Por favor, visite <a href="http://springerprotocols.com/index.vm">Protocolos Springer</a> para obtener más información sobre la preparación de bicapas artificiales y el uso de canales de gramicidina para probar la elasticidad de la membrana.

The authors have nothing to disclose.

single molecule methods for monitoring changes in bilayer elastic properties

Función de la membrana de proteínas está regulada por la composición lipídica de la membrana celular. Esta regulación se debe a una combinación específica de interacciones lípido-proteína y las interacciones lípido más general de proteínas bicapa. Estas interacciones son especialmente importantes en la investigación farmacológica, ya que muchos fármacos actuales en el mercado puede alterar las propiedades del material de bicapa lipídica, que puede conducir a la alteración de la función de proteínas de membrana. La formación de canales de gramicidina dependen de los cambios conformacionales en las subunidades gramicidina que a su vez depende de las propiedades de los lípidos. Por lo tanto, el actual canal de gramicidina es un reportero de las propiedades de alteración de la bicapa, debido a ciertos compuestos.

Watch this Scientific Journal Video about Single Molecule Methods for Monitoring Changes in Bilayer Elastic Properties at JoVE.com

Single Molecule Methods for Monitoring Changes in Bilayer Elastic Properties

Función de la membrana de proteínas está regulada por la composición lipídica de la membrana celular. Este artículo detalla cómo video-para formar un parche a través de electrodos de dos capas de parches, así como el uso de canales de gramicidina como reporteros de propiedades de la membrana alterado.

Métodos de una sola molécula para vigilar los cambios en las propiedades elásticas bicapa

Membrane protein function is regulated by the cell membrane lipid composition.  This regulation is due to a combination of specific lipid-protein ...

single-molecule-methods-for-monitoring-changes-bilayer-elastic

Research

JoVE Journal

Biology

9.3K vistas.  Weill Cornell Medical College. Función de la membrana de proteínas está regulada por la composición lipídica de la membrana celular. Este artículo detalla cómo video-para formar un parche a través de electrodos de dos capas de parches, así como el uso de canales de gramicidina como reporteros de propiedades de la membrana alterado.

Video: Single Molecule Methods for Monitoring Changes in Bilayer Elastic Properties

Visualizing Single-molecule DNA Replication with Fluorescence Microscopy

We describe a simple fluorescence microscopy-based real-time method for observing DNA replication at the single-molecule level. A circular, forked DNA template is attached to a functionalized glass coverslip and replicated extensively after introduction of replication proteins and nucleotides (Figure 1). The growing product double-strand DNA (dsDNA) is extended with laminar flow and visualized by using an intercalating dye. Measuring the position of the growing DNA end in real time allows precise determination of replication rate (Figure 2). Furthermore, the length of completed DNA products reports on the processivity of replication. This experiment can be performed very easily and rapidly and requires only a fluorescence microscope with a reasonably sensitive camera.


This protocol demonstrates a simple single-molecule fluorescence microscopy technique for visualizing DNA replication by individual replisomes in real time.

Visualización de una sola molécula de ADN de replicación con microscopía de fluorescencia

We describe a simple fluorescence microscopy-based real-time method for observing DNA replication at the single-molecule level. A circular, forked DNA ...

Investigación

Biología

Automated System for Single Molecule Fluorescence Measurements of Surface-immobilized Biomolecules

Fluorescence Resonance Energy Transfer (FRET) microscopy has been widely used to study the structure and dynamics of molecules of biological interest, such as nucleic acids and proteins. Single molecule FRET (sm-FRET) measurements on immobilized molecules permit long observations of the system -effectively until both dyes photobleach- resulting in time-traces that report on biomolecular dynamics with a broad range of timescales from milliseconds to minutes. To facilitate the acquisition of large number of traces for statistical analyses, the process must be automated and the sample environment should be tightly controlled over the entire measurement time (~12 hours). This is accomplished using an automated scanning confocal microscope that allows the interrogation of thousands of single molecules overnight, and a microfluidic cell that permits the controlled exchange of buffer, with restricted oxygen content and maintains a constant temperature throughout the entire measuring period. Here we show how to assemble the microfluidic device and how to activate its surface for DNA immobilization. Then we explain how to prepare a buffer to maximize the photostability and lifetime of the fluorophores. Finally, we show the steps involved in preparing the setup for the automated acquisition of time-resolved single molecule FRET traces of DNA molecules.

