I would like to thank Dr. Simone Gomes Ferreira (Microtomography Laboratory, University of Sao Paulo, Brazil) and Dr. Greg Lin (Center for Nanoscale Systems, Harvard University, USA) for their paramount help and indispensable user training for different microtomography systems and data analysis software. I also thank the staff at the EEB Greenhouse at the University of Connecticut (USA), especially Clinton Morse and Matthew Opel for providing the specimens of Viscum minimum. Dr. John Wenzel provided the opportunity and great help for the sampling of Pyrularia pubera. MSc. Carolina Bastos, MSc. Yasmin Hirao, and Talitha Motta greatly helped with the sampling of Scybalium fungiforme. MSc. Ariadne Furtado, and Drs. Fernanda Oliveira and Maria Aline Neves provided the reference for the use of phloxine B for the analysis of endophytic fungi. Video recording at the Vrije Universiteit Brussel was made possible through the help of Dr. Philippe Claeys, Dr. Christophe Snoeck, MSc. Jake Griffith, Dr. Barabara Veselka, and Dr. Harry Olde Venterink.&#160;Funding was provided by the Coordination for the Improvement of Higher Education Personnel (CAPES, Brazil) and the Harvard University Herbaria (USA).

1. Parasitic plant sample selection
<ol>
	<li>Collect the entire parasitic plant haustorium, including the attached host stem/root and segments of both proximal and distal ends of the parasitized host organ; the ideal length of each segment is equivalent to double the diameter of the haustorium. 
	NOTE: For lateral haustoria, include part of the parasite mother stem/root from which the haustorium was formed (Figure 1A,B,D). For endoparasites, collect a segment of the host stem/root in which signs of the parasite are visible (Figure 1B). In the case of terminal connections, the whole plant should be collected (Figure 1E).</li>
	<li>Submerge the whole sample in fixative solution (e.g., FAA) in a volumetric proportion of 1:10 (sample: fixative). Leave samples in fixative for at least 1 day, depending on the size of the sample27. 
	&#8203;NOTE: Samples can be stored in fixative before scanning or be transferred to a preserving solution (e.g., ethanol 70%). Fresh samples can also be used if the subsequent anatomical analysis is not warranted (see Discussion section). If working with fresh material, set up the apparatus for perfusion of the contrast solution, then collect the sample. The sample should not be allowed to dry out.</li>
</ol>
2. Application of contrasting solutions
<ol>
	<li>Chose the application method to be used. Use the vacuum method (step 2.3) for small (Figure 1A) or non-woody (Figure 1B) samples. Use the perfusion method for larger samples, provided it includes a segment of the host stem/root is (Figure 1A,C-E).</li>
	<li>Wear rubber gloves and other appropriate personal protection equipment (e.g., laboratory coat) when manipulating the sample regardless of the approach chosen in the following steps. 
	CAUTION: All contrasting solutions include heavy metal salts in their composition, and therefore should not be handled without adequate personal protection equipment and under a fume hood.</li>
	<li>For the vacuum method, follow the steps mentioned below.
	<ol>
		<li>Choose an appropriate vial and label it. The vial must be large enough to accommodate the sample and the contrasting solution, usually in a proportion of 1:10. Check instructions from the manufacturer to ensure that the vial can withstand low to moderate vacuum. 
		NOTE: Do not fill the vial to the brim, as the negative pressure (vacuum) can cause the liquid to spill.</li>
		<li>Place the sample in the vial with the contrasting solution (1% iodine or 3% phosphotungstate, see Table of Materials). Then place the vial in a vacuum chamber or desiccator connected to a vacuum pump. Remove the lid from the vial, then close the vacuum chamber or desiccator.</li>
		<li>Check that there are no cracks on the vacuum chamber/desiccator and that the vacuum pump has enough oil.</li>
		<li>Close the exhaustion valve of the pump to prevent air from scaping and open the exhaustion valve of the chamber/desiccator to force the air out.</li>
		<li>Turn on the pump and wait until the pressure reaches approximately 20&#34; Hg. 
		CAUTION: This process is usually fast, so do not leave the vacuum system unattended. 
		NOTE: While the metric system unit for pressure is Pascal (Pa), pressure gauges in most laboratory vacuum pumps display pressure in inches of mercury (&#34;Hg), pound per square inch (psi), or bars. 20&#34; Hg equals ca. 67.7 Pa, 10 psi, or 0.7 bar.</li>
		<li>Close the chamber/desiccator exhaust valve to prevent air from re-entering, then quickly turn off the pump.</li>
		<li>Leave the sample under vacuum for at least 2 h; larger samples require longer for the contrasting solution to penetrate it.</li>
		<li>After the desired period, remove the sample from the contrasting solution to prepare it for scanning.</li>
		<li>Slowly open the chamber/desiccator exhaustion valve to allow air to enter it.</li>
		<li>Wait for the pressure in the chamber/desiccator to be fully exhausted (i.e., pressure gauge reaches near 0), then carefully open it to retrieve the sample.</li>
		<li>Discard the contrasting solution appropriately and keep the sample in preparation for scanning.</li>
	</ol>
	</li>
	<li>For the perfusion method, follow the steps mentioned below.
	<ol>
		<li>Select a supply tank for the contrasting solution according to the size of the sample. Use a 50 mL syringe (with no needle or plunger) for small samples (Figure 2A) or a 1 L intravenous medical kit for large samples (Figure 2B).</li>
		<li>Connect one end of a transparent plastic tubing (see Table of Materials) to the supply tank, then connect the other end to a two-way or three-way valve. Connect a second tubing to a different outlet in the valve (Figure 2A,B).</li>
		<li>Secure the supply tank at an elevated position without disassembling the apparatus set up in the previous step. 
		NOTE: The vertical distance between the tank and the sample will dictate the solution perfusion pressure (Figure 2B). A distance of 20-50 cm is enough for small samples. For large samples, a distance of 1 m is more adequate.</li>
		<li>Close the three-way (Figure 2C) or two-way (Figure 2D) valve to prevent liquid from exiting the tubing system, then pour the contrasting solution into the supply tank. If using an intravenous medical kit, fill the bag with the solution and close the valve before securing the apparatus at an elevated position.</li>
		<li>Ensure that no large air bubbles are formed along the tubing system (Figure 2E). If necessary, allow the contrast solution to flow out of the tubing until the bubble is removed. Close the valve again and leave the apparatus in place.</li>
		<li>To prepare the sample for perfusion of the contrast solution, keep it submerged in liquid (water, ethanol, or fixative) and cut off the tip of the proximal end of the host stem/root in the sample (Figure 2F).</li>
		<li>Remove the sample from the liquid in which it was stored and wrap it in a paraffin film to avoid desiccation. Keep the sample nearby and ready to be connected to the apparatus.</li>
		<li>Carefully open the valve to allow the contrasting solution to flow slowly and fill the plastic tubing connected to the tank while holding the open end of the system at a slightly elevated position to prevent the contrasting solution from spilling. Again, ensure that no large air bubbles form along the tube.</li>
		<li>Connect the proximal end of the host stem/root in the sample to the open end of the tubing system (Figure 2B, magnified region). Avoid introducing air bubbles into the system during this step. If necessary, disconnect the sample from the apparatus and remove air bubbles from the system by allowing the solution to flow.</li>
		<li>While keeping the sample connected to the apparatus, place it inside a container to avoid leakage of the contrasting solution into the area where the experiment was set up. Use tubes of different diameters, plastic zip-ties, and valve adaptors (Figure 2G) to ensure all connections in the apparatus are well-fit, accommodate host branches of various sizes, and that the solution is not leaking out of the tubing system (Figure 2B, magnified region).</li>
		<li>Let the solution perfuse the sample for at least 2 h, or until the solution accumulates inside the container.</li>
		<li>Close the valve and carefully disconnect the sample from the apparatus. Drain the remainder of the solution into the container and dispose of it appropriately.</li>
		<li>Remove the paraffin film from the sample in preparation for scanning.</li>
	</ol>
	</li>
</ol>
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/63423/63423fig02.jpg" /> 
Figure 2: Perfusion approach for contrast application. Small (A) and large (B) versions of the perfusion apparatus include a supply tank (st) and two plastic tubes (t1 and t2) connected by a valve (va). The proximal end of the host stem (H) bearing a parasite (P) attached to it via the haustorium (ha) is connected to the open end of the system (B, expanded). A three-way (C) or a two-way (D) valve is used to help prevent the formation of air bubbles inside the tubing system, which block the passage of contrasting solution (E). The tip of the proximal end of the host stem (H) is cut underwater to allow passage of the contrast solution (F). Zip-ties, valve adaptors, and tubing of different diameters help secure tighter connections and avoid leakage in the system (G). Figures 2B, D and F were created with BioRender. Scale bars = 2 cm. <a href="https://www.jove.com/files/ftp_upload/63423/63423fig02large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
3. Sample preparation and mounting
<ol>
	<li>Wash the sample by submerging it in water for 2 min. 
	CAUTION: Do not wash samples in the sink, as all contrasting solutions include heavy metal salts in their composition. Consider the water used for washing as a diluted contrasting solution and dispose of it appropriately.</li>
	<li>Place the sample in a paper towel at room temperature to allow excess water to evaporate for 2-5 min depending on the size of the sample. Alternatively, dry the sample slightly with the aid of a paper towel. Do not allow the sample to dry out completely.</li>
	<li>Wrap the sample in a paraffin film by stretching it to a thin layer. Avoid folding the paraffin film on top of the sample.</li>
	<li>Mount the wrapped sample onto a sample holder, keeping it stable and in position while it rotates&#160;during the scanning. Use adhesive tape, low-density foam, pipette tips, and/or clear plastic containers to secure the sample in place.</li>
	<li>Scan the sample and analyze the images following specific protocols and guidelines established for the micro-CT system available.</li>
</ol>

