1对N，N&#39;的合成1 - （烷-1，N-二基）diisonicotinamide <ol><li>干燥烘箱中（100℃，1小时）一个单颈或三颈圆底烧瓶中，以确保除去所有水分。 </li><li>添加固体异烟酸，或其衍生物，以连同磁力搅拌棒的烧瓶中。如果二氨基配体（S）的固体在室温下，然后0.5摩尔（以异烟酸的摩尔数）加入到烧瓶中，在这个阶段。 </li><li>帽用橡胶隔片烧瓶的颈部（次），要么通过连续的氮气流中或通过使用氮气填充的气球代替空气与氮气的烧瓶中。 </li><li>用皮下注射针和注射器添加无水二甲基甲酰胺或二甲亚砜（每500毫克异烟酸，2 - 甲基 - 异烟酸4毫升）以溶解固体。如果固体不容易溶解，然后轻轻加热溶液。 </li><li>新增7摩尔当量（以一安装三乙胺（弱碱）和二氨基烷烃0.5摩尔当量使用异烟酸）的。如果溶液是液体在室温下，再加入1.5摩尔当量。 </li><li>添加1 - 丙基膦酸酐（偶联剂）1摩尔当量在连续搅拌下，让反应完成超过5-12小时。 </li></ol>的配体的2。纯化<ol><li>对于双吡啶配体用二氨基配有10个以上亚甲基制成，等待产品从溶液中沉淀随着反应的进行。 </li><li>使用二氨基联吡啶配体的制造中，在约40毫升的水沉淀产物。 </li><li>使用五点五十八亚甲基基团的二氨基烷烃双吡啶制成，添加〜40毫升的水，并允许该化合物结晶过1-3天。 </li><li>通过真空过滤收集每个双吡啶配体及由约400-500毫升沸水重结晶，每200毫克配体。注：需要，因为它们大大减少水中的溶解度越长双吡啶配体更多的水。 </li><li>添加NaOH和KOH（pH为9）的溶液，以确保化合物是经重结晶游离碱。 </li></ol> 3，合成了双核铂配合物的纯化<ol><li>充分溶解反式 diamminodichloridoplatinum（II）中，transplatin，在热的（70-80℃）水（每200毫克transplatin 150毫升）中，以产生清晰的强黄色溶液。 </li><li>添加双吡啶配体的0.5摩尔当量和搅拌溶液在温度，直到配体溶解（透明溶液）。等待该溶液转接近无色，关火，并在室温下搅拌了几个额外小时。 </li><li>通过旋转蒸发除去溶剂，将得到黄色粉末。 </li><li>净化，铂络合物（ES）溶解在温水的最低金额（〜50＆＃186，C）。如果剩余的黄色或白色的固体都存在，然后过滤这些了。 </li><li>加丙酮至这似乎是金属配合物的聚合形式，并代表最多的反应产物的10％，直至白色沉淀物形成的溶液。继续加入丙酮（〜额外20-30毫升），直至没有更多的沉淀出现。注意：此白色沉淀物是杂质。 </li><li>通过尼龙滤纸（0.2微米孔径）和旋转剩余的溶液至干，将得到的纯品的蒸发过滤的内容中移除该沉淀物。注：如有必要，可直到复杂的是纯粹的进行再额外丙酮沉淀步骤。 </li></ol>

