ونحن ممتنون لتيسييه آلان لتقديم المشورة القيمة والمناقشات ، والدعم التقني. نعترف مركز للتطبيقات البيولوجية للالطيف الكتلي في جامعة كونكورديا للخدمات متميزة. وأيد هذا العمل من المنح المقدمة من CIHR NSERC وكندا. فيتامين هو محقق جديد CIHR وكرسي أبحاث جامعة كونكورديا في علم الجينوم ، بيولوجيا الخلية والشيخوخة.

المواد والأساليب <ol style=";text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> سلالات الخميرة وظروف النمو كانت تزرع سلالة من النوع البري BY4742 (MATα his3Δ1 leu2Δ0 lys2Δ0 ura3Δ0) في المتوسط ​​YEPD الغنية (1 ٪ خلاصة الخميرة ، ببتون 2 ٪ ، السكر بنسبة 2 ٪). والخلايا المستزرعة في 30 درجة مئوية مع الهز التناوب في 200 دورة في الدقيقة في قوارير مخروطي في نسبة &quot;قارورة حجم / متوسطة الحجم&quot; ل05:01. </li><li style=";text-align:right;direction:rtl"> تخزين خلايا الخميرة لاستخراج الدهن <ol style=";text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> وكان حصاد ثقافة 50 مل من الخلايا بواسطة الطرد المركزي في 3000 x ج لمدة 5 دقائق. </li><li style=";text-align:right;direction:rtl"> غسلها مرتين بالماء البارد. <ol style=" list-style-type:lower-alpha;;text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> Resuspend بيليه في 25 مل من ماء الجليد الباردة </li><li style=";text-align:right;direction:rtl"> بيليه الخلايا في جهاز الطرد المركزي في 3000 x ج لمدة 5 دقائق </li></ol></li><li style=";text-align:right;direction:rtl"> Resuspend وبيليه ونقل إلى أنبوب إيبندورف </li><li style=";text-align:right;direction:rtl"> بيليه بواسطة الطرد المركزي ، 16000 XG لمدة 2 دقيقة ، وتجميد إزالة طاف في -80 درجة مئوية حتى الاستخدام. (حافظنا استخدام كوب من الكحول الآيزوبروبيل -80 في الثلاجة ، ويمكن أيضا أن يستخدم النيتروجين السائل) </li></ol></li><li style=";text-align:right;direction:rtl"> الكواشف والكلوروفورم والميثانول الصف التكنولوجيا الحيوية من سيغما الدريخ. تم شراؤها الأحماض الدهنية الحرة وtriacylglycerols من Larodan (مالمو ، السويد). تم الحصول عليها من الدهون أفانتي القطبية (المرمر ، AL ، الولايات المتحدة) -- أنواع مختلفة من الدهون الفوسفاتية -- بما في ذلك فسفاتيديل كولين ، فسفاتيديل إيثانولامين ، فسفاتيديل إينوزيتول ، فسفاتيديل ، وحامض الفسفاتيديك وcardiolipins. وكانت عالية السرعة أنابيب الطرد المركزي الزجاج مع قبعات من تفلون اصطف فيشر. </li></ol> استخراج الدهن هذا هو تعديل للبروتوكول والتي وصفها بلاي داير 8. وينبغي أن يتم التلاعب مع جميع الدهون المستخرجة باستخدام ماصات زجاجية أو المحاقن واللدائن سيتم إنشاء إشارة الخلفية كبيرة إذا كانوا يخالطون الكلوروفورم. كميات الدقيق ليست مهمة طالما أن نسب 1:2:0.8 لكلوروفورم -- يتم حفظها H 2 O في الخطوة 7 -- MeOH -- H 2 O في الخطوة (3) وبالنسبة لكلوروفورم 2:2:1.8 -- MeOH. <ol style=";text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> Resuspend الخلايا المجمدة في 1.6 مل من الجليد الباردة المقطر O. 2 H </li><li style=";text-align:right;direction:rtl"> نقل 1.6 مل من تعليق لخلية عالية السرعة أنابيب الطرد المركزي الزجاج. </li><li style=";text-align:right;direction:rtl"> إضافة 6 مل من مزيج (1:2) الكلوروفورم وMeOH و 0.8 مل من الخرز الزجاجي إلى تعليق الخلية. </li><li style=";text-align:right;direction:rtl"> وقف دوامة زنزانة مع الخرز الزجاجي مرتين لمدة 1 دقيقة. </li><li style=";text-align:right;direction:rtl"> إضافة 2 مل من الكلوروفورم والمزيج بلطف. </li><li style=";text-align:right;direction:rtl"> احتضان لمدة 5 دقائق في درجة حرارة الغرفة مع خلط في بعض الأحيان. </li><li style=";text-align:right;direction:rtl"> إضافة 2 مل من H 2 O المقطر ومزيج بلطف. </li><li style=";text-align:right;direction:rtl"> احتضان لمدة 5 دقائق في درجة حرارة الغرفة مع خلط في بعض الأحيان. </li><li style=";text-align:right;direction:rtl"> أجهزة الطرد المركزي لمدة 5 دقائق في 3000 XG في درجة حرارة الغرفة. </li><li style=";text-align:right;direction:rtl"> جمع مرحلة بأكملها السائل في جديدة عالية السرعة الزجاج أنبوب الطرد المركزي. </li><li style=";text-align:right;direction:rtl"> إضافة 3.2 مل من الكلوروفورم إلى خلية من الكريات الخطوة 9. </li><li style=";text-align:right;direction:rtl"> دوامة مرتين لمدة 1 دقيقة. </li><li style=";text-align:right;direction:rtl"> أجهزة