Methods to Classify Cytoplasmic Foci as Mammalian Stress Granules

Summary

Stress Granules (SGs) are nonmembranous cytoplasmic structures that form in cells exposed to a variety of stresses. SGs contain mRNAs, RNA-binding proteins, small ribosomal subunits, translation-related factors, and various cell signaling proteins. This protocol describes a workflow that uses several experimental approaches to detect, characterize, and quantify bona fide SGs.

Abstract

Cells are often challenged by sudden environmental changes. Stress Granules (SGs), cytoplasmic ribonucleoprotein complexes that form in cells exposed to stress conditions, are implicated in various aspects of cell metabolism and survival. SGs modulate cellular signaling pathways, post-transcriptional gene expression, and stress response programs. The formation of these mRNA-containing granules is directly connected to cellular translation. SG assembly is triggered by inhibited translation initiation, and SG disassembly is promoted by translation activation or by inhibited translation elongation. This relationship is further highlighted by SG composition. Core SG components are stalled translation pre-initiation complexes, mRNA, and selected RNA-binding Proteins (RBPs). The purpose of SG assembly is to conserve cellular energy by sequestering translationally stalled housekeeping mRNAs, allowing for the enhanced translation of stress-responsive proteins. In addition to the core constituents, such as stalled translation preinitiation complexes, SGs contain a plethora of other proteins and signaling molecules. Defects in SG formation can impair cellular adaptation to stress and can thus promote cell death. SGs and similar RNA-containing granules have been linked to a number of human diseases, including neurodegenerative disorders and cancer, leading to the recent interest in classifying and defining RNA granule subtypes. This protocol describes assays to characterize and quantify mammalian SGs.

Introduction

Cells employ many mechanisms to respond to stress. Some responses occur at the post-transcriptional level and involve regulating mRNA translation and/or stability^1,2. Stress-modulated mRNA translational arrest and degradation are associated with the formation of specific nonmembranous cellular foci, the most well characterized being Stress Granules (SGs)³. SGs are cytoplasmic foci that concentrate nontranslating mRNPs in translationally-arrested cells responding to stress (e.g., oxidation, heat shock, nutrient starvation, and viral infection)⁴. In addition to nontranslating mRNAs, SGs contain translation initiation factors, RNA-binding proteins, and various signaling proteins⁵. SGs are biomarkers of inhibited protein translation and altered RNA metabolism and have been linked to cell survival and apoptosis, signaling pathways, and nuclear processes⁵.

SGs are dynamic entities, and their formation is tightly connected to the status of cellular translation⁶. Despite their seemingly solid appearance, most SG protein components rapidly shuttle in and out, with a residence time of seconds. While SGs persist for minutes to hours, most of their components are in rapid flux. The inhibition of translation initiation and the consequent disassembly of translating polysomes promote the formation of SGs; thus, SGs are in equilibrium with translating polysomes. This polysome/SG equilibrium is key to distinguishing bona fide SGs from other stress-induced foci^6,7.

Arresting translation initiation entails the conversion of translation-competent pre-initiation complexes that contain mRNA, translation initiation factors (eIF), and 40S ribosomal subunits (so-called 48S complexes) into translationally stalled complexes (so-called 48S* complexes) that can coalesce into SGs^4,6. SGs are promoted by translational arrest at two different steps upstream of 48S complex formation: interference with the functions of the cap-binding eIF4F complex (e.g., targeting its eIF4A subunit) or phosphorylation of the α subunit of translation initiation factor eIF2, mediated by one or more of the four eIF2 kinases. The presence of stalled 48S complexes (i.e. 40S ribosomal subunits and selected translation initiation factors) is a hallmark of SGs^8,9.