<ol>
	<li>Stock, S. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Microcomputed tomography: Methodology and applications. , (2020).</li><li>Hounsfield, G. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computerized+transverse+axial+scanning+(tomography):+I.+Description+of+system.">Computerized transverse axial scanning (tomography): I. Description of system.</a> British Journal of Radiology. 46 (552), 1016-1022 (1973).</li><li>Dutilleul, P., Lafond, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Editorial:+Branching+and+rooting+out+with+a+CT+Scanner:+The+why,+the+how,+and+the+outcomes,+present+and+possibly+future+pierre.">Editorial: Branching and rooting out with a CT Scanner: The why, the how, and the outcomes, present and possibly future pierre.</a> Frontiers in Plant Science. 7 (41), 5-6 (2016).</li><li>Metscher, B. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biological+applications+of+X-ray+microtomography:+Imaging+micro-+anatomy,+molecular+expression+and+organismal+diversity.">Biological applications of X-ray microtomography: Imaging micro- anatomy, molecular expression and organismal diversity.</a> Microscopy and Analysis. 27 (2), 13-16 (2013).</li><li>Sakdinawat, A., Attwood, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoscale+X-ray+imaging.">Nanoscale X-ray imaging.</a> Nature Photonics. 4 (12), 840-848 (2010).</li><li>Walton, L. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Morphological+characterisation+of+unstained+and+intact+tissue+micro-architecture+by+X-ray+computed+micro-+and+nano-tomography.">Morphological characterisation of unstained and intact tissue micro-architecture by X-ray computed micro- and nano-tomography.</a> Scientific Reports. 5, 1-14 (2015).</li><li>Lafond, J. A., Han, L., Dutilleul, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Concepts+and+analyses+in+the+ct+scanning+of+root+systems+and+leaf+canopies:+A+timely+summary.">Concepts and analyses in the ct scanning of root systems and leaf canopies: A timely summary.</a> Frontiers in Plant Science. 6 (1111), 85-91 (2015).</li><li>Staedler, Y. M., Masson, D., Sch&#246;nenberger, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Plant+tissues+in+3D+via+X-Ray+Tomography:+Simple+contrasting+methods+allow+high+resolution+imaging.">Plant tissues in 3D via X-Ray Tomography: Simple contrasting methods allow high resolution imaging.</a> PLoS ONE. 8 (9), 75295 (2013).</li><li>Heeraman, D. A., Hopmans, J. W., Clausnitzer, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three+dimensional+imaging+of+plant+roots+in+situ+with+X-ray+Computed+Tomography.">Three dimensional imaging of plant roots in situ with X-ray Computed Tomography.</a> Plant and Soil. 189, 167-179 (1997).</li><li>Dhondt, S., Vanhaeren, H., Van Loo, D., Cnudde, V., Inz&#233;, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Plant+structure+visualization+by+high-resolution+X-ray+computed+tomography.">Plant structure visualization by high-resolution X-ray computed tomography.</a> Trends in Plant Science. 15 (8), 419-422 (2010).</li><li>McElrone, A. J., Choat, B., Parkinson, D. Y., MacDowell, A. A., Brodersen, C. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Using+high+resolution+computed+tomography+to+visualize+the+three+dimensional+structure+and+function+of+plant+vasculature.">Using high resolution computed tomography to visualize the three dimensional structure and function of plant vasculature.</a> Journal of Visualized Experiments. (74), e50162 (2013).</li><li>Cochard, H., Delzon, S., Badel, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=X-ray+microtomography+(micro-CT):+A+reference+technology+for+high-resolution+quantification+of+xylem+embolism+in+trees.">X-ray microtomography (micro-CT): A reference technology for high-resolution quantification of xylem embolism in trees.</a> Plant, Cell and Environment. 38 (1), 201-206 (2015).</li><li>Bastos, C. L., Tamaio, N., Angyalossy, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Unravelling+roots+of+lianas:+A+case+study+in+Sapindaceae.">Unravelling roots of lianas: A case study in Sapindaceae.</a> Annals of Botany. 118 (4), 733-746 (2016).</li><li>da Cunha Neto, I. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diversity,+distribution,+development,+and+evolution+of+medullary+bundles+in+Nyctaginaceae.">Diversity, distribution, development, and evolution of medullary bundles in Nyctaginaceae.</a> American Journal of Botany. 107 (5), 707-725 (2020).</li><li>Milien, M., Renault-Spilmont, A. S., Cookson, S. J., Sarrazin, A., Verdeil, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+the+3D+structure+of+the+graft+union+of+grapevine+using+X-ray+tomography.">Visualization of the 3D structure of the graft union of grapevine using X-ray tomography.</a> Scientia Horticulturae. 144, 130-140 (2012).</li><li>Paya, A. M., Silverberg, J. L., Padgett, J., Bauerle, T. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=X-ray+computed+tomography+uncovers+root-root+interactions:+Quantifying+spatial+relationships+between+interacting+root+systems+in+three+dimensions.">X-ray computed tomography uncovers root-root interactions: Quantifying spatial relationships between interacting root systems in three dimensions.</a> Frontiers in Plant Science. 6 (274), 54-65 (2015).</li><li>Teixeira-Costa, L., Ceccantini, G. C. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aligning+microtomography+analysis+with+traditional+anatomy+for+a+3D+understanding+of+the+host-parasite+interface+-+Phoradendron+spp.+Case+study.">Aligning microtomography analysis with traditional anatomy for a 3D understanding of the host-parasite interface - Phoradendron spp. Case study.</a> Frontiers in Plant Science. 7, 1340 (2016).</li><li>Lusic, H., Grinstaff, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=X-ray-computed+tomography+contrast+agents.">X-ray-computed tomography contrast agents.</a> Chemical Reviews. 113 (3), 1641-1666 (2013).</li><li>T&#283;&#353;itel, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+biology+of+parasitic+plants:+a+review.">Functional biology of parasitic plants: a review.