Work in our lab is funded through the Natural Resources and Engineering Research Council of Canada (NSERC) Discovery Program, the Canadian Foundation for Innovation John R. Evans Leader&#39;s Fund, and Queen&#39;s University. KS and IS are supported by tandem Ontario Graduate Scholarships and NSERC Canada Graduate Scholarships for master&#39;s students (CGS-M).

1. Detection of ROS burst in Arabidopsis leaf discs following immune elicitation
<ol>
	<li>Plant growth and maintenance.
	<ol>
		<li>To synchronize germination, stratify Arabidopsis seeds by suspending approximately 50 seeds in 1 mL of sterile 0.1% agar [w/v] and store at 4 &#176;C (no light) for 3-4 days. 
		NOTE:&#160;Stratify a wild type background control (for example, Col-0) and genotypes with high and low immune outputs (for example,&#160;cpk28-1&#160;and&#160;bak1-5,&#160;respectively) to serve as internal controls.</li>
		<li>Sow seeds on soil and germinate under standard short-day conditions (22 &#176;C, 10 h light, 150 &#956;E/m2/s light intensity, and 65-70% relative humidity).</li>
		<li>After approximately 7 days, use forceps to transplant individual seedlings to new pots, separated by at least 4 cm to permit full rosette development. Transplant 6-12 seedlings per genotype and return to standard short-day conditions. Regularly water and fertilize plants (1 g/L of 20-20-20 fertilizer every 2 weeks).</li>
	</ol>
	</li>
	<li>Collect leaf discs in 96-well plates for overnight recovery.
	<ol>
		<li>At 4-5 weeks post-germination (Figure 1A), use a sharp 4 mm biopsy punch to remove one leaf disc per plant, avoiding the mid-vein and being careful to limit wounding (Figure 1B). Place leaf discs in an unused 96-well luminometer plate containing 100 &#956;L of ddH2O with the adaxial side facing upwards to prevent desiccation22 (Figure 1C). If assessing multiple elicitors, remove 1 leaf disc from the same leaf for each elicitor treatment. 
		NOTE: Sample leaves that are fully expanded, third to fifth from the top of the rosette, and approximately the same size and age to limit variability. If possible, cut leaf discs in half using a razor blade prior to overnight recovery, as this increases the surface area exposed to elicitor solution23.</li>
		<li>Recover overnight at room temperature to prevent the interference of ROS produced by wounding during leaf disc collection. Cover plates with a lid to prevent evaporation.</li>
	</ol>
	</li>
	<li>Perform the elicitor treatment and measure ROS production.
	<ol>
		<li>Program the plate reader prior to adding the reaction solution, as this will reduce the time between ROS burst initiation and the first measurements recorded. Use a commercial software that is appropriate for the plate reader. In our case (see Table of Contents), click Settings, and select the LUM96 Cartridge and the Kinetic Read Type. Click the Read Area category and drag to select a subset of wells or the entire plate to be read. Under the PMT and Optics tab, set the integration time to 1,000 ms. Under the Timing tab, set the Total Run Time to 40-60 min and the Interval to 2 min.</li>
		<li>Remove water from each well using a multi-channel pipette. 
		NOTE: Do not puncture leaf discs, as this may cause wounding stress and result in more variable ROS outputs.</li>
		<li>Prepare a reaction solution containing 100 &#956;M luminol, 10 &#956;g/mL HRP, and the desired concentration of elicitor (for example: elf18 at 1 nM, 10 nM, 100 nM, or 1,000 nM) in sterile ddH2O using 10 mL of solution for one 96-well plate. 
		NOTE:&#160;Dissolve lyophilized peptides in sterile H2O in low-binding tubes to make a 10 mM stock, flash-freeze in liquid N2, and store at -80 &#176;C. When ready to use, dilute stocks in sterile H2O to generate a 100 &#956;M working stock and store at -20 &#176;C.</li>
		<li>Use a multi-channel pipette to dispense 100 &#956;L of the reaction mixture to each well, adding the solution to all leaf discs of the same treatment at the same time22. Include a control reaction (no elicitor) for each genotype to assess basal ROS levels in the absence of elicitation. Immediately measure light emission for all wavelengths in the visible spectrum using a microplate reader. 
		NOTE: Prepare and apply the reaction solution under low light, as luminol and HRP are light-sensitive reagents. Keep reagents on ice or at -20&#176;C unless in use.</li>