SGs have been linked to various pathological states, such as viral infections, neurodegeneration, autoimmunity, and cancer^{3,10,11,12,13}. Mutated forms of several SG components are associated with neurodegenerative diseases (e.g., amyotrophic lateral sclerosis) in which neurons display intracellular pathological inclusions that may play active roles in neuronal death¹³. Some viruses hijack SG components to inhibit SG formation and to enhance viral replication¹⁴. Recent studies also link SGs to cancer¹⁵ and to cancer cell survival under chemo- and radiotherapy treatments^{10,16,17,18,19,20}. While such findings have stimulated great interest in SG biology, many of the published reports lack important controls to distinguish the formation of bona fide SGs from other stress-induced foci.

SGs were initially described as nonmembranous cytoplasmic foci composed of selected mRNA-binding Proteins (RBPs), including T-cell ntracellular antigen 1 (TIA-1) and Poly-A-binding Protein (PABP); translation initiation factors; polyadenylated mRNA; and small ribosomal subunits^4,6,21,22. Traditionally, their composition has been determined by techniques such as immunostaining and the ectopic expression of fluorescently tagged proteins^23,24. Due to their highly dynamic nature, the immunolocalization of SG proteins and/or mRNAs remains the defining methodology for detecting SGs^23,24. To date, many RBPs and other proteins (over 120 distinct proteins) are described as SG components¹¹. As many SG-localized proteins change their localization in both a stress-dependent and an independent manner and can accumulate at other intracellular compartments and foci, it is important to choose correct SG markers and to employ functional criteria to distinguish SGs from other types of stress-induced foci. Bona fide SGs contain mRNA, translation initiation factors, and small ribosomal subunits and are in dynamic equilibrium with translation.

This simple workflow is designed to determine whether stress-induced foci are bona fide SGs. This workflow includes several experimental approaches using U2OS cells, cells commonly used to study SGs. These cells are ideal, as they have a large cytoplasm, are relatively flat, and attach strongly to glass coverslips. Other cell types can be used to study SGs, but it is important to be aware that differences in timing, drug concentration, and abundance of SG-nucleating proteins can alter the kinetics and composition. Additionally, some cells respond to paraformaldehyde fixation by forming cell surface blebs, giving then a ruffled appearance that causes the punctate localization of some SG markers; without careful analysis, these can be misclassified as SGs. This highlights the necessity of assessing all criteria required to identify stress-induced foci as bona fide SGs. Vinorelbine (VRB), a cancer therapeutic that promotes SGs²⁰, as well as Sodium Arsenite (SA), a robust and well-characterized SG inducer, are used as stresses for the experiments in this protocol.

Canonical SGs contain multiple SG markers (both proteins and mRNAs) that colocalize in cytoplasmic foci. This protocol uses both immunofluorescence and fluorescence in situ hybridization (FISH) to detect the localization of protein markers and polyadenylated mRNA²², respectively. Briefly, indirect immunofluorescence uses antibodies (i.e. primary antibodies) specific for a given protein to detect it within the cell. Then, secondary antibodies (usually species-specific) attached to fluorochromes recognize the primary antibody and reveal the target protein localization. Fluorescent microscopy is used to detect the localized signal within the cell. Using antibodies produced in different species and detecting them with differently colored secondary antibodies allows for the detection of the colocalization of multiple antibodies, indicating that their protein targets are found in the same location²³. It is important to select markers that have been verified to colocalize at bona fide SGs.

FISH uses a labeled probe that base-pairs to a specific RNA or DNA sequence²⁵. To detect mRNA, this protocol uses a biotinylated oligo(dT)₄₀ probe that hybridizes (or base-pairs) to the polyA tail of mRNA (i.e. polyA FISH). The biotinylated probe is then detected using fluorescently conjugated streptavidin, as streptavidin has a high affinity for biotin. When assessing SGs, it is important to couple polyA FISH with immunofluorescence detecting an SG marker, as in bona fide SGs, the two signals should colocalize.

Using this protocol, colocalization is assessed in multiple ways. In a multi-channel (i.e. RGB: red, green, and blue) image, colocalization will alter the color of the overlapped signal (e.g. colocalized red and green appear yellow)²³. Additionally, colocalization is quantified graphically using line scan analysis, where the intensity of each of color is measured across a given line^8,20. This protocol describes two line scan analysis procedures using ImageJ²⁶. One procedure is manual and goes through the entire process, while the other uses a macro, or a simple program that automates the manual steps. It is important to go through the manual program to understand the macro procedure.