</a> Plant Ecology and Evolution. 149 (1), 5-20 (2016).</li><li>Teixeira-Costa, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+living+bridge+between+two+enemies:+Haustorium+structure+and+evolution+across+parasitic+flowering+plants.">A living bridge between two enemies: Haustorium structure and evolution across parasitic flowering plants.</a> Revista Brasileira de Botanica. 44 (1), 165-178 (2021).</li><li>Kuijt, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The Biology of Parasitic Flowering Plants. , (1969).</li><li>Masumoto, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+reconstructions+of+haustoria+in+two+parasitic+plant+species+in+the+Orobanchaceae.">Three-dimensional reconstructions of haustoria in two parasitic plant species in the Orobanchaceae.</a> Plant Physiology. 185 (4), 1429-1442 (2021).</li><li>Calo, C. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+correlation+analysis+of+Light+Microscopy+and+X-ray+MicroCT+imaging+methods+applied+to+archaeological+plant+remains'+morphological+attributes+visualization.">A correlation analysis of Light Microscopy and X-ray MicroCT imaging methods applied to archaeological plant remains' morphological attributes visualization.</a> Scientific Reports. 10 (1), 1-15 (2020).</li><li>Brodersen, C. R., Roddy, A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+frontiers+in+the+three-dimensional+visualization+of+plant+structure+and+function.">New frontiers in the three-dimensional visualization of plant structure and function.</a> American Journal of Botany. 103 (2), 184-188 (2016).</li><li>Teixeira-Costa, L., Davis, C. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Life+history,+diversity,+and+distribution+in+parasitic+flowering+plants.">Life history, diversity, and distribution in parasitic flowering plants.</a> Plant Physiology. 187 (1), 32-51 (2021).</li><li>Simpson, B. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Krameriaceae.">Krameriaceae.</a> Flora Neotropica Monograph. 49, (1989).</li><li>Ruzin, S. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Plant microtechnique and microscopy. , (1999).</li><li>Nikolov, L. A., Tomlinson, P. B., Manickam, S., Endress, P. K., Kramer, E. M., Davis, C. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Holoparasitic+Rafflesiaceae+possess+the+most+reduced+endophytes+and+yet+give+rise+to+the+world's+largest+flowers.">Holoparasitic Rafflesiaceae possess the most reduced endophytes and yet give rise to the world's largest flowers.</a> Annals of Botany. 114, 233-242 (2014).</li><li>Thorogood, C. J., Teixeira-Costa, L., Ceccantini, G., Davis, C., Hiscock, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endoparasitic+plants+and+fungi+show+evolutionary+convergence+across+phylogenetic+divisions.">Endoparasitic plants and fungi show evolutionary convergence across phylogenetic divisions.</a> New Phytologist. 232 (3), 1159-1167 (2021).</li><li>Largent, D., Johnson, D., Watling, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> How to Identify Mushrooms to Genus III: Microscopic Features. , (1977).</li><li>Busse, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+virtual+histology+enabled+through+cytoplasm-specific+X-ray+stain+for+microscopic+and+nanoscopic+computed+tomography.">Three-dimensional virtual histology enabled through cytoplasm-specific X-ray stain for microscopic and nanoscopic computed tomography.</a> Proceedings of the National Academy of Sciences of the United States of America. 115 (10), 2293-2298 (2018).</li><li>Sperry, J. S., Donnelly, J. R., Tyree, M. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+method+for+measuring+hydraulic+conductivity+and+embolism+in+xylem.">A method for measuring hydraulic conductivity and embolism in xylem.</a> Plant, Cell and Environment. 11, 35-40 (1988).</li><li>Calvin, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Host-formed+tyloses+in+vessels+of+the+mistletoe+Phoradendron+(Viscaceae).">Host-formed tyloses in vessels of the mistletoe Phoradendron (Viscaceae).</a> IAWA Journal. 18 (2), 117-126 (1997).</li><li>Teixeira-Costa, L., Ceccantini, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Embolism+increase+and+anatomical+modifications+caused+by+a+parasitic+plant.">Embolism increase and anatomical modifications caused by a parasitic plant.</a> IAWA Journal. 36 (2), 138-151 (2015).</li><li>Ellmore, G. S., Ewers, F. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluid+flow+in+the+outermost+xylem+increment+of+a+ring-porous+tree,+Ulmus+americana.">Fluid flow in the outermost xylem increment of a ring-porous tree, Ulmus americana.</a> American Journal of Botany. 73 (12), 1771-1774 (1986).</li><li>Ellis, E. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Staining+sectioned+biological+specimens+for+transmission+electron+microscopy:+Conventional+and+En+bloc+stains.">Staining sectioned biological specimens for transmission electron microscopy: Conventional and En bloc stains.</a> Electron Microscopy: Methods and Protocols. 1117, 57-72 (2014).</li><li>Brodersen, C. R., McElrone, A. J., Choat, B., Matthews, M. A., Shackel, K. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+dynamics+of+embolism+repair+in+xylem:+In+vivo+visualizations+using+high-resolution+computed+tomography.">The dynamics of embolism repair in xylem: In vivo visualizations using high-resolution computed tomography.</a> Plant Physiology. 154 (3), 1088-1095 (2010).</li><li>Brodersen, C. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Automated+analysis+of+three-dimensional+xylem+networks+using+high-resolution+computed+tomography.">Automated analysis of three-dimensional xylem networks using high-resolution computed tomography.</a> New Phytologist. 191 (4), 1168-1179 (2011).</li><li>Lee, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualizing+plant+development+and+gene+expression+in+three+dimensions+using+optical+projection+tomography.">Visualizing plant development and gene expression in three dimensions using optical projection tomography.</a> Plant Cell. 18 (9), 2145-2156 (2006).</li></ol>

