<p class="jove_content">For the present study, the animal experiments were approved by UCSF Institutional Animal Care and Use Committee and were conducted in accordance with the NIH Guide for the Care and Use of Laboratory animals. Adult, 8-12-week-old C57BL/6 male and female mice (in-house bred) were used here.</p>
<p class="jove_title"><strong>1. DRG sample preparation</strong></p>
<ol>
	<li>Anesthetize the mice with 2.5% Avertin (see <strong>Table of Materials</strong>). Ensure adequate anesthesia by the lack of response to painful stimulation. Perfuse the animals transcardially with 1x phosphate-buffered saline (PBS) followed by 4% formaldehyde, as previously described<sup class="xref">14</sup><sup>,</sup><sup class="xref">15</sup><sup>,</sup><sup class="xref">16</sup>.</li>
	<li>Dissect DRG tissue from the spinal cord, as previously described<sup class="xref">14</sup><sup>,</sup><sup class="xref">15</sup><sup>,</sup><sup class="xref">16</sup>.</li>
	<li>Post-fix the dissected DRGs in 4% formaldehyde for 3 h at room temperature.</li>
	<li>Put the DRGs in 30% sucrose in PBS at 4 &#176;C overnight.</li>
	<li>Preparing the base optimal cutting temperature (OCT)
	<ol>
		<li>Add the OCT compound (see <strong>Table of Materials</strong>) to cover the top surface of the aluminum block and freeze at -20 &#176;C for 5-10 min (<strong class="xfig">Figure 1A</strong>).</li>
		<li>Cut off the top of the OCT using the cryostat (see <strong>Table of Materials</strong>) at 30 &#181;m thickness until its surface is flat as the base OCT (<strong class="xfig">Figure 1B</strong>).</li>
		<li>Make a mark at the bottom (six o&#39;clock position) of the base OCT to mark its orientation, before taking the aluminum block off the cryostat (<strong class="xfig">Figure 1C</strong>).</li>
		<li>In the following steps, keep the mark at the six o&#39;clock position to maintain the same orientation, which can lead to obtaining more sections of the DRG sample.<br />
		NOTE: If the orientation is lost and the DRG sample is cut at a different angle, the DRG sample cannot be cut completely from top to bottom, which will leave some samples left out on the base OCT and wasted, as the base OCT will be encountered while trying to cut the DRG sample (<strong class="xfig">Figure 1C</strong>).</li>
	</ol>
	</li>
	<li>Performing OCT embedment of DRGs
	<ol>
		<li>Dry the DRG tissue before putting it on the OCT.
		<ol>
			<li>Before adding the DRG onto the block, ensure to remove the 30% sucrose/PBS solution around the sample.</li>
			<li>Dry the DRG sample by placing it on a dry Petri dish (<strong class="xfig">Figure 2A</strong>) and moving it from one location to another two or three times with dry tweezers (<strong class="xfig">Figure 2B</strong>).</li>
			<li>Dry the tweezers with lint-free tissue before moving another DRG sample (<strong class="xfig">Figure 2C</strong>).</li>
		</ol>
		</li>
		<li>Put the dry DRG onto the base OCT.
		<ol>
			<li>With dry tweezers, place the dry DRG onto the base OCT at the 12 o&#39;clock position (<strong class="xfig">Figure 1D</strong>).</li>
			<li>Keep at least 5 mm between the upper edge of the DRG and the upper edge of the base OCT.</li>
			<li>Put the dorsal part of the DRG at the 12 o&#39;clock position and the ventral part at the six o&#39;clock position (<strong class="xfig">Figure 1D</strong>).</li>
		</ol>
		</li>
		<li>Embed the DRG tissue with OCT.
		<ol>
			<li>Add more OCT to cover the entire DRG sample in a round or oval shape, with the DRG in the center (<strong class="xfig">Figure 1E</strong>).</li>
			<li>Ensure the upper edge of the OCT covers the DRG at the upper edge of the base OCT (<strong class="xfig">Figure 1F</strong>), as this makes it easier to transfer the section onto the glass slide (<strong class="xfig">Figure 3A</strong>).<br />
			NOTE: If the cover OCT is in the middle of the base OCT, the upper edge of the base OCT will block the glass slide to collect the section (<strong class="xfig">Figure 3B</strong>).</li>
			<li>Freeze the cover OCT and DRG sample at -20 &#176;C for another 5 min (<strong class="xfig">Figure 1G</strong>). Do not trim the OCT around the DRG sample.</li>
			<li>Cut off the top of the cover OCT at a 30 &#181;m thickness until the DRG is visible.</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
<p class="jove_title"><strong>2. Cryosectioning of the DRG</strong></p>
<ol>
	<li>Change the cryostat section thickness to 12 &#181;m to cut DRG sections onto the slide (<strong class="xfig">Figure 1H</strong>).</li>
	<li>Hold the OCT section at the bottom with a small paintbrush cooled to -20 &#176;C.<br />
	NOTE: It is important not to cut the whole section completely, but to leave 1-3 mm uncut (<strong class="xfig">Figure 1I</strong>).</li>
	<li>Use the end of a room-temperature tweezer to gently touch the bottom (six o&#39;clock position) of the section so that it sticks to the platform surface (<strong class="xfig">Figure 1J</strong>). This prevents the section from curving back in a roll, which makes it difficult to collect the section on the slide.<br />
	NOTE: When the bottom of the section sticks to the platform surface, and the top of the section still connects with the cover OCT, the section is in a flat shape (<strong class="xfig">Figure 1K</strong>), making it much easier to collect the section on the slide.</li>
	<li>Take a charged glass slide (see <strong>Table of Materials</strong>) and slowly place the slide over the section. As soon as the section starts to stick to the slide, gently pull the slide backward (<strong class="xfig">Figure 1L</strong>).</li>
	<li>Follow the same process to get more DRG sections onto the slide without overlapping the sections (<strong class="xfig">Figure 1M</strong>). Ensure that a new DRG section is not placed over the OCT of another DRG section (<strong class="xfig">Figure 4</strong>), as such a section cannot stay well on the slide and can be washed away during the immunochemistry staining process.</li>
</ol>
<p class="jove_title"><strong>3. Nissl staining of the DRG section on the glass slide</strong></p>
<ol>
	<li>Wash the sections for 10 min in PBS plus 0.1% Triton X-10. Then, wash the sections twice with PBS.</li>
	<li>Apply a 1:300 Nissl stain (see <strong>Table of Materials</strong>) to the slide and incubate for 20 min at room temperature.</li>
	<li>Wash the section with PBS plus 0.1% Triton X-100. Then, wash the sections twice with PBS for 5 min, and then for 2 h at room temperature.</li>
	<li>Apply 4&#8242;,6-diamidino-2-phenylindole (DAPI) fluoromount-G (see <strong>Table of Materials</strong>) to cover the sections with a coverslip.</li>
</ol>

