Portions of this work were supported by the II-VI Foundation and the Coastal Carolina Professional Enhancement Grant. We would also like to acknowledge Corrine Jacobs, Marek Jendrassak and William Merchant for help with the experimental setup.

<ol>
	<li>Maxey, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+gravitational+settling+of+aerosol+particles+in+homogeneous+turbulence+and+random+flow+fields.">The gravitational settling of aerosol particles in homogeneous turbulence and random flow fields.</a> Journal of Fluid Mechanics. 174, 441-465 (1987).</li><li>Good, G. H., Ireland, P. J., Bewley, G. P., Bodenschatz, E., Collins, L. R., Warhaft, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Settling+regimes+of+inertial+particles+in+isotropic+turbulence.">Settling regimes of inertial particles in isotropic turbulence.</a> Journal of Fluid Mechanics. 759, R3 (2014).</li><li>Ha, H. K., Maa, J. P. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+suspended+sediment+concentration+and+turbulence+on+settling+velocity+of+cohesive+sediment.">Effects of suspended sediment concentration and turbulence on settling velocity of cohesive sediment.</a> Geosciences Journal. 14 (2), 163-171 (2010).</li><li>Raffel, M., Willert, C. E., Wereley, S. T., Kompenhans, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Particle image velocimetry: A practical guide. , (2007).</li><li>Lu, L., Sick, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-speed+particle+image+velocimetry+near+surfaces.">High-speed particle image velocimetry near surfaces.</a> Journal of Visualized Experiments. 76, e50559 (2013).</li><li>Yang, T. S., Shy, S. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+settling+velocity+of+heavy+particles+in+an+aqueous+near-isotropic+turbulence.">The settling velocity of heavy particles in an aqueous near-isotropic turbulence.</a> Physics of Fluids. 15 (4), 868-880 (2003).</li><li>Jacobs, C. N., Merchant, W., Jendrassak, M., Limpasuvan, V., Gurka, R., Hackett, E. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flow+scales+of+influence+on+the+settling+velocities+of+particles+with+varying+characteristics.">Flow scales of influence on the settling velocities of particles with varying characteristics.</a> PLoS One. 11 (8), 0159645 (2016).</li><li>Murray, S. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Settling+velocities+and+vertical+diffusion+of+particles+in+turbulent+water.">Settling velocities and vertical diffusion of particles in turbulent water.</a> Journal of Geophysical Research. 75 (9), 1647-1654 (1970).</li><li>Nielsen, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Turbulence+effects+on+the+settling+of+suspended+particles.">Turbulence effects on the settling of suspended particles.</a> Journal of Sedimentary Research. 63 (5), 835-838 (1993).</li><li>Kawanisi, K., Shiozaki, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Turbulent+effects+on+the+settling+velocity+of+suspended+sediment.">Turbulent effects on the settling velocity of suspended sediment.</a> Journal of Hydraulic Engineering. 134 (2), 261-266 (2008).</li><li>Maxey, M. R., Corrsin, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gravitational+settling+of+aerosol+particles+in+randomly+oriented+cellular+flow+fields.">Gravitational settling of aerosol particles in randomly oriented cellular flow fields.</a> Journal of the Atmospheric Sciences. 43, 1112-1134 (1986).</li><li>Melling, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tracer+particles+and+seeding+for+particle+image+velocimetry.">Tracer particles and seeding for particle image velocimetry.</a> Measurement Science and Technology. 8 (12), 1406-1416 (1997).</li><li>Hadad, T., Gurka, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+particle+size,+concentration+and+surface+coating+on+turbulent+flow+properties+obtained+using+PIV/PTV.">Effects of particle size, concentration and surface coating on turbulent flow properties obtained using PIV/PTV.</a> Experimental Thermal and Fluid Science. 45, 203-212 (2013).</li><li>Adrian, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Particle-imaging+techniques+for+experimental+fluid+mechanics.">Particle-imaging techniques for experimental fluid mechanics.</a> Annual Review of Fluid Mechanics. 23 (1), 261-304 (1991).</li><li>Shy, S. S., Tang, C. Y., Fann, S. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+nearly+isotropic+turbulence+generated+by+a+pair+of+vibrating+grids.">A nearly isotropic turbulence generated by a pair of vibrating grids.</a> Experimental Thermal and Fluid Science. 14 (3), 251-262 (1997).</li><li>Dietrich, W. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Settling+velocity+of+natural+particles.">Settling velocity of natural particles.</a> Water Resources Research. 18 (6), 1615-1626 (1982).</li><li>Huang, H., Dabiri, D., Gharib, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+errors+of+digital+particle+image+velocimetry.">On errors of digital particle image velocimetry.</a> Measurement Science and Technology. 8 (12), 1427 (1997).</li></ol>

The authors have nothing to disclose.