<ol>
	<li>Wheate, N. J., Walker, S., Craig, G. E., Oun, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+status+of+platinum+anticancer+drugs+in+the+clinic+and+in+clinical+trials.">The status of platinum anticancer drugs in the clinic and in clinical trials.</a> Dalton Trans. 39, 8113-8127 (2010).</li><li>Kiernan, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+pain+with+platinum:+oxaliplatin+and+neuropathy.">The pain with platinum: oxaliplatin and neuropathy.</a> Eur. J. Cancer. 43, 2631-2633 (2007).</li><li>Markman, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+features+of+hypersensitivity+reactions+to+carboplatin.">Clinical features of hypersensitivity reactions to carboplatin.</a> J Clin. Oncol. 17, 1141-1145 (1999).</li><li>Ding, D., Allman, B. L., Salvi, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Review:+Ototoxic+characteristics+of+platinum+antitumor+drugs.">Review: Ototoxic characteristics of platinum antitumor drugs.</a> Anatomical Rec. 295, 1851-1867 (2012).</li><li>Galluzzi, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+mechanisms+of+cisplatin+resistance.">Molecular mechanisms of cisplatin resistance.</a> Oncogene. 31, 1869-1883 (2012).</li><li>Park, G. Y., Wilson, J. J., Song, Y., Lippard, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phenanthriplatin,+a+monofunctional+DNA-binding+platinum+anticancer+drug+candidate+with+unusual+potency+and+cellular+activity+profile.">Phenanthriplatin, a monofunctional DNA-binding platinum anticancer drug candidate with unusual potency and cellular activity profile.</a> Proc. Natl. Acad. Sci. USA. 109, 11987-11992 (2012).</li><li>Moghaddas, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=next+generation+platinum+antitumor+agents:+A+paradigm+shift+in+designing+and+defining+molecular+targets.">next generation platinum antitumor agents: A paradigm shift in designing and defining molecular targets.</a> Inorg. Chim. Acta. 393, 173-181 (2012).</li><li>Farrell, N. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Platinum+formulations+as+anticancer+drugs+clinical+and+pre-clinical+studies.">Platinum formulations as anticancer drugs clinical and pre-clinical studies.</a> Curr. Top. Med. Chem. 11, 2623-2631 (2011).</li><li>Wheate, N. J., Collins, J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multi-nuclear+platinum+complexes+as+anti-cancer+drugs.">Multi-nuclear platinum complexes as anti-cancer drugs.</a> Coord. Chem. Rev. 241, 133-145 (2003).</li><li>Gourley, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+phase+I+study+of+the+trinuclear+platinum+compound,+BBR3464,+in+combination+with+protracted+venous+infusional+5-fluorouracil+in+patients+with+advanced+cancer.">A phase I study of the trinuclear platinum compound, BBR3464, in combination with protracted venous infusional 5-fluorouracil in patients with advanced cancer.</a> Cancer Chemoth. Pharmacol. 53, 95-101 (2004).</li><li>Calvert, A. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phase+II+clinical+study+of+BBR3464,+a+novel,+bifunctional+platinum+analogue,+in+patients+with+advanced+ovarian+cancer.">Phase II clinical study of BBR3464, a novel, bifunctional platinum analogue, in patients with advanced ovarian cancer.</a> Eur. J. Cancer. 37, (2001).</li><li>Jodrell, D. I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phase+II+studies+with+BBR3464,+a+novel+tri-nuclear+platinum+complex,+in+patients+with+gastric+or+gastro-oesophageal+adenocarcinoma.">Phase II studies with BBR3464, a novel tri-nuclear platinum complex, in patients with gastric or gastro-oesophageal adenocarcinoma.</a> Eur. J. Cancer. 40, 1872-1877 (2004).</li><li>William, W. N., Glisson, B. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Novel+strategies+for+the+treatment+of+small-cell+lung+carcinoma.">Novel strategies for the treatment of small-cell lung carcinoma.</a> Nat. Rev. Clin. Oncol. 8, 611-619 (2011).</li><li>Raynaud, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=cis-Amminedichloro(2-methylpyridine)+Platinum(II)+(AMD473),+a+novel+sterically+hindered+platinum+complex:+In+vivo+activity,+toxicology,+and+pharmacokinetics+in+mice.">cis-Amminedichloro(2-methylpyridine) Platinum(II) (AMD473), a novel sterically hindered platinum complex: In vivo activity, toxicology, and pharmacokinetics in mice.</a> Clin. Cancer Res. 3, 2063-2074 (1997).</li><li>Holford, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=biochemical+and+pharmacological+activity+of+the+novel+sterically+hindered+platinum+co-ordination+complex+cis-[amminedichloro(2-methylpyridine)]+platinum(II)+(AMD473).">biochemical and pharmacological activity of the novel sterically hindered platinum co-ordination complex cis-[amminedichloro(2-methylpyridine)] platinum(II) (AMD473).</a> Anti-Cancer Drug Des. 13, 1-18 (1998).</li><li>Munk, V. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Investigations+into+the+interactions+between+DNA+and+conformationally+constrained+pyridylamine+platinum(II)+analogues+of+AMD473.">Investigations into the interactions between DNA and conformationally constrained pyridylamine platinum(II) analogues of AMD473.</a> Inorg. Chem. 42, 3582-3590 (2003).</li><li>Wheate, N. J., Collins, J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multi-nuclear+platinum+drugs:+A+new+paradigm+in+chemotherapy.">Multi-nuclear platinum drugs: A new paradigm in chemotherapy.</a> Curr. Med. Chem. - Anti-Cancer Agents. 5, 267-279 (2005).</li><li>Beale, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+phase+I+clinical+and+pharmacological+study+of+cis-diamminedichloro(2-methylpyridine)+platinumm+II+(AMD473).">A phase I clinical and pharmacological study of cis-diamminedichloro(2-methylpyridine) platinumm II (AMD473).</a> British journal of cancer. 88, 1128-1134 (2003).</li><li>Sessa, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+and+pharmacological+phase+I+study+with+accelerated+titration+design+of+a+daily+times+five+schedule+of+BBR3464,+a+novel+cationic+triplatinum+complex.">Clinical and pharmacological phase I study with accelerated titration design of a daily times five schedule of BBR3464, a novel cationic triplatinum complex.</a> Ann. Oncol. 11, 977-983 (2000).</li><li>Brown, S. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combining+aspects+of+the+platinum+anticancer+drugs+picoplatin+and+BBR3464+to+synthesize+a+new+family+of+sterically+hindered+dinuclear+complexes;+their+synthesis,+binding+kinetics+and+cytotoxicity.">Combining aspects of the platinum anticancer drugs picoplatin and BBR3464 to synthesize a new family of sterically hindered dinuclear complexes; their synthesis, binding kinetics and cytotoxicity.</a> Dalton Trans. 41, 11330-11339 (2012).</li><li>Still, B. M., Anil Kumar, P. G., Aldrich-Wright, J. R., Price, W. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=195Pt+NMR+-+Theory+and+application.">195Pt NMR - Theory and application.</a> Chem. Soc. Rev. 36, 665-686 (2007).</li><li>Wheate, N. J., Cullinane, C., Webster, L. K., Collins, J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis,+cytotoxicity,+cell+uptake+and+DNA+interstrand+cross-linking+of+4,4'-dipyrazolylmethane-linked+multinuclear+platinum+anti-cancer+complexes.">Synthesis, cytotoxicity, cell uptake and DNA interstrand cross-linking of 4,4'-dipyrazolylmethane-linked multinuclear platinum anti-cancer complexes.</a> Anti-Cancer Drug Des. 16, 91-98 (2001).</li></ol>

