Name: a simple and scalable fabrication method for organic electronic devices on textiles
Uploaded: 2017-03-13T15:00:00.000+00:00
Duration: 6 min 21 s
Description: Watch this Scientific Journal Video about A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles at JoVE.com

The authors would like to acknowledge the BPI PIAVE AUTONOTEX grant for the financial support.

1. patterning polimeri conduttori sul tessile <ol><li> Fix a 10 cm x 10 cm strato tessile su una superficie piana per una facile movimentazione durante il processo. Per tessile, utilizzare un interblocco tessuto lavorato a maglia 100% poliestere con spessore di 300 um e una capacità maglia direzione di stiro fino al 50%. </li><li> Per fare una maschera con il motivo patterning, utilizzare un poliimmide film 125 micron di spessore; un esempio del modello è illustrato in Figura 1. <ol><li> Utilizzare una taglierina laser (ad esempio, Protolaser S, LPKF) al modello della maschera poliimmide 10; il disegno del modello di un elettrodo è illustrato in Figura 1. </li><li> Coat formulazione PDMS (10: 1 base per curare rapporto agent) sulla parte superiore della maschera (film poliimmide) utilizzando uno strumento automatico del nastro di colata (K controllo di stampa-coater, racla) con uno spessore di film umido di 200 micron e ad un 6 m / min velocità di rivestimento. Uso circa 0,5 mL di una maschera di 3 cm x 5 cm. eseguire °è processo sotto la cappa. </li></ol></li><li> Delicatamente trasferire il tessuto alla maschera PDMS rivestita. Lasciare per 10 min, dopo di che i PDMS dovrebbero essere pienamente assorbiti nella struttura tessile. </li><li> Curare il campione in un atmosferica a 100 ° C per 10 min. </li><li> Preparare il polimero conduttore: PEDOT PSS dispersione (80 mL), glicol etilenico (20 mL), acido 4-dodecilbenzensolfonico (40 mL), e 3-metacrilossipropiltrimetossisilano (1 mL) nella cappa. </li><li> Spazzola-coat la PEDOT: soluzione PSS sull&#39;area-PDMS libere del tessuto fino ad una penetrazione omogenea della soluzione ottenuta. Ripetere questo passaggio per ottenere un modello di colore uniforme. Applicare circa 1 ml / cm 2. </li><li> Cure tessuto a 110 ° C per 1 h per asciugare il PEDOT: soluzione PSS. Ridurre la temperatura a 60 ° C per tessuti che sono sensibili al trattamento ad alta temperatura, come il nylon. </li></ol> 2. fabbricazione di dispositivi organici NOTA: Il protocollo nella sezione 1 describes la deposizione selettiva di materiali conduttori sul tessile. Le sezioni seguenti descrivono gli ulteriori passi necessari per fabbricare dispositivi organici, come i sensori stretch, transistor OECT, elettrodi cutanei e sensori capacitivi. <ol><li> Per fabbricare sensori stirata, mostrati in figura 3a, modello dei cavi degli elettrodi sul tessuto, come descritto al punto 1, punti 1.1-1.5. NOTA: Un esempio del modello di progettazione è mostrato in figura 3a. La fabbricazione di tali sensori non richiede alcuna operazione aggiuntiva. </li><li> Per realizzare il progetto transistore mostrato in Figura 3b, modello gli array di transistor su un nastro di nylon tessuto seguendo la procedura descritta nella sezione 1. modificare leggermente la ricottura PDMS e PEDOT PSS curare misure per evitare la degradazione termica di nylon da una cottura a 60 ° C per un tempo più lungo. </li><li> Per la fabbricazione di elettrodi cutanei, illustrata nella figura 3c, depositare unogel ionico sulla PEDOT fantasia: tessile PSS. <ol><li> Preparare una miscela gel liquido ionico contenente il liquido ionico, 1-etil-3-methylimidazolium-etil solfato; l&#39;agente reticolante, poli (etilene glicol) diacrilato; e il fotoiniziatore, 2-idrossi-2-methylpropiophenone a (v / v) rapporto 0,6 / 0,35 / 0,05, rispettivamente. </li><li> Rivestire la PEDOT: elettrodi PSS con liquido ionico (20 l / cm 2) e aggiungere la miscela di gel liquido ionico a partire dal punto 2.3.1 (25 ml / cm 2) a goccia casting. </li><li> Esporre alla luce UV (365 nm) per avviare una reazione di reticolazione per 10-15 minuti, fino a quando i solidifica gel. Eseguire questo passaggio nella cappa. Utilizzare una gabbia di protezione UV durante l&#39;esposizione ai raggi UV. </li></ol></li><li> Per capacitivo fabbricazione del sensore, utilizzare PEDOT: elettrodi tessili PSS coibentati con materiale isolante (figura 3d). <ol><li> Isolare la tastiera simile PEDOT: elettrodi PSS utilizzando i PDMS; il design della tastiera può essere visto in Figura 2b &lt;/ Strong&gt;. Distribuire la formulazione PDMS sulla parte superiore del tessuto e rimuovere l&#39;eccesso con una spatola. </li><li> Posizionare il tessuto in un forno a 100 ° C per 10 min. Eseguire questo passaggio nella cappa. </li></ol></li></ol>

