We thank Dr. Hasan Yardimci and Dr.Sevim Yardimci of the Francis Crick Institute for kind help in the single-molecule experiments, Dr. Daniel Duzdevich from Dr. Eric C. Greene&#39;s lab of Columbia University, Dr. Yujie Sun of Peking University and Dr. Chunlai Chen of Tsinghua University for useful discussion. This study was supported by the National Natural Science Foundation of China 31371264, 31401059, CAS Interdisciplinary Innovation Team and the Newton Advanced Fellowship (NA140085) from the Royal Society.

1. Preparation of &#955;-ARS317 DNA substrate
<ol>
	<li>DNA substrate construction and packaging
	<ol>
		<li>Digest native &#955; DNA using XhoI enzyme; amplify a 543 bp DNA fragment bearing ARS317 from the genomic DNA of budding yeast using primers containing 20 bp homologous sequences of upstream and downstream of XhoI enzyme site on lambda DNA. Add 100 ng of XhoI digested &#955; DNA and 10 ng of DNA fragment to 10 &#181;L of homologous recombination reaction system, and incubate the reacti...

<ol>
	<li>Fu, Y. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Selective+Bypass+of+a+Lagging+Strand+Roadblock+by+the+Eukaryotic+Replicative+DNA+Helicase.">Selective Bypass of a Lagging Strand Roadblock by the Eukaryotic Replicative DNA Helicase.</a> Cell. 146 (6), 930-940 (2011).</li><li>Qi, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+sequence+alignment+by+microhomology+sampling+during+homologous+recombination.">DNA sequence alignment by microhomology sampling during homologous recombination.</a> Cell. 160 (5), 856-869 (2015).</li><li>Chong, S., Chen, C., Ge, H., Xie, X. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanism+of+transcriptional+bursting+in+bacteria.">Mechanism of transcriptional bursting in bacteria.</a> Cell. 158 (2), 314-326 (2014).</li><li>Wegner, K. D., Hildebrandt, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantum+dots:+bright+and+versatile+in+vitro+and+in+vivo+fluorescence+imaging+biosensors.">Quantum dots: bright and versatile in vitro and in vivo fluorescence imaging biosensors.</a> Chemical Society Reviews. 44 (14), 4792-4834 (2015).</li><li>Gao, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+molecular+and+cellular+imaging+with+quantum+dots.">In vivo molecular and cellular imaging with quantum dots.</a> Current opinion in biotechnology. 16 (1), 63-72 (2005).</li><li>Sternberg, S. H., Redding, S., Jinek, M., Greene, E. C., Doudna, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+interrogation+by+the+CRISPR+RNA-guided+endonuclease+Cas9.">DNA interrogation by the CRISPR RNA-guided endonuclease Cas9.</a> Nature. 507 (7490), 62 (2014).</li><li>Lee, J. Y., Finkelstein, I. J., Arciszewska, L. K., Sherratt, D. J., Greene, E. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-molecule+imaging+of+FtsK+translocation+reveals+mechanistic+features+of+protein-protein+collisions+on+DNA.">Single-molecule imaging of FtsK translocation reveals mechanistic features of protein-protein collisions on DNA.</a> Molecular cell. 54 (5), 832-843 (2014).</li><li>Wang, H., Tessmer, I., Croteau, D. L., Erie, D. A., Van Houten, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+characterization+and+atomic+force+microscopy+of+a+DNA+repair+protein+conjugated+to+a+quantum+dot.">Functional characterization and atomic force microscopy of a DNA repair protein conjugated to a quantum dot.</a> Nano letters. 8 (6), 1631-1637 (2008).</li><li>Redding, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surveillance+and+processing+of+foreign+DNA+by+the+Escherichia+coli+CRISPR-Cas+system.">Surveillance and processing of foreign DNA by the Escherichia coli CRISPR-Cas system.</a> Cell. 163 (4), 854-865 (2015).</li><li>Xue, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Utilizing+Biotinylated+Proteins+Expressed+in+Yeast+to+Visualize+DNA-Protein+Interactions+at+the+Single-Molecule+Level.">Utilizing Biotinylated Proteins Expressed in Yeast to Visualize DNA-Protein Interactions at the Single-Molecule Level.</a> Frontiers in microbiology. 8, 2062 (2017).</li><li>Duzdevich, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+dynamics+of+eukaryotic+replication+initiation:+origin+specificity,+licensing,+and+firing+at+the+single-molecule+level.">The dynamics of eukaryotic replication initiation: origin specificity, licensing, and firing at the single-molecule level.</a> Molecular cell. 58 (3), 483-494 (2015).</li><li>Hughes, C. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Real-time+single-molecule+imaging+reveals+a+direct+interaction+between+UvrC+and+UvrB+on+DNA+tightropes.">Real-time single-molecule imaging reveals a direct interaction between UvrC and UvrB on DNA tightropes.</a> Nucleic acids research. 41 (9), 4901-4912 (2013).</li><li>Kad, N. M., Wang, H., Kennedy, G. G., Warshaw, D. M., Van Houten, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Collaborative+dynamic+DNA+scanning+by+nucleotide+excision+repair+proteins+investigated+by+single-molecule+imaging+of+quantum-dot-labeled+proteins.">Collaborative dynamic DNA scanning by nucleotide excision repair proteins investigated by single-molecule imaging of quantum-dot-labeled proteins.</a> Molecular cell. 37 (5), 702-713 (2010).</li><li>Chandradoss, S. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surface+Passivation+for+Single-molecule+Protein+Studies.">Surface Passivation for Single-molecule Protein Studies.</a> Jove-Journal of Visualized Experiments. (86), (2014).</li><li>Chen, X. Q., Zhao, E. S., Fu, Y. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Using+single-molecule+approach+to+visualize+the+nucleosome+assembly+in+yeast+nucleoplasmic+extracts.">Using single-molecule approach to visualize the nucleosome assembly in yeast nucleoplasmic extracts.</a> Science Bulletin. 62 (6), 399-404 (2017).</li><li>Yardimci, H., Loveland, A. B., van Oijen, A. M., Walter, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-molecule+analysis+of+DNA+replication+in+Xenopus+egg+extracts.">Single-molecule analysis of DNA replication in Xenopus egg extracts.</a> Methods. 57 (2), 179-186 (2012).</li><li>Tanner, N. A., Loparo, J. J., van Oijen, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualizing+single-molecule+DNA+replication+with+fluorescence+microscopy.">Visualizing single-molecule DNA replication with fluorescence microscopy.</a> Journal of visualized experiments: JoVE. (32), (2009).</li><li>Lockett, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+bacteriophage+&#955;+DNA+purification+procedure+suitable+for+the+analysis+of+DNA+from+either+large+or+multiple+small+lysates.">A bacteriophage &#955; DNA purification procedure suitable for the analysis of DNA from either large or multiple small lysates.</a> Analytical biochemistry. 185 (2), 230-234 (1990).</li><li>Smith, E. A., Chen, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=How+to+prevent+the+loss+of+surface+functionality+derived+from+aminosilanes.">How to prevent the loss of surface functionality derived from aminosilanes.</a> Langmuir. 24 (21), 12405-12409 (2008).</li><li>Kim, Y., Torre, A., Leal, A. A., Finkelstein, I. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Efficient+modification+of+&#955;-DNA+substrates+for+single-molecule+studies.">Efficient modification of &#955;-DNA substrates for single-molecule studies.</a> Scientific reports. 7 (1), 2071 (2017).</li></ol>

