The work was supported by the Christian-Albrechts-University, the State of Schleswig-Holstein, and the Deutsche Forschungsgemeinschaft (especially STO-643/2, STO-643/5 and STO-643/10).
Norbert Stock would like to thank the B.Sc., M.Sc., and doctoral students, as well as the cooperation partners who have carried out many interesting projects using the high-throughput methodology, in particular Prof. Bein from the Ludwig-Maximilians-Universit&#228;t in Munich, who played a major role in the development of the reactors.

In this protocol, the HT investigation of chemical systems to discover new crystalline materials, using Al-CAU-6029 as an example, is described.
1. Design of Experiment (DOE)
NOTE: The first step is to set up a synthesis plan, which requires knowledge of the reactor setup (Figure 2), reactants, and solvents used. This synthesis planning procedure is adapted to performing 24 or 48 reactions under a ...

Synthesis and Discovery of Phosphonate-Based MOFs: A Solvothermal Approach

<ol>
	<li>Kaskel, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The Chemistry of Metal-Organic Frameworks: Synthesis, Characterization, and Applications. , (2016).</li><li>Ding, M., Cai, X., Jiang, H. -. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improving+MOF+stability:+approaches+and+applications.">Improving MOF stability: approaches and applications.</a> Chemical Science. 10 (44), 10209-10230 (2019).</li><li>Stock, N., Biswas, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+metal-organic+frameworks+(MOFs):+routes+to+various+MOF+topologies,+morphologies,+and+composites.">Synthesis of metal-organic frameworks (MOFs): routes to various MOF topologies, morphologies, and composites.</a> Chemical Reviews. 112 (2), 933-969 (2012).</li><li>Shimizu, G. K. H., Vaidhyanathan, R., Taylor, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phosphonate+and+sulfonate+metal+organic+frameworks.">Phosphonate and sulfonate metal organic frameworks.</a> Chemical Society Reviews. 38 (5), 1430-1449 (2009).</li><li>Yuan, S., Qin, J. -. S., Lollar, C. T., Zhou, H. -. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stable+metal-organic+frameworks+with+group+4+metals:+current+status+and+trends.">Stable metal-organic frameworks with group 4 metals: current status and trends.</a> ACS Central Science. 4 (4), 440-450 (2018).</li><li>Devic, T., Serre, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+valence+3p+and+transition+metal+based+MOFs.">High valence 3p and transition metal based MOFs.</a> Chemical Society Reviews. 43 (16), 6097-6115 (2014).</li><li>Rhauderwiek, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Highly+stable+and+porous+porphyrin-based+zirconium+and+hafnium+phosphonates-electron+crystallography+as+an+important+tool+for+structure+elucidation.">Highly stable and porous porphyrin-based zirconium and hafnium phosphonates-electron crystallography as an important tool for structure elucidation.</a> Chemical Science. 9 (24), 5467-5478 (2018).</li><li>Steinke, F., Otto, T., Ito, S., W&#246;hlbrandt, S., Stock, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isostructural+family+of+rare-earth+MOFs+synthesized+from+1,1,2,2-Tetrakis(4-phosphonophenyl)ethylene.">Isostructural family of rare-earth MOFs synthesized from 1,1,2,2-Tetrakis(4-phosphonophenyl)ethylene.</a> European Journal of Inorganic Chemistry. 2022 (34), 2022005562 (2022).</li><li>Zhu, Y. -. P., Ma, T. -. Y., Liu, Y. -. L., Ren, T. -. Z., Yuan, Z. -. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metal+phosphonate+hybrid+materials:+from+densely+layered+to+hierarchically+nanoporous+structures.">Metal phosphonate hybrid materials: from densely layered to hierarchically nanoporous structures.</a> Inorganic Chemistry Frontiers. 1 (5), 360-383 (2014).</li><li>Glavinovi&#263;, M., Perras, J. H., Gelfand, B. S., Lin, J. -. B., Shimizu, G. K. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Orthogonalization+of+polyaryl+linkers+as+a+route+to+more+porous+phosphonate+metal-organic+frameworks.">Orthogonalization of polyaryl linkers as a route to more porous phosphonate metal-organic frameworks.