JoVE Logo

Sign In

A subscription to JoVE is required to view this content. Sign in or start your free trial.

In This Article

  • Summary
  • Abstract
  • Introduction
  • Protocol
  • Results
  • Discussion
  • Disclosures
  • Acknowledgements
  • Materials
  • References
  • Reprints and Permissions

Summary

The synthesis of a triphosphenium bromide salt is described and its use as a P+ transfer agent is outlined by reactions with an N-heterocyclic carbene and an anionic bisphosphine, yielding an NHC-stabilized P(I) cation and a P(I) containing zwitterion, respectively.

Abstract

We present herein the optimized synthesis of a triphosphenium bromide salt. Apart from being a versatile metathesis reagent, this unusually stable low-valent-phosphorus-containing compound acts as a useful P+ transfer agent. Unlike traditional methods employed to access low-coordinate phosphorus species which usually require pyrophoric phosphorus-containing precursors (white phosphorus, Tris(trimethylsilyl)phosphine, etc.), or harsh reducing agents (alkali metals, potassium graphite, etc.), the current approach does not involve pyrophoric or explosive reagents and can be done on large scales (>20 g) in excellent yields by undergraduates with basic air-free synthetic training. The bromide counter ion is readily exchanged with other anions such as tetraphenyl borate (described herein) using typical salt metathesis reagents to obtain materials with desired properties and reactivities. The versatility of this P+ transfer approach is exemplified by the reactions of these triphosphenium precursors with an N-heterocyclic carbene and an anionic bisphosphine, each of which readily displace the neutral bisphosphine to give an NHC-stabilized phosphorus(I) cation and a phosphorus(I) containing zwitterion, respectively.

Introduction

The chemistry of main group elements in unusually low oxidation or valence states has been an area of significant interest over the last two decades.1 Aside from the fundamental interest arising from their unique bonding and structure, such compounds often display reactivities that are very different from those of their more typical oxidation state counterparts. In this sense, they offer significant potential as reagents to build more complex main group-element containing materials.

A landmark class of low-valent phosphorus containing molecules are "triphosphenium" cations which were first reported by Schmidpeter in the 1980s.2 These ions feature a dicoordinate phosphorus(I) ion ligated by two phosphonio substituents, with the more stable variants built from a chelating framework.3,4 Our group has optimized the syntheses of triphosphenium halide salts5-7 and has demonstrated that these stable compounds are versatile P+ transfer agents that are useful for the controlled synthesis of phosphorus(I)-containing oligomers,8 zwitterions,9 and phosphamethine cyanine dyes.10,11 While the original syntheses of such compounds often involve dangerous phosphorus-containing reagents and/or highly reducing conditions, the controlled route we present is safe, P-atom efficient, and convenient. The method results in high purity materials which may be used as dyes, ligands for transition metal complexes and precursors for more complex phosphorus-containing species.

Protocol

NOTE: Deuterated solvents were dried according to literature procedure when necessary, and all other solvents were dried over a series of Grubbs'-type columns12 and degassed prior to use. Potassium 1,2,4-tris(diphenylphosphino)cyclopentadiene [K][(Ph2P)3C5H2] and the N-heterocyclic carbene 1,3,4,5-tetramethylimidazole-2-ylidene (MeNHCMe) were synthesized according to literature procedures and the latter was sublimed prior to use.9,13 Cyclohexene was dried over CaH2, distilled and degassed prior to use. Acetonitrile-d3 (CD3CN) and dichloromethane-d2 (CD2Cl2) were dried over phosphorus pentoxide and degassed prior to use. Diatomaceous earth was dried in an oven at 150 ºC overnight prior to use. All other reagents were used as received.

1. Synthesis of [dppeP][Br]

  1. Dissolve 1.00 g of 1,2-bis(diphenylphosphino)ethane (dppe) in approximately 40 ml of anhydrous, degassed dichloromethane (DCM) in a 250 ml Schlenk flask, under inert gas, equipped with a rubber septum.
  2. By syringe or cannula transfer, add 2.53 ml of dry, degassed, cyclohexene to the Schlenk flask containing the stirring solution of dppe.
  3. To this solution, add 0.26 ml of PBr3 via syringe, dropwise with vigorous stirring. The solution should immediately turn pale yellow, and white precipitate forms after stirring the solution for 20 min. Allow the reaction to stir for several hours or overnight.
  4. After stirring for several hours or overnight, filter the reaction mixture through a fritted flask topped with a one-inch thick diatomaceous earth plug to remove the precipitate.
  5. Collect the resulting solution and remove the DCM under vacuum on a Schlenk line.
  6. To the resulting oil, add approximately 75 ml of tetrahydrofuran (THF) while stirring vigorously (or sonicating) to precipitate the product as a white solid.
  7. Immediately after the white precipitate forms, collect it via filtration with a fritted flask under an inert atmosphere. Collect the solid immediately, and do not leave the suspension to stir for more than 30 min.
  8. Once collected, dissolve a small amount of [dppeP][Br] in CD2Cl2 or CDCl3 to obtain 31P, 1H and 13C NMR to confirm purity. [dppeP][Br] can be stored indefinitely in an inert atmosphere, or for several weeks on the benchtop.6

2. Synthesis of [dppeP][BPh4]

  1. Dissolve 0.5 g of [dppeP][Br] salt in 5 ml of DCM, in a Schlenk flask. Stir the solution under nitrogen gas. Then, add 0.35 g of sodium tetraphenylborate in 5 ml of THF.
  2. Allow the solution to stir for several hours or overnight, until a fine precipitate forms.
  3. Centrifuge the suspension to eliminate the precipitate (KBr) and remove the solvent under reduced pressure to yield [dppeP][BPh4] as a white powder.

