<ol><li> 안티 CD4 + biotinlayted 표면 microfluidic 채널을 준비합니다. </li><li> 주사기 펌프와 microfluidic 채널에 5 ML / 분 샘플 혈액의 10 ML을 주사. </li><li> PBS로 20 분 20 ML / 분 혈액을 밖으로 플러시. </li><li> 15 분 5ul/min에 희석 외과 lysing 솔루션 (PBS로 재고 솔루션에서 10 % 희석) 주사. </li><li> 15 분 알을 품다. </li><li> 5 ML / 20 분 분 주요 인 경우에는 3 번 CD + 항체 솔루션 (PBS로 재고 솔루션에서 10 % 희석) 주사. </li><li> 2 시간 동안 부화. </li><li> 5 ML / 15 분 분 PBS와 채널을 플러시. </li><li> 동시에 20 분 5 ML / 분 20 % AF488 CD4 + 항체, 0.2 % DAPI 주식 솔루션,와 10 %의 보조 인 경우에는 3 번 CD + 항체를 주사. </li><li> 20 분 품어. </li><li> 5 ML / 15 분 분 PBS와 채널을 플러시. </li><li> 형광 현미경으로 세포를 개수 : <ol><li> 화이트 (광학) - 흑백 : 셀 및 먼지 </li><li> UV (DAPI) - 블루 : 세포에만 </li><li> 블루 (CD4 +) - 초록색 : T - 림프구와 단핵구 </li><li> 그린 (인 경우에는 3 번 CD +) - 빨간색 : T - 림프구 전용 </li></ol></li></ol>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>PDMS microchannel</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>Fabricated by SU-8 mold</td>
</tr>
<tr>
<td>Blood</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>Donated blood from normal human subject. Mass General Hospital, 10 X high density WBC or Brigham and Women&#x2019;s Hospital.</td>
</tr>
<tr>
<td>PBS</td>
<td>Buffer</td>
<td>Invitrogen</td>
<td>14190</td>
<td>1x Dulbecco&#x2019;s Phosphated Buffered Saline.</td>
</tr>
<tr>
<td>FACS lysing solution</td>
<td>&nbsp;</td>
<td>Becton Dickinson</td>
<td>349202</td>
<td>Diluted to 10% from stock solution with PBS.</td>
</tr>
<tr>
<td>Anti-CD4+ biotinlayted Ab</td>
<td>&nbsp;</td>
<td>Beckman Coulter</td>
<td>IM0704</td>
<td>Surface prepared with Anti-CD4+ biotinlayted Ab, diluted to 10% from stock solution with PBS/BSA after mixing with 0.2mg stock and 1ml deionized water. </td>
</tr>
<tr>
<td>goat anti-hCD3delta</td>
<td>pAB</td>
<td>Santa Cruz Biotechnology</td>
<td>sc-1128</td>
<td>Diluted to 10% from stock solution with PBS</td>
</tr>
<tr>
<td>rabbit anti-goat IgG PE</td>
<td>&nbsp;</td>
<td>Santa Cruz Biotechnology</td>
<td>sc-3755</td>
<td>Secondary Ab fro anti-CD3 Ab, diluted to 10% from stock solution with PBS</td>
</tr>
<tr>
<td>anti-human CD4+</td>
<td>&nbsp;</td>
<td>Becton Dickinson</td>
<td>557695</td>
<td>Alexa Fluor 488 labeled, diluted to 20% from stock solution with PBS. </td>
</tr>
<tr>
<td>DAPI</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>D1306</td>
<td>4&#x2019;,6-dianidino-2-phenylindole, dihydrochloride solution, diluted to 0.2% from stock solution with PBS.</td>
</tr>		</tbody>
		</table>
		</div>

cd4+ t-lymphocyte capture using a disposable microfluidic chip for hiv

Watch this Scientific Journal Video about CD4+ T-Lymphocyte Capture Using a Disposable Microfluidic Chip for HIV at JoVE.com

CD4+ T-Lymphocyte Capture Using a Disposable Microfluidic Chip for HIV

CD4 + HIV에 대한 일회용 Microfluidic 칩을 사용하여 T - 림프구 캡처

cd4-t-lymphocyte-capture-using-a-disposable-microfluidic-chip-for-hiv

Research

JoVE Journal

Biology

7.6K 조회수.  Brigham and Women's Hospital. 