The author has nothing to disclose.

The use of heavy metal solutions to improve plant tissue contrast has become a crucial step in sample preparation for micro-CT analysis. Several compounds commonly available in plant micro-morphology laboratories have been tested by Staedler et al., who recommend using phosphotungstate as the most effective agent in penetrating samples and increasing contrast index8. Results obtained here in the analysis of the haustorium of P. pubera corroborate this recommendation. In terms of contrast ...

High-resolution x-ray microcomputed tomography (micro-CT) is an imaging method in which multiple radiographs (projections) of a sample are recorded from different viewing angles and later used to provide a virtual reconstruction of the sample1. This virtual object can then be analyzed, manipulated, and segmented, allowing non-destructive exploration in three dimensions2. Initially designed for medical analyses and later for industrial applications, micro-CT also offers the advantage of visualizing inner organs and tissues without the need for invasive procedures3. Like other forms of imaging, micro-CT works with a trade-off between the field of view and pixel size, which means that high-resolution imaging of large samples is nearly unattainable4. Advances in using high-energy X-ray sources (i.e., synchrotron) and secondary optical magnification are constantly being made, allowing the smallest resolution to reach under 100 nm5,6. Nevertheless, longer scanning times are necessary for large samples, increasing the chance of artifacts due to sample movement or deformation inside the scanner. Furthermore, micro-CT is generally limited by natural density variations within the sample and how the sample interacts with X-rays. While a higher X-ray dose is best for penetrating denser samples, it is less efficient in capturing variations in density within and between the sample and its surrounding medium7. On the other hand, a lower X-ray dose offers less penetration power and often requires longer scanning times but more sensitivity in density detection7.
These restrictions have long hampered the use of microtomography for plant sciences, given that most plant tissues are composed of light (non-dense) tissue with low X-ray absorption8. The first applications of micro-CT were focused on mapping root networks within the soil matrix9,10. Later, plant structures with more significant differences in tissue density, such as wood, began to be explored. This has allowed investigations of xylem functionality11,12, development of complex tissue organizations13,14, and interactions among plants15,16,17. The analysis of soft and homogeneous tissue is becoming widespread due to contrast agents, which are now standard procedure&#160;in preparations for micro-CT scanning of plant samples. However, protocols for contrast introduction can have different results depending on sample volume, structural properties, and the type of solution used8. Ideally, the contrast agent should enhance distinction among different tissues, enable tissue/organ functionality evaluation, and/or provide biochemical information about a tissue18. Therefore, adequate sample treatment, preparation, and mounting before scanning become crucial for any micro-CT analysis.
Micro-CT of the parasitic plant haustorium 
Parasitic flowering plants represent a distinct functional group of angiosperms characterized by an organ known as haustorium19. This multicellular organ, a developmental hybrid between a modified stem and a root, acts on the host&#39;s attachment, penetration, and contact by a parasite20. For this reason, the haustorium is considered to &#34;embody the very idea of parasitism among plants&#34;21. A detailed understanding of this organ&#39;s development, structure, and functioning is crucial for parasitic plant ecology, evolution, and management studies. Nevertheless, parasitic plants&#39; overall complexity and highly modified structure and haustoria often hinder detailed analysis and comparison. Haustorium connections are also usually extensive and not homogenous in tissue and cell distribution (Figure 1). In this context, while working with small tissue fragments allows easier manipulation and higher resolution, it can lead to erroneous conclusions about the three-dimensional architecture of complex structures, such as the parasitic plant haustorium.
Although there is a vast literature on haustorium anatomy and ultrastructure for most parasitic plant species, the three-dimensional organization and the spatial relationship between parasite and host tissues remains poorly explored17. In a recent work by Masumoto et al.22, over 300 serial semi-thin microtome sections were imaged and reconstructed into a three-dimensional virtual object representing the haustorium of two parasite species. This method&#39;s excellent level of detail provides unprecedented insights into the haustorium&#39;s cellular and anatomical 3-D structure. However, such a time-consuming technique would forbid a similar analysis in parasites with more extensive haustorium connections. The use of micro-CT emerges as an excellent tool for three-dimensional analysis of complex and often bulky haustoria of parasitic plants. Although not a substitute for detailed anatomical sectioning and other complementary forms of microscopy analyses17,23, results obtained via micro-CT scanning, especially for large samples, can also serve as a guide to direct the sub-sampling of smaller segments, which can then be analyzed using other tools, such as confocal and electron microscopy, or re-analyzed with high-resolution micro-CT systems.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/63423/63423fig01.jpg" /> 
Figure 1: Parasitic plants of different functional groups used in this protocol. Euphytoid parasite Pyrularia pubera (A), endoparasite Viscum minimum (B) with green fruits (dashed black circle), parasitic vine Cuscuta americana (C), mistletoe Struthanthus martianus (D), obligate root parasite Scybalium fungiforme (E). Segments of the host root (Hr) or stem (Hs) facilitate the application of contrast into the parasite haustorium (P). The presence of parasite mother root/stem (arrows) in the sample allows analysis of haustorium vessel organization. Rectangles indicate segments of the sample used for analysis. Scale bars = 2 cm. <a href="https://www.jove.com/files/ftp_upload/63423/63423fig01large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
As micro-CT becomes an increasingly popular technique in plant sciences, there are guides, protocols, and literature dealing with sample scanning, three-dimensional reconstruction, segmentation, and analysis3,10,24. Thus, these steps will not be discussed here. As with any imagining technique, appropriate treatment and mounting of samples are a fundamental, albeit often being an overlooked procedure. For this reason, this protocol focuses on the preparation of haustorium samples for micro-CT scanning. More specifically, this protocol describes two approaches for introducing contrast agents into haustorium samples to improve visualization of different tissues and cell types in the haustorium, to facilitate the detection of parasitic tissue within the host root/stem, and&#160;to analyze parasite-host vascular connections in three dimensions. The preparations described here can also be adapted to the analysis of other plant structures.
Five species were used to better illustrate the convenience of the protocol described here. Each species represents one of the five functional groups of parasitic flowering plants, thus addressing specific points related to the functionality of each group. Pyrularia pubera (Santalaceae) was chosen to represent euphytoid parasites, which germinate in the ground and form multiple haustoria that connect the parasite to the roots of its hosts25. The haustoria created by these plants are often tenuous and easily torn apart from the host26 (Figure 1A), thus requiring a more delicate handling process. Endoparasites are represented here by Viscum minimum (Viscaceae). Species in this functional group are only visible outside the body of their hosts for short periods (Figure 1B) and live most of their life cycles as significantly reduced and mycelial-like strands of cells embedded within host tissues25. A third functional group comprises parasitic vines, which germinate on the ground but form only rudimentary roots, relying on multiple haustoria that attach to the stems of host plants25 (Figure 1C). Here, this functional group is represented by Cuscuta americana (Convolvulaceae). Contrary to parasitic vines, mistletoes germinate directly upon the branches of their host plants and develop either multiple or solitary haustoria25. The species chosen to illustrate this functional group is Struthanthus martianus (Loranthaceae), which forms various connections with the host branch (Figure 1D). Analysis of solitary mistletoe haustoria using a combination of micro-CT and light microscopy can be found in Teixeira-Costa &#38; Ceccantini17. Finally, obligate root parasites comprise species that germinate on the ground and penetrate the roots of host plants, upon which they are entirely dependent from the earliest growth stages25. These plants are represented here by Scybalium fungiforme (Balanophoraceae), which produce large tuber-like haustoria (Figure 1E).
All plant samples used in this protocol were fixed in a 70% formalin acetic acid alcohol (FAA 70). The fixation upon sampling is crucial for preserving plant tissues, especially if subsequent anatomical analyses are needed. In the case of parasitic plant haustorium, fixation is also essential, as this organ is often primarily composed of non-lignified parenchyma cells20. Detailed protocols for plant tissue fixation, including the preparation of fixative solutions, can be found elsewhere27. On the other hand, to a greater or lesser degree, fixatives can cause alterations of a sample&#39;s physical and chemical properties, rendering it unsuitable for specific biomechanical and histochemical analyses. Thus, fresh samples, i.e., non-fixated material collected immediately before preparation, can also be used with this protocol. Details on how to handle fresh samples and troubleshooting suggestions for fixated material are provided in the discussion section.