The method described herein is relatively inexpensive and provides a simple way to simultaneously measure particle trajectories and turbulence in order to examine the influence of flow on particle kinematics. It is noteworthy to mention that flows or particle motions that are strongly three-dimensional are not well-suited for this technique. The out-of-plane motion will result in errors17 in both the 2D tracking and the PIV analysis and should be minimized. In addition, the method requires the con...

There exist a large number of applications in both scientific and engineering fields that involve the behavior of particles in turbulent flows, for example, aerosols in the atmosphere, contaminants and/or sediments in engineered systems, and marine micro-organisms or sediment in the ocean1,2,3. In such applications, it is often of interest to understand how the particles respond to turbulence, which requires simultaneous measurement of the particle kinematics and the fluid dynamics.
Existing technologies to measure particle motions, called particle tracking (PT), which tracks individual particle trajectories, and the statistical technique of particle image velocimetry4,5 (PIV), used to measure flow velocities, both incorporate non-intrusive optical techniques. The main challenge in using these non-intrusive optical techniques to measure both the flow and particle kinematics simultaneously is the separate illumination required for each imaging technique that cannot interfere with the other&#39;s measurement accuracy (e.g., the illumination source for measuring the particle kinematics cannot act as a significant noise source in the fluid velocity measurement and vice-versa). The image contrast in both sets of images needs to be sufficient to obtain reliable results. For example, the PT images are converted to black and white images in order to perform a blob analysis to determine particle positions; thus, insufficient contrast leads to errors in particle position. Poor contrast in PIV images amounts to a low signal-to-noise ratio that will cause inaccuracies in estimation of the fluid velocities.
Here, a relatively low cost and simple method to simultaneously measure both particle kinematics and flow velocities is described. Through use of a high-power monochromatic light emitting diode (LED) line light, where the line refers to the light aperture, and dual-head high-intensity laser, both the particles of interest and the flow field are imaged in the same region simultaneously. The high power of the LED is sufficient for the imaging of the (tracked) particles by the high-speed camera but does not impact the PIV images because the light intensity scattered from PIV tracers is too low. When the dual-head high-intensity laser illuminates the flow field for the PIV images, it occurs over a short time interval and these images are easily identified and removed from the time series obtained by the high-speed PT camera when they are registered. PIV laser pulses recorded in the high-speed image (used for particle tracking) time series can be minimized by not running the two systems at frame acquisition rates that are commensurate with each other. In more advanced setups, one could externally trigger the PT and PIV cameras with a delay that would ensure this does not happen. Finally, by careful consideration of the amount of particles being tracked within the PIV field of view (FOV), any errors introduced by these tracked particles in the correlation analysis of PIV images are already taken into account by the overall error estimation, including errors associated with non-uniform size distribution of PIV tracers within the interrogation window. The vast majority of the PIV seeding tracers are following the flow, yielding accurate flow velocity estimates. These techniques enable the simultaneous direct measurement of both the particle kinematics and flow field in a two-dimensional plane.
This technique is demonstrated by applying it to determine particle settling characteristics in a turbulent flow, similar to that used in studies by Yang and Shy6 and Jacobs et al.7. Particle settling is the final stage in sediment transport, which generally consists of sediment suspension, transport, and settling. In most prior studies that have addressed particle settling in turbulent flows, either particle trajectories or turbulent velocities are not directly measured but inferred theoretically or modeled8,9,10. Details on the interactions between particles and turbulence have most often been investigated using theoretical and numerical models due to the experimental limitations in measuring both simultaneously6,11. We present a particle-turbulence interaction case study in an oscillating grid facility, where we study the settling velocity of particles and their coupling with turbulence. For clarity, hereafter we will refer to the particles under investigation as &#34;particles&#34; and the seeding particles used for the PIV technique as &#34;tracers&#34;; additionally, we will refer to the camera used for the high-speed imaging of the particle trajectories as the &#34;particle tracking&#34;, &#34;PT&#34;, or &#34;high-speed&#34; camera, which measures &#34;high-speed images&#34; and the camera used for the PIV method the &#34;PIV camera&#34;, which measures &#34;images&#34;. The method described herein enables the simultaneous measurement of particles kinematics and fluid dynamics over a pre-defined field of interest within the facility. The obtained data provides a two-dimensional description of the particle-turbulence interaction.

