Diese Studie wurde durch einen Zuschuss (CNUH-BRI-2012-02-005) finanziert durch die Biomedical Research Institute der Chonbuk National University Hospital (CNUH-BRI), Republik Korea unterstützt.

Die Institutional Animal Care und Use Committee der Chonbuk National University genehmigt diese Studie. Die Behandlung, Verwendung und Handhabung von Tieren folgten allen Richtlinien und Richtlinien. Pflegen Sie den Operationssaal bei 24 ° C. 1. Anästhesie <ol><li> Akklimatisieren Sie Miniaturschweine, im Alter von 12 Monaten, in der Versuchseinheit für mindestens eine Woche. Führen Sie eine klinische Untersuchung der Atemfrequenz, Herzfrequenz und Körpertemperatur durch. Füttern Sie jedes Miniaturschwein noch 12 Stunden vor dem Anästhesieverfahren. </li><li> In die laterale Halsmuskelregion, hinter dem Ohr, für die Prämedikation injizieren Atropin (0,05 mg / kg) und Ketamin (20 mg / kg) / Xylaxin (2 mg / kg) </li><li> Nach der Sedierung, legen Sie ein Gummiband um die Unterseite des Ohres und reinigen Sie das Ohr mit topischem Alkohol. </li><li> Legen Sie einen Plastikkatheter aus der Nadel in die Ohrvene und entfernen Sie das Gummiband. Vergewissern Sie sich, dass der Katheter korrekt platziert ist. GrippeDen Katheter mit heparinierter Kochsalzlösung und mit Klebeband fixieren. </li><li> Für die endotracheale Intubation, positioniere das Miniaturschwein in der sternalen Wiederholung. Mit Hilfe eines Assistenten, halten Sie den Kiefer des Schweins mit einer geeigneten Schlinge und öffnen Sie den Mund. <ol><li> Führen Sie die Spitze des Laryngoskops in die Rachenhöhle, um die Epiglottis aus dem weichen Gaumen zu verdrängen. Benutze die Spitze des Laryngoskopblattes, um die Stimmbänder sichtbar zu machen und das Endotrachealtubus während der Exspiration in die Trachea zu bringen. </li><li> Fühlen Sie sich für einen freien Durchgang von Luft für die richtige Intubation und überprüfen Sie die Brust Auskultation für Atmung Sounds in beiden linken und rechten Seiten des Mini-Schwein. </li></ol></li><li> Füllen Sie die Manschette mit dem entsprechenden Luftvolumen des Endotrachealtubus mit Luft mit einer 10-ml-Spritze und befestigen Sie den Schlauch mit der Klebebandschraube an der Schnauze. </li><li> Geben Sie eine Konzentration von 2,0% Isofluran, eine Inhalationsanästhesie für eine verlängerte Anästhesie, durch die EndotrAcheal Intubation Rohr. Testen Sie die Hornhaut und palpebralen Reflexe, um die Anästhesie zu bestätigen und Salbe auf die Augen zu verwenden, um Trockenheit zu verhindern. </li><li> Überwachen Sie das Herz-Kreislauf-System, die Atemwege und die Körpertemperatur während der Anästhesie mindestens alle 5 min, bis das Miniatur-Schwein sich erholt. </li><li> 30 min vor der Wirbelsäulenchirurgie, 30 mg / kg Cefazolin IV langsam, die erste Generation der Cephalosporin-Antibiotika. </li><li> Verabreichen Sie 5 - 10 ml / kg / h warme (37 ° C) Kochsalzlösung mit einer IV-Linie, um die Homöostase aufrechtzuerhalten und 50 μg / kg / min Fentanyl zur Kontrolle der Schmerzen bereitzustellen. </li><li> Nach der Wirbelsäulenchirurgie, Extubation durchführen, wenn ein starker Schluckreflex sichtbar ist. </li><li> Nehmen Sie das Miniaturschwein in einen Raum und überwachen Sie, bis er sich von der Anästhesie erholt. Geben Sie Nahrung und Wasser, wenn das Miniaturschwein voll bewusst ist. </li><li> Tragen Sie 3 mg / kg Enrofloxacin-Antibiotikum mit 4,4 mg / kg Carprofen täglich zur Schmerzkontrolle während der ersten 3 Tage auf. </li><li> MoniDas Schwein täglich bis zum Entfernen der Nähte. </li></ol> 2. Wirbelsäulenchirurgie <ol><li> Autoklavieren Sie die transpedikulären Schrauben und die hinteren Fixiersysteme zur Sterilisation nach den Richtlinien des Herstellers. </li><li> Rasieren