We would like to thank Dr. Julia Fine for her ideas and discussion during the protocol creation process, as well as Dr. Cassondra Vernier for her helpful comments throughout editing. These materials contributed towards projects that were supported in part by the Foundation for Food and Agriculture Research, under grant ID 549025.

The authors have nothing to disclose.

Here we have outlined methods detailing every step of the virus amplification and inoculum stock preparation process, including larvae collection and virus propagation, extraction, and concentration, as well as viral treatment in the form of cage-feeding experiments. These methods allow for production of semi-pure virus particles (Figure 4), the effectiveness of which can be consistently be quantified by dose-response mortality testing for viruses that are lethal to adults (<strong class="xf...

Honey bees (Apis mellifera) play a critical role in the modern global agricultural landscape but are currently suffering from a combination of biotic and abiotic stressors, including pesticide exposure, poor forage, parasites, and pathogens1,2. One of the most important pathogens of concern are viruses, many of which are vectored by another of the major honey bee stressors, the parasitic Varroa mite (Varroa destructor). These viruses can cause an array of negative effects in honey bees including reduced brood survival, developmental defects, and paralysis that can lead to total hive collapse both before and after overwintering periods3,4,5. Although there have been promising advances in the development of technologies used to combat virus infection6,7,8,9, the dynamics by which many viruses propagate, spread, and interact within a honey bee or colony are still poorly understood5,10. Understanding the basic biology of honey bee and virus interactions and their relationships with other environmental factors is critical for developing effective virus management techniques.
However, studying honey bee-virus interactions poses challenges with numerous known and unknown factors complicating the process. These include interactions with diet11,12, pesticide exposure13, and bee genetic background14,15. Even when focusing on virus infection alone, complications are common because honey bee populations, both managed and wild, always have some degree of background virus infection, though often without manifesting acute symptoms16,17, and the effects of virus coinfection are not well understood18. This has made the study of honey bee virus effects difficult to disentangle.
Many honey bee virus studies have used circumstantial virus infections to look for interactions with other stressors, observing how background infections change with other treatments12,19,20,21. While this approach has been successful at identifying important effects, especially discovering how pesticide or dietary treatments affect virus levels and replication, inoculation with a virus treatment of known content and concentration is critical for experimental testing of virus infection dynamics. Even so, separating experimental treatment from background infection can also pose challenges. In field studies, researchers have differentiated strains of deformed wing virus (DWV) to provide evidence for virus transmission from honey bees to bumble bees22, but using this approach would be difficult within honey bees alone. Virus infectious clones are a powerful tool, not just for tracking infection23,24,25 but for reverse genetics studies of honey bee viruses and for virus-host interaction research26,27,28. However, in most instances, infectious clones are still required to fulfill the infection cycle inside cells to produce particles. Such particles are preferred as inocula for experimental treatments because their infectivity is higher than the naked viral RNA and inoculation with encapsidated genomes mimics a natural infection.
The production of pure, uncontaminated honey bee virus inocula (wild-type virus strains or those derived from infectious clones) also pose challenges. These are primarily due to the difficulties in obtaining a reliable, continuously-replicating, virus-free honey bee cell line to produce pure-strain viruses29,30. While some cell lines have been produced, these systems remain imperfect; still, there is hope a viable cell line can be produced29, which would allow for finer control of virus production and investigation. Until such a line becomes widely available, most virus production protocols will continue to rely on the use of in vivo virus production and purification18,31,32,33,34. These approaches involve identifying and purifying virus particles of interest (or producing an infectious clone) and using them to infect honey bees, usually as pupae. The pupae are injected with the target virus and then sacrificed, and further particles are extracted and purified. However, because no bees are virus-free to begin with, there is always some degree of contamination from traces of other viruses in any such concentrate, and, therefore, great care must be taken in choosing bees with a low likelihood of background infections. Further, methods for removing the pupae from the comb cells for use in these protocols33 are very labor intensive and can induce stress in the bees, limiting production by these means18,32. Here, we report an alternative method that allows for large scale removal of larvae with little labor and less mechanical stress on the bees.
Once pupae are obtained and injected with the starting virus inoculum, they must be incubated to provide the virus time to replicate. Subsequently, produced virus particles can be processed into a form usable to infect experimental bees. There are several simple methods to achieve this, including using a crude homogenate35,36 or hemolymph generated from virally infected bees as a source of infection37. These methods are effective but run into a greater chance of introducing unknown variables from the background substrate (e.g., other factors in the dead bee homogenates). Additionally, it is desirable to concentrate the particles if an experiment requires giving a large, known dose of a virus in a short period of time. Therefore, for better control, it is preferable to use methods that allow for some level of purification and concentration of the virus particles. Generally, a series of precipitation and centrifugation steps will result in the removal of almost all possible non-target virus material33.
After producing this concentrated inoculum, it is beneficial to quantify the viral titers (qPCR) and characterize it with in vivo bioassays to test its viability and ability to cause mortality, as well as to corroborate that increased virus titers are obtained after infection. This can be achieved through injection experiments (either into pupae or adults) or feeding experiments (into larvae or adults). While all these approaches are possible, feeding to groups of adult bees in a cage is often the fastest and simplest. The cage assay method is also widely used for testing various other treatments on bees including pesticide toxicity38, ovary development39, and nutritional influence on behavior40,41 and, therefore, can form a good basis for experiments linking virus infection with other factors42.
Here we describe a reliable method for producing large quantities of semi-pure, highly-enriched virus particles without using an expensive ultracentrifuge, including a method for removing pupae that reduces labor and mechanical stress on the bees and a highly repeatable, high-throughput bioassay for testing viral infection and effects. By tightly controlling the purity of the viral inocula, investigators are able to reduce variation in honey bee viral response relative to other viral inoculation methods. Furthermore, the bioassay can screen for viral effects at a small groups level using highly repeatable experimental units before scaling to field-realistic settings, which is far more labor intensive to manage. In combination, these two methods provide the necessary tools for studies that can help improve our overall understanding of honey bee-virus physiological interactions.

