Fabricating Cr / Au-Elektroden auf Glassubstraten Teil 1A: Wet Etch-Methode * Für die höchste Qualität Geräten sollte das Herstellungsverfahren in einer Reinraum-Umgebung ausgeführt werden oder unter Hauben mit laminarer Strömung, so dass Staub und andere Verunreinigungen wirken sich nicht auf das Muster. <ol><li> 2-Zoll von 4-Zoll-Glass Folien sind in platziert einen beheizten (80 ° C) Piranha-Lösung (5:7 H 2 O 2: H 2 SO 4) für 30 Minuten, um Verunreinigungen (insbesondere organischer) zu entfernen und anschließend gespült, DI Wasser und mit Druckluft getrocknet. </li><li> 20 nm Cr und 200 nm Au sind auf die Substrate mit einem Elektronenstrahlverdampfer hinterlegt. </li><li> Shipley 1827 positive Photoresist wird auf dem Glasträger mit einer Spincoaters (3000 rpm, 1000 rpm / s Rampe, 30 Sekunden Spin Zeit) abgelagert. </li><li> Die Substrate werden dann für 2 Minuten sanft gebrannt bei 100 ° C. </li><li> Das Muster der Maske ist der Fotolack mit Kontakt UV-Exposition für 8,4 Sekunden für insgesamt 206 mJ / cm 2 übertragen. </li><li> Wasser (1:3) für 30 Sekunden unter gutem Rühren durch eine DI-Wasser spülen gefolgt: Der Fotolack wird in Microposit MF 351 entwickelt. </li><li> Nach der Inspektion mit dem Mikroskop eine gute Entwicklung zu gewährleisten, werden die Substrate dann in Au Ätzmittel und Chrome Ätzmittel für 15 Sekunden und 30 Sekunden geätzt bzw. mit DI wäscht zwischen und nach. </li></ol> Teil 1B: Alternative Protocol - Lift-off-Methode <ol><li> 2-Zoll von 4-Zoll-Glass Folien sind in platziert einen beheizten (80 ° C) Piranha-Lösung (5:7 H2O 2: H 2 SO 4) für 30 Minuten, um Verunreinigungen (insbesondere organischer) zu entfernen und dann abgespült in DI-Wasser und mit Druckluft getrocknet. </li><li> Futurrex NR-7 1500 PY negativen Photoresist wurde auf das Substrat aufgeschleudert (2000 rpm, 1000 rpm / s Rampe, 40 Sekunden Spin Zeit). </li><li> Substrate waren weich gebacken für 1 Minute bei 150 ° C. </li><li> Kontakt UV-Exposition für 21 Sekunden (400 mJ / cm 2). </li><li> Die Substrate wurden dann auf einer Heizplatte bei 100 ° C für 1 Minute bis das Einbrennen Schritt abzuschließen platziert. </li><li> Die Entwicklung wurde für 6 Sekunden in Futurrex RD6 Entwickler durchgeführt. </li><li> 30 nm Cr und 200 nm Au werden dann auf die Substrate mit einem Elektronenstrahlverdampfer hinterlegt. </li><li> Lift-off ist, indem die Substrate in einer Aceton Ultraschallbad bis das Gold sichtbar wurde entfernt und bestätigt mit Mikroskop Beobachtung durchgeführt. </li></ol> Versuchsaufbau Teil 2: Microsphere Injektion und Beobachtung <ol><li> PDMS-Kanäle (Herstellung anderer Stelle beschrieben) werden auf das Glassubstrat mit direkter Haftung angebracht, so dass der Kanal führt über die hergestellten Elektroden. </li><li> Etwa 10 7 ml Polystyrol-Mikrokügelchen sind entweder in DI-Wasser (0,0002 S / m) oder KCl-Lösung (0,05 S / m) suspendiert. Sie werden dann, indem man den Schlauch Einlass in die Mikrosphären-Lösung und abgesaugt, um die Steckdose mit einer Spritze injiziert. </li><li> Das geladene Gerät wird dann auf dem Mikroskoptisch platziert und mit einem Signalgenerator. </li><li> Eine zeitliche Verlauf der Frequenz-Einstellungen (1 kHz bis 1 MHz) und Spannung Einstellungen (1 oder 2 V) angewendet werden, während Beobachtungen mit dem Mikroskop vorgenommen werden. </li></ol> Hinweis: Es ist wichtig, nicht die Spannung zu hoch heben oder ermöglichen die Frequenz zu bekommen zu niedrig oder die Elektrolyse von Wasser auftreten. Die genaue Spannung oder Frequenz für diese auftreten, sind abhängig von der Elektroden-Konstruktion. Unser Labor-Richtlinien sind auf Frequenzen unterhalb von 500 Hz oder Spannungen über 8 zu vermeiden V.