<ol>
	<li>Poupyrev, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Project+Jacquard:Interactive+Digital+Textiles+at+Scale.">Project Jacquard:Interactive Digital Textiles at Scale.</a> Proceedings of the 2016 CHI Conference on Human Factors in Computing Systems - CHI '16. , 4216-4227 (2016).</li><li>Takamatsu, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transparent+conductive-polymer+strain+sensors+for+touch+input+sheets+of+flexible+displays.">Transparent conductive-polymer strain sensors for touch input sheets of flexible displays.</a> J. Micromech. Microeng. 20, 075017 (2010).</li><li>Patel, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+of+wearable+sensors+and+systems+with+application+in+rehabilitation.">A review of wearable sensors and systems with application in rehabilitation.</a> J. Neuroeng. Rehabil. 9, 21 (2012).</li><li>Bandodkar, A. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Epidermal+tattoo+potentiometric+sodium+sensors+with+wireless+signal+transduction+for+continuous+non-invasive+sweat+monitoring.">Epidermal tattoo potentiometric sodium sensors with wireless signal transduction for continuous non-invasive sweat monitoring.</a> Biosens. Bioelectron. 54, 603-609 (2014).</li><li>Owens, R. M., Malliaras, G. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Organic+Electronics+at+the+Interface+with+Biology.">Organic Electronics at the Interface with Biology.</a> MRS Bull. 35 (6), 449-456 (2010).</li><li>Krebs, F. C., Biancardo, M., Winther-Jensen, B., Spanggard, H., Alstrup, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strategies+for+incorporation+of+polymer+photovoltaics+into+garments+and+textiles.">Strategies for incorporation of polymer photovoltaics into garments and textiles.</a> Sol. Energy Mater. Sol. Cells. 90, 1058-1067 (2006).</li><li>Cherenack, K., Zysset, C., Kinkeldei, T., M&#252;nzenrieder, N., Tr&#246;ster, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Woven+electronic+fibers+with+sensing+and+display+functions+for+smart+textiles.">Woven electronic fibers with sensing and display functions for smart textiles.</a> Adv. Mater. 22, 5178-5182 (2010).</li><li>Hamedi, M., Forchheimer, R., Ingan&#228;s, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Towards+woven+logic+from+organic+electronic+fibres.">Towards woven logic from organic electronic fibres.</a> Nat. Mater. 6, 357-362 (2007).</li><li>Bao, L., Li, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Towards+Textile+Energy+Storage+from+Cotton+T-Shirts.">Towards Textile Energy Storage from Cotton T-Shirts.</a> Adv. Mater. 24, 3246-3252 (2012).</li><li>Takamatsu, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+patterning+of+organic+conductors+on+knitted+textiles+for+long-term+electrocardiography.">Direct patterning of organic conductors on knitted textiles for long-term electrocardiography.</a> Sci. Rep. 5, 15003 (2015).</li><li>Yamada, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+stretchable+carbon+nanotube+strain+sensor+for+human-motion+detection.">A stretchable carbon nanotube strain sensor for human-motion detection.</a> Nat. Nanotechnol. 6, 296-301 (2011).</li><li>Shim, N. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=All-plastic+electrochemical+transistor+for+glucose+sensing+using+a+ferrocene+mediator.">All-plastic electrochemical transistor for glucose sensing using a ferrocene mediator.</a> Sensors. 9, 9896-9902 (2009).</li><li>Takamatsu, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Wearable+Keyboard+Using+Conducting+Polymer+Electrodes+on+Textiles.">Wearable Keyboard Using Conducting Polymer Electrodes on Textiles.</a> Adv. Mater. 28, 4485-4488 (2016).</li><li>O'Connor, T. F., Rajan, K. M., Printz, A. D., Lipomi, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Toward+organic+electronics+with+properties+inspired+by+biological+tissue.">Toward organic electronics with properties inspired by biological tissue.</a> J. Mater. Chem. B. 3, 4947-4952 (2015).</li><li>Choi, S., Lee, H., Ghaffari, R., Hyeon, T., Kim, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+Advances+in+Flexible+and+Stretchable+Bio-Electronic+Devices+Integrated+with+Nanomaterials.">Recent Advances in Flexible and Stretchable Bio-Electronic Devices Integrated with Nanomaterials.</a> Adv. Mater. 28, 4203-4218 (2016).</li><li>Zhang, Z., Qiu, J., Wang, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Roll-to-roll+printing+of+flexible+thin-film+organic+thermoelectric+devices.">Roll-to-roll printing of flexible thin-film organic thermoelectric devices.</a> Manuf. Lett. 8, 6-10 (2016).</li><li>Rim, Y. S., Bae, S. -. H., Chen, H., De Marco, N., Yang, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+Progress+in+Materials+and+Devices+toward+Printable+and+Flexible+Sensors.">Recent Progress in Materials and Devices toward Printable and Flexible Sensors.</a> Adv. Mater. 28, 4415-4440 (2016).</li><li>Matsuhisa, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Printable+elastic+conductors+with+a+high+conductivity+for+electronic+textile+applications.">Printable elastic conductors with a high conductivity for electronic textile applications.</a> Nat. Commun. 6, 7461 (2015).</li><li>Bernards, D. a., Malliaras, G. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Steady-State+and+Transient+Behavior+of+Organic+Electrochemical+Transistors.">Steady-State and Transient Behavior of Organic Electrochemical Transistors.</a> Adv. Funct. Mater. 17 (17), 3538-3544 (2007).</li></ol>