<table><tbody><tr><td>Optical lenses</td><td>CVI LASER OPTICS</td><td>Y2-1025-45, RCC-25.0-15.0-12.7-C, PLCC-25.4-515.1-UV</td><td>Other optics companies are acceptable. Spherical and cyclindrical lenses for generating PIV light sheet.</td></tr><tr><td>Camera lens for PIV</td><td>Nikon</td><td>Nikkor 105mm f/2D</td><td>Other camera lens companies are acceptable. Camera lens for PIV imaging.</td></tr><tr><td>Camera lens for high-speed</td><td>Nikon</td><td>Nikkor 50mm f/1.8D</td><td>Other camera lens companies are acceptable. Camera lens for high-speed imaging.</td></tr><tr><td>Dual-head pulsed laser</td><td>Quantel</td><td>EverGreen: 532nm, 70mJ@15Hz</td><td>Other laser companies are acceptable. Dual-head Pulsed-laser for PIV: Nd:YAG</td></tr><tr><td>LED line light</td><td>Gardasoft Vision, Ltd.</td><td>VLX2 LED Line Lighting - Green - GAR-VLX2-250-LWD-G-T04</td><td>Other companies are acceptable. Line light for LED.</td></tr><tr><td>PIV seeding particles/tracers</td><td>Potters Industries</td><td>SPHERICAL Hollow Glass Spheres: 11 mm average diameter</td><td>Other companies are acceptable. PIV seeding particles</td></tr><tr><td>CCD cross-correlation camera</td><td>TSI, Inc.</td><td>POWERVIEW 11M: CCD, Double-exposure, 4008x2672 pixels @ 4.2 Hz with 12bit dynmic range</td><td>Other companies are acceptable. Double-exposurem, CCD camera for PIV imaging.</td></tr><tr><td>High-speed camera</td><td>Photron</td><td>FASTCAM SA3; Model 60K: 1024x1024 pixels @ 1kHz</td><td>Other companies are acceptable. CMOS camera for high speed imaging.</td></tr><tr><td>Synchronizer</td><td>TSI, Inc.</td><td>LASERPULSE SYNCHRONIZER 610036</td><td>Other companies are acceptable. Synchronize the acquisition of the PIV camera and laser.</td></tr><tr><td>Calibration target</td><td>TSI, Inc.</td><td></td><td>Other companies are acceptable. Precision target for image calibration.</td></tr></tbody></table>

simultaneous measurement of turbulence and particle kinematics using flow imaging techniques

Numerous problems in scientific and engineering fields involve understanding the kinematics of particles in turbulent flows, such as contaminants, marine micro-organisms, and/or sediments in the ocean, or fluidized bed reactors and combustion processes in engineered systems. In order to study the effect of turbulence on the kinematics of particles in such flows, simultaneous measurements of both the flow and particle kinematics are required. Non-intrusive, optical flow measurement techniques for measuring turbulence, or for tracking particles, exist but measuring both simultaneously can be challenging due to interference between the techniques. The method presented herein provides a low cost and relatively simple method to make simultaneous measurements of the flow and particle kinematics. A cross section of the flow is measured using a particle image velocimetry (PIV) technique, which provides two components of velocity in the measurement plane. This technique utilizes a pulsed-laser for illumination of the seeded flow field that is imaged by a digital camera. The particle kinematics are simultaneously imaged using a light emitting diode (LED) line light that illuminates a planar cross section of the flow that overlaps with the PIV field-of-view (FOV). The line light is of low enough power that it does not affect the PIV measurements, but powerful enough to illuminate the larger particles of interest imaged using the high-speed camera. High-speed images that contain the laser pulses from the PIV technique are easily filtered by examining the summed intensity level of each high-speed image. By making the frame rate of the high-speed camera incommensurate with that of the PIV camera frame rate, the number of contaminated frames in the high-speed time series can be minimized. The technique is suitable for mean flows that are predominantly two-dimensional, contain particles that are at least 5 times the mean diameter of the PIV seeding tracers, and are low in concentration.