<table>
	<tbody>
		<tr>
			<td>10% bleach solution</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>24:1 chloroform:isoamyl alcohol</td>
			<td>SigmaAldrich</td>
			<td>C0549</td>
			<td></td>
		</tr>
		<tr>
			<td>70% ethanol solution</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Cages for bioassay</td>
			<td></td>
			<td></td>
			<td>Dependent on experimental setup</td>
		</tr>
		<tr>
			<td>Combitips Advanced 0.1 mL</td>
			<td>Eppendorf</td>
			<td>30089405</td>
			<td>Optional (if no injector appartus is available)</td>
		</tr>
		<tr>
			<td>Containers for larval self-removal</td>
			<td></td>
			<td></td>
			<td>Should measure roughly 19&#34; x 9-1/8&#34; (Langstroth deep frame dimensions)</td>
		</tr>
		<tr>
			<td>Forceps</td>
			<td></td>
			<td></td>
			<td>Blunt, soft forceps for larval separationl; blunt, hard forceps for pupal excision</td>
		</tr>
		<tr>
			<td>Fume hood</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Incubator</td>
			<td></td>
			<td></td>
			<td>Capable of maintaining 34 &#186;C and 50% relative humidity</td>
		</tr>
		<tr>
			<td>Kimwipes</td>
			<td>Fisher Scientific</td>
			<td>06-666</td>
			<td>Any absorbent wipe will work</td>
		</tr>
		<tr>
			<td>Medium-sized weight boats</td>
			<td></td>
			<td></td>
			<td>Serve as inoculum trays</td>
		</tr>
		<tr>
			<td>Microcon-100kDa with Biomax membrane</td>
			<td>MilliporeSigma</td>
			<td>MPE100025</td>
			<td></td>
		</tr>
		<tr>
			<td>NaCl</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Nitrile gloves</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Phosphate buffered saline (PBS)</td>
			<td>SigmaAldrich</td>
			<td>P5119</td>
			<td></td>
		</tr>
		<tr>
			<td>Polyethylene glycol 8000 (PEG)</td>
			<td>SigmaAldrich</td>
			<td>1546605</td>
			<td></td>
		</tr>
		<tr>
			<td>Refrigerated benchtop centrifuge</td>
			<td></td>
			<td></td>
			<td>Capable of 15,000 x g</td>
		</tr>
		<tr>
			<td>Refrigerated centrifuge</td>
			<td></td>
			<td></td>
			<td>Capable of 21,000 x g</td>
		</tr>
		<tr>
			<td>Repeater M4 Multipipette</td>
			<td>Eppendorf</td>
			<td>4982000322</td>
			<td>Optional (if no injector appartus is available)</td>
		</tr>
		<tr>
			<td>RNAse Away</td>
			<td>ThermoFisher</td>
			<td>7000TS1</td>
			<td></td>
		</tr>
		<tr>
			<td>RNAse-free water</td>
			<td>SigmaAldrich</td>
			<td>W4502</td>
			<td></td>
		</tr>
		<tr>
			<td>Sucrose</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>TES</td>
			<td>SigmaAldrich</td>
			<td>T1375</td>
			<td></td>
		</tr>
	</tbody>
</table>

