fabrication of square pyramidal microwells for tumor spheroid fabrication

Fabrikasyon ve ardından tümör sferoidlerinin PEG hidrojellerinde 3D kapsüllenmesi

Tumor spheroids have emerged as useful in vitro tools in studying cancer etiology, pathology, and drug responsiveness1. Traditionally, spheroids have been cultured in conditions such as low adhesion plates or bioreactors, where cell-cell adhesion is favored over cell-surface adhesion2. However, it is now recognized that to recapitulate the tumor microenvironment more faithfully, in vitro spheroid models should capture both cell-cell and cell-matrix interactions. This has prompted multiple groups to design scaffolds, such as hydrogels, where spheroids can be encapsulated3,4. Such hydrogel-based spheroid models enable the elucidation of cell-cell and cell-matrix interactions on various cell behaviors, such as viability, proliferation, stemness, or therapy responsiveness3.
Here, we describe a protocol for the encapsulation of glioblastoma spheroids in polyethylene glycol (PEG) hydrogels. There are multiple literature reports of glioblastoma cell spheroid encapsulation in hydrogels. For example, spheroids were formed by encapsulating U87 cells in PEG hydrogels decorated with an RGDS adhesive ligand and crosslinked with an enzymatically cleavable peptide to determine the effect of hydrogel stiffness on cell behavior5. U87 cells have also been formed in other PEG-based or hyaluronic acid-based hydrogels to expand the cancer stem cell population6 or to explore matrix-mediated mechanisms of chemotherapy resistance7,8,9. Glioblastoma spheroids have also been encapsulated in gelatin hydrogels to study the crosstalk between microglia and cancer cells and its effect on cell invasion10. Overall, such studies have demonstrated the utility of hydrogel-based in vitro models in understanding glioblastoma pathology and devising treatments.
Further, there are different methods for tumor spheroid fabrication and hydrogel encapsulation11. For example, dispersed cells could be seeded in hydrogels and allowed to form spheroids over time5,12. One drawback of such a method is the polydispersity of the formed spheroids, which could lead to differential cell responses. To produce uniform spheroids, cells could be encapsulated in microgels and cultured for extended periods until they invade and remodel the gel13, or cells could be deposited in templated gels with spherical &#39;holes&#39; and allowed to aggregate14. The drawback of these methods is their relative complexity, the need for a droplet generator or other means to form microgels or the &#39;holes&#39; in the gel, and the time it takes for spheroids to grow and mature. Alternatively, spheroids could be pre-formed in microwells9,15,16 or in hanging-drop plates17,18 and then encapsulated in a hydrogel, similar to the technique described here. These methods are simpler and can be done in a higher throughput fashion. Interestingly, it has been shown that the method of spheroid formation can affect spheroid cell behaviors, such as gene expression, cell proliferation, or drug responsiveness19,20.
Here, we focus on glioblastoma since it is a solid tumor whose native environment is the soft, nanoporous brain matrix21, which can be mimicked by a soft, nanoporous hydrogel. Glioblastoma is also the deadliest brain cancer for which there is no available cure22. However, the protocol described here can be used for the encapsulation of spheroids representing any solid tumor. We chose to use PEG hydrogels that are formed through a Michael-type addition reaction23. PEG is a synthetic, non-degradable, and biocompatible hydrogel that is inert and serves as scaffolding and physical cell support but does not support cell attachment23. Cell adhesiveness can be added separately via tethering of whole proteins or adhesive ligands24, and degradability can be added via chemical modifications of the PEG polymer chain or hydrolytically or enzymatically degradable crosslinkers25,26. This allows for biochemical properties to be tuned independently of mechanical or physical hydrogel properties, which could be advantageous in studying cell-matrix interactions. The Michael-type gelation chemistry is selective and happens at physiological conditions; hence, it allows for spheroid encapsulation by simply mixing the spheroids with the hydrogel precursor solution.
Overall, the methodology presented here has several notable characteristics. First, fabricating tumor spheroids in a multiwell assembly is efficient, quick, and the cost of the required materials is low. Second, the spheroids are produced in large batches in a variety of sizes with low polydispersity. Finally, only commercially available materials are required. The utility of the methodology is illustrated by exploring the effect of substrate properties on spheroid cell viability, circularity, and cell stemness.

