Name: fabrication of micro-tissues using modules of collagen gel containing cells
Uploaded: 2010-12-13T17:00:00
Description: Watch this Scientific Journal Video about Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells at JoVE.com

Funding was provided by the National Institutes of Health (EB 001013), Natural Sciences and Engineering Research Council of Canada and Canadian Institutes of Health Research.  We thank Dr. A. P. McGuigan for her expertise and help in development of modules.

1) Preparation of Tubing
<ol>
<li>	Cut 2 to 3 m lengths of polyethylene tubing (0.76 mm I.D. x 1.22 mm O.D.).</li>
<li>	Thread a 20 G1 needle into one end of the tubing.</li>
<li>	Coil the tubing and place in a convertors self-seal pouch (7 1/2" x 13"). The two ends of the tubing should be placed at the unsealed end of the bag and taped in place with gas sterilization tape.</li>
<li>	Seal bag and gas sterilize.</li>
</ol>
2) Neutralization of Collagen
Note: 1 m...

<ol>
	<li>Chamberlain, M. D., Gupta, R., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chimeric+vessel+tissue+engineering+driven+by+endothelialized+modules.">Chimeric vessel tissue engineering driven by endothelialized modules.</a> , (2010).</li><li>Corstorphine, L. E., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effectiveness+factor+and+diffusion+limitations+in+collagen+gel+modules+containing+HepG2+cells.">Effectiveness factor and diffusion limitations in collagen gel modules containing HepG2 cells.</a> J Tissue Eng Regen Med. , (2010).</li><li>Gupta, R., Van Rooijen, N., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fate+of+endothelialized+modular+constructs+implanted+in+an+omental+pouch+in+nude+rats.">Fate of endothelialized modular constructs implanted in an omental pouch in nude rats.</a> Tissue Eng. Part A 15, 2875-2887 (2009).</li><li>Leung, B. M., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+modular+tissue+engineering+construct+containing+smooth+muscle+cells+and+endothelial+cells.">A modular tissue engineering construct containing smooth muscle cells and endothelial cells.</a> Ann Biomed Eng. 35, 2039-2049 (2007).</li><li>McGuigan, A. P., Leung, B., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+of+cell-containing+gel+modules+to+assemble+modular+tissue-engineered+constructs+[corrected].">Fabrication of cell-containing gel modules to assemble modular tissue-engineered constructs [corrected].</a> Nat Protoc. 1, 2963-2969 (2006).</li><li>McGuigan, A. P., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vascularized+organoid+engineered+by+modular+assembly+enables+blood+perfusion.">Vascularized organoid engineered by modular assembly enables blood perfusion.</a> Proc Natl Acad Sci U S A. 103, 11461-11466 (2006).</li><li>McGuigan, A. P., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modular+tissue+engineering:+fabrication+of+a+gelatin-based+construct.">Modular tissue engineering: fabrication of a gelatin-based construct.</a> J Tissue Eng Regen Med. 1, 136-145 (2007).</li><li>McGuigan, A. P., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+fabrication+of+sub-mm-sized+modules+containing+encapsulated+cells+for+modular+tissue+engineering.">Design and fabrication of sub-mm-sized modules containing encapsulated cells for modular tissue engineering.</a> Tissue Eng. 13, 1069-1078 (2007).</li><li>McGuigan, A. P., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+criteria+for+a+modular+tissue-engineered+construct.">Design criteria for a modular tissue-engineered construct.</a> Tissue Eng. 13, 1079-1089 (2007).</li><li>McGuigan, A. P., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+thrombogenicity+of+human+umbilical+vein+endothelial+cell+seeded+collagen+modules.">The thrombogenicity of human umbilical vein endothelial cell seeded collagen modules.</a> Biomaterials. 29, 2453-2463 (2008).</li><li>Sosnik, A., Leung, B., McGuigan, A. P., Sefton, M. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Collagen/poloxamine+hydrogels:+cytocompatibility+of+embedded+HepG2+cells+and+surface-attached+endothelial+cells.">Collagen/poloxamine hydrogels: cytocompatibility of embedded HepG2 cells and surface-attached endothelial cells.</a> Tissue Eng. 11, 1807-1816 (2005).</li></ol>