A schematic of the experimental setup is shown in Figure 1. The figure shows the arrangement of light sheets (LED and laser), the overlap in the FOVs, and the position of the FOVs relative to the oscillating grid and tank walls. The turbulence and particles are measured simultaneously as described in the protocol section. Figure 2 shows example results of the measurements of instantaneous velocity and vorticity along with sample ...

Watch this Scientific Journal Video about Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques at JoVE.com

Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques

The technique described herein offers a low cost and relatively simple method to simultaneously measure particle kinematics and turbulence in flows with low particle concentrations. The turbulence is measured using particle image velocimetry (PIV), and particle kinematics are calculated from images obtained with a high-speed camera in an overlapping field-of-view.

Numerous problems in scientific and engineering fields involve understanding the kinematics of particles in turbulent flows, such as contaminants, marine ...

simultaneous-measurement-turbulence-particle-kinematics-using-flow

Education

Research

JoVE Core

JoVE Journal

Physics

Mechanical Engineering

Engineering

Unit 1

An Introduction to Statics

Kinematics of a Particle

Newton's Laws of Motion

SCIENTISTS IN ACTION

6.9K 조회수.  Coastal Carolina University. The technique described herein offers a low cost and relatively simple method to simultaneously measure particle kinematics and turbulence in flows with low particle concentrations. The turbulence is measured using particle image velocimetry (PIV), and particle kinematics are calculated from images obtained with a high-speed camera in an overlapping field-of-view.

비디오: Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques

Determining 3D Flow Fields via Multi-camera Light Field Imaging

In the field of fluid mechanics, the resolution of computational schemes has outpaced experimental methods and widened the gap between predicted and observed phenomena in fluid flows. Thus, a need exists for an accessible method capable of resolving three-dimensional (3D) data sets for a range of problems. We present a novel technique for performing quantitative 3D imaging of many types of flow fields. The 3D technique enables investigation of complicated velocity fields and bubbly flows. Measurements of these types present a variety of challenges to the instrument. For instance, optically dense bubbly multiphase flows cannot be readily imaged by traditional, non-invasive flow measurement techniques due to the bubbles occluding optical access to the interior regions of the volume of interest. By using Light Field Imaging we are able to reparameterize images captured by an array of cameras to reconstruct a 3D volumetric map for every time instance, despite partial occlusions in the volume. The technique makes use of an algorithm known as synthetic aperture (SA) refocusing, whereby a 3D focal stack is generated by combining images from several cameras post-capture 1. Light Field Imaging allows for the capture of angular as well as spatial information about the light rays, and hence enables 3D scene reconstruction. Quantitative information can then be extracted from the 3D reconstructions using a variety of processing algorithms. In particular, we have developed measurement methods based on Light Field Imaging for performing 3D particle image velocimetry (PIV), extracting bubbles in a 3D field and tracking the boundary of a flickering flame. We present the fundamentals of the Light Field Imaging methodology in the context of our setup for performing 3DPIV of the airflow passing over a set of synthetic vocal folds, and show representative results from application of the technique to a bubble-entraining plunging jet.

A technique for performing quantitative three-dimensional (3D) imaging for a range of fluid flows is presented. Using concepts from the area of Light Field Imaging, we reconstruct 3D volumes from arrays of images. Our 3D results span a broad range including velocity fields and multi-phase bubble size distributions.

멀티 카메라 라이트 필드 영상을 통해 3D 흐름 필드를 결정하는

In the field of fluid mechanics, the resolution of computational schemes has outpaced experimental methods and widened the gap between predicted and ...

연구

공학

Quantitatively Measuring In situ Flows using a Self-Contained Underwater Velocimetry Apparatus (SCUVA)

The ability to directly measure velocity fields in a fluid environment is necessary to provide empirical data for studies in fields as diverse as oceanography, ecology, biology, and fluid mechanics. Field measurements introduce practical challenges such as environmental conditions, animal availability, and the need for field-compatible measurement techniques. To avoid these challenges, scientists typically use controlled laboratory environments to study animal-fluid interactions. However, it is reasonable to question whether one can extrapolate natural behavior (i.e., that which occurs in the field) from laboratory measurements. Therefore, in situ quantitative flow measurements are needed to accurately describe animal swimming in their natural environment.
We designed a self-contained, portable device that operates independent of any connection to the surface, and can provide quantitative measurements of the flow field surrounding an animal. This apparatus, a self-contained underwater velocimetry apparatus (SCUVA), can be operated by a single scuba diver in depths up to 40 m. Due to the added complexity inherent of field conditions, additional considerations and preparation are required when compared to laboratory measurements. These considerations include, but are not limited to, operator motion, predicting position of swimming targets, available natural suspended particulate, and orientation of SCUVA relative to the flow of interest. The following protocol is intended to address these common field challenges and to maximize measurement success.