The authors have nothing to disclose.

Il patterning di materiali conduttori è uno dei primi passi nella fabbricazione di dispositivi elettronici funzionali. Questo può diventare difficile, come il processo di fabbricazione deve tener conto delle proprietà chimiche e fisiche di tali materiali, e il flusso di processo deve considerare il materiale trasversale compatibilità tra le fasi di fabbricazione. Nella microfabbricazione di dispositivi elettronici organici, questi due aspetti sono ancora più significativi a causa della natura altamente reattiva di ...

Il campo di elettronica indossabile è un mercato in rapida crescita dovrebbe essere del valore di 50 miliardi di euro nel 2025, più di tre volte il mercato attuale. La sfida principale per dispositivi indossabili attuale è che solidi allegati elettronici intrusive limitano l&#39;utilizzo di dispositivi stabiliti nei sistemi indossabili. Utilizzando tessuti che sono già presenti nella vita quotidiana è un approccio molto attraente e semplice per evitare questa limitazione. Grazie alla sua capacità elastica, alcune parti dell&#39;indumento che indossiamo sono naturalmente in stretto contatto con la pelle. Molti esempi di abiti eleganti disponibili oggi sul mercato si basano su, display sottili di plastica, tastiere e dispositivi di sorgente di luce incorporati nei tessuti, che collega l&#39;elettronica con gli esseri umani in un modo alla moda 1. In pratica lo sport, monitoraggio della salute si basa su elettrodi tessili, che offrono alternative comode da utilizzati comunemente elettrodi adesivi e braccialetti di metallo. Qui, fibre conduttive sonodirettamente integrato con tessuti elastici per evitare irritazioni della pelle e altri disagi durante l&#39;utilizzo prolungato. Inoltre, tessili offrono una serie di opportunità di integrare sensori curvatura per catturare il movimento 2, per integrare i sensori di taglio per lo sviluppo di attuatori robotici funzionali 3, e certamente integrare biosensori attraverso la rivelazione di un analita nel sudore 4. La moderna tecnologia indossabile si basa su materiali semiconduttori a base di carbonio che forniscono dispositivi elettronici con proprietà uniche. La natura &quot;soft&quot; di sostanze organiche offre migliori proprietà meccaniche per l&#39;interfacciamento con il corpo umano rispetto alla elettronica a stato solido tradizionali. Questa compatibilità meccanica, in coppia con substrati flessibili meccanicamente, consente l&#39;impiego di fattori di forma non planari in dispositivi quali tessili. L&#39;uso di sostanze organiche è rilevante anche nelle scienze della vita a causa della loro ele mistactronic e ionici conducibilità 5. Inoltre, semiconduttori organici e materiali optoelettronici potenziare una grande varietà di dispositivi funzionali con display, transistor, logica e capacità di potenza 6, 7, 8, 9. La principale difficoltà nella fabbricazione di tali dispositivi organici è la deposizione controllata di materiali funzionali sulle superfici non planari di tessuti. tecniche di microfabbricazione convenzionali sono essenzialmente limitati dalla incompatibilità del processo di deposizione con la dimensionalità strutturale di substrati tessili. Qui, descriviamo un semplice e scalabile protocollo di fabbricazione che consente la deposizione selettiva di polimeri conduttori su tessuti strutturati. Il processo presentato permette la fabbricazione di dispositivi elettronici indossabili e conformazionale. L&#39;approccio è basato sulla patterning del commercially disponibili conduzione poli polimero (3,4-ethylenedioxythiophene): poli (stirene solfonato) (PEDOT PSS) e un polidimetilsilossano materiale elastomerico stencil (PDMS) sulla tessile. Questa combinazione permette il confinamento efficiente del PEDOT acquosa: soluzione PSS, nonché per la conservazione delle proprietà morbido ed estensibile di tessuti. Questo metodo di fabbricazione semplice ed affidabile apre la strada per la fabbricazione di una varietà di dispositivi elettronici direttamente sui tessuti in modo economicamente efficiente e industrialmente scalabile.

