthalps lie on the inversion curve. Note that an isenthalp is the locus of the end points of different throttling processes, starting at the same initial state. Depending on where the initial and final points are chosen, both heating and cooling effects can be produced during the throttling process.

The Joule-Thomson coefficient is zero for an ideal gas, indicating there is no temperature change when an ideal gas undergoes a throttling process. The coefficient is negative for real gases at extremely high and extremely low temperatures.

Теги
Joule Thomson EffectJoule Kelvin EffectTemperature ChangeThrottling ProcessRefrigerationLiquefaction Of GasesHigh pressure GasThrottle ValveInternal EnergyWork DoneEnthalpy ConservationIsenthalpic ProcessJoule Thomson CoefficientInversion CurveHeating And Cooling EffectsIdeal Gas

Из главы 20:

article

Now Playing

20.19 : Joule-Thomson Effect

The First Law of Thermodynamics

1.9K Просмотры

article

20.1 : Термодинамические системы

The First Law of Thermodynamics

4.4K Просмотры

article

20.2 : Работа, выполненная при изменении объема

The First Law of Thermodynamics

3.3K Просмотры

article

20.3 : Путь между состояниями термодинамики

The First Law of Thermodynamics

2.7K Просмотры

article

20.4 : Тепло и свободное расширение

The First Law of Thermodynamics

1.2K Просмотры

article

20.5 : Внутренняя энергия

The First Law of Thermodynamics

3.8K Просмотры

article

20.6 : Первый закон термодинамики

The First Law of Thermodynamics

3.4K Просмотры

article

20.7 : Первый закон термодинамики: решение проблем

The First Law of Thermodynamics

2.0K Просмотры

article

20.8 : Циклические процессы и изолированные системы

The First Law of Thermodynamics

2.5K Просмотры

article

20.9 : Изотермические процессы

The First Law of Thermodynamics

3.2K Просмотры

article

20.10 : Изохорные и изобарические процессы

The First Law of Thermodynamics

2.9K Просмотры

article

20.11 : Теплоемкость идеального газа I

The First Law of Thermodynamics

2.4K Просмотры

article

20.12 : Теплоемкость идеального газа II

The First Law of Thermodynamics

2.2K Просмотры

article

20.13 : Теплоемкость идеального газа III

The First Law of Thermodynamics

2.1K Просмотры

article

20.14 : Адиабатические процессы для идеального газа

The First Law of Thermodynamics

2.8K Просмотры

See More

JoVE Logo

Исследования

Образование

О JoVE

Авторские права © 2025 MyJoVE Corporation. Все права защищены