Sie die Rückseite des Miniaturschweins, ca. 10 cm von der Mitte nach links oder rechts, mit einem Rasierer, während das Schwein in einer Rückenlage ist. Die Haut mit Povidon-Jod-Lösung und 70% Alkohol reinigen. </li><li> Machen Sie eine Längsschnittlinie von der zweiten Dornfortsatz der Lendenwirbelsäule bis zum ersten medianen Sakralkamm mit einem Skalpell. Durch das subkutane Gewebe und die Blende auf die Spitze der Dornfortsätze zerlegen. </li><li> Erhöhen Sie die Paraspinalmuskeln subperiostal von den darunter liegenden Lamininen mit einem Cobb-Aufzug. Dissektion entlang des Dornfortsatzes und Lamina beschränkt auf die Facettengelenke. </li><li> Öffnen Sie den oberflächlichen Kortex des Einstiegspunktes (der dem Mammillarfortsatz von L3 gerade unterlegen istAuf L5 auf beiden Seiten) mit einem Grat oder einem Rongeur. </li><li> Setzen Sie den Führungsstift an einer offenen Stelle, parallel zur oberen Endplatte und in einem 20 ° Winkel zum Dornfortsatz ein. Definieren Sie den idealen Ausgangspunkt mit C-Arm oder tragbaren postero-anterior / lateralen Röntgenstrahlen. </li><li> Setzen Sie eine Pedikelsonde bis zu 25 mm nach dem Röntgenbild ein. Bestätigen Sie die komplette intraossäre Trajektorie mit Pedikel und Körper Palpation mit einem Pedikel klingende Gerät. </li><li> Setzen Sie sechs Pedikelschrauben in den vorbereiteten Stiel von L3 bis L5 ein, bis der Schraubenkopf gut sitzt. Richten Sie die Seitenöffnung des Implantatkopfes in die gewünschte Richtung und richten Sie die horizontale Position mit der Stabtrajektorie aus. </li><li> Setzen Sie zwei Stäbe in beide Seiten der Pedikelschraubenköpfe ein. Setzen Sie die Hülse und die Mutter am Pedikelschraubenkopf mit einem Universalgriff ein. </li><li> Die Mutter mit einem geraden Steckschlüssel locker anziehen und die Mutter mit einem Drehmomentschlüssel festziehen. </li><li> Bestätigen Sie die Positionen oF die Pedikelschrauben mit tragbaren postero-anterior / lateralen Röntgenstrahlen. HINWEIS: Warten Sie, bis das Miniaturschwein aufwacht und überprüfen Sie die Gangmuster und die motorische Funktion des Hintergliedes, um festzustellen, ob eine Schraube schlecht implantiert wurde. </li><li> Bewässern Sie die Chirurgie mit 3 L normaler Kochsalzlösung mit einer Glühbirne Spülmaschine mit Absaugung. </li><li> Legen Sie einen Silikonabfluss in die Chirurgie und nehmen Sie die Silikonspitze heraus. Schließen Sie die paraspinalen Muskeln und subkutan mit 1,0 metrischen resorbierbaren Nähten. Schließen Sie die Haut mit 2,0 metrischen, nicht resorbierbaren Nylonnähten. </li><li> Desinfizieren Sie die Nahtstelle mit Povidon-Jod und wenden Sie einen Verband mit sterilisiertem Gaze und Klebeband an. </li></ol> 3. Ernteverfahren <ol><li> Nach 12 Wochen postoperativ injizieren Sie Xylazin (2 mg / kg) und Ketamin (10 mg / kg) in den lateralen Halsmuskelbereich, hinter dem Ohr, für die Prämedikation. </li><li> Nach der Sedierung 15 mg / kg KCl direkt in die Ohrvene gebenKatheter für Euthanasie. </li><li> Machen Sie eine Längsschnittlinie Einschnitt bei der vorherigen Chirurgie Narbe Läsion. Das Weichgewebe und die Paraspinalmuskulatur zerlegen. </li><li> Explosion des Dornfortsatzes der Lendenwirbelsäulen, Laminas, Stäbchen, Nüsse und Querfortsätze von L3 bis L5. </li><li> Entfernen Sie die Muttern mit einem Drehmomentschlüssel und Stäben. Schneiden Sie den L2-3-Plattenplatz und den L5-S1-Plattenplatz mit einer oszillierenden Säge. </li><li> Dissect beide Seiten des mittleren und vorderen Teils der L3-5 Wirbelsäule mit einem Cobb Aufzug und Turmzange. Nach der Ernte, wenn die Wirbelsäule nicht sofort getestet werden kann, wickeln Sie sie in mit Kochsalzlösung getränkte Gaze ein und lagern bei -20 ° C. </li></ol>