3. Synthesis of [MeNHCMe2P][BPh4]

  1. Load a 100 ml Schlenk flask with 0.200 g of MeNHCMe and a stir bar under an inert atmosphere.
  2. Load a 100 ml round bottom flask with 0.603 g of [dppeP][BPh4] under an inert atmosphere.
  3. Cannula transfer 20 ml of THF to the Schlenk flask containing 0.200 g of MeNHCMe and begin magnetic stirring.
  4. Cannula transfer 20 ml of THF to the 100 ml round bottom flask with 0.603 g of [dppeP][BPh4] and stir until dissolved.
  5. Cannula transfer the solution of [dppeP][BPh4] in THF to the stirring solution of MeNHCMe in THF and allow the yellow solution to stir for 1 hr.
  6. Concentrate the yellow solution to a third of the original volume (13 ml) under reduced pressure.
  7. Add diethyl ether (Et2O) (40 ml) to the stirring concentrated solution to initiate precipitation of the yellow product and allow the resultant suspension to stir for 20 min.
  8. Place a sealed frit fitted attached to a 100 ml Schlenk flask on the Schlenk line and create an inert atmosphere by evacuating the flask using vacuum and refilling the flask with nitrogen from the Schleck line. Evacuate for 5 min and refill with nitrogen 3 times to insure an inert atmosphere.
  9. Cannula transfer the Et2O suspension into the apparatus and filter the precipitate.
  10. Wash the precipitate with 10 ml of Et2O three times and allow the precipitate to dry under reduced pressure for 2 hr.
  11. Optional) Allow the filtrate and washings to evaporate slowly under nitrogen to recrystallize dppe. Wash the crystals with a minimal amount of hexanes, dry, and collect the crystals for re-use.

4. Synthesis of (Ph2P)C5H2(Ph2P)2P

  1. To a 150 ml Schlenk flask containing 0.484g [dppeP][Br] in an inert atmosphere, add 40 ml of dry, degassed THF.
  2. Place the Schlenk in a dry-ice/acetone bath to cool the suspension to -78 °C.
  3. Cannula transfer a THF solution of 0.625g [K][(Ph2P)3C5H2] in a round bottom flask, to the Schlenk flash containing [dppeP][Br].
  4. When the addition is complete, remove the Schlenk flask from the acetone bath and allow to warm to room temperature. After stirring for 2 hr, the solution will be light yellow with a white precipitate present.
  5. Transfer the suspension to an air-free fritted filter equipped with a 150 ml Schlenk flask, to remove the white precipitate (KBr).
  6. Collect the yellow solution and remove the THF under vacuum.
  7. Add an 80:20 mixture of dry and degassed diethyl ether:pentane to the resulting oil and allow to stir for 20 min.
  8. Collect the product (Ph2P)C5H2(Ph2P)2P as a pale yellow precipitate by filtering the suspension through an air-free, fritted flask. The remaining ether/pentane solution contains the dppe impurity and may be discarded or the solvent may be removed under vacuum and the dppe collected for further use.

Results

A stable salt ([dppeP][Br]) containing a low valent phosphorus(I) source can be synthesized easily by the addition of PBr3 to diphenylphosphinoethane (dppe) in the presence of excess cyclohexene (Figure 1)6.

Upon work up of the reaction, 31P NMR spectra show the presence of a triplet signal that is significantly shielded at -220 ppm, and a doublet signal at 50 ppm. Strong coupling between the nuclei is observed ...

Discussion

Crystal structures and multi-nuclear NMR (31P, 1H, and 13C) were obtained for all products reported to confirm connectivity. Electrospray-ionization mass spectrometry was used to confirm presence of the cations and elemental analysis was used to confirm analytical purity of the samples.

It is imperative that all reactions are done in an air-free and dry environment to ensure that no unexpected by-products or decomposition products are formed. Using a slight exc...

Disclosures

The authors have nothing to disclose.

Acknowledgements

The authors thank the Natural Sciences and Engineering Research Council (NSERC) of Canada and the Canada Foundation for Innovation (CFI) for funding and scholarship support.