Mouse Dorsal Root Ganglion Cryosectioning

<ol>
	<li>Guan, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Injured+sensory+neuron-derived+CSF1+induces+microglial+proliferation+and+DAP12-dependent+pain.">Injured sensory neuron-derived CSF1 induces microglial proliferation and DAP12-dependent pain.</a> <em style='font-style: italic'>Nature Neuroscience</em>. <b>19</b> (1), 94-101 (2016).</li><li>Yu, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dorsal+root+ganglion+macrophages+contribute+to+both+the+initiation+and+persistence+of+neuropathic+pain.">Dorsal root ganglion macrophages contribute to both the initiation and persistence of neuropathic pain.</a> <em style='font-style: italic'>Nature Communications</em>. <b>11</b> (1), 264 (2020).</li><li>Costa, F. A. L., Moreira Neto, F. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Satellite+glial+cells+in+sensory+ganglia:+its+role+in+pain.">Satellite glial cells in sensory ganglia: its role in pain.</a> <em style='font-style: italic'>Brazilian Journal of Anesthesiology</em>. <b>65</b> (1), 73-81 (2015).</li><li>Noguri, T., Hatakeyama, D., Kitahashi, T., Oka, K., Ito, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Profile+of+dorsal+root+ganglion+neurons:+study+of+oxytocin+expression.">Profile of dorsal root ganglion neurons: study of oxytocin expression.</a> <em style='font-style: italic'>Molecular Brain</em>. <b>15</b> (1), 44 (2022).</li><li>Su, P. P., Zhang, L., He, L., Zhao, N., Guan, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+neuro-immune+interactions+in+chronic+pain:+implications+for+clinical+practice.">The role of neuro-immune interactions in chronic pain: implications for clinical practice.</a> <em style='font-style: italic'>Journal of Pain Research</em>. <b>15</b>, 2223-2248 (2022).</li><li>Esposito, M. F., Malayil, R., Hanes, M., Deer, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Unique+characteristics+of+the+dorsal+root+ganglion+as+a+target+for+neuromodulation.">Unique characteristics of the dorsal root ganglion as a target for neuromodulation.</a> <em style='font-style: italic'>Pain Medicine</em>. <b>20</b>, S23-S30 (2019).</li><li>Chen, X. J., Sun, Y. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Central+circuit+mechanisms+of+itch.">Central circuit mechanisms of itch.</a> <em style='font-style: italic'>Nature Communications</em>. <b>11</b> (1), 3052 (2020).</li><li>Guan, Z., Hellman, J., Schumacher, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Contemporary+views+on+inflammatory+pain+mechanisms:+TRPing+over+innate+and+microglial+pathways.">Contemporary views on inflammatory pain mechanisms: TRPing over innate and microglial pathways.</a> <em style='font-style: italic'>F1000Research</em>. , (2016).</li><li>Boadas-Vaello, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neuroplasticity+of+ascending+and+descending+pathways+after+somatosensory+system+injury:+reviewing+knowledge+to+identify+neuropathic+pain+therapeutic+targets.">Neuroplasticity of ascending and descending pathways after somatosensory system injury: reviewing knowledge to identify neuropathic pain therapeutic targets.</a> <em style='font-style: italic'>Spinal Cord</em>. <b>54</b> (5), 330-340 (2016).</li><li>Guha, D., Shamji, M. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+dorsal+root+ganglion+in+the+pathogenesis+of+chronic+neuropathic+pain.">The dorsal root ganglion in the pathogenesis of chronic neuropathic pain.</a> <em style='font-style: italic'>Neurosurgery</em>. <b>63</b>, 118-126 (2016).</li><li>Shorrock, H. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=UBA1/GARS-dependent+pathways+drive+sensory-motor+connectivity+defects+in+spinal+muscular+atrophy.">UBA1/GARS-dependent pathways drive sensory-motor connectivity defects in spinal muscular atrophy.</a> <em style='font-style: italic'>Brain</em>. <b>141</b> (10), 2878-2894 (2018).</li><li>Sleigh, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Trk+receptor+signaling+and+sensory+neuron+fate+are+perturbed+in+human+neuropathy+caused+by+Gars+mutations.">Trk receptor signaling and sensory neuron fate are perturbed in human neuropathy caused by Gars mutations.</a> <em style='font-style: italic'>Proceedings of the National Academy of Sciences</em>. <b>114</b> (16), E3324-E3333 (2017).</li><li>Rubio, M. A., Herrando-Grabulosa, M., Gaja-Capdevila, N., Vilches, J. J., Navarro, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+somatosensory+neuron+involvement+in+the+SOD1(G93A)+mouse+model.">Characterization of somatosensory neuron involvement in the SOD1(G93A) mouse model.</a> <em style='font-style: italic'>Scientific Reports</em>. <b>12</b> (1), 7600 (2022).</li><li>Sleigh, J. N., West, S. J., Schiavo, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+video+protocol+for+rapid+dissection+of+mouse+dorsal+root+ganglia+from+defined+spinal+levels.">A video protocol for rapid dissection of mouse dorsal root ganglia from defined spinal levels.</a> <em style='font-style: italic'>BMC Research Notes</em>. <b>13</b> (1), 302 (2020).</li><li>Sleigh, J. N., Weir, G. A., Schiavo, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple,+step-by-step+dissection+protocol+for+the+rapid+isolation+of+mouse+dorsal+root+ganglia.">A simple, step-by-step dissection protocol for the rapid isolation of mouse dorsal root ganglia.</a> <em style='font-style: italic'>BMC Research Notes</em>. <b>9</b>, 82 (2016).</li><li>Perner, C., Sokol, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protocol+for+dissection+and+culture+of+murine+dorsal+root+ganglia+neurons+to+study+neuropeptide+release.">Protocol for dissection and culture of murine dorsal root ganglia neurons to study neuropeptide release.</a> <em style='font-style: italic'>STAR Protocols</em>. <b>2</b> (1), 100333 (2021).</li><li>Haberberger, R. V., Barry, C., Matusica, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Immortalized+dorsal+root+ganglion+neuron+cell+lines.">Immortalized dorsal root ganglion neuron cell lines.</a> <em style='font-style: italic'>Frontiers in Cellular Neuroscience</em>. <b>14</b>, 184 (2020).</li><li>Pokhilko, A., Nash, A., Cader, M. Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Common+transcriptional+signatures+of+neuropathic+pain.">Common transcriptional signatures of neuropathic pain.</a> <em style='font-style: italic'>Pain</em>. <b>161</b> (7), 1542-1554 (2020).</li><li>Martin, S. L., Reid, A. J., Verkhratsky, A., Magnaghi, V., Faroni, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gene+expression+changes+in+dorsal+root+ganglia+following+peripheral+nerve+injury:+roles+in+inflammation,+cell+death+and+nociception.">Gene expression changes in dorsal root ganglia following peripheral nerve injury: roles in inflammation, cell death and nociception.</a> <em style='font-style: italic'>Neural Regeneration Research</em>. <b>14</b> (6), 939-947 (2019).</li><li>Miller, R. J., Jung, H., Bhangoo, S. K., White, F. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cytokine+and+chemokine+regulation+of+sensory+neuron+function.">Cytokine and chemokine regulation of sensory neuron function.</a> <em style='font-style: italic'>Handbook of Experimental Pharmacology</em>.  (194), 417-449 (2009).</li><li>Neto, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Axonal+outgrowth,+neuropeptides+expression+and+receptors+tyrosine+kinase+phosphorylation+in+3D+organotypic+cultures+of+adult+dorsal+root+ganglia.">Axonal outgrowth, neuropeptides expression and receptors tyrosine kinase phosphorylation in 3D organotypic cultures of adult dorsal root ganglia.</a> <em style='font-style: italic'>PLoS One</em>. <b>12</b> (7), e0181612 (2017).</li><li>Nascimento, A. I., Mar, F. M., Sousa, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+intriguing+nature+of+dorsal+root+ganglion+neurons:+Linking+structure+with+polarity+and+function.">The intriguing nature of dorsal root ganglion neurons: Linking structure with polarity and function.</a> <em style='font-style: italic'>Progress in Neurobiolology</em>. <b>168</b>, 86-103 (2018).</li><li>Middleton, S. J., Perez-Sanchez, J., Dawes, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+structure+of+sensory+afferent+compartments+in+health+and+disease.">The structure of sensory afferent compartments in health and disease.</a> <em style='font-style: italic'>Journal of Anatomy</em>. <b>241</b> (5), 1186-1210 (2022).</li><li>Nguyen, M. Q., von Buchholtz, L. J., Reker, A. N., Ryba, N. J., Davidson, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-nucleus+transcriptomic+analysis+of+human+dorsal+root+ganglion+neurons.">Single-nucleus transcriptomic analysis of human dorsal root ganglion neurons.</a> <em style='font-style: italic'>eLife</em>. <b>10</b>, e71752 (2021).</li><li>Usoskin, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Unbiased+classification+of+sensory+neuron+types+by+large-scale+single-cell+RNA+sequencing.">Unbiased classification of sensory neuron types by large-scale single-cell RNA sequencing.</a> <em style='font-style: italic'>Nature Neuroscience</em>. <b>18</b> (1), 145-153 (2015).</li><li>Hunt, M. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DRGquant:+A+new+modular+AI-based+pipeline+for+3D+analysis+of+the+DRG.">DRGquant: A new modular AI-based pipeline for 3D analysis of the DRG.</a> <em style='font-style: italic'>Journal of Neuroscience Methods</em>. <b>371</b>, 109497 (2022).</li></ol>

<p class="jove_content">The authors have nothing to disclose.</p>

<p class="jove_content">This protocol provides an easy step-by-step procedure for cryostat sectioning of the mouse DRG to obtain high-quality DRG sections on slides reliably.There are four critical steps in this protocol. First, the DRG sample and the tweezers must be dry before putting the DRG sample onto the base OCT. Any liquid surrounding the DRG sample will form an ice shell around it, resulting in DRG sections separating from the OCT and curving up. Second, if the aluminum block does not have a mark, or if the base OCT covers the mark, it...

<p class="jove_content">The dorsal root ganglion (DRG) contains the primary sensory neurons, the tissue macrophages, and the satellite cells that surround the primary sensory neurons<sup class="xref">1</sup><sup>,</sup><sup class="xref">2</sup><sup>,</sup><sup class="xref">3</sup><sup>,</sup><sup class="xref">4</sup>. It is a key anatomic structure in processing innocuous and noxious signals, and plays critical roles in pain, itch, and various peripheral nerve disorders<sup class="xref">5</sup><sup>,</sup><sup class="xref">6</sup><sup>,</sup><sup class="xref">7</sup><sup>,</sup><sup class="xref">8</sup><sup>,</sup><sup class="xref">9</sup><sup>,</sup><sup class="xref">10</sup><sup>,</sup><sup class="xref">11</sup><sup>,</sup><sup class="xref">12</sup><sup>,</sup><sup class="xref">13</sup>. Although several methods have been developed to dissect DRG tissue from the mouse spinal cord<sup class="xref">14</sup><sup>,</sup><sup class="xref">15</sup><sup>,</sup><sup class="xref">16</sup>, cryosectioning of the DRG tissue remains challenging as the DRG tissue is quite small, and cryostat sections of DRG samples tend to curve into rolls, making it difficult to properly transfer the cryostat sections onto glass slides. However, proper cryosectioning of the DRG tissue is crucial for immunohistochemistry studies and the structure of DRG sensory neurons<sup class="xref">17</sup><sup>,</sup><sup class="xref">18</sup><sup>,</sup><sup class="xref">19</sup><sup>,</sup><sup class="xref">20</sup><sup>,</sup><sup class="xref">21</sup><sup>,</sup><sup class="xref">22</sup><sup>,</sup><sup class="xref">23</sup>. Moreover, as single-cell RNA sequencing results have revealed the remarkable heterogeneity of DRG sensory neurons in both humans<sup class="xref">24</sup> and mice<sup class="xref">25</sup>, proper cryosectioning of DRG tissue is critical for investigating the functional role of different DRG cells in various physiological and pathological conditions.</p>
<p class="jove_content">Although the tissue-clearing technique has been applied to investigate the 3D reconstruction of the DRG<sup class="xref">26</sup> as an alternative technique of cryosectioning the DRG, the tissue-clearing technique is time- and labor-consuming. In comparison, cryosectioning of the DRG is quick and relatively easy to perform, and thus it remains to be a key technique for immunohistochemistry and structure studies of the DRG and other regions of the central nervous system. However, obtaining high-quality, intact, and flat cryostat sections onto glass slides remains to be a challenge in neuroscience research because of the tiny sample size of tissues, like the DRG and certain brain regions, and there is no article describing the optimal protocol at this point for cryosectioning small-sized tissue samples, such as mouse DRGs.</p>
<p class="jove_content">This protocol provides an easy, step-by-step technique for cryostat sectioning of the mouse DRG to reliably obtain as many high-quality DRG sections on the slides for subsequent DRG studies. While specifically designed for cryosectioning DRG samples, this technique can potentially be used for cryosectioning various other tissues with a small sample size.</p>

<table><tbody><tr><td>Avertin</td><td>Sigma-Aldrich</td><td>T48402-25G</td><td>Anesthetize animal</td></tr><tr><td>Epredia&amp;nbsp;Cryotome Cryostat Cryocassettes, 25 mm dia. Crosshatched</td><td>Fisherbrand</td><td>1910</td><td>Hold the OCT section at the bottom&amp;nbsp;</td></tr><tr><td>Ergo Tweezers</td><td>Fisherbrand</td><td>S95310</td><td>Using the end of a tweezer to gently touch the bottom (6 o&amp;rsquo;clock) of the section so that it sticks to the platform surface to prevent the section from curving back in a roll&amp;nbsp;</td></tr><tr><td>Fisherbrand&amp;nbsp;Superfrost Plus Microscope Slides</td><td>Fisherbrand</td><td>1255015</td><td>To collect the DRG section&amp;nbsp;</td></tr><tr><td>Marking pens</td><td>Fisherbrand</td><td>133794</td><td>&amp;nbsp;Mark the orientation of base OCT</td></tr><tr><td>Scigen&amp;nbsp;Tissue-Plus O.C.T. Compound</td><td>Fisherbrand</td><td>&amp;nbsp;23730571</td><td>Embedding medium for frozen tissue specimens to ensure optimal cutting temperature (O.C.T.).</td></tr></tbody></table>

a procedure for mouse dorsal root ganglion cryosectioning

<p class="jove_content">High-quality mouse dorsal root ganglion (DRG) cryostat sections are crucial for proper immunochemistry staining and RNAscope studies in the research of inflammatory and neuropathic pain, itch, as well as other peripheral neurological conditions. However, it remains a challenge to consistently obtain high-quality, intact, and flat cryostat sections onto glass slides because of the tiny sample size of the DRG tissue. So far, there is no article describing an optimal protocol for DRG cryosectioning. This protocol presents a step-by-step method to resolve the frequently encountered difficulties associated with DRG cryosectioning. The presented article explains how to remove the surrounding liquid from the DRG tissue samples, place the DRG sections on the slide facing the same orientation, and flatten the sections on the glass slide without curving up. Although this protocol has been developed for cryosectioning the DRG samples, it can be applied for the cryosectioning of many other tissues with a small sample size.</p>

<p class="jove_content">The current study collected about 16 continuous, high-quality DRG sections from one mouse L4 DRG. The obtained sections were without any distortion. <strong class="xfig">Figure 1</strong> depicts the step-by-step procedure for the cryosectioning. The removal of extra liquid from the tissue sections is shown in <strong class="xfig">Figure 2</strong>. The process of OCT embedment of the tissues is highlighted in <strong class="xfig">Figure 3</strong>. <strong class="xfig">Figure 4</strong> shows the proper placement of the...