Quantitatively Measuring In situ Flows using a Self-Contained Underwater Velocimetry Apparatus SCUVA

This protocol provides instructions on how to use a self-contained underwater velocimetry apparatus (SCUVA), which is designed for quantification of in situ animal-generated flows. In addition, this protocol addresses challenges posed by field conditions, and includes operator motion, predicting position of animals, and orientation of SCUVA.

양적 측정 현장에서</em독립적인 수중 Velocimetry 장치 (SCUVA)을 사용하여> 흐름

The ability to directly measure velocity fields in a fluid environment is necessary to provide empirical data for studies in fields as diverse as ...

생체공학

Fabrication, Operation and Flow Visualization in Surface-acoustic-wave-driven Acoustic-counterflow Microfluidics

Surface acoustic waves (SAWs) can be used to drive liquids in portable microfluidic chips via the acoustic counterflow phenomenon. In this video we present the fabrication protocol for a multilayered SAW acoustic counterflow device. The device is fabricated starting from a lithium niobate (LN) substrate onto which two interdigital transducers (IDTs) and appropriate markers are patterned. A polydimethylsiloxane (PDMS) channel cast on an SU8 master mold is finally bonded on the patterned substrate. Following the fabrication procedure, we show the techniques that allow the characterization and operation of the acoustic counterflow device in order to pump fluids through the PDMS channel grid. We finally present the procedure to visualize liquid flow in the channels. The protocol is used to show on-chip fluid pumping under different flow regimes such as laminar flow and more complicated dynamics characterized by vortices and particle accumulation domains.

In this video we first describe fabrication and operation procedures of a surface acoustic wave (SAW) acoustic counterflow device. We then demonstrate an experimental setup that allows for both qualitative flow visualization and quantitative analysis of complex flows within the SAW pumping device.

Surface acoustic waves (SAWs) can be used to drive liquids in portable microfluidic chips via the acoustic counterflow phenomenon. In this video we ...

High-speed Particle Image Velocimetry Near Surfaces

Multi-dimensional and transient flows play a key role in many areas of science, engineering, and health sciences but are often not well understood. The complex nature of these flows may be studied using particle image velocimetry (PIV), a laser-based imaging technique for optically accessible flows. Though many forms of PIV exist that extend the technique beyond the original planar two-component velocity measurement capabilities, the basic PIV system consists of a light source (laser), a camera, tracer particles, and analysis algorithms. The imaging and recording parameters, the light source, and the algorithms are adjusted to optimize the recording for the flow of interest and obtain valid velocity data. 
Common PIV investigations measure two-component velocities in a plane at a few frames per second. However, recent developments in instrumentation have facilitated high-frame rate (&gt; 1 kHz) measurements capable of resolving transient flows with high temporal resolution. Therefore, high-frame rate measurements have enabled investigations on the evolution of the structure and dynamics of highly transient flows. These investigations play a critical role in understanding the fundamental physics of complex flows.
A detailed description for performing high-resolution, high-speed planar PIV to study a transient flow near the surface of a flat plate is presented here. Details for adjusting the parameter constraints such as image and recording properties, the laser sheet properties, and processing algorithms to adapt PIV for any flow of interest are included.

A procedure for studying transient flows near boundaries using high-resolution, high-speed particle image velocimetry (PIV) is described here. PIV is a non-intrusive measurement technique applicable to any optically accessible flow by optimizing several parameter constraints such as the image and recording properties, the laser sheet properties, and analysis algorithms.

표면 근처 고속 입자 이미지 유속계

Multi-dimensional and transient flows play a key role in many areas of science, engineering, and health sciences but are often not well understood. The ...