Here, we present a protocol to observe the interaction between the Qdot-labeled protein and the site-specifically modified &#955; DNA using the TIRFM in a flow-cell. The necessary steps include site-specific modification of DNA substrate, DNA biotinylation, coverslip cleaning and functionalization, flow-cell preparation, and single-molecule imaging. There are two key points that should be noted. First, all the steps involved with &#955; DNA should be manipulated gently to decrease any possible damage, e.g., avoi...

Interactions between protein and DNA are essential to many complex biological processes, such as DNA replication, DNA repair, and transcription. Although conventional approaches have shed light on the properties of these processes, many key mechanisms are still unclear. Recently, with the rapidly developing single molecule techniques, some of the mechanisms have been addressed1,2,3.
The application of single-molecule fluorescence microscopy on visualizing protein-DNA interactions in real-time mainly depends on the development of fluorescence detection and fluorescent probes. For a single molecule study, it is important to label the protein of interest with a suitable fluorescent probe since fluorescence detection systems are mostly available commercially.
Fluorescent proteins are commonly used in molecular biology. However, the low fluorescent brightness and stability against photobleaching restrict its application in many single molecule assays. Quantum dots (Qdots) are tiny light-emitting nanoparticles4. Due to their unique optical properties, Qdots are 10 - 20 times brighter and several thousand times more stable than the widely used organic dyes5. Moreover, Qdots have a large Stokes shift (the difference between the position of excitation and emission peaks)5. Thus, Qdots can be used for long-time observation (minutes to hours) and acquisition of images with high signal-to-noise ratios, while they cannot be utilized in the quantitative assays.
To date, there are two approaches to label a target protein with Qdots site-specifically: labeling with the aid of Qdot-conjugated&#160;primary or secondary antibodies6,7,8; or labeling the target protein with Qdots directly, which is based on the strong interaction between biotin and streptavidin9,10,11,12,13. Streptavidin-coated Qdots are commercially available. In our recent study, site-specifically biotinylated proteins in budding yeast with high efficiency were purified by co-overexpression of BirA and Avi-tagged proteins in vivo10. By following and optimizing the single-molecule assays14,15,16,17, we observed the interactions between Qdot-labeled proteins and DNA at the single molecule level using TIRFM10.
Here, we choose the budding yeast origin recognition complex (ORC), which can specifically recognize and bind to the autonomously replicating sequence (ARS), as our protein of interest. The following protocol presents a step-by-step procedure of visualizing the interaction of Qdot-labeled ORC with ARS using TIRFM. The preparation of the site-specifically modified DNA substrate, the DNA biotinylation, the coverslip cleaning and functionalization, the flow-cell assembly, and the single-molecule imaging are described.