Watch this Scientific Journal Video about A Procedure for Mouse Dorsal Root Ganglion Cryosectioning at JoVE.com

Author Spotlight: A Procedure for Mouse Dorsal Root Ganglion Cryosectioning  

<p class="jove_content">Presented here is the development for consistently acquiring high-quality dorsal root ganglion cryostat sections.</p>

A Procedure for Mouse Dorsal Root Ganglion Cryosectioning

High-quality mouse dorsal root ganglion (DRG) cryostat sections are crucial for proper immunochemistry staining and RNAscope studies in the research of ...

a-procedure-for-mouse-dorsal-root-ganglion-cryosectioning

Research

JoVE Journal

Neuroscience

5.9K Views.  Capital Medical University. Presented here is the development for consistently acquiring high-quality dorsal root ganglion cryostat sections.

Video: Author Spotlight: A Procedure for Mouse Dorsal Root Ganglion Cryosectioning  

Recrystallization

<p>Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse="">Recrystallization of Acetanilide<button class="expand">Expand</button>
	<p>In this part of the lab, you&#39;ll purify acetanilide by recrystallization from an aqueous solution. Acetanilide is moderately soluble in boiling water, but it&#39;s much less soluble in room temperature and cold water. Aniline, a potential impurity, is much more soluble in room temperature water. Thus, you&#39;ll first make a saturated solution of acetanilide in boiling water. Then, you&#39;ll slowly cool the solution to room temperature.</p>
	<p>As the acetanilide&#39;s solubility decreases, it will slowly form flat colorless or white crystals. Water-soluble impurities will remain in solution. You will then cool the solution to further decrease the solubility of acetanilide. Finally, you&#39;ll recover the crystals with vacuum filtration and measure the melting point of your crystals.</p>
	<ul class="lab-items">
		<li data-sub-note-item="1-3">
		<div class="lab-step">Before you start the lab, put on a lab coat, safety glasses, and nitrile gloves.</div>
		</li>
		<li data-sub-note-item="1-4">
		<div class="lab-step">To begin, bring a 125-mL Erlenmeyer flask and your lab notebook to the analytical balance to obtain your acetanilide.</div>
		</li>
		<li data-sub-note-item="1-5">
		<div class="lab-step">Measure 2 g of acetanilide in a tared weighing boat and record the precise mass in your lab notebook. Add the acetanilide to the flask and bring it back to your fume hood.
		<h4><strong>Table 1: Recrystallization of acetanilide</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td><strong>Compound</strong></td>
					<td><strong>Mass (g) </strong></td>
					<td><strong>Melting point (&#176;C) </strong></td>
				</tr>
				<tr>
					<td>Acetanilide</td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td>Seed crystal (if used)</td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td>Recrystallized acetanilide<br />
					(<em>subtract seed crystal if used</em>)</td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td><strong>Percent recovery</strong></td>
					<td></td>
					<td></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/58/Table_1._Recrystallization_of_acetanilide.xlsx" target="_blank">Click Here to download Table 1</a></div>
		</li>
		<li data-sub-note-item="1-6">
		<div class="lab-step">Then, measure 30 mL of deionized water and carefully pour it into the flask of acetanilide.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">Place the flask on a stirring hotplate, add a stir bar, and set the hotplate to medium heat and stirring. Let the mixture boil for 4 &#8211; 5 min to dissolve the acetanilide.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">If you see solid acetanilide after the solution has boiled for 5 min, measure another 10 mL of deionized water. Use a Pasteur pipette to add water dropwise until either the solid dissolves or you&#39;ve added all 10 mL.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Let the solution boil for at least a minute after each milliliter before adding more water.<strong> Note:</strong> It&#39;s important to add water slowly so that you don&#39;t cool the solution too much or add more water than you need.</div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">If you still see some solid after that, those are impurities that you must remove by hot filtration. If you do not see solid, continue the lab at step 14.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">To perform hot filtration, place about 15 mL of deionized water and one or two boiling chips in a 50-mL beaker and start heating it on a hotplate.</div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">Clamp another 125-mL Erlenmeyer flask on a hotplate and place a wide stem or stemless glass funnel in the flask. Fold a large piece of circular filter paper in quarters, place it point down in the funnel, and open it into a cone.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">Once the water boils, use a pipette to wet the filter paper with hot water. Then, use tongs to pick up the flask of acetanilide solution and pour the hot liquid into the funnel, being careful not to let it overflow. <strong>Note:</strong> If the stir bar falls into the funnel, retrieve it with tweezers and rinse it with hot water.</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">Then, rinse the inside of the first flask with a few milliliters of hot water, pour the contents into the funnel, and dissolve any crystals that form with hot water.</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">Once the funnel is empty, use tongs to move it to the first flask. Carefully unclamp the second flask. You can now continue with the lab as usual.</div>
		</li>
		<li data-sub-note-item="1-16">
		<div class="lab-step">Once there is no visible solid in your hot acetanilide solution, turn off the heat and stir motor and use tongs to place the flask on the floor of the hood.</div>
		</li>
		<li data-sub-note-item="1-17">
		<div class="lab-step">Leave the solution undisturbed as it cools to room temperature, which usually takes at least 15 min. Moving or shaking the flask will make it harder for crystals to form.</div>
		</li>
		<li data-sub-note-item="1-18">
		<div class="lab-step">While you wait, place a small amount of the starting acetanilide material in a weighing boat and bring it to the melting point apparatus.</div>
		</li>
		<li data-sub-note-item="1-19">
		<div class="lab-step">Pack a capillary tube with the acetanilide and measure and record its melting point.</div>
		</li>
		<li data-sub-note-item="1-20">
		<div class="lab-step">Once the solution cools, look for crystals without moving the flask too much. If you don&#39;t see any, use a glass rod to gently scratch the inside of the flask under the solution. It&#39;s easier for crystals to start to form on scratched or rough surfaces.</div>
		</li>
		<li data-sub-note-item="1-21">
		<div class="lab-step">If crystals still haven&#39;t formed after 10 more min, ask your instructor for a seed crystal of high purity acetanilide. Measure and record the mass of the seed crystal, and then drop it into the room temperature acetanilide solution. Crystal growth will then occur on the seed crystal.</div>
		</li>
		<li data-sub-note-item="1-22">
		<div class="lab-step">Once you see several crystals in the flask, prepare two ice baths in 600-mL beakers. One ice bath should nearly fill the beaker, and the other should occupy about half of the beaker.</div>
		</li>
		<li data-sub-note-item="1-23">
		<div class="lab-step">Measure 5 mL of deionized water and place it in the full ice bath. Confirm that the flask is cool to the touch and that several crystals have formed before gently placing it in the half-full ice bath. Leave the flask undisturbed to improve crystal growth.</div>
		</li>
		<li data-sub-note-item="1-24">
		<div class="lab-step">Check the crystal growth progress every 15 min. Once it looks like most of your acetanilide has crystallized, or you don&#39;t see much crystal growth over a 15-min period, set up for a vacuum filtration using a 125- or 250-mL filter flask.</div>
		</li>
		<li data-sub-note-item="1-25">
		<div class="lab-step">Wet the filter paper with 1 mL of ice-cold water. Then, start the vacuum and pour the contents of the flask into the B&#252;chner funnel of the vacuum filtration setup.</div>
		</li>
		<li data-sub-note-item="1-26">
		<div class="lab-step">Scrape crystals from the flask into the funnel using a glass rod or flexible spatula and rinse the remaining crystals into the funnel with about 1 mL of cold deionized water.</div>
		</li>
		<li data-sub-note-item="1-27">
		<div class="lab-step">Then, stop the vacuum, break the seal, and pour the rest of the cold deionized water into the funnel. Gently stir the crystals with the glass rod for a few seconds to wash them, being careful not to tear the filter paper.</div>
		</li>
		<li data-sub-note-item="1-28">
		<div class="lab-step">Turn on the vacuum to drain the funnel. Then, stop the vacuum, break the seal, and empty the filtrate into a waste beaker. Turn the vacuum back on, and leave the washed crystals in the funnel while the vacuum pump pulls air through them until they are dry, which usually takes about half an hour. You&#39;ll start working on your next recrystallization while you wait.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="2" data-parent-collapse="">Recrystallization of <em>trans</em>-Cinnamic Acid<button class="expand">Expand</button>
	<p>In the second half of the lab, you&#39;ll recrystallize <em>trans</em>-cinnamic acid, which we&#39;ll just call cinnamic acid. Cinnamic acid is soluble in ethanol and nearly insoluble in water. So, you&#39;ll use a mixture of 95% ethanol and 5% water so that cinnamic acid is still soluble at high temperatures but less soluble at low temperatures.</p>
	<ul class="lab-items">
		<li data-sub-note-item="2-2">
		<div class="lab-step">To get started, fill a 5- or 10-mL graduated cylinder with deionized water and bring it to your hood.</div>
		</li>
		<li data-sub-note-item="2-3">
		<div class="lab-step">Then, weigh 0.5 g of cinnamic acid, record its mass, and place it in a 25-mL Erlenmeyer flask.
		<h4><strong>Table 2: Recrystallization of<em> trans</em>-Cinnamic acid</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td><strong>Compound</strong></td>
					<td><strong>Mass (g) </strong></td>
					<td><strong>Melting point (&#176;C) </strong></td>
				</tr>
				<tr>
					<td><em>trans</em>-Cinnamic acid</td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td>Seed crystal (if used)</td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td>Recrystallized<em> trans</em>-cinnamic acid<br />
					<em>(subtract seed crystal if used)</em></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td><strong>Percent recovery</strong></td>
					<td></td>
					<td></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/58/Table_2._Recrystallization_of_trans-Cinnamic_acid.xlsx" target="_blank">Click Here to download Table 2</a></div>
		</li>
		<li data-sub-note-item="2-4">
		<div class="lab-step">Next, obtain 4 mL of 95% ethanol, and pour it into the flask containing cinnamic acid. Place the flask on a hotplate set to medium heat and stir the solution with a glass rod until the cinnamic acid dissolves, which usually takes 7 &#8211; 10 min.</div>
		</li>
		<li data-sub-note-item="2-5">
		<div class="lab-step">Then, turn off the heat and use a Pasteur pipette to add 5 drops of deionized water to the solution. This reduces cinnamic acid solubility. <strong>Note:</strong> If you don&#39;t see precipitation, add up to 5 more drops of water one by one. Stop adding water if you see solids starting to form.</div>
		</li>
		<li data-sub-note-item="2-6">
		<div class="lab-step">Then, remove the flask from the hotplate and let it cool to room temperature undisturbed.</div>
		</li>
		<li data-sub-note-item="2-7">
		<div class="lab-step">While you wait, get a small amount of the starting cinnamic acid and measure its melting point.</div>
		</li>
		<li data-sub-note-item="2-8">
		<div class="lab-step">Once the flask has cooled to room temperature, inspect it for crystals. If you don&#39;t see any, gently scratch the inside of the flask under the solution with the glass rod and wait for 10 min. <strong>Note:</strong> If that still doesn&#39;t work, get a seed crystal of cinnamic acid from your instructor. Remember to weigh the seed crystal and record its mass before you add it to your solution.</div>
		</li>
		<li data-sub-note-item="2-9">
		<div class="lab-step">Once the flask is cool to the touch and contains several crystals, remake the ice baths with one ice bath shallow enough that the 25-mL flask will not be completely submerged.</div>
		</li>
		<li data-sub-note-item="2-10">
		<div class="lab-step">Refill the graduated cylinder with deionized water. Place the flask of cinnamic acid crystals in the shallow ice bath and the water-filled graduated cylinder in the other ice bath. Let the crystals grow for at least 15 min.</div>
		</li>
		<li data-sub-note-item="2-11">
		<div class="lab-step">Your acetanilide crystals should be dry by now, so measure their mass and melting point while you wait for your cinnamic acid to finish crystallizing. Turn off the vacuum and break the vacuum seal.</div>
		</li>
		<li data-sub-note-item="2-12">
		<div class="lab-step">Gently place the B&#252;chner funnel in a clean beaker and bring it to the balance. Measure and record the mass of your pure acetanilide crystals. Remember to subtract the mass of the seed crystal if you used one.</div>
		</li>
		<li data-sub-note-item="2-13">
		<div class="lab-step">Then, bring your crystals to the melting point apparatus and measure and record the melting point.</div>
		</li>
		<li data-sub-note-item="2-14">
		<div class="lab-step">Now, place a clean, dry B&#252;chner funnel with a new piece of filter paper in the filter flask and check on your cinnamic acid. Once it looks like most of the cinnamic acid has crystallized, wet the filter paper with cold deionized water.</div>
		</li>
		<li data-sub-note-item="2-15">
		<div class="lab-step">Start the vacuum and pour the contents of the cinnamic acid flask into the funnel. Scrape the remaining crystals out of the flask with the glass rod and rinse the flask with about 1 mL of cold water.</div>
		</li>
		<li data-sub-note-item="2-16">
		<div class="lab-step">Now, turn off the vacuum, break the seal, and pour the rest of the cold water into the funnel. Gently stir the crystals with the glass rod to wash them, being careful not to damage the filter paper.</div>
		</li>
		<li data-sub-note-item="2-17">
		<div class="lab-step">Turn on the vacuum to drain the funnel. Leave the vacuum running until the cinnamic crystals are dry.</div>
		</li>
		<li data-sub-note-item="2-18">
		<div class="lab-step">Place the B&#252;chner funnel in a beaker and bring it to the balance. Measure and record the mass of your pure cinnamic acid crystals. Remember to subtract the mass of the seed crystal if you used one. Then, measure the melting point of your recrystallized cinnamic acid.</div>
		</li>
		<li data-sub-note-item="2-19">
		<div class="lab-step">Now, dispose of your acetanilide and cinnamic acid in the designated solid waste container. Flush the filtrate down the drain with running water and pour leftover ice and water into the sink.</div>
		</li>
		<li data-sub-note-item="2-20">
		<div class="lab-step">Clean your glassware using your usual methods and put away your other lab equipment.</div>
		</li>
		<li data-sub-note-item="2-21">
		<div class="lab-step">Lastly, discard your used pipettes in the glass waste and throw out used filter paper and other trash in the lab trash container.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="3" data-parent-collapse="">Results<button class="expand">Expand</button>
	<ul class="lab-items">
		<li data-sub-note-item="3-1">
		<div class="lab-step">First, calculate the percent recovery for each compound. We expect that some of each compound stayed in solution, so these percentages will be below the reported purity of your starting material.</div>
		</li>
		<li data-sub-note-item="3-2">
		<div class="lab-step">Now, look at the differences in melting points between the starting material and the crystals. For each compound, the less pure starting material has a lower melting point and a broader range than the recrystallized compound.</div>
		</li>
		<li data-sub-note-item="3-3">
		<div class="lab-step">Lastly, compare your results to the literature values. The melting point of acetanilide is 114 &#176;C, and the melting point of <em>trans</em>-cinnamic acid is 133 &#176;C. The melting points of your crystals should span 1 &#8211; 2 &#176;C and should be at or just below those values.</div>
		</li>
	</ul>
	</li>
</ol>

