Name: synthesis method for cellulose nanofiber biotemplated palladium composite aerogels
Uploaded: 2019-05-09T13:00:00
Description: Watch this Scientific Journal Video about Synthesis Method for Cellulose Nanofiber Biotemplated Palladium Composite Aerogels at JoVE.com

The authors are grateful to Dr. Stephen Bartolucci and Dr. Joshua Maurer at the U.S. Army Benet Laboratories for the use of their scanning electron microscope. This work was supported by a Faculty Development Research Fund grant from the United States Military Academy, West Point.

&#8203;CAUTION: Consult all relevant safety data sheets (SDS) before use. Use appropriate safety practices when performing chemical reactions, to include the use of a fume hood and personal protective equipment (PPE). Rapid hydrogen gas evolution can cause high pressure in reaction tubes causing caps to pop and solutions to spray out. Ensure that reaction tubes remain open and pointed away from the experimenter as specified in the protocol.
1. Cellulose nanofiber hydrogel preparation
<ol>
	<...

<ol>
	<li>Kistler, S. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coherent+Expanded+Aerogels+and+Jellies.">Coherent Expanded Aerogels and Jellies.</a> Nature. 127, 741 (1931).</li><li>Du, A., Zhou, B., Zhang, Z., Shen, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Special+Material+or+a+New+State+of+Matter:+A+Review+and+Reconsideration+of+the+Aerogel.">A Special Material or a New State of Matter: A Review and Reconsideration of the Aerogel.</a> Materials. 6 (3), 941 (2013).</li><li>Tappan, B. C., Steiner, S. A., Luther, E. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoporous+Metal+Foams.">Nanoporous Metal Foams.</a> Angewandte Chemie International Edition. 49 (27), 4544-4565 (2010).</li><li>Bigall, N. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydrogels+and+Aerogels+from+Noble+Metal+Nanoparticles.">Hydrogels and Aerogels from Noble Metal Nanoparticles.</a> Angewandte Chemie International Edition. 48 (51), 9731-9734 (2009).</li><li>Ranmohotti, K. G. S., Gao, X., Arachchige, I. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Salt-Mediated+Self-Assembly+of+Metal+Nanoshells+into+Monolithic+Aerogel+Frameworks.">Salt-Mediated Self-Assembly of Metal Nanoshells into Monolithic Aerogel Frameworks.</a> Chemistry of Materials. 25 (17), 3528-3534 (2013).</li><li>Gao, X., Esteves, R. J., Luong, T. T. H., Jaini, R., Arachchige, I. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oxidation-Induced+Self-Assembly+of+Ag+Nanoshells+into+Transparent+and+Opaque+Ag+Hydrogels+and+Aerogels.">Oxidation-Induced Self-Assembly of Ag Nanoshells into Transparent and Opaque Ag Hydrogels and Aerogels.</a> Journal of the American Chemical Society. 136 (22), 7993-8002 (2014).</li><li>Herrmann, A. -. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multimetallic+Aerogels+by+Template-Free+Self-Assembly+of+Au,+Ag,+Pt,+and+Pd+Nanoparticles.">Multimetallic Aerogels by Template-Free Self-Assembly of Au, Ag, Pt, and Pd Nanoparticles.</a> Chemistry of Materials. 26 (2), 1074-1083 (2014).</li><li>Ding, Y., Chen, M., Erlebacher, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metallic+Mesoporous+Nanocomposites+for+Electrocatalysis.">Metallic Mesoporous Nanocomposites for Electrocatalysis.</a> Journal of the American Chemical Society. 126 (22), 6876-6877 (2004).</li><li>Liu, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-Performance+Electrocatalysis+on+Palladium+Aerogels.">High-Performance Electrocatalysis on Palladium Aerogels.</a> Angewandte Chemie International Edition. 51 (23), 5743-5747 (2012).</li><li>Shafaei Douk, A., Saravani, H., Noroozifar, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+assembly+of+building+blocks+for+the+fabrication+of+Pd+aerogel+as+a+high+performance+electrocatalyst+toward+ethanol+oxidation.">Three-dimensional assembly of building blocks for the fabrication of Pd aerogel as a high performance electrocatalyst toward ethanol oxidation.</a> Electrochimica Acta. 275, 182-191 (2018).</li><li>Burpo, F. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+solution-based+reduction+synthesis+of+Au,+Pd,+and+Pt+aerogels.">Direct solution-based reduction synthesis of Au, Pd, and Pt aerogels.</a> Journal of Materials Research. 32 (22), 4153-4165 (2017).</li><li>Burpo, F. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Rapid+Synthesis+Method+for+Au,+Pd,+and+Pt+Aerogels+Via+Direct+Solution-Based+Reduction.">A Rapid Synthesis Method for Au, Pd, and Pt Aerogels Via Direct Solution-Based Reduction.</a> JoVE. (136), e57875 (2018).</li><li>Qin, G. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Facile+and+Template-Free+Method+to+Prepare+Mesoporous+Gold+Sponge+and+Its+Pore+Size+Control.">A Facile and Template-Free Method to Prepare Mesoporous Gold Sponge and Its Pore Size Control.</a> The Journal of Physical Chemistry C. 112 (28), 10352-10358 (2008).</li><li>Hench, L. L., West, J. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Sol-Gel+Process.">The Sol-Gel Process.</a> Chemical Reviews. 90 (1), 33-72 (1990).