		<li>Measure light emission with a 1,000 ms integration time in 2 min intervals over a 40-60 min period in a microplate reader in order to capture the dynamic oxidative burst (Figure 1D). 
		NOTE: Use a longer integration time to improve assay sensitivity11, while ensuring that all samples in a 96-well plate can be measured within one interval.</li>
	</ol>
	</li>
	<li>Data interpretation.
	<ol>
		<li>For each genotype, use a spreadsheet application to calculate the average photon count and standard error at each time point, and display ROS production as a function of time using a scatter plot. 
		<img alt="Equation 1" src="/files/ftp_upload/59437/59437eq1.jpg" /> 
		Where t = each time point</li>
		<li>Alternatively, sum the photon counts for each leaf disc and present the average of these values for each genotype using a bar graph with standard error bars or a box and whisker plot. 
		<img alt="Equation 2" src="/files/ftp_upload/59437/59437eq2.jpg" /></li>
	</ol>
	</li>
</ol>
2. Seedling Growth Inhibition Assay
<ol>
	<li>Sterilize seeds and sow on Murashige and Skoog (MS) plates.
	<ol>
		<li>Prepare sterile half-strength (0.5x) MS medium (2.16 g/L) containing 0.8% agar [w/v]. Pour media into plates (90 x 15 mm) in a laminar flow hood.</li>
		<li>Sterilize approximately 100 seeds in a microcentrifuge tube by washing with 1 mL of 70% ethanol for 2 min and remove by aspiration. Add 1 mL of 40% bleach and gently rock for 17 mins at room temperature. Remove bleach by aspiration and wash three times in 1 mL of sterile water for 5 min. Resuspend in 1 mL of sterile 0.1% agar. 
		NOTE: Alternatively, use a chlorine gas seed sterilization protocol24.</li>
		<li>Sow approximately 100 seeds per genotype on MS agar plates using a pipette and seal with micropore tape in a laminar flow hood. 
		NOTE: Avoid placing seeds in close proximity as this will make transplanting seedlings difficult later.</li>
		<li>Stratify seeds by placing plates at 4 &#176;C (no light) for 3-4 days to synchronize germination (Figure 2A).</li>
	</ol>
	</li>
	<li>Transplant seedlings into 48-well plates containing immune elicitor peptides.
	<ol>
		<li>After stratification, move plates to light under short day conditions (22 &#176;C, 10 h light, 150 &#956;E/m2/s light intensity, and 65-70% relative humidity) for 3-4 days to allow germination.</li>
		<li>In a laminar flow hood, prepare elicitor peptide dilutions (0 nM, 1 nM, 10 nM, 100 nM, and 1,000 nM) in sterile 0.5x MS liquid media containing 1% sucrose [w/v], using 25 mL of MS for each 48-well plate. Prepare plates by pipetting 500 &#181;L of MS liquid medium or MS medium containing peptides per well. If available, use a repeat pipettor for plate preparation to expedite the process. 
		NOTE: For each genotype, grow seedlings in MS without elicitor to account for any inherent differences in seedling growth.</li>
		<li>Using sterile forceps carefully transplant one seedling to each well of the same size and age, ensuring that there is no damage to the seedling or breakage to the root and that the root is submerged in media. For each genotype, transplant a minimum of 6-8 seedlings into each peptide dilution (Figure 2B). 
		NOTE: Transplant seedlings at 4 days post-germination, as short roots are easier to manipulate, and older seedlings may yield less optimal results.</li>
		<li>Seal plates with micropore tape and move back to light under standard short-day conditions (22 &#176;C, 10 h light, 150 &#956;E/m2/s light intensity, and 65-70% relative humidity). Allow seedlings to grow for 8-12 days.</li>
	</ol>
	</li>
	<li>Determine percent growth inhibition.
	<ol>
		<li>Carefully remove seedlings from 48-well plates and dry by dabbing on paper towel. Weigh seedlings on an analytical scale and record values. If available, use an analytical scale equipped with USB output to record fresh weight values on a spreadsheet. Before weighing seedlings, take a photo to visually display growth inhibition (Figure 2C).</li>
		<li>Determine percent growth inhibition of elicitor-treated seedlings compared to seedlings grown in MS only (Figure 2D) as follows: 
		<img alt="Equation 3" src="/files/ftp_upload/59437/59437eq3.jpg" /></li>
		<li>Plot data using a bar graph with standard error bars or using a box and whisker plot to better display inter-experimental variance.</li>
	</ol>
	</li>
</ol>