Recrystallization of Acetanilide and trans-Cinnamic Acid - Procedure

Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA

	Recrystallization of AcetanilideExpand
	In this part of ...

Education

JoVE Lab Manual

Chemistry

Lab Manual Sub Articles

Extraction

Extraction: Liquid-Liquid and Acid-Base Extraction - Procedure

Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA

	Cellulose RecoveryExpand
	Extraction and filtration can ...

Lab Techniques

<p>Source: Smaa Koraym at Johns Hopkins University, MD, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse=""><strong>Determining the Density of an Egg</strong><button class="expand">Expand</button>
	<p>Density is a measure of how compact a substance or object is, and it is calculated as mass divided by volume. When a dense object is placed in a liquid with a lower density, the object sinks; when the object is less dense than the liquid, it floats. When the densities are the same, the object will be suspended in the liquid. In this experiment, we&#39;ll determine the density of an egg by creating a solution with the same density. We&#39;ll measure the density of the salt solution using different volume measurement glassware and determine which is the most accurate.</p>
	<ul class="lab-items">
		<li data-sub-note-item="1-1">
		<div class="lab-step">To begin, wear the appropriate personal protective equipment, including close-toed shoes, long pants, long-sleeved shirt, lab coat, chemical splash goggles, and gloves.</div>
		</li>
		<li data-sub-note-item="1-2">
		<div class="lab-step">Measure the mass of the egg. Set a weigh boat on the balance and tare it. Carefully set the egg in the weigh boat while you record the mass in your notebook.</div>
		</li>
		<li data-sub-note-item="1-3">
		<div class="lab-step">Prepare the salt solution that will be used to suspend your egg. Use the 600-mL beaker and fill it 3/4 of the way full with deionized water.</div>
		</li>
		<li data-sub-note-item="1-4">
		<div class="lab-step">Gently place your egg in the beaker, and then add about one teaspoon of NaCl into the water. Stir the solution gently until the NaCl dissolves. Continue to add NaCl until the egg floats just below the surface.</div>
		</li>
		<li data-sub-note-item="1-5">
		<div class="lab-step">Use different glassware to measure the volume of the salt solution. Weigh the 50-mL graduated cylinder on the top loading balance and record the mass. Then, measure 20 mL of your salt solution and record the volume in your notebook. <strong>Note: </strong>Place a blank sheet of paper behind the graduated cylinder to read the volume more clearly. Always view the measurement at eye level and measure the volume from the bottom of the meniscus. The lines on the graduated cylinder are 0.2 mL apart, meaning that you can read the volume to the hundredths place.
		<h4><b>Table 1: Measuring Mass</b></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Container</strong></td>
					<td style="text-align: center;"><strong>Mass of empty container (g)</strong></td>
					<td style="text-align: center;"><strong>Mass of full containter (g)</strong></td>
					<td style="text-align: center;"><strong>Mass of solution (g)</strong></td>
					<td style="text-align: center;"><strong>Percent error</strong></td>
				</tr>
				<tr>
					<td>50-mL graduated cylinder</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>10-mL volumetric pipette</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>50-mL beaker</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>20-mL volumetric flask</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/41/Table_1._Measuring_Mass.xlsx" target="_blank">Click Here to download Table 1</a></div>
		</li>
		<li data-sub-note-item="1-6">
		<div class="lab-step">Weigh the filled graduated cylinder and record the mass in your notebook. Then, pour the salt solution back into the 600-mL beaker.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">Use the volumetric pipette to measure volume. First, weigh the empty 50-mL beaker and record the mass in your notebook. Then, carefully measure 10 mL of the salt solution using the volumetric pipette and dispense the salt solution into the beaker.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">Measure another 10 mL and add it to the beaker. Weigh the filled beaker and record the mass in your notebook. Then, empty, rinse, and dry the beaker.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Use the volumetric flask to measure volume. Weigh the empty 20-mL volumetric flask and record the mass. Then, carefully fill the flask with the salt solution to just below the 20-mL fill mark. Do not fill it all the way. Use an eyedropper to finish filling the flask so that the bottom of the meniscus just touches the fill line on the neck of the flask. Then, weigh the full flask and record the weight.</div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">Lastly, use the 50-mL beaker to measure volume. Weigh the empty beaker, then fill the beaker with salt solution to the 20-mL line and weigh the full beaker. Record the masses in your notebook.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">Measure the displacement of the egg when it is submerged in the salt solution. First, remove the egg and look at the level of the salt solution in the 600-mL beaker. <strong>Note:</strong> If it is not at a marked line, add deionized water to the solution so that the meniscus is at a readable volume and record the volume.&#160;
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td><strong>Measurements</strong></td>
					<td><strong>Salt solution using 20-mL volumetric flask&#160;</strong></td>
					<td><strong>Egg</strong></td>
				</tr>
				<tr>
					<td>Mass (g)</td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td>Displacement of water (cm)</td>
					<td style="text-align: center;">-</td>
					<td></td>
				</tr>
				<tr>
					<td>Inner diameter of 600-mL beaker (cm)</td>
					<td style="text-align: center;">-</td>
					<td></td>
				</tr>
				<tr>
					<td>Volume (cm&#179;)</td>
					<td style="text-align: center;">-</td>
					<td></td>
				</tr>
				<tr>
					<td>Volume (mL)</td>
					<td style="text-align: center;">20</td>
					<td></td>
				</tr>
				<tr>
					<td>Density (g/mL)</td>
					<td></td>
					<td></td>
				</tr>
			</tbody>
		</table>
		<strong><a href="https://www.jove.com/CDNSource/lm/labs/41/Table_2._Measuring_Density.xlsx" target="_blank">Click Here to download Table 2</a> </strong></div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">Gently place the egg in the beaker.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">Use a ruler to measure the new height of the solution level and record the height. Then, place the ruler across the top of the beaker to measure the inner diameter.</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">Calculate the new volume from these measurements. Subtract the initial volume to obtain the displacement of the egg (volume).</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">To clean up from the experiment, return the egg to your instructor and pour the salt solution down the sink. Rinse all used glassware with tap water and set them out to dry. Finally, return the sodium chloride to your instructor.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="2" data-parent-collapse=""><strong>Results</strong><button class="expand">Expand</button>
	<ul class="lab-items">
		<li data-sub-note-item="2-1">
		<div class="lab-step">Calculate the mass of the solution in each of the different volumetric glassware by subtracting the empty glassware mass from the full glassware mass.</div>
		</li>
		<li data-sub-note-item="2-2">
		<div class="lab-step">Keep track of uncertainty in your measurement by using significant figures. For example, when we look at the graduated cylinder measurement, the weight of the empty container is 90.92, and the weight of the full container is 111.59. The weight measurements have significant figures to the hundredths place, so it is important that significant figures are maintained throughout our calculations. Thus, the mass of the 20-mL salt solution is 20.67 g.</div>
		</li>
		<li data-sub-note-item="2-3">
		<div class="lab-step">The 50-mL beaker weighed 28.65 g when it was empty and 47.96 g when it contained 20 mL of salt solution. Therefore, the mass of 20 mL of the salt solution is 19.31 g.</div>
		</li>
		<li data-sub-note-item="2-4">
		<div class="lab-step">Repeat the calculation to obtain the mass of 20 mL of salt solution that was measured using the 10-mL pipette and the 200-mL volumetric flask.<b> Note:</b> Generally speaking, volumetric measurements are more accurate when using a volumetric flask.</div>
		</li>
		<li data-sub-note-item="2-5">
		<div class="lab-step">Look at the accuracy of the other methods compared to the volumetric flask in terms of percent error. Percent error is calculated by subtracting the theoretical value from the experimental value, then dividing by the theoretical value times 100.
		<ul>
			<li><img src="https://www.jove.com/CDNSource/lm/labs/41/41_Procedure_1b.jpg" /></li>
		</ul>
		</div>
		</li>
		<li data-sub-note-item="2-6">
		<div class="lab-step">Use the volumetric flask measurement as the theoretical value to determine the percent error for the other volume measurement methods. As expected, the volume measurement that uses the markings on the beaker is the least accurate.<strong> Note: </strong>We also know this because the known density of pure water is 1 g/mL. Thus, 20 mL of pure water weighs 20 g. The density of the salt solution must be higher than 20 g since salt was added to the water.</div>
		</li>
		<li data-sub-note-item="2-7">
		<div class="lab-step">Calculate the density of the salt solution using the volumetric flask measurement. Divide the mass of the solution by the volume of the solution. Thus, the density of the salt solution is 1.053 g/mL.</div>
		</li>
		<li data-sub-note-item="2-8">
		<div class="lab-step">Compare the calculated density of the salt solution to the density of the egg. The volume calculated using the displacement of water in a beaker was found to be 61.14 cm<sup>3</sup> or 61.14 mL. The weight of the egg was measured to be 60.15 g, so its density is 0.9838 g/mL. The disparity between the density of the egg and the density of the salt solution arises from error introduced in both calculations, primarily due to volume measurement readings.</div>
		</li>
	</ul>
	</li>
</ol>

Accuracy, Precision, Uncertainty, and Significant Figures - Procedure

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Determining the Density of an EggExpand
	Density is a measure of how compact a substance or ...

Electrolytic Cells

<p>Source: Smaa Koraym at Johns Hopkins University, MD, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse="">Electrolytic Cells<button class="expand">Expand</button>