<table><tbody><tr><td>SYLGARD 184, Silicone elastomer kit (Base and Curing agent)</td><td>Dow Corning</td><td></td><td>PDMS elastomer</td></tr><tr><td colspan="4">&lt;strong&gt;The conducting polymer formulation&lt;/strong&gt;</td></tr><tr><td>CleviosTM PH 1000 PEDOT:PSS</td><td>Heraeus</td><td></td><td>Conductive polymer</td></tr><tr><td>Ethylene glycol</td><td>Sigma-Aldrich</td><td>03750-250ML</td><td>Solvent (EG), CAS: 107-21-1</td></tr><tr><td>3-methacryloxypropyltrimethoxysilane</td><td>Sigma-Aldrich</td><td>M6514</td><td>Cros linker (GOPs), CAS: 2530-85-0</td></tr><tr><td>4-dodecylbenzenesulfonic acid</td><td>Sigma-Aldrich</td><td>44198</td><td>DBSA; CAS: 121-65-3</td></tr><tr><td colspan="4">&lt;strong&gt;The ionic liquid gel&lt;/strong&gt;</td></tr><tr><td>UV lamp DFE 2340</td><td>C.I.F/ ATHELEC</td><td>DP134</td><td>UV-365 nm</td></tr><tr><td>1-Ethyl-3-methylimidazolium ethyl sulfate</td><td>Sigma-Aldrich</td><td>51682-100G-F</td><td>Ionic Liquid (IL), CAS: 342573-75-5</td></tr><tr><td>Poly(ethylene glycol) diacrylate</td><td>Sigma-Aldrich</td><td>455008-100ML</td><td>Mn 700, CAS: 26570-48-9</td></tr><tr><td>2-Hydroxy-2-methylpropiophenon</td><td>Sigma-Aldrich</td><td>405655-50ML</td><td>Phot Initiator (PI), CAS: 7473-98-5</td></tr><tr><td>The textile fabric</td><td>VWR</td><td>Spec-Wipe 7 Wipers</td><td>100% interlock knit polyester fabric</td></tr><tr><td>The polyimide film</td><td>DuPont</td><td>HN100</td><td>Polyimide film with 125 &amp;micro;m thickness</td></tr></tbody></table>

a simple and scalable fabrication method for organic electronic devices on textiles

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices cannot be worn under everyday conditions. Therefore, textiles are commonly considered the best substrate to accommodate electronic devices in wearable use. In this paper, we describe how to selectively pattern organic electroactive materials on textiles from a solution in an easy and scalable manner. This versatile deposition technique enables the fabrication of wearable organic electronic devices on clothes.

I metodi tradizionali per l&#39;applicazione di colori o modelli di tessuti si affidano a strati di mascheramento rimovibili per consentire la deposizione selettiva di coloranti. Nella figura 1, mostriamo l&#39;adattamento di un tale approccio alla patterning di PEDOT: elettrodi PSS sui tessuti. Come strato di mascheratura, abbiamo usato polidimetilsilossano idrofobico, che può trattenere la diffusione non controllabile della PEDOT acquosa: soluzione PSS. Inoltre, la mo...

Watch this Scientific Journal Video about A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles at JoVE.com

A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

In questo articolo, vi presentiamo un protocollo per depositare selettivamente materiali organici sui tessuti, che consente l&#39;integrazione diretta di dispositivi elettronici organici con indossabili. I dispositivi fabbricati possono essere pienamente integrati nel settore tessile, rispettando il loro aspetto meccanico e consentendo capacità di rilevamento.

Un metodo semplice e scalabile di fabbricazione per dispositivi elettronici organici sui tessili

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices ...

a-simple-scalable-fabrication-method-for-organic-electronic-devices

Research

JoVE Journal

Bioengineering

10.4K Views.  Ecole Nationale Supérieure des Mines de Saint-Étienne, CMP-EMSE, MOC.  In questo articolo, vi presentiamo un protocollo per depositare selettivamente materiali organici sui tessuti, che consente l'integrazione diretta di dispositivi elettronici organici con indossabili. I dispositivi fabbricati possono essere pienamente integrati nel settore tessile, rispettando il loro aspetto meccanico e consentendo capacità di rilevamento. 