비디오: CD4+ T-Lymphocyte Capture Using a Disposable Microfluidic Chip for HIV

A Gradient-generating Microfluidic Device for Cell Biology

 The fabrication and operation of a gradient-generating microfluidic device for studying cellular behavior is described.  A microfluidic platform is an enabling experimental tool, because it can precisely manipulate fluid flows, enable high-throughput experiments, and generate stable soluble concentration gradients.  Compared to conventional gradient generators, poly(dimethylsiloxane) (PDMS)-based  microfluidic devices can generate stable concentration gradients of growth factors with well-defined profiles.  Here, we developed simple gradient-generating microfluidic devices with three separate inlets.  Three microchannels combined into one microchannel to generate concentration gradients.  The stability and shape of growth factor gradients were confirmed by fluorescein isothyiocyanate (FITC)-dextran with a molecular weight similar to epidermal growth factor (EGF).  Using this microfluidic device, we demonstrated that fibroblasts exposed to concentration gradients of EGF migrated toward higher concentrations.  The directional orientation of cell migration and motility of migrating cells were quantitatively assessed by cell tracking analysis.  Thus, this gradient-generating microfluidic device might be useful for studying and analyzing the behavior of migrating cells.

We describe a protocol for the microfabrication of the gradient-generating microfluidic device that can generate spatial and temporal gradients in well-defined microenvironment. In this approach, the gradient-generating microfluidic device can be used to study directed cell migration, embryogenesis, wound healing, and cancer metastasis.

세포 생물학을위한 그라디언트 생성 Microfluidic 장치

 The fabrication and operation of a gradient-generating microfluidic device for studying cellular behavior is described.  A microfluidic platform is an ...

연구

생물학

Laser Capture Microdissection of Mammalian Tissue

Laser capture microscopy, also known as laser microdissection (LMD), enables the user to isolate small numbers of cells or tissues from frozen or formalin-fixed, paraffin-embedded tissue sections. LMD techniques rely on a thermo labile membrane placed either on top of, or underneath, the tissue section. In one method, focused laser energy is used to melt the membrane onto the underlying cells, which can then be lifted out of the tissue section. In the other, the laser energy vaporizes the foil along a path "drawn" on the tissue, allowing the selected cells to fall into a collection device. Each technique allows the selection of cells with a minimum resolution of several microns. DNA, RNA, protein, and lipid samples may be isolated and analyzed from micro-dissected samples. In this video, we demonstrate the use of the Leica AS-LMD laser microdissection instrument in seven segments, including an introduction to the principles of LMD, initializing the instrument for use, general considerations for sample preparation, mounting the specimen and setting up capture tubes, aligning the microscope, adjusting the capture controls, and capturing tissue specimens. Laser-capture micro-dissection enables the investigator to isolate samples of pure cell populations as small as a few cell-equivalents. This allows the analysis of cells of interest that are free of neighboring contaminants, which may confound experimental results.

포유 동물 조직의 레이저 캡처 Microdissection

Laser capture microscopy, also known as laser microdissection (LMD), enables the user to isolate small numbers of cells or tissues from frozen or ...

Cell Capture Using a Microfluidic Device

Microfluidic 장치를 사용하여 셀 캡처

Microfluidic Applications for Disposable Diagnostics

In this interview, Dr. Klapperich discusses the fabrication of thermoplastic microfluidic devices and their application for development of new diagnostics.

In this interview, Dr. Klapperich discusses the fabrication of thermoplastic microfluidic devices and their application for development of new diagnostics.

일회용 진단을위한 Microfluidic 응용

In this interview, Dr. Klapperich discusses the fabrication of thermoplastic microfluidic devices and their application for development of new ...

Assessing Neural Stem Cell Motility Using an Agarose Gel-based Microfluidic Device

While microfluidic technology is reaching a new level of maturity for macromolecular assays, cell-based assays are still at an infant stage1. This is largely due to the difficulty with which one can create a cell-compatible and steady microenvironment using conventional microfabrication techniques and materials. We address this problem via the introduction of a novel microfabrication material, agarose gel, as the base material for the microfluidic device. Agarose gel is highly malleable, and permeable to gas and nutrients necessary for cell survival, and thus an ideal material for cell-based assays. We have shown previously that agarose gel based devices have been successful in studying bacterial and neutrophil cell migration2. In this report, three parallel microfluidic channels are patterned in an agarose gel membrane of about 1mm thickness. Constant flows with media/buffer are maintained in the two side channels using a peristaltic pump. Cells are maintained in the center channel for observation. Since the nutrients and chemicals in the side channels are constantly diffusing from the side to center channel, the chemical environment of the center channel is easily controlled via the flow along the side channels. Using this device, we demonstrate that the movement of neural stem cells can be monitored optically with ease under various chemical conditions, and the experimental results show that the over expression of epidermal growth factor receptors (EGFR) enhances the motility of neural stem cells. Motility of neural stem cells is an important biomarker for assessing cells aggressiveness, thus tumorigenic factor3. Deciphering the mechanism underlying NSC motility will yield insight into both disorders of neural development and into brain cancer stem cell invasion.