作者什么都没有透露。

在此工作的双核铂络合物合成了作为潜在的抗癌药物。这样做是通过使用异烟酸和可变长度的二氨基烷烃酰胺偶联反应合成的双吡啶桥连配体。先前的双吡啶配体和其甲基类似物具有2至8个亚甲基基团和它们各自的铂配合物的合成已有报道。在本文中，合成和纯化方法已修订，使其更快，更便宜，已经证明了这一点通过合成双吡啶配体与8，10和12的亚甲基（最短与八亚甲基，彪，被做了比较新的纯...

铂抗癌药物残留的药物在人类癌症的治疗1最广泛使用的家庭中的一个。尽管取得了成功，它们在各自的应用程序有严重的剂量限制性副作用2-4限制。有限的剂量可给予患者也意味着肿瘤可产生耐药性5。因此，新的药物不断被开发以改善的副作用特性和克服获得性抗性，如phenanthriplatin 6和phosphaplatin 7。 20世纪90年代后期，三核铂类药物的开发，BBR3464（ 方案1）8，比领先的铂类药物，顺铂在体外高达1000倍以上的细胞毒性。 BBR3464也能够克服获得抗性的人类肿瘤细胞株9的面板。不幸的是，BBR3464的活性增加匹配由50 - 100 - 倍的毒性，这限制了它的使用10-12。它也易于降解在体内，这意味着该药物很少到达肿瘤细胞核完好9。 吡铂是一种单核铂为基础的药物，其中包含2 -甲基-吡啶配体（ 方案1）13。这种药物的甲基保护它免受攻击生物亲核试剂;特别是半胱氨酸和含有肽/蛋白质14-16蛋氨酸。因此，该药物是相当稳定的，并具有高得多的浓度与两个BBR3464，顺铂17相比到达癌的细胞核。它的反应性降低也意味着吡具有较高的最大耐受剂量与BBR3464，顺铂10,18,19比较。 因此，该项目旨在结合BBR3464和吡铂的属性，以产生新的药物，是能够克服的获得性耐药的显示改进的生物稳定性和不太严重的副作用EFFE仙（ 例如 ， 图1）。在这样做时，制备了双吡啶桥联配体20的范围内的双核铂络合物。的配位体使用的酰胺偶联反应，用异烟酸，或如2 - 甲基 - 异烟酸，可变长度的二氨基烷烃及其衍生物制成。的配位体的1摩尔当量与transplatin的2摩尔当量反应得到所需的铂络合物（ 方案1）。