This paper describes two methods for assaying pattern-triggered immune responses in Arabidopsis, offering quantitative approaches to evaluating immune output without the use of specialized equipment. In combination, pattern-triggered ROS and SGI can be used to assess early and late responses to microbe perception, respectively.
The major limitation of the oxidative burst assay is variability. For reasons that are not completely understood, absolute RLUs often differ by an order of mag...

To perceive and defend against pathogens, plants have evolved membrane-bound pattern recognition receptors (PRRs) that detect conserved microbial molecules outside the cell known as microbe-associated molecular patterns (MAMPs)1. The binding of MAMPs to their cognate PRRs initiates protein kinase-mediated immune signaling resulting in broad-spectrum disease resistance2. One of the earliest responses following PRR activation is the phosphorylation and activation of integral plasma membrane RESPIRATORY BURST OXIDASE HOMOLOG (RBOH) proteins that catalyze the production of extracellular reactive oxygen species (ROS)3,4. ROS play an important role in establishing disease resistance, acting both as secondary messengers to propagate immune signaling as well as direct antimicrobial agents5. The first observation of an immune-elicited oxidative burst was described using potato tubers of cv. Rishiri following Phytophthora infestans inoculation6. ROS production has been evaluated in several plant species using leaf discs7, cell suspension cultures8, and protoplasts6. Described here is a simple method for assaying pattern-triggered ROS production in leaf discs of Arabidopsis thaliana (Arabidopsis).
As a response to MAMP perception, activated RBOH proteins catalyze the production of superoxide radicals (O2-), hydroxyl radicals (&#8226;OH), and singlet oxygen (1O2) that are converted into hydrogen peroxide (H2O2) in the extracellular space9. H2O2 can be quantified by luminol-based chemiluminescence in the presence of the oxidizing agent horseradish peroxidase (HRP)10. HRP oxidizes H2O2 generating a hydroxide ion (OH&#8722;) and oxygen gas (O2) which react with luminol to produce an unstable intermediate that releases a photon of light10. Photon emission can be quantified as relative light units (RLUs) using a microplate reader or imager capable of detecting luminescence, which have&#160;become standard pieces of equipment in most molecular laboratories. By measuring the light produced over a 40-60-minute interval, a transient oxidative burst can be detected as early as 2-5 minutes after the elicitor treatment, peaking at 10-20 minutes, and returning to basal levels after ~60 minutes11. The cumulative light produced over this time course can be used as a measure of immune strength corresponding to the activation of RBOH proteins12. Conveniently, this assay does not require specialized equipment or cumbersome sample preparation.
Peaking shortly after MAMP detection, the oxidative burst is considered an early immune response, along with MAPK activation and ethylene production5. Later immune responses include transcriptional reprogramming, stomatal closure, and callose deposition2,5. Prolonged exposure to MAMPs continually activates energetically-costly immune signaling resulting in the inhibition of plant growth, indicative of a trade-off between development and immunity13. Pattern-triggered seedling growth inhibition (SGI) is widely used to assess immune output in Arabidopsis and has been integral to the identification of several key components of immune signaling including PRRs14,15,16. Therefore, this paper additionally presents an assay for&#160;pattern-triggered SGI in Arabidopsis, whereby seedlings are grown in multi-well plates containing standard media or media supplemented with an immune elicitor for 8-12 days and then weighed using an analytical scale.
To demonstrate how ROS and SGI assays can be used to monitor PRR-mediated signaling, three genotypes that represent varying immune outputs were chosen: (1) the wild type Arabidopsis accession Columbia (Col-0), (2) the dominant-negative bak1-5 mutant in which the multi-functional PRR co-receptor BRASSINOSTEROID INSENSITIVE 1-ASSOCIATED KINASE 1&#160;(BAK1) is non-functional in immune signaling17,18, and (3) the recessive cpk28-1 mutant, which lacks the regulatory protein CALCIUM-DEPENDENT PROTEIN KINASE 28 (CPK28) and displays heightened immune-triggered responses19,20. ROS and SGI assays are presented in response to a synthetically-produced elf18 peptide epitope of bacterial Elongation Factor Tu (EF-Tu), recognized in Arabidopsis by the PRR EF-Tu RECEPTOR (EFR)15. These protocols can be used with other immune elicitors such as the bacterial motility protein flagellin14 or endogenous Plant Elicitor Proteins (AtPeps)16, however, it should be noted that plant responsiveness differs depending on the elicitor21. Together, ROS and SGI assays can be used for the quick and quantitative assessment&#160;of early and late PRR-mediated responses.

<table>
	<tbody>
		<tr>
			<td>20-20-20 Fertilizer</td>
			<td>Plant Prod</td>
			<td>10529</td>
			<td>Mix 1g/L in water and apply to plants every 2 weeks for optimal growth.</td>
		</tr>
		<tr>
			<td>4 mm Biopsy Punch</td>
			<td>Medical Mart</td>
			<td>232-33-34-P</td>
			<td>A cork borer set with a 0.125 cm^2 surface area can also be used.</td>
		</tr>
		<tr>
			<td>48-Well Sterile Plates with Lid</td>
			<td>Sigma-Aldrich</td>
			<td>CLS3548</td>
			<td></td>
		</tr>
		<tr>
			<td>Analytical Scale with Draft Sheid</td>
			<td>VWR</td>
			<td>VWR-225AC</td>
			<td>Any standard analytical scale can be used for growth inibition assays, however, a direct computer output is optimal.</td>
		</tr>
		<tr>
			<td>BioHit mLine Mechanical 12 Multichannel Pipette (30-300 uL)</td>
			<td>Sartorius</td>
			<td>725240</td>
			<td>Any multichannel pipette can be used, as can a single pipetter if necessary.</td>
		</tr>
		<tr>
			<td>elf18 (Ac-SKEKFERTKPHVNVGTIG)</td>
			<td>EZ Biolab</td>
			<td>cp7211</td>
			<td>Store 10 mM stock peptide at -80C in low protein binding tubes. When thawed, store 100 uM working stock at -20C.</td>
		</tr>
		<tr>
			<td>Forceps</td>
			<td>Fisher Scientific</td>
			<td>22-327379</td>
			<td></td>
		</tr>
		<tr>
			<td>Horseradish Peroxidase</td>
			<td>Sigma-Aldrich</td>
			<td>P6782</td>
			<td>Dissolve in pure water. Store at -20C and away from light.</td>
		</tr>
		<tr>
			<td>Luminol</td>
			<td>Sigma-Aldrich</td>
			<td>A8511</td>
			<td>Dissolve in DMSO. Store at -20C and away from light.</td>
		</tr>
		<tr>
			<td>Murisage and Skoog Basal Salts</td>
			<td>Cedarlane Labs</td>
			<td>MSP09-100LT</td>
			<td>Store at 4C.</td>
		</tr>
		<tr>
			<td>Soil</td>
			<td>SunGrow Horticulture</td>
			<td>Sunshine Mix #1</td>
			<td>Other soil types can also be used to grow Arabidopsis. Mix with water when filling pots.</td>
		</tr>
		<tr>
			<td>SpectraMax Paradigm Multi Mode Microplate Reader with LUM Module</td>
			<td>Molecular Devices</td>
			<td>Must request a quote</td>
			<td>Any plate reader capable of detecting luminescence can be used for these assays.</td>
		</tr>
		<tr>
			<td>Sucrose</td>
			<td>Sigma-Aldrich</td>
			<td>S0389-1KG</td>
			<td>Store at room temperature.</td>
		</tr>
		<tr>
			<td>White Polystyrene 96-Well Plates</td>
			<td>Fisher Scientific</td>
			<td>07-200-589</td>
			<td></td>
		</tr>
	</tbody>
</table>