Yazar Spotlight: Glioblastoma Mikroçevre Çalışması için İn Vitro Hidrojel Modeli

Sferoid-Matriks Etkileşimlerini İncelemek için Polietilen Glikol Hidrojellerde Tümör Sferoid Üretimi ve Kapsüllenmesi

Our lab focuses on designing in vitro hydrogel models for glioblastoma steroid encapsulation to mimic the tumor extracellular microenvironment. The effective substrate, mechanical and biochemical properties on steroid cell viability, circularity, stemness, and spreading are investigated with such models. Current experimental challenges in tumor module development revolve around a desire for complexity to mimic all aspects of the tumor microenvironment for physiological relevance, and also a desire for simplicity to make the model accessible, robust, low cost, and easy to use, and compatible with multiplex screening approaches.We present a protocol that enables fast, robust, and low-cost fabrication of tumor steroids and encapsulation in hydrogels made to mimic the tumor microenvironment. The model does not require any specialized equipment. It will be particularly useful for exploring steroid matrix interactions in building in vitro tissue physiology or pathology models.Understanding the interactions between glioblastoma cancer cells and their microenvironment can encourage development of new therapies to better treat this cancer. Furthermore, development of an in vitro model for glioblastoma cancer can enhance development of this model for other cancer diseases.

Tümör Sferoid Üretimi için Kare Piramidal Mikrokuyuların İmalatı

Başlamak için, altı kuyulu kare parametal ana kalıbın bir kuyucuğuna iki gram veya yaklaşık bir mililitre negatif PDMS öncü çözeltisi dökün. Ana kalıbı PDMS ile kapladıktan sonra, çözeltinin gazını almak için plakayı vakumlu bir kurutucuya yerleştirin. Ardından, PDMS'yi iyileştirmek için plakayı 24 saat boyunca 60 santigrat derecede bir fırına koyun.PDMS sertleştiğinde ancak hala sıcak olduğunda, PDMS kalıbını ana kalıptan dikkatlice çıkarmak için bir spatula kullanın. Daha sonra bir biyopsi zımbası ile 35 milimetre çapında bir levha halinde kesin. Düzgün kesilmiş PDMS kalıbını bir Petri kabına yerleştirin ve oda sıcaklığında 24 saat daha kürlemeye devam etmek için kapakla örtün.Pozitif PDMS kalıbını hazırlamak için, dokulu mikro kuyucuklar yukarı bakacak şekilde 35 milimetrelik bir Petri kabına 35 milimetrelik bir negatif PDMS kalıbı yerleştirin. Petri kabındaki negatif kalıba 2,5 gram veya yaklaşık 1,2 mililitre pozitif PDMS öncü çözeltisi dökün. Öncü çözeltiyi 30 santigrat derecede fırına koymadan önce 60 dakika gazdan arındırın.Sertleştikten sonra kalıpları Petri kabından çıkarın. Pozitif kalıbı hemen negatif kalıptan soyun. Pozitif kalıpları plakalar halinde kesmek için 10 milimetrelik bir biyopsi zımbası kullanın.Ardından, her 10 milimetrelik pozitif kalıbın düz tarafını önceden hazırlanmış PDMS tutkal öncü çözeltisine hafifçe daldırmak için cımbız kullanın. 48 oyuklu bir plakanın kuyucuğuna kuyucuk başına bir kalıbı dikkatlice yerleştirin. Kuyu dibine yapıştırmak için her kalıbı hafifçe bastırın.Tutkalı sertleştirmek için monte edilmiş plakayı 60 santigrat derecede dört ila 24 saat inkübe edin.

fabrication-square-pyramidal-microwells-for-tumor-spheroid

Research

JoVE Journal

Bioengineering

Fabrication of Square Pyramidal Microwells for Tumor Spheroid Fabrication

70 Görüntüleme.  Saint Louis University. Başlamak için, altı kuyulu kare parametal ana kalıbın bir kuyucuğuna iki gram veya yaklaşık bir mililitre negatif PDMS öncü çözeltisi dökün. Ana kalıbı PDMS ile kapladıktan sonra, çözeltinin gazını almak için plakayı vakumlu bir kurutucuya yerleştirin. Ardından, PDMS'yi iyileştirmek için plakayı 24 saat boyunca 60 santigrat derecede bir fırına koyun.PDMS sertleştiğinde ancak hala sıcak olduğunda, PDMS kalıbını ana kalıptan dikkatlice çıkarmak iç...