<table>
	<tbody>
		<tr>
			<td>Lambda DNA</td>
			<td>New England Biolabs</td>
			<td>N3011</td>
			<td>Store 25 &#956;L aliquots at -20 &#186;C.</td>
		</tr>
		<tr>
			<td>XhoI enzyme</td>
			<td>Thermo Fisher Scientific</td>
			<td>FD0694</td>
			<td></td>
		</tr>
		<tr>
			<td>Quick-fusion cloning kit</td>
			<td>Biotool</td>
			<td>B22611</td>
			<td></td>
		</tr>
		<tr>
			<td>MaxPlax Lambda 
			Packaging Extracts</td>
			<td>Epicentre</td>
			<td>MP5110</td>
			<td>Bacterial strain LE392MP 
			is included in this package.</td>
		</tr>
		<tr>
			<td>MgSO4</td>
			<td>Sinopharm Chemical Reagent Co.,Ltd</td>
			<td>10013092</td>
			<td>Any brand is acceptable.</td>
		</tr>
		<tr>
			<td>Tris</td>
			<td>Amresco</td>
			<td>0497-5KG</td>
			<td></td>
		</tr>
		<tr>
			<td>NaCl</td>
			<td>Beijing Chemical works</td>
			<td>N/A</td>
			<td>Any brand is acceptable.</td>
		</tr>
		<tr>
			<td>MgCl2</td>
			<td>Sinopharm Chemical Reagent Co.,Ltd</td>
			<td>10012818</td>
			<td></td>
		</tr>
		<tr>
			<td>Chloroform</td>
			<td>Beijing Chemical works</td>
			<td>N/A</td>
			<td>Any brand is acceptable.</td>
		</tr>
		<tr>
			<td>NZ-amine</td>
			<td>Amresco</td>
			<td>J853-250G</td>
			<td></td>
		</tr>
		<tr>
			<td>Casamino acids</td>
			<td>Sigma-Aldrich</td>
			<td>22090-500G</td>
			<td></td>
		</tr>
		<tr>
			<td>PEG8000</td>
			<td>Beyotime</td>
			<td>ST483</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnetic stirring apparatus</td>
			<td>IKA</td>
			<td>KMO2 basic</td>
			<td></td>
		</tr>
		<tr>
			<td>15 mL Eppendorf tube</td>
			<td>Eppendorf</td>
			<td>30122151</td>
			<td>15 mL, sterile, bulk, 500pcs</td>
		</tr>
		<tr>
			<td>Rnase</td>
			<td>SIGMA</td>
			<td>R4875-100MG</td>
			<td></td>
		</tr>
		<tr>
			<td>Dnase</td>
			<td>SIGMA</td>
			<td>D5319-500UG</td>
			<td></td>
		</tr>
		<tr>
			<td>Proteinase K</td>
			<td>Amresco</td>
			<td>0706-100MG</td>
			<td></td>
		</tr>
		<tr>
			<td>Biotinylated primers</td>
			<td>Thermo Fisher Scientific</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr>
			<td>T4 DNA ligase, T4 DNA Ligase, Reaction Buffer (10x)</td>
			<td>New England Biolabs</td>
			<td>M0202</td>
			<td></td>
		</tr>
		<tr>
			<td>Coverslip</td>
			<td>Thermo Fisher Scientific</td>
			<td>22266882</td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol</td>
			<td>Sinopharm Chemical Reagent Co.,Ltd</td>
			<td>10009259</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium hydroxide (KOH)</td>
			<td>Sigma-Aldrich</td>
			<td>306568-100G</td>
			<td></td>
		</tr>
		<tr>
			<td>Acetone</td>
			<td>Thermo Fisher Scientific</td>
			<td>A949-4</td>
			<td></td>
		</tr>
		<tr>
			<td>H2SO4</td>
			<td>Sinopharm Chemical Reagent Co.,Ltd</td>
			<td>80120891</td>
			<td>sulfuric acid</td>
		</tr>
		<tr>
			<td>H2O2</td>
			<td>Sinopharm Chemical Reagent Co.,Ltd</td>
			<td>10011218</td>
			<td>30% Hydrogen peroxide</td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Sigma-Aldrich</td>
			<td>322415-2L</td>
			<td></td>
		</tr>
		<tr>
			<td>Acetic acid</td>
			<td>Sigma-Aldrich</td>
			<td>V900798</td>
			<td></td>
		</tr>
		<tr>
			<td>APTES</td>
			<td>Sigma-Aldrich</td>
			<td>A3648</td>
			<td></td>
		</tr>
		<tr>
			<td>mPEG 
			(methoxy-polyethylene glycol)</td>
			<td>Lysan</td>
			<td>mPEG-SVA-5000</td>
			<td></td>
		</tr>
		<tr>
			<td>biotin-PEG 
			(biotin-polyethylene glycol)</td>
			<td>Lysan</td>
			<td>Biotin-PEG-SVA-5000</td>
			<td></td>
		</tr>
		<tr>
			<td>NaHCO3</td>
			<td>Sigma-Aldrich</td>
			<td>31437-500G</td>
			<td></td>
		</tr>
		<tr>
			<td>Vacuum desiccator</td>
			<td>Tianjin Branch Billion Lung Experimental Equipment Co., Ltd.</td>
			<td>IPC250-1</td>
			<td></td>
		</tr>
		<tr>
			<td>Vacuum sealer</td>
			<td>MAGIC SEAL</td>
			<td>WP300</td>
			<td></td>
		</tr>
		<tr>
			<td>Diamond-tipped glass scribe</td>
			<td>ELECTRON MICROSCOPY SCIENCES</td>
			<td>70036</td>
			<td></td>
		</tr>
		<tr>
			<td>Glass slide</td>
			<td>Sail Brand</td>
			<td>7101</td>
			<td></td>
		</tr>
		<tr>
			<td>Inlet tubing</td>
			<td>SCI (Scientific Commodties INC.)</td>
			<td>BB31695-PE/2</td>
			<td>inner diameter 0.38 mm; outer diameter 1.09 mm.</td>
		</tr>
		<tr>
			<td>Outlet tubing</td>
			<td>SCI (Scientific Commodties INC.)</td>
			<td>BB31695-PE/4</td>
			<td>inner diameter 0.76 mm; outer diameter 1.22 mm.</td>
		</tr>
		<tr>
			<td>Double-sided tape</td>
			<td>Sigma-Aldrich</td>
			<td>GBL620001-1EA</td>
			<td></td>
		</tr>
		<tr>
			<td>Epoxy</td>
			<td>LEAFTOP</td>
			<td>9005</td>
			<td>five minutes epoxy</td>
		</tr>
		<tr>
			<td>Streptavidin</td>
			<td>Sigma-Aldrich</td>
			<td>S4762</td>
			<td></td>
		</tr>
		<tr>
			<td>Fluorescence Microscope</td>
			<td>Olympus</td>
			<td>IX71</td>
			<td></td>
		</tr>
		<tr>
			<td>Infusion/withdrawal 
			programmable pump</td>
			<td>Harvard apparatus</td>
			<td>70-4504</td>
			<td></td>
		</tr>
		<tr>
			<td>532 nm laser</td>
			<td>Coherent</td>
			<td>Sapphire-532-50</td>
			<td></td>
		</tr>
		<tr>
			<td>640 nm laser</td>
			<td>Coherent</td>
			<td>OBIS-640-100</td>
			<td></td>
		</tr>
		<tr>
			<td>EMCCD Camera</td>
			<td>Andor</td>
			<td>DU-897E-CS0-BV</td>
			<td></td>
		</tr>
		<tr>
			<td>W-View Gemini Imaging 
			splitting optics</td>
			<td>Hamamatsu photonics K.K.</td>
			<td>A12801-01</td>
			<td></td>
		</tr>
		<tr>
			<td>TIRF illumination system</td>
			<td>Olympus</td>
			<td>IX2-RFAEVA2</td>
			<td></td>
		</tr>
		<tr>
			<td>60&#215;TIRF objective</td>
			<td>Olympus</td>
			<td>APON60XOTIRF</td>
			<td></td>
		</tr>
		<tr>
			<td>Quad-edge laser dichroic 
			beamsplitter</td>
			<td>Semrock</td>
			<td>Di01-R405/488/ 
			532/635-25x36</td>
			<td></td>
		</tr>
		<tr>
			<td>Quad-band bandpass filter</td>
			<td>Semrock</td>
			<td>FF01-446/510/ 
			581/703-25</td>
			<td></td>
		</tr>
		<tr>
			<td>Dichroic beamsplitter</td>
			<td>Semrock</td>
			<td>FF649-Di01-25x36</td>
			<td></td>
		</tr>
		<tr>
			<td>Emission filter</td>
			<td>Chroma Technology Corp</td>
			<td>ET585/65m</td>
			<td></td>
		</tr>
		<tr>
			<td>Emission filter</td>
			<td>Chroma Technology Corp</td>
			<td>ET665lp</td>
			<td></td>
		</tr>
		<tr>
			<td>FocalCheck fluorescence, microscope test slide #1</td>
			<td>Thermo Fisher Scientific</td>
			<td>F36909</td>
			<td></td>
		</tr>
		<tr>
			<td>SYTOX Orange</td>
			<td>Thermo Fisher Scientific</td>
			<td>S11368</td>
			<td></td>
		</tr>
		<tr>
			<td>Qdot705 Streptavidin Conjugate</td>
			<td>Thermo Fisher Scientific</td>
			<td>Q10163MP</td>
			<td>Store at 4 &#186;C, do not freeze.</td>
		</tr>
		<tr>
			<td>ATP</td>
			<td>Amresco</td>
			<td>0220-25G</td>
			<td>Prepare 200 mM ATP solution, using ddH2O, adjust pH to 7.0, and store 10 &#956;L aliquots at -20 &#186;C.</td>
		</tr>
		<tr>
			<td>DTT</td>
			<td>Amresco</td>
			<td>M109-5G</td>
			<td>Prepare 1 M solution using ddH2O, and store 10 &#956;l aliquots at -20 &#186;C.</td>
		</tr>
	</tbody>
</table>