We have fabricated several different micro-tissues using modules embedded with different cell types1-11. We have successfully embedded primary cardiomyocytes, islets, adipose stem cells and mesenchymal stromal cells as well as several cell lines including HepG2, NIH 3T3 and clone 9 liver cells. We have coated the modules with several types of endothelial cells including rat aortic endothelial cells, human umbilical vein endothelial cells and human microvascular endothelial cells. Modules have also been prod...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Intramedic tubing PE60</td>
<td>&nbsp;</td>
<td>Becton Dickson</td>
<td>427416</td>
<td>Different diameter of tubing can be used to change the diameter of the modules</td>
</tr>
<tr>
<td>Phosphate-buffered saline (PBS)</td>
<td>&nbsp;</td>
<td>Gibco</td>
<td>20012-027</td>
<td>&nbsp;</td>
<tr>
<td>Trypsin-EDTA</td>
<td>&nbsp;</td>
<td>Gibco</td>
<td>25200-072</td>
<td>&nbsp;</td>
<tr>
<td>Purcol acidificed collagen, 3 mg/mL</td>
<td>&nbsp;</td>
<td>Cedarlane</td>
<td>5005-B</td>
<td>&nbsp;</td>
<tr>
<td>Sodium bicarbonate</td>
<td>&nbsp;</td>
<td>Sigma-Aldrich</td>
<td>S5761</td>
<td>&nbsp;</td>
<tr>
<td>20G needle</td>
<td>&nbsp;</td>
<td>Becton Dickson</td>
<td>305175</td>
<td>Diameter of the needle needs to be similar to the diameter of the tubing</td>
</tr>
<tr>
<td>3 mL syringe</td>
<td>&nbsp;</td>
<td>BD Biosciences</td>
<td>309585</td>
<td>&nbsp;</td>
<tr>
<td>15 mL tube</td>
<td>&nbsp;</td>
<td>BD Biosciences</td>
<td>352096</td>
<td>&nbsp;</td>
<tr>
<td>50 mL tube</td>
<td>&nbsp;</td>
<td>BD Biosciences</td>
<td>352070</td>
<td>&nbsp;</td>
<tr>
<td>Convertors Self-Seal Pouch 7 1/2&#x201D; x 13&#x201D;</td>
<td>&nbsp;</td>
<td>Cardinal Health</td>
<td>92713</td>
<td>&nbsp;</td>
<tr>
<td>10 ml Wide Tip serological pipet</td>
<td>&nbsp;</td>
<td>BD Falcon</td>
<td>357504</td>
<td>&nbsp;</td>
<tr>
<td>10 ml serological pipet</td>
<td>&nbsp;</td>
<td>BD Falcon</td>
<td>357551</td>
<td>&nbsp;</td>
<tr>
<td>5 ml serological pipet</td>
<td>&nbsp;</td>
<td>BD Falcon</td>
<td>357543</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

fabrication of micro-tissues using modules of collagen gel containing cells

This protocol describes the fabrication of a type of micro-tissues called modules.  The module approach generates uniform, scalable and vascularized tissues.  The modules can be made of collagen as well as other gelable or crosslinkable materials.  They are approximately 2 mm in length and 0.7 mm in diameter upon fabrication but shrink in size with embedded cells or when the modules are coated with endothelial cells.  The modules individually are small enough that the embedded cells are within the diffusion limit of oxygen and other nutrients but modules can be packed together to form larger tissues that are perfusable.  These tissues are modular in construction because different cell types can be embedded in or coated on the modules before they are packed together to form complex tissues.  There are three main steps to making the modules: (1) neutralizing the collagen and embedding cells in it, (2) gelling the collagen in the tube and cutting the modules and (3) coating the modules with endothelial cells.

Watch this Scientific Journal Video about Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells at JoVE.com

Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells

Creation of micro-tissues using cylindrical collagen gels, called modules, that contain embedded cells and which surface is coated with endothelial cells.

This protocol describes the fabrication of a type of micro-tissues called modules.  The module approach generates uniform, scalable and vascularized ...

Research

JoVE Journal

Bioengineering

Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography

Increasingly, patterned cell culture environments are becoming a relevant technique to study cellular characteristics, and many researchers believe in the ...

Imaging Denatured Collagen Strands In vivo and Ex vivo via Photo-triggered Hybridization of Caged Collagen Mimetic Peptides

Imaging Denatured Collagen Strands In vivo and Ex vivo via Photo-triggered Hybridization of Caged Collagen Mimetic Peptides

Collagen is a major structural component of the extracellular matrix that supports tissue formation and maintenance. Although collagen remodeling is an ...

Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and ...

Analysis of Cell Migration within a Three-dimensional Collagen Matrix

The ability to migrate is a hallmark of various cell types and plays a crucial role in several physiological processes, including&#160;embryonic ...

Minced Tissue in Compressed Collagen: A Cell-containing Biotransplant for Single-staged Reconstructive Repair

Conventional techniques for cell expansion and transplantation of autologous cells for tissue engineering purposes can take place in specially equipped ...

Preparation and Photoacoustic Analysis of Cellular Vehicles Containing Gold Nanorods

Gold nanorods are attractive for a range of biomedical applications, such as the photothermal ablation and the photoacoustic imaging of cancer, thanks to ...

Forming Giant-sized Polymersomes Using Gel-assisted Rehydration

Polymer vesicles, or polymersomes, are being widely explored as synthetic analogs of lipid vesicles based on their stability, robustness, barrier ...

Fabrication and Characterization of Optical Tissue Phantoms Containing Macrostructure

The rapid development of new optical imaging techniques is dependent on the availability of low-cost, customizable, and easily reproducible standards. By ...

Preparation, Purification, and Use of Fatty Acid-containing Liposomes

Liposomes containing single-chain amphiphiles, particularly fatty acids, exhibit distinct properties compared to those containing diacylphospholipids due ...

Uptake of New Lipid-coated Nanoparticles Containing Falcarindiol by Human Mesenchymal Stem Cells

Nanoparticles are the focus of an increased interest in drug delivery systems for cancer therapy. Lipid-coated nanoparticles are inspired in structure and ...