الطرد المركزي لمدة 5 دقائق في 3000 XG في درجة حرارة الغرفة. </li><li style=";text-align:right;direction:rtl"> إضافة طاف في المرحلة السائلة من الخطوة 10. </li><li style=";text-align:right;direction:rtl"> أجهزة الطرد المركزي لمدة 5 دقائق في 3000 XG في درجة حرارة الغرفة. </li><li style=";text-align:right;direction:rtl"> تجاهل العليا (المائي) مرحلة ونقل خفض (العضوية) في المرحلة الجديدة عالية السرعة الزجاج أنبوب الطرد المركزي. </li><li style=";text-align:right;direction:rtl"> أجهزة الطرد المركزي لمدة 5 دقائق في 3000 XG في درجة حرارة الغرفة. </li><li style=";text-align:right;direction:rtl"> نقل طاف كله في قارورة زجاجية والجافة تحت النيتروجين. </li><li style=";text-align:right;direction:rtl"> حل الفيلم الدهون في 500 ميكرولتر من الكلوروفورم ومخزن في -20 درجة مئوية. </li></ol> تحليل الدهون بواسطة مطياف الكتلة وينبغي إعداد مزيج من المعايير المخزون الدهني في الكلوروفورم مسبقا وفقا للجدول رقم 1 ، وكذلك حل سهم MeOH -- كلوروفورم (1:1) بنسبة 0.1 ٪ (V / V) هيدروكسيد الأمونيوم. <ol style=";text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> قبل الحقن ، والجمع بين 10 ميكرولتر من عينة مع 10 ميكرولتر من مزيج من الدهون القياسية المنصوص عليها في الجدول رقم 1. في 200μL من كلوروفورم 01:01 : الميثانول بنسبة 0.1 ٪ NH 4 OH. <ul style=";text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> يمكن تغيير القياسي لنسبة العينة حسب الحاجة. </li></ul></li><li style=";text-align:right;direction:rtl"> حل الدهون باستخدام Q - TOF Micromass مطياف الكتلة 2 مجهزة التشغيل مصدر نانو electrospray في معدل التدفق من 1 ميكروليتر / دقيقة. <ul style=";text-align:right;direction:rtl"><li style=";text-align:right;direction:rtl"> سوف المعلمات صك بالضبط تختلف من أداة للصك. انظر الجدول رقم 2 للحصول على الإعدادات لMicromass Q - TOF 2 (ووترز ، ميلفورد ، MA ، الولايات المتحدة الأمريكية) مجهزة مصدر نانو electrospray. على الرغم من أننا قد استفادت من ارتفاع القرار من نوع Q - TOF من مطياف الكتلة ، ليس شرطا الزاميا. </li></ul></li><li style=";text-align:right;direction:rtl"> وبعد اكتساب ممهدة الأطياف الشامل ، والخلفية ، وتركزت تطرح ، ثم قائمة ذروة تصدير إلى Excel. ثم يتم تطبيع القمم من كل فئة على مستوى الدهون الداخلية. اعتمادا على التطبيق ، قد يكون من الضروري القيام إجراء مزيد من مرحلة ما بعد المعالجة مثل deisotoping وdeconvolution. </li></ol> الجدول 1. المعايير الدهون الداخلية ، على التركيزات فيمزيج القياسية ، ووضع MS لتحليلها. <table border="1" cellspacing="0" cellpadding="0" style=";text-align:right;direction:rtl"><tbody><tr><td> الطبقة الشحمية </td><td> سلسلة التكوين القياسية </td><td> كتلة القياسية </td><td> تركيز (ميكروغرام / مل) </td><td> MS النمط </td></tr><tr><td> حمض الفسفاتيديك </td><td> 14:0 / 14:0 </td><td> 591.40 </td><td> 100 </td><td> سلبي </td></tr><tr><td> فسفاتيديل إيثانولامين </td><td> 14:0 / 14:0 </td><td> 634.45 </td><td> 200 </td><td> سلبي </td></tr><tr><td> فسفاتيديل إينوزيتول </td><td> N / A </td><td> N / A </td><td> N / A </td><td> سلبي </td></tr><tr><td> فسفاتيديل </td><td> 14:0 / 14:0 </td><td> 622.37 </td><td> 40 </td><td> سلبي </td></tr><tr><td> كارديوليين </td><td> 4x14 : 0 </td><td> 619.92 </td><td> 100 </td><td> سلبي </td></tr><tr><td> الأحماض الدهنية الحرة </td><td> 19:00 </td><td> 297.28 </td><td> 100 </td><td> سلبي </td></tr><tr><td> فسفاتيديل كولين </td><td> 14:0 / 14:0 </td><td> 650.48 </td><td> 100 </td><td> إيجابي </td></tr><tr><td> Triacylglycerols </td><td> 13:0 / 13:0 / 13:0 </td><td> 698.63 </td><td> 200 </td><td> إيجابي </td></tr></tbody></table> الجدول 2 ضبط آلات لTOF - Q Micromass 2 (ووترز ، ميلفورد ، MA ، الولايات المتحدة الأمريكية) مجهزة مصدر نانو electrospray. <table border="1" cellspacing="0" cellpadding="0" style=";text-align:right;direction:rtl"><tbody><tr><td></td><td> معدل التدفق </td><td> مخروط الجهد </td><td> الشعرية الجهد </td><td> اصطدام الغاز </td></tr><tr><td> وضع إيجابي </td><td> 1μl/min </td><td> ت -28 </td><td> 3.0 ك. </td><td> 10 </td></tr><tr><td> النمط السلبي </td><td> 1μl/min </td><td> ت 30 </td><td> -3،2 ك. </td><td> 10 </td></tr></tbody></table>