<table><tbody><tr><td>3D X-ray microscope (XRM) system</td><td></td><td>Zeiss Versa 620</td><td>used to scan &lt;em&gt;Pyrularia pubera&lt;/em&gt;</td></tr><tr><td>3D X-ray microscope + A2:D22</td><td>Zeiss</td><td>Versa 620</td><td>Used for scanning the species &lt;em&gt;P. pubera&lt;/em&gt;</td></tr><tr><td>CT-Pro 3D software</td><td>Nikon</td><td>version XT 3.1.11</td><td>Used for three-dimensional reconstruction of scans</td></tr><tr><td>CT-Vox software</td><td>Bruker</td><td>version 3.3.1</td><td>Used for analyses and acquisition of images and videos</td></tr><tr><td>Dragonfly software</td><td>Object Research Systems - ORS</td><td>version</td><td>Used for analyses and acquisition of images and videos</td></tr><tr><td>Glass vials</td><td>Glass Vials Inc. SE</td><td>V2708C-FM-SP</td><td>Sold by VWR - USA; make sure that vials are able to withstand vacuum at ca. 10 psi</td></tr><tr><td>Inspect-X</td><td>Zeiss</td><td>version XT 3.1.11</td><td>Used for controlling the Nikon X-Tek HMXST225 system</td></tr><tr><td>Iodine solution 0.0282 N</td><td>WR Chemicals BDH</td><td>BDH7422-1</td><td>Sold by VWR - USA</td></tr><tr><td>Lead Nitrate II PA 500 g</td><td>Vetec</td><td>361.08</td><td>Sold by SPLab</td></tr><tr><td>Microtomography scanner</td><td>Bruker</td><td>Skyscan1176</td><td>Used for scanning the species &lt;em&gt;C. americana&lt;/em&gt;, &lt;em&gt;S. martianus&lt;/em&gt;, and &lt;em&gt;S. fungiforme&lt;/em&gt;</td></tr><tr><td>Microtomography scanner</td><td>Nikon</td><td>X-Tek HMXST225</td><td>Used for scanning the species &lt;em&gt;V. minimum&lt;/em&gt;</td></tr><tr><td>NRecon software</td><td>Bruker</td><td>version 1.0.0</td><td>Used for three-dimensional reconstruction</td></tr><tr><td>Phosphotungstic acid hydrate 3% in aqueous solution</td><td>Electron Microscopy Sciences</td><td>101410-756</td><td>Sold by VWR - USA</td></tr><tr><td>Plastic film (Parafilm)</td><td>Heathrow Scientific</td><td>PM996</td><td>Sold by VWR - USA</td></tr><tr><td>Plastic IV bag 500 mL</td><td>Taylor</td><td>3478</td><td>Sold by Fibra Cirurgica Produtos para Saude</td></tr><tr><td>PVC tubing 3/4&#039;&#039;</td><td>Nalge Nunc International</td><td>SC63013-164</td><td>Sold by VWR - USA</td></tr><tr><td>Scanning system</td><td></td><td>Nikon X-Tek HMXST225</td><td>used to scan &lt;em&gt;Viscum minimum&lt;/em&gt;</td></tr><tr><td>Scanning system</td><td></td><td>Bruker Skyscan 1176</td><td>used to scan &lt;em&gt;C. americana&lt;/em&gt;</td></tr><tr><td>Scout-and-ScanTM software</td><td>Zeiss</td><td>version 16</td><td>Used for controlling the Zeiss Versa 620 system and for three-dimensional reconstruction of scans</td></tr><tr><td>Three-way valve</td><td>ToToT</td><td>DMTWVS-5</td><td>Sold by Amazon USA</td></tr><tr><td>Two-part syringe</td><td>HSW Henke-Ject</td><td>4850001000</td><td>Used without the plunger</td></tr><tr><td>Vacuum chamber</td><td>Binder</td><td>80080-434</td><td>Sold by VWR - USA; includes pump and connecting tubes</td></tr><tr><td>VG Studio Max software</td><td>Volume Graphics</td><td>version 3.0</td><td>Used for analyses and acquisition of images and videos</td></tr></tbody></table>