</a> Chemistry. 28 (31), 202200874 (2022).</li><li>Y&#252;cesan, G., Zorlu, Y., Stricker, M., Beckmann, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metal-organic+solids+derived+from+arylphosphonic+acids.">Metal-organic solids derived from arylphosphonic acids.</a> Coordination Chemistry Reviews. 369, 105-122 (2018).</li><li>Wharmby, M. T., Mowat, J. P. S., Thompson, S. P., Wright, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extending+the+pore+size+of+crystalline+metal+phosphonates+toward+the+mesoporous+regime+by+isoreticular+synthesis.">Extending the pore size of crystalline metal phosphonates toward the mesoporous regime by isoreticular synthesis.</a> Journal of the American Chemical Society. 133 (5), 1266-1269 (2011).</li><li>Zheng, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Overcoming+the+crystallization+and+designability+issues+in+the+ultrastable+zirconium+phosphonate+framework+system.">Overcoming the crystallization and designability issues in the ultrastable zirconium phosphonate framework system.</a> Nature Communications. 8, 15369 (2017).</li><li>Dines, M. B., Cooksey, R. E., Griffith, P. C., Lane, R. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mixed-component+layered+tetravalent+metal+phosphonates/phosphates+as+precursors+for+microporous+materials.">Mixed-component layered tetravalent metal phosphonates/phosphates as precursors for microporous materials.</a> Inorganic Chemistry. 22 (6), 1003-1004 (1983).</li><li>Hermer, N., Reinsch, H., Mayer, P., Stock, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+characterisation+of+the+porous+zinc+phosphonate+[Zn2(H2PPB)(H2O)2]&#183;xH2O.">Synthesis and characterisation of the porous zinc phosphonate [Zn2(H2PPB)(H2O)2]&#183;xH2O.</a> CrystEngComm. 18 (42), 8147-8150 (2016).</li><li>Rhauderwiek, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crystalline+and+permanently+porous+porphyrin-based+metal+tetraphosphonates.">Crystalline and permanently porous porphyrin-based metal tetraphosphonates.</a> Chemical Communications. 54 (4), 389-392 (2018).</li><li>Steinke, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+structure+evolution+in+metal+carbazole+diphosphonates+followed+by+electron+diffraction.">Synthesis and structure evolution in metal carbazole diphosphonates followed by electron diffraction.</a> Inorganic Chemistry. 62 (1), 35-42 (2023).</li><li>Taddei, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+first+route+to+highly+stable+crystalline+microporous+zirconium+phosphonate+metal-organic+frameworks.">The first route to highly stable crystalline microporous zirconium phosphonate metal-organic frameworks.</a> Chemical Communications. 50 (94), 14831-14834 (2014).</li><li>Stock, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+investigations+employing+solvothermal+syntheses.">High-throughput investigations employing solvothermal syntheses.</a> Microporous and Mesoporous Materials. 129 (3), 287-295 (2010).</li><li>Clayson, I. G., Hewitt, D., Hutereau, M., Pope, T., Slater, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+throughput+methods+in+the+synthesis,+characterization,+and+optimization+of+porous+materials.">High throughput methods in the synthesis, characterization, and optimization of porous materials.</a> Advanced Materials. 32 (44), 2002780 (2020).</li><li>Clearfield, A., Demadis, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Metal Phosphonate Chemistry: From Synthesis to Applications. , (2011).</li><li>Mennen, S. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+evolution+of+high-throughput+experimentation+in+pharmaceutical+development+and+perspectives+on+the+future.">The evolution of high-throughput experimentation in pharmaceutical development and perspectives on the future.</a> Organic Process Research &amp; Development. 23 (6), 1213-1242 (2019).</li><li>Yang, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+methods+in+the+discovery+and+study+of+biomaterials+and+materiobiology.">High-throughput methods in the discovery and study of biomaterials and materiobiology.</a> Chemical Reviews. 