pattern-triggered oxidative burst and seedling growth inhibition assays in arabidopsis thaliana

Plants have evolved a robust immune system to perceive pathogens and protect against disease. This paper describes two assays that can be used to measure the strength of immune activation in Arabidopsis thaliana following treatment with elicitor molecules. Presented first is a method for capturing the rapidly-induced and dynamic oxidative burst, which can be monitored using a luminol-based assay. Presented second is a method describing how to measure immune-induced inhibition of seedling growth. These protocols are fast and reliable, do not require specialized training or equipment, and are widely used to understand the genetic basis of plant immunity.

Mutant cpk28-119,25 and bak1-517,18 plants were used to demonstrate expected outcomes for genotypes with high and low immune responses, respectively, in oxidative burst and SGI assays relative to a wild-type background control (Col-0). To assess dose-dependent effects, a 10-fold peptide dilution series (1-1,000 nM) of elf18 was used. As expected, cpk2...

Watch this Scientific Journal Video about Pattern-Triggered Oxidative Burst and Seedling Growth Inhibition Assays in Arabidopsis thaliana at JoVE.com

Pattern-Triggered Oxidative Burst and Seedling Growth Inhibition Assays in Arabidopsis thaliana

Arabidopsis thaliana 'Da desen tetiklenen oksidatif patlama ve fide büyüme Inhibisyonu asder

This paper describes two methods for quantifying defense responses in Arabidopsis thaliana following exposure to immune elicitors: the transient oxidative burst, and the inhibition of seedling growth.

Pattern-Triggered Oxidative Burst and Seedling Growth Inhibition Assays in Arabidopsis thaliana

Plants have evolved a robust immune system to perceive pathogens and protect against disease. This paper describes two assays that can be used to measure ...

pattern-triggered-oxidative-burst-seedling-growth-inhibition-assays

Research

JoVE Journal

Immunology and Infection

13.0K Görüntüleme.  Queen's University. Bu tahliller değerlendirmek ve farklı bitki genotiplerinin bağışıklık çıktıları karşılaştırmak için kullanılabilir. Bu tekniklerin en büyük avantajı, hızlı, güvenilir ve ortak laboratuvar ekipmanları kullanmak olmasıdır. Büyüme inhibisyonu töziçin, aynı boyutta ve yaştaki fideler, değişimi sınırlamak için tartılmadan önce nakledilmeli ve tamamen kurutulmalıdır.Çimlenmeden dört ila beş hafta sonra, Arabidopsis bitkibaşına göre bir yaprak di...

Video: Pattern-Triggered Oxidative Burst and Seedling Growth Inhibition Assays in Arabidopsis thaliana