In this article we describe how we obtain FRET traces from individual DNA molecules immobilized to a surface using an automated scanning confocal microscope.

Sistema Automatizado de Soltero mediciones de fluorescencia de la molécula de superficie inmovilizada Biomoléculas

Fluorescence Resonance Energy Transfer (FRET) microscopy has been widely used to study the structure and dynamics of molecules of biological interest, ...

Single-Molecule Imaging of Nuclear Transport

The utility of single molecule fluorescence microscopy approaches has been proven to be of a great avail in understanding biological reactions over the last decade. The investigation of molecular interactions with high temporal and spatial resolutions deep within cells has remained challenging due to the inherently weak signals arising from individual molecules. Recent works by Yang et al. demonstrated that narrow-field epifluorescence microscopy allows visualization of nucleocytoplasmic transport at the single molecule level. By the single molecule approach, important kinetics, such as nuclear transport time and efficiency, for signal-dependent and independent cargo molecules have been obtained. Here we described a protocol for the methodological approach with an improved spatiotemporal resolution of 0.4 ms and 12 nm. The improved resolution enabled us to capture transient active transport and passive diffusion events through the nuclear pore complexes (NPC) in semi-intact cells. We expect this method to be used in elucidating other binding and trafficking events within cells.

Single molecule microscopy approch provided novel insights into nuclear transport.

Imagen de una sola molécula de transporte nuclear

The utility of single molecule fluorescence microscopy approaches has been proven to be of a great avail in understanding biological reactions over the ...

Gramicidin-based Fluorescence Assay; for Determining Small Molecules Potential for Modifying Lipid Bilayer Properties

Many drugs and other small molecules used to modulate biological function are amphiphiles that adsorb at the bilayer/solution interface and thereby alter lipid bilayer properties. This is important because membrane proteins are energetically coupled to their host bilayer by hydrophobic interactions. Changes in bilayer properties thus alter membrane protein function, which provides an indirect way for amphiphiles to modulate protein function and a possible mechanism for "off-target" drug effects. We have previously developed an electrophysiological assay for detecting changes in lipid bilayer properties using linear gramicidin channels as probes 3,12. Gramicidin channels are mini-proteins formed by the transbilayer dimerization of two non-conducting subunits. They are sensitive to changes in their membrane environment, which makes them powerful probes for monitoring changes in lipid bilayer properties as sensed by bilayer spanning proteins. We now demonstrate a fluorescence assay for detecting changes in bilayer properties using the same channels as probes. The assay is based on measuring the time-course of fluorescence quenching from fluorophore-loaded large unilamellar vesicles due to the entry of a quencher through the gramicidin channels. We use the fluorescence indicator/quencher pair 8-aminonaphthalene-1,3,6-trisulfonate (ANTS)/Tl+ that has been successfully used in other fluorescence quenching assays 5,13. Tl+ permeates the lipid bilayer slowly 8 but passes readily through conducting gramicidin channels 1,14. The method is scalable and suitable for both mechanistic studies and high-throughput screening of small molecules for bilayer-perturbing, and potential "off-target", effects. We find that results using this method are in good agreement with previous electrophysiological results 12.

We introduce a fast fluorescence-based assay that monitors the rate of fluorescence quenching as a measure of gramicidin channel activity. The gramicidin channels are used as molecular force transducers to monitor changes in lipid bilayer properties as sensed by bilayer spanning proteins.

Gramicidina basado en ensayo de fluorescencia, para la determinación de moléculas pequeñas posibles para modificar las propiedades bicapa lipídica

Many drugs and other small molecules used to modulate biological function are amphiphiles that adsorb at the bilayer/solution interface and thereby alter ...