Video: A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

Soft Lithographic Functionalization and Patterning Oxide-free Silicon and Germanium

The development of hybrid electronic devices relies in large part on the integration of (bio)organic materials and inorganic semiconductors through a stable interface that permits efficient electron transport and protects underlying substrates from oxidative degradation. Group IV semiconductors can be effectively protected with highly-ordered self-assembled monolayers (SAMs) composed of simple alkyl chains that act as impervious barriers to both organic and aqueous solutions. Simple alkyl SAMs, however, are inert and not amenable to traditional patterning techniques. The motivation for immobilizing organic molecular systems on semiconductors is to impart new functionality to the surface that can provide optical, electronic, and mechanical function, as well as chemical and biological activity. 
Microcontact printing (&mu;CP) is a soft-lithographic technique for patterning SAMs on myriad surfaces.1-9 Despite its simplicity and versatility, the approach has been largely limited to noble metal surfaces and has not been well developed for pattern transfer to technologically important substrates such as oxide-free silicon and germanium. Furthermore, because this technique relies on the ink diffusion to transfer pattern from the elastomer to substrate, the resolution of such traditional printing is essentially limited to near 1 &mu;m.10-16
In contrast to traditional printing, inkless &mu;CP patterning relies on a specific reaction between a surface-immobilized substrate and a stamp-bound catalyst. Because the technique does not rely on diffusive SAM formation, it significantly expands the diversity of patternable surfaces. In addition, the inkless technique obviates the feature size limitations imposed by molecular diffusion, facilitating replication of very small (&lt;200 nm) features.17-23 However, up till now, inkless &mu;CP has been mainly used for patterning relatively disordered molecular systems, which do not protect underlying surfaces from degradation.
Here, we report a simple, reliable high-throughput method for patterning passivated silicon and germanium with reactive organic monolayers and demonstrate selective functionalization of the patterned substrates with both small molecules and proteins. The technique utilizes a preformed NHS-reactive bilayered system on oxide-free silicon and germanium. The NHS moiety is hydrolyzed in a pattern-specific manner with a sulfonic acid-modified acrylate stamp to produce chemically distinct patterns of NHS-activated and free carboxylic acids. A significant limitation to the resolution of many &mu;CP techniques is the use of PDMS material which lacks the mechanical rigidity necessary for high fidelity transfer. To alleviate this limitation we utilized a polyurethane acrylate polymer, a relatively rigid material that can be easily functionalized with different organic moieties. Our patterning approach completely protects both silicon and germanium from chemical oxidation, provides precise control over the shape and size of the patterned features, and gives ready access to chemically discriminated patterns that can be further functionalized with both organic and biological molecules. The approach is general and applicable to other technologically-relevant surfaces.

Here we describe a simple method for patterning oxide-free silicon and germanium with reactive organic monolayers and demonstrate functionalization of the patterned substrates with small molecules and proteins. The approach completely protects surfaces from chemical oxidation, provides precise control over feature morphology, and provides ready access to chemically discriminated patterns.

Morbido Funzionalizzazione litografica e Patterning ossido senza silicio e germanio

The development of hybrid electronic devices relies in large part on the integration of (bio)organic materials and inorganic semiconductors through a ...

Ricerca

Bioingegneria

Fabrication of Large-area Free-standing Ultrathin Polymer Films

This procedure describes a method for the fabrication of large-area and ultrathin free-standing polymer films. Typically, ultrathin films are prepared using either sacrificial layers, which may damage the film or affect its mechanical properties, or they are made on freshly cleaved mica, a substrate that is difficult to scale. Further, the size of ultrathin film is typically limited to a few square millimeters. In this method, we modify a surface with a polyelectrolyte that alters the strength of adhesion between polymer and deposition substrate. The polyelectrolyte can be shown to remain on the wafer using spectroscopy, and a treated wafer can be used to produce multiple films, indicating that at best minimal amounts of the polyelectrolyte are added to the film. The process has thus far been shown to be limited in scalability only by the size of the coating equipment, and is expected to be readily scalable to industrial processes. In this study, the protocol for making the solutions, preparing the deposition surface, and producing the films is described.

We describe a method for the fabrication of large-area (up to 13 cm diameter) and ultrathin (as thin as 8 nm) polymer films. Instead of using a sacrificial interlayer to delaminate the film from its substrate, we use a self-limiting surface treatment suitable for arbitrarily large areas.

Fabbricazione di ampia superficie Free-standing ultrasottili film polimerici

This procedure describes a method for the fabrication of large-area and ultrathin free-standing polymer films.  Typically, ultrathin films are prepared ...