visualizing the interaction between the qdot-labeled protein and site-specifically modified &#955; dna at the single molecule level

The fluorescence microscopy&#160;has made great contributions in dissecting the mechanisms of complex biological processes at the single molecule level. In single molecule assays for studying DNA-protein interactions, there are two important factors for consideration: the DNA substrate with enough length for easy observation and labeling a protein with a suitable fluorescent probe. 48.5 kb &#955; DNA is a good candidate for the DNA substrate. Quantum dots (Qdots), as a class of fluorescent probes, allow long-time observation (minutes to hours) and high-quality image acquisition. In this paper, we present a protocol to study DNA-protein interactions at the single-molecule level, which includes preparing a site-specifically modified &#955; DNA and labeling a target protein with streptavidin-coated Qdots. For a proof of concept, we choose ORC (origin recognition complex) in budding yeast as a protein of interest and visualize its interaction with an ARS (autonomously replicating sequence) using TIRFM. Compared with other fluorescent probes, Qdots have obvious advantages in single molecule studies due to its high stability against photobleaching, but it should be noted that this property limits its application in quantitative assays.

To visualize the interaction between Qdot-labeled ORC and the ARS, we first constructed the &#955;-ARS317 DNA substrate. A DNA fragment containing ARS317 was integrated into XhoI site (33.5 kb) of native &#955; DNA by homologous recombination (Figure 1A). The recombination product was packaged using extracts and the packaged phage particles were cultured on LB plates (Figure 1B). The positive phage plaque was screened by...

Watch this Scientific Journal Video about Visualizing the Interaction Between the Qdot-labeled Protein and Site-specifically Modified Î» DNA at the Single Molecule Level at JoVE.com

Visualizing the Interaction Between the Qdot-labeled Protein and Site-specifically Modified &amp;#955; DNA at the Single Molecule Level

Here, we present a protocol to study DNA-protein interactions by total internal reflection fluorescence microscopy (TIRFM) using a site-specifically modified &#955; DNA substrate and a Quantum-dot labeled protein.

Visualizing the Interaction Between the Qdot-labeled Protein and Site-specifically Modified &#955; DNA at the Single Molecule Level

The fluorescence microscopy&#160;has made great contributions in dissecting the mechanisms of complex biological processes at the single molecule level. ...