<ol>
	<li>Cao, H., Gerhold, K., Mayers, J. R., Wiest, M. M., Watkins, S. M., Hotamisligil, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+a+lipokine,+a+lipid+hormone+linking+adipose+tissue+to+systemic+metabolism.">Identification of a lipokine, a lipid hormone linking adipose tissue to systemic metabolism.</a> Cell. 134, 933-944 (2008).</li><li>Claypool, S. M., Oktay, Y., Boontheung, P., Loo, J. A., Koehler, C. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cardiolipin+defines+the+interactome+of+the+major+ADP/ATP+carrier+protein+of+the+mitochondrial+inner+membrane.">Cardiolipin defines the interactome of the major ADP/ATP carrier protein of the mitochondrial inner membrane.</a> J. Cell Biol. 182, 937-950 (2008).</li><li>Guo, T., Gregg, C., Boukh-Viner, T., Kyryakov, P., Goldberg, A., Bourque, S., Banu, F., Haile, S., Milijevic, S., San, K. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+signal+from+inside+the+peroxisome+initiates+its+division+by+promoting+the+remodeling+of+the+peroxisomal+membrane.">A signal from inside the peroxisome initiates its division by promoting the remodeling of the peroxisomal membrane.</a> J. Cell Biol. 177, 289-303 (2007).</li><li>Russell, S. J., Kahn, C. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endocrine+regulation+of+ageing.">Endocrine regulation of ageing.</a> Nat. Rev. Mol. Cell Biol. 8, 681-691 (2007).</li><li>Czabany, T., Athenstaedt, K., Daum, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis,+storage+and+degradation+of+neutral+lipids+in+yeast.">Synthesis, storage and degradation of neutral lipids in yeast.</a> Biochim. Biophys. Acta. 1771, 299-309 (2007).</li><li>Br&amp;uuml, g. g. e. r., Erben, B., Sandhoff, G., Wieland, R., &amp;amp, F. T., Lehmann, W. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+analysis+of+biological+membrane+lipids+at+the+low+picomole+level+by+nano-electrospray+ionization+tandem+mass+spectroscopy.">Quantitative analysis of biological membrane lipids at the low picomole level by nano-electrospray ionization tandem mass spectroscopy.</a> Proc. Natl. Acad. Sci. USA. 94, 2339-2344 (1997).</li><li>Schneiter, R., Br&#252;gger, B., Sandhoff, R., Zellnig, G., Leber, A., Lampl, M., Athenstaedt, K., Hrastnik, C., Eder, S., Daum, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrospray+ionization+tandem+mass+spectrometry+(ESI-MS/MS)+analysis+of+the+lipid+molecular+species+composition+of+yeast+subcellular+membranes+reveals+acyl+chain-based+sorting/remodeling+of+distinct+molecular+species+en+route+to+the+plasma+membrane.">Electrospray ionization tandem mass spectrometry (ESI-MS/MS) analysis of the lipid molecular species composition of yeast subcellular membranes reveals acyl chain-based sorting/remodeling of distinct molecular species en route to the plasma membrane.</a> J. Cell Biol. 146, 741-754 (1999).</li><li>Bligh, E. G., Dyer, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+rapid+method+of+total+lipid+extraction+and+purification.">A rapid method of total lipid extraction and purification.</a> Can. J. Biochem. Physiol. 37, 911-917 (1959).</li></ol>

هذا الأسلوب يتيح تقييم سريع الكمي للlipidome باستخدام الخميرة متاحة بسهولة ، ومواد غير مكلفة. الأسلوب يسمح تحديد معظم أنواع الدهون الموجودة في خلايا الخميرة باستثناء diacylglycerols ، واسترات ergosterols ergosteryl ، وإن كان يمكن تحديد هذه الدهون عن طريق استبدال هيدروكسيد الأمونيوم مع ه...

a quantitative assessment of the yeast lipidome using electrospray ionization mass spectrometry