</li><li>Sotiropoulou, S., Sierra-Sastre, Y., Mark, S. S., Batt, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biotemplated+Nanostructured+Materials.">Biotemplated Nanostructured Materials.</a> Chemistry of Materials. 20 (3), 821-834 (2008).</li><li>Huang, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bio-inspired+synthesis+of+metal+nanomaterials+and+applications.">Bio-inspired synthesis of metal nanomaterials and applications.</a> Chemical Society Reviews. 44 (17), 6330-6374 (2015).</li><li>Burpo, F. J., Mitropoulos, A. N., Nagelli, E. A., Ryu, M. Y., Palmer, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gelatin+biotemplated+platinum+aerogels.">Gelatin biotemplated platinum aerogels.</a> MRS Advances. 10, 1-6 (2018).</li><li>Jarvis, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellulose+stacks+up.">Cellulose stacks up.</a> Nature. 426, 611 (2003).</li><li>Sir&#243;, I., Plackett, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfibrillated+cellulose+and+new+nanocomposite+materials:+a+review.">Microfibrillated cellulose and new nanocomposite materials: a review.</a> Cellulose. 17 (3), 459-494 (2010).</li><li>Dufresne, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanocellulose:+a+new+ageless+bionanomaterial.">Nanocellulose: a new ageless bionanomaterial.</a> Materials Today. 16 (6), 220-227 (2013).</li><li>Grishkewich, N., Mohammed, N., Tang, J., Tam, K. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+the+application+of+cellulose+nanocrystals.">Recent advances in the application of cellulose nanocrystals.</a> Current Opinion in Colloid &amp; Interface Science. 29, 32-45 (2017).</li><li>Eyley, S., Thielemans, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surface+modification+of+cellulose+nanocrystals.">Surface modification of cellulose nanocrystals.</a> Nanoscale. 6 (14), 7764-7779 (2014).</li><li>Missoum, K., Belgacem, M., Bras, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanofibrillated+Cellulose+Surface+Modification.">Nanofibrillated Cellulose Surface Modification.</a> A Review. Materials. 6 (5), 1745 (2013).</li><li>Li, Z., Yao, C., Wang, F., Cai, Z., Wang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellulose+nanofiber-templated+three-dimension+TiO2+hierarchical+nanowire+network+for+photoelectrochemical+photoanode.">Cellulose nanofiber-templated three-dimension TiO2 hierarchical nanowire network for photoelectrochemical photoanode.</a> Nanotechnology. 25 (50), 504005 (2014).</li><li>Hal Koga, ., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Uniformly+connected+conductive+networks+on+cellulose+nanofiber+paper+for+transparent+paper+electronics.">Uniformly connected conductive networks on cellulose nanofiber paper for transparent paper electronics.</a> Npg Asia Materials. 6, 93 (2014).</li><li>Fal Burpo, ., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellulose+Nanofiber+Biotemplated+Palladium+Composite+Aerogels.">Cellulose Nanofiber Biotemplated Palladium Composite Aerogels.</a> Molecules. 23 (6), 1405 (2018).</li><li>Gu, J., Hu, C., Zhang, W., Dichiara, A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reagentless+preparation+of+shape+memory+cellulose+nanofibril+aerogels+decorated+with+Pd+nanoparticles+and+their+application+in+dye+discoloration.">Reagentless preparation of shape memory cellulose nanofibril aerogels decorated with Pd nanoparticles and their application in dye discoloration.</a> Applied Catalysis B: Environmental. 237, 482-490 (2018).</li><li>Coates, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=in+A+Practical+Approach.">in A Practical Approach.</a> In Encyclopedia of Analytical Chemistry .doi:10.1002/9780470027318.a5606 (ed. , (2006).</li><li>Sal Wang, ., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellulose+nanofiber-assisted+dispersion+of+cellulose+nanocrystals@polyaniline+in+water+and+its+conductive+films).">Cellulose nanofiber-assisted dispersion of cellulose nanocrystals@polyaniline in water and its conductive films).</a> RSC Advances. 6 (12), 10168-10174 (2016).</li><li>Grabarek, Z., Gergely, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Zero-length+crosslinking+procedure+with+the+use+of+active+esters.">Zero-length crosslinking procedure with the use of active esters.</a> Analytical Biochemistry. 185 (1), 131-135 (1990).</li><li>Shabanpour, B., Kazemi, M., Ojagh, S. M., Pourashouri, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bacterial+cellulose+nanofibers+as+reinforce+in+edible+fish+myofibrillar+protein+nanocomposite+films.">Bacterial cellulose nanofibers as reinforce in edible fish myofibrillar protein nanocomposite films.</a> International Journal of Biological Macromolecules. 117, 742-751 (2018).</li><li>Brunauer, B., Emmett, P., Teller, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adsorption+of+gases+in+multimolecular+layers.">Adsorption of gases in multimolecular layers.</a> Journal of the American Chemical Society. 60, (1938).</li><li>Barrett, E., Joyner, L., Halenda, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+determination+of+pore+volume+and+area+distributions+in+porous+substances.">The determination of pore volume and area distributions in porous substances.</a> I. Computations. 73, (1951).</li></ol>