Video: Tümör Sferoid Üretimi için Kare Piramidal Mikrokuyuların İmalatı

Tumor Spheroid Fabrication and Encapsulation in Polyethylene Glycol Hydrogels for Studying Spheroid-Matrix Interactions

Three-dimensional (3D) encapsulation of spheroids is crucial to adequately replicate the tumor microenvironment for optimal cell growth. Here, we designed an in vitro 3D glioblastoma model for spheroid encapsulation to mimic the tumor extracellular microenvironment. First, we formed square pyramidal microwell molds using polydimethylsiloxane. These microwell molds were then used to fabricate tumor spheroids with tightly controlled sizes from 50-500 &#956;m. Once spheroids were formed, they were harvested and encapsulated in polyethylene glycol (PEG)-based hydrogels. PEG hydrogels are a versatile platform for spheroid encapsulation, as hydrogel properties such as stiffness, degradability, and cell adhesiveness can be tuned independently. Here, we used a representative soft (~8 kPa) hydrogel to encapsulate glioblastoma spheroids. Finally, a method to stain and image spheroids was developed to obtain high-quality images via confocal microscopy. Due to the dense spheroid core and relatively sparse periphery, imaging can be difficult, but using a clearing solution and confocal optical sectioning helps alleviate these imaging difficulties. In summary, we show a method to fabricate uniform spheroids, encapsulate them in PEG hydrogels and perform confocal microscopy on the encapsulated spheroids to study spheroid growth and various cell-matrix interactions.

Here, we present a protocol that enables fast, robust, and cheap fabrication of tumor spheroids followed by hydrogel encapsulation. It is widely applicable as it does not require specialized equipment. It would be particularly useful for exploring spheroid-matrix interactions and building in vitro tissue physiology or pathology models.

Three-dimensional (3D) encapsulation of spheroids is crucial to adequately replicate the tumor microenvironment for optimal cell growth.  Here, we ...

Biyomühendislik

To begin pour two grams or about one milliliter of negative PDMS precursor solution onto one well of a six well square parametal master mold. After covering the master mold with PDMS, place the plate in a vacuum desiccate to degas the solution. Next, place the plate in an oven at 60 degrees Celsius for 24 hours to cure the PDMS.Once PDMS cures but is still warm, use a spatula to carefully remove the PDMS mold from the master mold. Then with a biopsy punch, cut it into a 35 millimeter diameter slab. Place the properly cut PDMS mold in a Petri dish and cover it with the lid to continue curing it at room temperature for an additional 24 hours.To prepare the positive PDMS mold place a 35 millimeter slab of the negative PDMS mold in a 35 millimeter Petri dish with the textured micro wells facing up. Pour 2.5 grams or about 1.2 milliliters of positive PDMS precursor solution onto the negative mold in the Petri dish. Degas the precursor solution for 30 minutes before placing it into the oven at 60 degrees Celsius for three to four hours.After curing, remove the molds from the Petri dish. Immediately peel the positive mold from the negative mold. Use a 10 millimeter biopsy punch to cut the positive molds into slabs.Next, use tweezers to gently dip the flat side of each 10 millimeter positive mold into the pre-prepared PDMS glue precursor solution. Carefully place one mold per well in a well of a 48 well plate. Gently press each mold to glue it to the well bottom.Incubate the assembled plate at 60 degrees Celsius for four to 24 hours to cure the glue.