<table border="0" cellpadding="0" cellspacing="0" width="782">
	<tbody>
		<tr height="24">
			<td height="24" style="height:24px;width:297px;">D2O</td>
			<td style="width:175px;">Aldrich</td>
			<td align="right" style="width:159px;">151882</td>
			<td style="width:152px;">99.9% D</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:297px;">DMSO-d6</td>
			<td style="width:175px;">Aldrich</td>
			<td align="right" style="width:159px;">156914</td>
			<td style="width:152px;">99.96% D</td>
		</tr>
		<tr height="60">
			<td height="60" style="height:60px;width:297px;">1,8-diaminooctane</td>
			<td style="width:175px;">Aldrich</td>
			<td style="width:159px;">D22401</td>
			<td align="right" style="width:152px;">98%</td>
		</tr>
		<tr height="60">
			<td height="60" style="height:60px;width:297px;">1,10-diaminodecane</td>
			<td style="width:175px;">Aldrich</td>
			<td style="width:159px;">D14204</td>
			<td align="right" style="width:152px;">98%</td>
		</tr>
		<tr height="80">
			<td height="80" style="height:80px;width:297px;">1,12-diaminododecane</td>
			<td style="width:175px;">Aldrich</td>
			<td style="width:159px;">D1,640-1</td>
			<td align="right" style="width:152px;">98%</td>
		</tr>
		<tr height="40">
			<td height="40" style="height:40px;width:297px;">Isonicotinic acid</td>
			<td style="width:175px;">Aldrich</td>
			<td style="width:159px;">I17508</td>
			<td align="right" style="width:152px;">99%</td>
		</tr>
		<tr height="120">
			<td height="120" style="height:120px;width:297px;">1-Propylphosphonic anhydride solution</td>
			<td style="width:175px;">Aldrich</td>
			<td align="right" style="width:159px;">431303</td>
			<td style="width:152px;">50 wt% in ethyl acetate</td>
		</tr>
		<tr height="100">
			<td height="100" style="height:100px;width:297px;">Trans-diaminodichloridoplatinum(II)</td>
			<td style="width:175px;">Aldrich</td>
			<td style="width:159px;">P1525</td>
			<td style="width:152px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Dimethylsulfoxide</td>
			<td style="width:175px;">Sigma-Aldrich</td>
			<td style="width:159px;">Z76855</td>
			<td style="width:152px;">&#62;99.9%, anhydrous</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">N,N&#8217;-dimethylformamide</td>
			<td style="width:175px;">Sigma-Aldrich</td>
			<td align="right" style="width:159px;">227056</td>
			<td style="width:152px;">99.8%, anhydrous</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Triethylamine</td>
			<td style="width:175px;">Sigma-Aldrich</td>
			<td style="width:159px;">T0886</td>
			<td style="width:152px;">&#62;99%</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Nylon filter membranes</td>
			<td style="width:175px;">Whatman</td>
			<td style="width:159px;">7402-004</td>
			<td style="width:152px;">Pore size, 0.2 &#181;m</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Equipment</td>
			<td style="width:175px;"></td>
			<td style="width:159px;"></td>
			<td style="width:152px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Magnetic stirring hotplate</td>
			<td style="width:175px;"></td>
			<td style="width:159px;"></td>
			<td style="width:152px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Magnetic stirring bar&#160;</td>
			<td style="width:175px;"></td>
			<td style="width:159px;"></td>
			<td style="width:152px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Round bottom or three neck flask</td>
			<td style="width:175px;"></td>
			<td style="width:159px;"></td>
			<td style="width:152px;"></td>
		</tr>
		<tr height="40">
			<td height="40" style="height:40px;width:297px;">Rubber septums of sufficient size for chosen round bottom or three neck flask</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">5 mL hypodermic syringes</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Hypodermic needles</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Rubber party ballons</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Rubber bands</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:297px;">A source of N2 gas</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Rotary evaporator</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Drying oven</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">NMR tubes</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">NMR spectrometer</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">500 mL beakers</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:297px;">Glass or plastic pipettes</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>

amide coupling reaction for the synthesis of bispyridine-based ligands and their complexation to platinum as dinuclear anticancer agents

Amide coupling reactions can be used to synthesize bispyridine-based ligands for use as bridging linkers in multinuclear platinum anticancer drugs. Isonicotinic acid, or its derivatives, are coupled to variable length diaminoalkane chains under an inert atmosphere in anhydrous DMF or DMSO with the use of a weak base, triethylamine, and a coupling agent, 1-propylphosphonic anhydride. The products precipitate from solution upon formation or can be precipitated by the addition of water. If desired, the ligands can be further purified by recrystallization from hot water. Dinuclear platinum complex synthesis using the bispyridine ligands is done in hot water using transplatin. The most informative of the chemical characterization techniques to determine the structure and gross purity of both the bispyridine ligands and the final platinum complexes is 1H NMR with particular analysis of the aromatic region of the spectra (7-9 ppm). The platinum complexes have potential application as anticancer agents and the synthesis method can be modified to produce trinuclear and other multinuclear complexes with different hydrogen bonding functionality in the bridging ligand.