121 (8), 4561-4677 (2021).</li><li>Banerjee, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+synthesis+of+zeolitic+imidazolate+frameworks+and+application+to+CO2+capture.">High-throughput synthesis of zeolitic imidazolate frameworks and application to CO2 capture.</a> Science. 319 (5865), 939-943 (2008).</li><li>Reinsch, H., Stock, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+studies+of+highly+porous+Al-based+MOFs.">High-throughput studies of highly porous Al-based MOFs.</a> Microporous and Mesoporous Materials. 171, 156-165 (2013).</li><li>Reimer, N., Reinsch, H., Inge, A. K., Stock, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+Al-MOFs+based+on+sulfonyldibenzoate+ions:+a+rare+example+of+intralayer+porosity.">New Al-MOFs based on sulfonyldibenzoate ions: a rare example of intralayer porosity.</a> Inorganic Chemistry. 54 (2), 492-501 (2015).</li><li>Tollitt, A. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+discovery+of+a+rhombohedral+twelve-connected+zirconium-based+metal-organic+framework+with+ordered+terephthalate+and+fumarate+linkers.">High-throughput discovery of a rhombohedral twelve-connected zirconium-based metal-organic framework with ordered terephthalate and fumarate linkers.</a> Angewandte Chemie. 60 (52), 26939-26946 (2021).</li><li>Palomba, J. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+screening+of+solid-state+catalysts+for+nerve+agent+degradation.">High-throughput screening of solid-state catalysts for nerve agent degradation.</a> Chemical Communications. 54 (45), 5768-5771 (2018).</li><li>Reichenau, T. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Targeted+synthesis+of+an+highly+stable+aluminium+phosphonate+metal-organic+framework+showing+reversible+HCl+adsorption.">Targeted synthesis of an highly stable aluminium phosphonate metal-organic framework showing reversible HCl adsorption.</a> Angewandte Chemie. , (2023).</li><li>Biemmi, E., Christian, S., Stock, N., Bein, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+screening+of+synthesis+parameters+in+the+formation+of+the+metal-organic+frameworks+MOF-5+and+HKUST-1.">High-throughput screening of synthesis parameters in the formation of the metal-organic frameworks MOF-5 and HKUST-1.</a> Microporous and Mesoporous Materials. 117 (1), 111-117 (2009).</li><li>STOE &amp; Cie GmbH. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=WinXPOW+v.3.1.">WinXPOW v.3.1.</a> STOE &amp; Cie GmbH. , (2016).</li><li>Groom, C. R., Bruno, I. J., Lightfoot, M. P., Ward, S. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Cambridge+structural+database.">The Cambridge structural database.</a> Acta Crystallographica Section B, Structural Science. Crystal Engineering and Materials. 72, 171-179 (2016).</li><li>Bruno, I. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+software+for+searching+the+Cambridge+Structural+Database+and+visualizing+crystal+structures.">New software for searching the Cambridge Structural Database and visualizing crystal structures.</a> Acta Crystallographica. Section B, Structural Science. 58, 389-397 (2002).</li><li>Hermer, N., Wharmby, M. T., Stock, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> CCDC 1499757: Experimental Crystal Structure Determination. , (2017).</li><li>Cawse, J. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Experimental Design for Combinatorial and High Throughput Materials Development. , (2003).</li><li>Dhanumalayan, E., Joshi, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Performance+properties+and+applications+of+polytetrafluoroethylene+(PTFE)-a+review.">Performance properties and applications of polytetrafluoroethylene (PTFE)-a review.</a> Advanced Composites and Hybrid Materials. 1, 247-268 (2018).</li><li>Lenzen, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scalable+green+synthesis+and+full-scale+test+of+the+metal-organic+framework+CAU-10-H+for+use+in+adsorption-driven+chillers.">Scalable green synthesis and full-scale test of the metal-organic framework CAU-10-H for use in adsorption-driven chillers.</a> Advanced Materials. 30 (6), 1705869 (2018).</li></ol>