الدهون هي واحدة من الفئات الكبرى من الجزيئات الحيوية والديناميكية أدوارا الغشاء ، وتخزين الطاقة ، والإشارات<sup&gt; 1-4</sup&gt;. الخميرة في مهدها<em&gt; السكيراء الجعوية</em&gt; وراثيا وكيميائيا حقيقي النواة وحيدة الخلية تلاعب مع الجينوم المشروح وlipidome بسيط جدا ، هو نموذج لدراسة قيمة الوظائف البيولوجية للأنواع الدهون المختلفة في حقيقيات النوى متعددة الخلايا<sup&gt; 2،3،5</sup&gt;.<em&gt; س. خميرة</em&gt; لديه 10 فئات رئيسية من الدهون مع أطوال سلسلة من ذرات الكربون اساسا 16 أو 18 وإما صفر أو واحد من درجة التشبع<sup&gt; 6،7</sup&gt;. وراسخة ولكن حساسية منخفضة ، منفصلة كاف أشكال مختلفة من الدهون الجزيئية ، تتطلب derivitization الدهون السابقة -- الأساليب القائمة لتحديد وتقدير الدهن -- مثل ارتفاع الأداء اللوني السائل ، اللوني رقيقة الطبقة ، المجهري مضان ، واللوني للغاز تليها MS للتحليل ، أو يمكن أن تستهلك الوقت تماما. هنا نقدم وصفا مفصلا لنهجنا التجريبية لحل هذه القيود المتأصلة باستخدام المسح المسح ESI / MS لتحديد النوعي والكمي لتكملة كاملة من الدهون في خلايا الخميرة. وصف الأسلوب لا يتطلب الفصل الكروماتوغرافي مخاليط معقدة الدهون المستخرجة من خلايا الخميرة ، وبالتالي تسارع إلى حد كبير عملية جمع البيانات. هذا الأسلوب يتيح تحديد وتقدير الدهون في تركيزات منخفضة بقدر مل / غ وأنها طبقت بنجاح لتقييم lipidomes من خلايا الخميرة كلها وعلى تنقية العضيات. استخراج الدهون من خلايا الخميرة كلها لاستخدام هذا الأسلوب من تحليل الدهون تستغرق ساعتين الى ثلاث ساعات. يستغرق سوى خمس إلى عشر دقائق لتشغيل كل عينة من الدهون المستخرجة ويجفف على مطياف الكتلة Q - TOF مجهزة مصدر نانو electrospray.

Watch this Scientific Journal Video about A Quantitative Assessment of The Yeast Lipidome using Electrospray Ionization Mass Spectrometry at JoVE.com

A Quantitative Assessment of The Yeast Lipidome using Electrospray Ionization Mass Spectrometry

نحن تصف طريقة جديدة lipidomics كمي لتحديد الأنواع الدهنية عديدة في الخميرة باستخدام المسح المسح الشامل التأين مطياف electrospray (ESI / MS). هذا الأسلوب يتجاوز حاليا الأساليب المتاحة لتحديد وتقدير الدهون في القدرة على حل مختلف أشكال الجزيئية من الدهون ، والحساسية ، والسرعة.

والتقييم الكمي لاستخدام الطيف Lipidome الخميرة Electrospray قداس التأين

Lipids are one of the major classes of biomolecules and play important roles membrane dynamics, energy storage, and signalling1-4. The budding yeast ...

a-quantitative-assessment-yeast-lipidome-using-electrospray

Research

JoVE Journal

Biology

11.6K Views.  Concordia University. نحن تصف طريقة جديدة lipidomics كمي لتحديد الأنواع الدهنية عديدة في الخميرة باستخدام المسح المسح الشامل التأين مطياف electrospray (ESI / MS). هذا الأسلوب يتجاوز حاليا الأساليب المتاحة لتحديد وتقدير الدهون في القدرة على حل مختلف أشكال الجزيئية من الدهون ، والحساسية ، والسرعة.

Video: A Quantitative Assessment of The Yeast Lipidome using Electrospray Ionization Mass Spectrometry

MALDI Sample Preparation: the Ultra Thin Layer Method

This video demonstrates the preparation of an ultra-thin matrix/analyte layer for analyzing peptides and proteins by Matrix-Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS) 1,2. The ultra-thin layer method involves the production of a substrate layer of matrix crystals (alpha-cyano-4-hydroxycinnamic acid) on the sample plate, which serves as a seeding ground for subsequent crystallization of a matrix/analyte mixture. Advantages of the ultra-thin layer method over other sample deposition approaches (e.g. dried droplet) are that it provides (i) greater tolerance to impurities such as salts and detergents, (ii) better resolution, and (iii) higher spatial uniformity. This method is especially useful for the accurate mass determination of proteins. The protocol was initially developed and optimized for the analysis of membrane proteins and used to successfully analyze ion channels, metabolite transporters, and receptors, containing between 2 and 12 transmembrane domains 2. Since the original publication, it has also shown to be equally useful for the analysis of soluble proteins. Indeed, we have used it for a large number of proteins having a wide range of properties, including those with molecular masses as high as 380 kDa 3. It is currently our method of choice for the molecular mass analysis of all proteins. The described procedure consistently produces high-quality spectra, and it is sensitive, robust, and easy to implement.

This video demonstrates the preparation of an ultra-thin matrix/analyte layer for analyzing peptides and proteins by Matrix-Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS).