Chimica

Microfabrication of Chip-sized Scaffolds for Three-dimensional Cell cultivation

Using microfabrication technologies is a prerequisite to create scaffolds of reproducible geometry and constant quality for three-dimensional cell cultivation. These technologies offer a wide spectrum of advantages not only for manufacturing but also for different applications. The size and shape of formed cell clusters can be influenced by the exact and reproducible architecture of the microfabricated scaffold and, therefore, the diffusion path length of nutrients and gases can be controlled.1 This is unquestionably a useful tool to prevent apoptosis and necrosis of cells due to an insufficient nutrient and gas supply or removal of cellular metabolites.
Our polymer chip, called CellChip, has the outer dimensions of 2 x 2 cm with a central microstructured area. This area is subdivided into an array of up to 1156 microcontainers with a typical dimension of 300 m edge length for the cubic design (cp- or cf-chip) or of 300 m diameter and depth for the round design (r-chip).2
So far, hot embossing or micro injection moulding (in combination with subsequent laborious machining of the parts) was used for the fabrication of the microstructured chips. Basically, micro injection moulding is one of the only polymer based replication techniques that, up to now, is capable for mass production of polymer microstructures.3 However, both techniques have certain unwanted limitations due to the processing of a viscous polymer melt with the generation of very thin walls or integrated through holes. In case of the CellChip, thin bottom layers are necessary to perforate the polymer and provide small pores of defined size to supply cells with culture medium e.g. by microfluidic perfusion of the containers.
In order to overcome these limitations and to reduce the manufacturing costs we have developed a new microtechnical approach on the basis of a down-scaled thermoforming process. For the manufacturing of highly porous and thin walled polymer chips, we use a combination of heavy ion irradiation, microthermoforming and track etching. In this so called "SMART" process (Substrate Modification And Replication by Thermoforming) thin polymer films are irradiated with energetic heavy projectiles of several hundred MeV introducing so-called "latent tracks" Subsequently, the film in a rubber elastic state is formed into three dimensional parts without modifying or annealing the tracks. After the forming process, selective chemical etching finally converts the tracks into cylindrical pores of adjustable diameter.

We present two processes for the microfabrication of porous polymer chips for three-dimensional cell cultivation. The first one is hot embossing combined with a solvent vapour welding process. The second one uses a recently developed microthermoforming process combined with ion track technology leading to a significant simplification of manufacture.

Microfabbricazione di chip di dimensioni Ponteggi per tridimensionale coltura cellulare

Using microfabrication technologies is a prerequisite to create scaffolds of reproducible geometry and constant quality for three-dimensional cell ...

Biologia

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Polymer-based materials hold promise as low-cost, flexible efficient photovoltaic devices. Most laboratory efforts to achieve high performance devices have used devices prepared by spin coating, a process that is not amenable to large-scale fabrication. This mismatch in device fabrication makes it difficult to translate quantitative results obtained in the laboratory to the commercial level, making optimization difficult. Using a mini-slot die coater, this mismatch can be resolved by translating the commercial process to the laboratory and characterizing the structure formation in the active layer of the device in real time and in situ as films are coated onto a substrate. The evolution of the morphology was characterized under different conditions, allowing us to propose a mechanism by which the structures form and grow. This mini-slot die coater offers a simple, convenient, material efficient route by which the morphology in the active layer can be optimized under industrially relevant conditions. The goal of this protocol is to show experimental details of how a solar cell device is fabricated using a mini-slot die coater and technical details of running in situ structure characterization using the mini-slot die coater.

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Here, we present a protocol to fabricate organic thin film solar cells using a mini-slot die coater and related in-line structure characterizations using synchrotron scattering techniques.

La stampa Fabbricazione di massa eterogiunzione celle solari e<em&gt; In Situ</em&gt; Morfologia Caratterizzazione

Polymer-based materials hold promise as low-cost, flexible efficient photovoltaic devices. Most laboratory efforts to achieve high performance devices ...