preparation of virus-enriched inoculum for oral infection of honey bees (apis mellifera)

Honey bees are of great ecological and agricultural importance around the world but are also subject to a variety of pressures that negatively affect bee health, including exposure to viral pathogens. Such viruses can cause a wide variety of devastating effects and can often be challenging to study due to multiple factors that make it difficult to separate the effects of experimental treatments from preexisting background infection. Here we present a method to mass produce large quantities of virus particles along with a high throughput bioassay to test viral infection and effects. Necessitated by the current lack of a continuous, virus-free honey bee cell line, viral particles are amplified in vivo using honey bee pupae, which are extracted from the hive in large volumes using minimally stressful methodology. These virus particles can then be used in honey bee cage bioassays to test inocula viability, as well as various other virus infection dynamics, including interactions with nutrition, pesticides, and other pathogens. A major advantage of using such particles is that it greatly reduces the chances of introducing unknown variables in subsequent experimentation when compared to current alternatives, such as infection via infected bee hemolymph or homogenate, though care should still be taken when sourcing the bees, to minimize background virus contamination. The cage assays are not a substitute for large-scale, field-realistic experiments testing virus infection effects at a colony level, but instead function as a method to establish baseline viral responses that, in combination with the semi-pure virus particles, can serve as important tools to examine various dimensions of honey bee-virus physiological interactions.

Successfully following the protocols (Figures 1) for pupal injection and viral extraction should produce large quantities of virus particles. However, sampling and injecting pupae sourced from a variety of colonies at multiple time points maximizes the chances of acquiring target virus with low contamination. The dynamics by which viruses replicate and interact with one another within a honey bee is not well understood; coupled with the likelihood for preexisting infection, there is no guarantee that the...

Watch this Scientific Journal Video about Preparation of Virus-Enriched Inoculum for Oral Infection of Honey Bees Apis mellifera at JoVE.com

Preparation of Virus-Enriched Inoculum for Oral Infection of Honey Bees Apis mellifera

Here we describe two protocols: first to propagate, extract, purify, and quantify large quantities of honey bee non-enveloped virus particles, including a method for removing honey bee pupae and second to test the effects of viral infection using a highly repeatable, high-throughput cage bioassay.

Preparation of Virus-Enriched Inoculum for Oral Infection of Honey Bees (Apis mellifera)

Honey bees are of great ecological and agricultural importance around the world but are also subject to a variety of pressures that negatively affect bee ...

preparation-virus-enriched-inoculum-for-oral-infection-honey-bees

Research

JoVE Journal

Biology

2.8K Views.  University of Illinois. Here we describe two protocols: first to propagate, extract, purify, and quantify large quantities of honey bee non-enveloped virus particles, including a method for removing honey bee pupae and second to test the effects of viral infection using a highly repeatable, high-throughput cage bioassay.