<ol>
	<li>Greenfield, R. T., Grant, R. E., Bryant, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pedicle+screw+fixation+in+the+management+of+unstable+thoracolumbar+spine+injuries.">Pedicle screw fixation in the management of unstable thoracolumbar spine injuries.</a> Orthop Rev. 21 (6), 701-706 (1992).</li><li>Upasani, V. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pedicle+screw+surface+coatings+improve+fixation+in+nonfusion+spinal+constructs.">Pedicle screw surface coatings improve fixation in nonfusion spinal constructs.</a> Spine. 34 (4), 335-343 (2009).</li><li>Halvorson, T. L., Kelley, L. A., Thomas, K. A., Whitecloud, T. S., Cook, S. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+bone+mineral+density+on+pedicle+screw+fixation.">Effects of bone mineral density on pedicle screw fixation.</a> Spine. 19 (21), 2415-2420 (1994).</li><li>Weinstein, J. N., Spratt, K. F., Spengler, D., Brick, C., Reid, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spinal+pedicle+fixation:+reliability+and+validity+of+roentgenogram-based+assessment+and+surgical+factors+on+successful+screw+placement.">Spinal pedicle fixation: reliability and validity of roentgenogram-based assessment and surgical factors on successful screw placement.</a> Spine. 13 (9), 1012-1018 (1988).</li><li>Fini, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biological+assessment+of+the+bone-screw+interface+after+insertion+of+uncoated+and+hydroxyapatite-coated+pedicular+screws+in+the+osteopenic+sheep.">Biological assessment of the bone-screw interface after insertion of uncoated and hydroxyapatite-coated pedicular screws in the osteopenic sheep.</a> J Biomed Mater Res A. 66 (1), 176-183 (2003).</li><li>Kim, D. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+Titanium-Coated+Pedicle+Screws:+In+Vivo+Porcine+Lumbar+Spine+Model.">Evaluation of Titanium-Coated Pedicle Screws: In Vivo Porcine Lumbar Spine Model.</a> World Neurosurg. 91, 163-171 (2016).</li><li>Upasani, V. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pedicle+screw+surface+coatings+improve+fixation+in+nonfusion+spinal+constructs.">Pedicle screw surface coatings improve fixation in nonfusion spinal constructs.</a> Spine. 34 (4), 335-343 (2009).</li><li>Smit, T. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+use+of+a+quadrupted+as+an+in+vivo+model+for+the+study+of+the+spine-biomechanical+considrations.">The use of a quadrupted as an in vivo model for the study of the spine-biomechanical considrations.</a> Eur Spine J. 11 (2), 137-144 (2002).</li><li>Aldini, N. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pedicular+fixation+in+the+osteoporotic+spine:+a+pilot+in+vivo+study+on+long-term+ovariectomized+sheep.">Pedicular fixation in the osteoporotic spine: a pilot in vivo study on long-term ovariectomized sheep.</a> J Orthop Res. 20 (6), 1217-1224 (2002).</li><li>Fini, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biological+assessment+of+the+bone-screw+interface+after+insertion+of+uncoated+and+hydroxyapatite-coated+pedicular+screws+in+the+osteopenic+sheep.">Biological assessment of the bone-screw interface after insertion of uncoated and hydroxyapatite-coated pedicular screws in the osteopenic sheep.</a> J Biomed Mater Res A. 66 (1), 176-183 (2003).</li><li>Branemark, R., Ohrnell, L. O., Skalak, R., Carlsson, L., Branemark, P. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomechanical+characterization+of+osseointegration:+an+experimental+in+vivo+investigation+in+the+beagle+dog.">Biomechanical characterization of osseointegration: an experimental in vivo investigation in the beagle dog.</a> J Orthop Res. 16 (1), 61-69 (1998).</li><li>McLain, R. F., Yerby, S. A., Moseley, T. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+morphometry+of+L4+vertebrae:+comparison+of+large+animal+models+for+the+human+lumbar+spine.">Comparative morphometry of L4 vertebrae: comparison of large animal models for the human lumbar spine.</a> Spine. 27 (8), E200-E206 (2002).</li><li>Giavaresi, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+preclinical+evaluation+of+the+influence+of+osteoporosis+on+the+anchorage+of+different+pedicle+screw+designs.">In vivo preclinical evaluation of the influence of osteoporosis on the anchorage of different pedicle screw designs.</a> Eur Spine J. 20 (8), 1289-1296 (2011).</li><li>Hasegawa, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydroxyapatite-coating+of+pedicle+screws+improves+resistance+against+pull-out+force+in+the+osteoporotic+canine+lumbar+spine+model:+a+pilot+study.">Hydroxyapatite-coating of pedicle screws improves resistance against pull-out force in the osteoporotic canine lumbar spine model: a pilot study.</a> Spine J. 5 (3), 239-243 (2005).</li><li>Smorgick, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-+versus+multilevel+fusion+for+single-level+degenerative+spondylolisthesis+and+multilevel+lumbar+stenosis:+four-year+results+of+the+spine+patient+outcomes+research+trial.">Single- versus multilevel fusion for single-level degenerative spondylolisthesis and multilevel lumbar stenosis: four-year results of the spine patient outcomes research trial.</a> Spine. 38 (10), 797-805 (2013).</li><li>Busscher, I., Ploegmakers, J. J., Verkerke, G. J., Veldhuizen, A. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+anatomical+dimensions+of+the+complete+human+and+porcine+spine.">Comparative anatomical dimensions of the complete human and porcine spine.</a> Eur Spine J. 19 (7), 1104-1114 (2010).</li></ol>

