The technical assistance and instrumentation of the University of Maryland Greenebaum Cancer Center Translational Core Facility, especially Drs. Rena Lapidus and Mariola Sadowska, are gratefully acknowledged. The work responsible for the development of this assay was funded in part by NIH RO1CA108846, AHA Grant-in-Aid GRNT2130014, a VA Merit Award to A.P., and by the University of Maryland Cigarette Restitution Funds (CRF) provided to the Marlene &amp; Stewart Greenebaum Cancer Center.

Several steps are performed ahead of time and several reagents are prepared and stored prior to the procedure: (1) cell culture and protein isolation, (2) preparation of oligonucleotide, (3) preparation of 96-well plates, (4) nuclear extract incubation overnight. Procedure requires 2 days because of the overnight incubation of nuclear protein with DNA oligonucleotides.
1. Preparation of Buffers
1.1 Nuclear protein isolation
<ol>
	<li>Hypotonic Buffer: To prepare 100 ml of hypotonic buffer, add 1 ml (1 M HEPES, pH 7.9), 150 &mu;l (1 M MgCl2), 333 &mu;l (3 M KCl) to 98.3 ml H2O. Final Concentrations: 10 mM HEPES, 1.5 mM MgCl2, 10 mM KCl. For Hypotonic buffer + NP40 (for use in step 2.11): Add 0.5 ml (10% NP40) to 9.5 ml Hypotonic buffer for final 0.5% NP40.</li>
	<li>Low Salt Buffer: To prepare 100 ml of low salt buffer (for use in step 2.15), add 1 ml (1 M HEPES, pH 7.9), 25 ml Glycerol, 150 &mu;l (1 M MgCl2), 666 &mu;l (3 M KCl), 40 &mu;l (0.5 M EDTA) to 73 ml H2O. Final concentrations: 10 mM HEPES, 25% Glycerol, 1.5 mM MgCl2, 20 mM KCl, 0.2 mM EDTA.</li>
	<li>High Salt Buffer: To prepare 100 ml of high salt buffer (for use in step 2.15), add 1 ml (1 M HEPES, pH 7.9), 25 ml Glycerol, 150 &mu;l (1 M MgCl2), 26.7 ml (3 M KCl), 40 &mu;l (0.5M EDTA) to 47 ml H2O. Final concentrations: 10 mM HEPES, 25% Glycerol, 1.5 mM MgCl2, 800 mM KCl, 0.2 mM EDTA.</li>
	<li>10% NP40 Detergent: 10 ml NP40 to 90 ml H2O</li>
	<li>Protease and phosphatase inhibitors [added to hypotonic buffer + NP40 (step 2.11), to low salt buffer (step 2.15), and to high salt buffer (step 2.15) just prior to use]: Add 2.5 &mu;l (1 M DTT) and 50 &mu;l of protease inhibitors (100x) to 5 ml of each buffer for final concentration of 0.5 mM DTT and 1x protease inhibitors. The protease inhibitor 100x stock mixture includes: sodium fluoride (Ser/Thr, acidic phosphatases), sodium orthovanadate (Tyr, alkaline phosphatases), &#946;-glycerophosphate (Ser/Thr phosphatases), sodium pyrophosphate (Ser/Thr phosphatases), Aprotinin (Ser proteases), Bestatin (amino-peptidases), E64 (Cysteine proteases), Leupeptin (Ser/Cys proteases), EDTA (metalloproteases).</li>
</ol>
1.2 Preparation of assay plates
<ol>
	<li>Plate fixing solution: To prepare 500 ml of solution, add 5.25 g sodium carbonate to 500 ml H2O, mix well and adjust pH to 9.7 for a final concentration of 0.1 M sodium carbonate.</li>
	<li>Plate blocking solution: To prepare stock poly dI/dC oligonucleotide, resuspend 1 Unit (~50 mg) of poly dI/dC in 1 ml of 10 mM Tris/HCl, pH 7.9 containing 1 mM EDTA for a stock concentration of 50 &mu;g/&mu;l. Stock is diluted to 1 &mu;g/&mu;l prior to use.</li>
</ol>
1.3 Wash buffers and antibody dilutions
NOTE: Streptavidin wash buffer is used to wash plates in between additions and to dilute primary and secondary antibodies.
<ol>
	<li>To prepare 1 L of Streptavidin wash buffer, add 2.4 g Tris/HCl, 37.5 ml (4 M NaCl), 10 ml (10% BSA), 5 ml (10% Tween-20), to 1 L Millipore-sterile filtered water, pH 7.18. Store at 4 &deg;C. Final concentrations: 20 mM Tris/HCl, 150 mM NaCl, 0.1% BSA, 0.05% Tween-20.</li>
</ol>
1.4 DNA-binding buffer
NOTE: This buffer is stored at -20 &deg;C.
<ol>
	<li>To prepare 15 ml of DNA binding buffer, add 180 &mu;l (1 M HEPES, pH 7.9), 300 &mu;l (3 M KCl), 12 &mu;l (0.5 M EDTA, pH 8.0), 7.5 &mu;l (1 M DTT), 3.0 ml (60% glycerol), 300 &mu;l (50 &mu;g/&mu;l poly dI/dC) diluted with deionized/distilled H2O (12 ml). Final concentrations: 12 mM HEPES/pH 7.9, 60 mM KCl, 0.4 mM EDTA, 0.5 mM DTT, 12% glycerol, 1 &mu;g/&mu;l poly dI/dC.</li>