	<p>In this experiment, you will be assembling an electrolytic cell to perform electroplating. An electrolytic cell contains an anode and cathode connected by a power source, which drives the nonspontaneous redox reaction in the cell. When the anode material is oxidized, the ions travel to the cathode, where they are reduced and plated.</p>
	<p>In the case of this experiment, the electrolytic cell contains a copper anode and a brass key for the cathode. Oxidation of the anode creates copper(2+) ions, which are then reduced on the brass key, forming a thin plating of solid copper.</p>
	<ul class="lab-items">
		<li data-sub-note-item="1-3">
		<div class="lab-step">Put on gloves, safety goggles, and a lab apron, which must be worn at all times.</div>
		</li>
		<li data-sub-note-item="1-4">
		<div class="lab-step">Obtain one 10-ohm resistor, one copper sheet electrode, one copper wire, and one piece of emery paper.</div>
		</li>
		<li data-sub-note-item="1-5">
		<div class="lab-step">Use the emery paper to polish the brass key and the copper sheet. Rinse the key and the copper electrode with water. The brass key will be the cathode, and the copper sheet will be the anode.</div>
		</li>
		<li data-sub-note-item="1-6">
		<div class="lab-step">Take one 50-mL beaker and a watch glass to the instructor&#39;s hood and obtain approximately 20 mL of acetone. Place the watch glass on top of the beaker to prevent evaporation and bring it back to your bench.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">Label the other 50-mL beaker as &#39;organic waste&#39;.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">Use a disposable pipette to rinse the copper electrode and key with acetone. Collect excess in the waste beaker. Place the key and copper electrode on a paper towel to dry.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Measure the initial masses of the key and copper electrode and record their values in your lab notebook.
		<h4><strong>Table 1: Moles of Cu Transferred</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td></td>
					<td style="text-align: center;"><strong>Mass of key (g) </strong></td>
					<td style="text-align: center;"><strong>Change in mass (g) </strong></td>
					<td style="text-align: center;"><strong>Moles Cu plated </strong></td>
					<td style="text-align: center;"><strong>Mass of Cu electrode (g) </strong></td>
					<td style="text-align: center;"><strong>Change in mass (g) </strong></td>
					<td style="text-align: center;"><strong>Moles Cu lost </strong></td>
				</tr>
				<tr>
					<td style="text-align: center;">0 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td style="text-align: center;">5 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td style="text-align: center;">1<sup>st</sup> 30 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td style="text-align: center;">2<sup>nd</sup> 30 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/53/Table_1._Moles_of_Cu_Transferred.xlsx" target="_blank">Click Here to download Table 1</a></div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">Set up the electrolytic cell. Use one electrical wire with alligator clips to connect the negative terminal on the battery to the current probe. Wrap the 10-ohm resistor around the other end of the current probe.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">Use another wire to connect the positive terminal on the battery to the copper electrode.</div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">Wrap the copper wire around the brass key and use an electrical wire to connect the resistor on the current probe to the copper wire on the brass key.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">Obtain about 200 mL of concentrated copper sulfate in a 250-mL beaker. The amount does not need to be exact. Bring the beaker back to your bench and set it on the stir plate. Carefully, place a magnetic stir bar in the beaker and turn the stir setting on to high.</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">Connect the data acquisition system to the current probe and allow the data acquisition system to sense the probe. It should return a reading in amps. Change the rate to two scans per min and the duration to 5 min.</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">Place the brass key in the beaker. Hang it off the side of the beaker so that the key is almost completely submerged but does not touch the magnetic stir bar. <strong>Note: </strong>The copper wire should not be in the solution.</div>
		</li>
		<li data-sub-note-item="1-16">
		<div class="lab-step">Place the copper electrode in the beaker, bending it so that it hangs over the edge of the beaker. Ensure that it is not touching the stir bar or the brass key.</div>
		</li>
		<li data-sub-note-item="1-17">
		<div class="lab-step">Start the scan and let it collect data for 5 min. This will act as a test run to make sure plating occurs on the brass key.</div>
		</li>
		<li data-sub-note-item="1-18">
		<div class="lab-step">After the scan ends, remove the key and copper electrode. The copper plating on the brass key should be evident. If it is not visible, check your circuit to make sure that the battery is connected in the correct orientation.</div>
		</li>
		<li data-sub-note-item="1-19">
		<div class="lab-step">Once you have completed a successful 5-min plating, disconnect the key and copper electrode from the wiring. Remove the copper wire from the key and rinse the key and copper electrode with water and then acetone. Lay them on a paper towel to dry.</div>
		</li>
		<li data-sub-note-item="1-20">
		<div class="lab-step">Measure the masses of the key and the copper electrode and record them in your lab notebook.</div>
		</li>
		<li data-sub-note-item="1-21">
		<div class="lab-step">Reconnect the key and copper electrode and place them back in the solution like before. Restart the run on the data acquisition system, making sure that the rate is set to two scans per min. With the duration set to 30 min, allow the electroplating process to run.</div>
		</li>
		<li data-sub-note-item="1-22">
		<div class="lab-step">After the scan is complete, remove the electrode and key from the solution, disconnect them from the wires, and rinse them with water and then acetone. Allow them to dry on a paper towel, then weigh them and record their masses in your notebook.</div>
		</li>
		<li data-sub-note-item="1-23">
		<div class="lab-step">Reassemble the setup and repeat the electroplating for a second 30-min trial. When the scan is complete, remove the key and copper electrode, rinse them like before, and record their mass.</div>
		</li>
		<li data-sub-note-item="1-24">
		<div class="lab-step">Save the recorded data as a text file on a flash drive.</div>
		</li>
		<li data-sub-note-item="1-25">
		<div class="lab-step">To clean up, turn the stir setting off and remove the stir bar from the solution using forceps. Dispose of the acetone in the organic waste container provided by your instructor. The copper sulfate solution can be reused for future labs, so pour the concentrated copper sulfate back into the carboy.</div>
		</li>
		<li data-sub-note-item="1-26">
		<div class="lab-step">Rinse all of your glassware with water and return it to the instructor.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="2" data-parent-collapse="">Results<button class="expand">Expand</button>
	<ul class="lab-items">
		<li data-sub-note-item="2-1">
		<div class="lab-step">First, calculate the total charge Q that flowed through the system during the different trials. One coulomb is the quantity of electricity flowing through a wire carrying 1 ampere of current in 1 s, thus Q = I x t.</div>
		</li>
		<li data-sub-note-item="2-2">
		<div class="lab-step">Review the current probe data for the first 5-min electroplating trial.<strong> Note: </strong>If the current dropped to 0 or close to 0 at the end of the trial, then the electrons stopped flowing from the copper electrode to the key. Only use the values recorded before the drop in current occurred. If the current drop to 0 early in the plating process, repeat the trial.</div>
		</li>
		<li data-sub-note-item="2-3">
		<div class="lab-step">The current varies over time, so calculate the average current, I.
		<h4><strong>Table 2: Moles of Electrons Transferred</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Trial</strong></td>
					<td style="text-align: center;"><strong>Time (s) </strong></td>
					<td style="text-align: center;"><strong>Current<sub>average</sub> (A) </strong></td>
					<td style="text-align: center;"><strong>Total charge (C) </strong></td>
					<td style="text-align: center;"><strong>Moles (e?) </strong></td>
				</tr>
				<tr>
					<td style="text-align: center;">5 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td style="text-align: center;">1<sup>st</sup> 30 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td style="text-align: center;">2<sup>nd</sup> 30 min</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
				<tr>
					<td style="text-align: center;">Total</td>
					<td></td>
					<td></td>
					<td></td>
					<td></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/53/Table_2._Moles_of_Electrons_Transferred.xlsx" target="_blank">Click Here to download Table 2</a></div>
		</li>
		<li data-sub-note-item="2-4">
		<div class="lab-step">Use the average current over the total time to determine the total charge transferred during electroplating, Q. About 20 coulombs were transferred during the 5-min trial, and between 110 and 120 coulombs were transferred during each 30-min trial. The total charge transferred over the entire 65-min electroplating process was about 250 coulombs.</div>
		</li>
		<li data-sub-note-item="2-5">
		<div class="lab-step">Use the total charge transferred to calculate the moles of electrons plated during each trial. The moles of electrons plated equals the total charge transferred divided by the Faraday constant. The Faraday constant represents the magnitude of electric charge per mole of electrons and is determined by multiplying the charge of an electron by Avogadro&#39;s constant.</div>
		</li>
		<li data-sub-note-item="2-6">
		<div class="lab-step">Determine the moles of electrons that were transferred for the 5-min and 30-min trials.</div>
		</li>
		<li data-sub-note-item="2-7">
		<div class="lab-step">Calculate the moles of copper that were plated on the key after each trial. Similarly, determine the moles of copper lost from the copper sheet electrode.</div>
		</li>
		<li data-sub-note-item="2-8">
		<div class="lab-step">Compare the moles of copper that were lost from the electrode to the amount that was plated to the brass key. The numbers should be close.</div>
		</li>
		<li data-sub-note-item="2-9">
		<div class="lab-step">Check to see if these values match what is expected based on the number of moles of electrons that were transferred. The reduction of 1 mole of copper(2+) ions requires 2 moles of electrons to produce 1 mole of solid copper.</div>
		</li>
	</ul>
	</li>
</ol>