This method can help answer the key questions in the field of single molecule imaging of DNA protein interactions such as DNA replication, gene repair and the maintenance of chromosome structure. The main advantage of this technique is that one can obtain modified lambda DNA high collagen and then rapidly cure the labeled proteins. Visual demonstration of this method is critical because the flow cell assembly steps are difficult to learn.To clean the coverslips, place 20 coverslips into four staining jars, pour ethanol into them and sonicate for 30 minutes in ethanol. Then rinse the coverslips with ultrapure water three times. Next, sonicate the coverslips with one molar potassium hydroxide for 30 minutes and rinse the coverslips with ultrapure water three times.Then repeat the ethanol and potassium hydroxide sonication once. Sonicate the coverslips with acetone for 30 minutes and then thoroughly rinse with ultrapure water. Now place the coverslips into Piranha solution and incubate at 95 degrees Celsius for one hour.Following incubation, rinse the coverslips with ultrapure water five times. Then wash each coverslip extensively with ultrapure water. Use paper to dry the coverslip from its edge and place the coverslip into a staining jar.Thoroughly dry the coverslip in a 110 degree Celsius oven. Now rinse the coverslip with methanol and then place the staining jar back into the 110 degree Celsius oven to dry the coverslip. To perform coverslip functionalization, add 70 milliliters of Silane solution into each jar, screw the cap and leave the jar at room temperature overnight.Wash the coverslips using three beakers filled with ultrapure water. Dry the coverslips thoroughly using nitrogen gas. Dissolve 150 milligrams of methoxy-PEG and six milligrams of biotin-PEG into one milliliter of freshly prepared 0.1 molar sodium bicarbonate.Centrifuge at 17, 000 times g for one minute to remove insoluble PEGs. Now pipette 100 microliters of PEG solution on the center of the silanized coverslip and place another silanized coverslip on the top. Incubate the coverslips with PEG solution for at least three hours in the dark.Separate the coverslip pairs and keep the functionalized surface face up. Extensively rinse the coverslips using ultrapure water and dry them with nitrogen gas. Now mark the functionalized side of the coverslips on one of the corners using a marker pen.Place one coverslip into a 50 milliliter tube drilled with one hole on its cap. Place the tube into a plastic bag, seal the bag using a vacuum sealer and store it at minus 20 degrees Celsius. To assemble the flow cell, cut a channel at the center of a piece of double-sided tape using a puncher.Peel off the paper side of the double-sided tape and paste it on a glass side with two holes. It is easier to remove air bubbles by peeling off the paper side than the plastic side of the double-sided tape. Press the tape to remove air bubbles.Then cut a functionalized coverslip into four pieces using a diamond-tipped glass scribe and remove the debris using nitrogen gas keeping the functionalized side up. Peel off the plastic side of the double-sided tape and paste the slide on the functionalized coverslip. Press gently to remove air bubbles between the coverslip and the tape.Removing air bubbles thoroughly can protect the flow cell from leaking while buffers are pumped into it. Now insert the inlet tubing into the small hole and insert the outlet tubing into the big hole. Fix the tubing using epoxy.Manually pump 20 microliters of 0.2 milligrams per milliliter Streptavidin into the flow cell using a syringe and incubate at room temperature for 10 minutes. Then pump blocking buffer into the flow cell to replace Streptavidin and keep it at room temperature. Obtain the focal alignment of red and far red with A5 on the fluorescence microscope test slide number one by simultaneous excitation using a 532 nanometer laser and a 640 nanometer laser.Produce dual wavelength images with splitting optics. Place the flow cell on the microscope and connect its outlet tubing to a longer tubing that is connected to a 10 milliliter spring installed on an automated infusion withdrawal programmable pump. Remove air bubbles in the flow cell by injecting blocking buffer and flipping the outlet tubing.Add 0.5 microliters of biotinylated lambda-ARS317 DNA into 80 microliters of blocking buffer. Pump the prepared mixture into the flow cell at 25 microliters per minute for two minutes. Then flush the lambda-ARS317 DNA using 200 microliters of blocking buffer at a rate of 50 microliters per minute.Now pump 200 microliters of binding buffer at a rate of 50 microliters per minute to remove the blocking buffer in the flow cell. Next, add two microliters of ORC-Qdot705, one microliter of DTT, and one microliter of ATP into 96 microliters of binding buffer. The final concentration of ORC-Qdot705 is 0.2 nanomolar.After pumping the binding buffer as detailed in the text protocol, pump 20 microliters of the prepared ORC-Qdot705 solution at a rate of 10 microliters per minute into the flow cell. Flush out excessive ORC-Qdot705 using 200 microliters of binding buffer at a rate of 100 microliters per minute. Then pump binding buffer with 30 nanomolar SYTOX Orange into the flow cell to stain DNA substrates at a rate of 100 microliters per minute.Finally, excite the ORC-Qdot705 signal using a 405 nanometer laser and excite the SYTOX Orange stained DNA signal using a 532 nanometer laser. Observe the signals simultaneously with 100 microliters per minute flow using a quad band bandpass filter. Record the images by EMCCD with 100 milliseconds per frame.The illustration of lambda-ARS317 DNA substrate is shown here. Qdot705-labeled ORC was excited by a 405 nanometer laser. SYTOX Orange stained DNA was excited by a 532 nanometer laser.The merged result suggests that Qdot705-labeled ORC binds at ARS317. The result of ORC-binding distribution on lambda-ARS317 DNA shows that ORC binds at ARS317 with a high abundance. Following this procedure, other methods like single-molecule FRET can be performed in order to answer additional questions regarding protein-protein interactions and protein dynamics.After its development, this technique paved the way for researchers in the field of single-molecule fluorescent imaging to explore DNA protein interactions in reconstituted systems of DNA replication and DNA repair in vitro. Don't forget that working with Piranha solution can be extremely hazardous and the precautions such as wearing of protective face masks should always be taken while performing this procedure.

visualizing-interaction-between-qdot-labeled-protein-site

Research

JoVE Journal

Biology

7.5K ビュー.  Chinese Academy of Sciences. This method can help answer the key questions in the field of single molecule imaging of DNA protein interactions such as DNA replication, gene repair and the maintenance of chromosome structure. The main advantage of this technique is that one can obtain modified lambda DNA high collagen and then rapidly cure the labeled proteins. Visual demonstration of this method is critical because the flow cell assembly steps are difficult to learn.To clean the coverslips, place 20 coverslips int...

ビデオ: Visualizing the Interaction Between the Qdot-labeled Protein and Site-specifically Modified &#955; DNA at the Single Molecule Level

Here, we present a protocol to study DNA-protein interactions by total internal reflection fluorescence microscopy (TIRFM) using a site-specifically modified &#955; DNA substrate and a Quantum-dot labeled...

method for identifying small molecule inhibitors of the protein-protein interaction between hcn1 and trip8b

Method for Identifying Small Molecule Inhibitors of the Protein-protein Interaction Between HCN1 and TRIP8b

The interaction between HCN channels and their auxiliary subunit has been identified as a therapeutic target in Major Depressive Disorder. Here, a fluorescence polarization-based method for identifying small molecule inhibitors of this protein-protein interaction, is...

molecular docking to investigate the interaction between xanthatin and keap1 protein

Molecular Docking to Investigate the Interaction Between Xanthatin and Keap1 Protein

verification of the interaction between xanthatin and keap1 protein using western blotting

Verification of the Interaction Between Xanthatin and Keap1 Protein Using Western Blotting

protein target prediction and validation of small molecule compound

Author Spotlight: Streamlining Protein Target Prediction and Validation via Molecular Docking and CETSA

The experiment used here shows a method of molecular docking combined with cellular thermal shift assay to predict and validate the interaction between small molecules and protein...

Validating Xanthatin-Keap1 Interaction with Docking and CETSA

https://cloudfront.jove.com/CDNSource/teasers/66564_b.jpg

exploring biomolecular interaction between the molecular chaperone hsp90 and its client protein kinase cdc37 using field-effect biosensing technology

Exploring Biomolecular Interaction Between the Molecular Chaperone Hsp90 and Its Client Protein Kinase Cdc37 using Field-Effect Biosensing Technology

Field-effect biosensing (FEB) is a label-free technique for detecting biomolecular interactions. It measures the electric current through the graphene biosensor to which the binding targets are immobilized. The FEB technology was used to evaluate biomolecular interactions between Hsp90 and Cdc37 and a strong interaction between the two proteins was...

protein membrane overlay assay: a protocol to test interaction between soluble and insoluble proteins in vitro

Protein Membrane Overlay Assay: A Protocol to Test Interaction Between Soluble and Insoluble Proteins in vitro

Testing protein-protein interaction is indispensable for dissection of protein functionality. Here, we introduce an in vitro protein-protein binding assay to probe a membrane-immobilized protein with a soluble protein.  This assay provides a reliable method to test interaction between an insoluble protein and a protein in...