Confocal Imaging of Confined Quiescent and Flowing Colloid-polymer Mixtures

The behavior of confined colloidal suspensions with attractive interparticle interactions is critical to the rational design of materials for directed assembly1-3, drug delivery4, improved hydrocarbon recovery5-7, and flowable electrodes for energy storage8. Suspensions containing fluorescent colloids and non-adsorbing polymers are appealing model systems, as the ratio of the polymer radius of gyration to the particle radius&#160;and concentration of polymer control the range and strength of the interparticle attraction, respectively. By tuning the polymer properties and the volume fraction of the colloids, colloid fluids, fluids of clusters, gels, crystals, and glasses can be obtained9.&#160;Confocal microscopy, a variant of fluorescence microscopy, allows an optically transparent and fluorescent sample to be imaged with high spatial and temporal resolution in three dimensions. In this technique, a small pinhole or slit blocks the emitted fluorescent light from regions of the sample that are outside the focal volume of the microscope optical system. As a result, only a thin section of the sample in the focal plane is imaged. This technique is particularly well suited to probe the structure and dynamics in dense colloidal suspensions at the single-particle scale: the particles are large enough to be resolved using visible light and diffuse slowly enough to be captured at typical scan speeds of commercial confocal systems10. Improvements in scan speeds and analysis algorithms have also enabled quantitative confocal imaging of flowing suspensions11-16,37.&#160;In this paper, we demonstrate confocal microscopy experiments to probe the confined phase behavior and flow properties of colloid-polymer mixtures. We first prepare colloid-polymer mixtures that are density- and refractive-index matched. Next, we report a standard protocol for imaging quiescent dense colloid-polymer mixtures under varying confinement in thin wedge-shaped cells. Finally, we demonstrate a protocol for imaging colloid-polymer mixtures during microchannel flow.

Confocal microscopy is used to image quiescent and flowing colloid-polymer mixtures, which are studied as model systems for attractive suspensions. Image analysis algorithms are used to calculate structural and dynamic metrics for the colloidal particles that measure changes due to geometric confinement.

밀폐 무부하 흐르는 콜로이드 중합체 혼합물의 공 촛점 이미징

The behavior of confined colloidal suspensions with attractive interparticle interactions is critical to the rational design of materials for directed ...

화학

Methods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence

Experimental methods are presented for measuring the rotational and translational motion of anisotropic particles in turbulent fluid flows. 3D printing technology is used to fabricate particles with slender arms connected at a common center. Shapes explored are crosses (two perpendicular rods), jacks (three perpendicular rods), triads (three rods in triangular planar symmetry), and tetrads (four arms in tetrahedral symmetry). Methods for producing on the order of 10,000 fluorescently dyed particles are described. Time-resolved measurements of their orientation and solid-body rotation rate are obtained from four synchronized videos of their motion in a turbulent flow between oscillating grids with R&#955; = 91. In this relatively low-Reynolds number flow, the advected particles are small enough that they approximate ellipsoidal tracer particles. We present results of time-resolved 3D trajectories of position and orientation of the particles as well as measurements of their rotation rates.

We use 3D printing to fabricate anisotropic particles in the shapes of jacks, crosses, tetrads, and triads, whose alignments and rotations in turbulent fluid flow can be measured from multiple simultaneous video images.

Experimental methods are presented for measuring the rotational and translational motion of anisotropic particles in turbulent fluid flows. 3D printing ...

Micro-particle Image Velocimetry for Velocity Profile Measurements of Micro Blood Flows

Micro-particle image velocimetry (&mu;PIV) is used to visualize paired images of micro particles seeded in blood flows. The images are cross-correlated to give an accurate velocity profile. A protocol is presented for &mu;PIV measurements of blood flows in microchannels. At the scale of the microcirculation, blood cannot be considered a homogeneous fluid, as it is a suspension of flexible particles suspended in plasma, a Newtonian fluid. Shear rate, maximum velocity, velocity profile shape, and flow rate can be derived from these measurements. Several key parameters such as focal depth, particle concentration, and system compliance, are presented in order to ensure accurate, useful data along with examples and representative results for various hematocrits and flow conditions.

Micro-particle image velocimetry (&mu;PIV) is used to visualize paired images of micro particles seeded in blood flows which are cross-correlated to give an accurate velocity profile. Shear rate, maximum velocity, velocity profile shape, and flow rate, each of which has clinical applications, can be derived from these measurements.

마이크로 혈액 흐름의 속도 분포 측정을위한 마이크로 입자 이미지 유속계

Micro-particle image velocimetry (&mu;PIV) is used to visualize paired images of micro particles seeded in blood flows. The images are cross-correlated to ...

Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow

3D-PTV is a quantitative flow measurement technique that aims to track the Lagrangian paths of a set of particles in three dimensions using stereoscopic recording of image sequences. The basic components, features, constraints and optimization tips of a 3D-PTV topology consisting of a high-speed camera with a four-view splitter are described and discussed in this article. The technique is applied to the intermediate flow field (5 &#60;x/d &#60;25) of a circular jet at Re &#8776; 7,000. Lagrangian flow features and turbulence quantities in an Eulerian frame are estimated around ten diameters downstream of the jet origin and at various radial distances from the jet core. Lagrangian properties include trajectory, velocity and acceleration of selected particles as well as curvature of the flow path, which are obtained from the Frenet-Serret equation. Estimation of the 3D velocity and turbulence fields around the jet core axis at a cross-plane located at ten diameters downstream of the jet is compared with literature, and the power spectrum of the large-scale streamwise velocity motions is obtained at various radial distances from the jet core.

A three-dimensional particle tracking velocimetry (3D-PTV) system based on a high-speed camera with a four-view splitter is described here. The technique is applied to a jet flow from a circular pipe in the vicinity of ten diameters downstream at Reynolds number Re &#8776; 7,000.

3D-PTV is a quantitative flow measurement technique that aims to track the Lagrangian paths of a set of particles in three dimensions using stereoscopic ...

Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods

It is well known that the flow field over a delta wing is dominated by a pair of counter rotating leading edge vortices (LEV). However, their mechanism is not well understood. The flow visualization technique is a promising non-intrusive method to illustrate the complex flow field spatially and temporally. A basic flow visualization setup consists of a high-powered laser and optic lenses to generate the laser sheet, a camera, a tracer particle generator, and a data processor. The wind tunnel setup, the specifications of devices involved, and the corresponding parameter settings are dependent on the flow features to be obtained.
Normal smoke wire flow visualization uses a smoke wire to demonstrate the flow streaklines. However, the performance of this method is limited by poor spatial resolution when it is conducted in a complex flow field. Therefore, an improved smoke flow visualization technique has been developed. This technique illustrates the large-scale global LEV flow field and the small-scale shear layer flow structure at the same time, providing a valuable reference for later detailed particle image velocimetry (PIV) measurement.
In this paper, the application of the improved smoke flow visualization and PIV measurement to study the unsteady flow phenomena over a delta wing is demonstrated. The procedure and cautions for conducting the experiment are listed, including wind tunnel setup, data acquisition, and data processing. The representative results show that these two flow visualization methods are effective techniques for investigating the three-dimensional flow field qualitatively and quantitatively.

Here, we present a protocol to observe unsteady vortical flows over a delta wing using a modified smoke flow visualization technique and investigate the mechanism responsible for the oscillations of the leading-edge vortex breakdown locations.

It is well known that the flow field over a delta wing is dominated by a pair of counter rotating leading edge vortices (LEV). However, their mechanism is ...

Methods for Characterizing the Co-development of Biofilm and Habitat Heterogeneity

Biofilms are surface-attached microbial communities that have complex structures and produce significant spatial heterogeneities. Biofilm development is strongly regulated by the surrounding flow and nutritional environment. Biofilm growth also increases the heterogeneity of the local microenvironment by generating complex flow fields and solute transport patterns. To investigate the development of heterogeneity in biofilms and interactions between biofilms and their local micro-habitat, we grew mono-species biofilms of Pseudomonas aeruginosa and dual-species biofilms of P. aeruginosa and Escherichia coli under nutritional gradients in a microfluidic flow cell. We provide detailed protocols for creating nutrient gradients within the flow cell and for growing and visualizing biofilm development under these conditions. We also present protocols for a series of optical methods to quantify spatial patterns in biofilm structure, flow distributions over biofilms, and mass transport around and within biofilm colonies. These methods support comprehensive investigations of the co-development of biofilm and habitat heterogeneity.

Biofilms have complex interactions with their surrounding environment. To comprehensively investigate biofilm-environment interactions, we present here a series of methods to create heterogeneous chemical environment for biofilm development, to quantify local flow velocity, and to analyze mass transport in and around biofilm colonies.

바이오 필름 및 서식지의 이질성의 공동 개발을 특성화하기위한 방법

Biofilms are surface-attached microbial communities that have complex structures and produce significant spatial heterogeneities. Biofilm development is ...