</ol>
2. Cell Culture and Nuclear Protein Isolation
NOTE: The preparation requires about 3 hr. Stimulation of cells will depend on experiment. The number of cells used for each experiment will vary and all volumes reflect a typical experiment using 3 x 107 cells/point. Adjust volumes to accommodate the cell number actually used in the experiment 6.
<ol>
	<li>To prepare nuclear protein for DNA binding assays, culture human cells that express RUNX2 (endothelial, osteosarcoma, breast cancer cells) in appropriate media 6.</li>
	<li>Treat subconfluent cells with nocodazole (0.2 &mu;g/ml for 16 hr) to arrest cells at the G2/M cell cycle boundary 6. Under these conditions, the RUNX2 protein is stabilized and maximal DNA binding is achieved. In this way, enough nuclear protein is available for multiple assays and inhibitors can be compared from the same preparation.</li>
	<li>For each step, pre-cool the centrifuge to 4 &deg;C and prepare buffers and chill 20 min at 4 &deg;C before cell harvest.</li>
	<li>Chill cells (4 &deg;C) and conduct procedures on ice.</li>
	<li>Centrifuge cells at 1,000 rpm for 5 min in a 15 ml polypropylene round-bottom tube.</li>
	<li>Wash 1x with ice-cold PBS (Ca2+ and Mg2+ free).</li>
	<li>Centrifuge again and discard PBS supernatant.</li>
	<li>Add 500 &mu;l of hypotonic buffer without protease inhibitors, being careful to completely resuspend the cell pellet.</li>
	<li>Transfer contents to a 1.5 ml Eppendorf tube.</li>
	<li>Immediately centrifuge at 5,500 rpm for 5.5 min; discard the supernatant and KEEP the cell pellet.</li>
	<li>Resuspend the cell pellet in 500 &mu;l of hypotonic buffer containing 0.5% NP40. Add protease and phosphatase inhibitors and 0.5 mM DTT (as described in step 1.1.5).</li>
	<li>Allow the sample to rest on ice for 30 min.</li>
	<li>Centrifuge at 13,000 rpm for 10 min.</li>
	<li>Discard the supernatant (contains the cytosolic proteins).</li>
	<li>Resuspend the nuclear pellet in 60 &mu;l each of low salt buffer (to which protease inhibitors and 0.5 mM DTT have been added from step 1.1.5) and high salt buffer (to which protease inhibitors and 0.5 mM DTT have been added from step 1.1.5) for a total of 120 &mu;l. Add 60 &mu;l of low salt buffer to the pellet first and resuspend, then add 60 &mu;l of high salt buffer. Vortex the pellet to aid in resuspension.</li>
</ol>
NOTE: This step helps get rid of some of the nuclear membrane proteins and set up for the lysis step: low salt first (resuspend pellet, vortex), then high salt (vortex) optimizes this step. Keep extract on ice for 30 min, with vortexing after the first 10 min.
<ol start="16">
	<li>Centrifuge at 12,000 rpm for 15 min; keep the supernatant containing the nuclear protein.</li>
	<li>Measure protein concentration (try to keep samples at 2-5 mg/ml), aliquot in appropriate amounts (10 &mu;l/tube) and store at -80 &deg;C.</li>
</ol>
NOTE: Estimated yield: 30 x 106 cells will yield 5 &mu;g/&mu;l protein in 120 &mu;l. 5 x 106 cells will yield 2.2 &mu;g/&mu;l protein in 40 &mu;l.
3. Preparation of Double Stranded Oligonucleotide
<ol>
	<li>Design complementary oligonucleotides with compatible half sites on the ends. For RUNX2 these are: 5'-CGTATTAACCACAATACTCGCGTATTAACCACAATACTCGCGTATTAACCACAATAC TCG -3'-Biotin (sense) and 5'CGAGTATTGTGGTTAATACGCGAGTATTGTGGTTAATACGCGAGTATT GTGGTTAATACG -3'-Biotin (antisense).</li>
</ol>
NOTE: Pilot experiments determined that three RUNX2 binding sites and single-end labeled biotin yielded the most reproducible results.
<ol start="2">
	<li>Prepare 5x annealing buffer: Add 300 &mu;l (1 M Tris-HCl, pH 7.6), 30 &mu;l (1 M MgCl2), 10 &mu;l (1 M DTT) to 260 &mu;l H2O (final 600 &mu;l).</li>
	<li>To 200 pmol of each single-stranded oligonucleotide (3 &mu;l), add 12 &mu;l of 5x annealing buffer and 45 &mu;l H2O for a total of 60 &mu;l (200 pmol/60 &mu;l).</li>
	<li>Heat at 95 &deg;C for 5-10 min in a heating block.</li>