We demonstrate that the over expression of epidermal growth factor receptors (EGFR) enhances the motility of neural stem cells(NSCs) using a novel agarose gel based microfluidic device. This technology can be readily adaptable to other mammalian cell systems where cell sources are scarce, such as human neural stem cells, and the turn around time is critical.

아가로 오스 겔 기반 Microfluidic 장치를 사용 신경 줄기 세포의 운동성 평가

While microfluidic technology is reaching a new level of maturity for macromolecular assays, cell-based assays are still at an infant stage1. This is ...

Interview: HIV-1 Proviral DNA Excision Using an Evolved Recombinase

HIV-1 integrates into the host chromosome of infected cells and persists as a provirus flanked by long terminal repeats. Current treatment strategies primarily target virus enzymes or virus-cell fusion, suppressing the viral life cycle without eradicating the infection. Since the integrated provirus is not targeted by these approaches, new resistant strains of HIV-1 may emerge. Here, we report that the engineered recombinase Tre (see Molecular evolution of the Tre recombinase , Buchholz, F., Max Planck Institute for Cell Biology and Genetics, Dresden) efficiently excises integrated HIV-1 proviral DNA from the genome of infected cells. We produced loxLTR containing viral pseudotypes and infected HeLa cells to examine whether Tre recombinase can excise the provirus from the genome of HIV-1 infected human cells. A virus particle-releasing cell line was cloned and transfected with a plasmid expressing Tre or with a parental control vector. Recombinase activity and virus production were monitored. All assays demonstrated the efficient deletion of the provirus from infected cells without visible cytotoxic effects. These results serve as proof of principle that it is possible to evolve a recombinase to specifically target an HIV-1 LTR and that this recombinase is capable of excising the HIV-1 provirus from the genome of HIV-1-infected human cells.
Before an engineered recombinase could enter the therapeutic arena, however, significant obstacles need to be overcome. Among the most critical issues, that we face, are an efficient and safe delivery to targeted cells and the absence of side effects.

Current HIV-1 strategies act to suppress the viral life cycle but do not effectively eradicate infection. Here, we demonstrate that an engineered recombinase can efficiently excise integrated HIV-1 proviral DNA from the genome of infected cells.

인터뷰 : 진화 Recombinase을 사용하여 HIV - 1의 DNA 절단 Proviral

HIV-1 integrates into the host chromosome of infected cells and persists as a provirus flanked by long terminal repeats. Current treatment strategies ...

Visualizing Antigen Specific CD4+ T Cells using MHC Class II Tetramers

Major histocompatibility complex (MHC) class II tetramers allow the direct visualization of antigen specific CD4+ T cells by flow cytometry.  This method relies on the highly specific interaction between peptide loaded MHC and the corresponding T-cell receptor.  While the affinity of a single MHC/peptide molecule is low, cross-linking MHC/peptide complexes with streptavidin increases the avidity of the interaction, enabling their use as staining reagents.  Because of the relatively low frequencies of CD4+ T cells (~1 in 300,000 for a single specificity) this assay utilizes an in vitro amplification step to increase its threshold of detection.  Mononuclear cells are purified from peripheral blood by Ficoll underlay.  CD4+ cells are then separated by negative selection using biotinylated antibody cocktail and anti-biotin labeled magnetic beads.  Using adherent cells from the CD4- cell fraction as antigen presenting cells, CD4+ T cells are expanded in media by adding an antigenic peptide and IL-2.  The expanded cells are stained with the corresponding class II tetramer by incubating at 37 C for one hour and subsequently stained using surface antibodies such as anti-CD4, anti-CD3, and anti-CD25.  After labeling, the cells can be directly analyzed by flow cytometry.  The tetramer positive cells typically form a distinct population among the expanded CD4+ cells.  Tetramer positive cells are usually CD25+ and often CD4 high.  Because the level of background tetramer staining can vary, positive staining results should always be compared to the staining of the same cells with an irrelevant tetramer.  Multiple variations of this basic assay are possible.  Tetramer positive cells may be sorted for further phenotypic analysis, inclusion in ELISPOT or proliferation assays, or other secondary assays.  Several groups have also demonstrated co-staining using tetramers and either anti-cytokine or anti-FoxP3 antibodies.  