Materials

NameCompanyCatalog NumberComments
bis(diphenyl)phosphino ethane (dppe)Strem1663-45-298% Stored in gloved box, used as is. 
Anhydrous Dichloromethane (DCM)Sigma Aldrich270997Purified through solvent purification system, or standard methods
Anhydrous CyclohexeneSigma Aldrich29240Dried over calcium hydride and distilled.
Phosphorus Tribromide (PBr3)Sigma Aldrich15778399% Stored in glove box, used as is. Air sensitive.
Anyhydrous Tetrahydrofuran (THF)Sigma Aldrich401757Purified through solvent purification system, or standard methods
Methylene Chloride-D2 (CD2Cl2)Sigma AldrichDLM-23-25Dried over phosphorus pentoxide, vacuum transferred or distilled
AcetonitrileAlfa Aesar5/8/1975Stored in glove box, used as is
Sodium TetraphenylborateSigma AldrichT25402Stored in glove box, used as is
Anyhydrous Diethyl Ether Sigma Aldrich673811Purified through solvent purification system, or standard methods
Anhydrous PentaneSigma Aldrich236705Purified through solvent purification system, or standard methods

References

  1. Macdonald, C. L. B., Ellis, B. D., Swidan, A. Low-Oxidation-State Main Group Compounds. Encyclopedia of Inorganic and Bioinorganic Chemistry. , (2011).
  2. Coffer (née Monks), P. K., Dillon, K. B. Cyclic triphosphenium ions and related species. Coord. Chem. Rev. 257 (5-6), 910-923 (2013).
  3. Schmidpeter, A., Lochschmidt, S. New Products from PCl3, P(NMe2)3, and AlCl3. Angew. Chem. Internat. Ed. in Engl. 25 (3), 253-254 (1986).
  4. Schmidpeter, A., Lochschmidt, S., Karaghiosoff, K., Sheldrickb, W. S. Triphosphane-l,3-di-ium Ions. J. Chem. Soc. Chem. Commun. , 1447-1448 (1985).
  5. Ellis, B. D., Carlesimo, M., Macdonald, C. L. B. Stabilised phosphorus(I) and arsenic(I) iodide: readily-synthesised reagents for low oxidation state main group chemistry. Chem. Commun. 15 (15), 1946-1947 (2003).
  6. Norton, E. L., Szekely, K. L. S., Dube, J. W., Bomben, P. G., Macdonald, C. L. B. A convenient preparative method for cyclic triphosphenium bromide and chloride salts. Inorg. Chem. 47 (3), 1196-1203 (2008).
  7. Ellis, B. D., Macdonald, C. L. B. Phosphorus(I) iodide: a versatile metathesis reagent for the synthesis of low oxidation state phosphorus compounds. Inorg. Chem. 45 (17), 6864-6874 (2006).
  8. Kosnik, S. C., Farrar, G. J., Norton, E. L., Cooper, B. F. T., Ellis, B. D., Macdonald, C. L. B. Low-Valent Chemistry: An Alternative Approach to Phosphorus- Containing Oligomers. Inorg. Chem. 11 (53), 13061-13069 (2014).
  9. Kosnik, S. C., Macdonald, C. L. B. A zwitterionic triphosphenium compound as a tunable multifunctional donor. Dalton Trans. 45 (14), 6251-6258 (2016).
  10. Binder, J. F., Swidan, A., Tang, M., Nguyen, J. H., Macdonald, C. L. B. Remarkably stable chelating bis-N-heterocyclic carbene adducts of phosphorus(I) cations. Chem. Commun. 51 (36), 7741-7744 (2015).
  11. Binder, J. F., Corrente, A. M., Macdonald, C. L. B. A simple route to phosphamethine cyanines from S,N-heterocyclic carbenes. Dalton Trans. 45 (5), 2138-2147 (2016).
  12. Pangborn, A. B., Ma Giardello, ., Grubbs, R. H., Rosen, R. K., Timmers, F. J. Safe and Convenient Procedure for Solvent Purification. Organometallics. 15 (5), 1518-1520 (1996).
  13. Smaliy, R. V., Beaupérin, M., et al. Hexaphosphine: A multifaceted ligand for transition metal coordination. Eur. J. Inorg. Chem. (9), 1347-1352 (2012).
  14. Klebach, T. C., Lourens, R., Bickelhaupt, F. Synthesis of mesityldiphenylmethylenephosphine: a stable compound with a localized phosphorus:carbon bond. J. Amer. Chem. Soc. 100 (15), 4886-4888 (1978).
  15. Alcarazo, M. α-Cationic Phosphines: Synthesis and Applications. Chem. Eur. J. 20 (26), 7868-7877 (2014).

Reprints and Permissions

Request permission to reuse the text or figures of this JoVE article

Request Permission

Explore More Articles

Keyword Extraction Triphosphenium BromidePhosphorus ISynthetic SourcePhosphorus containing MoleculesInorganic ChemistryOrganic ChemistryCatalysisConvenient SynthesisHigh YieldingAir And Moisture StableDppeCyclohexanePhosphorus TribromideDichloromethaneTetrahydrofuranP I bromide SaltSodium TetraphenylborateSchlenk FlaskFritted FlaskCentrifugationCanula TransferVacuum

This article has been published

Video Coming Soon

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved