Preparation and Reactivity of a Triphosphenium Bromide Salt: A Convenient and Stable Source of Phosphorus(I)

Podsumowanie

The synthesis of a triphosphenium bromide salt is described and its use as a P⁺ transfer agent is outlined by reactions with an N-heterocyclic carbene and an anionic bisphosphine, yielding an NHC-stabilized P(I) cation and a P(I) containing zwitterion, respectively.

Streszczenie

We present herein the optimized synthesis of a triphosphenium bromide salt. Apart from being a versatile metathesis reagent, this unusually stable low-valent-phosphorus-containing compound acts as a useful P⁺ transfer agent. Unlike traditional methods employed to access low-coordinate phosphorus species which usually require pyrophoric phosphorus-containing precursors (white phosphorus, Tris(trimethylsilyl)phosphine, etc.), or harsh reducing agents (alkali metals, potassium graphite, etc.), the current approach does not involve pyrophoric or explosive reagents and can be done on large scales (>20 g) in excellent yields by undergraduates with basic air-free synthetic training. The bromide counter ion is readily exchanged with other anions such as tetraphenyl borate (described herein) using typical salt metathesis reagents to obtain materials with desired properties and reactivities. The versatility of this P⁺ transfer approach is exemplified by the reactions of these triphosphenium precursors with an N-heterocyclic carbene and an anionic bisphosphine, each of which readily displace the neutral bisphosphine to give an NHC-stabilized phosphorus(I) cation and a phosphorus(I) containing zwitterion, respectively.

Wprowadzenie

The chemistry of main group elements in unusually low oxidation or valence states has been an area of significant interest over the last two decades.¹ Aside from the fundamental interest arising from their unique bonding and structure, such compounds often display reactivities that are very different from those of their more typical oxidation state counterparts. In this sense, they offer significant potential as reagents to build more complex main group-element containing materials.

A landmark class of low-valent phosphorus containing molecules are "triphosphenium" cations which were first reported by Schmidpeter in the 1980s.² These ions feature a dicoordinate phosphorus(I) ion ligated by two phosphonio substituents, with the more stable variants built from a chelating framework.^3,4 Our group has optimized the syntheses of triphosphenium halide salts^5-7 and has demonstrated that these stable compounds are versatile P⁺ transfer agents that are useful for the controlled synthesis of phosphorus(I)-containing oligomers,⁸ zwitterions,⁹ and phosphamethine cyanine dyes.^10,11 While the original syntheses of such compounds often involve dangerous phosphorus-containing reagents and/or highly reducing conditions, the controlled route we present is safe, P-atom efficient, and convenient. The method results in high purity materials which may be used as dyes, ligands for transition metal complexes and precursors for more complex phosphorus-containing species.

Protokół

NOTE: Deuterated solvents were dried according to literature procedure when necessary, and all other solvents were dried over a series of Grubbs'-type columns¹² and degassed prior to use. Potassium 1,2,4-tris(diphenylphosphino)cyclopentadiene [K][(Ph₂P)₃C₅H₂] and the N-heterocyclic carbene 1,3,4,5-tetramethylimidazole-2-ylidene (^MeNHC^Me) were synthesized according to literature procedures and the latter was sublimed prior to use.^9,13 Cyclohexene was dried over CaH₂, distilled and degassed prior to use. Acetonitrile-d₃ (CD₃CN) and dichloromethane-d₂ (CD₂Cl₂) were dried over phosphorus pentoxide and degassed prior to use. Diatomaceous earth was dried in an oven at 150 ºC overnight prior to use. All other reagents were used as received.

1. Synthesis of [dppeP][Br]

1. Dissolve 1.00 g of 1,2-bis(diphenylphosphino)ethane (dppe) in approximately 40 ml of anhydrous, degassed dichloromethane (DCM) in a 250 ml Schlenk flask, under inert gas, equipped with a rubber septum.
2. By syringe or cannula transfer, add 2.53 ml of dry, degassed, cyclohexene to the Schlenk flask containing the stirring solution of dppe.
3. To this solution, add 0.26 ml of PBr₃ via syringe, dropwise with vigorous stirring. The solution should immediately turn pale yellow, and white precipitate forms after stirring the solution for 20 min. Allow the reaction to stir for several hours or overnight.
4. After stirring for several hours or overnight, filter the reaction mixture through a fritted flask topped with a one-inch thick diatomaceous earth plug to remove the precipitate.
5. Collect the resulting solution and remove the DCM under vacuum on a Schlenk line.
6. To the resulting oil, add approximately 75 ml of tetrahydrofuran (THF) while stirring vigorously (or sonicating) to precipitate the product as a white solid.
7. Immediately after the white precipitate forms, collect it via filtration with a fritted flask under an inert atmosphere. Collect the solid immediately, and do not leave the suspension to stir for more than 30 min.
8. Once collected, dissolve a small amount of [dppeP][Br] in CD₂Cl₂ or CDCl₃ to obtain ³¹P, ¹H and ¹³C NMR to confirm purity. [dppeP][Br] can be stored indefinitely in an inert atmosphere, or for several weeks on the benchtop.⁶

2. Synthesis of [dppeP][BPh₄]

1. Dissolve 0.5 g of [dppeP][Br] salt in 5 ml of DCM, in a Schlenk flask. Stir the solution under nitrogen gas. Then, add 0.35 g of sodium tetraphenylborate in 5 ml of THF.
2. Allow the solution to stir for several hours or overnight, until a fine precipitate forms.
3. Centrifuge the suspension to eliminate the precipitate (KBr) and remove the solvent under reduced pressure to yield [dppeP][BPh₄] as a white powder.