MALDI تحضير العينة : الترا أسلوب طبقة رقيقة

This video demonstrates the preparation of an ultra-thin matrix/analyte layer for analyzing peptides and proteins by Matrix-Assisted Laser Desorption ...

Quantification of Proteins Using Peptide Immunoaffinity Enrichment Coupled with Mass Spectrometry

There is a great need for quantitative assays in measuring proteins. Traditional sandwich immunoassays, largely considered the gold standard in quantitation, are associated with a high cost, long lead time, and are fraught with drawbacks (e.g. heterophilic antibodies, autoantibody interference, 'hook-effect').1 An alternative technique is affinity enrichment of peptides coupled with quantitative mass spectrometry, commonly referred to as SISCAPA (Stable Isotope Standards and Capture by Anti-Peptide Antibodies).2 In this technique, affinity enrichment of peptides with stable isotope dilution and detection by selected/multiple reaction monitoring mass spectrometry (SRM/MRM-MS) provides quantitative measurement of peptides as surrogates for their respective proteins. SRM/MRM-MS is well established for accurate quantitation of small molecules 3, 4 and more recently has been adapted to measure the concentrations of proteins in plasma and cell lysates.5-7 To achieve quantitation of proteins, these larger molecules are digested to component peptides using an enzyme such as trypsin. One or more selected peptides whose sequence is unique to the target protein in that species (i.e. "proteotypic" peptides) are then enriched from the sample using anti-peptide antibodies and measured as quantitative stoichiometric surrogates for protein concentration in the sample. Hence, coupled to stable isotope dilution (SID) methods (i.e. a spiked-in stable isotope labeled peptide standard), SRM/MRM can be used to measure concentrations of proteotypic peptides as surrogates for quantification of proteins in complex biological matrices. The assays have several advantages compared to traditional immunoassays. The reagents are relatively less expensive to generate, the specificity for the analyte is excellent, the assays can be highly multiplexed, enrichment can be performed from neat plasma (no depletion required), and the technique is amenable to a wide array of proteins or modifications of interest.8-13 In this video we demonstrate the basic protocol as adapted to a magnetic bead platform.

Stable Isotope Standards and Capture by Anti-Peptide Antibodies (SISCAPA) couples affinity enrichment of peptides with stable isotope dilution mass spectrometry (MRM-MS) to provide quantitative measurement of peptides as surrogates for their respective proteins. Here we describe the protocol using magnetic particles in a partially automated format.

الكمي من البروتينات عن طريق التخصيب الببتيد Immunoaffinity اقترن الطيف الكتلي

There is a great need for quantitative assays in measuring proteins. Traditional sandwich immunoassays, largely considered the gold standard in ...

Quantitative Live Cell Fluorescence-microscopy Analysis of Fission Yeast

Several microscopy techniques are available today that can detect a specific protein within the cell. During the last decade live cell imaging using fluorochromes like Green Fluorescent Protein (GFP) directly attached to the protein of interest has become increasingly popular 1. Using GFP and similar fluorochromes the subcellular localisations and movements of proteins can be detected in a fluorescent microscope. Moreover, also the subnuclear localisation of a certain region of a chromosome can be studied using this technique. GFP is fused to the Lac Repressor protein (LacR) and ectopically expressed in the cell where tandem repeats of the lacO sequence has been inserted into the region of interest on the chromosome2. The LacR-GFP will bind to the lacO repeats and that area of the genome will be visible as a green dot in the fluorescence microscope. Yeast is especially suited for this type of manipulation since homologous recombination is very efficient and thereby enables targeted integration of the lacO repeats and engineered fusion proteins with GFP 3. Here we describe a quantitative method for live cell analysis of fission yeast. Additional protocols for live cell analysis of fission yeast can be found, for example on how to make a movie of the meiotic chromosomal behaviour 4. In this particular experiment we focus on subnuclear organisation and how it is affected during gene induction. We have labelled a gene cluster, named Chr1, by the introduction of lacO binding sites in the vicinity of the genes. The gene cluster is enriched for genes that are induced early during nitrogen starvation of fission yeast 5. In the strain the nuclear membrane (NM) is labelled by the attachment of mCherry to the NM protein Cut11 giving rise to a red fluorescent signal. The Spindle Pole body (SPB) compound Sid4 is fused to Red Fluorescent Protein (Sid4-mRFP) 6. In vegetatively growing yeast cells the centromeres are always attached to the SPB that is embedded in the NM 7. The SPB is identified as a large round structure in the NM. By imaging before and 20 minutes after depletion of the nitrogen source we can determine the distance between the gene cluster (GFP) and the NM/SPB. The mean or median distances before and after nitrogen depletion are compared and we can thus quantify whether or not there is a shift in subcellular localisation of the gene cluster after nitrogen depletion.

The fission yeast, Schizosaccharomyces pombe, is a good model system to study basic cellular processes. Here we describe a method to perform quantitative live cell analysis of fission yeast. In this particular experiment we focus on organisation of the genome within the cell nucleus, but the method can also be used to study cytosolic factors.

الكمية خلية حية الإسفار - المجهري تحليل الخميرة الانشطار

Several microscopy techniques are available today that can detect a specific protein within the cell. During the last decade live cell imaging using ...