Due to the complexity of the HT method, the individual steps and the method itself are discussed in the following sections. The first part covers the critical steps for each working step of the HT workflow (Figure 1), possible modifications, and limitations of the technique, where applicable. At the end, a general discussion also including the significance of the HT method with respect to existing methods and future applications is presented. 
In the first step of...

Metal-organic frameworks (MOFs) are porous, crystalline compounds whose structures consist of metal-containing nodes, like metal ions or metal-oxygen clusters, which are connected by organic molecules (linkers)1. By varying the metal-containing nodes as well as the linker, a variety of compounds can be obtained that exhibit a wide range of properties and therefore have potential applications in different fields1.
The stability of a material is important for its application1,2,3. Therefore, MOFs containing tri- or tetravalent metal ions, such as Al3+, Cr3+, Ti4+, or Zr4+, with carboxylate2 or phosphonate4 linker molecules have been the focus of many investigations5,6,7. In addition to the direct synthesis of stable MOFs, the enhancement of stability through post-synthetic modifications as well as the formation of composites is a field of interest2. Phosphonate-based MOFs have been less often reported compared to carboxylate-based MOFs8. One reason is the higher coordination flexibility of the CPO32- group compared to the -CO2- group, which often leads to the formation of dense structures and greater structural diversity8,9,10,11. In addition, phosphonic acids often must be synthesized, as they are rarely available on the market. While some metal phosphonates exhibit exceptional chemical stability10, systematic access to isoreticular metal phosphonate MOFs, which allows the tuning of properties, is still a topic of high relevance12,13. Different strategies for the synthesis of porous metal phosphonates have been investigated, such as incorporating defects into otherwise dense layers, for example, by partially replacing phosphonate with phosphate ligands4,14. However, as defective structures are poorly reproducible, and the pores are not uniform, other strategies have been developed. In recent years, the use of sterically demanding or orthogonalized phosphonic acids as linker molecules have emerged as a suitable strategy for the preparation of porous metal phosphonates4,8,10,11,13,15,16,17,18. However, a universal synthesis route for porous metal phosphonates has not yet been discovered. As a result, the synthesis of metal phosphonates is often a process of trial and error, requiring the investigation of many synthesis parameters.
The parameter space of a reaction system includes chemical and process parameters and can be vast19. It consists of parameters such as the type of starting material (metal salt), molar ratios of starting materials, additives for pH adjustment, modulators, type of solvent, solvent mixtures, volumes, reaction temperatures, times, etc.19,20. A moderate number of parameter variations can easily result in several hundred individual reactions, making a carefully considered synthesis plan and well-chosen parameter space necessary. For example, a simple study using six molar ratios of the linker to the metal (e.g., M:L = 1:1, 1:2, ... to 1:6) and four different concentrations of an additive and keeping the other parameter constant, leads already to 6 x 4 = 24 experiments. Using four concentrations, five solvents, and three reaction temperatures would necessitate carrying out the 24 experiments 60 times, resulting in 1,440 individual reactions.
High-throughput (HT) methods are based on the concepts of miniaturization, parallelization, and automation, to varying degrees depending on the scientific question being addressed19,20. As such, they can be used to accelerate the investigation of multi-parameter systems and are an ideal tool for the discovery of new compounds, as well as synthesis optimization19,20. HT methods have been used successfully in different fields, ranging from drug discovery to materials science20. They have also been used for the investigation of porous materials such as zeolites and MOFs in solvothermal reactions, as recently summarized20. A typical HT workflow for solvothermal synthesis consists of six steps (Figure 1)19,20,21: a) selection of the parameter space of interest (i.e., the design of experiment [DOE]), which can be done manually or by using software; b) dosing of the reagents into the vessels; c) solvothermal synthesis; d) isolation and workup; e) characterization, which is typically done with powder X-ray diffraction (PXRD); and f) data evaluation, which is followed by step one again.