Die Autoren haben nichts mit diesem Papier zu veröffentlichen.

Die Auswertung von transpedikulären Schrauben in der Schweinerücken erfordert viel Zeit und Mühe. Zuerst ist das Miniaturschwein ein großes Tier. Für Tierpflege und Anästhesie benötigt der Forscher ein spezialisiertes Protokoll. Zweitens sollte die Operation eine Umgebung ähnlich der menschlichen Chirurgie beibehalten. Der Zweck der Auswertung von Pedikelschrauben in der Schweinerücken besteht darin, eine effiziente Schraube zu entwickeln, die auf den Menschen angewendet werden kann. Drittens erfordert die Ausw...

Transpedicular screw fixation is a gold-standard treatment for degenerative lumbar spine and bursting fracture because it involves three columns of the spine and achieves stabilization1,2. However, most patients who undergo such surgery also have osteoporosis3,4. Many studies have evaluated the fixation strength and the osseointegration status of transpedicular screws, because the loosening of pedicle screws currently in use has been reported in patients with osteoporosis5,6.
The porcine spine is similar to the human spine in terms of size. It is less expensive compared to a primate model7. Furthermore, an in vivo mechanical study has demonstrated that the quadruped porcine spine is essentially loaded in the same way as that of the human spine8, which is why many researchers use porcine spines for studies on the prevention of pedicle screw loosening. However, it takes several months to study pedicle screws in the porcine spine because identifying the long-term stability of pedicle screws takes times. In order to compare different types of screws in the vertebral body, it is necessary to insert the screws in similar positions. Therefore, researchers should be well-acquainted with proper anesthesia techniques, standardized surgical protocols, and harvest procedures before performing any experiments. Here, we describe a detailed method for anesthesia, surgery, and harvest for the evaluation of pedicle screw fixation using a porcine spine model, including ex vivo imaging, histology, and strength testing.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Miniature pig</td>
			<td>OrientBio</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Atropine</td>
			<td>Jeil pharmaceutical</td>
			<td>A04900241</td>
			<td>Anesthesia</td>
		</tr>
		<tr>
			<td>Over-the needle plastic catheter</td>
			<td>BD</td>
			<td>REF382412</td>
			<td>Maintenance of IV line</td>
		</tr>
		<tr>
			<td>Ketamine</td>
			<td>Yuhan</td>
			<td>A04502441</td>
			<td>Anesthesia</td>
		</tr>
		<tr>
			<td>Xylazine</td>
			<td>Bayer Korea</td>
			<td>A00800071</td>
			<td>Anesthesia</td>
		</tr>
		<tr>
			<td>Laryngoscope</td>
			<td>Karl storz</td>
			<td></td>
			<td>Intubation</td>
		</tr>
		<tr>
			<td>Endotracheal tube</td>
			<td>Covidien</td>
			<td></td>
			<td>Intubation</td>
		</tr>
		<tr>
			<td>Isoflurane</td>
			<td>JW pharmaceutical Co</td>
			<td>A02104781</td>
			<td>Anesthesia</td>
		</tr>
		<tr>
			<td>Eye ointment</td>
			<td>Hanlim pharma</td>
			<td>A37851721</td>
			<td>Protection of pig&#39;s eye</td>
		</tr>
		<tr>
			<td>Cefazolin</td>
			<td>Donga pharma</td>
			<td>A01503951</td>
			<td>Antibiotics</td>
		</tr>
		<tr>
			<td>Saline</td>
			<td>JW pharmaceutical Co</td>
			<td>A02151392</td>
			<td>Maintenance of fluid homeostasis</td>
		</tr>
		<tr>
			<td>Fentanyl</td>
			<td>Hana pharm</td>
			<td>C03200032</td>
			<td>Pain control</td>
		</tr>
		<tr>
			<td>Enrofloxacin</td>
			<td>Bayer</td>
			<td>93106-60-6&#160;</td>
			<td>Antibiotics</td>
		</tr>
		<tr>
			<td>Morphine</td>
			<td>Myungmoon pharma</td>
			<td>C03700091</td>
			<td>Pain control</td>
		</tr>
		<tr>
			<td>Meloxicam</td>
			<td>Boehringer Ingelheim</td>
			<td>A07600711</td>
			<td>Antibiotics</td>
		</tr>
		<tr>
			<td>Povidone-iodine</td>
			<td>Hyundai pharma</td>
			<td></td>
			<td>Wound dressing</td>
		</tr>
		<tr>
			<td>Scalpel blade size 15</td>
			<td>Braun</td>
			<td>&#160;I1 BB515</td>
			<td>Skin incision</td>
		</tr>
		<tr>
			<td>Cobb elevator</td>
			<td>Codman</td>
			<td>65-2546</td>
			<td>Dissection of muscle</td>
		</tr>
		<tr>
			<td>Burr</td>
			<td>Medtronic</td>
			<td></td>
			<td>Making of starting point of screw</td>
		</tr>
		<tr>
			<td>Rongeur</td>
			<td>Aesculap</td>
			<td>FO515R</td>
			<td>Making of starting point of screw</td>
		</tr>
		<tr>
			<td>Guide pin (K-wire)</td>
			<td>CE</td>
			<td>01067803</td>
			<td>Guidance of screw trajectory</td>
		</tr>
		<tr>
			<td>C-arm</td>
			<td>GE</td>
			<td>OEC 9800 plus</td>
			<td>Guidance of screw trajectory</td>
		</tr>
		<tr>
			<td>Portable X-ray</td>
			<td>Siemens</td>
			<td>Mobile XP hybrid</td>
			<td>Guidance of screw trajectory</td>
		</tr>
		<tr>
			<td>Pedicle probe</td>
			<td>OtisBiotech</td>
			<td>SPI-02-01</td>
			<td>Guidance of screw trajectory</td>
		</tr>
		<tr>
			<td>Pedicle sounding device</td>
			<td>OtisBiotech</td>
			<td>SPI-03-01</td>
			<td>Guidance of screw trajectory</td>
		</tr>
		<tr>
			<td>Pedicle screw</td>
			<td>OtisBiotech</td>
			<td>MS-40025</td>
			<td></td>
		</tr>
		<tr>
			<td>Posterior fixator systems</td>
			<td>OtisBiotech</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Rod&#160;</td>
			<td>OtisBiotech</td>
			<td>ROD-60140</td>
			<td>Rigid fixation between screws</td>
		</tr>
		<tr>
			<td>Universal handle</td>
			<td>OtisBiotech</td>
			<td>SPI-08-01</td>
			<td>To fix the screws to the rod</td>
		</tr>
		<tr>
			<td>Straight socket wrench</td>
			<td>OtisBiotech</td>
			<td>SPI-06-01</td>
			<td>To fix the screws to the rod</td>
		</tr>
		<tr>
			<td>counter torque wrench</td>
			<td>OtisBiotech</td>
			<td>SPI-07-01</td>
			<td>To fix the screws to the rod</td>
		</tr>
		<tr>
			<td>Bulb irrigation syringe</td>
			<td>Hyupsug medical</td>
			<td>HS-IR-140</td>
			<td>Irrigation</td>
		</tr>
		<tr>
			<td>Silicone drain</td>
			<td>Sewon medical</td>
			<td>2205-006</td>
			<td>To drain the fluid at the surgical site</td>
		</tr>
		<tr>
			<td>3.0 metric absorbable suture</td>
			<td>Ethicon</td>
			<td>BA1673H</td>
			<td>Muscle suture</td>
		</tr>
		<tr>
			<td>2.0 metric nonabsorbable nylon suture</td>
			<td>Ethicon</td>
			<td>W1626T</td>
			<td>Skin suture</td>
		</tr>
		<tr>
			<td>Gauze</td>
			<td>Kingphar Korea</td>
			<td>KP120-06</td>
			<td></td>
		</tr>
		<tr>
			<td>Pentobarbital</td>
			<td>Hanlim pharma</td>
			<td>645301221</td>
			<td>Euthanasia</td>
		</tr>
		<tr>
			<td>Oscillating saw</td>
			<td>Zimmer</td>
			<td></td>
			<td>Harvest spine</td>
		</tr>
		<tr>
			<td>Tower forceps</td>
			<td>Aesculap</td>
			<td>BF461R</td>
			<td>Harvest spine</td>
		</tr>
	</tbody>
</table>