Growth of Mycobacterium tuberculosis Biofilms

Mycobacterium tuberculosis, the etiologic agent of human tuberculosis, has an extraordinary ability to survive against environmental stresses including antibiotics. Although stress tolerance of M. tuberculosis is one of the likely contributors to the 6-month long chemotherapy of tuberculosis 1, the molecular mechanisms underlying this characteristic phenotype of the pathogen remain unclear. Many microbial species have evolved to survive in stressful environments by self-assembling in highly organized, surface attached, and matrix encapsulated structures called biofilms 2-4. Growth in communities appears to be a preferred survival strategy of microbes, and is achieved through genetic components that regulate surface attachment, intercellular communications, and synthesis of extracellular polymeric substances (EPS) 5,6. The tolerance to environmental stress is likely facilitated by EPS, and perhaps by the physiological adaptation of individual bacilli to heterogeneous microenvironments within the complex architecture of biofilms 7.
In a series of recent papers we established that M. tuberculosis and Mycobacterium smegmatis have a strong propensity to grow in organized multicellular structures, called biofilms, which can tolerate more than 50 times the minimal inhibitory concentrations of the anti-tuberculosis drugs isoniazid and rifampicin 8-10. M. tuberculosis, however, intriguingly requires specific conditions to form mature biofilms, in particular 9:1 ratio of headspace: media as well as limited exchange of air with the atmosphere 9. Requirements of specialized environmental conditions could possibly be linked to the fact that M. tuberculosis is an obligate human pathogen and thus has adapted to tissue environments. In this publication we demonstrate methods for culturing M. tuberculosis biofilms in a bottle and a 12-well plate format, which is convenient for bacteriological as well as genetic studies. We have described the protocol for an attenuated strain of M. tuberculosis, mc27000, with deletion in the two loci, panCD and RD1, that are critical for in vivo growth of the pathogen 9. This strain can be safely used in a BSL-2 containment for understanding the basic biology of the tuberculosis pathogen thus avoiding the requirement of an expensive BSL-3 facility. The method can be extended, with appropriate modification in media, to grow biofilm of other culturable mycobacterial species.
Overall, a uniform protocol of culturing mycobacterial biofilms will help the investigators interested in studying the basic resilient characteristics of mycobacteria. In addition, a clear and concise method of growing mycobacterial biofilms will also help the clinical and pharmaceutical investigators to test the efficacy of a potential drug.

Growth of Mycobacterium tuberculosis Biofilms

Mycobacterium tuberculosis forms drug tolerant biofilms when cultured in certain conditions. Here we describe methods for culturing M. tuberculosis biofilms and determining the frequency of drug tolerant persisters. These protocols will be useful for further studies into the mechanisms of drug tolerance in M. tuberculosis.

Büyüme Mycobacterium tuberculosis Biyofilmler

Mycobacterium tuberculosis, the etiologic agent of human tuberculosis, has an extraordinary ability to survive against environmental stresses including ...

İmmünoloji ve Enfeksiyon

Quantification of the Respiratory Burst Response as an Indicator of Innate Immune Health in Zebrafish

The phagocyte respiratory burst is part of the innate immune response to pathogen infection and involves the production of reactive oxygen species (ROS). ROS are toxic and function to kill phagocytized microorganisms. In vivo quantification of phagocyte-derived ROS provides information regarding an organism's ability to mount a robust innate immune response. Here we describe a protocol to quantify and compare ROS in whole zebrafish embryos upon chemical induction of the phagocyte respiratory burst. This method makes use of a non-fluorescent compound that becomes fluorescent upon oxidation by ROS. Individual zebrafish embryos are pipetted into the wells of a microplate and incubated in this fluorogenic substrate with or without a chemical inducer of the respiratory burst. Fluorescence in each well is quantified at desired time points using a microplate reader. Fluorescence readings are adjusted to eliminate background fluorescence and then compared using an unpaired t-test. This method allows for comparison of the respiratory burst potential of zebrafish embryos at different developmental stages and in response to experimental manipulations such as protein knockdown, overexpression, or treatment with pharmacological agents. This method can also be used to monitor the respiratory burst response in whole dissected kidneys or cell preparations from kidneys of adult zebrafish and some other fish species. We believe that the relative simplicity and adaptability of this protocol will complement existing protocols and will be of interest to researchers who seek to better understand the innate immune response.

The innate immune response protects organisms against pathogen infection. A critical component of the innate immune response, the phagocyte respiratory burst, generates reactive oxygen species that kill invading microorganisms. We describe a respiratory burst assay that quantifies reactive oxygen species produced when the innate immune response is chemically induced.

Zebra balığı Doğuştan Bağışıklık Sağlık Bir Göstergesi Olarak Solunum Burst Tepki Kantitasyonu

The phagocyte respiratory burst is part of the innate immune response to  pathogen infection and involves the production of reactive oxygen species (ROS). ...

Using Fluorescent Proteins to Visualize and Quantitate Chlamydia Vacuole Growth Dynamics in Living Cells

The obligate intracellular bacterium Chlamydia elicits a great burden on global public health. C.&#160;trachomatis is the leading bacterial cause of sexually transmitted infection and also the primary cause of preventable blindness in the world. An essential determinant for successful infection of host cells by Chlamydia is the bacterium's ability to manipulate host cell signaling from within a novel, vacuolar compartment called the inclusion. From within the inclusion, Chlamydia acquire nutrients required for their 2-3 day developmental growth, and they additionally secrete a panel of effector proteins onto the cytosolic face of the vacuole membrane and into the host cytosol. Gaps in our understanding of Chlamydia biology, however, present significant challenges for visualizing and analyzing this intracellular compartment. Recently, a reverse-imaging strategy for visualizing the inclusion using GFP expressing host cells was described. This approach rationally exploits the intrinsic impermeability of the inclusion membrane to large molecules such as GFP. In this work, we describe how GFP- or mCherry-expressing host cells are generated for subsequent visualization of chlamydial inclusions. Furthermore, this method is shown to effectively substitute for costly antibody-based enumeration methods, can be used in tandem with other fluorescent labels, such as GFP-expressing Chlamydia, and can be exploited to derive key quantitative data about inclusion membrane growth from a range of Chlamydia species and strains.