The noble metal cellulose nanofiber biotemplated aerogel synthesis method presented here results in stable aerogel composites with tunable metal composition. The covalent crosslinking of the compacted cellulose nanofibers after centrifugation results in hydrogels that are mechanically durable during the subsequent synthesis steps of palladium ion equilibration, electrochemical reduction, rinsing, solvent exchange, and supercritical drying. The hydrogel stability is vital during the electrochemical reduction step given th...

Aerogels, first reported by Kistler, offer porous structures orders of magnitude less dense than their bulk material counterparts1,2,3. Noble metal aerogels have attracted scientific interest for their potential in power and energy, catalytic, and sensor applications. Noble metal aerogels have recently been synthesized via two basic strategies. One strategy is to induce the coalescence of pre-formed nanoparticles4,5,6,7. Sol-gel coalescence of nanoparticles can be driven by linker molecules, changes in solution ionic strength, or simple nanoparticle surface free energy minimization7,8,9. The other strategy is to form aerogels in a single reduction step from metal precursor solutions9,10,11,12,13. This approach has also been used to form bimetallic and alloy noble metal aerogels. The first strategy is generally slow and may require up to many weeks for nanoparticle coalescence14. The direct reduction approach, while generally more rapid, suffers from poor shape control over the macroscopic aerogel monolith.
One possible synthesis approach to address challenges with control of noble metal aerogel macroscopic shape and nanostructure is to employ biotemplating15. Biotemplating uses biological molecules ranging from collagen, gelatin, DNA, viruses, to cellulose to provide a shape-directing template for the synthesis of nanostructures, where the resulting metal-based nanostructures assume the geometry of the biological template molecule16,17. Cellulose nanofibers are appealing as a biotemplate given the high natural abundance of cellulosic materials, their high aspect ratio linear geometry, and ability to chemically functionalize their glucose monomers18,19,20,21,22,23. Cellulose nanofibers (CNF) have been used to synthesize three dimensional TiO2 nanowires for photoanodes24, silver nanowires for transparent paper electronics25, and palladium aerogel composites for catalysis26. Further, TEMPO-oxidized cellulose nanofibers have been used both as a biotemplate and reducing agent in the preparation of palladium decorated CNF aerogels27.
Here, a method to synthesize cellulose nanofiber biotemplated palladium composite aerogels is presented26. Fragile aerogels with poor shape control occurs for a range noble metal aerogel synthesis methods. Carboxymethylated cellulose nanofibers (CNFs) used to form a covalent hydrogel allow for the reduction of metal ions such as palladium on the CNFs providing control over both nanostructure and macroscopic aerogel monolith shape after supercritical drying. Carboxymethylated cellulose nanofiber crosslinking is achieved using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) in the presence of ethylenediamine as a linker molecule between CNFs. The CNF hydrogels maintain their shape throughout the synthesis steps including covalent crosslinking, equilibration with precursor ions, metal reduction with high concentration reducing agent, rinsing in water, ethanol solvent exchange, and CO2 supercritical drying. Precursor ion concentration variation allows for control over the final aerogel metal content through a direct ion reduction rather than relying on the relatively slow coalescence of pre-formed nanoparticles used in sol-gel methods. With diffusion as the basis to introduce and remove chemical species into and out of the hydrogel, this method is suitable for smaller bulk geometries and thin films. Characterization of the cellulose nanofiber-palladium composite aerogels with scanning electron microscopy, X-ray diffractometry, thermal gravimetric analysis, nitrogen gas adsorption, electrochemical impedance spectroscopy, and cyclic voltammetry indicates a high surface area, metalized palladium porous structure.