SGs form in cells where translation is repressed; therefore, cells with SGs should display decreased levels of global translation compared to untreated cells. Experimentally, ribopuromycylation is used. Puromycin and emetine are added to cells for a short duration prior to fixation, allowing the puromycin to incorporate into actively forming polypeptides, causing termination^27,28. Treatment with emetine is required to prevent re-initiation²⁹. Puromycin can then be detected using anti-puromycin antibody, giving a snapshot of active translation. This method is used because it is quick, does not require pre-starving with a medium lacking a particular amino acid (and potentially prestressing the cells), and reveals the subcellular localization of protein translation. Other methods, notably using modified amino acid analogs, such as the methionine analog L-azidohomoalaine (AHA), coupled with "click-it" chemistry³⁰, have been used to show that cells containing SGs exhibit much lower translation than neighboring cells³¹. However, this technique requires methionine starvation followed by pulse-labeling for 15-30 min. Methionine starvation constitutes an additional stress, while the long labeling time (i.e. 15-30 min) results in the measurement of cumulative rather than ongoing translation and also allows the newly-synthesized proteins to move from their site of synthesis to their final destination within the cell. In contrast, ribopuromycylation is much faster and is compatible with any medium, such as the glucose-free medium used to induce SGs via glucose starvation.

Canonical SGs are in dynamic equilibrium with actively translating polysomes. This can be assessed experimentally by treating samples with the drugs that stabilize or destabilize polysomes, thus tipping the balance between SGs and polysomes²³. Cycloheximide (or emetine, which behaves similarly) blocks elongation by "freezing" ribosomes onto mRNA, thus decreasing the pool of available non-polysomal mRNPs able to form SGs. Experimentally, this can be used in two ways: by adding cycloheximide (or emetine) before stress to prevent SG formation or by adding cycloheximide (or emetine) after the SGs have formed, even without removing the stressing agent, causing SG disassembly, as stalled preinitiation complexes are slowly admitted into the polysome fraction. In contrast, puromycin causes premature termination and promotes polysome disassembly, increasing the pool of initiating mRNAs capable of assembling into SGs. Experimentally, puromycin treatment increases the number of SGs or lowers the threshold at which they form in response to graded stress or drug dosage. When assessing the effect of puromycin, it is important to use a sub-maximal level of the drug of interest, as puromycin is expected to augment the effect of the drug and to increase the percent of cells displaying SGs – this cannot occur if the drug/stress causes SGs in 100% of the cells initially. This contrasts with cycloheximide treatment, which disassembles SGs and works best when ~95% of the cells initially display SGs so that the largest possible decrease can be observed and accurately quantified.

This protocol provides a framework to study SGs in mammalian cells. Methods include: (1) immunofluorescent staining and ImageJ analysis to assess the colocalization the classic SG-associated markers eIF4G, eIF3b, and Ras GTPase-activating protein-binding protein 1 (G3BP1) in putative SGs; (2) oligo(dT) fluorescence in situ hybridization (polyA FISH) to detect polyadenylated mRNA; (3) cycloheximide and puromycin treatment to determine whether stress-induced foci are in dynamic equilibrium with polysomes; and (4) ribopuromycylation to assess the translational status of cells containing putative SGs. Together, these assays can determine whether stress-induced foci can be classified as bona fide SGs.

Protocol

1. Cell Preparation

1. Add autoclaved coverslips to 12 wells of a 24-well plate, as indicated in Figure 1A; this can be done using a sterile Pasteur pipette attached to a vacuum to pick up each coverslip. Gently tap the coverslip on the side of the well to release the suction, allowing the coverslip to fall into the well.
2. Plate 1 x 10⁵ U-2 OS (U2OS) osteosarcoma cells per well at a final volume of 500 µL of medium. Move the plate side to side and up and down several times to ensure that the cells are evenly distributed.
3. Gently press the coverslips down with a clean P1000 tip to ensure that the coverslip is on the bottom of the well and that there are no bubbles under the coverslip.