Protein Membrane Overlay Assay: A Protocol to Test Interaction Between Soluble and Insoluble Proteins in vitro

an in vitro assay to study the interaction between neutrophils and biofilm

This video demonstrates an in vitro assay to study neutrophil-biofilm interaction. The pathogenic bacteria embedded in the biofilm and isolated neutrophils were tagged using fluorescent labels, and the immune response by the neutrophils and the evasion of the immune response by the bacteria were assessed using a fluorescence...

An In Vitro Assay to Study the Interaction between Neutrophils and Biofilm

visualizing and quantifying endonuclease-based site-specific dna damage

Visualizing and Quantifying Endonuclease-Based Site-Specific DNA Damage

This article introduces essential steps of immunostaining and chromatin immunoprecipitation. These protocols are commonly used to study DNA damage-related cellular processes and to visualize and quantify the recruitment of proteins implicated in DNA repair.

synthesis and bioconjugation of thiol-reactive reagents for the creation of site-selectively modified immunoconjugates

Synthesis and Bioconjugation of Thiol-Reactive Reagents for the Creation of Site-Selectively Modified Immunoconjugates

In this protocol, we will describe the synthesis of PODS, a phenyoxadiazolyl methyl sulfone-based reagent for the site-selective attachment of cargos to the thiols of biomolecules, particularly antibodies. In addition, we will describe the synthesis and characterization of a PODS-bearing bifunctional chelator and its conjugation to a model...

a modified yeast-one hybrid system for heteromeric protein complex-dna interaction studies

A Modified Yeast-one Hybrid System for Heteromeric Protein Complex-DNA Interaction Studies

The modified yeast one-hybrid assay described here is an extension of the classical yeast one-hybrid (Y1H) assay to study and validate the heteromeric protein complex-DNA interaction in a heterologous system for any functional genomics...

To wash excess BCD, centrifuge neutrophils at 270 RCF for five minutes, and aspirate the supernatant. Resuspend the neutrophils in fresh HBSS. Then, add ethidium homodimer-1 to the BCD-stained neutrophils at a final concentration of 4 micromolar to monitor neutrophil and bacterial...

Method for Measurement of Viral Fusion Kinetics at the Single Particle Level

Membrane fusion is an essential step during entry of enveloped viruses into cells. Conventional fusion assays typically report on a large number of fusion events, making it difficult to quantitatively analyze the sequence of the molecular steps involved. We have developed an in vitro, two-color fluorescence assay to monitor kinetics of single virus particles fusing with a target bilayer on an essentially fluid support.
Influenza viral particles are incubated with a green lipophilic fluorophore to stain the membrane and a red hydrophilic fluorophore to stain the viral interior. We deposit a ganglioside-containing lipid bilayer on the dextran-functionilized glass surface of a flow cell, incubate the viral particles on the planar bilayer and image the fluorescence of a 100 x 100 &mu;m2 area, containing several hundreds of particles, on a CCD camera. By imaging both the red and green fluorescence, we can simultaneously monitor the behavior of the membrane dye (green) and the aqueous content (red) of the particles.
Upon lowering the pH to a value below the fusion pH, the particles will fuse with the membrane. Hemifusion, the merging of the outer leaflet of the viral membrane with the outer leaflet of the target membrane, will be visible as a sudden change in the green fluorescence of a particle. Upon the subsequent fusion of the two remaining distal leaflets a pore will be formed and the red-emitting fluorophore in the viral particle will be released under the target membrane. This event will give rise to a decrease of the red fluorescence of individual particles. Finally, the integrated fluorescence from a pH-sensitive fluorophore that is embedded in the target membrane reports on the exact time of the pH drop.
From the three fluorescence-time traces, all the important events (pH drop, lipid mixing upon hemifusion, content mixing upon pore formation) can now be extracted in a straightforward manner and for every particle individually. By collecting the elapsed times for the various transitions for many individual particles in histograms, we can determine the lifetimes of the corresponding intermediates. Even hidden intermediates that do not have a direct fluorescent observable can be visualized directly from these histograms.

We present an in vitro, two-color fluorescence assay to visualize the fusion of single virus particles with a fluid target bilayer. By labeling viral particles with fluorophores that differentially stain the viral membrane and its interior, we are able to monitor the kinetics of hemifusion and pore formation.

Membrane fusion is an essential step during entry of enveloped viruses into cells. Conventional fusion assays typically report on a large number of fusion ...

Visualizing Single-molecule DNA Replication with Fluorescence Microscopy

We describe a simple fluorescence microscopy-based real-time method for observing DNA replication at the single-molecule level. A circular, forked DNA template is attached to a functionalized glass coverslip and replicated extensively after introduction of replication proteins and nucleotides (Figure 1). The growing product double-strand DNA (dsDNA) is extended with laminar flow and visualized by using an intercalating dye. Measuring the position of the growing DNA end in real time allows precise determination of replication rate (Figure 2). Furthermore, the length of completed DNA products reports on the processivity of replication. This experiment can be performed very easily and rapidly and requires only a fluorescence microscope with a reasonably sensitive camera.


This protocol demonstrates a simple single-molecule fluorescence microscopy technique for visualizing DNA replication by individual replisomes in real time.

We describe a simple fluorescence microscopy-based real-time method for observing DNA replication at the single-molecule level. A circular, forked DNA ...