an anesthesia, surgery, and harvest method for the evaluation of transpedicular screws using an in vivo porcine lumbar spine model

Pedikelschraubenfixierung ist der Goldstandard für die Behandlung von Wirbelsäulenerkrankungen. Allerdings haben viele Studien berichtet, die Frage der Lockerung der Pedikel Schrauben nach der Wirbelsäulenchirurgie, was eine ernste Sorge ist. Um dieses Problem zu lösen, wurden verschiedene Arten von Pedikelschrauben untersucht, um diejenigen mit guter Fixierungsstärke und Osseointegration im Wirbelsäulenbein zu identifizieren. Die Schweinernecke ist eine gute Alternative für die menschliche Wirbelsäule bei der Auswertung von Pedikelschrauben aufgrund der anatomischen Größe, der mechanischen Eigenschaften und der Kosten. Obwohl mehrere Studien berichtet haben, dass Pedikelschrauben im Schweinemodell effizient sind, hat keine Studie detaillierte Protokolle für die Auswertung einer Pedikelschraube mit dem Schweinemodell beschrieben. Hier beschreiben wir eine detaillierte Methode zur Bewertung von transpedikulären Schrauben mit einem In-vivo- Schwein-Lendenwirbelsäulen-Modell. Die hier angebotenen technischen Details für Anästhesie, Wirbelsäulenchirurgie und Ernte werden mit der Auswertung der t erleichternRanspedikuläre Schraubbefestigung Modell.

Ein detailliertes Protokoll für Anästhesie, Chirurgie und Ernte für die Auswertung von transpedikulären Schrauben mit einem in vivo Schwein Lendenwirbelsäule Modell wird hier beschrieben. Dieses Protokoll eignet sich für eine Reihe von Downstream-Analysen, einschließlich der mechanischen Prüfung (Abbildung 1 ), der quantitativen Mikro-CT-Bewertung (Abbildung 2 ) und der Histologie (Abbildung 3 ). Die repräsentative mech...

Watch this Scientific Journal Video about An Anesthesia, Surgery, and Harvest Method for the Evaluation of Transpedicular Screws Using an In Vivo Porcine Lumbar Spine Model at JoVE.com

An Anesthesia, Surgery, and Harvest Method for the Evaluation of Transpedicular Screws Using an In Vivo Porcine Lumbar Spine Model

Hier stellen wir eine Methode vor, um transpedikuläre Schrauben unter Verwendung eines In-vivo- Schweine-Lendenwirbelsystems zu bewerten.

Eine Anästhesie, Chirurgie und Ernteverfahren zur Bewertung von transpedikulären Schrauben mit einem<em&gt; In vivo</em&gt; Schwein Lendenwirbelsäule Modell

Pedicle screw fixation is the gold standard for the treatment of spinal diseases. However, many studies have reported the issue of loosening pedicle ...

an-anesthesia-surgery-harvest-method-for-evaluation-transpedicular

Research

Education

JoVE Core

JoVE Journal

Pharmacology

Medicine

Unit 1

An Anesthesia, Surgery, and Harvest Method for the Evaluation of Transpedicular Screws Using an In Vivo Porcine Lumbar Spine Model

Local Anesthetics

SCIENTISTS IN ACTION

7.6K Aufrufe.  Chonbuk National University School of Medicine, Chonbuk National University Hospital.  Hier stellen wir eine Methode vor, um transpedikuläre Schrauben unter Verwendung eines In-vivo- Schweine-Lendenwirbelsystems zu bewerten. 

Serie: An Anesthesia, Surgery, and Harvest Method for the Evaluation of Transpedicular Screws Using an In Vivo Porcine Lumbar Spine Model

Using Quantitative Real-time PCR to Determine Donor Cell Engraftment in a Competitive Murine Bone Marrow Transplantation Model

Murine bone marrow transplantation models provide an important tool in measuring hematopoietic stem cell (HSC) functions and determining genes/molecules that regulate HSCs. In these transplant model systems, the function of HSCs is determined by the ability of these cells to engraft and reconstitute lethally irradiated recipient mice. Commonly, the donor cell contribution/engraftment is measured by antibodies to donor- specific cell surface proteins using flow cytometry. However, this method heavily depends on the specificity and the ability of the cell surface marker to differentiate donor-derived cells from recipient-originated cells, which may not be available for all mouse strains. Considering the various backgrounds of genetically modified mouse strains in the market, this cell surface/ flow cytometry-based method has significant limitations especially in mouse strains that lack well-defined surface markers to separate donor cells from congenic recipient cells. Here, we reported a PCR-based technique to determine donor cell engraftment/contribution in transplant recipient mice. We transplanted male donor bone marrow HSCs to lethally irradiated congenic female mice. Peripheral blood samples were collected at different time points post transplantation. Bone marrow samples were obtained at the end of the experiments. Genomic DNA was isolated and the Y chromosome specific gene, Zfy1, was amplified using quantitative Real time PCR. The engraftment of male donor-derived cells in the female recipient mice was calculated against standard curve with known percentage of male vs. female DNAs. Bcl2 was used as a reference gene to normalize the total DNA amount. Our data suggested that this approach reliably determines donor cell engraftment and provides a useful, yet simple method in measuring hematopoietic cell reconstitution in murine bone marrow transplantation models. Our method can be routinely performed in most laboratories because no costly equipment such as flow cytometry is required.