	<li>Cool to 65 &deg;C slowly (by setting the temperature to 65 &deg;C, it takes 15 min), then cool to room temperature slowly by turning off the power of the heating block (or by placing in 50 ml of the 65 &deg;C water in a beaker on ice; this takes 15-20 min).</li>
</ol>
4. Preparation of 96-well Plates
NOTE: Do not use milk proteins in the wash buffers.
<ol>
	<li>Fix plate with fixing solution (0.1 M sodium carbonate): add 300 &mu;l/well.</li>
	<li>Incubate for 2 hr by rocking at room temperature (RT), or no rocking at 4 &deg;C (O/N).</li>
	<li>Wash plate 3x with streptavidin wash buffer (WB): add 300 &mu;l/well each time.</li>
	<li>Add biotin-labeled double-stranded oligonucleotide (3 consensus binding sites per nucleotide) for 2 hr with rocking (1.25 nmol/well; 100 &mu;l/well).</li>
	<li>Wash 3x with cold WB: add 300 &mu;l/well and then immediately invert the plate into a sink and blot the edges on a paper towel after each addition.</li>
</ol>
NOTE: Do not use pipette tips to remove fluid from the plates as this may scrape avidin:biotin:DNA complexes from the wells. Do this for all subsequent wash steps.
5. Incubation with Nuclear Extract
NOTE: Do not substitute salmon or herring sperm DNA for the poly dI/dC blocking buffer. Avoid blocking plates with milk proteins. Both of these blocking agents result in high background values.
<ol>
	<li>Incubate with specific transcription factor prepared from nuclear extract (90 &mu;l/well). Prepare a master mix containing nuclear extract (DNA binding protein; 3-9 &mu;g/well) + poly dI/dC (1 &mu;g/&mu;l from a 50 &mu;g/ul stock) in 1x DNA binding buffer. Volume is as needed for the total number of wells required (90 &mu;l/well).</li>
	<li>Any potential inhibitor, such as vitamin D3 (Figure 2) or CADD compound 5221975 (Figure 3), or the appropriate dilution of the solvent control, such as ethanol, is added at this step.</li>
	<li>Place plate on rocking platform, O/N at 4 &deg;C.</li>
	<li>Wash 3x with WB: add 300 &mu;l/well</li>
</ol>
6. Addition of Primary Antibody
NOTE: Primary antibody dilutions should be prepared fresh - storage is not recommended.
<ol>
	<li>Dilute RUNX2-specific monoclonal antibody (stock 1 &mu;g/&mu;l) 1/5,000 in Streptavidin wash buffer. Prepare enough for addition to each well of the 96-well plate (90 &mu;l/well) in triplicate.</li>
	<li>Incubate for 1 hr at RT on a rocking platform.</li>
	<li>Wash 3x with WB; add 300 &mu;l/well.</li>
</ol>
7. Addition of Secondary Antibody
NOTE: Secondary antibody dilutions can be stored at 4 &deg;C overnight if needed the next day.
<ol>
	<li>Dilute Fab-specific affinity purified-HRP conjugated antibody (7.1 mg/ml stock) to 1:1,400 in Streptavidin wash buffer: 3.5 &mu;l antibody/5.0 ml wash buffer. Prepare enough for addition to each well of the 96-well plate (90 &mu;l/well) in triplicate.</li>
	<li>Incubate for 30 min at RT on a rocking platform.</li>
	<li>Wash 6x with WB by inverting plate into sink (300 &mu;l/well).</li>
</ol>
8. HRP Substrate and Product Development
<ol>
	<li>Add 50 &mu;l of TMB substrate per well directly from stock bottle.</li>
	<li>Incubate 10-20 min at RT in the dark (stop reaction method) or measure absorbance directly (continuous kinetic monitoring).</li>
</ol>
9. Reaction Measurement
<ol>
	<li>Stop reaction method: For visual stop reaction, check for color change from clear to blue and stop reaction with 50 &mu;l sulfuric acid.</li>
	<li>Measure absorbance at 450 nm with the Biotrak II Visible plate reader Spectrophotometer (Amersham Biosciences; GE Healthcare Biosciences Corp. Piscataway NJ, USA) or a similar instrument.</li>
	<li>Continuous kinetic monitoring method: Add substrate after the last wash and just prior to placing in the spectrophotometer (do not stop the reaction).</li>
	<li>Measure absorbance at 635 nm with the Bio-Tek Synergy HT Multi-reaction microplate reader Spectrophotometer (Bio-Tek Instruments, Inc; Winooski, VT, USA) or a similar instrument.</li>
</ol>