Ingegneria

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices

We demonstrate a method for the preparation of fully solution processed inorganic solar cells from a spin and spray coating deposition of nanocrystal inks. For the photoactive absorber layer, colloidal CdTe and CdSe nanocrystals (3-5 nm) are synthesized using an inert hot injection technique and cleaned with precipitations to remove excess starting reagents. Similarly, gold nanocrystals (3-5 nm) are synthesized under ambient conditions and dissolved in organic solvents. In addition, precursor solutions for transparent conductive indium tin oxide (ITO) films are prepared from solutions of indium and tin salts paired with a reactive oxidizer. Layer-by-layer, these solutions are deposited onto a glass substrate following annealing (200-400 &#176;C) to build the nanocrystal solar cell (glass/ITO/CdSe/CdTe/Au). Pre-annealing ligand exchange is required for CdSe and CdTe nanocrystals where films are dipped in NH4Cl:methanol to replace long-chain native ligands with small inorganic Cl- anions. NH4Cl(s) was found to act as a catalyst for the sintering reaction (as a non-toxic alternative to the conventional CdCl2(s) treatment) leading to grain growth (136&#177;39 nm) during heating. The thickness and roughness of the prepared films are characterized with SEM and optical profilometry. FTIR is used to determine the degree of ligand exchange prior to sintering, and XRD is used to verify the crystallinity and phase of each material. UV/Vis spectra show high visible light transmission through the ITO layer and a red shift in the absorbance of the cadmium chalcogenide nanocrystals after thermal annealing. Current-voltage curves of completed devices are measured under simulated one sun illumination. Small differences in deposition techniques and reagents employed during ligand exchange have been shown to have a profound influence on the device properties. Here, we examine the effects of chemical (sintering and ligand exchange agents) and physical treatments (solution concentration, spray-pressure, annealing time and annealing temperature) on photovoltaic device performance.

This protocol describes the synthesis and solution deposition of inorganic nanocrystals layer by layer to produce thin film electronics on non-conductive surfaces. Solvent-stabilized inks can produce complete photovoltaic devices on glass substrates via spin and spray coating following post-deposition ligand exchange and sintering.

Fabbricazione di inorganici nanocristalli fotovoltaici dispositivi completamente Soluzione Processing

We demonstrate a method for the preparation of fully solution processed inorganic solar cells from a spin and spray coating deposition of nanocrystal ...

Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh

Here, the authors report the embedded metal-mesh transparent electrode (EMTE), a new transparent electrode (TE) with a metal mesh completely embedded in a polymer film. This paper also presents a low-cost, vacuum-free fabrication method for this novel TE; the approach combines lithography, electroplating, and imprint transfer (LEIT) processing. The embedded nature of the EMTEs offers many advantages, such as high surface smoothness, which is essential for organic electronic device production; superior mechanical stability during bending; favorable resistance to chemicals and moisture; and strong adhesion with plastic film. LEIT fabrication features an electroplating process for vacuum-free metal deposition and is favorable for industrial mass production. Furthermore, LEIT allows for the fabrication of metal mesh with a high aspect ratio (i.e., thickness to linewidth), significantly enhancing its electrical conductance without adversely losing optical transmittance. We demonstrate several prototypes of flexible EMTEs, with sheet resistances lower than 1 &#937;/sq and transmittances greater than 90%, resulting in very high figures of merit (FoM) &#8211; up to 1.5 x 104 &#8211; which are amongst the best values in the published literature.

This protocol describes a solution-based fabrication strategy for high-performance, flexible, transparent electrodes with fully-embedded, thick metal mesh. Flexible transparent electrodes fabricated by this process demonstrate among the highest reported performances, including ultra-low sheet resistance, high optical transmittance, mechanical stability under bending, strong substrate adhesion, surface smoothness, and environmental stability.

Strategia di Fabbricazione elaborata in soluzione scalabile per elettrodi ad alte prestazioni, flessibili e trasparenti con maglia metallica incorporata

Here, the authors report the embedded metal-mesh transparent electrode (EMTE), a new transparent electrode (TE) with a metal mesh completely embedded in a ...

Reactive Vapor Deposition of Conjugated Polymer Films on Arbitrary Substrates

We demonstrate a method of conformally coating conjugated polymers on arbitrary substrates using a custom-designed, low-pressure reaction chamber. Conductive polymers, poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-propylenedioxythiophene) (PProDOT), and a semiconducting polymer, poly(thieno[3,2-b]thiophene) (PTT), were deposited on unconventional highly-disordered and textured substrates with high surface areas, such as paper, towels and fabrics. This reported deposition chamber is an improvement of previous vapor reactors because our system can accommodate both volatile and nonvolatile monomers, such as 3,4-propylenedioxythiophene and thieno[3,2-b]thiophene. Utilization of both solid and liquid oxidants are also demonstrated. One limitation of this method is that it lacks sophisticated in situ thickness monitors. Polymer coatings made by the commonly used solution-based coating methods, such as spin-coating and surface grafting, are often not uniform or susceptible to mechanical degradation. This reported vapor phase deposition method overcomes those drawbacks and is a strong alternative to common solution-based coating methods. Notably, polymer films coated by the reported method are uniform and conformal on rough surfaces, even at a micrometer scale. This feature allows for future application of vapor deposited polymers in electronics devices on flexible and highly textured substrates.

This paper presents a protocol for reactive vapor deposition of poly(3,4-ethylenedioxythiophene), poly(3,4-propylenedioxythiophene), and poly(thieno[3,2-b]thiophene) films on glass slides and rough substrates, such as textiles and paper.