Parallelization and miniaturization are achieved in solvothermal reactions through the use of multiclaves, often based on the well-established 96-well plate format most commonly used in biochemistry and pharmacy19,20,22,23. Various reactor designs have been reported and several groups have constructed their own reactors19,20. Reactor choice depends on the chemical system of interest, especially the reaction temperature, (autogenous) pressure, and reactor stability19,20. For example, in a systematic study of zeolitic imidazolate frameworks (ZIFs), Banerjee et al.25 used the 96-well glass plate format to perform over 9600 reactions24. For reactions under solvothermal conditions, customized polytetrafluoroethylene (PTFE) blocks, or multiclaves with 24 or 48 individual PTFE inserts, have been described among others by the Stock group19,20.&#160;They are routinely employed, for example, in the synthesis of metal carboxylates and phosphonates. As such, Reinsch et al.25 reported the advantages of the methodology in the field of porous aluminum MOFs25. The in-house made HT reactor systems (Figure 2), which allow 24 or 48 reactions to be studied simultaneously, contain PTFE inserts with a total volume of 2.655 mL and 0.404 mL, respectively (Figure 2A,B). Usually, no more than 1 mL or 0.1 mL, respectively, is used. While these reactors are used in conventional ovens, microwave-assisted heating using SiC blocks and small glass vessels has also been reported26.
The automation of studies leads to time savings and improved reproducibility, as influence of the human factor is minimized20. The degree to which automation has been used varies strongly19,20. Fully automated commercial systems, including pipetting20 or weighting capabilities20, are known. A recent example is the use of a liquid-handling robot to study ZrMOFs, reported by the group of Rosseinsky27. Automated analysis can be performed by PXRD using a diffractometer equipped with an xy stage. In another example, a plate reader was used to screen solid-state catalysts, mainly MOFs, for HT screening of nerve agent degradation28. Samples can be characterized in a single run without the need for manual sample or position changes. Automation does not eliminate human error, but it reduces the possibility of its occurring19,20.
Ideally, all steps in a HT workflow should be adapted in terms of parallelization, miniaturization, and automation to eliminate possible bottlenecks and maximize efficiency. However, if it is not possible to establish a HT workflow in its entirety, it may be helpful to adopt selected steps/tools for one&#39;s own research. The use of multiclaves for 24 reactions is particularly useful here. The technical drawings of the in-house made equipment used in this study (as well as others) are published for the first time and can be found in Supplementary File 1, Supplementary File 2, Supplementary File 3, and Supplementary File 4.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>AlCl3&#183;6H2O</td>
			<td>Gr&#252;ssing</td>
			<td>N/A</td>
			<td>99%</td>
		</tr>
		<tr>
			<td>Filter block for filtration of max. 48 reaction mixtures</td>
			<td>In-house made</td>
			<td>N/A</td>
			<td>Technical drawings in the supplementary files</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Honeywell</td>
			<td>258148</td>
			<td>Conc. 37 %, p.a.</td>
		</tr>
		<tr>
			<td>Multiclaves with 24 individual Teflon inserts</td>
			<td>In-house made</td>
			<td>N/A</td>
			<td>Technical drawings in the supplementary files</td>
		</tr>
		<tr>
			<td>N,N &#8216;-piperazine bis(methylenephosphonic acid</td>
			<td>Prepared by coworkers</td>
			<td>N/A</td>
			<td>H4PMP,&#160; Prepared by coworkers with the method reported by Villemin et al.: D. Villemin, B. Moreau, A. Elbilali, M.-A. Didi, M.&#8217;h. Kaid, P.-A. Jaffr&#232;s, Phosphorus Sulfur Silicon Relat. Elem. 2010, 185, 2511.</td>
		</tr>
		<tr>
			<td>Sample Plate for PXRD</td>
			<td>In-house made</td>
			<td>N/A</td>
			<td>Technical drawings in the supplementary files</td>
		</tr>
		<tr>
			<td>Sodium hydroxide</td>
			<td>Gr&#252;ssing</td>
			<td>N/A</td>
			<td>99%</td>
		</tr>
		<tr>
			<td>Stoe Stadi P Combi</td>
			<td>STOE</td>
			<td>Stadi P Combi</td>
			<td>Cu-K&#945;1 radiation (&#955; = 1.5406 &#197;); transmission geometry; MYTHEN2 1K detector; opening angle 18&#176;; curved&#160; monochromator; xy-table</td>
		</tr>
		<tr>
			<td>Forced convection oven</td>
			<td>Memmert</td>
			<td>UFP400</td>
			<td></td>
		</tr>
	</tbody>
</table>