Using Fluorescent Proteins to Visualize and Quantitate Chlamydia Vacuole Growth Dynamics in Living Cells

A live cell fluorescent protein based method for illuminating cellular vacuoles (inclusions) containing Chlamydia is described. This strategy enables rapid, automated determination of Chlamydia infectivity in samples and can be used to quantitatively investigate inclusion growth dynamics.

Görselleştirme ve Miktarının Belirlenmesi için floresan proteinleri kullanarak<em&gt; Chlamydia</em&gt; Vakuol Büyüme Dinamikleri Yaşayan Hücrelerde

The obligate intracellular bacterium Chlamydia elicits a great burden on global public health. C.&#160;trachomatis is the leading bacterial cause of ...

Bioenergetics and the Oxidative Burst: Protocols for the Isolation and Evaluation of Human Leukocytes and Platelets

Mitochondrial dysfunction is known to play a significant role in a number of pathological conditions such as atherosclerosis, diabetes, septic shock, and neurodegenerative diseases but assessing changes in bioenergetic function in patients is challenging.&#160;Although diseases such as diabetes or atherosclerosis present clinically with specific organ impairment, the systemic components of the pathology, such as hyperglycemia or inflammation, can alter bioenergetic function in circulating leukocytes or platelets. This concept has been recognized for some time but its widespread application has been constrained by the large number of primary cells needed for bioenergetic analysis.&#160;This technical limitation has been overcome by combining the specificity of the magnetic bead isolation techniques, cell adhesion techniques, which allow cells to be attached without activation to microplates, and the sensitivity of new technologies designed for high throughput microplate respirometry.&#160;An example of this equipment is the extracellular flux analyzer. Such instrumentation typically uses oxygen and pH sensitive probes to measure rates of change in these parameters in adherent cells, which can then be related to metabolism. Here we detail the methods for the isolation and plating of monocytes, lymphocytes, neutrophils and platelets, without activation, from human blood and the analysis of mitochondrial bioenergetic function in these cells. In addition, we demonstrate how the oxidative burst in monocytes and neutrophils can also be measured in the same samples. Since these methods use only 8-20 ml human blood they have potential for monitoring reactive oxygen species generation and bioenergetics in a clinical setting.

Blood leukocytes and platelets can be used as a marker of overall bioenergetic health of an individual and so have the potential to monitor pathological processes and the impact of treatments. Here&#160;we describe a method to isolate and measure mitochondrial function and the oxidative burst in these cells.

İnsan lökosit ve trombosit İzolasyonu ve Değerlendirme Protokolleri: Biyoenerji ve Oksidatif Burst

Mitochondrial dysfunction is known to play a significant role in a number of pathological conditions such as atherosclerosis, diabetes, septic shock, and ...

Methods to Inhibit Bacterial Pyomelanin Production and Determine the Corresponding Increase in Sensitivity to Oxidative Stress

Pyomelanin is an extracellular red-brown pigment produced by several bacterial and fungal species. This pigment is derived from the tyrosine catabolism pathway and contributes to increased oxidative stress resistance. Pyomelanin production in Pseudomonas aeruginosa is reduced in a dose dependent manner through treatment with 2-[2-nitro-4-(trifluoromethyl)benzoyl]-1,3-cyclohexanedione (NTBC). We describe a titration method using multiple concentrations of NTBC to determine the concentration of drug that will reduce or abolish pyomelanin production in bacteria. The titration method has an easily quantifiable outcome, a visible reduction in pigment production with increasing drug concentrations. We also describe a microtiter plate method to assay antibiotic minimum inhibitory concentration (MIC) in bacteria. This method uses a minimum of resources and can easily be scaled up to test multiple antibiotics in one microtiter plate for one strain of bacteria. The MIC assay can be adapted to test the affects of non-antibiotic compounds on bacterial growth at specific concentrations. Finally, we describe a method for testing bacterial sensitivity to oxidative stress by incorporating H2O2 into agar plates and spotting multiple dilutions of bacteria onto the plates. Sensitivity to oxidative stress is indicated by reductions in colony number and size for the different dilutions on plates containing H2O2 compared to a no H2O2 control. The oxidative stress spot plate assay uses a minimum of resources and low concentrations of H2O2. Importantly, it also has good reproducibility. This spot plate assay could be adapted to test bacterial sensitivity to various compounds by incorporating the compounds in agar plates and characterizing the resulting bacterial growth.

Bacterial pyomelanin production results in increased resistance to oxidative stress and virulence. We report on techniques that can be used to determine inhibition of pyomelanin production and assay the resulting increase in sensitivity to oxidative stress in bacteria, as well as determine antibiotic minimum inhibitory concentration (MIC).

Yöntemler Bakteriyel Pyomelanin Üretim ønhibe ve Oksidatif Stres Duyarlılık içinde tekabül eden artış belirleme

Pyomelanin is an extracellular red-brown pigment produced by several bacterial and fungal species. This pigment is derived from the tyrosine catabolism ...