<table border="0" cellpadding="0" cellspacing="0" style="width:826px;" width="825">
	<tbody>
		<tr height="62">
			<td height="62" style="height:63px;width:295px;">0.5 mm platinum wire electrode</td>
			<td style="width:132px;">BASi</td>
			<td style="width:123px;">MW-4130</td>
			<td style="width:277px;">Used for auxillery electrode and separately for lacquer coating and use as a working electrode</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:295px;">1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC)</td>
			<td style="width:132px;">Sigma-Aldrich</td>
			<td style="width:123px;">&#160;1892-57-5</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:295px;">2-(N-morpholino)ethanesulfonic acid (MES)</td>
			<td style="width:132px;">Sigma-Aldrich</td>
			<td>117961-21-4&#160;</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Ag/AgCl (3M NaCl) Reference Electrode</td>
			<td style="width:132px;">BASi</td>
			<td style="width:123px;">MF-2052</td>
			<td></td>
		</tr>
		<tr height="83">
			<td height="83" style="height:84px;width:295px;">Carboxymethyl cellulose, TEMPO Cellulose Nanofibrils, Dry Powder</td>
			<td style="width:132px;">University of Maine Process Development Center</td>
			<td style="width:123px;">No 8</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Ethanol, 200 proof</td>
			<td style="width:132px;">PHARMCO-AAPER</td>
			<td style="width:123px;">241000200</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Ethylenediamine</td>
			<td style="width:132px;">Sigma-Aldrich</td>
			<td style="width:123px;">&#160;107-15-3</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:295px;">Fourier-Transform Infrared (FTIR) Spectrometer, Frontier</td>
			<td style="width:132px;">Perkin Elmer</td>
			<td style="width:123px;">L1280044</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Hydrochloric Acid</td>
			<td style="width:132px;">CORCO</td>
			<td style="width:123px;">7647-01-0</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:25px;width:295px;">Na2PdCl4</td>
			<td style="width:132px;">Sigma-Aldrich</td>
			<td style="width:123px;">13820-40-1</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:25px;width:295px;">NaBH4</td>
			<td style="width:132px;">Sigma-Aldrich</td>
			<td style="width:123px;">16940-66-2</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:25px;width:295px;">Pd(NH3)4Cl2</td>
			<td style="width:132px;">Sigma-Aldrich</td>
			<td style="width:123px;">13933-31-8</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Potentiostat</td>
			<td style="width:132px;">Biologic-USA</td>
			<td style="width:123px;">VMP-3</td>
			<td>Electrochemical analysis-EIS, CV</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:295px;">Scanning Electron Mciroscope (SEM) Helios 600 Nanolab</td>
			<td style="width:132px;">ThermoFisher Scientific</td>
			<td style="width:123px;"></td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:25px;width:295px;">Supercritical Dryer</td>
			<td style="width:132px;">Leica</td>
			<td style="width:123px;">EM CPD300</td>
			<td>Aerogel supercritical drying with CO2</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Surface and Pore Analyzer</td>
			<td style="width:132px;">Quantachrome</td>
			<td style="width:123px;">NOVA 4000e</td>
			<td>Nitrogen gas adsorption</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">Thermal Gravimetric Analysis</td>
			<td style="width:132px;">TA instruments</td>
			<td style="width:123px;">TGA Q500</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:295px;">Ultrasonic Cleaner</td>
			<td style="width:132px;">MTI</td>
			<td style="width:123px;">EQ-VGT-1860QTD</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:295px;">XRD</td>
			<td style="width:132px;">PanAlytical</td>
			<td style="width:123px;">Empyrean</td>
			<td>X-ray diffractometry</td>
		</tr>
	</tbody>
</table>

synthesis method for cellulose nanofiber biotemplated palladium composite aerogels