discovery and synthesis optimization of isoreticular al(iii) phosphonate-based metal-organic framework compounds using high-throughput methods

High-throughput (HT) methods are an important tool for the fast and efficient screening of synthesis parameters and the discovery of new materials. This manuscript describes the synthesis of metal-organic frameworks (MOFs) from solution using an HT reactor system, resulting in the discovery of various phosphonate-based MOFs of the composition [Al2H12-x(PMP)3]Clx&#8729;6H2O (H4PMP = N,N &#39;-piperazine bis(methylenephosphonic acid)) for x = 4, 6, denoted as Al-CAU-60-xHCl, containing trivalent aluminum ions. This was accomplished under solvothermal reaction conditions by systematically screening the impact of the molar ratio of the linker to the metal and the pH of the reaction mixture on the product formation. The protocol for the HT investigation includes six steps: a) synthesis planning (DOE = design of&#160;experiment) within the HT methodology, b) dosing and working with in-house developed HT reactors, c) solvothermal synthesis, d) synthesis workup using in-house developed filtration blocks, e) characterization by HT powder X-ray diffraction, and f) evaluation of the data. The HT methodology was first used to study the influence of acidity on the product formation, leading to the discovery of Al-CAU-60&#8729;xHCl (x = 4 or 6).

Author Spotlight: Accelerating Discovery in Microporous Material Chemistry 

Discovery and Synthesis Optimization of Isoreticular Al(III) Phosphonate-Based Metal-Organic Framework Compounds Using High-Throughput Methods

I see the periodic table as a huge playground, and in our research, we focus on the synthesis of new materials, porous materials, such as this here. That's a structural model, and we see holes in the framework. and that can be used to store molecules or also to separate molecules based on the size of these.And in addition to that kind of studies, we also develop new reactor systems in order to accelerate the discovery process. The current experimental challenges are to further accelerate the synthesis and characterization process with additional high throughput instrumentation, such as high throughput absorption characterization device. The lack of detail in publications regarding the synthesis and characterization procedure affecting reproducibility is a well-known problem in chemistry.By providing a thorough description of our method and setup, we aim to encourage other groups to adopt the described methodology, thereby increasing the reproducibility of experimental studies. We do not know what the future will bring since we work on the discovery of new materials, and we never know what kind of properties these materials will have. Nevertheless, I think that the use of linker molecules from renewable feedstocks will play a major role.And regarding the application, the use in sensing and the separation of gas molecules will be very important.

The PXRD data is shown in Figure 9. For the first evaluation, the results obtained are linked to the synthesis parameters of the investigated parameter space. The investigation was carried out using six different molar ratios of linker to metal and four different molar ratios of NaOH/HCl to Al3+. By linking this information with the obtained PXRD data (Figure 9), it can be seen that products of low crystallinity were obtained from syntheses at a molar...

Watch this Scientific Journal Video about Accelerating Discovery in Microporous Material Chemistry at JoVE.com

The targeted synthesis of new metal-organic frameworks (MOFs) is difficult, and their discovery depends on the knowledge and creativity of the chemist. High-throughput methods allow complex synthetic parameter fields to be explored quickly and efficiently, accelerating the process of finding crystalline compounds and identifying synthetic and structural trends.

High-throughput (HT) methods are an important tool for the fast and efficient screening of synthesis parameters and the discovery of new materials. This ...

discovery-synthesis-optimization-isoreticular-aliii-phosphonate-based

Research

JoVE Journal

Chemistry

2.3K 조회수.  Kiel University. 저는 주기율표를 거대한 놀이터로 보고 있으며, 우리 연구에서는 여기에서 이와 같은 새로운 물질, 다공성 물질의 합성에 중점을 둡니다. 그것은 구조적 모델이며, 우리는 프레임 워크에 구멍이 있습니다. 분자를 저장하거나 이들의 크기에 따라 분자를 분리하는 데 사용할 수 있습니다.그리고 그런 종류의 연구 외에도 우리는 발견 과정을 가속화하기 위해 새로운 원자?...