Bacterial Leaf Infiltration Assay for Fine Characterization of Plant Defense Responses using the Arabidopsis thaliana-Pseudomonas syringae Pathosystem

In the absence of specialized mobile immune cells, plants utilize their localized programmed cell death and Systemic Acquired Resistance to defend themselves against pathogen attack. The contribution of a specific Arabidopsis gene to the overall plant immune response can be specifically and quantitatively assessed by assaying the pathogen growth within the infected tissue. For over three decades, the hemibiotrophic bacterium Pseudomonas syringae pv. maculicola ES4326 (Psm ES4326) has been widely applied as the model pathogen to investigate the molecular mechanisms underlying the Arabidopsis immune response. To deliver pathogens into the leaf tissue, multiple inoculation methods have been established, e.g., syringe infiltration, dip inoculation, spray, vacuum infiltration, and flood inoculation. The following protocol describes an optimized syringe infiltration method to deliver virulent Psm ES4326 into leaves of adult soil-grown Arabidopsis plants and accurately screen for enhanced disease susceptibility (EDS) towards this pathogen. In addition, this protocol can be supplemented with multiple pre-treatments to further dissect specific immune defects within different layers of plant defense, including Salicylic Acid (SA)-Triggered Immunity (STI) and MAMP-Triggered Immunity (MTI).

Bacterial Leaf Infiltration Assay for Fine Characterization of Plant Defense Responses using the Arabidopsis thaliana-Pseudomonas syringae Pathosystem

Quantification of pathogen growth is a powerful tool to characterize various Arabidopsis thaliana (hereafter: Arabidopsis) immune responses. The method described here presents an optimized syringe infiltration assay to quantify the Pseudomonas syringae pv. maculicola ES4326 growth in adult Arabidopsis leaves.

Kullanarak Bitki Savunma Yanıtları ince Karakterizasyonu için Bakteriyel Yaprak Sızma Deneyi<em&gt; Arabidopsis thaliana-Pseudomonas syringae</em&gt; Pathosystem

In the absence of specialized mobile immune cells, plants utilize their localized programmed cell death and Systemic Acquired Resistance to defend ...

Measuring Granulocyte and Monocyte Phagocytosis and Oxidative Burst Activity in Human Blood

The granulocyte and monocyte phagocytosis and oxidative burst (OB) activity assay can be used to study the innate immune system. This manuscript provides the necessary methodology to add this assay to an exercise immunology arsenal. The first step in this assay is to prepare two aliquots ("H" and "F") of whole blood (heparin). Then, dihydroethidium is added to the H aliquot, and both aliquots are incubated in a warm water bath followed by a cold water bath. Next, Staphylococcus aureus (S. aureus) is added to the H aliquot and fluorescein isothiocyanate-labeled S. aureus is added to the F aliquot (bacteria:phagocyte = 8:1), and both aliquots are incubated in a warm water bath followed by a cold water bath. Then, trypan blue is added to each aliquot to quench extracellular fluorescence, and the cells are washed with phosphate-buffered saline. Next, the red blood cells are lysed, and the white blood cells are fixed. Finally, a flow cytometer and appropriate analysis software are used to measure granulocyte and monocyte phagocytosis and OB activity. This assay has been used for over 20 years. After heavy and prolonged exertion, athletes experience a significant but transient increase in phagocytosis and an extended decrease in OB activity. The post-exercise increase in phagocytosis is correlated with inflammation. In contrast to normal weight individuals, granulocyte and monocyte phagocytosis is chronically elevated in overweight and obese participants, and is modestly correlated with C-reactive protein. In summary, this flow cytometry-based assay measures the phagocytosis and OB activity of phagocytes and can be used as an additional measure of exercise- and obesity-induced inflammation.

The purpose of this manuscript is to present a method for measuring monocyte and granulocyte phagocytosis and oxidative burst activity in human blood samples.

İnsan Kanı Ölçüm Granülosit ve Monosit Fagositoz ve Oksidatif Burst Etkinlik

The granulocyte and monocyte phagocytosis and oxidative burst (OB) activity assay can be used to study the innate immune system. This manuscript provides ...

Assays for the Specific Growth Rate and Cell-binding Ability of Rotavirus

Rotavirus is the main etiological factor for infantile diarrhea. It is a double-stranded (ds) RNA virus and forms a genetically diverse population, known as quasispecies, owing to their high mutation rate. Here, we describe how to measure the specific growth rate and the cell-binding ability of rotavirus as its phenotypes. Rotavirus is treated with trypsin to recognize the cell receptor and then inoculated into MA104 cell culture. The supernatant, including viral progenies, is collected intermittently. The plaque assay is used to confirm the virus titer (plaque-forming unit: pfu) of each collected supernatant. The specific growth rate is estimated by fitting time-course data of pfu/mL to the modified Gompertz model. In the assay of cell-binding, MA104 cells in a 24-well plate are infected with rotavirus and incubated for 90 min at 4 &#176;C for rotavirus adsorption to cell receptors. A low temperature restrains rotavirus from invading the host cell. After washing to remove unbound virions, RNA is extracted from virions attached to cell receptors followed by cDNA synthesis and reverse-transcription quantitative PCR (RT-qPCR). These protocols can be applied for investigating the phenotypic differences among viral strains.