Amide Hydrogen/Deuterium Exchange &amp; MALDI-TOF Mass Spectrometry Analysis of Pak2 Activation

Amide hydrogen/deuterium exchange (H/D exchange) coupled with mass spectrometry has been widely used to analyze the interface of protein-protein interactions, protein conformational changes, protein dynamics and protein-ligand interactions. H/D exchange on the backbone amide positions has been utilized to measure the deuteration rates of the micro-regions in a protein by mass spectrometry1,2,3. The resolution of this method depends on pepsin digestion of the deuterated protein of interest into peptides that normally range from 3-20 residues. Although the resolution of H/D exchange measured by mass spectrometry is lower than the single residue resolution measured by the Heteronuclear Single Quantum Coherence (HSQC) method of NMR, the mass spectrometry measurement in H/D exchange is not restricted by the size of the protein4. H/D exchange is carried out in an aqueous solution which maintains protein conformation. We provide a method that utilizes the MALDI-TOF for detection2, instead of a HPLC/ESI (electrospray ionization)-MS system5,6. The MALDI-TOF provides accurate mass intensity data for the peptides of the digested protein, in this case protein kinase Pak2 (also called &gamma;-Pak). Proteolysis of Pak 2 is carried out in an offline pepsin digestion. This alternative method, when the user does not have access to a HPLC and pepsin column connected to mass spectrometry, or when the pepsin column on HPLC does not result in an optimal digestion map, for example, the heavily disulfide-bonded secreted Phospholipase A2 (sPLA2). Utilizing this method, we successfully monitored changes in the deuteration level during activation of Pak2 by caspase 3 cleavage and autophosphorylation7,8,9.

MALDI-TOF mass spectrometry was successfully utilized to monitor the amide hydrogen/deuterium exchange in protein kinase Pak2 activation.

أميد الهيدروجينية / الديتريوم الطيف الكتلي تبادل و- TOF MALDI تحليل Pak2 التنشيط

Amide hydrogen/deuterium exchange (H/D exchange) coupled with mass spectrometry has been widely used to analyze the interface of protein-protein ...

Profiling Thiol Redox Proteome Using Isotope Tagging Mass Spectrometry

Pseudomonas syringae pv. tomato strain DC3000 not only causes bacterial speck disease in Solanum lycopersicum but also on Brassica species, as well as on Arabidopsis thaliana, a genetically tractable host plant1,2. The accumulation of reactive oxygen species (ROS) in cotyledons inoculated with DC3000 indicates a role of ROS in modulating necrotic cell death during bacterial speck disease of tomato3. Hydrogen peroxide, a component of ROS, is produced after inoculation of tomato plants with Pseudomonas3. Hydrogen peroxide can be detected using a histochemical stain 3'-3' diaminobenzidine (DAB)4. DAB staining reacts with hydrogen peroxide to produce a brown stain on the leaf tissue4. ROS has a regulatory role of the cellular redox environment, which can change the redox status of certain proteins5. Cysteine is an important amino acid sensitive to redox changes. Under mild oxidation, reversible oxidation of cysteine sulfhydryl groups serves as redox sensors and signal transducers that regulate a variety of physiological processes6,7. Tandem mass tag (TMT) reagents enable concurrent identification and multiplexed quantitation of proteins in different samples using tandem mass spectrometry8,9. The cysteine-reactive TMT (cysTMT) reagents enable selective labeling and relative quantitation of cysteine-containing peptides from up to six biological samples. Each isobaric cysTMT tag has the same nominal parent mass and is composed of a sulfhydryl-reactive group, a MS-neutral spacer arm and an MS/MS reporter10. After labeling, the samples were subject to protease digestion. The cysteine-labeled peptides were enriched using a resin containing anti-TMT antibody. During MS/MS analysis, a series of reporter ions (i.e., 126-131 Da) emerge in the low mass region, providing information on relative quantitation. The workflow is effective for reducing sample complexity, improving dynamic range and studying cysteine modifications. Here we present redox proteomic analysis of the Pst DC3000 treated tomato (Rio Grande) leaves using cysTMT technology. This high-throughput method has the potential to be applied to studying other redox-regulated physiological processes.

Reactive oxygen species level is elevated when cells encounter stress conditions. Here we show the example of 3'-3' diaminobenzidine staining as well as cysTMT labeling and mass spectrometry to profile the redox proteome in Pseudomonas syringae treated tomato leaves.

التنميط بروتيوم الأكسدة والاختزال ثيول استخدام الطيف النظائر كتلة توصيف

Pseudomonas syringae pv. tomato strain DC3000 not only causes bacterial speck disease in Solanum lycopersicum but also on Brassica species, as well as on ...