<ol>
	<li>Hellman, L. M., Fried, M. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrophoretic+mobility+shift+assay+(EMSA)+for+detecting+protein-nucleic+acid+interactions.">Electrophoretic mobility shift assay (EMSA) for detecting protein-nucleic acid interactions.</a> Nat. Protoc. 2, 1849-1861 (2007).</li><li>Bhattacharya, N., Sarno, A., Idler, I. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+detection+of+nuclear+factor-kappaB+activity+using+a+sensitive+oligo-based+chemiluminescent+enzyme-linked+immunosorbent+assay.">High-throughput detection of nuclear factor-kappaB activity using a sensitive oligo-based chemiluminescent enzyme-linked immunosorbent assay.</a> Int. J. Cancer. 127, 404-411 (2010).</li><li>Hartzell, D. D., Trinklein, N. D., Mendez, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+functional+analysis+of+the+CREB+signaling+pathway+using+HaloCHIP-chip+and+high+throughput+reporter+assays.">A functional analysis of the CREB signaling pathway using HaloCHIP-chip and high throughput reporter assays.</a> BMC Genomics. 10, 497 (2009).</li><li>Vuori, K. A., Ahlskog, J. K., Sistonen, L., Nikinmaa, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=TransLISA,+a+novel+quantitative,+nonradioactive+assay+for+transcription+factor+DNA-binding+analyses.">TransLISA, a novel quantitative, nonradioactive assay for transcription factor DNA-binding analyses.</a> FEBS J. 276, 7366-7374 (2009).</li><li>D'Souza, D. R., Salib, M. M., Bennett, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hyperglycemia+Regulates+RUNX2+Activation+and+Cellular+Wound+Healing+through+the+Aldose+Reductase+Polyol+Pathway.">Hyperglycemia Regulates RUNX2 Activation and Cellular Wound Healing through the Aldose Reductase Polyol Pathway.</a> J. Biol. Chem. 284, 17947-17955 (2009).</li><li>Underwood, K. F., D'Souza, D. R., Mochin, M. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulation+of+RUNX2+transcription+factor-DNA+interactions+and+cell+proliferation+by+Vitamin+D3+(cholecalciferol)+prohormone+activity.">Regulation of RUNX2 transcription factor-DNA interactions and cell proliferation by Vitamin D3 (cholecalciferol) prohormone activity.</a> J. Bone Miner Res. 27, 913-925 (2012).</li><li>Held, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kinetic+analysis+of+ß-galactosidase+activity+using+the+PowerWave+HT+and+Gen5+data+analysis+software:+basic+enzyme+kinetic+determinations.">Kinetic analysis of ß-galactosidase activity using the PowerWave HT and Gen5 data analysis software: basic enzyme kinetic determinations.</a> Biotek Instruments Application Note. , (2007).</li><li>Renard, P., Ernest, I., Houbion, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+sensitive+multi-well+colorimetric+assay+for+active+NFkappaB.">Development of a sensitive multi-well colorimetric assay for active NFkappaB.</a> Nucleic Acids Res. 29, E21 (2001).</li><li>Pommier, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+topoisomerase+I+inhibitors:+chemistry,+biology,+and+interfacial+inhibition.">DNA topoisomerase I inhibitors: chemistry, biology, and interfacial inhibition.</a> Chem Rev. 109, 2894-2902 (2009).</li><li>Pennisi, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genomics.+ENCODE+project+writes+eulogy+for+junk+DNA.">Genomics. ENCODE project writes eulogy for junk DNA.</a> Science. 337, 1159-1161 (2012).</li></ol>