Deposizione di vapore reattiva di film polimerici coniugati su substrati arbitrari

We demonstrate a method of conformally coating conjugated polymers on arbitrary substrates using a custom-designed, low-pressure reaction chamber. ...

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

Flexible photodetectors have been intensely studied for the use of curved image sensors, which are a crucial component in bio-inspired imaging systems, but several challenging points remain, such as a low absorption efficiency due to a thin active layer and low flexibility. We present an advanced method to fabricate a flexible phototransistor array with an improved electrical performance. The outstanding electrical performance is driven by a low dark current owing to deep impurity doping. Stretchable and flexible metal interconnectors simultaneously offer electrical and mechanical stabilities in a highly deformed state. The protocol explicitly describes the fabrication process of the phototransistor using a thin silicon membrane. By measuring I-V characteristics of the completed device in deformed states, we demonstrate that this approach improves the mechanical and electrical stabilities of the phototransistor array. We expect that this approach to a flexible phototransistor can be widely used for the applications of not only next-generation imaging systems/optoelectronics but also wearable devices such as tactile/pressure/temperature sensors and health monitors.

We present a detailed method to fabricate a deformable lateral NIPIN phototransistor array for curved image sensors. The phototransistor array with an open mesh form, which is composed of thin silicon islands and stretchable metal interconnectors, provides flexibility and stretchability. The parameter analyzer characterizes the electrical property of the fabricated phototransistor.

Fabbricazione di sensore di immagine flessibile basato su Francesca laterale fototransistori

Flexible photodetectors have been intensely studied for the use of curved image sensors, which are a crucial component in bio-inspired imaging systems, ...

Hybrid Printing for the Fabrication of Smart Sensors

A method to combine additively manufactured substrates or foils and multilayer inkjet printing for the fabrication of sensor devices is presented. First, three substrates (acrylate, ceramics, and copper) are prepared. To determine the resulting material properties of these substrates, profilometer, contact angle, scanning electron microscope (SEM), and focused ion beam (FIB) measurements are done. The achievable printing resolution and suitable drop volume for each substrate are, then, found through the drop size tests. Then, layers of insulating and conductive ink are inkjet printed alternately to fabricate the target sensor structures. After each printing step, the respective layers are individually treated by photonic curing. The parameters used for the curing of each layer are adapted depending on the printed ink, as well as on the surface properties of the respective substrate. To confirm the resulting conductivity and to determine the quality of the printed surface, four-point probe and profilometer measurements are done. Finally, a measurement set-up and results achieved by such an all-printed sensor system are shown to demonstrate the achievable quality.

Here we present a protocol for the fabrication of inkjet-printed multilayer sensor structures on additively manufactured substrates and foil.

Ibrido di stampa per la fabbricazione di sensori intelligenti

A method to combine additively manufactured substrates or foils and multilayer inkjet printing for the fabrication of sensor devices is presented. First, ...

Scalable Fabrication of Stretchable, Dual Channel, Microfluidic Organ Chips

A significant number of lead compounds fail in the pharmaceutical pipeline because animal studies often fail to predict clinical responses in human patients. Human Organ-on-a-Chip (Organ Chip) microfluidic cell culture devices, which provide an experimental in vitro platform to assess efficacy, toxicity, and pharmacokinetic (PK) profiles in humans, may be better predictors of therapeutic efficacy and safety in the clinic compared to animal studies. These devices may be used to model the function of virtually any organ type and can be fluidically linked through common endothelium-lined microchannels to perform in vitro studies on human organ-level and whole body-level physiology without having to conduct experiments on people. These Organ Chips consist of two perfused microfluidic channels separated by a permeable elastomeric membrane with organ-specific parenchymal cells on one side and microvascular endothelium on the other, which can be cyclically stretched to provide organ-specific mechanical cues (e.g., breathing motions in lung). This protocol details the fabrication of flexible, dual channel, Organ Chips through casting of parts using 3D printed molds, enabling combination of multiple casting and post-processing steps. Porous poly (dimethyl siloxane) (PDMS) membranes are cast with micrometer sized through-holes using silicon pillar arrays under compression. Fabrication and assembly of Organ Chips involves equipment and steps that can be implemented outside of a traditional cleanroom. This protocol provides researchers with access to Organ Chip technology for in vitro organ- and body-level studies in drug discovery, safety and efficacy testing, as well as mechanistic studies of fundamental biological processes.

Here, we present a protocol that describes the fabrication of stretchable, dual channel, organ chip microfluidic cell culture devices for recapitulating organ-level functionality in vitro.

Fabbricazione scalabile di Stretchable, Dual Channel, organo di Microfluidic chip

A significant number of lead compounds fail in the pharmaceutical pipeline because animal studies often fail to predict clinical responses in human ...