2. Stressing Cells

1. The following day, visually check the plate to ensure that the cells are evenly dispersed and evenly confluent across the coverslip, as variations between samples may adversely impact the reproducibility of results. Use a 10X objective on an inverted tissue-culture microscope.
2. Preheat the medium to 37 °C. Avoid applying cold or hot media to the cells, as these cause cold shock or heat shock, respectively.
3. Dilute drugs in preheated media. For each different drug concentration, prepare 2 wells containing 500 µL of medium. Prepare an additional 500 µL to allow for loss while pipetting. Aliquot 4 tubes, each containing 1.5 mL.
   1. For sodium arsenite: to each well containing 500 µL, add 1.5 µL of 100 mM sodium arsenite (final concentration: 100 µM) or add 0.75 µL of 100 mM sodium arsenite (final concentration: 50 µM).
   2. For vinorelbine: to each well containing 500 µL, add 22.5 µL of 10 mM vinorelbine (final concentration: 150 µM) or add 18.75 µL of 10 mM vinorelbine (final concentration: 100 µM).
      NOTE: Sodium arsenite is a well-characterized and commonly used stress granule inducer and is therefore classically used as a positive control.
4. Remove and discard the media from wells B1 - 4 and C1 - 4. Add the media with drugs and wait for 60 min (Figure 1A).
   1. Add 500 µL of medium with 100 µM sodium arsenite to wells B1 and B2. Add 500 µL of medium with 50 µM sodium arsenite to wells B3 and B4.
   2. Add 500 µL of medium with 150 µM vinorelbine to wells C1 and C2. Add 500 µL of medium with 125 µM vinorelbine to wells C3 and C4.
5. 30 min prior to fixation, treat the wells in column 2 with 5 µL of cycloheximide (1 mg/mL stock) and the wells in column 4 with 2 µL of puromycin (1.25 mg/mL stock). Gently rock the plate to mix before placing the plate back in the 37 °C incubator.

3. Cell Fixation and Immunofluorescence

NOTE: Before the experiment, ensure that the methanol is cooled to -20 °C. Make buffers, including Phosphate-buffered Saline (PBS), 5% Normal Horse Serum (NHS) in PBS, and 4% paraformaldehyde (PFA) in PBS.

1. Discard the media and wash the wells containing coverslips with PBS. Depending on the drugs used, it might be important to properly discard the media containing drugs; contact the local environmental safety office for specific instructions. To wash efficiently, fill a squeeze bottle with PBS, cut back the tip in order to allow a gentle flow rather than a tight stream, and use this to add PBS to each well after aspirating the original PBS.
2. Fix the cells using ~250 µL of 4% PFA for 15 min at RT under gentle agitation. Completely cover the top of the coverslip with PFA; 250 µL should be sufficient, but if not, add more. Always avoid pipetting directly onto the coverslips, as some cells (or stress treatments of cells) can alter attachment, and the force from pipetting can dislodge the cells.
3. Remove the PFA and discard properly. Contact the local environmental safety office for details on how to properly discard paraformaldehyde.
4. Add ~250 µL of methanol (-20 °C) and incubate for 5 min at RT under gentle rocking; this both permeabilizes and flattens the cells.
5. Remove and discard the methanol and block the cells by applying ~250 µL of 5% NHS for 1 h at RT O/N at 4 °C. Contact the local environmental safety office for details on how to properly discard of methanol.
6. For primary antibodies, dilute the antibodies in 5% NHS.
   NOTE: The use of multiple SG markers is key to confirming whether the granules observed are bona fide SGs. The number of SG markers that can be used depends on the filters available in the microscope. If standard green, red, and far-red filter sets are available, use G3BP1, eIF4G, and eIF3b at a 1/250 dilution.
   1. For this experiment (12 coverslips at 250 µL each-Total: 3 mL of 5% NHS), add 12 µL of each of the following: anti-G3BP1, anti-eIF3b, and anti-eIF4G. Incubate the primary antibodies using gentle agitation for at least 1 h at RT or O/N at 4 °C.
7. Wash the wells 3x with PBS, and incubate each wash for 5 min.
8. For secondary antibodies, dilute all secondary antibodies (1/250 dilution) and Hoechst dye (1/1,000 dilution) in 5% NHS.
   1. For this experiment (12 coverslips at 250 µL each-Total: 3 mL of 5% NHS), add 12 µL of each of the following: Cy2-Mouse, Cy3-Rabbit, and Cy5-Goat (a 1/250 dilution of each) and add 3 µL of Hoechst dye.
   2. Incubate the coverslips with the secondary antibodies for 1 h at RT. During this and the following steps, protect the samples from light by covering the plate with a box or by placing foil over the top of the tissue culture dish.
9. Wash the wells three times with PBS for 5 min each.
10. Mount the coverslips onto labeled glass slides using mounting medium. Heat the mounting medium in a 37 °C heat block for 10 min; this decreases the viscosity and makes it easier to pipette. With a cut P200 tip, pipette 25 µL of mounting medium per coverslip onto a glass slide; 4-8 coverslips can fit on one glass slide, assuming that the microscope stage allows this. Using fine forceps, transfer the coverslip from the well to the slide, making sure to put the cell side down on the mounting medium. Using a clean P200 tip, press the coverslip down.
11. Once all the coverslips have been mounted, use folded lab tissue to clean up excess mounting medium by pressing the lab tissue very firmly onto the slide. Use a squeeze bottle containing H₂O to flush off the excess mounting medium and then repeat the blotting with folded lab tissue to remove the water.