Electrolytic Cells: Construction and Electroplating - Procedure

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Electrolytic CellsExpand
	In this experiment, you will be assembling an electrolytic cell to ...

Extinction

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Diversity and Extinction during the Paleogene Epoch
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Begin this procedure by reading the extinction reading supplement that has been printed out for you. <br /><strong>NOTE:</strong> Alternatively, you may download the reading supplement at the link below.&nbsp; <a href="https://www.jove.com/CDNSource/lm/labs/24/Lab_20_Reading Supplement.docx" style="display:block;margin:20px;" target="_blank">Click here to download the extinction reading supplement</a>
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Using the information contained in the extinction reading supplements pertaining to the taxa of interest and the Chicxulub impact event, make predictions for each taxon listed in Table 1. Consider whether diversity in each taxon increased, decreased, or stayed the same immediately following the Cretaceous-Paleogene boundary and later on in the Paleogene epoch. <a href="https://www.jove.com/CDNSource/lm/labs/24/Table_1_Extinction.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, fill out the reasons for each of your predictions in the Contributing Factors column. HYPOTHESES: The experimental hypothesis is that many of the different taxa will show changes in diversity after the Cretaceous-Paleogene event, and again at the end of the Paleogene, with some increasing in diversity, while others decrease. The null hypothesis is that there will be no changes in diversity between taxa following the Cretaceous-Paleogene event, or at the end of the Paleogene.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Gather diversity data by going to the Paleobiology Database: <a href="http://www.paleobiodb.org" target="_blank">www.paleobiodb.org</a>.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">In the center of the screen, click the yellow box labeled Download Data. Under the italicized heading, &#8220;What do you want to download?&#8221;, select Diversity over time on the left side and Comma-separated values on the right side.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Scroll down to the heading &#8220;Select by taxonomy&#8221;.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">In the first box labeled 'Taxon or taxa to include', type in the name of the taxon that data is being gathered on.  NOTE: Ensure the spelling is correct.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Now, go to the dropdown menu right below that box labeled &#8220;Taxonomic resolution&#8221;, and select genera.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Under the next heading, Select by time, type Maastrichtian into the first box and Chattian in the box directly below. Make sure the dropdown menu labeled Time rule is set to major and the Temporal resolution is set to stage.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Select &#8220;Assume extant taxa range through to present&#8221;. Scroll back up to the middle of the page and click download. A save window will open.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Save the .csv file to a safe and accessible place and rename it to make it easy to identify.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Open the file and scroll down to the main dataset under Records.  NOTE: The data are arranged in reverse time order by geological stage. The second column, interval_name, gives the accepted name of the stage in question. The next two columns give the appropriate dates of the stage in millions of years before the present. The final column, number of occurrences, gives a total count of the genera extant during that geological stage as determined from occurrence of fossils.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">To more easily work with this data, copy and paste each column into a new sheet. Be sure to label this sheet with the taxon in question, the data and time the data were obtained, and the data source.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Repeat this process for each of the taxa in Table 1 (steps 4 &#8211; 12). NOTE: Data from multiple taxa can be kept on the same sheet, so long as they are kept distinct and labeled appropriately.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">To create line plots for each of the taxa showing the change in diversity over time, select the max_ma column and the number of occurrences column simultaneously.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">In Excel, select Insert from the top toolbar and find the section labeled Charts. Select the bottom center icon, Insert Scatter Chart.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Then, select the Scatter with Straight Lines and Markers and a graph should appear. NOTE: Since the axis of this graph is in units of millions of years ago, the axis is in the reverse direction of time when put in numerical order.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">To fix this, click on the green plus sign in the top-right corner of the graph and hover over Axes. This should reveal a small black arrow. Click the arrow to open up a small menu and select More Options.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">This will open the Axis Options menu. Under Axis Options, click the box next to Values in reverse order. NOTE: It is also possible to change the axis scales from this menu, which can be used to eliminate the excess time that is not being analyzed in this lab. Keep any changes consistent between different graphs.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Double-click on the title at the top of the graph and change it to the taxon being represented.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Make a separate graph for each of the taxa in Table 1. Keep them organized and in one location. A separate sheet for graphs is recommended.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">For each graph, identify the location of the Cretaceous-Paleogene boundary and draw a vertical line through the graph at this point.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Using the information from the graphs, fill out Table 2. In some cases, it may be helpful to go back to the original dataset and compare actual values, particularly when they are small. <a href="https://www.jove.com/CDNSource/lm/labs/24/Table_2_Extinction.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Compare these values to the predictions made in Table 1 and discuss if the original contributing factors are still likely candidates.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Using the dataset, calculate the percentage of total taxa that went extinct over the Cretaceous-Paleogene boundary using this equation.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">There is an event in the middle of the Paleogene known as the Paleocene-Eocene Thermal Maximum about 55.5 million years ago. This represents a high point in temperature during the Paleogene epoch at approximately 8 &#176;C higher than today&#39;s average temperature. Does this point seem to have an effect on diversity for any of the taxa? If yes, then which ones?
</div></li></ul></li></ol>

Extinction: Diversity and Extinction during the Paleogene Epoch - Procedure

Diversity and Extinction during the Paleogene Epoch
ExpandBegin this procedure by reading the extinction reading supplement that has been printed out for ...