Studying Proteolysis of Cyclin B at the Single Cell Level in Whole Cell Populations

Equal distribution of chromosomes between the two daughter cells during cell division is a prerequisite for guaranteeing genetic stability 1. Inaccuracies during chromosome separation are a hallmark of malignancy and associated with progressive disease 2-4. The spindle assembly checkpoint (SAC) is a mitotic surveillance mechanism that holds back cells at metaphase until every single chromosome has established a stable bipolar attachment to the mitotic spindle1. The SAC exerts its function by interference with the activating APC/C subunit Cdc20 to block proteolysis of securin and cyclin B and thus chromosome separation and mitotic exit. Improper attachment of chromosomes prevents silencing of SAC signaling and causes continued inhibition of APC/CCdc20 until the problem is solved to avoid chromosome missegregation, aneuploidy and malignant growths1.
Most studies that addressed the influence of improper chromosomal attachment on APC/C-dependent proteolysis took advantage of spindle disruption using depolymerizing or microtubule-stabilizing drugs to interfere with chromosomal attachment to microtubules. Since interference with microtubule kinetics can affect the transport and localization of critical regulators, these procedures bear a risk of inducing artificial effects 5.
To study how the SAC interferes with APC/C-dependent proteolysis of cyclin B during mitosis in unperturbed cell populations, we established a histone H2-GFP-based system which allowed the simultaneous monitoring of metaphase alignment of mitotic chromosomes and proteolysis of cyclin B 6.
To depict proteolytic profiles, we generated a chimeric cyclin B reporter molecule with a C-terminal SNAP moiety 6 (Figure 1). In a self-labeling reaction, the SNAP-moiety is able to form covalent bonds with alkylguanine-carriers (SNAP substrate) 7,8 (Figure 1). SNAP substrate molecules are readily available and carry a broad spectrum of different fluorochromes. Chimeric cyclin B-SNAP molecules become labeled upon addition of the membrane-permeable SNAP substrate to the growth medium 7 (Figure 1). Following the labeling reaction, the cyclin B-SNAP fluorescence intensity drops in a pulse-chase reaction-like manner and fluorescence intensities reflect levels of cyclin B degradation 6 (Figure 1). Our system facilitates the monitoring of mitotic APC/C-dependent proteolysis in large numbers of cells (or several cell populations) in parallel. Thereby, the system may be a valuable tool to identify agents/small molecules that are able to interfere with proteolytic activity at the metaphase to anaphase transition. Moreover, as synthesis of cyclin B during mitosis has recently been suggested as an important mechanism in fostering a mitotic block in mice and humans by keeping cyclin B expression levels stable 9,10, this system enabled us to analyze cyclin B proteolysis as one element of a balanced equilibrium 6.

Metaphase to anaphase transition is triggered through anaphase-promoting complex (APC/C)-dependent ubiquitination and subsequent destruction of cyclin B. Here, we established a system which, following pulse-chase labeling, allows monitoring cyclin B proteolysis in entire cell populations and facilitates the detection of interference by the mitotic checkpoint.

Equal distribution of chromosomes between the two daughter cells during cell division is a prerequisite for guaranteeing genetic stability 1. Inaccuracies ...

Analysis of Global RNA Synthesis at the Single Cell Level following Hypoxia

Hypoxia or lowering of the oxygen availability is involved in many physiological and pathological processes. At the molecular level, cells initiate a particular transcriptional program in order to mount an appropriate and coordinated cellular response. The cell possesses several oxygen sensor enzymes that require molecular oxygen as cofactor for their activity. These range from prolyl-hydroxylases to histone demethylases. The majority of studies analyzing cellular responses to hypoxia are based on cellular populations and average studies, and as such single cell analysis of hypoxic cells are seldom performed. Here we describe a method of analysis of global RNA synthesis at the single cell level in hypoxia by using Click-iT RNA imaging kits in an oxygen controlled workstation, followed by microscopy analysis and quantification.&nbsp; Using cancer cells exposed to hypoxia for different lengths of time, RNA is labeled and measured in each cell. This analysis allows the visualization of temporal and cell-to-cell changes in global RNA synthesis following hypoxic stress.

We describe a technique for analysis of global RNA synthesis in hypoxia using imaging. Click-chemistry labeling of RNA has not previously been performed under hypoxia and allows visualization of global RNA changes at the single cell level. This approach complements the existing averaged RNA techniques, allowing direct visualization of cell-to-cell changes in global RNA synthesis.

Hypoxia or lowering of the oxygen availability is involved in many physiological and pathological processes. At the molecular level, cells initiate a ...

Combining Single-molecule Manipulation and Imaging for the Study of Protein-DNA Interactions

The paper describes the combination of optical tweezers and single molecule fluorescence detection for the study of protein-DNA interaction. The method offers the opportunity of investigating interactions occurring in solution (thus avoiding problems due to closeby surfaces as in other single molecule methods), controlling the DNA extension and tracking interaction dynamics as a function of both mechanical parameters and DNA sequence. The methods for establishing successful optical trapping and nanometer localization of single molecules are illustrated. We illustrate the experimental conditions allowing the study of interaction of lactose repressor (lacI), labeled with Atto532, with a DNA molecule containing specific target sequences (operators) for LacI binding. The method allows the observation of specific interactions at the operators, as well as one-dimensional diffusion of the protein during the process of target search. The method is broadly applicable to the study of protein-DNA interactions but also to molecular motors, where control of the tension applied to the partner track polymer (for example actin or microtubules) is desirable.

Here we describe the instrumentation and methods for detecting single fluorescently-labeled protein molecules interacting with a single DNA molecule suspended between two optically trapped microspheres.

The paper describes the combination of optical tweezers and single molecule fluorescence detection for the study of protein-DNA interaction. The method ...

Identifying Protein-protein Interaction Sites Using Peptide Arrays

Protein-protein interactions mediate most of the processes in the living cell and control homeostasis of the organism. Impaired protein interactions may result in disease, making protein interactions important drug targets. It is thus highly important to understand these interactions at the molecular level. Protein interactions are studied using a variety of techniques ranging from cellular and biochemical assays to quantitative biophysical assays, and these may be performed either with full-length proteins, with protein domains or with peptides. Peptides serve as excellent tools to study protein interactions since peptides can be easily synthesized and allow the focusing on specific interaction sites. Peptide arrays enable the identification of the interaction sites between two proteins as well as screening for peptides that bind the target protein for therapeutic purposes. They also allow high throughput SAR studies. For identification of binding sites, a typical peptide array usually contains partly overlapping 10-20 residues peptides derived from the full sequences of one or more partner proteins of the desired target protein. Screening the array for binding the target protein reveals the binding peptides, corresponding to the binding sites in the partner proteins, in an easy and fast method using only small amount of protein.
In this article we describe a protocol for screening peptide arrays for mapping the interaction sites between a target protein and its partners. The peptide array is designed based on the sequences of the partner proteins taking into account their secondary structures. The arrays used in this protocol were Celluspots arrays prepared by INTAVIS Bioanalytical Instruments. The array is blocked to prevent unspecific binding and then incubated with the studied protein. Detection using an antibody reveals the binding peptides corresponding to the specific interaction sites between the proteins.