的双吡啶配体和它们各自的双核铂络合物的特征在于，用1 H，13 C和195的Pt NMR（ 表1和2），和电喷雾电离质谱法。准确的熔点可以使用差示扫描量热法和纯度最好是通过元素分析的C，H和N的百分含量测定来确定。最普遍使用的是1 H-NMR，因为它是快速和易于使用的，给人以共鸣，能够明确证明成功酰胺耦合和铂协调（ 表1和表2）最终产?...

Watch this Scientific Journal Video about Amide Coupling Reaction for the Synthesis of Bispyridine-based Ligands and Their Complexation to Platinum as Dinuclear Anticancer Agents at JoVE.com

Amide Coupling Reaction for the Synthesis of Bispyridine-based Ligands and Their Complexation to Platinum as Dinuclear Anticancer Agents

这个协议描述了使用异烟酸和二氨基​​烷烃的酰胺偶联反应，以形成适合于在多核铂配合物，其中结合的抗癌药物BBR3464和吡铂方面的合成中使用的桥接配体。

酰胺偶联反应为双吡啶基配体及其络合合成，以白金为双核抗癌药物

Amide coupling reactions can be used to synthesize bispyridine-based ligands for use as bridging linkers in multinuclear platinum anticancer drugs. ...

amide-coupling-reaction-for-synthesis-bispyridine-based-ligands-their

Research

JoVE Journal

Chemistry

13.8K 次观看.  The University of Sydney. 这个协议描述了使用异烟酸和二氨基​​烷烃的酰胺偶联反应，以形成适合于在多核铂配合物，其中结合的抗癌药物BBR3464和吡铂方面的合成中使用的桥接配体。 

视频: Amide Coupling Reaction for the Synthesis of Bispyridine-based Ligands and Their Complexation to Platinum as Dinuclear Anticancer Agents

Anticancer Metal Complexes: Synthesis and Cytotoxicity Evaluation by the MTT Assay

Titanium (IV) and vanadium (V) complexes are highly potent anticancer agents. A challenge in their synthesis refers to their hydrolytic instability; therefore their preparation should be conducted under an inert atmosphere. Evaluation of the anticancer activity of these complexes can be achieved by the MTT assay.
The MTT assay is a colorimetric viability assay based on enzymatic reduction of the MTT molecule to formazan when it is exposed to viable cells. The outcome of the reduction is a color change of the MTT molecule. Absorbance measurements relative to a control determine the percentage of remaining viable cancer cells following their treatment with varying concentrations of a tested compound, which is translated to the compound anticancer activity and its IC50 values. The MTT assay is widely common in cytotoxicity studies due to its accuracy, rapidity, and relative simplicity.
Herein we present a detailed protocol for the synthesis of air sensitive metal based drugs and cell viability measurements, including preparation of the cell plates, incubation of the compounds with the cells, viability measurements using the MTT assay, and determination of IC50 values.

A method for synthesis of air-sensitive titanium and vanadium anticancer agents is described, along with the evaluation of their cytotoxic activity towards human cancer cell line by the MTT Assay.

抗癌金属配合物的合成与细胞毒性评价MTT法

Titanium (IV) and vanadium (V) complexes are highly potent anticancer agents. A challenge in their synthesis refers to their hydrolytic instability; ...

科研

化学

Split-and-pool Synthesis and Characterization of Peptide Tertiary Amide Library

Peptidomimetics are great sources of protein ligands. The oligomeric nature of these compounds enables us to access large synthetic libraries on solid phase by using combinatorial chemistry. One of the most well studied classes of peptidomimetics is peptoids. Peptoids are easy to synthesize and have been shown to be proteolysis-resistant and cell-permeable. Over the past decade, many useful protein ligands have been identified through screening of peptoid libraries. However, most of the ligands identified from peptoid libraries do not display high affinity, with rare exceptions. This may be due, in part, to the lack of chiral centers and conformational constraints in peptoid molecules. Recently, we described a new synthetic route to access peptide tertiary amides (PTAs). PTAs are a superfamily of peptidomimetics that include but are not limited to peptides, peptoids and N-methylated peptides. With side chains on both &#945;-carbon and main chain nitrogen atoms, the conformation of these molecules are greatly constrained by sterical hindrance and allylic 1,3 strain. (Figure 1) Our study suggests that these PTA molecules are highly structured in solution and can be used to identify protein ligands. We believe that these molecules can be a future source of high-affinity protein ligands. Here we describe the synthetic method combining the power of both split-and-pool and sub-monomer strategies to synthesize a sample one-bead one-compound (OBOC) library of PTAs.