Video: Preparation of Virus-Enriched Inoculum for Oral Infection of Honey Bees Apis mellifera

Protocols for Oral Infection of Lepidopteran Larvae with Baculovirus

Baculoviruses are widely used both as protein expression vectors and as insect pest control agents. This video shows how lepidopteran larvae can be infected with polyhedra by droplet feeding and diet plug-based bioassays. This accompanying Springer Protocols section provides an overview of the baculovirus lifecycle and use of baculoviruses as insecticidal agents, including discussion of the pros and cons for use of baculoviruses as insecticides, and progress made in genetic enhancement of baculoviruses for improved insecticidal efficacy.

In this video, we demonstrate oral infection techniques of lepidopteran larvae with baculovirus in order to determine insecticidal efficiency.

Baculoviruses are widely used both as protein expression vectors and as insect pest control agents. This video shows how lepidopteran larvae can be ...

Extraction of the EPP Component from the Surface EMG

A surface electromyogram (EMG), especially when recorded near the neuromuscular junction, is expected to contain the endplate potential (EPP) component which can be extracted with an appropriate signal filter. Two factors are important: the EMG must be recorded in monopolar fashion, and the recording must be done so the low frequency signal corresponding the EPP is not eliminated. This report explains how to extract the EPP component from the EMG of the masseter muscle in a human subject. The surface EMG is recorded from eight sites using traditional disc electrodes aligned along over the muscle, with equal inter-electrode distance from the zygomatic arch to the angle of mandible in response to quick gum clenching. A reference electrode is placed on the tip of the nose. The EPP component is extracted from the raw EMGs by applying a high-cut digital filter (2nd dimension Butterworth filter) with a range of 10-35 Hz. When the filter is set to 10 Hz, the extracted EPP wave deflects either negative or positive depending on the recording site. The difference in the polarity reflects the sink-source relation of the end plate current, with the site showing the most negative deflection corresponding to the neuromuscular junction. In the case of the masseter muscle, the neuromuscular junction is estimated to be located in the inferior portion close to the angle of mandible. The EPP component exhibits an interesting oscillation when the cut-off frequency of the high-cut digital filter is set to 30 Hz. The EPP oscillation indicates that muscle contraction is adjusted in an intermittent manner. Abnormal tremors accompanying various sorts of diseases may be substantially due to this EPP oscillation, which becomes slower and is difficult to cease.

The endplate potential (EPP) component can be extracted from the surface EMG using a digital filter. The extracted EPP shows oscillation with a frequency of about 30 Hz.

A surface electromyogram (EMG), especially when recorded near the neuromuscular junction, is expected to contain the endplate potential (EPP) component ...

Derivation of Mouse Trophoblast Stem Cells from Blastocysts

Specification of the trophectoderm is one of the earliest differentiation events of mammalian development. The trophoblast lineage derived from the trophectoderm mediates implantation and generates the fetal part of the placenta. As a result, the development of this lineage is essential for embryo survival. Derivation of trophoblast stem (TS) cells from mouse blastocysts was first described by Tanaka et al. 1998. The ability of TS cells to preserve the trophoblast specific property and their expression of stage- and cell type-specific markers after proper stimulation provides a valuable model system to investigate trophoblast lineage development whereby recapitulating early placentation events. Furthermore, trophoblast cells are one of the few somatic cell types undergoing natural genome amplification. Although the molecular pathways underlying trophoblast polyploidization have begun to unravel, the physiological role and advantage of trophoblast genome amplification remains largely elusive. The development of diploid stem cells into polyploid trophoblast cells in culture makes this ex vivo system an excellent tool for elucidating the regulatory mechanism of genome replication and instability in health and disease. Here we describe a protocol based on previous reports with modification published in Chiu et al. 2008.