Biology

Ecology

Microbial and Fungal Diversity

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Examining Microbial Colony Structures
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">To begin, collect your allocated culture plates and then remove the Parafilm and lid from one of them.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Place the uncovered plate under a dissecting microscope and then observe the individual communities within each quadrant of the plate.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">As the colonies are identified, fill out the observed colony properties in the appropriate column in the table.  <a href="https://www.jove.com/CDNSource/lm/labs/28/Table_1_Microbial_diversity.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Then, repeat the observations for each of the other two bacterial species.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">To perform Gram staining of your three bacterial species, first label the ends of three microscope slides with the initials of each bacteria species, your initials, and the date. HYPOTHESES: In this experiment, the experimental hypothesis might be that it is possible to elucidate different bacterial species and shapes using Gram staining, and that Gram-positive bacteria will stain purple with crystal violet whereas Gram-negative bacteria will appear pink due to the safranin counterstain. The null hypothesis could be that all of the bacterial types will retain both stains equally, and staining will not help elucidate their species or shape.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">To begin the first stain, attach a clip to the slide for ease of handling. For each bacterial smear, remember to be sure to use a cleaned and flame-sterilized inoculating loop.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Place two loopfuls of sterile distilled water onto the center of the slide.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">After sterilizing the loop again, cool the loop by touching an uninoculated portion of the agar several times.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Then, remove a small amount of culture from an isolated colony and mix it with the water on the slide.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Allow the slide to dry at room temperature and heat-fix the smear by quickly passing it through a flame.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Once dry, pipette several drops of crystal violet onto the slide and let it sit for two to three minutes.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Carefully rinse the slide with distilled water by aiming the direct flow towards the top of the slide, allowing the water to gently flow down. Do not aim the water flow directly at the smear.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Next, cover the slide with Gram&#39;s iodine, leave it to sit again for two minutes, and then gently rinse with distilled water.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Decolorize the slide with 95% ethanol until stain no longer washes away.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Immediately, rinse the slide with distilled water. This will limit over-decolorizing.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Then, add several drops of safranin counterstain and leave for 30 s. This will stain any Gram-negative cells present.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Gently rinse the slide with distilled water and blot dry with absorbent paper.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">After staining the other two slides in the same manner (steps 6 &#8211; 17), observe each with a microscope.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Use a low power objective first to make coarse adjustments. When you find an ideal section, move on to the higher magnifications.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">After further imaging and adjusting the smear with a medium power objective, add immersion oil directly to the smear. NOTE: The oil is needed for high power objectives that will provide the best micrographs.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Now, use colored pencils to draw the observed bacteria in the appropriate magnification circles and fill in the observed characteristics in the appropriate column, noting the bacteria&#39;s shape and whether it is Gram-positive, identified by darker purple staining, or Gram-negative, identified with pink staining. <a href="https://www.jove.com/CDNSource/lm/labs/28/Table_2_Microbial_diversity.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="1-22"><div class="lab-step">Finally, repeat the observation, drawing, and characterization for the other two stained bacterial slides.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Examining Fungal Structures
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Remove the <em>S. cerevisiae</em> plate from the incubator and place a drop of water onto a microscope slide.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Using a sterilized inoculating loop, smear a film of yeast into the drop of water and place a cover slip over the slide.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Place the slide under the microscope at the lowest magnification, increasing the magnification to the oil immersion setting to see the individual yeast cells.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Observe the general shape and structure of the yeast and identify any cells that are undergoing asexual reproduction by budding.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Now, draw the cells in the appropriate magnification circles.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">When you are done observing the yeast, replace the <em>S. cerevisiae</em> slide with a prepared Ascomycetes apothecium slide and set the microscope to the lowest magnification.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Using colored pencils, draw the structures at low and high magnifications, including the asci and ascospores.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Finally, place a button mushroom, <em>Agaricus bisporus</em>, under the dissecting microscope and draw the features, including the pileus, or cap, the gills, and the stipe, or stalk.
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">Using the coloring of the bacteria recorded in the table, determine which species are Gram-positive and which are Gram-negative.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Then, look at the shapes recorded in the table to determine which bacterial species are bacillus, coccus, or spirillum.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Next compare your illustrations of the yeast cells to your illustrations of the bacterial cells. NOTE: Yeast from the Ascomycetes phylum, such as <em>S. cerevisiae</em>, can reproduce asexually, which can be observed through the budding of the cells under a microscope.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Record any observations of yeast cells budding.  NOTE: Ascomycetes can also reproduce sexually via mitosis and haploid spore formation.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">Record any observations of spore or asci formation you observed in the table.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">NOTE: Fungus from the Basidiomycota phylum exhibit clearly observable gills under the pileus.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Record any fungal species that demonstrated gills under the pileus.
</div></li></ul></li></ol>

Microbial Colony and Fungal Diversity - Procedure

Examining Microbial Colony Structures
ExpandTo begin, collect your allocated culture plates and then remove the Parafilm and lid from one of them.
Place ...

Evolution

Cell Structure

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Visualizing Onion and Human Cells
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">In this experiment you will prepare different types of cells from a plant and animal, onion and human respectively, and then visualize them under a microscope. HYPOTHESES: The experimental hypothesis is that the cells will appear different in overall shape and membrane structure, but there will be some shared similar structures, like nuclei, in both cells. The null hypothesis of the experiment is that there will be no difference in structure between the two cell types.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">First, to prepare an animal cell slide, start by pouring 30 mL of distilled water into a beaker.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, use a glass dropper to place 2 - 3 drops of the water onto the center of a clean microscope slide.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Next, take a clean toothpick and scrape the inside of your cheek to gather cells.  CAUTION: Do not scrape your cheeks too aggressively. The scraping should not cause discomfort or bleeding. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Put the end of the toothpick with the cheek cells onto the wetted area of the slide and mix the water and cheek cells together.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Next, add two drops of methylene blue staining solution to the wetted area of the slide and mix it in with a clean toothpick.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Let the mixture sit at room temperature for 3 minutes.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">After 3 minutes have passed, use a glass dropper to add a drop of glycerol to the mixture.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Carefully, place a cover slip over the mix on the slide by first standing one end of the cover slip vertically and aligning it along to one side of the mixture. Then, carefully lower the other end of the cover slip down until the mixture is completely covered.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Finally, remove any excess liquid with blotting paper.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Next, prepare a slide of plant cells by placing five drops of distilled water into a clean watch glass.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Then, with forceps, take a thin strip of onion and place it into the water.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Apply 5 drops of safranin solution to another watch glass.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Now using a pair of forceps transfer the piece of onion from the distilled water into the safranin.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Allow the onion to soak for 30 seconds.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Then, again with forceps, move the onion back into the distilled water.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Now, place 3 drops of glycerol onto the center of a glass microscope slide.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Using the forceps again, transfer the onion into the glycerol on the slide.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Gently place a cover slip over the onion on the slide and blot away any excess liquid with a piece of blotting paper.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Next, you will visualize the slides you have prepared using a compound microscope. First, turn on the scope and set the objective lens to the lowest level of magnification.  NOTE: A compound microscope typically has two levels of magnification.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Place the cheek tissue slide onto the stage of the microscope and bring the cells into focus by adjusting the stage and using the coarse adjustment knob.
</div></li><li data-sub-note-item="1-22"><div class="lab-step">When the cells are in focus, observe the individual cells and draw what you see. Repeat these observations at medium and high magnifications adjusting the focus with the fine adjustment knob. IMPORTANT: Do NOT use the coarse adjustment knob at high magnifications. 
</div></li><li data-sub-note-item="1-23"><div class="lab-step">Next, rotate the nose piece so that the oil lens is almost in place.
</div></li><li data-sub-note-item="1-24"><div class="lab-step">Place a drop of immersion oil on top of the cover slip of the cheek cell slide.
</div></li><li data-sub-note-item="1-25"><div class="lab-step">Use the oil lens to view the cheek cells and record your observations.
</div></li><li data-sub-note-item="1-26"><div class="lab-step">Repeat these steps to view the onion plant cell, moving again from low to medium, high, and oil lenses (steps 20 &#8211; 24).
</div></li><li data-sub-note-item="1-27"><div class="lab-step">Record all of your observations and note the differences you see between animal and plant cells.
</div></li><li data-sub-note-item="1-28"><div class="lab-step">When you are finished, place the cheek cell slide and toothpicks into a diluted bleach solution. Dispose of the cover slips into a glass waste container.
</div></li><li data-sub-note-item="1-29"><div class="lab-step">Finally, turn off the microscope and clean the lenses with lens cleaning paper.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Calculate the total magnification for each of the viewing levels. Remember to account for both the eyepiece magnification and the objective lens magnification. NOTE: Eye piece: 10X magnification, Objective lens: 4X, 10X, and 40X magnification
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Then, identify the structural differences between plant and animal cells using the observations made under the microscope.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Label the nuclei in both cell types and then highlight or note any differences that you see between them.
</div></li></ul></li></ol>

Cell Structure: Visualizing Onion and Human Cells - Procedure

Visualizing Onion and Human Cells
ExpandIn this experiment you will prepare different types of cells from a plant and animal, onion and human ...

Fundamentals

Genetics of Organisms

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">REF and WEF Fly Genetics
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: At your station, you should have four vials of flies. They will be labeled as male or female. They will also be labeled with the notation REF for red-eyed flies or WEF for white-eyed flies. The female vial should also be labeled virgin as these flies should be unmated for the purpose of this experiment.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Make sure you have around five flies in each vial. NOTE: You will perform crosses using these flies to determine if red or white eyes is dominant and if the trait is sex-linked. You should also have two fly anesthesia wands, a paint brush, magnifying glass, fly anesthetic, some empty fly vials, and a sheet of white paper.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Draw a line in the middle of the paper to make a male side and a female side.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Dip the fly anesthesia wand into the solution and insert it into the red-eyed female vial until the flies stop moving.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Then, dip the same wand into the white-eyed male vial until these flies are also anesthetized.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Tap the flies from the two vials onto the sheet - Females on one side and males on the other.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Check to make sure that all the flies from the female vial are female and likewise, confirm that the male flies are male.  NOTE: Males are slightly smaller and have a darker solid pigment on the end of their abdomen. Females are larger and have stripes rather than a solid spot.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">If there are any male flies in the female vial, obtain a new vial as these females likely have sperm from males from their own strain and are unusable.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Now, move the five red-eyed females and five white-eyed males into a new vial using the paintbrush.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Label this vial to indicate that this is a cross between red-eyed females and white-eyed males. HYPOTHESES: Use Punnett squares to formulate hypotheses for this experiment. Consider what you will see in a few days if the white allele is dominant and there is no effect of parental sex. What if red is dominant? Under the potential offspring genotype in each box, write the expected phenotype.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">To set up the reverse cross, again dip the fly anesthesia wand into the solution and insert it this time into the white-eyed female vial and then the red-eyed male vial until all the flies have stopped moving.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Tap the flies onto a sheet of white paper and check to make sure that all the flies from the female vial are female and likewise with the male flies.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Now, move the five white-eyed females and five red-eyed males into a new vial using the paintbrush.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Label this vial to indicate that this is a cross between white-eyed females and red-eyed males.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Finally, place the two tubes containing the new crosses into a rack for incubation at room temperature. NOTE: After about three days, larvae should be moving around in the vial.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Remove the 10 adult flies and dispose of them into the morgue tube containing 70% ethanol.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Now, put the tubes back in the rack and let the larvae mature until they reach the adult stage in up to two weeks.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Once all of the larvae from these crosses have matured to adulthood, anesthetize the flies in one of the tubes using the wand.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Then, on a piece of white paper, sort the flies by sex and phenotype and then record these data.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Now, repeat this process and tally the sexes and phenotypes for the second cross (steps 1 &#8211; 18).
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Finally, once you have counted all of your flies, dispose of them in the morgue vial.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To begin investigating your results, first compare the data you collected with the hypothesis you made using the Punnett squares.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Did your data match the simple Punnett square hypothesis where red or white is dominant and there is no effect of sex? Compare your data with other lab groups.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">If your data does not match what your Punnett squares predicted, does this indicate that the gene may be sex-linked?
</div></li><li data-sub-note-item="2-4"><div class="lab-step">If the red gene were dominant and sex-linked, when we cross red-eyed females with white-eyed males, all of the offspring would have red eyes. Assuming all of the females were homozygous for the color allele, does this match your data for the first cross?
</div></li><li data-sub-note-item="2-5"><div class="lab-step">If white were dominant and the gene were sex-linked, we would see the exact opposite. So all of the flies would have white eyes. From your data, can you conclude from your first cross whether red or white is dominant?
</div></li><li data-sub-note-item="2-6"><div class="lab-step">When the reciprocal cross of white-eyed females and red-eyed males is performed, if the red phenotype is dominant, all of the females would be red and all of the males would be white. This would also confirm that the gene is specifically x-linked because white-eyed females could then only be produced in crosses with white-eyed males. Did your second cross produce any white-eyed females?
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Finally, if the gene were x-linked and white was dominant, crossing white-eyed females with red-eyed males would result in all of the offspring having white eyes. Does this hypothesis fit with your second cross?
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Look over your data and conclude which of the hypotheses best fits the patterns you found in your crosses. If your data does not fit with any of these, hypothesize why this might be the case.
</div></li></ul></li></ol>

Genetics of Organisms: REF and WEF Fly Genetics - Procedure

REF and WEF Fly Genetics
ExpandNOTE: At your station, you should have four vials of flies. They will be labeled as male or female. They will also be ...