<ol>
	<li>Ramos, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AC+Electrokinetics:+a+review+of+forces+in+microelectrode+structures.">AC Electrokinetics: a review of forces in microelectrode structures.</a> Journal of Physics D: Applied Physics. 31, 2338-2353 (1998).</li><li>Morgan, H. y. w. e. l., Green, N. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AC+Electrokinetics:+colloids+and+nanoparticles.">AC Electrokinetics: colloids and nanoparticles.</a> , (2002).</li><li>Toner, M., Irimia, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Blood-on-a-chip.">Blood-on-a-chip.</a> Annual Review of Biomedical Engineering. 2005, 77-103 (2005).</li><li>Ahn, C. H., Choi, J. -. W., Beaucage, G., Nevin, J. H., Lee, J. -. B., Puntambekar, A., Lee, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Disposable+smart+lab+on+a+chip+for+point+of+care+clinical+diagnostics.">Disposable smart lab on a chip for point of care clinical diagnostics.</a> 282, 399-401 (1998).</li><li>Vespoorte, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+chips+for+clinical+and+forensic+analysis.">Microfluidic chips for clinical and forensic analysis.</a> Electrophoresis. 23, 677-712 (2002).</li><li>Rajaraman, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid,+low+cost+microfabrication+technologies+toward+realization+of+devices+for+dielectrophoretic+manipulation+of+particles+and+nanowires.">Rapid, low cost microfabrication technologies toward realization of devices for dielectrophoretic manipulation of particles and nanowires.</a> Sensors and Actuators B: Chemical. 114, 392-401 (2006).</li><li>Ali, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lab-on-a-chip+for+terrorist+weapons+management.">Lab-on-a-chip for terrorist weapons management.</a> Measurement and Control. 38, 87-91 (2005).</li><li>Voldman, J. o. e. l., Rosenthal, A. d. a. m. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dielectrophoretic+Traps+for+Single-particle+Patterning.">Dielectrophoretic Traps for Single-particle Patterning.</a> Biophysical Journal. 88, 2193-2205 (2005).</li><li>Ramachandran, T. R., Baur, C., Bugacov, A., Madhukar, A., Koel, B. E., Requicha, A., Gazen, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+and+controlled+manipulation+of+nanometer-sized+particles+using+the+non-contact+atomic+force+microscope.">Direct and controlled manipulation of nanometer-sized particles using the non-contact atomic force microscope.</a> Nanotechnology. 9, 237-245 (1998).</li><li>Sigurdson, M. a. r. i. n., Wang, D., Meinhart, C. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrothermal+stirring+for+heterogeneous+immunoassays.">Electrothermal stirring for heterogeneous immunoassays.</a> Lab Chip. 5, 1366-1373 (2005).</li><li>Urbanski, J. o. h. n. . P. a. u. l., Levitan, J. e. r. e. m. y. A., Bazant, M. a. r. t. i. n. Z., Thorsen, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fast+ac+electro-osmotic+micropumps+with+non-planar+electrodes.">Fast ac electro-osmotic micropumps with non-planar electrodes.</a> Appl. Phys. Lett. 89, 143508 (2006).</li><li>Fatoyinbo, H. O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+integrated+dielectrophoretic+quartz+crystal+microbalance+(DEP-QCM)+device+for+rapid+biosensing+applications.">An integrated dielectrophoretic quartz crystal microbalance (DEP-QCM) device for rapid biosensing applications.</a> Biosens Bioelectron. 23, 225-232 (2007).</li></ol>