3. Synthesis of [^MeNHC^Me₂P][BPh₄]

1. Load a 100 ml Schlenk flask with 0.200 g of ^MeNHC^Me and a stir bar under an inert atmosphere.
2. Load a 100 ml round bottom flask with 0.603 g of [dppeP][BPh₄] under an inert atmosphere.
3. Cannula transfer 20 ml of THF to the Schlenk flask containing 0.200 g of ^MeNHC^Me and begin magnetic stirring.
4. Cannula transfer 20 ml of THF to the 100 ml round bottom flask with 0.603 g of [dppeP][BPh₄] and stir until dissolved.
5. Cannula transfer the solution of [dppeP][BPh₄] in THF to the stirring solution of ^MeNHC^Me in THF and allow the yellow solution to stir for 1 hr.
6. Concentrate the yellow solution to a third of the original volume (13 ml) under reduced pressure.
7. Add diethyl ether (Et₂O) (40 ml) to the stirring concentrated solution to initiate precipitation of the yellow product and allow the resultant suspension to stir for 20 min.
8. Place a sealed frit fitted attached to a 100 ml Schlenk flask on the Schlenk line and create an inert atmosphere by evacuating the flask using vacuum and refilling the flask with nitrogen from the Schleck line. Evacuate for 5 min and refill with nitrogen 3 times to insure an inert atmosphere.
9. Cannula transfer the Et₂O suspension into the apparatus and filter the precipitate.
10. Wash the precipitate with 10 ml of Et₂O three times and allow the precipitate to dry under reduced pressure for 2 hr.
11. Optional) Allow the filtrate and washings to evaporate slowly under nitrogen to recrystallize dppe. Wash the crystals with a minimal amount of hexanes, dry, and collect the crystals for re-use.

4. Synthesis of (Ph₂P)C₅H₂(Ph₂P)₂P

1. To a 150 ml Schlenk flask containing 0.484g [dppeP][Br] in an inert atmosphere, add 40 ml of dry, degassed THF.
2. Place the Schlenk in a dry-ice/acetone bath to cool the suspension to -78 °C.
3. Cannula transfer a THF solution of 0.625g [K][(Ph₂P)₃C₅H₂] in a round bottom flask, to the Schlenk flash containing [dppeP][Br].
4. When the addition is complete, remove the Schlenk flask from the acetone bath and allow to warm to room temperature. After stirring for 2 hr, the solution will be light yellow with a white precipitate present.
5. Transfer the suspension to an air-free fritted filter equipped with a 150 ml Schlenk flask, to remove the white precipitate (KBr).
6. Collect the yellow solution and remove the THF under vacuum.
7. Add an 80:20 mixture of dry and degassed diethyl ether:pentane to the resulting oil and allow to stir for 20 min.
8. Collect the product (Ph₂P)C₅H₂(Ph₂P)₂P as a pale yellow precipitate by filtering the suspension through an air-free, fritted flask. The remaining ether/pentane solution contains the dppe impurity and may be discarded or the solvent may be removed under vacuum and the dppe collected for further use.

Wyniki

A stable salt ([dppeP][Br]) containing a low valent phosphorus(I) source can be synthesized easily by the addition of PBr₃ to diphenylphosphinoethane (dppe) in the presence of excess cyclohexene (Figure 1)⁶.

Upon work up of the reaction, ³¹P NMR spectra show the presence of a triplet signal that is significantly shielded at -220 ppm, and a doublet signal at 50 ppm. Strong coupling between the nuclei is observed ...

Dyskusje

Crystal structures and multi-nuclear NMR (³¹P, ¹H, and ¹³C) were obtained for all products reported to confirm connectivity. Electrospray-ionization mass spectrometry was used to confirm presence of the cations and elemental analysis was used to confirm analytical purity of the samples.

It is imperative that all reactions are done in an air-free and dry environment to ensure that no unexpected by-products or decomposition products are formed. Using a slight exc...

Materiały

Name	Company	Catalog Number	Comments
bis(diphenyl)phosphino ethane (dppe)	Strem	1663-45-2	98% Stored in gloved box, used as is.
Anhydrous Dichloromethane (DCM)	Sigma Aldrich	270997	Purified through solvent purification system, or standard methods
Anhydrous Cyclohexene	Sigma Aldrich	29240	Dried over calcium hydride and distilled.
Phosphorus Tribromide (PBr3)	Sigma Aldrich	157783	99% Stored in glove box, used as is. Air sensitive.
Anyhydrous Tetrahydrofuran (THF)	Sigma Aldrich	401757	Purified through solvent purification system, or standard methods
Methylene Chloride-D2 (CD2Cl2)	Sigma Aldrich	DLM-23-25	Dried over phosphorus pentoxide, vacuum transferred or distilled
Acetonitrile	Alfa Aesar	5/8/1975	Stored in glove box, used as is
Sodium Tetraphenylborate	Sigma Aldrich	T25402	Stored in glove box, used as is
Anyhydrous Diethyl Ether	Sigma Aldrich	673811	Purified through solvent purification system, or standard methods
Anhydrous Pentane	Sigma Aldrich	236705	Purified through solvent purification system, or standard methods