A Protocol for the Identification of Protein-protein Interactions Based on 15N Metabolic Labeling, Immunoprecipitation, Quantitative Mass Spectrometry and Affinity Modulation

Protein-protein interactions are fundamental for many biological processes in the cell. Therefore, their characterization plays an important role in current research and a plethora of methods for their investigation is available1. Protein-protein interactions often are highly dynamic and may depend on subcellular localization, post-translational modifications and the local protein environment2. Therefore, they should be investigated in their natural environment, for which co-immunoprecipitation approaches are the method of choice3. Co-precipitated interaction partners are identified either by immunoblotting in a targeted approach, or by mass spectrometry (LC-MS/MS) in an untargeted way. The latter strategy often is adversely affected by a large number of false positive discoveries, mainly derived from the high sensitivity of modern mass spectrometers that confidently detect traces of unspecifically precipitating proteins. A recent approach to overcome this problem is based on the idea that reduced amounts of specific interaction partners will co-precipitate with a given target protein whose cellular concentration is reduced by RNAi, while the amounts of unspecifically precipitating proteins should be unaffected. This approach, termed QUICK for QUantitative Immunoprecipitation Combined with Knockdown4, employs Stable Isotope Labeling of Amino acids in Cell culture (SILAC)5 and MS to quantify the amounts of proteins immunoprecipitated from wild-type and knock-down strains. Proteins found in a 1:1 ratio can be considered as contaminants, those enriched in precipitates from the wild type as specific interaction partners of the target protein. Although innovative, QUICK bears some limitations: first, SILAC is cost-intensive and limited to organisms that ideally are auxotrophic for arginine and/or lysine. Moreover, when heavy arginine is fed, arginine-to-proline interconversion results in additional mass shifts for each proline in a peptide and slightly dilutes heavy with light arginine, which makes quantification more tedious and less accurate5,6. Second, QUICK requires that antibodies are titrated such that they do not become saturated with target protein in extracts from knock-down mutants.
Here we introduce a modified QUICK protocol which overcomes the abovementioned limitations of QUICK by replacing SILAC for 15N metabolic labeling and by replacing RNAi-mediated knock-down for affinity modulation of protein-protein interactions. We demonstrate the applicability of this protocol using the unicellular green alga Chlamydomonas reinhardtii as model organism and the chloroplast HSP70B chaperone as target protein7 (Figure 1). HSP70s are known to interact with specific co-chaperones and substrates only in the ADP state8. We exploit this property as a means to verify the specific interaction of HSP70B with its nucleotide exchange factor CGE19.

A Protocol for the Identification of Protein-protein Interactions Based on 15N Metabolic Labeling, Immunoprecipitation, Quantitative Mass Spectrometry and Affinity Modulation

We present a variation of the QUICK (QUantitative Immunoprecipitation Combined with Knockdown) approach that was introduced previously to distinguish between true and false protein-protein interactions. Our approach is based on 15N metabolic labeling, the modulation of affinities of protein-protein interactions by the presence/absence of ATP, immunoprecipitation, and quantitative mass spectrometry.

بروتوكول لتحديد البروتين البروتين التفاعلات على أساس<sup&gt; 15</sup&gt; N صفها الأيض، مناعي، الكمي والتحوير الطيف الكتلي الانجذاب

Protein-protein interactions are fundamental for many biological processes in the cell. Therefore, their characterization plays an important role in ...

A New Approach for the Comparative Analysis of Multiprotein Complexes Based on 15N Metabolic Labeling and Quantitative Mass Spectrometry

The introduced protocol provides a tool for the analysis of multiprotein complexes in the thylakoid membrane, by revealing insights into complex composition under different conditions. In this protocol the approach is demonstrated by comparing the composition of the protein complex responsible for cyclic electron flow (CEF) in Chlamydomonas reinhardtii, isolated from genetically different strains. The procedure comprises the isolation of thylakoid membranes, followed by their separation into multiprotein complexes by sucrose density gradient centrifugation, SDS-PAGE, immunodetection and comparative, quantitative mass spectrometry (MS) based on differential metabolic labeling (14N/15N) of the analyzed strains. Detergent solubilized thylakoid membranes are loaded on sucrose density gradients at equal chlorophyll concentration. After ultracentrifugation, the gradients are separated into fractions, which are analyzed by mass-spectrometry based on equal volume. This approach allows the investigation of the composition within the gradient fractions and moreover to analyze the migration behavior of different proteins, especially focusing on ANR1, CAS, and PGRL1. Furthermore, this method is demonstrated by confirming the results with immunoblotting and additionally by supporting the findings from previous studies (the identification and PSI-dependent migration of proteins that were previously described to be part of the CEF-supercomplex such as PGRL1, FNR, and cyt f). Notably, this approach is applicable to address a broad range of questions for which this protocol can be adopted and e.g. used for comparative analyses of multiprotein complex composition isolated from distinct environmental conditions.

A New Approach for the Comparative Analysis of Multiprotein Complexes Based on 15N Metabolic Labeling and Quantitative Mass Spectrometry

The described comparative, quantitative proteomic approach aims at obtaining insights into the composition of multiprotein complexes&#160;under different conditions and is demonstrated by comparing genetically different strains. For quantitative analysis equal volumes of different fractions from a sucrose density gradient are mixed and analyzed by mass spectrometry.

نهج جديد لتحليل مقارن لMultiprotein مجمعات بناء على<sup&gt; 15</sup&gt; N الأيض وصفها والكمية الطيف الكتلي

The introduced protocol provides a tool for the analysis of multiprotein complexes in the thylakoid membrane, by revealing insights into complex ...

Capture Compound Mass Spectrometry - A Powerful Tool to Identify Novel c-di-GMP Effector Proteins

Considerable progress has been made during the last decade towards the identification and characterization of enzymes involved in the synthesis (diguanylate cyclases) and degradation (phosphodiesterases) of the second messenger c-di-GMP. In contrast, little information is available regarding the molecular mechanisms and cellular components through which this signaling molecule regulates a diverse range of cellular processes. Most of the known effector proteins belong to the PilZ family or are degenerated diguanylate cyclases or phosphodiesterases that have given up on catalysis and have adopted effector function. Thus, to better define the cellular c-di-GMP network in a wide range of bacteria experimental methods are required to identify and validate novel effectors for which reliable in silico predictions fail.
We have recently developed a novel Capture Compound Mass Spectrometry (CCMS) based technology as a powerful tool to biochemically identify and characterize c-di-GMP binding proteins. This technique has previously been reported to be applicable to a wide range of organisms1. Here we give a detailed description of the protocol that we utilize to probe such signaling components. As an example, we use Pseudomonas aeruginosa, an opportunistic pathogen in which c-di-GMP plays a critical role in virulence and biofilm control. CCMS identified 74% (38/51) of the known or predicted components of the c-di-GMP network. This study explains the CCMS procedure in detail, and establishes it as a powerful and versatile tool to identify novel components involved in small molecule signaling.

The ubiquitous second messenger c-di-GMP controls growth and behavior of many bacteria. We have developed a novel Capture Compound Mass Spectrometry based technology to biochemically identify and characterize c-di-GMP binding proteins in virtually any bacterial species.

التقاط الطيف الكتلي - أداة قوية لتحديد رواية ج-دي-GMP المستجيب البروتينات

Considerable progress has been made during the last decade towards the identification and characterization of enzymes involved in the synthesis ...

Using Microfluidic Devices to Measure Lifespan and Cellular Phenotypes in Single Budding Yeast Cells

Budding yeast Saccharomyces cerevisiae is an important model organism in aging research. Genetic studies have revealed many genes with conserved effects on the lifespan across species. However, the molecular causes of aging and death remain elusive. To gain a systematic understanding of the molecular mechanisms underlying yeast aging, we need high-throughput methods to measure lifespan and to quantify various cellular and molecular phenotypes in single cells. Previously, we developed microfluidic devices to track budding yeast mother cells throughout their lifespan while flushing away newborn daughter cells. This article presents a method for preparing microfluidic chips and for setting up microfluidic experiments. Multiple channels can be used to simultaneously track cells under different conditions or from different yeast strains. A typical setup can track hundreds of cells per channel and allow for high-resolution microscope imaging throughout the lifespan of the cells. Our method also allows detailed characterization of the lifespan, molecular markers, cell morphology, and the cell cycle dynamics of single cells. In addition, our microfluidic device is able to trap a significant amount of fresh mother cells that can be identified by downstream image analysis, making it possible to measure the lifespan with higher accuracy.

This article presents a protocol optimized for the production of microfluidic chips and the setup of microfluidic experiments to measure the lifespan and cellular phenotypes of single yeast cells.

استخدام أجهزة ميكروفلويديك لقياس عمر والخلوية الظواهر في خلايا الخميرة في مهدها واحدة

Budding yeast Saccharomyces cerevisiae is an important model organism in aging research. Genetic studies have revealed many genes with conserved effects ...

Sample Preparation for Mass-spectrometry-based Proteomics Analysis of Ocular Microvessels

The use of isolated ocular blood vessels in vitro to decipher the pathophysiological state of the eye using advanced technological approaches has greatly expanded our understanding of certain diseases. Mass spectrometry (MS)-based proteomics has emerged as a powerful tool to unravel alterations in the molecular mechanisms and protein signaling pathways in the vascular beds in health and disease. However, sample preparation steps prior to MS analyses are crucial to obtain reproducible results and in-depth elucidation of the complex proteome. This is particularly important for preparation of ocular microvessels, where the amount of sample available for analyses is often limited and thus, poses a challenge for optimum protein extraction. This article endeavors to provide an efficient, rapid and robust protocol for sample preparation from an exemplary retrobulbar ocular vascular bed employing the porcine short posterior ciliary arteries. The present method focuses on protein extraction procedures from both the supernatant and pellet of the sample following homogenization, sample cleaning with centrifugal filter devices prior to one-dimensional gel electrophoresis and peptide purification steps for label-free quantification in a liquid chromatography-electrospray ionization-linear ion trap-Orbitrap MS system. Although this method has been developed specifically for proteomics analyses of ocular microvessels, we have also provided convincing evidence that it can also be readily employed for other tissue-based samples.

Proteome characterization of ocular microvascular beds is pivotal for in-depth understanding of many ocular pathologies in humans. This study demonstrates an effective, rapid, and robust method for protein extraction and sample preparation from small blood vessels employing the porcine short posterior ciliary arteries as model vessels for mass-spectrometry-based proteomics analyses.

إعداد نموذج للإعلام-قياس الطيف الكتلي المستندة البروتيوميات تحليل ميكروفيسيلس العين

The use of isolated ocular blood vessels in vitro to decipher the pathophysiological state of the eye using advanced technological approaches has greatly ...