Genetics

Cell Division

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Observing the Cell Cycle in a Root Tip
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Hypotheses: The experimental hypothesis is that in root tips slices that have been treated with nocodazole, a chemical that interferes with microtubular polymerization, all of the cells will be arrested at the same stage of the cell cycle and that in untreated onion tip slices all of the different stages of the cell cycle will be visualized. The null hypothesis is that there will be no differences in mitosis between the two groups and that different stages of the cell cycle will be visualized. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">To prepare for this experiment you will use an onion that has been placed in water for several days until new white root tips have begun to sprout. Use a razor blade to cut a 1 cm piece from the end of one of the root tips. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Place the slice of onion into a microcentrifuge tube labeled &#8220;N&#8221; for the nocodazole condition. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Then, cut a second 1 cm piece of onion root tip and place in a microcentrifuge tube labeled &#8220;C&#8221; for the control condition.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Add 2 &#181;L of the 5 mg/mL nocodazole to 1 mL of water in the microcentrifuge tube labeled N and 1 mL of water only to the tube labeled C. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Leave the tubes containing the root tips to incubate for 12 hours and wipe down the workspace with 70% ethanol.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">When incubation is complete, set a heat block to 60 &#186;C.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Wash the nocodazole treated tips with water and then aspirate the liquid.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Repeat this wash two more times, for a total of three washes. 
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Fill both tubes with 1 mL of one normal hydrochloric acid. Incubate the tubes in a 60 &#186;C heat block for 12 - 15 min, then discard the acid into a waste flask.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Now, add 1 mL of distilled water drop wise to the tubes at least three times to rinse the samples.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Now add one microliter of DAPI stain to 10 mL of phosphate buffered saline (PBS).
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Then place 50 &#181;L of this dilute DAPI stain into each tube, and leave them at room temperature to incubate for 12 min. 
</div></li><li data-sub-note-item="1-14"><div class="lab-step">After this, preform three distilled water washes as in step 10. 
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Label one microscope slide as 'Control' and another as 'Nocodazole'. 
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Transfer the stained roots onto their respective microscope slides and add a drop of water to the control slide and a drop of nocodazole to the nocodazole slide.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Use the razor blade to remove the unstained portions of each root tip and place a glass cover slip over each sample.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Carefully press down on each cover slip with a gloved fingertip, and then let the slides sit for 10 min. 
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Finally, view the slides under the 40X objective of a fluorescence microscope and capture images of your root tip cell preparations.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Understanding the Loss of Cell Cycle Control
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">NOTE: Before cells can pass through all of the stages of the cell cycle there are several checkpoints they must go through. These checkpoints are regulated by cyclin and cyclin-dependent kinase proteins, or CDKs. If the cyclins and CDKs determine that previous cellular events have not been adequately completed they will arrest the cells at this step and prevent them from proliferating. In cancer cells one or several of these molecular restraints for regulating cell division are lost and this allows the damaged cells to escape from cell proliferation control. These abnormal cells develop into tumors which are masses of uncontrolled proliferating cells that interfere with the normal functions of the body. Notice how before it divides this cancer cell rounds up and refracts light very strongly under the light microscope. This is because not all cancer cells successfully divide into daughter cells after each round of mitosis. This will mean that they often contain an excess of organelles and DNA and this increase in cellular content means they will refract light more intensely than normal cells do. 
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">Examine your collected images and record in Table 1 the different cell structures and stages that could be identified in the onion tip slice that was treated with nocodazole. <a href="https://www.jove.com/CDNSource/lm/labs/10/Table_1_Cell_division.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="3-2"><div class="lab-step">If there are any cells undergoing mitosis, note what stages of cell division you see.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Record the percentage of cells in each stage of mitosis in Table 1. 
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Next, examine the images of the untreated onion tip slice, and record what cell structures can you identify. 
</div></li><li data-sub-note-item="3-5"><div class="lab-step">If there are any cells undergoing mitosis, consider what stages of cell division you see, and record the percentages of cells in each stage of mitosis in the Table 1. 
</div></li></ul></li></ol>

Cell Division: Observing Cell Cycle in a Root Tip - Procedure

Observing the Cell Cycle in a Root Tip
ExpandHypotheses: The experimental hypothesis is that in root tips slices that have been treated with nocodazole, a ...

Cellular Processes

Animal Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Making Choice Chambers
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Before beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the bottom of both bottles. One line should be 1 cm from the base of the bottle and the other should be 1.5 cm from the base of the bottle.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Use a razor blade to make a small cut in each bottle at the mark. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, insert the scissors and carefully cut along the line until the bottoms of the bottles are removed completely.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Fit one bottle bottom into the other.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Tape the bottles together to make a secure chamber.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Use the razor blade and scissors to poke a hole into the center of the chamber. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Take a piece of tape and fold the edge onto itself to make a tab and place the tape over the hole.  Note: The tab helps with easy removal and reattachment of the tape to the chamber.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Use the Sharpie to label one side of the chamber A and the other side B.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Upon receiving the colony of <em>Drosophila</em>, perform a count to make sure there are 40 living individuals in the vial.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Geotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To perform a geotaxis assay, first attach a clean, empty bottle cap to each end of the choice chamber and turn the fly vial upside down onto its lid.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Open the tape flap in the center of the choice chamber.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Insert the funnel into the hole and tap all of the flies into the chamber. HYPOTHESES: The alternate hypothesis is that more flies will be moving against gravity, or up, regardless of the orientation of the choice chamber. Alternatively, if the flies are positively geotactic, then more flies will move down, or with gravity. The null hypothesis is that the flies will have no preference with regard to gravity and will move randomly within the chamber. 
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Once the <em>Drosophila</em> are in the chamber, close the tape flap, rotate the chamber so that it stands vertically with side A on the bottom, and start the timer.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Immediately, count the number of <em>Drosophila</em> that are moving up and the number that are moving down. Record these data for time point 0 in the table. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">After 30 seconds, rotate the chamber so that side B is on the bottom and count the number of <em>Drosophila</em> that are moving up or down. Record these data for time point 30 in the table.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">After 60 seconds, rotate the chamber so that side A is on the bottom again and record the number of moving flies for time point 60.  <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_1_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Hold the chamber over the fly vial and carefully open the cap to return all of the <em>Drosophila</em> back to their empty vial. 
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Phototaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">To perform a phototaxis analysis, first cover side A of the choice chamber with tin foil, taking care that the foil reaches to the exact center between the two sides. 
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Ensure the caps are secured on both ends of the chamber.  HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found in the light side of the choice chamber, if the flues are attracted to light, or on the dark side if they are repelled by light. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus. Therefore, equal numbers of flies will be found on either side of the choice chamber.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Open the tape flap in the center of the choice chamber, insert the funnel into the hole, and tap all 40 flies into the chamber as previously described.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Set the timer to sound an alarm at 10 minutes.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">When the alarm sounds, stop the timer, and count the number of flies in the open side B of the chamber.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Subtract that number from the total number of flies added to the choice chamber to calculate the number of flies in the covered side A.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Record these data in the table for time point 10.  <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_2_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Carefully, return all of the flies back to their empty vial.
</div></li></ul></li><li data-note-item="4" data-parent-collapse="">Chemotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="4-1"><div class="lab-step">HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found on the side of the chamber with the apple cider vinegar if the flies are attracted to the odor. Or, if the flies are repelled by the vinegar, then more of them will be found on the side of the chamber presenting the odorless water. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus and will move randomly in the chamber.  Use an individual disposable plastic pipette to dispense two drops of the apple cider vinegar onto one cotton ball for side A of the chamber. 
</div></li><li data-sub-note-item="4-2"><div class="lab-step">Use an individual disposable plastic pipette to dispense two drops of the distilled water onto a cotton ball for side B of the chamber. 
</div></li><li data-sub-note-item="4-3"><div class="lab-step">Fold two pieces of tape over themselves to create individual pieces of double-sided tape and use the tape to attach each cotton ball to the inside of the single bottle cap.
</div></li><li data-sub-note-item="4-4"><div class="lab-step">Screw the bottle caps with the cotton balls onto their corresponding sides of the chamber.
</div></li><li data-sub-note-item="4-5"><div class="lab-step">Transfer all of the flies into the chamber and set the timer to sound an alarm after 10 minutes. 
</div></li><li data-sub-note-item="4-6"><div class="lab-step">When the alarm sounds, stop the timer and record the number of flies in each side of the chamber. <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_3_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="4-7"><div class="lab-step">At the end of the final experiment, funnel the flies into a morgue tube containing 70% ethanol. 
</div></li><li data-sub-note-item="4-8"><div class="lab-step">Dismantle the choice chambers for recycling.  NOTE: Since all of the chemicals used in these experiments are lab safe, the liquids can be disposed of down the sink, the chambers rinsed, and the solids can be thrown away in the trash. 
</div></li></ul></li><li data-note-item="5" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="5-1"><div class="lab-step">Gather all of the data collected for the geotaxis, phototaxis, and chemotaxis experiments.
</div></li><li data-sub-note-item="5-2"><div class="lab-step">Plot these values as bar graphs for different conditions and different time points.
</div></li><li data-sub-note-item="5-3"><div class="lab-step">Use these data to draw inferences about the behavior of <em>drosophila melanogaster</em>. 
</div></li></ul></li></ol>

Animal Behavior: Studying Taxis Behavior of Drosophila - Procedure

Making Choice Chambers
ExpandBefore beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the ...