In diesem Video haben wir eine Vielzahl von Teilchen und Flüssigkeit Manipulation Verhaltensweisen von AC elektrokinetische Phänomene verursacht wurden. Die Elektroden, die diese Phänomene erzeugen, die einfach herzustellen und können leicht in viele andere Systeme integriert werden. Wie wir gezeigt haben, gibt es zahlreiche Anwendungen für den Einsatz von AC Elektrokinetik. Die Vielseitigkeit dieser Geräte, sowie die schnelle Art der Manipulation, macht sie besonders attraktiv. Wie im Gesundheitswesen und anderen Branchen zu Lab-on-a...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>2" by 4" Pyrex Glass Slide</td>
<td>Substrate</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>Pyrex 7740</td>
</tr>
<tr>
<td>chrome mask</td>
<td>material</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>This photomask will have the microelectrode patterns on them and can be ordered from a variety of microfabrication centers.</td>
</tr>
<tr>
<td>PDMS Microchannels</td>
<td>material</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>These may be fabricated and used in-house or a simple microscope slide will suffice.</td>
</tr>
<tr>
<td>Hydrogen Peroxide 30%</td>
<td>Reagent</td>
<td>Fisher Scientific</td>
<td>7722-84-1</td>
<td>Certified ACS, Fisher Scientific</td>
</tr>
<tr>
<td>Sulfuric Acid</td>
<td>Reagent</td>
<td>Fisher Scientific</td>
<td>A300-212</td>
<td>Certified ACS Plus</td>
</tr>
<tr>
<td>Acetone Electronic Grade</td>
<td>Reagent</td>
<td>Fisher Scientific</td>
<td>A946-4</td>
<td>&nbsp;</td>
<tr>
<td>Shipley 1827 Positive Photoresist</td>
<td>Reagent</td>
<td>Microchem Inc.</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Shipley 351 Developer</td>
<td>Reagent</td>
<td>Microchem Inc.</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Gold Etchant</td>
<td>Reagent</td>
<td>Transene Company, Inc.</td>
<td>Type TFA</td>
<td>&nbsp;</td>
<tr>
<td>Chrome Photomask Etchant</td>
<td>Reagent</td>
<td>Cyantek Corporation</td>
<td>CR-7S</td>
<td>&nbsp;</td>
<tr>
<td>NR-7 1500 PY Negative Resist</td>
<td>Reagent</td>
<td>Futurrex</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>RD6 Developer</td>
<td>Reagent</td>
<td>Futurrex</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

ac electrokinetic phenomena generated by microelectrode structures

Der Bereich der AC Elektrokinetik wächst schnell aufgrund seiner Fähigkeit, dynamische Fluid-und Partikel-Manipulation auf der Mikro-und Nanobereich, die wesentlich für Lab-on-a-Chip Anwendungen auszuführen. AC elektrokinetischen Phänomenen Gebrauch elektrischer Felder, um Kräfte zu erzeugen, die wirken auf Flüssigkeiten oder Schwebeteilchen (einschließlich der dielektrischen oder biologischen Material) und sie in erstaunlicher Weise 1, 2 bewegen verursachen. Innerhalb eines einzelnen Kanals kann AC Elektrokinetik erreichen viele wichtige On-Chip-Operationen, wie aktiv Mikrovermischung, Partikelabscheidung, Partikel-Positionierung und Mikro-Musterung. Ein einzelnes Gerät kann mehrere dieser Operationen, indem einfach Betriebsparameter wie Frequenz oder Amplitude der angelegten Spannung zu erreichen. Geeignete elektrische Felder können leicht durch Mikroelektroden in Mikrokanäle integriert erstellt werden. Es ist klar, aus der ein enormes Wachstum in diesem Bereich, dass AC Elektrokinetik wird wahrscheinlich eine tiefgreifende Wirkung auf Healthcare Diagnostics 3-5, Umweltüberwachung 6 und Heimat Security 7. Im Allgemeinen gibt es drei AC elektrokinetische Phänomene (AC Elektroosmose, Dielektrophorese und AC elektrothermischen Effekt) jedes mit einzigartigen Abhängigkeiten der Betriebsparameter. Eine Veränderung dieser Betriebsparameter kann verursachen ein Phänomen zu dominant werden über einen anderen, wodurch sich die Partikel oder Flüssigkeit Verhalten. Es ist schwierig, das Verhalten von Partikeln und Flüssigkeiten aufgrund der komplizierten Physik, AC Elektrokinetik unterliegen vorherzusagen. Es ist das Ziel dieser Publikation, die Physik zu erklären und erläutern Partikel-und Fluid-Verhalten. Unsere Analyse deckt auch, wie man die Elektrode Strukturen, die sie erzeugen, herzustellen, und wie man eine Vielzahl von experimentellen Beobachtungen über mehrere populäre Gerät Designs zu interpretieren. Dieses Video Artikel hilft Wissenschaftler und Ingenieure verstehen diese Phänomene und können sie ermutigen, zu verwenden zu beginnen AC Elektrokinetik in ihre Forschung.