In this video, we demonstrate the isolation of mouse blastocysts and the derivation of trophoblast stem cells from blastocysts. We also describe conditions for maintenance of the stem cell property as well as induction of differentiation in culture.

Specification of the trophectoderm is one of the earliest differentiation events of mammalian development. The trophoblast lineage derived from the ...

Preparation of Pancreatic Acinar Cells for the Purpose of Calcium Imaging, Cell Injury Measurements, and Adenoviral Infection

The pancreatic acinar cell is the main parenchymal cell of the exocrine pancreas and plays a primary role in the secretion of pancreatic enzymes into the pancreatic duct. It is also the site for the initiation of pancreatitis. Here we describe how acinar cells are isolated from whole pancreas tissue and intracellular calcium signals are measured. In addition, we describe the techniques of transfecting these cells with adenoviral constructs, and subsequently measuring the leakage of lactate dehydrogenase, a marker of cell injury, during conditions that induce acinar cell injury in vitro. These techniques provide a powerful tool to characterize acinar cell physiology and pathology.

We describe a reproducible method of preparing mouse pancreatic acinar cells from a mouse for the purpose of examining acinar cell calcium signals and cellular injury with physiologically and pathologically relevant stimuli. A method for adenoviral infection of these cells is also provided.

The pancreatic acinar  cell is the main parenchymal cell of the exocrine pancreas and plays a primary  role in the secretion of pancreatic enzymes into ...

Methods for Comparing Nutrients in Beebread Made by Africanized and European Honey Bees and the Effects on Hemolymph Protein Titers

Honey bees obtain nutrients from pollen they collect and store in the hive as beebread. We developed methods to control the pollen source that bees collect and convert to beebread by placing colonies in a specially constructed enclosed flight area. Methods were developed to analyze the protein and amino acid composition of the pollen and beebread. We also describe how consumption of the beebread was measured and methods used to determine adult worker bee hemolymph protein titers after feeding on beebread for 4, 7 and 11 days after emergence. Methods were applied to determine if genotype affects the conversion of pollen to beebread and the rate that bees consume and acquire protein from it. Two subspecies (European and Africanized honey bees; EHB and AHB respectively) were provided with the same pollen source. Based on the developed methods, beebread made by both subspecies had lower protein concentrations and pH values than the pollen. In general, amino acid concentrations in beebread made by either EHB or AHB were similar and occurred at higher levels in beebread than in pollen. Both AHB and EHB consumed significantly more of the beebread made by AHB than by EHB. Though EHB and AHB consumed similar amounts of each type of beebread, hemolymph protein concentrations in AHB were higher than in EHB. Differences in protein acquisition between AHB and EHB might reflect environmental adaptations related to the geographic region where each subspecies evolved. These differences could contribute to the successful establishment of AHB populations in the New World because of the effects on brood rearing and colony growth.

Here are methods to quantify nutrients in pollen before and after its conversion to beebread by two subspecies of honeybees. We describe techniques to measure beebread consumption and resulting protein titers in both subspecies.

Honey bees obtain nutrients from pollen they collect and store in the hive as beebread. We developed methods to control the pollen source that bees ...

Bone Conditioned Medium: Preparation and Bioassay

Autologous bone grafts are widely used in oral and maxillofacial surgery, orthopedics, and traumatology. Autologous bone grafts not only replace missing bone, they also support the complex process of bone regeneration. This favorable behavior of autografts is attributed to the three characteristics: osteoconductivity, osteogenicity, and osteoinductivity. However, there is another aspect: Bone grafts release a myriad of molecules, including growth factors, which can target mesenchymal cells involved in bone regeneration. The paracrine properties of bone grafts can be studied in vitro by the use of bone-conditioned medium (BCM). Here we present a protocol on how to prepare bone-conditioned medium from native pig cortical bone, and bone that underwent thermal processing or demineralization. Cells can be directly exposed to BCM or seeded onto biomaterials, such as collagen membranes, previously soaked with BCM. We give examples for in vitro bioassays with mesenchymal cells on the expression of TGF-&#946; regulated genes. The presented protocols should encourage to further reveal the paracrine effects of bone grafts during bone regeneration and open a path for translational research in the broad field of reconstructive surgery.