This procedure demonstrates the purification and in vitro expansion of antigen specific CD4+ T cells from whole peripheral blood and their visualization using MHC class II tetramers. Tetramers permit the direct visualization of T cells with a single antigen specificity and defined MHC class II restriction.

머릿속 항원 특정 CD4 + MHC 클래스 II Tetramers를 사용하여 T 세포

Major histocompatibility complex (MHC) class II tetramers allow the direct visualization of antigen specific CD4+ T cells by flow cytometry.  This method ...

The Microfluidic Probe: Operation and Use for Localized Surface Processing

Microfluidic devices allow assays to be performed using minute amounts of sample and have recently been used to control the microenvironment of cells. Microfluidics is commonly associated with closed microchannels which limit their use to samples that can be introduced, and cultured in the case of cells, within a confined volume. On the other hand, micropipetting system have been used to locally perfuse cells and surfaces, notably using push-pull setups where one pipette acts as source and the other one as sink, but the confinement of the flow is difficult in three dimensions. Furthermore, pipettes are fragile and difficult to position and hence are used in static configuration only. 
The microfluidic probe (MFP) circumvents the constraints imposed by the construction of closed microfluidic channels and instead of enclosing the sample into the microfluidic system, the microfluidic flow can be directly delivered onto the sample, and scanned across the sample, using the MFP. . The injection and aspiration openings are located within a few tens of micrometers of one another so that a microjet injected into the gap is confined by the hydrodynamic forces of the surrounding liquid and entirely aspirated back into the other opening. The microjet can be flushed across the substrate surface and provides a precise tool for localized deposition/delivery of reagents which can be used over large areas by scanning the probe across the surface. 
In this video we present the microfluidic probe1 (MFP). We explain in detail how to assemble the MFP, mount it atop an inverted microscope, and align it relative to the substrate surface, and finally show how to use it to process a substrate surface immersed in a buffer.

In this video we present the microfluidic probe1 (MFP). We explain in detail how to assemble the MFP, mount it atop an inverted microscope, and align it relative to the substrate surface, and finally show how to use it to process a substrate surface immersed in a buffer solution.

Microfluidic 프로브 : 운영 및 현지화된 표면 처리에 사용

Microfluidic devices allow assays to be performed using minute amounts of sample and have recently been used to control the microenvironment of cells. ...

Platelet Adhesion and Aggregation Under Flow using Microfluidic Flow Cells

Platelet aggregation occurs in response to vascular injury where the extracellular matrix below the endothelium has been exposed. The platelet adhesion cascade takes place in the presence of shear flow, a factor not accounted for in conventional (static) well-plate assays. This article reports on a platelet-aggregation assay utilizing a microfluidic well-plate format to emulate physiological shear flow conditions. Extracellular proteins, collagen I or von Willebrand factor are deposited within the microfluidic channel using active perfusion with a pneumatic pump. The matrix proteins are then washed with buffer and blocked to prepare the microfluidic channel for platelet interactions. Whole blood labeled with fluorescent dye is perfused through the channel at various flow rates in order to achieve platelet activation and aggregation. Inhibitors of platelet aggregation can be added prior to the flow cell experiment to generate IC50 dose response data.

The platelet adhesion cascade takes place in the presence of shear flow, a factor not accounted for in conventional (static) well-plate assays. This article reports on a platelet-aggregation assay utilizing a microfluidic well-plate format to emulate physiological shear flow conditions.

Microfluidic 흐름 전지를 사용하여 흐름에서 혈소판 접착 및 집계

Platelet aggregation occurs in response to vascular injury where the extracellular matrix below the endothelium has been exposed. The platelet adhesion ...

A Microfluidic Device for Quantifying Bacterial Chemotaxis in Stable Concentration Gradients

Chemotaxis allows bacteria to approach sources of attractant chemicals or to avoid sources of repellent chemicals. Bacteria constantly monitor the concentration of specific chemoeffectors by comparing the current concentration to the concentration detected a few seconds earlier. This comparison determines the net direction of movement. Although multiple, competing gradients often coexist in nature, conventional approaches for investigating bacterial chemotaxis are suboptimal for quantifying migration in response to concentration gradients of attractants and repellents. Here, we describe the development of a microfluidic chemotaxis model for presenting precise and stable concentration gradients of chemoeffectors to bacteria and quantitatively investigating their response to the applied gradient. The device is versatile in that concentration gradients of any desired absolute concentration and gradient strength can be easily generated by diffusive mixing. The device is demonstrated using the response of Escherichia coli RP437 to gradients of amino acids and nickel ions.

This protocol describes the development of a microfluidic device for investigating bacterial chemotaxis in stable concentration gradients of chemoeffectors.