Here, a method to synthesize cellulose nanofiber biotemplated palladium composite aerogels is presented. Noble metal aerogel synthesis methods often result in fragile aerogels with poor shape control. The use of carboxymethylated cellulose nanofibers (CNFs) to form a covalently bonded hydrogel allows for the reduction of metal ions such as palladium on the CNFs with control over both nanostructure and macroscopic aerogel monolith shape after supercritical drying. Crosslinking the carboxymethylated cellulose nanofibers is achieved using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) in the presence of ethylenediamine. The CNF hydrogels maintain their shape throughout synthesis steps including covalent crosslinking, equilibration with precursor ions, metal reduction with high concentration reducing agent, rinsing in water, ethanol solvent exchange, and CO2 supercritical drying. Varying the precursor palladium ion concentration allows for control over the metal content in the final aerogel composite through a direct ion chemical reduction rather than relying on the relatively slow coalescence of pre-formed nanoparticles used in other sol-gel techniques. With diffusion as the basis to introduce and remove chemical species into and out of the hydrogel, this method is suitable for smaller bulk geometries and thin films. Characterization of the cellulose nanofiber-palladium composite aerogels with scanning electron microscopy, X-ray diffractometry, thermal gravimetric analysis, nitrogen gas adsorption, electrochemical impedance spectroscopy, and cyclic voltammetry indicates a high surface area, metallized palladium porous structure.

The scheme to covalently crosslink cellulose nanofibers with EDC in the presence of ethylenediamine is depicted in Figure 1. EDC crosslinking results in an amide bond between a carboxyl and primary amine functional group. Given that the carboxymethyl cellulose nanofibers possess only carboxyl groups for crosslinking, the presence of a diamine linker molecule such as ethylenediamine is essential to covalently link two adjacent CNFs via two amide bonds. To conf...

Watch this Scientific Journal Video about Synthesis Method for Cellulose Nanofiber Biotemplated Palladium Composite Aerogels at JoVE.com

Synthesis Method for Cellulose Nanofiber Biotemplated Palladium Composite Aerogels

A synthesis method for cellulose nanofiber biotemplated palladium composite aerogels is presented.The resulting composite aerogel materials offer potential for catalysis, sensing, and hydrogen gas storage applications.

Here, a method to synthesize cellulose nanofiber biotemplated palladium composite aerogels is presented. Noble metal aerogel synthesis methods often ...