Peptide tertiary amides (PTAs) are a superfamily of peptidomimetics that include but are not limited to peptides, peptoids and N-methylated peptides. Here we describe a synthetic method which combines&#160;both split-and-pool and sub-monomer strategies to synthesize a one-bead one-compound library of PTAs.

分裂和池合成及肽叔酰胺图书馆表征

Peptidomimetics are great sources of protein ligands. The oligomeric nature of these compounds enables us to access large synthetic libraries on solid ...

Synthesis of Non-uniformly Pr-doped SrTiO3 Ceramics and Their Thermoelectric Properties

We demonstrate a novel synthesis strategy for the preparation of Pr-doped SrTiO3 ceramics via a combination of solid state reaction and spark plasma sintering techniques. Polycrystalline ceramics possessing a unique morphology can be achieved by optimizing the process parameters, particularly spark plasma sintering heating rate. The phase and morphology of the synthesized ceramics were investigated in detail using X-ray diffraction, scanning electron microcopy and energy-dispersive X-ray spectroscopy. It was observed that the grains of these bulk Pr-doped SrTiO3 ceramics were enhanced with Pr-rich grain boundaries. Electronic and thermal transport properties were also investigated as a function of temperature and doping concentration. Such a microstructure was found to give rise to improved thermoelectric properties. Specifically, it resulted in a significant improvement in carrier mobility and the thermoelectric power factor. Simultaneously, it also led to a marked reduction in the thermal conductivity. As a result, a significant improvement (> 30%) in the thermoelectric figure of merit was achieved for the whole temperature range over all previously reported maximum values for SrTiO3-based ceramics. This synthesis demonstrates the steps for the preparation of bulk polycrystalline ceramics of non-uniformly Pr-doped SrTiO3.

Synthesis of Non-uniformly Pr-doped SrTiO3 Ceramics and Their Thermoelectric Properties

A protocol for the synthesis and processing of polycrystalline SrTiO3 ceramics doped non-uniformly with Pr is presented along with the investigation of their thermoelectric properties.

非均匀掺Pr的SrTiO的合成<sub&gt; 3</sub&gt;陶瓷及其热电性能

We demonstrate a novel synthesis strategy for the preparation of Pr-doped SrTiO3 ceramics via a combination of solid state reaction and spark plasma ...

Synthesis and Reaction Chemistry of Nanosize Monosodium Titanate

This paper describes the synthesis and peroxide-modification of nanosize monosodium titanate (nMST), along with an ion-exchange reaction to load the material with Au(III) ions. The synthesis method was derived from a sol-gel process used to produce micron-sized monosodium titanate (MST), with several key modifications, including altering reagent concentrations, omitting a particle seed step, and introducing a non-ionic surfactant to facilitate control of particle formation and growth. The resultant nMST material exhibits spherical-shaped particle morphology with a monodisperse distribution of particle diameters in the range from 100 to 150&#160;nm. The nMST material was found to have a Brunauer-Emmett-Teller (BET) surface area of 285 m2g-1, which is more than an order of magnitude higher than the micron-sized MST. The isoelectric point of the nMST measured 3.34 pH units, which is a pH unit lower than that measured for the micron-size MST. The nMST material was found to serve as an effective ion exchanger under weakly acidic conditions for the preparation of an Au(III)-exchange nanotitanate. In addition, the formation of the corresponding peroxotitanate was demonstrated by reaction of the nMST with hydrogen peroxide.

The surfactant mediated sol-gel synthesis of nanosized monosodium titanate is described, along with preparation of the corresponding peroxide modified material. An ion-exchange reaction with Au(III) is also presented.

纳米尺寸钛酸二氢钠的合成和化学反应

This paper describes the synthesis and peroxide-modification of nanosize monosodium titanate (nMST), along with an ion-exchange reaction to load the ...

HKUST-1 as a Heterogeneous Catalyst for the Synthesis of Vanillin

Vanillin (4-hydoxy-3-methoxybenzaldehyde) is the main component of the extract of vanilla bean. The natural vanilla scent is a mixture of approximately 200 different odorant compounds in addition to vanillin. The natural extraction of vanillin (from the orchid Vanilla planifolia, Vanilla tahitiensis and Vanilla pompon) represents only 1% of the worldwide production and since this process is expensive and very long, the rest of the production of vanillin is synthesized. Many biotechnological approaches can be used for the synthesis of vanillin from lignin, phenolic stilbenes, isoeugenol, eugenol, guaicol, etc., with the disadvantage of harming the environment since these processes use strong oxidizing agents and toxic solvents. Thus, eco-friendly alternatives on the production of vanillin are very desirable and thus, under current investigation. Porous coordination polymers (PCPs) are a new class of highly crystalline materials that recently have been used for catalysis. HKUST-1 (Cu3(BTC)2(H2O)3, BTC = 1,3,5-benzene-tricarboxylate) is a very well known PCP which has been extensively studied as a heterogeneous catalyst. Here, we report a synthetic strategy for the production of vanillin by the oxidation of trans-ferulic acid using HKUST-1 as a catalyst.