Watch this Scientific Journal Video about AC Electrokinetic Phenomena Generated by Microelectrode Structures at JoVE.com

AC Electrokinetic Phenomena Generated by Microelectrode Structures

Manipulieren von Flüssigkeiten und Schwebstoffe in der Mikro-und Nano-Maßstab wird immer mehr zu einer Realität als enabling technologies, wie AC Elektrokinetik, weiter zu entwickeln. Hier diskutieren wir die Physik hinter AC Elektrokinetik, wie man diese Geräte und wie man die experimentellen Beobachtungen zu interpretieren herzustellen.

AC elektrokinetischen Phänomenen von Mikroelektroden-Strukturen erzeugt

The field of AC electrokinetics is rapidly growing due to its ability to perform dynamic fluid and particle manipulation on the micro- and nano-scale, ...

ac-electrokinetic-phenomena-generated-by-microelectrode-structures

Research

JoVE Journal

Biology

11.4K Aufrufe.  Drexel University. Manipulieren von Flüssigkeiten und Schwebstoffe in der Mikro-und Nano-Maßstab wird immer mehr zu einer Realität als enabling technologies, wie AC Elektrokinetik, weiter zu entwickeln. Hier diskutieren wir die Physik hinter AC Elektrokinetik, wie man diese Geräte und wie man die experimentellen Beobachtungen zu interpretieren herzustellen.

Serie: AC Electrokinetic Phenomena Generated by Microelectrode Structures

Computer-Generated Animal Model Stimuli

Communication between animals is diverse and complex. Animals may communicate using auditory, seismic, chemosensory, electrical, or visual signals. In particular, understanding the constraints on visual signal design for communication has been of great interest. Traditional methods for investigating animal interactions have used basic observational techniques, staged encounters, or physical manipulation of morphology. Less intrusive methods have tried to simulate conspecifics using crude playback tools, such as mirrors, still images, or models. As technology has become more advanced, video playback has emerged as another tool in which to examine visual communication (Rosenthal, 2000). However, to move one step further, the application of computer-animation now allows researchers to specifically isolate critical components necessary to elicit social responses from conspecifics, and manipulate these features to control interactions. Here, I provide detail on how to create an animation using the Jacky dragon as a model, but this process may be adaptable for other species. In building the animation, I elected to use Lightwave  3D to alter object morphology, add texture, install bones, and provide comparable weight shading that prevents exaggerated movement. The animation is then matched to select motor patterns to replicate critical movement features. Finally, the sequence must rendered into an individual clip for presentation. Although there are other adaptable techniques, this particular method had been demonstrated to be effective in eliciting both conspicuous and social responses in staged interactions.

Computer-generated stimuli using the Jacky dragon as a model.

Computer-Generated-Tiermodell Stimuli

Communication between animals is diverse and complex. Animals may communicate using auditory, seismic, chemosensory, electrical, or visual signals. In ...

Forschung

Biologie

Fluorescent Labeling of Drosophila Heart Structures

The Drosophila melanogaster dorsal vessel, or heart, is a tubular structure comprised of a single layer of contractile cardiomyocytes, pericardial cells that align along each side of the heart wall, supportive alary muscles and, in adults, a layer of ventral longitudinal muscle cells. The contractile fibers house conserved constituents of the muscle cytoarchitecture including densely packed bundles of myofibrils and cytoskeletal/submembranous protein complexes, which interact with homologous components of the extracellular matrix. Here we describe a protocol for the fixation and the fluorescent labeling of particular myocardial elements from the hearts of dissected larvae and semi-intact adult Drosophila. Specifically, we demonstrate the labeling of sarcomeric F-actin and of &alpha;-actinin in larval hearts. Additionally, we perform labeling of F-actin and &alpha;-actinin in myosin-GFP expressing adult flies and of &alpha;-actinin and pericardin, a type IV extracellular matrix collagen, in wild type adult hearts. Particular attention is given to a mounting strategy for semi-intact adult hearts that minimizes handling and optimizes the opportunity for maintaining the integrity of the cardiac tubes and the associated tissues. These preparations are suitable for imaging via fluorescent and confocal microscopy. Overall, this procedure allows for careful and detailed analysis of the structural characteristics of the heart from a powerful genetically tractable model system.