This method using cellulose nanofiber biopolymer covalent hydrogels to achieve a palladium metal aerogel composite may be generalizable to a wide range of biopolymer templates and metals. This composite aerogel synthesis method uses cellulose nanofibers as a biotemplate to achieve control over both pallium metal nanostructure and macroscopic aerogel monolith shape. The shape control and mechanical integrity of biotemplated metal aerogels should facilitate applications for catalysis, energy storage, and sensing.This method can be applied to further develop biopolymer carbon metal templates and to achieve better control of three-dimensional nanostructures in composite aerogel materials. To prepare a cellulose nanofiber solution, first mix 1.5 grams of carboxymethyl cellulose nanofibers with 50 milliliters of deionized water. After shaking, vortex the solution for one minute, followed by a 24-hour incubation in a bath sonicator at ambient temperature to ensure complete mixing.The next morning, add 0.959 grams of EDC and 0.195 grams of MES buffer to 2.833 milliliters of deionized water. Then, adjust the final volume to 10 milliliters and a pH of 4.5 with one-molar hydrochloric acid and deionized water. Next, transfer 0.25 milliliters of the 3%cellulose nanofiber solution into each of six microfuge tubes, and sediment the nanofibers by centrifugation.Use a pipette to aspirate the excess water above the compacted nanofibers while avoiding contact with the top surface. Add one milliliter of the EDC and diamine crosslinking solution above the compacted cellulose nanofibers in each microfuge tube. Wait at least 24 hours for the crosslinking solution to diffuse through the gels to crosslink the cellulose nanofibers.Then, aspirate the crosslinking solution supernatant from the microfuge tubes, and immerse the microfuge tubes in one liter of deionized water for at least 24 hours with the caps open to remove any excess crosslinking solution from within the nanofiber hydrogels. The next day, add approximately 0.5 milliliters of one 3%cellulose nanofiber solution in deionized water to the sample stage of a Fourier-transform infrared spectrometer, and scan the percent transmittance for 650 to 4, 000 reciprocal centimeters. To prepare the palladium solution, vortex 10 milliliters of one-molar palladium ammonium chloride for 15 seconds before diluting the solution to one-milliliter volumes at one, 10, 50, 100, 500, and 1, 000-millimolar concentrations in deionized water.Next, add one milliliter of each dilution to the top of individual cellulose nanofiber hydrogel samples, and allow the palladium solutions to equilibrate within the hydrogels for 24 hours. The next day, prepare 60 milliliters of two-molar sodium borohydride and pipette 10 milliliters into each of six 15-milliliter conical tubes in a fume hood, and transfer the tubes of palladium equilibrated cellulose nanofiber hydrogels to the fume hood. Wearing the appropriate personal protection equipment, invert one microcentrifuge tube and gently tap the tube to remove the hydrogel, using flat tweezers to transfer the hydrogel into one of the tubes of sodium borohydride.After 24 hours, transfer each reduced hydrogel into a second 24-hour, 0.5-molar sodium borohydride reduction solution before rinsing the cellulose nanofiber-palladium composite gels in 50 milliliters of deionized water in new conical tubes. Exchange the deionized water after 12 hours, and allow the gels to rinse for at least an additional 12 hours. Then, use flat tweezers to transfer the rinsed cellulose nanofiber-palladium gels to successive 50-milliliter volumes of 25%50%75%and 100%ethanol solutions for at least six hours per solution.After the last solvent exchange, dry the hydrogels in a supercritical dryer with carbon dioxide, with a set point of 35 degrees Celsius and 1200 pounds per square inch. When the drying is complete, allow the chamber to equilibrate for at least 12 hours before opening the dryer for removal of the aerogels. To characterize the composite aerogels by scanning electron microscopy, use a razor blade to cut each gel into one-to two-millimeter-thick sections, and use carbon tape to fix the thin film sample onto a scanning electron microscope sample stub.Load the stub onto the microscope, and use an initial accelerating voltage of 15 kilovolts and a beam current of 2.7 to 5.4 picoamps to image the sample. To analyze the aerogels by x-ray diffractometry, place the cellulose nanofiber-palladium aerogel in a sample holder, and align the top of the aerogel with the top of the holder. Then, perform x-ray diffraction scans for diffraction angles two theta from five to 90 degrees at 45 kilovolts and 40 milliamps with copper K-alpha radiation, a two theta step size of 0130 degrees, and 20 seconds per step.For thermal gravimetric analysis, place an aerogel sample in the instrument crucible, and perform the analysis by flowing nitrogen gas at 60 milliliters per minute with heating at 10 degrees per minute from ambient temperature to 700 degrees Celsius. For nitrogen gas adsorption-desorption, degas the samples for 24 hours at room temperature before using nitrogen at minus 196 degrees Celsius as the test gas with equilibration times for adsorption and desorption of 60 and 120 seconds, respectively. For electrochemical characterization, immerse the aerogel samples in 0.5-molar sulfuric acid electrolyte for 24 hours before placing a lacquer-coated wire with a one-millimeter exposed tip in contact with the top surface of the aerogel at the bottom of the electrochemical vial.Then, use a three-electrode cell with a silver/silver chloride 0.5-millimeter-diameter platinum wire auxiliary counter electrode and a lacquer-coated 0.5-millimeter-diameter platinum working electrode to perform electrochemical impedance spectroscopy from one megahertz to one millihertz with a 10-millivolt sine wave and cyclic voltammetry using a voltage range of minus 0.2 to 1.2 volts with scan rates of 10, 25, 50, and 75 millivolts per second. Fourier-transform infrared spectroscopy can be performed as demonstrated to confirm cellulose nanofiber hydrogel crosslinking. Here, covalently crosslinked cellulose nanofiber hydrogels before and after equilibration across a range of palladium ammonium chloride or sodium palladium chloride concentrations are shown.Here, reduced cellulose nanofiber-palladium gels are shown before and after supercritical aerogel composite drying. In general, the aerogels present interconnected fibrillary ligaments with an increasing nanoparticle size, correlating with an increase in palladium solution concentration by scanning electron microscopy. X-ray diffractometry spectra for palladium and palladium hydride become more convoluted with increasing palladium synthesis concentration until the spectra are no longer distinguishable at 1, 000 millimolar, correlating with the increase in nanoparticle diameters observed by scanning electron microscopy.Thermogravimetric spectra analysis reveals an increasing metal content in the cellulose nanofiber-palladium composite aerogels as the synthesis palladium solution concentration increases. The physisorption data demonstrates a Type IV adsorption-desorption isotherm, indicating a mesoporous and macroporous structure, and Barrett-Joyner-Halenda pore size analysis indicates a decreasing frequency of mesopores as the aerogel palladium content increases. Electrochemical impedance spectroscopy spectra illustrate the low charge transfer resistance and double layer capacitance for the cellulose nanofiber-palladium composite aerogel.Further, cyclic voltammetry scans indicate hydrogen adsorption and desorption at potentials less than zero volts, as well as characteristic oxidation and reduction peaks for palladium greater than 0.5 volts. Remember to rinse the gels with incremental concentrations of water and ethanol as the osmotic swelling from large concentration differences may rupture the hydrogel. Incorporating other materials such as graphene and carbon nanotubes for composite biotemplates may be possible to achieve greater mechanical durability and conductivity of the aerogels.The use of cellulose nanofiber covalent hydrogels to achieve porous metal composite aerogels offers a synthesis route for other noble and transition metal materials in a variety of form factors. High concentrations of aqueous sodium borohydride results in the production of flammable hydrogen gas. It is important to electrochemically reduce the samples in a well-ventilated area, away from open flames.

