valorization-red-seaweed-gracilaria-gracilis-through-biorefinery

Valorization of the Red Seaweed <em>Gracilaria gracilis</em> Through a Biorefinery Approach

The interest in seaweeds as an abundant feedstock to obtain valuable and multitarget bioactive ingredients is continuously growing. In this work, we ...

Polytechnic of Leiria

Polytechnic University of Leiria

The extraction of phycobiliprotein (PBP) pigments from red algae Gracilaria gracilis was optimized using maceration, ultrasound-assisted extraction (ultrasonic water bath and ultrasonic probe), high pressure-assisted extraction, and freeze-thaw. The experimental conditions, namely homogenization time (t1), buffer concentration (C), treatment time (t2), biomass: buffer ratio (R), and pressure (P), were optimized using Response Surface Methodology (RSM). The yield of phycoerythrin (PE) extracted, determined spectroscopically, was used as the response variable. Maceration was the most efficient extraction method yielding 3.6 mg PE/g biomass under the optimal conditions (t1 = t2 = 10 min; C = 0.1 M; R = 1:50). Scanning Electron Microscopy (SEM) analysis of the biomass before and after the cell disruption treatments revealed a more efficient cell wall rupture with maceration.

Optimization of phycobiliprotein pigments extraction from red algae Gracilaria gracilis for substitution of synthetic food colorants.

Phycobiliprotein (PBP) pigments were extracted from red algae Gracilaria gracilis through maceration in phosphate buffer using previously optimized conditions. The stability of PBPs in the extracts was assessed by monitoring the extracts at different pHs and temperatures for 10 days. Since phycoerythrin (PE) is the main PBP present in G. gracilis, PE content was spectroscopically determined and used as a response factor. Kinetic modeling was used to describe PE degradation under different ranges of T and pH. The pigment extracts presented higher stability at pH 6.9 and -20 °C. PE was semipurified by precipitation with ammonium sulphate 65% followed by dialysis against water until a purity index of 0.7. The pigment was successfully applied as colorant in pancakes and yogurts with a pigment concentration of 0.15%. This study highlights the potential of PE pigments extracted from G. gracilis for applications in food products. PRACTICAL APPLICATION: Phycobiliprotein pigments were extracted from red algae Gracilaria gracilis through maceration in phosphate buffer. The stability of the pigment was evaluated at different pHs and temperatures, presenting higher stability at neutral pH and low temperatures. The pigment was successfully applied as colorant in pancakes and yogurts with a low pigment concentration. This study highlights the potential of phycobiliprotein pigments extracted from G. gracilis for applications in food products.

Stability, kinetics, and application study of phycobiliprotein pigments extracted from red algae Gracilaria gracilis.

An important factor in consumers' acceptability, beyond visual appearance and taste, is food texture. The elderly and people with dysphagia are more likely to present malnourishment due to visually and texturally unappealing food. Three-dimensional Printing is an additive manufacturing technology that can aid the food industry in developing novel and more complex food products and has the potential to produce tailored foods for specific needs. As a technology that builds food products layer by layer, 3D Printing can present a new methodology to design realistic food textures by the precise placement of texturing elements in the food, printing of multi-material products, and design of complex internal structures. This paper intends to review the existing work on 3D food printing and discuss the recent developments concerning food texture design. Advantages and limitations of 3D Printing in the food industry, the material-based printability and model-based texture, and the future trends in 3D Printing, including numerical simulations, incorporation of cooking technology to the printing, and 4D modifications are discussed. Key challenges for the mainstream adoption of 3D Printing are also elaborated on.

Food Texture Design by 3D Printing: A Review.

Due to the high consumption of fat-rich processed foods, efforts are being done to reduce their saturated fat (SFA) contents and replace it with polyunsaturated fatty acids (PUFA), creating a necessity to find alternative PUFA sources. Macroalgae, being a promising natural source of healthy food, may be such an alternative. The fatty acid (FA) profile of , , , and  were determined through direct transesterification and their seasonal variation was studied.  showed the highest FA content overall,  presented the higher PUFA amounts, and  and  the higher SFA. The production of FA was shown to be influenced by the seasons. Spring and summer seemed to induce the FA production in  and  while in  the same was verified in winter.  presented a ω6/ω3 ratio between 0.59 and 1.38 while  presented a ratio around 1.31. The study on the seasonal variations of the macroalgal FA profile can be helpful to understand the best season to yield FA of interest, such as ALA, EPA, and DHA. It may also provide valuable information on the best culturing conditions for the production of desired FAs.

Tatiana Pereira

MARE-Marine and Environmental Sciences Centre/ARNET-Aquatic Research Network,
ESTM

Polytechnic of Leiria

Valorization of the Red Seaweed Gracilaria gracilis Through a Biorefinery Approach

Tatiana Pereira

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}MARE-Marine and Environmental Sciences Centre/ARNET-Aquatic Research Network,ESTM

Polytechnic of Leiria

Valorization of the Red Seaweed Gracilaria gracilis Through a Biorefinery Approach

MARE-Marine and Environmental Sciences Centre/ARNET-Aquatic Research Network,
ESTM