Fluorescent Labeling of Drosophila Heart Structures

Here we describe a basic protocol for fluorescent labeling of different elements of heart tubes from larva and adult Drosophila melanogaster. These specimens are well-suited for imaging via fluorescent or confocal microscopy. This technique permits detailed structural analysis of the features of the hearts from a powerful model organism.

Fluoreszenzmarkierung Drosophila Herz Structures

The Drosophila melanogaster dorsal vessel, or heart, is a tubular structure comprised of a single layer of contractile cardiomyocytes, pericardial cells ...

Visualization of Caenorhabditis elegans Cuticular Structures Using the Lipophilic Vital Dye DiI

The cuticle of C. elegans is a highly resistant structure that surrounds the exterior of the animal1-4. The cuticle not only protects the animal from the environment, but also determines body shape and plays a role in motility4-6. Several layers secreted by epidermal cells comprise the cuticle, including an outermost lipid layer7.
Circumferential ridges in the cuticle called annuli pattern the length of the animal and are present during all stages of development8. Alae are longitudinal ridges that are present during specific stages of development, including L1, dauer, and adult stages2,9. Mutations in genes that affect cuticular collagen organization can alter cuticular structure and animal body morphology5,6,10,11. While cuticular imaging using compound microscopy with DIC optics is possible, current methods that highlight cuticular structures include fluorescent transgene expression12, antibody staining13, and electron microscopy1. Labeled wheat germ agglutinin (WGA) has also been used to visualize cuticular glycoproteins, but is limited in resolving finer cuticular structures14. Staining of cuticular surface using fluorescent dye has been observed, but never characterized in detail15. We present a method to visualize cuticle in live C. elegans using the red fluorescent lipophilic dye DiI (1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate), which is commonly used in C. elegans to visualize environmentally exposed neurons. This optimized protocol for DiI staining is a simple, robust method for high resolution fluorescent visualization of annuli, alae, vulva, male tail, and hermaphrodite tail spike in C. elegans.

Visualization of Caenorhabditis elegans Cuticular Structures Using the Lipophilic Vital Dye DiI

We present a method to visualize cuticle in live C. elegans using the red fluorescent lipophilic dye DiI (1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate), which is commonly used in C. elegans to visualize environmentally exposed neurons. With this optimized protocol, alae and annular cuticular structures are stained by DiI and observed using compound microscopy.

Visualisierung von Caenorhabditis elegans Cuticle Strukturen mit der lipophilen Vital Dye, DiI

The cuticle of C. elegans is a highly resistant structure that surrounds the exterior of the animal1-4. The cuticle not only protects the animal from the ...

Analyzing and Building Nucleic Acid Structures with 3DNA

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic acid structures. This article presents detailed protocols for a subset of new and popular features available in 3DNA, applicable to both individual structures and ensembles of related structures. Protocol 1 lists the set of instructions needed to download and install the software. This is followed, in Protocol 2, by the analysis of a nucleic acid structure, including the assignment of base pairs and the determination of rigid-body parameters that describe the structure and, in Protocol 3, by a description of the reconstruction of an atomic model of a structure from its rigid-body parameters. The most recent version of 3DNA, version 2.1, has new features for the analysis and manipulation of ensembles of structures, such as those deduced from nuclear magnetic resonance (NMR) measurements and molecular dynamic (MD) simulations; these features are presented in Protocols 4 and 5. In addition to the 3DNA stand-alone software package, the w3DNA web server, located at <a href="http://w3dna.rutgers.edu" target="_blank">http://w3dna.rutgers.edu</a>, provides a user-friendly interface to selected features of the software. Protocol 6 demonstrates a novel feature of the site for building models of long DNA molecules decorated with bound proteins at user-specified locations.