leveraging micro-ct scanning to analyze parasitic plant-host interactions

Micro-CT scanning has become an established tool in investigating plant structure and function. Its non-destructive nature, combined with the possibility of three-dimensional visualization and virtual sectioning, has allowed novel and increasingly detailed analysis of complex plant organs. Interactions among plants, including between parasitic plants and their hosts, can also be explored. However, sample preparation before scanning becomes crucial due to the interaction between these plants, which often differ in tissue organization and composition. Furthermore, the broad diversity of parasitic flowering plants, ranging from highly reduced vegetative bodies to trees, herbs, and shrubs, must be considered during the sampling, treatment, and preparation of parasite-host material. Here two different approaches are described for introducing contrast solutions into the parasite and/or host plants, focusing on analyzing the haustorium. This organ promotes connection and communication between the two plants. Following a simple approach, details of haustorium tissue organization can be explored three-dimensionally, as shown here for&#160;euphytoid, vine, and mistletoe parasitic species. Selecting specific contrasting agents and application approaches also allow detailed observation of endoparasite spread within the host body and detection of direct vessel-to-vessel connection between parasite and host, as shown here for an obligate root parasite. Thus, the protocol discussed here can be applied to the broad diversity of parasitic flowering plants to advance the understanding of their development, structure, and functioning.

The haustorium of parasitic plants is a complex organ comprising different tissues and cell types that intertwine and connect with the tissues of another plant, used as a host20. Micro-CT scanning can be leveraged to better understand this complex structure in a non-destructive and three-dimensional way when analyzing both small (Figure 1A-C) and large (Figure 1D,E) haustoria. To do ...

Watch this Scientific Journal Video about Leveraging Micro-CT Scanning to Analyze Parasitic Plant-Host Interactions at JoVE.com

Leveraging Micro-CT Scanning to Analyze Parasitic Plant-Host Interactions

Micro-CT is a non-destructive tool that can analyze plant structures in three dimensions. The present protocol describes the sample preparation to leverage micro-CT to analyze parasitic plant structure and function. Different species are used to highlight the advantages of this method when coupled with specific preparations.

Micro-CT scanning has become an established tool in investigating plant structure and function. Its non-destructive nature, combined with the possibility ...

leveraging-micro-ct-scanning-to-analyze-parasitic-plant-host

Research

JoVE Journal

Environment

1.8K Views.  Harvard University Herbaria. Dit protocol verbetert aanzienlijk het contrast tussen de weefsels van de parasitaire plant en de gastheer in monsters die zullen worden geanalyseerd met behulp van microtomografie. De hier beschreven techniek versnelt het proces van contrastperfusie door het monster, waardoor de analyse van specifieke weefsels en structuren gevormd tussen de parasitaire plant en de gastheer mogelijk is. De vacuümbenadering is zeer eenvoudig en zou geen problemen moeten opleveren.Het perfusieapparaat ...

Video: Leveraging Micro-CT Scanning to Analyze Parasitic Plant-Host Interactions

Application of Two-spotted Spider Mite Tetranychus urticae for Plant-pest Interaction Studies

The two-spotted spider mite, Tetranychus urticae, is a ubiquitous polyphagous arthropod herbivore that feeds on a remarkably broad array of species, with more than 150 of economic value. It is a major pest of greenhouse crops, especially in Solanaceae and Cucurbitaceae (e.g., tomatoes, eggplants, peppers, cucumbers, zucchini) and greenhouse ornamentals (e.g., roses, chrysanthemum, carnations), annual field crops (such as maize, cotton, soybean, and sugar beet), and in perennial cultures (alfalfa, strawberries, grapes, citruses, and plums)1,2. In addition to the extreme polyphagy that makes it an important agricultural pest, T. urticae has a tendency to develop resistance to a wide array of insecticides and acaricides that are used for its control3-7.
T. urticae is an excellent experimental organism, as it has a rapid life cycle (7 days at 27 &#176;C) and can be easily maintained at high density in the laboratory. Methods to assay gene expression (including in situ hybridization and antibody staining) and to inactivate expression of spider mite endogenous genes using RNA interference have been developed8-10. Recently, the whole genome sequence of T. urticae has been reported, creating an opportunity to develop this pest herbivore as a model organism with equivalent genomic resources that already exist in some of its host plants (Arabidopsis thaliana and the&#160;tomato Solanum lycopersicum)11. Together, these&#160;model organisms could provide insights into molecular bases of plant-pest interactions.
Here, an efficient method for quick and easy collection of a large number of adult female mites, their application on an experimental plant host, and the assessment of the plant damage due to spider mite feeding are described. The presented protocol enables fast and efficient collection of hundreds of individuals at any developmental stage (eggs, larvae, nymphs, adult males, and females) that can be used for subsequent experimental application.

Application of Two-spotted Spider Mite Tetranychus urticae for Plant-pest Interaction Studies

Protocols for efficient preparation of homogenous samples of spider mites, infestation of experimental plants, and assessment of plant damage, as required for studies of plant-pest interaction were developed.

The two-spotted spider mite, Tetranychus urticae, is a ubiquitous polyphagous arthropod herbivore that feeds on a remarkably broad array of species, with ...

Microfocus X-ray CT (microCT) Imaging of Actinia equina (Cnidaria), Harmothoe sp. (Annelida), and Xenoturbella japonica (Xenacoelomorpha)

Traditionally, biologists have had to rely on destructive methods such as sectioning in order to investigate the internal structures of opaque organisms. Non-destructive microfocus X-ray computed tomography (microCT) imaging has become a powerful and emerging protocol in biology, due to technological advancements in sample staining methods and innovations in microCT hardware, processing computers, and data analysis software. However, this protocol is not commonly used, as it is in the medical and industrial fields. One of the reasons for this limited use is the lack of a simple and comprehensible manual that covers all of the necessary steps: sample collection, fixation, staining, mounting, scanning, and data analyses. Another reason is the vast diversity of metazoans, particularly marine invertebrates. Because of marine invertebrates&#8217; diverse sizes, morphologies, and physiologies, it is crucial to adjust experimental conditions and hardware configurations at each step, depending on the sample. Here, microCT imaging methods are explained in detail using three phylogenetically diverse marine invertebrates: Actinia equina (Anthozoa, Cnidaria), Harmothoe sp. (Polychaeta, Annelida), and Xenoturbella japonica (Xenoturbellida, Xenacoelomorpha). Suggestions on performing microCT imaging on various animals are also provided.

Microfocus X-ray CT microCT Imaging of Actinia equina Cnidaria, Harmothoe sp. Annelida, and Xenoturbella japonica Xenacoelomorpha

Here, protocols for performing microfocus X-ray computed tomography (microCT) imaging of three marine invertebrate animals are explained in detail. This study describes steps such as sample fixation, staining, mounting, scanning, image reconstruction, and data analyses. Suggestions on how the protocol can be adjusted for different samples are also provided.