4. Fluorescence In Situ Hybridization (FISH)

1. Plate and treat the cells, using steps 1 and 2.1-4 as a guide; it is only necessary to plate the cells in column 1, as only 3 coverslips are needed in the following experiment.
2. Ensure that all buffers are prepared (i.e. 4% PFA in PBS, 70% ethanol in water, 2x Saline-Sodium-Citrate (SSC), and 5% NHS), that the methanol is cooled down to -20 °C, and that the hybridization oven is warmed up to the appropriate temperature.
3. Carry out steps 3.1-3.3 to wash and fix the cells.
4. Permeabilize cells by adding -20 °C methanol for 10 min.
5. Remove the methanol and incubate the coverslips in 70% ethanol. Place the plate at 4 °C overnight. Seal the plate using parafilm to prevent evaporation.
6. The following day, remove the ethanol and rehydrate the cells by adding 500 µL of 2x SSC. Incubate the coverslips for 5 min with gentle agitation at RT.
7. Remove the 2x SSC and add 500 µL of 2X SSC. Incubate for 5 min under gentle agitation.
8. Place a piece of parafilm flat on the bottom of the hybridization oven. Pipette 25 µL of hybridization buffer onto the parafilm for each coverslip. Remove the coverslip from the 24-well dish (at this point, the coverslips are cell-side up) and place the coverslip cell-side down on the hybridization buffer. Do this at 42 °C or optionally at 65 °C for 15 min.
   NOTE: Completing this step at 65 °C will denature cellular RNAs; this can improve the signal if the polyA is masked by interactions with proteins.
9. Dilute the Biotin-Oligo(dT) probe (100 ng/µL) in hybridization buffer to a concentration of 2 ng/µL; 25 µL per coverslip is sufficient.
10. For each coverslip, pipette 25 µL of hybridization buffer containing Biotin-Oligo(dT) onto the parafilm. Pick up the coverslip with forceps and gently touch the edge of the coverslip onto a lab tissue to remove excess hybridization buffer. Transfer the coverslip to the hybridization buffer with Biotin-Oligo(dT); remember to keep the cell side down.
11. Place the coverslips in a hybridization box to limit evaporation. Incubate the coverslips with Biotin-Oligo(dT) in hybridization buffer for 60 min at 42 °C.
12. Place 2x SSC in the hybridization oven to allow it to equilibrate to 42 °C.
13. Add ~500 µL of warmed 2x SSC to the wells in the 24-well dish and use forceps to transfer the coverslips to the well. Incubate for 10 min.
14. Repeat the above wash step twice at 42 °C and then twice at RT.
15. Complete steps 3.5-3.10, making sure to use a streptavidin fluorochrome to detect the Biotin-Oligo(dT) instead of one conventional antibody.