Determining donor cell engraftment presents a challenge in mouse bone marrow transplant models that lack well-defined phenotypical markers. We described a methodology to quantify male donor cell engraftment in female transplant recipient mice. This method can be used in all mouse strains for the study of HSC functions.

Mittels quantitativer real-time PCR zum Donor Cell Engraftment in einem Competitive Murine Bone Marrow Transplantation Modell fest

Murine bone marrow transplantation models provide an important tool in measuring hematopoietic stem cell (HSC) functions and determining genes/molecules ...

Forschung

Medizin

An Improved Method for Rapid Intubation of the Trachea in Mice

Despite some anatomical and physiological differences, mouse models continue to be an essential tool for studying human lung disease. Bleomycin toxicity is a commonly used model to study both acute lung injury and fibrosis, and multiple methods have been developed for administering bleomycin (and other toxic agents) into the lungs. However, many of these approaches, such as transtracheal instillation, have inherent drawbacks, including the need for strong anesthetics and survival surgery. This paper reports a quick, reproducible method of intratracheal intubation that involves mild inhaled anesthesia, visualization of the trachea, and the use of a surrogate spirometer to confirm exposure. As a proof of concept, 8-12 week old C57BL/6 mice were administered either 2.0 U/kg of bleomycin or an equivalent volume of PBS, and both damage and fibrotic endpoints were measured post-exposure. This procedure allows researchers to treat a large cohort of mice in a relatively short period with little expense and minimal post-procedure care.

This article presents a rapid and simple method for administering bleomycin directly into the mouse trachea via intubation. Key advantages of this method are that it is highly reproducible, easy to master, and does not require specialized equipment or lengthy recovery times.

Ein verbessertes Verfahren zur schnellen Intubation der Luftröhre in Mice

Despite some anatomical and physiological differences, mouse models continue to be an essential tool for studying human lung disease. Bleomycin toxicity ...

Improved Method for the Establishment of an In Vitro Blood-Brain Barrier Model Based on Porcine Brain Endothelial Cells

The aim of this protocol presents an optimized procedure for the purification and cultivation of pBECs and to establish in vitro blood-brain barrier (BBB) models based on pBECs in mono-culture (MC), MC with astrocyte-conditioned medium (ACM), and non-contact co-culture (NCC) with astrocytes of porcine or rat origin. pBECs were isolated and cultured from fragments of capillaries from the brain cortices of domestic pigs 5-6 months old. These fragments were purified by careful removal of meninges, isolation and homogenization of grey matter, filtration, enzymatic digestion, and centrifugation. To further eliminate contaminating cells, the capillary fragments were cultured with puromycin-containing medium. When 60-95% confluent, pBECs growing from the capillary fragments were passaged to permeable membrane filter inserts and established in the models. To increase barrier tightness and BBB characteristic phenotype of pBECs, the cells were treated with the following differentiation factors: membrane permeant 8-CPT-cAMP (here abbreviated cAMP), hydrocortisone, and a phosphodiesterase inhibitor, RO-20-1724 (RO). The procedure was carried out over a period of 9-11 days, and when establishing the NCC model, the astrocytes were cultured 2-8 weeks in advance. Adherence to the described procedures in the protocol has allowed the establishment of endothelial layers with highly restricted paracellular permeability, with the NCC model showing an average transendothelial electrical resistance (TEER) of 1249 &#177; 80 &#937; cm2, and paracellular permeability (Papp) for Lucifer Yellow of 0.90 10-6 &#177; 0.13 10-6 cm sec-1 (mean &#177; SEM, n=55). Further evaluation of this pBEC phenotype showed good expression of the tight junctional proteins claudin 5, ZO-1, occludin and adherens junction protein p120 catenin. The model presented can be used for a range of studies of the BBB in health and disease and, with the highly restrictive paracellular permeability, this model is suitable for studies of transport and intracellular trafficking.

Improved Method for the Establishment of an In Vitro Blood-Brain Barrier Model Based on Porcine Brain Endothelial Cells

The aim of the protocol is to present an optimized procedure for the establishment of an in vitro blood-brain barrier (BBB) model based on primary porcine brain endothelial cells (pBECs). The model shows high reproducibility, high tightness, and is suitable for studies of transport and intracellular trafficking in drug discovery.

Verbesserte Methode für die Einrichtung einer In-vitro- Blut - Hirn-Schranke Modell auf porcinen Endothelzellen Gehirnzellen basiert

The aim of this protocol presents an optimized procedure for the purification and cultivation of pBECs and to establish in vitro blood-brain barrier (BBB) ...