Traditionally, biologists have had to rely on destructive methods such as sectioning in order to investigate the internal structures of opaque organisms. ...

Investigation of Plant Interactions Across Common Mycorrhizal Networks Using Rotated Cores

Arbuscular mycorrhizal (AM) fungi influence plant mineral nutrient uptake and growth, hence, they have the potential to influence plant interactions. The power of their influence is in extraradical mycelia that spread beyond nutrient depletion zones found near roots to ultimately interconnect individuals within a common mycorrhizal network (CMN). Most experiments, however, have investigated the role of AM fungi in plant interactions by growing plants with versus without mycorrhizal fungi, a method that fails to explicitly address the role of CMNs. Here, we propose a method that manipulates CMNs to investigate their role in plant interactions. Our method uses modified containers with conical bottoms with a nylon mesh and/or hydrophobic material covering slotted openings, 15N fertilizer, and a nutrient-poor interstitial sand. CMNs are left either intact between interacting individuals, severed by rotation of containers, or prevented from forming by a solid barrier. Our findings suggest that rotating containers is sufficient to disrupt CMNs and prevent their effects on plant interactions across CMNs. Our approach is advantageous because it mimics aspects of nature, such as seedlings tapping into already established CMNs and the use of a suite of AM fungi that may provide diverse benefits. Although our experiment is limited to investigating plants at the seedling stage, plant interactions across CMNs can be detected using our approach which therefore can be applied to investigate biological questions about the functioning of CMNs in ecosystems.

Most plants within communities likely are interconnected by arbuscular mycorrhizal (AM) fungi, but mediation of plant interactions by them has been investigated primarily by growing plants with versus without mycorrhizas. We present a method to manipulate common mycorrhizal networks among mycorrhizal plants to investigate their consequences for plant interactions.

Arbuscular mycorrhizal (AM) fungi influence plant mineral nutrient uptake and growth, hence, they have the potential to influence plant interactions. The ...

Inoculation Strategies to Infect Plant Roots with Soil-Borne Microorganisms

The rhizosphere harbors a highly complex microbial community in which plant roots are constantly challenged. Roots are in close contact with a wide variety of microorganisms, but studies on soil-borne interactions are still behind those performed on aboveground organs. Although some inoculation strategies for infecting model plants with model root pathogens are described in the literature, it remains difficult to get a comprehensive methodological overview. To address this problem, three different root inoculation systems are precisely described that can be applied to gain insights into the biology of root-microbe interactions. For illustration, Verticillium species (namely, V. longisporum and V. dahliae) were employed as root invading model pathogens. However, the methods can be easily adapted to other root colonizing microbes - both pathogenic and beneficial. By colonizing the plant xylem, vascular soil-borne fungi such as Verticillium spp. exhibit a unique lifestyle. After root invasion, they spread via the xylem vessels acropetally, reach the shoot, and elicit disease symptoms. Three representative plant species were chosen as model hosts: Arabidopsis thaliana, economically important oilseed rape (Brassica napus), and tomato (Solanum lycopersicum). Step-by-step protocols are given. Representative results of pathogenicity assays, transcriptional analyses of marker genes, and independent confirmations by reporter constructs are shown. Furthermore, the advantages and disadvantages of each inoculation system are thoroughly discussed. These proven protocols can assist in providing approaches for research questions on root-microbe interactions. Knowing how plants cope with microbes in the soil is crucial for developing new strategies to improve agriculture.

This protocol presents a detailed summary of strategies to inoculate plant roots with soil-borne microbes. Exemplified for the fungi Verticillium longisporum and Verticillium dahliae, three different root infection systems are described. Potential applications and possible downstream analyses are highlighted, and advantages or disadvantages are discussed for each system.

The rhizosphere harbors a highly complex microbial community in which plant roots are constantly challenged. Roots are in close contact with a wide ...

Using Flatbed Scanners to Collect High-resolution Time-lapsed Images of the Arabidopsis Root Gravitropic Response

Research efforts in biology increasingly require use of methodologies that enable high-volume collection of high-resolution data. A challenge laboratories can face is the development and attainment of these methods. Observation of phenotypes in a process of interest is a typical objective of research labs studying gene function and this is often achieved through image capture. A particular process that is amenable to observation using imaging approaches is the corrective growth of a seedling root that has been displaced from alignment with the gravity vector. Imaging platforms used to measure the root gravitropic response can be expensive, relatively low in throughput, and/or labor intensive. These issues have been addressed by developing a high-throughput image capture method using inexpensive, yet high-resolution, flatbed scanners. Using this method, images can be captured every few minutes at 4,800 dpi. The current setup enables collection of 216 individual responses per day. The image data collected is of ample quality for image analysis applications.

This protocol describes a process for rapid collection of images of Arabidopsis seedlings responding to a gravity stimulus using commercially-available flatbed scanners. The method allows for inexpensive, high-volume capture of high-resolution images amenable for downstream analysis algorithms.

Research efforts in biology increasingly require use of methodologies that enable high-volume collection of high-resolution data. A challenge laboratories ...

Biology

Scanning Electron Microscopy (SEM) Protocols for Problematic Plant, Oomycete, and Fungal Samples

Common problems in the processing of biological samples for observations with the scanning electron microscope (SEM) include cell collapse, treatment of samples from wet microenvironments and cell destruction. Using young floral tissues, oomycete cysts, and fungi spores (Agaricales) as examples, specific protocols to process delicate samples are described here that overcome some of the main challenges in sample treatment for image capture under the SEM.
Floral meristems fixed with FAA (Formalin-Acetic-Alcohol) and processed with the Critical Point Dryer (CPD) did not display collapsed cellular walls or distorted organs. These results are crucial for the reconstruction of floral development. A similar CPD-based treatment of samples from wet microenvironments, such as the glutaraldehyde-fixed oomycete cysts, is optimal to test the differential growth of diagnostic characteristics (e.g., the cyst spines) on different types of substrates. Destruction of nurse cells attached to fungi spores was avoided after rehydration, dehydration, and the CPD treatment, an important step for further functional studies of these cells.
The protocols detailed here represent low-cost and rapid alternatives for the acquisition of good-quality images to reconstruct growth processes and to study diagnostic characteristics.

Scanning Electron Microscopy SEM Protocols for Problematic Plant, Oomycete, and Fungal Samples

Problems in the processing of biological samples for scanning electron microscopy observation include cell collapse, treatment of samples from wet microenvironments and cell destruction. Low-cost and relatively rapid protocols suited for preparing challenging samples such as floral meristems, oomycete cysts, and fungi (Agaricales) are compiled and detailed here.

Common problems in the processing of biological samples for observations with the scanning electron microscope (SEM) include cell collapse, treatment of ...