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic acid structures. This article presents detailed protocols for a subset of new and popular features available in 3DNA, applicable to both individual structures and ensembles of related structures.

Analysieren und Bauen Nukleinsäurestrukturen mit 3DNA

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic ...

Analysis of Gene Function and Visualization of Cilia-Generated Fluid Flow in Kupffer's Vesicle

Internal organs such as the heart, brain, and gut develop left-right (LR) asymmetries that are critical for their normal functions1. Motile cilia are involved in establishing LR asymmetry in vertebrate embryos, including mouse, frog, and zebrafish2-6. These 'LR cilia' generate asymmetric fluid flow that is necessary to trigger a conserved asymmetric Nodal (TGF-&beta; superfamily) signaling cascade in the left lateral plate mesoderm, which is thought to provide LR patterning information for developing organs7. Thus, to understand mechanisms underlying LR patterning, it is essential to identify genes that regulate the organization of LR ciliated cells, the motility and length of LR cilia and their ability to generate robust asymmetric flow.
In the zebrafish embryo, LR cilia are located in Kupffer's vesicle (KV)2,4,5. KV is comprised of a single layer of monociliated epithelial cells that enclose a fluid-filled lumen. Fate mapping has shown that KV is derived from a group of ~20-30 cells known as dorsal forerunner cells (DFCs) that migrate at the dorsal blastoderm margin during epiboly stages8,9. During early somite stages, DFCs cluster and differentiate into ciliated epithelial cells to form KV in the tailbud of the embryo10,11. The ability to identify and track DFCs&mdash;in combination with optical transparency and rapid development of the zebrafish embryo&mdash;make zebrafish KV an excellent model system to study LR ciliated cells.
Interestingly, progenitors of the DFC/KV cell lineage retain cytoplasmic bridges between the yolk cell up to 4 hr post-fertilization (hpf), whereas cytoplasmic bridges between the yolk cell and other embryonic cells close after 2 hpf8. Taking advantage of these cytoplasmic bridges, we developed a stage-specific injection strategy to deliver morpholino oligonucleotides (MO) exclusively to DFCs and knockdown the function of a targeted gene in these cells12. This technique creates chimeric embryos in which gene function is knocked down in the DFC/KV lineage developing in the context of a wild-type embryo. To analyze asymmetric fluid flow in KV, we inject fluorescent microbeads into the KV lumen and record bead movement using videomicroscopy2. Fluid flow is easily visualized and can be quantified by tracking bead displacement over time.
Here, using the stage-specific DFC-targeted gene knockdown technique and injection of fluorescent microbeads into KV to visualize flow, we present a protocol that provides an effective approach to characterize the role of a particular gene during KV development and function.

Analysis of Gene Function and Visualization of Cilia-Generated Fluid Flow in Kupffer&#039;s Vesicle

Cilia-generated fluid flow in Kupffer&#x2019;s Vesicle (KV) controls left-right patterning of the zebrafish embryo. Here, we describe a technique to modulate gene function specifically in KV cells. In addition, we show how to deliver fluorescent beads into KV to visualize fluid flow.

Analyse der Genfunktion und Visualisierung von Cilia-Generated Fluid Flow in Kupffer-Vesicle

Internal organs such as the  heart, brain, and gut develop left-right (LR) asymmetries that are critical for  their normal functions1. Motile cilia are ...

Imaging and 3D Reconstruction of Cerebrovascular Structures in Embryonic Zebrafish

Zebrafish are a powerful tool to study developmental biology and pathology in vivo. The small size and relative transparency of zebrafish embryos make them particularly useful for the visual examination of processes such as heart and vascular development. In several recent studies transgenic zebrafish that express EGFP in vascular endothelial cells were used to image and analyze complex vascular networks in the brain and retina, using confocal microscopy. Descriptions are provided to prepare, treat and image zebrafish embryos that express enhanced green fluorescent protein (EGFP), and then generate comprehensive 3D renderings of the cerebrovascular system. Protocols include the treatment of embryos, confocal imaging, and fixation protocols that preserve EGFP fluorescence. Further, useful tips on obtaining high-quality images of cerebrovascular structures, such as removal the eye without damaging nearby neural tissue are provided. Potential pitfalls with confocal imaging are discussed, along with the steps necessary to generate 3D reconstructions from confocal image stacks using freely available open source software.