Monitoring Equilibrium Changes in RNA Structure by 'Peroxidative' and 'Oxidative' Hydroxyl Radical Footprinting

RNA molecules play an essential role in biology. In addition to transmitting genetic information, RNA can fold into unique tertiary structures fulfilling a specific biologic role as regulator, binder or catalyst. Information about tertiary contact formation is essential to understand the function of RNA molecules. Hydroxyl radicals (&bull;OH) are unique probes of the structure of nucleic acids due to their high reactivity and small size.1 When used as a footprinting probe, hydroxyl radicals map the solvent accessible surface of the phosphodiester backbone of DNA1 and RNA2 with as fine as single nucleotide resolution. Hydroxyl radical footprinting can be used to identify the nucleotides within an intermolecular contact surface, e.g. in DNA-protein1 and RNA-protein complexes. Equilibrium3 and kinetic4 transitions can be determined by conducting hydroxyl radical footprinting as a function of a solution variable or time, respectively. A key feature of footprinting is that limited exposure to the probe (e.g., 'single-hit kinetics') results in the uniform sampling of each nucleotide of the polymer.5
In this video article, we use the P4-P6 domain of the Tetrahymena ribozyme to illustrate RNA sample preparation and the determination of a Mg(II)-mediated folding isotherms. We describe the use of the well known hydroxyl radical footprinting protocol that requires H2O2 (we call this the 'peroxidative' protocol) and a valuable, but not widely known, alternative that uses naturally dissolved O2 (we call this the 'oxidative' protocol). An overview of the data reduction, transformation and analysis procedures is presented.

Monitoring Equilibrium Changes in RNA Structure by &#039;Peroxidative&#039; and &#039;Oxidative&#039; Hydroxyl Radical Footprinting

This protocol describes how to quantify the Mg(II)-dependent formation of RNA tertiary structure by two methods of hydroxyl radical footprinting.

Seguimiento de los cambios de equilibrio en la estructura del ARN por &quot;peroxidación&quot; y &quot;oxidativo&quot; Huella de radicales hidroxilo

RNA molecules play an essential role in biology. In addition to transmitting genetic information, RNA can fold into unique tertiary structures fulfilling ...

Long-term Lethal Toxicity Test with the Crustacean Artemia franciscana

Our research activities target the use of biological methods for the evaluation of environmental quality, with particular reference to saltwater/brackish water and sediment. The choice of biological indicators must be based on reliable scientific knowledge and, possibly, on the availability of standardized procedures. In this article, we present a standardized protocol that used the marine crustacean Artemia to evaluate the toxicity of chemicals and/or of marine environmental matrices. Scientists propose that the brine shrimp (Artemia) is a suitable candidate for the development of a standard bioassay for worldwide utilization. A number of papers have been published on the toxic effects of various chemicals and toxicants on brine shrimp (Artemia). The major advantage of this crustacean for toxicity studies is the overall availability of the dry cysts; these can be immediately used in testing and difficult cultivation is not demanded1,2. Cyst-based toxicity assays are cheap, continuously available, simple and reliable and are thus an important answer to routine needs of toxicity screening, for industrial monitoring requirements or for regulatory purposes3. The proposed method involves the mortality as an endpoint. The numbers of survivors were counted and percentage of deaths were calculated. Larvae were considered dead if they did not exhibit any internal or external movement during several seconds of observation4. This procedure was standardized testing a reference substance (Sodium Dodecyl Sulfate); some results are reported in this work. This article accompanies a video that describes the performance of procedural toxicity testing, showing all the steps related to the protocol.

Long-term Lethal Toxicity Test with the Crustacean Artemia franciscana

This study concerns the development and standardization of a valuable methodological protocol to determine long-term (14 days) lethal toxicity exerted by chemical substances, industrial wastewater or sewage and liquid environmental samples on the saltwater crustacean, Artemia franciscana.