Micron-scale Phenotyping Techniques of Maize Vascular Bundles Based on X-ray Microcomputed Tomography

It is necessary to accurately quantify the anatomical structures of maize materials based on high-throughput image analysis techniques. Here, we provide a 'sample preparation protocol' for maize materials (i.e., stem, leaf, and root) suitable for ordinary microcomputed tomography (micro-CT) scanning. Based on high-resolution CT images of maize stem, leaf, and root, we describe two protocols for the phenotypic analysis of vascular bundles: (1) based on the CT image of maize stem and leaf, we developed a specific image analysis pipeline to automatically extract 31 and 33 phenotypic traits of vascular bundles; (2) based on the CT image series of maize root, we set up an image processing scheme for the three-dimensional (3-D) segmentation of metaxylem vessels, and extracted two-dimensional (2-D) and 3-D phenotypic traits, such as volume, surface area of metaxylem vessels, etc. Compared with traditional manual measurement of vascular bundles of maize materials, the proposed protocols significantly improve the efficiency and accuracy of micron-scale phenotypic quantification.

We provide a novel method to improve the X-ray absorption contrast of maize tissue suitable for ordinary microcomputed tomography scanning. Based on CT images, we introduce a set of image-processing workflows for different maize materials to effectively extract microscopic phenotypes of vascular bundles of maize.

It is necessary to accurately quantify the anatomical structures of maize materials based on high-throughput image analysis techniques. Here, we provide a ...

Culturing and Screening the Plant Parasitic Nematode Ditylenchus dipsaci

Plant-parasitic nematodes (PPNs) destroy over 12% of global food crops every year, which equates to roughly 157 billion dollars (USD) lost annually. With a growing global population and limited arable land, controlling PPN infestation is critical for food production. Compounding the challenge of maximizing crop yields are the mounting restrictions on effective pesticides because of a lack of nematode selectivity. Hence, developing new and safe chemical nematicides is vital to food security. In this protocol, the culture and collection of the PPN species Ditylenchus dipsaci are demonstrated. D. dipsaci is both economically damaging and relatively resistant to most modern nematicides. The current work also explains how to use these nematodes in screens for novel small molecule nematicides and reports on data collection and analysis methodologies. The demonstrated pipeline affords a throughput of thousands of compounds per week and can be easily adapted for use with other PPN species such as Pratylenchus penetrans. The techniques described herein can be used to discover new nematicides, which may, in turn, be further developed into highly selective commercial products that safely combat PPNs to help feed an increasingly hungry world.

Culturing and Screening the Plant Parasitic Nematode Ditylenchus dipsaci

The present protocol describes a reliable and straightforward method for culturing, collecting, and screening Ditylenchus dipsaci.

Plant-parasitic nematodes (PPNs) destroy over 12% of global food crops every year, which equates to roughly 157 billion dollars (USD) lost annually. With ...

Mycorrhizal Maps as a Tool to Explore Colonization Patterns and Fungal Strategies in the Roots of Festuca rubra and Zea mays

Arbuscular mycorrhizal fungi are symbionts in the roots of plants. Their role is to sustain host development and maintain the nutritional equilibrium in the ecosystems. The colonization process is dependent on several factors like soil ecology, the genetic diversity of the fungi and host, and agronomic practices. Their synchronized action leads to the development of a complex hyphal network and leads to the secondary development of vesicles and arbuscules in the root cells. The aim of this research was to analyze the efficiency of the mycorrhizal patterns (MycoPatt) method for the positioning of fungal structures in the roots of Festuca rubra and Zea mays. Another objective was to explore the fungal colonization strategy as revealed by mycorrhizal maps of each species. The acquisition and assemblage of multiple microscopic images allow mycorrhizal colonization assessment in both corn and red fescue plants to provide information on the realistic position of the developed structures. The observed mycorrhizal patterns highlight the variable efficiency of each plant in terms of developing connections with soil symbiotic fungi, caused by applied treatments and growth stage. Mycorrhizal detailed maps obtained through the MycoPatt method are useful for the early detection of plant efficiency in symbiotic acquisition from the soil.

Mycorrhizal Maps as a Tool to Explore Colonization Patterns and Fungal Strategies in the Roots of Festuca rubra and Zea mays

The protocol here describes the methods for the assessment of the arbuscular mycorrhizal colonization patterns and strategy in roots for two species: Zea mays and Festuca rubra. The use of the MycoPatt method permits the calculation of parameters, the conversion of mycorrhizal structures into digital data, and the mapping of their real position in roots.

Arbuscular mycorrhizal fungi are symbionts in the roots of plants. Their role is to sustain host development and maintain the nutritional equilibrium in ...

Microscopy Techniques for Interpreting Fungal Colonization in Mycoheterotrophic Plants Tissues and Symbiotic Germination of Seeds

Structural botany is an indispensable perspective to fully understand the ecology, physiology, development, and evolution of plants. When researching mycoheterotrophic plants (i.e., plants that obtain carbon from fungi), remarkable aspects of their structural adaptations, the patterns of tissue colonization by fungi, and the morphoanatomy of subterranean organs can enlighten their developmental strategies and their relationships with hyphae, the source of nutrients. Another important role of symbiotic fungi is related to the germination of orchid seeds; all Orchidaceae species are mycoheterotrophic during germination and seedling stage (initial mycoheterotrophy), even the ones that photosynthesize in adult stages. Due to the lack of nutritional reserves in orchid seeds, fungal symbionts are essential to provide substrates and enable germination. Analyzing germination stages by structural perspectives can also answer important questions regarding the fungi interaction with the seeds. Different imaging techniques can be applied to unveil fungi endophytes in plant tissues, as are proposed in this article. Freehand and thin sections of plant organs can be stained and then observed using light microscopy. A fluorochrome conjugated to wheat germ agglutinin can be applied to the fungi and co-incubated with Calcofluor White to highlight plant cell walls in confocal microscopy. In addition, the methodologies of scanning and transmission electron microscopy are detailed for mycoheterotrophic orchids, and the possibilities of applying such protocols in related plants is explored. Symbiotic germination of orchid seeds (i.e., in the presence of mycorrhizal fungi) is described in the protocol in detail, along with possibilities of preparing the structures obtained from different stages of germination for analyses with light, confocal, and electron microscopy.

This protocol aims to provide detailed procedures for collecting, fixing, and maintaining mycoheterotrophic plant samples, applying different microscopy techniques such as scanning and transmission electron microscopy, light, confocal, and fluorescence microscopy to study fungal colonization in plants tissues and seeds germinated with mycorrhizal fungi.

Structural botany is an indispensable perspective to fully understand the ecology, physiology, development, and evolution of plants. When researching ...

Leveraging Micro-CT Scanning to Analyze Parasitic Plant-Host Interactions

Samenvatting

Meer video's verkennen