We have nothing to disclose.

DNA-binding assays are used to measure the ability of transcription factors to interact with DNA. Assays for DNA binding include electrophoretic mobility shift (EMSA) 1 and chromatin immuneprecipitation (ChIP) based assays 3 as well as assays employing 96-well formats 4 such as chemiluminescent assays 2. The EMSA is non-quantitative and uses radiolabeled (32P) oligonucleotides. These are incubated with nuclear proteins and binding complexes are separated on agarose o...

DNA-binding assays have utility in measuring the ability of transcription factors to interact with DNA. Assays for DNA binding include electrophoretic mobility shift assays (EMSA) that depend on radiolabeled oligonucleotides 1 or chemiluminescence assays 2. Chromatin immuneprecipitation (ChIP) based assays 3 as well as assays employing 96-well formats 4 have also been described. However, the EMSA is a non-quantitative assay that requires the use of radiolabeled oligonucleotides. When nuclear proteins associate with the specific nucleotide promoter sequences, binding complexes are retarded on polyacrylamide gels and the specific transcription factor can be validated with an antibody "supershift". We have developed a quantitative DNA-binding assay using an enzyme-linked immunosorbent format (D-ELISA), which is able to measure the interaction of RUNX2 with DNA-binding sequences corresponding to defined promoter elements in RUNX2 target genes. Use of an anti-RUNX2 antibody provides specificity to the assay and the lack of radiolabel distinguish this assay from the traditional gel shift assay 5. Detection of binding complexes is possible with the use of a secondary antibody coupled to horseradish peroxidase (HRP), which converts an HRP substrate, tetramethyl benzidine (TMB) to a colored product for spectrophotometric analysis. The assay reported here can incorporate the use of mutated DNA oligonucleotides as controls and can be used for detection of competitive or non-competitive inhibitors of DNA binding. The screening of novel anti-tumor compounds is also possible with this assay.

<table border="1">
	<tbody>
		<tr>
			<td>Name of the Reagent</td>
			<td>Company</td>
			<td>Catalogue Number</td>
			<td>Comments (optional)</td>
		</tr>
		<tr>
			<td>Poly dI/dC</td>
			<td>GE Healthcare, Piscataway, NJ</td>
			<td>US20539-5UN</td>
			<td>1 U ~50mg</td>
		</tr>
		<tr>
			<td>RUNX2 antibody</td>
			<td>MBL International Corp., Woburn, MA</td>
			<td>D130-3</td>
			<td>1 mg/ml</td>
		</tr>
		<tr>
			<td>Fab-specific peroxidase conjugated antibody</td>
			<td>Sigma-Aldrich, St. Louis, MO</td>
			<td>A9917</td>
			<td>7.1 mg/ml</td>
		</tr>
		<tr>
			<td>TMB Substrate (tetramethyl benzidine)</td>
			<td>EXALPHA Biologicals, Shirley, MA</td>
			<td>X1189S</td>
			<td>100 ml</td>
		</tr>
		<tr>
			<td>Sodium carbonate</td>
			<td>Sigma-Aldrich, St. Louis, MO</td>
			<td>57995</td>
			<td>Plate-fixing</td>
		</tr>
		<tr>
			<td>Sulfuric Acid</td>
			<td>VWR, West Chester, PA</td>
			<td>BDH-39922-1</td>
			<td>Stop solution</td>
		</tr>
		<tr>
			<td>Multi-well plates</td>
			<td>Greiner Bio-One, Basel, Switzerland</td>
			<td>655996</td>
			<td>Avidin-coated, black sides</td>
		</tr>
		<tr>
			<td>HALT</td>
			<td>Thermo-Scientific/Pierce, Rockford, IL</td>
			<td>78440</td>
			<td>Protease and phosphatase inhibitors</td>
		</tr>
		<tr>
			<td>Chemicals</td>
			<td>Various manufacturers</td>
			<td>Laboratory grade</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>Table 1. Reagents</td>
		</tr>
		<tr>
			<td>Spectrophotometer: Biotrak II Visible plate reader</td>
			<td>Amersham Biosciences</td>
			<td>&nbsp;</td>
			<td>For use with stop reaction method</td>
		</tr>
		<tr>
			<td>Spectrophotometer: Bio-Tek Synergy HT Multi-reaction microplate reader</td>
			<td>Bio-Tek Instruments, Inc.</td>
			<td>&nbsp;</td>
			<td>For use with continuous kinetic monitoring</td>
		</tr>
		<tr>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>Table 2. Equipment</td>
		</tr>
	</tbody>
</table>