Multicellular Tumor Spheroid Formation, Harvest, and Encapsulation in Hydrogels

To begin, place the PDMS microwell molds, anti-adherence rinsing solution and necessary lab wear in a tissue culture hood. To wash the PDMS microwell molds, use a 1, 000 microliter pipette to add 300 microliters of anti-adherence rinsing solution to each well. Then centrifuge the plate, 1, 620 G for three minutes.Use a vacuum pump and a Pasteur pipette to aspirate the solution. Next, place 500 microliters of cell suspension at the desired concentration in the microwells and centrifuge the plate at 1, 620 G for three minutes. Place the plate in a humidified incubator to allow spheroid formation.To harvest the spheroids, using a 1, 000 microliter pipette, firmly add 500 microliters of complete medium into each well. Pipette the added medium up and down at each quadrant three to four times to dislodge the speroids. Then use the pipette to gently aspirate the medium containing the spheroids into a microcentrifuge tube.Transfer 50 microliters of the steroid suspension in a microcentrifuge tube. Then sequentially add 4-Arm PEG acrylate and PEG dithiol into it. Mix the resultant solution by pipetting it up and down about 10 times.To yield 100 microliters of a 10%weight by volume PEG hydrogel precursor solution, pipette 20 microliters of the gel precursor solution in between two parafilm-lined glass slides separated with one millimeter silicon spacers and incubate the slides with gel precursor solution to allow for gelation. Once hydrogel gelation is complete, using a spatula, gently peel the gels off the separated glass slides. Place one gel per well into a 24-well plate, ensuring the surface containing the spheroids faces up.Add 500 microliters of complete medium to each well to submerge the hydrogel completely. Place the multi-well plate in a humidified incubator to culture the cells. The described technique using microwell molds resulted in the formation of spheroids with spherical shapes and tightly-controlled polydispersity.For spheroids with 3, 300 cells per microwell, the average spheroid size was about 250 microns and circularity was greater than 0.8, considering a value of 1 as a perfect sphere. Spheroid diameters were dependent on the microwell size and the number of cells per microwell.

Hidrojellerde Çok Hücreli Tümör Sferoid Oluşumu, Hasadı ve Kapsüllenmesi

Immunofluorescence Fixation, Staining, and Clearing of Encapsulated Spheroids for Confocal Microscopy

To begin, aspirate the media from the wells where the hydrogel-encapsulated cells are cultured in the 24-well plate. Rinse the hydrogels by pipetting 500 microliters of PBS directly onto each well containing the hydrogels, and then gently aspirate the PBS. Using a 1, 000 microliter pipette, add 500 microliters of fixative solution per well to fix the spheroids in the 24-well plate.Allow the fixative to soak the gels for 30 minutes at room temperature, before pipetting out the fixative solution and discarding it in a designated waste container. Next, rinse the hydrogels with PBS three times as demonstrated previously. If not used immediately, store the hydrogels in 500 microliters of PBS per well at four degrees Celsius for up to one week.To stain in the hydrogel-encapsulated cells, first, prepare appropriately diluted primary antibodies for nestin and SOX2. After aspirating the PBS from the wells, add 50 microliters of the diluted antibodies to each well. Incubate the cells with the antibodies for 24 hours to stain them completely.Then using a 1, 000 microliter pipette, remove the staining solution and discard the waste appropriately. After rinsing the hydrogels three times, store them in PBS at four degrees Celsius for up to two weeks prior to imaging, or image immediately. To clear the stained spheroid for improving imaging transparency, first aspirate the PBS from each well.Then sequentially treat the spheroids with 500 microliters of 20%40%and 80%formamide per well for 90 minutes each. Finally incubate the hydrogels in 100%formamide for 24 hours prior to imaging. The spheroids were imaged at varying z-stack depths, allowing for the cell viability assessment at each location within the z-stack.A maximum projection utilizing the spheroid stack represented the highest point of light intensity within each location, simplified into one image. Representative images of stained spheroids revealed that the self-renewal transcription factor, SOX2, was co-localized with DAPI in the nucleus. On the contrary, stem cell marker nestin was present throughout the cells.There was no difference between the free floating spheroid without gel and the encapsulated spheroids, possibly due to the inertness of the PEG gel used. The representative images of optical sections at about 90 microns into cleared and uncleared spheroids revealed that when clearing was performed, the spheroid core could be imaged about 30 microns deeper compared to an uncleared spheroid.