In Vivo Evaluation of Fracture Callus Development During Bone Healing in Mice Using an MRI-compatible Osteosynthesis Device for the Mouse Femur

Endochondral fracture healing is a complex process involving the development of fibrous, cartilaginous, and osseous tissue in the fracture callus. The amount of the different tissues in the callus provides important information on the fracture healing progress. Available in vivo techniques to longitudinally monitor the callus tissue development in preclinical fracture-healing studies using small animals include digital radiography and &#181;CT imaging. However, both techniques are only able to distinguish between mineralized and non-mineralized tissue. Consequently, it is impossible to discriminate cartilage from fibrous tissue. In contrast, magnetic resonance imaging (MRI) visualizes anatomical structures based on their water content and might therefore be able to noninvasively identify soft tissue and cartilage in the fracture callus. Here, we report the use of an MRI-compatible external fixator for the mouse femur to allow MRI scans during bone regeneration in mice. The experiments demonstrated that the fixator and a custom-made mounting device allow repetitive MRI scans, thus enabling longitudinal analysis of fracture-callus tissue development.

In Vivo Evaluation of Fracture Callus Development During Bone Healing in Mice Using an MRI-compatible Osteosynthesis Device for the Mouse Femur

The evaluation of tissue development in the fracture callus during endochondral bone healing is essential to monitor the healing process. Here, we report the use of a magnetic resonance imaging (MRI)-compatible external fixator for the mouse femur to allow MRI scans during bone regeneration in mice.

In Vivo Bewertung der Fraktur Kallus Entwicklung während der Knochenheilung bei Mäusen mit einem MRI-kompatiblen Osteosynthese Gerät für Maus Femur

Endochondral fracture healing is a complex process involving the development of fibrous, cartilaginous, and osseous tissue in the fracture callus. The ...

A Pre-Clinical Porcine Model of Orthotopic Heart Transplantation

Fifty-years following the first successful report, cardiac transplantation remains the gold-standard treatment for eligible patients with advanced heart failure. Multiple small-animal models of heart transplantation have been used to study the acute and long-term effects of novel therapies. However, few are tested and demonstrated success in clinical trials. It is of critical importance to evaluate new therapies in a clinically relevant large-animal model for efficient and reliable translation of basic studies&#39;&#160;findings. Here, we describe a pre-clinical large-animal (porcine) model of orthotopic heart transplantation that has been firmly established and previously used to investigate novel cardioprotective strategies. This procedure focuses on acute ischemia-reperfusion injury and is a reliable method to investigate novel interventions which have been tested and validated in smaller experimental models, such as the murine model. We demonstrate its usefulness in assessing cardiac performance during the early post-transplantation period and other potential possibilities enabled by the model.

Here, we describe a pre-clinical large-animal (porcine) model of orthotopic heart transplantation that has been firmly established and utilized to investigate novel cardioprotective strategies.

Ein präklinisches Porcine-Modell der orthotopischen Herztransplantation

Fifty-years following the first successful report, cardiac transplantation remains the gold-standard treatment for eligible patients with advanced heart ...

An In Vivo Mouse Model of Total Intravenous Anesthesia During Cancer Resection Surgery

Anesthesia is a routine component of cancer care that is used for diagnostic and therapeutic procedures. The anesthetic technique has recently been implicated in impacting long-term cancer outcomes, possibly through modulation of adrenergic-inflammatory responses that impact cancer cell behavior and immune cell function. Emerging evidence suggests that propofol-based total intravenous anesthesia (TIVA) may be beneficial for long-term cancer outcomes when compared to inhaled volatile anesthesia. However, the available clinical findings are inconsistent. Preclinical studies that identify the underlying mechanisms involved are critically needed to guide the design of clinical studies that will expedite insight. Most preclinical models of anesthesia have been extrapolated from the use of anesthesia in in vivo research and are not optimally designed to study the impact of anesthesia itself as the primary endpoint. This paper describes a method for delivering propofol-TIVA anesthesia in a mouse model of breast cancer resection that replicates key aspects of clinical delivery in cancer patients. The model can be used to study mechanisms of action of anesthesia on cancer outcomes in diverse cancer types and can be extrapolated to other non-cancer areas of preclinical anesthesia research.

An In Vivo Mouse Model of Total Intravenous Anesthesia During Cancer Resection Surgery

This paper describes a method for modeling total intravenous anesthesia (TIVA) during cancer resection surgery in mice. The goal is to replicate key features of anesthesia delivery to patients with cancer. The method allows investigation of how anesthetic technique affects cancer recurrence after resection surgery.

Ein In-vivo-Mausmodell der intravenösen Vollnarkose während der Krebsresektion

Anesthesia is a routine component of cancer care that is used for diagnostic and therapeutic procedures. The anesthetic technique has recently been ...

Establishment and Evaluation of a Porcine Vein Graft Disease Model

Venous graft disease (VGD) is the leading cause of coronary artery bypass graft (CABG) failure. Large animal models of CABG-VGD are needed for the investigation of disease mechanisms and the development of therapeutic strategies. 
To perform the surgery, we enter the cardiac chamber through the third intercostal space and carefully dissect the internal mammary vein and immerse it in normal saline. The right main coronary artery is then treated for ischemia. The target vessel is incised, a shunt plug is placed, and the distal end of the graft vein is anastomosed. The ascending aorta is partially blocked, and the proximal end of the graft vein is anastomosed after perforation. The graft vein is checked for patency, and the proximal right coronary artery is ligated. 
CABG surgery is performed in minipigs to harvest the left internal mammary vein for its use as a vascular graft. Serum biochemical tests are used to evaluate the physiological status of the animals after surgery. Ultrasound examination shows that the proximal, middle, and distal end of the graft vessel are unobstructed. In the surgical model, turbulent blood flow in the graft is observed upon histological examination after the CABG surgery, and venous graft stenosis associated with intimal hyperplasia is observed in the graft. The study here provides detailed surgical procedures for the establishment of a repeatable CABG-induced VGD model.