Imaging of cerebrovascular development in larval zebrafish is described. Techniques to facilitate 3D imaging and modify cerebrovascular development using chemical treatments are also provided.

Imaging und 3D-Rekonstruktion der zerebrovaskuläre Strukturen in embryonalen Zebrafisch

Zebrafish are a powerful tool to study developmental biology and pathology in vivo.  The small size and relative transparency of zebrafish embryos make ...

Intravital Microscopy for Imaging Subcellular Structures in Live Mice Expressing Fluorescent Proteins

Here we describe a procedure to image subcellular structures in live rodents that is based on the use of confocal intravital microscopy. As a model organ, we use the salivary glands of live mice since they provide several advantages. First, they can be easily exposed to enable access to the optics, and stabilized to facilitate the reduction of the motion artifacts due to heartbeat and respiration. This significantly facilitates imaging and tracking small subcellular structures. Second, most of the cell populations of the salivary glands are accessible from the surface of the organ. This permits the use of confocal microscopy that has a higher spatial resolution than other techniques that have been used for in vivo imaging, such as two-photon microscopy. Finally, salivary glands can be easily manipulated pharmacologically and genetically, thus providing a robust system to investigate biological processes at a molecular level.
In this study we focus on a protocol designed to follow the kinetics of the exocytosis of secretory granules in acinar cells and the dynamics of the apical plasma membrane where the secretory granules fuse upon stimulation of the beta-adrenergic receptors. Specifically, we used a transgenic mouse that co-expresses cytosolic GFP and a membrane-targeted peptide fused with the fluorescent protein tandem-Tomato. However, the procedures that we used to stabilize and image the salivary glands can be extended to other mouse models and coupled to other approaches to label in vivo cellular components, enabling the visualization of various subcellular structures, such as endosomes, lysosomes, mitochondria, and the actin cytoskeleton.

Intravital microscopy is a powerful tool that enables imaging various biological processes in live animals. In this article, we present a detailed method for imaging the dynamics of subcellular structures, such as the secretory granules, in the salivary glands of live mice.

Intravitalmikroskopie zur Imaging subzellulärer Strukturen in lebenden Mäusen Ausdruck Fluoreszierende Proteine

Here we describe a procedure to image subcellular structures in live rodents that is based on the use of confocal intravital microscopy. As a model organ, ...

Simultaneous Multicolor Imaging of Biological Structures with Fluorescence Photoactivation Localization Microscopy

Localization-based super resolution microscopy can be applied to obtain a spatial map (image) of the distribution of individual fluorescently labeled single molecules within a sample with a spatial resolution of tens of nanometers. Using either photoactivatable (PAFP) or&#160;photoswitchable (PSFP) fluorescent proteins fused to proteins of interest, or organic dyes conjugated to antibodies or other molecules of interest, fluorescence photoactivation localization microscopy (FPALM) can simultaneously image multiple species of molecules within single cells. By using the following approach, populations of large numbers (thousands to hundreds of thousands) of individual molecules are imaged in single cells and localized with a precision of ~10-30 nm. Data obtained can be applied to understanding the nanoscale spatial distributions of multiple protein types within a cell. One primary advantage of this technique is the dramatic increase in spatial resolution: while diffraction limits resolution to ~200-250 nm in conventional light microscopy, FPALM can image length scales more than an order of magnitude smaller. As many biological hypotheses concern the spatial relationships among different biomolecules, the improved resolution of FPALM can provide insight into questions of cellular organization which have previously been inaccessible to conventional fluorescence microscopy. In addition to detailing the methods for sample preparation and data acquisition, we here describe the optical setup for FPALM. One additional consideration for researchers wishing to do super-resolution microscopy is cost: in-house setups are significantly cheaper than most commercially available imaging machines. Limitations of this technique include the need for optimizing the labeling of molecules of interest within cell samples, and the need for post-processing software to visualize results. We here describe the use of PAFP and PSFP expression to image two protein species in fixed cells. Extension of the technique to living cells is also described.

We demonstrate the use of fluorescence photo activation localization microscopy (FPALM) to simultaneously image multiple types of fluorescently labeled molecules&#160;within cells. The techniques described yield the localization of thousands to hundreds of thousands of individual fluorescent labeled proteins, with a precision of tens of nanometers&#160;within single cells.