5. Ribopuromycylation Assay to Assess Translational Status

1. Plate U2OS cells on coverslips, as indicated in step 1, but only plate one coverslip per condition (in this case, 3 coverslips: nontreated, 100 µM sodium arsenite, and 150 µM vinorelbine) (Figure 1A).
2. Stress cells using the protocol in step 2, completing steps 2.1-2.4.
3. 5 min before fixation, add 2 µL of puromycin (stock: 1.25 mg/mL; dilute 2 µL in 500 µL to obtain a final puromycin concentration of 5 µg/mL) and 2.9 µL of emetine (stock: 20 µg/mL; add 2.9 µL to the same solution already containing the puromycin) to each well containing 0.5 mL.
4. Complete steps 3.1-3.10 as indicated above, using an anti-puromycin antibody (1/1000 dilution) to detect puromycin. Ideally, use two other SG markers in the remaining channels.
5. When quantifying the puromycin signal, take all images using the same exposure. Choose this exposure by using the brightest (unstressed) sample and taking an image as bright as possible without saturation.
   NOTE: The intensity of the anti-puromycin fluorescent signal represents ongoing translation, as puromycin substitutes for an amino acid, incorporates into the nascent protein, and enforces the premature termination of the protein.

6. Image Acquisition and Analysis

1. Quantifying Stress Granules
   1. To quantify SGs, acquire 3 - 5 images totaling >100 cells per sample using a 40X objective. Alternatively, acquire images using other objectives, but ensure that >100 cells are counted per coverslip and that the magnification is large enough to clearly visualize the granules. Do this by dividing the coverslip into five roughly equal regions and randomly selecting a field from each region (Figure 1B); images of the same field should include all channels to assess the colocalization of markers.
   2. Once all images have been acquired, merge the channels. Some camera software will automatically do this, while others require manual merging; this can be done with ImageJ by opening all the images and then selecting [Image | Color | Merge Channels].
   3. Manually count the total number of cells by counting the number of nuclei, using Hoechst as the nuclei marker. Manually count the number of cells that contain more than two SGs per cell.
      NOTE: For example, using a merged three-channel image displaying G3BP1 (green), eIF4G (red), and Hoechst (blue), count the nuclei (or number of cells) using the blue channel. Then, count SG-positive cells as those with two or more yellow foci per cell. The granules will appear yellow, as green from G3BP1 and red from eIF4G appear yellow if colocalized.
   4. Determine the percentage of cells that are SG positive by combining the data from the 3-5 independent regions and then calculate:
      number of SG positive / number of nuclei) *100 = percent of SG-positive cells
2. Assessing Colocalization by Line Scan Analysis – Manual Method
   1. Open ImageJ. Download it for free from ()
   2. Open the ROI manager: [Analyze | Tools | ROI manager…].
   3. Open the merged image in ImageJ: [File | Open].
   4. Using the line tool located in the ImageJ toolbar, add a line that goes through an SG, making sure to include before and after the SG. Add this line to the ROI manager by clicking [Add] in the ROI manager window.
   5. Split the merged image into separate channels to assess the localization of each marker to the granule: [Image | Color | Split Channel]; this will split the merged image into three black-and-white images.
   6. In the black-and-white image, make sure that the line is selected; the line is selected if it appears in the image. If not, in the ROI manager window, click on the line in the panel; this will highlight the line in blue in the ROI manager window and will make the line visible on the black-and-white image. If the line still does not appear, be sure that "show all" is checked in the ROI manager and then click on the line in the image.
   7. Analyze the intensity of the line: [Analyze | Plot Profile]; this will bring up the "Plot Profile" window, which plots the intensity of the signal across the line.
   8. Within the "Plot Profile" window, click [List], which brings up a window containing the raw data from the graph. Copy all the data in this window and paste it into a spreadsheet file. To do this, select all the data in the window: [Edit | Select All]. Copy the date: [Edit | Copy]. Open a spreadsheet file and paste the data: [Edit | Paste].
   9. Complete steps 6.2.6 - 6.2.8 for each channel separately. Be sure to keep track of the channel being assessed.
   10. In a spreadsheet, generate a line graph of the results. Select the columns that include data by pressing [control] and clicking on the letter at the top of each column. Then, select line graph: [Insert | Line graph].
   11. Repeat this analysis for multiple stress granules across multiple independent experiments.
3. Assessing Colocalization by Line Scan Analysis – ImageJ Plugin
   1. Download and install the RGB profile tool from the ImageJ website (https://imagej.nih.gov/ij/macros/tools/RGBProfilesTool.txt); when correctly installed, a red, green, and blue (RGB)-lined icon should appear in the toolbar.
   2. Open the image (e.g., Tiff, JPG) in ImageJ: [File | Open].
   3. Click on the RGB icon located in the ImageJ toolbar.
   4. Click and drag to add a line that extends through an SG, making sure to include adjacent regions; an image of the histogram will appear in a pop-up window.
   5. Save the data as an image: [File | Save As | Tiff]. Alternatively, export and then graph the data in another graphing program using step 6.2.8 from above.