In this protocol, novel pig vein bypass grafting was performed through a small incision in the left chest wall without cardiopulmonary bypass. A postoperative pathology study was done, which showed intimal thickening.

Etablierung und Evaluierung eines Porcine Vent Graft Disease Modells

Venous graft disease (VGD) is the leading cause of coronary artery bypass graft (CABG) failure. Large animal models of CABG-VGD are needed for the ...

3D Printing Model of a Patient's Specific Lumbar Vertebra

Selective dorsal rhizotomy (SDR) is a difficult, risky, and sophisticated operation, in which a laminectomy should not only expose an adequate surgical field of view but also protect the patient&#39;s spinal nerves from injury. Digital models play an important role in the pre-and intra-operation of SDR, because they can not only make doctors more familiar with the anatomical structure of the surgical site, but also provide precise surgical navigation coordinates for the manipulator. This study aims to create a 3D digital model of a patient-specific lumbar vertebra that can be used for planning, surgical navigation, and training of the SDR operation. The 3D printing model is also manufactured for more effective work during these processes.
Traditional orthopedic digital models rely almost entirely on computed tomography (CT) data, which is less sensitive to soft tissues. Fusion of the bone structure from CT and the neural structure from magnetic resonance imaging (MRI) is the key element for the model reconstruction in this study. The patient&#39;s specific 3D digital model is reconstructed for the real appearance of the surgical area and shows the accurate measurement of inter-structural distances and regional segmentation, which can effectively help in the preoperative planning and training of SDR. The transparent bone structure material of the 3D-printed model allows surgeons to clearly distinguish the relative relationship between the spinal nerve and the vertebral plate of the operated segment, enhancing their anatomical understanding and spatial sense of the structure. The advantages of the individualized 3D digital model and its accurate relationship between spinal nerve and bone structures make this method a good choice for preoperative planning of SDR surgery.

This study aims to create a 3D-printed model of a patient-specific lumbar vertebra, which contains both the vertebra and spinal nerve models fused from high-resolution computed tomography (HRCT) and MRI-Dixon data.

3D-Druckmodell eines patientenspezifischen Lendenwirbels

Selective dorsal rhizotomy (SDR) is a difficult, risky, and sophisticated operation, in which a laminectomy should not only expose an adequate surgical ...

3D-Rekonstruktion zur Diagnose und Behandlung von Lungenknoten

A 3D Digital Model for the Diagnosis and Treatment of Pulmonary Nodules

The three-dimensional (3D) reconstruction of pulmonary nodules using medical images has introduced new technical approaches for diagnosing and treating pulmonary nodules, and these approaches are progressively being acknowledged and adopted by physicians and patients. Nonetheless, constructing a relatively universal 3D digital model of pulmonary nodules for diagnosis and treatment is challenging due to device differences, shooting times, and nodule types. The objective of this study is to propose a new 3D digital model of pulmonary nodules that serves as a bridge between physicians and patients and is also a cutting-edge tool for pre-diagnosis and prognostic evaluation. Many AI-driven pulmonary nodule detection and recognition methods employ deep learning techniques to capture the radiological features of pulmonary nodules, and these methods can achieve a good area under-the-curve (AUC) performance. However, false positives and false negatives remain a challenge for radiologists and clinicians. The interpretation and expression of features from the perspective of pulmonary nodule classification and examination are still unsatisfactory. In this study, a method of continuous 3D reconstruction of the whole lung in horizontal and coronal positions is proposed by combining existing medical image processing technologies. Compared with other applicable methods, this method allows users to rapidly locate pulmonary nodules and identify their fundamental properties while also observing pulmonary nodules from multiple perspectives, thereby providing a more effective clinical tool for diagnosing and treating pulmonary nodules.

Autor im Rampenlicht: Ein digitales 3D-Modell für die Diagnose und Behandlung von Lungenknoten  

The objective of this study is to develop a novel 3D digital model of pulmonary nodules that serves as a communication bridge between physicians and patients and is also a cutting-edge tool for pre-diagnosis and prognostic evaluation.

Ein digitales 3D-Modell für die Diagnose und Behandlung von Lungenknoten

The three-dimensional (3D) reconstruction of pulmonary nodules using medical images has introduced new technical approaches for diagnosing and treating ...

Eine Anästhesie, Chirurgie und Ernteverfahren zur Bewertung von transpedikulären Schrauben mit einem

Zusammenfassung

Weitere Videos entdecken

Kapitel in diesem Video

Mittels quantitativer real-time PCR zum Donor Cell Engraftment in einem Competitive Murine Bone Marrow Transplantation Modell fest

Ein verbessertes Verfahren zur schnellen Intubation der Luftröhre in Mice

Verbesserte Methode für die Einrichtung einer In-vitro- Blut - Hirn-Schranke Modell auf porcinen Endothelzellen Gehirnzellen basiert

In Vivo Bewertung der Fraktur Kallus Entwicklung während der Knochenheilung bei Mäusen mit einem MRI-kompatiblen Osteosynthese Gerät für Maus Femur

Ein präklinisches Porcine-Modell der orthotopischen Herztransplantation

Ein In-vivo-Mausmodell der intravenösen Vollnarkose während der Krebsresektion

Etablierung und Evaluierung eines Porcine Vent Graft Disease Modells

3D-Druckmodell eines patientenspezifischen Lendenwirbels

Ein digitales 3D-Modell für die Diagnose und Behandlung von Lungenknoten

Ein digitales 3D-Modell für die Diagnose und Behandlung von Lungenknoten