Here we present two protocols, one for measuring the specific growth rate and the other for the cell-binding ability of rotavirus using the plaque assay and RT-qPCR. These protocols are available for confirming the differences in phenotypes between rotavirus strains.

Belirli büyüme oranı ve hücre-bağlama yeteneği Rotavirüs deneyleri

Rotavirus is the main etiological factor for infantile diarrhea. It is a double-stranded (ds) RNA virus and forms a genetically diverse population, known ...

Monitoring Bacterial Colonization and Maintenance on Arabidopsis thaliana Roots in a Floating Hydroponic System

Bacteria form complex rhizosphere microbiomes shaped by interacting microbes, larger organisms, and the abiotic environment. Under laboratory conditions, rhizosphere colonization by plant growth-promoting bacteria (PGPB) can increase the health or the development of host plants relative to uncolonized plants. However, in field settings, bacterial treatments with PGPB often do not provide substantial benefits to crops. One explanation is that this may be due to loss of the PGPB during interactions with endogenous soil microbes over the lifespan of the plant. This possibility has been difficult to confirm, since most studies focus on the initial colonization rather than maintenance of PGPB within rhizosphere communities. It is hypothesized here that the assembly, coexistence, and maintenance of bacterial communities are shaped by deterministic features of the rhizosphere microenvironment, and that these interactions may impact PGPB survival in native settings. To study these behaviors, a hydroponic plant-growth assay is optimized using Arabidopsis thaliana to quantify and visualize the spatial distribution of bacteria during initial colonization of plant roots and after transfer to different growth environments. This system&#8217;s reproducibility and utility are then validated with the well-studied PGPB Pseudomonas simiae. To investigate how the presence of multiple bacterial species may affect colonization and maintenance dynamics on the plant root, a model community from three bacterial strains (an Arthrobacter, Curtobacterium, and Microbacterium species) originally isolated from the A. thaliana rhizosphere is constructed. It is shown that the presence of these diverse bacterial species can be measured using this hydroponic plant-maintanence assay, which provides an alternative to sequencing-based bacterial community studies. Future studies using this system may improve the understanding of bacterial behavior in multispecies plant microbiomes over time and in changing environmental conditions.

Monitoring Bacterial Colonization and Maintenance on Arabidopsis thaliana Roots in a Floating Hydroponic System

Here we describe a hydroponic plant growth assay to quantify species presence and visualize the spatial distribution of bacteria during initial colonization of plant roots and after their transfer into different growth environments.

Yüzen hidroponik sistemde Arabidopsis thaliana kökleri üzerinde bakteriyel kolonizasyon ve bakım izleme

Bacteria form complex rhizosphere microbiomes shaped by interacting microbes, larger organisms, and the abiotic environment. Under laboratory conditions, ...

Determination of Chemical Inhibitor Efficiency against Intracellular Toxoplasma Gondii Growth Using a Luciferase-Based Growth Assay

Toxoplasma gondii is a protozoan pathogen that widely affects the human population. The current antibiotics used for treating clinical toxoplasmosis are limited. In addition, they exhibit adverse side effects in certain groups of people. Therefore, discovery of novel therapeutics for clinical toxoplasmosis is imperative. The first step of novel antibiotic development is to identify chemical compounds showing high efficacy in inhibition of parasite growth using a high throughput screening strategy. As an obligate intracellular pathogen, Toxoplasma can only replicate within host cells, which prohibits the use of optical absorbance measurements as a quick indicator of growth. Presented here is a detailed protocol for a luciferase-based growth assay. As an example, this method is used to calculate the doubling time of wild-type Toxoplasma parasites and measure the efficacy of morpholinurea-leucyl-homophenyl-vinyl sulfone phenyl (LHVS, a cysteine protease-targeting compound) regarding inhibition of parasite intracellular growth. Also described, is a CRISPR-Cas9-based gene deletion protocol in Toxoplasma using 50 bp homologous regions for homology-dependent recombination (HDR). By quantifying the inhibition efficacies of LHVS in wild-type and TgCPL (Toxoplasma cathepsin L-like protease)-deficient parasites, it is shown that LHVS inhibits wild-type parasite growth more efficiently than &#916;cpl growth, suggesting that TgCPL is a target that LHVS binds to in Toxoplasma. The high sensitivity and easy operation of this luciferase-based growth assay make it suitable for monitoring Toxoplasma proliferation and evaluating drug efficacy in a high throughput manner.

Determination of Chemical Inhibitor Efficiency against Intracellular Toxoplasma Gondii Growth Using a Luciferase-Based Growth Assay

Presented here is a protocol to evaluate the inhibition efficacy of chemical compounds against in vitro intracellular growth of Toxoplasma gondii using a luciferase-based growth assay. The technique is used to confirm inhibition specificity by genetic deletion of the corresponding target gene. The inhibition of LHVS against TgCPL protease is evaluated as an example.

Luciferase Tabanlı Büyüme Testini Kullanarak Hücre İçi Toksoplazma Gondii Büyümesine Karşı Kimyasal Inhibitör Verimliliğin Belirlenmesi

Toxoplasma gondii is a protozoan pathogen that widely affects the human population. The current antibiotics used for treating clinical toxoplasmosis are ...