Research

JoVE Journal

Chemistry

Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation

Woody materials are comprised of plant cell walls that contain a layered secondary cell wall composed of structural polymers of polysaccharides and ...

Preparation of Biopolymer Aerogels Using Green Solvents

Although the first reports on aerogels made by Kistler1 in the 1930s dealt with aerogels from both inorganic oxides (silica and others) and biopolymers ...

Palladium N-Heterocyclic Carbene Complexes: Synthesis from Benzimidazolium Salts and Catalytic Activity in Carbon-carbon Bond-forming Reactions

Palladium N-Heterocyclic Carbene Complexes: Synthesis from Benzimidazolium Salts and Catalytic Activity in Carbon-carbon Bond-forming Reactions

Detailed and generalized protocols are presented for the synthesis and subsequent purification of four palladium N-heterocyclic carbene complexes from ...

Chemical Precipitation Method for the Synthesis of Nb2O5 Modified Bulk Nickel Catalysts with High Specific Surface Area

Chemical Precipitation Method for the Synthesis of Nb2O5 Modified Bulk Nickel Catalysts with High Specific Surface Area

We demonstrate a method for the synthesis of NixNb1-xO catalysts with sponge-like and fold-like nanostructures. By varying the Nb:Ni ratio, a series of ...

Fabrication and Testing of Catalytic Aerogels Prepared Via Rapid Supercritical Extraction

Protocols for preparing and testing catalytic aerogels by incorporating metal species into silica and alumina aerogel platforms are presented. Three ...

Ligand-Mediated Nucleation and Growth of Palladium Metal Nanoparticles

The size, size distribution and stability of colloidal nanoparticles are greatly affected by the presence of capping ligands. Despite the key contribution ...

Synthesis of Substrate-Bound Au Nanowires Via an Active Surface Growth Mechanism

Advancing synthetic capabilities is important for the development of nanoscience and nanotechnology. The synthesis of nanowires has always been a ...

A Rapid Synthesis Method for Au, Pd, and Pt Aerogels Via Direct Solution-Based Reduction

Here, a method to synthesize gold, palladium, and platinum aerogels via a rapid, direct solution-based reduction is presented. The combination of various ...

A Salt-Templated Synthesis Method for Porous Platinum-based Macrobeams and Macrotubes

The synthesis of high surface area porous noble metal nanomaterials generally relies on time consuming coalescence of pre-formed nanoparticles, followed ...

Localized Bathless Metal-Composite Plating via Electrostamping

Composite plating with particles embedded into the metal matrix can enhance the properties of the metal coating to make it more or less conductive, hard, ...