The conversion of trans-ferulic acid to vanillin was achieved by heterogeneous catalysis. HKUST-1 was employed in this synthesis and the essential step in the catalytic process was the generation of unsaturated metal sites. Thus, when the catalyst was activated under vacuum, full vanillin conversion (yield of 95%) was obtained.

科大-1作为香兰素的合成的非均相催化剂

Vanillin (4-hydoxy-3-methoxybenzaldehyde) is the main component of the extract of vanilla bean. The natural vanilla scent is a mixture of approximately ...

Synthesis of Protein Bioconjugates via Cysteine-maleimide Chemistry

The chemical linking or bioconjugation of proteins to fluorescent dyes, drugs, polymers and other proteins has a broad range of applications, such as the development of antibody drug conjugates (ADCs) and nanomedicine, fluorescent microscopy and systems chemistry. For many of these applications, specificity of the bioconjugation method used is of prime concern. The Michael addition of maleimides with cysteine(s) on the target proteins is highly selective and proceeds rapidly under mild conditions, making it one of the most popular methods for protein bioconjugation.
We demonstrate here the modification of the only surface-accessible cysteine residue on yeast cytochrome c with a ruthenium(II) bisterpyridine maleimide. The protein bioconjugation is verified by gel electrophoresis and purified by aqueous-based fast protein liquid chromatography in 27% yield of isolated protein material. Structural characterization with MALDI-TOF MS and UV-Vis is then used to verify that the bioconjugation is successful. The protocol shown here is easily applicable to other cysteine - maleimide coupling of proteins to other proteins, dyes, drugs or polymers.

Synthesis of Protein Bioconjugates via Cysteine-maleimide Chemistry

This protocol details the important steps required for the bioconjugation of a cysteine containing protein to a maleimide, including reagent purification, reaction conditions, bioconjugate purification and bioconjugate characterization.

蛋白质生物缀合物的合成<em&gt;通过</em&gt;半胱氨酸马来酰亚胺化学

The chemical linking or bioconjugation of proteins to fluorescent dyes, drugs, polymers and other proteins has a broad range of applications, such as the ...

Synthesis of Cyclic Polymers and Characterization of Their Diffusive Motion in the Melt State at the Single Molecule Level

We demonstrate a method for the synthesis of cyclic polymers and a protocol for characterizing their diffusive motion in a melt state at the single molecule level. An electrostatic self-assembly and covalent fixation (ESA-CF) process is used for the synthesis of the cyclic poly(tetrahydrofuran) (poly(THF)). The diffusive motion of individual cyclic polymer chains in a melt state is visualized using single molecule fluorescence imaging by incorporating a fluorophore unit in the cyclic chains. The diffusive motion of the chains is quantitatively characterized by means of a combination of mean-squared displacement (MSD) analysis and a cumulative distribution function (CDF) analysis. The cyclic polymer exhibits multiple-mode diffusion which is distinct from its linear counterpart. The results demonstrate that the diffusional heterogeneity of polymers that is often hidden behind ensemble averaging can be revealed by the efficient synthesis of the cyclic polymers using the ESA-CF process and the quantitative analysis of the diffusive motion at the single molecule level using the MSD and CDF analyses.

A protocol for the synthesis and characterization of diffusive motion of cyclic polymers at the single molecule level is presented.

环状聚合物的合成及其在熔融状态扩散运动的表征在单分子水平

We demonstrate a method for the synthesis of cyclic polymers and a protocol for characterizing their diffusive motion in a melt state at the single ...

Preparation and In Vitro Characterization of Dendrimer-based Contrast Agents for Magnetic Resonance Imaging

Paramagnetic complexes of gadolinium(III) with acyclic or macrocyclic chelates are the most commonly used contrast agents (CAs) for magnetic resonance imaging (MRI). Their purpose is to enhance the relaxation rate of water protons in tissue, thus increasing the MR image contrast and the specificity of the MRI measurements. Current clinically approved contrast agents are low molecular weight molecules that are rapidly cleared from the body. The use of dendrimers as carriers of paramagnetic chelators can play an important role in the future development of more efficient MRI contrast agents. Specifically, the increase in local concentration of the paramagnetic species results in a higher signal contrast. Furthermore, this CA provides a longer tissue retention time due to its high molecular weight and size. Here, we demonstrate a convenient procedure for the preparation of macromolecular MRI contrast agents based on poly(amidoamine) (PAMAM) dendrimers with monomacrocyclic DOTA-type chelators (DOTA &#8211; 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetate). The chelating unit was appended by exploiting the reactivity of the isothiocyanate (NCS) group towards the amine surface groups of the PAMAM dendrimer to form thiourea bridges. Dendrimeric products were purified and analyzed by means of nuclear magnetic resonance spectroscopy, mass spectrometry, and elemental analysis. Finally, high resolution MR images were recorded and the signal contrasts obtained from the prepared dendrimeric and the commercially available monomeric agents were compared.