A largo plazo Prueba de toxicidad letal con el Crustáceo Artemia franciscana</em

Our research activities target the use of biological methods for the evaluation of environmental quality, with particular reference to saltwater/brackish ...

AFM-based Mapping of the Elastic Properties of Cell Walls: at Tissue, Cellular, and Subcellular Resolutions

We describe a recently developed method to measure mechanical properties of the surfaces of plant tissues using atomic force microscopy (AFM) micro/nano-indentations, for a JPK&#160;AFM. Specifically, in this protocol we measure the apparent Young&#8217;s modulus of cell walls at subcellular resolutions across regions of up to 100 &#181;m&#160;x 100 &#181;m in floral meristems, hypocotyls, and roots. This requires careful preparation of the sample, the correct selection of micro-indenters and indentation depths. To account for cell wall properties only, measurements are performed in highly concentrated solutions of mannitol in order to plasmolyze the cells and thus remove the contribution of cell turgor pressure.
In contrast to other extant techniques, by using different indenters and indentation depths, this method allows simultaneous multiscale measurements, i.e. at subcellular resolutions and across hundreds of cells comprising a tissue. This means that it is now possible&#160;to spatially-temporally characterize the changes that take place in the mechanical properties of cell walls during development, enabling these changes to be correlated with growth and differentiation. This represents a key step to understand how coordinated microscopic cellular changes bring about macroscopic morphogenetic events.
However, several limitations remain: the method can only be used on fairly small samples (around 100 &#181;m in diameter) and only on external tissues; the method is sensitive to tissue topography; it measures only certain aspects of the tissue&#8217;s complex mechanical properties. The technique is being developed rapidly and it is likely that most of these limitations will be resolved in the near future.

We describe a method to map mechanical properties of plant tissues using an atomic force microscope (AFM). We focus on how to record mechanical changes that take place in cell walls during plant development at wide-field mesoscale, enabling these changes to be correlated with growth and morphogenesis.

Cartográficas basadas en AFM de las propiedades elásticas de las paredes celulares: en tejido, celular, y las Resoluciones Subcelulares

We describe a recently developed method to measure mechanical properties of the surfaces of plant tissues using atomic force microscopy (AFM) ...

Studying DNA Looping by Single-Molecule FRET

Bending of double-stranded DNA (dsDNA) is associated with many important biological processes such as DNA-protein recognition and DNA packaging into nucleosomes. Thermodynamics of dsDNA bending has been studied by a method called cyclization which relies on DNA ligase to covalently join short sticky ends of a dsDNA. However, ligation efficiency can be affected by many factors that are not related to dsDNA looping such as the DNA structure surrounding the joined sticky ends, and ligase can also affect the apparent looping rate through mechanisms such as nonspecific binding. Here, we show how to measure dsDNA looping kinetics without ligase by detecting transient DNA loop formation by FRET (Fluorescence Resonance Energy Transfer). dsDNA molecules are constructed using a simple PCR-based protocol with a FRET pair and a biotin linker. The looping probability density known as the J factor is extracted from the looping rate and the annealing rate between two disconnected sticky ends. By testing two dsDNAs with different intrinsic curvatures, we show that the J factor is sensitive to the intrinsic shape of the dsDNA.

This study presents a detailed experimental procedure to measure looping dynamics of double-stranded DNA using single-molecule Fluorescence Resonance Energy Transfer (FRET). The protocol also describes how to extract the looping probability density called the J factor.

El estudio de ADN Looping por FRET sola molécula

Bending of double-stranded DNA (dsDNA) is associated with many important biological processes such as DNA-protein recognition and DNA packaging into ...