Peptide array screening is a high throughput assay for identifying protein-protein interaction sites. This allows mapping multiple interactions of a target protein and can serve as a method for identifying sites for inhibitors that target a protein. Here we describe a protocol for screening and analyzing peptide arrays.

Protein-protein interactions mediate most of the processes in the living cell and control homeostasis of the organism. Impaired protein interactions may ...

Analysis of LINE-1 Retrotransposition at the Single Nucleus Level

Long interspersed nuclear element-1 (Line-1 or L1) accounts for approximately 17% of the DNA present in the human genome. While the majority of L1s are inactive due to 5' truncations, ~80-100 of these elements remain retrotransposition competent and propagate to different locations throughout the genome via RNA intermediates. While older L1s are believed to target AT rich regions of the genome, the chromosomal targets of newer, more active L1s remain poorly defined. Here we describe fluorescence in situ hybridization (FISH) methodology that can be used to track patterns of L1 insertion and rates of ectopic L1 incorporation at the single nucleus level. In these experiments, fluorescein isothiocyanate/cyanine-3 (FITC/CY3) labeled neomycin probes were employed to track L1 retrotransposition in vitro in HepG2 cells stably expressing ectopic L1. This methodology prevents errors in the estimation of rates of retrotransposition posed by toxicity and account for the occurrence of multiple insertions into a single nucleus.

Here we employ FISH methodology to track LINE-1 retrotransposition at the single nuclei level in chromosome spreads of HepG2 cell lines stably expressing synthetic LINE-1.

Long interspersed nuclear element-1 (Line-1 or L1) accounts for approximately 17% of the DNA present in the human genome. While the majority of L1s are ...

CUBIC Protocol Visualizes Protein Expression at Single Cell Resolution in Whole Mount Skin Preparations

The skin is essential for our survival. The outer epidermal layer consists of the interfollicular epidermis, which is a stratified squamous epithelium covering most of our body, and epidermal appendages such as the hair follicles and sweat glands. The epidermis undergoes regeneration throughout life and in response to injury. This is enabled by K14-expressing basal epidermal stem/progenitor cell populations that are tightly regulated by multiple regulatory mechanisms active within the epidermis and between epidermis and dermis. This article describes a simple method to clarify full thickness mouse skin biopsies, and visualize K14 protein expression patterns, Ki67 labeled proliferating cells, Nile Red labeled sebocytes, and DAPI nuclear labeling at single cell resolution in 3D. This method enables accurate assessment and quantification of skin anatomy and pathology, and of abnormal epidermal phenotypes in genetically modified mouse lines. The CUBIC protocol is the best method available to date to investigate molecular and cellular interactions in full thickness skin biopsies at single cell resolution.

This report describes a CUBIC protocol to clarify full thickness mouse skin biopsies, and visualize protein expression patterns, proliferating cells, and sebocytes at the single cell resolution in 3D. This method enables accurate assessment of skin anatomy and pathology, and of abnormal epidermal phenotypes in genetically modified mouse lines.

The skin is essential for our survival. The outer epidermal layer consists of the interfollicular epidermis, which is a stratified squamous epithelium ...

Advanced Confocal Microscopy Techniques to Study Protein-protein Interactions and Kinetics at DNA Lesions

Local microirradiation with lasers represents a useful tool for studies of DNA-repair-related processes in live cells. Here, we describe a methodological approach to analyzing protein kinetics at DNA lesions over time or protein-protein interactions on locally microirradiated chromatin. We also show how to recognize individual phases of the cell cycle using the Fucci cellular system to study cell-cycle-dependent protein kinetics at DNA lesions. A methodological description of the use of two UV lasers (355 nm and 405 nm) to induce different types of DNA damage is also presented. Only the cells microirradiated by the 405-nm diode laser proceeded through mitosis normally and were devoid of cyclobutane pyrimidine dimers (CPDs). We also show how microirradiated cells can be fixed at a given time point to perform immunodetection of the endogenous proteins of interest. For the DNA repair studies, we additionally describe the use of biophysical methods including FRAP (Fluorescence Recovery After Photobleaching) and FLIM (Fluorescence Lifetime Imaging Microscopy) in cells with spontaneously occurring DNA damage foci. We also show an application of FLIM-FRET (Fluorescence Resonance Energy Transfer) in experimental studies of protein-protein interactions.

Laser microirradiation is a useful tool for studies of DNA repair in living cells. A methodological approach for the use of UVA lasers to induce various DNA lesions is shown. We have optimized a method for local microirradiation that maintains the normal cell cycle; thus, irradiated cells proceed through mitosis.

Local microirradiation with lasers represents a useful tool for studies of DNA-repair-related processes in live cells. Here, we describe a methodological ...

Probing mRNA Kinetics in Space and Time in Escherichia coli using Two-Color Single-Molecule Fluorescence In Situ Hybridization

Single-molecule fluorescence in situ hybridization (smFISH) allows for counting the absolute number of mRNAs in individual cells. Here, we describe an application of smFISH to measure the rates of transcription and mRNA degradation in Escherichia coli. As smFISH is based on fixed cells, we perform smFISH at multiple time points during a time-course experiment, i.e., when cells are undergoing synchronized changes upon induction or repression of gene expression. At each time point, sub-regions of an mRNA are spectrally distinguished to probe transcription elongation and premature termination. The outcome of this protocol also allows for analyzing intracellular localization of mRNAs and heterogeneity in mRNA copy numbers among cells. Using this protocol many samples (~50) can be processed within 8 h, like the amount of time needed for just a few samples. We discuss how to apply this protocol to study the transcription and degradation kinetics of different mRNAs in bacterial cells.

Probing mRNA Kinetics in Space and Time in Escherichia coli using Two-Color Single-Molecule Fluorescence In Situ Hybridization

This protocol describes an application of single-molecule fluorescence in situ hybridization (smFISH) to measure the in vivo kinetics of mRNA synthesis and degradation.

Single-molecule fluorescence in situ hybridization (smFISH) allows for counting the absolute number of mRNAs in individual cells. Here, we describe an ...