Preparation and In Vitro Characterization of Dendrimer-based Contrast Agents for Magnetic Resonance Imaging

This protocol describes the preparation and characterization of a dendrimeric magnetic resonance imaging (MRI) contrast agent that carries cyclen-based macrocyclic chelates coordinating paramagnetic gadolinium ions. In a series of MRI experiments in vitro, this agent produced an amplified MRI signal when compared to the commercially available monomeric analogue.

制备及<em&gt;体外</em&gt;磁共振成像基于树状大分子造影剂的表征

Paramagnetic complexes of gadolinium(III) with acyclic or macrocyclic chelates are the most commonly used contrast agents (CAs) for magnetic resonance ...

Synthesis of Platinum-nickel Nanowires and Optimization for Oxygen Reduction Performance

Platinum-nickel (Pt-Ni) nanowires were developed as fuel cell electrocatalysts, and were optimized for the performance and durability in the oxygen reduction reaction. Spontaneous galvanic displacement was used to deposit Pt layers onto Ni nanowire substrates. The synthesis approach produced catalysts with high specific activities and high Pt surface areas. Hydrogen annealing improved Pt and Ni mixing and specific activity. Acid leaching was used to preferentially remove Ni near the nanowire surface, and oxygen annealing was used to stabilize near-surface Ni, improving durability and minimizing Ni dissolution. These protocols detail the optimization of each post-synthesis processing step, including hydrogen annealing to 250 &#176;C, exposure to 0.1 M nitric acid, and oxygen annealing to 175 &#176;C. Through these steps, Pt-Ni nanowires produced increased activities more than an order of magnitude than Pt nanoparticles, while offering significant durability improvements. The presented protocols are based on Pt-Ni systems in the development of fuel cell catalysts. These techniques have also been used for a variety of metal combinations, and can be applied to develop catalysts for a number of electrochemical processes.

&#160; The protocol describes the synthesis and electrochemical testing of platinum-nickel nanowires. Nanowires were synthesized by the galvanic displacement of a nickel nanowire template. Post-synthesis processing, including hydrogen annealing, acid leaching, and oxygen annealing were used to optimize nanowire performance and durability in the oxygen reduction reaction.

铂镍纳米线的合成及减氧性能优化

Platinum-nickel (Pt-Ni) nanowires were developed as fuel cell electrocatalysts, and were optimized for the performance and durability in the oxygen ...

Preparation of Stable Bicyclic Aziridinium Ions and Their Ring-Opening for the Synthesis of Azaheterocycles

Bicyclic aziridinium ions were generated by the removal of an appropriate leaving group through internal nucleophilic attack by nitrogen atom in the aziridine ring. The utility of bicyclic aziridinium ions, specifically 1-azoniabicyclo[3.1.0]hexane and 1-azoniabicyclo[4.1.0]heptane tosylate highlighted in the aziridine ring openings by the nucleophile with the release of the ring strain to yield the corresponding ring-expanded azaheterocycles such as pyrrolidine, piperidine and azepane with diverse substituents on the ring in regio- and stereospecific manner. Herein, we report a simple and convenient method for the preparation of the stable 1-azabicyclo[4.1.0]heptane tosylate followed by selective ring opening via a nucleophilic attack either at the bridge or at the bridgehead carbon to yield piperidine and azepane rings, respectively. This synthetic strategy allowed us to prepare biologically active natural products containing piperidine and azepane motif including sedamine, allosedamine, fagomine and balanol in highly efficient manner.

Bicyclic aziridinium ions such as 1-azoniabicyclo[4.1.0]heptane tosylate were generated from 2-[4-tolenesulfonyloxybutyl]aziridine, which was utilized for the preparation of substituted piperidines and azepanes via regio- and stereospecific ring-expansion with various nucleophiles. This highly efficient protocol allowed us to prepare diverse azaheterocycles including natural products such as fagomine, febrifugine analogue and balanol.

稳定笼 Aziridinium 离子的制备及其开环 Azaheterocycles 的合成

Bicyclic aziridinium ions were generated by the removal of an appropriate leaving group through internal nucleophilic attack by nitrogen atom in the ...