We describe here how to prepare bone-conditioned medium (BCM) and test its activity in vitro.

Autologous bone grafts are widely used in oral and maxillofacial surgery, orthopedics, and traumatology. Autologous bone grafts not only replace missing ...

Dissection and Observation of Honey Bee Dorsal Vessel for Studies of Cardiac Function

The European honey bee, Apis mellifera L., is a valuable agricultural and commercial resource noted for producing honey and providing crop pollination services, as well as an important model social insect used to study memory and learning, aging, and more. Here we describe a detailed protocol for the dissection of the dorsal abdominal wall of a bee in order to visualize its dorsal vessel, which serves the role of the heart in the insect. A successful dissection will expose a functional heart that, under the proper conditions, can maintain a steady heartbeat for an extended period of time. This allows the investigator to manipulate heart rate through the application of cardiomodulatory compounds to the dorsal vessel. By using either a digital microscope or a microscope equipped with a digital camera, the investigator can make video recordings of the dorsal vessel before and after treatment with test compounds. The videos can then be scored at a time convenient to the user in order to determine changes in heart rate, as well as changes in the pattern of heartbeats, following treatment. The advantages of this protocol are that it is relatively inexpensive to set up, easy to learn, requires little space or equipment, and takes very little time to conduct.

The abdominal dorsal vessel of the honey bee and other insects serves as the functional equivalent of the mammalian heart and plays an important role in nutrient transport, waste removal, immune function, and more. Here we describe a protocol for the visualization and pharmacological manipulation of bee heart rate.

The European honey bee, Apis mellifera L., is a valuable agricultural and commercial resource noted for producing honey and providing crop pollination ...

Monitoring Colony-level Effects of Sublethal Pesticide Exposure on Honey Bees

The effects of sublethal pesticide exposure to honey bee colonies may be significant but difficult to detect in the field using standard visual assessment methods. Here we describe methods to measure the quantities of adult bees, brood, and food resources by weighing hives and hive parts, by photographing frames, and by installing hives on scales and with internal sensors. Data from these periodic evaluations are then combined with running average and daily detrended data on hive weight and internal hive temperature. The resulting datasets have been used to detect colony-level effects of imidacloprid applied in a sugar syrup as low as 5 parts per billion. The methods are objective, require little training, and provide permanent records in the form of sensor output and photographs.

Sublethal doses of pesticides may affect colonies in ways that are difficult to detect using only periodic or visual methods. Methods to measure total adult bee mass, brood, and food resources by weighing hives and hive parts, photographing frames, and installing sensors, are provided. Data analysis is also addressed.

The effects of sublethal pesticide exposure to honey bee colonies may be significant but difficult to detect in the field using standard visual assessment ...

Micromanipulation Techniques Allowing Analysis of Morphogenetic Dynamics and Turnover of Cytoskeletal Regulators