a quantitative assay to study protein:dna interactions, discover transcriptional regulators of gene expression, and identify novel anti-tumor agents

Many DNA-binding assays such as electrophoretic mobility shift assays (EMSA), chemiluminescent assays, chromatin immunoprecipitation (ChIP)-based assays, and multiwell-based assays are used to measure transcription factor activity. However, these assays are nonquantitative, lack specificity, may involve the use of radiolabeled oligonucleotides, and may not be adaptable for the screening of inhibitors of DNA binding. On the other hand, using a quantitative DNA-binding enzyme-linked immunosorbent assay (D-ELISA) assay, we demonstrate nuclear protein interactions with DNA using the RUNX2 transcription factor that depend on specific association with consensus DNA-binding sequences present on biotin-labeled oligonucleotides. Preparation of cells, extraction of nuclear protein, and design of double stranded oligonucleotides are described. Avidin-coated 96-well plates are fixed with alkaline buffer and incubated with nuclear proteins in nucleotide blocking buffer. Following extensive washing of the plates, specific primary antibody and secondary antibody incubations are followed by the addition of horseradish peroxidase substrate and development of the colorimetric reaction. Stop reaction mode or continuous kinetic monitoring were used to quantitatively measure protein interaction with DNA. We discuss appropriate specificity controls, including treatment with non-specific IgG or without protein or primary antibody. Applications of the assay are described including its utility in drug screening and representative positive and negative results are discussed.

The D-ELISA method is highly specific for the designated DNA-binding protein as long as a sequence-specific, double-stranded oligonucleotide containing three copies of the consensus RUNX2 binding site (ACACCA) is used. The primary antibody recognizing the protein factor also enhances the specificity. The secondary antibody contains covalently-linked horseradish peroxidase (HRP) that converts a clear substrate (tetramethyl benzidine) to a colored product for ease of detection (Figure 1). For these reasons...

Watch this Scientific Journal Video about A Quantitative Assay to Study Protein:DNA Interactions, Discover Transcriptional Regulators of Gene Expression, and Identify Novel Anti-tumor Agents at JoVE.c

A Quantitative Assay to Study Protein:DNA Interactions, Discover Transcriptional Regulators of Gene Expression, and Identify Novel Anti-tumor Agents

We developed a quantitative DNA-binding, ELISA-based assay to measure transcription factor interactions with DNA. High specificity for the RUNX2 protein was achieved with a consensus DNA-recognition oligonucleotide and specific monoclonal antibody. Colorimetric detection with an enzyme-coupled antibody substrate reaction was monitored in real time.

Many DNA-binding assays such as electrophoretic mobility shift assays (EMSA), chemiluminescent assays, chromatin immunoprecipitation (ChIP)-based assays, ...

a-quantitative-assay-to-study-proteindna-interactions-discover

Research

JoVE Journal

Biology

18.5K Views.  University of Maryland School of Medicine. We developed a quantitative DNA-binding, ELISA-based assay to measure transcription factor interactions with DNA. High specificity for the RUNX2 protein was achieved with a consensus DNA-recognition oligonucleotide and specific monoclonal antibody. Colorimetric detection with an enzyme-coupled antibody substrate reaction was monitored in real time.

Video: A Quantitative Assay to Study Protein:DNA Interactions, Discover Transcriptional Regulators of Gene Expression, and Identify Novel Anti-tumor Agents