Results

Stress-induced foci are not necessarily SGs. SGs are classified as cytoplasmic foci that contain mRNAs, translation initiation factors, and RNA-binding proteins and are in equilibrium with active translation. The above protocol can be used as a template to characterize whether a given stress induces bona fide SGs.

SGs colocalize with other known SG markers, including both proteins and mRNA. SA and VRB induce cytoplasmic...

Discussion

As evidenced by immunohistological studies in multiple diseases, chronic stress leads to the formation of different intracellular foci. For example, most neurodegenerative diseases are characterized by intracellular aggregates of insoluble proteins. The presence of SG-associated proteins in such aggregates is often the basis for concluding that such foci are SGs. A similar conclusion is also drawn when SG marker-positive cytoplasmic foci are observed in cells treated with new stress stimuli. This protocol provides a simp...

Materials

Name	Company	Catalog Number	Comments
U-2 OS	ATCC	ATCC®HTB-96™	- commonly written as "U2OS" - culture at 37 °C under 5% CO2 in 10% FBS/DMEM
Dulbecco's Modification of Eagle's Medium	Corning	10-013-CV	- abbreviated DMEM - contains 4.5 g/L glucose, pyruvate, and phenol red - supplemented with 10% FBS, 10 mM HEPES, and penicillin/steptomycin - prewarm prior drug(s) dilution
Fetal Bovine Serum	Sigma	F2442-500ml	- abbreviated FBS - used to supplement media
HEPES (1 M)	Thermo Fisher Scientific	15630-080	- used to supplement media
penicilline streptomycine	Sigma	P0781-100ml	- used to supplement media
24 well plate	Costar	3524
lab tissues	KIMTECH SCIENCE	34120	- commonly called "kimwipes"
Coverglass for Growth Cover Glasses	Fisher Scientific	12-545-82	- autoclaved before used - keep sterile in the tissue culture hood
Sodium (meta)arsenite ≥90%	Sigma	S7400-100G	- commonly called sodium arsenite and abbreviated SA - dissolution in water at 1 M concentration, then dilute to 100 µM as a working stock
Vinorelbine	TSZ CHEM	RS055	- abbreviated VRB - dissolve in water to 10 mM
Puromycin	Sigma	P9620	- used to assess translation level (ribopuromycylation) - used to assess SG connection with active translation - dilute in water to 10 mg/mL
Emetine dihydrochloride hydrate	Sigma	E2375	- used in combination with puro to assess general translation level - used to assess SG connection with active translation - dilute in water to 10 mg/mL
Cycloheximide	Sigma	C4859	- abbreviated CHX - used to assess SG connection with active translation - dilute in water to 10 mg/mL
Phosphate Buffered Saline	Lonza / VWR	95042-486	- abbreviated PBS - wash buffer for immunofluorescence
Paraformaldehyde reagent grade, crystalline	Sigma	P6148-500G	- make a 4% solution in hot PBS in fume hood, stir until dissolved - aliquots can be stored at - 20 °C for several months - hazardous, use ventilation - discard in special waste