Examining the spatiotemporal dynamics of proteins can reveal their functional importance in various contexts. In this article, it is discussed how fluorescent recovery after photobleaching (FRAP) and photoactivation techniques can be used to study the spatiotemporal dynamics of proteins in subcellular locations. We also show how these techniques enable straightforward determination of various parameters linked to actin cytoskeletal regulation and cell motility. Moreover, the microinjection of cells is additionally described as an alternative treatment (potentially preceding or complementing the aforementioned photomanipulation techniques) to trigger instantaneous effects of translocated proteins on cell morphology and function. Micromanipulation such as protein injection or local application of plasma membrane-permeable drugs or cytoskeletal inhibitors can serve as powerful tool to record immediate consequences of a given treatment on cell behavior at the single cell and subcellular level. This is exemplified here by immediate induction of lamellipodial cell edge protrusion by the injection of recombinant Rac1 protein, as established a quarter-century ago. In addition, we provide a protocol for determining the turnover of enhanced green fluorescent protein (EGFP)-VASP, an actin filament polymerase prominently accumulating at lamellipodial tips of B16-F1 cells, employing FRAP and including associated data analysis and curve fitting. We also present guidelines for estimating the rates of lamellipodial actin network polymerization, as exemplified by cells expressing EGFP-tagged &#946;-actin. Finally, instructions are given for how to investigate the rates of actin monomer mobility within the cell cytoplasm, followed by actin incorporation at sites of rapid filament assembly, such as the tips of protruding lamellipodia, using photoactivation approaches. None of these protocols is&#160;restricted to components or regulators of the actin cytoskeleton, but can easily be extended to explore in analogous fashion the spatiotemporal dynamics and function of proteins in various different subcellular structures or functional contexts.

We describe how micro- and photomanipulation techniques such as FRAP and photoactivation enable the determination of motility parameters and the spatiotemporal dynamics of proteins within migrating cells. Experimental readouts include subcellular dynamics and turnover of motility regulators or of the underlying actin cytoskeleton.

Examining the spatiotemporal dynamics of proteins can reveal their functional importance in various contexts. In this article, it is discussed how ...

Oral Bacterial Infection and Shedding in Drosophila melanogaster

The fruit fly Drosophila melanogaster is one of the best developed model systems of infection and innate immunity. While most work has focused on systemic infections, there has been a recent increase of interest in the mechanisms of gut immunocompetence to pathogens, which require methods to orally infect flies. Here we present a protocol to orally expose individual flies to an opportunistic bacterial pathogen (Pseudomonas aeruginosa) and a natural bacterial pathogen of D. melanogaster (Pseudomonas entomophila). The goal of this protocol is to provide a robust method to expose male and female flies to these pathogens. We provide representative results showing survival phenotypes, microbe loads, and bacterial shedding, which is relevant for the study of heterogeneity in pathogen transmission. Finally, we confirm that Dcy mutants (lacking the protective peritrophic matrix in the gut epithelium) and Relish mutants (lacking a functional immune deficiency (IMD) pathway), show increased susceptibility to bacterial oral infection. This protocol, therefore, describes a robust method to infect flies using the oral route of infection, which can be extended to the study of a variety genetic and environmental sources of variation in gut infection outcomes and bacterial transmission.

Oral Bacterial Infection and Shedding in Drosophila melanogaster

This protocol describes methods to orally expose and infect the fruit fly Drosophila melanogaster with bacterial pathogens, and to measure the number of infectious bacteria shed following gut infection. We further describe the effect of immune mutants on fly survival following oral bacterial infection.

The fruit fly Drosophila melanogaster is one of the best developed model systems of infection and innate immunity. While most work has focused on systemic ...

Preparation of Virus-Enriched Inoculum for Oral Infection of Honey Bees (Apis mellifera)

Podsumowanie

Przeglądaj więcej filmów

Rozdziały w tym wideo

Protocols for Oral Infection of Lepidopteran Larvae with Baculovirus

Extraction of the EPP Component from the Surface EMG

Derivation of Mouse Trophoblast Stem Cells from Blastocysts

Preparation of Pancreatic Acinar Cells for the Purpose of Calcium Imaging, Cell Injury Measurements, and Adenoviral Infection

Methods for Comparing Nutrients in Beebread Made by Africanized and European Honey Bees and the Effects on Hemolymph Protein Titers

Bone Conditioned Medium: Preparation and Bioassay

Dissection and Observation of Honey Bee Dorsal Vessel for Studies of Cardiac Function

Monitoring Colony-level Effects of Sublethal Pesticide Exposure on Honey Bees

Micromanipulation Techniques Allowing Analysis of Morphogenetic Dynamics and Turnover of Cytoskeletal Regulators

Oral Bacterial Infection and Shedding in Drosophila melanogaster