A Proteoliposome-Based Efflux Assay to Determine Single-molecule Properties of Cl- Channels and Transporters

The last 15 years have been characterized by an explosion in the ability to overexpress and purify membrane proteins from prokaryotic organisms as well as from eukaryotes. This increase has been largely driven by the successful push to obtain structural information on membrane proteins. However, the ability to functionally interrogate these proteins has not advanced at the same rate and is often limited to qualitative assays of limited quantitative value, thereby limiting the mechanistic insights that they can provide. An assay to quantitatively investigate the transport activity of reconstituted Cl- channels or transporters is described. The assay is based on the measure of the efflux rate of Cl- from proteoliposomes following the addition of the K+ ionophore valinomycin to shunt the membrane potential. An ion sensitive electrode is used to follow the time-course of ion efflux from proteoliposomes reconstituted with the desired protein. The method is highly suited for mechanistic studies, as it allows for the quantitative determination of key properties of the reconstituted protein, such as its unitary transport rate, the fraction of active protein and the molecular mass of the functional unit. The assay can also be utilized to determine the effect of small molecule compounds that directly inhibit/activate the reconstituted protein, as well as to test the modulatory effects of the membrane composition or lipid-modifying reagents. Where possible, direct comparison between results obtained using this method were found to be in good agreement with those obtained using electrophysiological approaches. The technique is illustrated using CLC-ec1, a CLC-type H+/Cl- exchanger, as a model system. The efflux assay can be utilized to study any Cl- conducting channel/transporter and, with minimal changes, can be adapted to study any ion-transporting protein.

A Proteoliposome-Based Efflux Assay to Determine Single-molecule Properties of Cl- Channels and Transporters

Proteoliposomes are used to study purified channels and transporters reconstituted in a well-defined biochemical environment. An experimental procedure to measure efflux mediated by these proteins is illustrated. The steps to prepare proteoliposomes, perform the recordings, and analyze data to quantitatively determine the functional properties of the reconstituted protein are described.

Un Proteoliposoma Basada Eflujo Ensayo para determinar una sola molécula Propiedades de Cl<sup&gt; -</sup&gt; Canales y Transportadores

The last 15 years have been characterized by an explosion in the ability to overexpress and purify membrane proteins from prokaryotic organisms as well as ...

Xenopus Oocytes: Optimized Methods for Microinjection, Removal of Follicular Cell Layers, and Fast Solution Changes in Electrophysiological Experiments

The Xenopus oocyte as a heterologous expression system for proteins, was first described by Gurdon et al.1 and has been widely used since its discovery (References 2 - 3, and references therein). A characteristic that makes the oocyte attractive for foreign channel expression is the poor abundance of endogenous ion channels4. This expression system has proven useful for the characterization of many proteins, among them ligand-gated ion channels.
The expression of GABAA receptors in Xenopus oocytes and their functional characterization is described here, including the isolation of oocytes, microinjections with cRNA, the removal of follicular cell layers, and fast solution changes in electrophysiological experiments. The procedures were optimized in this laboratory5,6 and deviate from the ones routinely used7-9. Traditionally, denuded oocytes are prepared with a prolonged collagenase treatment of ovary lobes at RT, and these denuded oocytes are microinjected with mRNA. Using the optimized methods, diverse membrane proteins have been expressed and studied with this system, such as recombinant GABAA receptors10-12, human recombinant chloride channels13, Trypanosome potassium channels14, and a myo-inositol transporter15, 16.
The methods detailed here may be applied to the expression of any protein of choice in Xenopus oocytes, and the rapid solution change can be used to study other ligand-gated ion channels.

Xenopus Oocytes: Optimized Methods for Microinjection, Removal of Follicular Cell Layers, and Fast Solution Changes in Electrophysiological Experiments

Optimized procedures for the isolation of single follicles, cytoplasmic RNA microinjections, the removal of surrounding cell layers, and protein expression in Xenopus oocytes are described. In addition, a simple method for fast solution changes in electrophysiological experiments with ligand-gated ion channels is presented.

Los oocitos de Xenopus: Métodos optimizados para la microinyección, la eliminación de las capas de células foliculares y Cambios solución rápida en experimentos electrofisiológicos

The Xenopus oocyte as a heterologous expression system for proteins, was first described by Gurdon et al.1 and has been widely used since its discovery ...