Methanol, ACS	BDH / VWR	BDH1135-4LP	- pre-chilled to -20°C before use - discard in special waste
Normal Horse Serum	Thermo Fisher Scientific	31874	- abbreviated NHS - dilute to 5% in PBS - add sodium azide for storage at 4°C - blocking solution for immunofluorescence
Ethanol, Pure, 200 Proof (100%),USP, KOPTEC	Decon Labs / VWR	89125-188	- dilute to 70% with water
Fisherbrand Superfrost Plus Microscope Slides	Fisherbrand	12-550-15
mouse anti G3BP1 antibody (TT-Y)	Santa Cruz	sc-81940	- store at 4 °C - use at 1/100 dilution
rabbit anti eIF4G antibody (H-300)	Santa Cruz	sc-11373	- store at 4 °C - 1/250 dilution
goat anti eIF3η (N-20) antibody	Santa Cruz	sc-16377	- eIF3η is also known as eIF3b - store at 4 °C - 1/250 dilution
mouse anti puromycin 12D10 antibody	Millipore	MABE343	- store at 4 °C - 1/1000 dilution
Cy2 AffiniPure Donkey Anti-Mouse IgG (H+L)	Jackson Immunoresearch	715-225-150	- reconstitute in water as per manufacturer’s instructions then store at 4°C - 1/250 dilution
Cy3 AffiniPure Donkey Anti-Rabbit IgG (H+L)	Jackson Immunoresearch	711-165-152	- reconstitute in water as per manufacturer’s instructions then store at 4°C - 1/2500 dilution
Cy5 AffiniPure Donkey Anti-Goat IgG (H+L)	Jackson Immunoresearch	705-175-147	- reconstitute in water as per manufacturer’s instructions then store at 4°C - 1/250 dilution
Hoechst 33258 solution	Sigma	94403-1ML	- incubate with secondary antibodies -stock solution 0.5 mg/mL in dH20, protect from light - Store at 4 °C
Cy3 Streptavidin	Jackson Immunoresearch	016-160-084	- reconstitute in water as per manufacturer’s instructions, then store at 4°C - 1/250 dilution
oligo-(dT)40x probe biotinilated	Integrated DNA Technologies (IDT)	/	- reconstitute in water to 100 ng/mL, aliquot and store at -20°C - dilute in hybridation buffer 1/50 prior to use - custom order
hybridation box	/	/	- make a moisture chamber with any storing slide box by adding humidified paper on the bottom - prewarm the box prior use
20 x SSC buffer	Thermo fisher Ambion	AM9763	- dilute to 2X SSC using RNase Free water (DEPC treated) - store at room temperature - wash buffer for FISH
PerfectHybPlus Hybridization Buffer	Sigma	H7033-50ml	- block and probe incubation buffer for FISH
slide mounting media	home made	/	- mix 5 g of “cold-soluble” poly(vinyl alcohol) in 20 ml of PBS - mix by sonication, followed by stirring overnight at RT - Add 5 ml of glycerol and 0.2 ml of 20 % sodium azide, and stir for 16 h at RT - centrifugation at 20,000 g for 20 min, discard large pellet - aliquot viscous liquid, long-term storage at -20°C, 1 week at 4°C
Parafilm "M"	Sigma	P7793-1EA	- usually referred as "parafilm"
Poly(vinyl alcohol)	Sigma	P-8136-250G	- reagent to make vinol
Glycerol	Sigma	G5516-100ML	- reagent to make vinol
sodium azide	Fisher Scientific	S2002-5G	- preservative agent for blocking solution and vinol - make a 20 % dilution in water