Simultane Multicolor-Imaging biologischer Strukturen mit Fluoreszenzphotoaktivierung Lokalisationsmikroskopie

Localization-based super resolution microscopy can be applied to obtain a spatial map (image) of the distribution of individual fluorescently labeled ...

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

Through a delicate balance between quiescence and proliferation, self renewal and production of differentiated progeny, hematopoietic stem cells (HSCs) maintain the turnover of all mature blood cell lineages. The coordination of the complex signals leading to specific HSC fates relies upon the interaction between HSCs and the intricate bone marrow microenvironment, which is still poorly understood[1-2].
We describe how by combining a newly developed specimen holder for stable animal positioning with multi-step confocal and two-photon in vivo imaging techniques, it is possible to obtain high-resolution 3D stacks containing HSPCs and their surrounding niches and to monitor them over time through multi-point time-lapse imaging. High definition imaging allows detecting ex vivo labeled hematopoietic stem and progenitor cells (HSPCs) residing within the bone marrow. Moreover, multi-point time-lapse 3D imaging, obtained with faster acquisition settings, provides accurate information about HSPC movement and the reciprocal interactions between HSPCs and stroma cells.
Tracking of HSPCs in relation to GFP positive osteoblastic cells is shown as an exemplary application of this method. This technique can be utilized to track any appropriately labeled hematopoietic or stromal cell of interest within the mouse calvarium bone marrow space.

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

The nature of the interactions between hematopoietic stem and progenitor cells (HSPCs) and bone marrow niches is poorly understood. Custom hardware modifications and a multi-step acquisition protocol allow the use of two-photon and confocal microscopy to image ex vivo labeled HSPCs homed within bone marrow areas, tracking interactions and movement.

In-vivo-4-Dimensional-Tracking von hämatopoetischen Stamm-und Vorläuferzellen im erwachsenen Maus Schädeldachknochenmark

Through a delicate balance between quiescence and proliferation, self renewal and production of differentiated progeny, hematopoietic stem cells (HSCs) ...

Measurement of Extracellular Ion Fluxes Using the Ion-selective Self-referencing Microelectrode Technique

Cells from animals, plants and single cells are enclosed by a barrier called the cell membrane that separates the cytoplasm from the outside. Cell layers such as epithelia also form a barrier that separates the inside from the outside or different compartments of multicellular organisms. A key feature of these barriers is the differential distribution of ions across cell membranes or cell layers. Two properties allow this distribution: 1) membranes and epithelia display selective permeability to specific ions; 2) ions are transported through pumps across cell membranes and cell layers. These properties play crucial roles in maintaining tissue physiology and act as signaling cues after damage, during repair, or under pathological condition. The ion-selective self-referencing microelectrode allows measurements of specific fluxes of ions such as calcium, potassium or sodium at single cell and tissue levels. The microelectrode contains an ionophore cocktail which is selectively permeable to a specific ion. The internal filling solution contains a set concentration of the ion of interest. The electric potential of the microelectrode is determined by the outside concentration of the ion. As the ion concentration varies, the potential of the microelectrode changes as a function of the log of the ion activity. When moved back and forth near a source or sink of the ion (i.e. in a concentration gradient due to ion flux) the microelectrode potential fluctuates at an amplitude proportional to the ion flux/gradient. The amplifier amplifies the microelectrode signal and the output is recorded on computer. The ion flux can then be calculated by Fick&#8217;s law of diffusion using the electrode potential fluctuation, the excursion of microelectrode, and other parameters such as the specific ion mobility. In this paper, we describe in detail the methodology to measure extracellular ion fluxes using the ion-selective self-referencing microelectrode and present some representative results.

Transporters in cell membranes allow differential segregation of ions across cell membranes or cell layers and play crucial roles during tissue physiology, repair and pathology. We describe the ion-selective self-referencing microelectrode that allows the measurement of specific ion fluxes at single cells and tissues in vivo.

Die Messung der extrazellulären Ionenflüsse Verwendung der ionenselektiven selbst verweisMikroElektroden-Technik

Cells from animals, plants and single cells are enclosed by a barrier called the cell membrane that separates the cytoplasm from the outside. Cell layers ...