Name: hybrid-cut: an improved sectioning method for recalcitrant plant tissue samples
Uploaded: 2016-11-23T15:00:00
Duration: 9 min 38 s
Description: Watch this Scientific Journal Video about Hybrid-Cut: An Improved Sectioning Method for Recalcitrant Plant Tissue Samples at JoVE.com

We are grateful to the technical support from Ms. Hong Xian Hsing, Mr. Min Jeng Li, and Mr. Eric C. P. Wu. We express our appreciation to Miranda Loney for English editing.

1. Fixation and Embedding
<ol>
	<li>Reagent preparation
	<ol>
		<li>10x Phosphate-buffered saline (PBS)
		<ol>
			<li>Add 80 g NaCl, 2 g KCl, 14.4 g Na2HPO4, and 2.4 g KH2PO4 in 800 ml double distilled water (ddH2O) and adjust the pH to 7.4 with HCl. Add ddH2O to a total volume of 1 L, then add 1,000 &#181;l diethyl pyrocarbonate (DEPC) and shake vigorously. Store PBS overnight at room temperature and autoclave at 121 &#176;C for 20 min the following day.</li>
		</ol>
		</li>
		<li>1x PBS
		<ol>
			<li>Dilute the stock 10x PBS at 1:10 ratio in ddH2O to obtain a final concentration of 0.01 M Na2HPO4, 0.002 M KH2PO4, 0.003 M KCl, and 0.13 M NaCl.</li>
		</ol>
		</li>
		<li>Paraformaldehyde (PFA) fixative 
		Caution: Paraformaldehyde is toxic. Prepare it under a fume hood. Wear gloves.
		<ol>
			<li>To prepare 250 ml PFA fixative, heat 100 ml 1x PBS to 70 - 80 &#176;C and add 1,750 &#181;l of NaOH. Then add 10 g of paraformaldehyde and mix thoroughly until dissolved. Place the solution on ice and then adjust the pH to 7.2 with H2SO4 (260 - 270 &#181;l for 100 ml) after cooling.</li>
			<li>Adjust the volume to 250 ml with 1x PBS, add 625 &#181;l glutaraldehyde to a final concentration of 0.25%. Add 250 &#181;l Triton X-100 and 250 &#181;l Tween 20 to facilitate the infiltration of the fixative. 
			NOTE: The PFA fixative can be stored at 4 &#176;C for one month without losing its fixation ability.</li>
		</ol>
		</li>
		<li>Prepare different concentrations of ethanol (30%, 50%, 70%, 85%, and 95%) with DEPC-treated water.</li>
	</ol>
	</li>
	<li>Plant sample collection
	<ol>
		<li>Axillary buds
		<ol>
			<li>Use mature Phalaenopsis orchid plants at the four-leaf stage. Carefully remove leaves by tearing the leaf following the midrib using hands.</li>
			<li>Use a sharp scalpel to carefully remove axillary buds from the base of the third or fourth leaf on the monopodial stem.</li>
		</ol>
		</li>
		<li>Seed sample
		<ol>
			<li>Harvest mature orchid seed pods at 4 months after pollination. Cut seed pods longitudinally with a scalpel. Shake the opening seed pod gently and release the dry seeds on filter paper.</li>
		</ol>
		</li>
		<li>Protocorm
		<ol>
			<li>Sow mature orchid seeds on a 1/2x Murashige and Skoog agar plate, and grow in a tissue culture room in a 12 hr light period and constant temperature of 25 &#176;C. Sample green protocorm at 7 weeks after sowing.</li>
		</ol>
		</li>
		<li>Protocorm-like bodies (PLBs)
		<ol>
			<li>Grow orchid PLBs on T2 regenerating agar plates as described previously 10 and place under the same growth conditions as in the step 1.2.3.1. Collect 10 PLBs at a height of 5 - 8 mm.</li>
		</ol>
		</li>
		<li>Leaf sample
		<ol>
			<li>Collect leaf tissue from a mature Phalaenopsis orchid plant as described in step 1.2.1.1.</li>
			<li>Use a sharp scalpel to cut a small piece of leaf tissue (7 mm length x 5 mm width) from the second newly developed leaf.</li>
		</ol>
		</li>
		<li>Root sample
		<ol>
			<li>Using the same plant described in the step 1.2.1.1, dissect 1 cm length of root tip tissue using a sharp scalpel.</li>
		</ol>
		</li>
		<li>Young spike
		<ol>
			<li>Use a sharp scalpel to cut young spike tissue from the tip portion of the flower stalk 10 cm in length.</li>
		</ol>
		</li>
		<li>Flower bud
		<ol>
			<li>Excise a small flower bud of 5 mm in diameter from orchid flower stalk. Cut part of the flower bud tissue longitudinally (3 mm in thickness).</li>
		</ol>
		</li>
		<li>Leaf tissues and spikelet tissues of cereal crops
		<ol>
			<li>Cut 1 cm length leaf blade tissue from the first newly developed leaves from rice, wheat and maize plants.</li>
			<li>Collect 10 spikelets from plants (rice, wheat and maize) one day before anthesis.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Fixation
	<ol>
		<li>Fix plant samples immediately by transferring them into a glass scintillation vial containing 15 ml ice-cold PFA fixative.</li>
		<li>Apply a vacuum (~ 720 mm Hg) to plant samples in a 4 &#176;C cool room. Hold the vacuum for 15 - 20 min (small bubbles should be released from the samples). Repeat this step until most of the tissues sink after release of vacuum. Hold the vacuum overnight and release the vacuum slowly the next day.</li>
	</ol>
	</li>
	<li>Dehydration 
	NOTE: Use the same vial from the fixation through the infiltration steps. Pour or use a pipette to drain off the solution in the previous step and replace with 15 ml of new solution into the vial. Depending on the texture of tissues, treat harder tissues such as orchid axillary bud, seed, protocorm, and PLB, and the spikelet of rice, wheat, and maize for a longer time; treat softer tissues such as orchid flower bud, young spike, leaf and root, and the leaf of rice, wheat, and maize for a shorter time.
	<ol>
		<li>After fixation, immerse the sample in 15 ml 1x PBS for 10 min on ice.
		<ol>
			<li>Dehydrate samples in 15 ml ethanol series at room temperature as follows: 30% ethanol for 30 min, 50% ethanol for 30 min, 70% ethanol for 1 hr, 85% ethanol for 54 min for harder tissues and 30 min for softer tissues, 95% ethanol for 54 min for harder tissues and 30 min for softer tissues, and 100% ethanol twice for 54 min for harder tissues and 30 min for softer tissues. 
			NOTE: Plant samples can be stored in 70% ethanol at 4 &#176;C for several months.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Paraffin infiltration
	<ol>
		<li>Infiltrate samples with 15 ml ethanol and xylene substitute mixture for 54 min each for harder tissues and 30 min for softer tissues, at room temperature as follows: ethanol/xylene substitute (2:1, v/v), ethanol/xylene substitute (1:1, v/v), ethanol/xylene substitute (1:2, v/v), and pure xylene substitute twice. Caution: Xylene is toxic. Do this step in fume hood.</li>
		<li>Infiltrate sample in the vial with 15 ml xylene substitute and paraffin mixture in an oven at 60 &#176;C, overnight for harder tissues, and for 60 min for softer tissues as follows: xylene substitute/paraffin (2:1, v/v), xylene substitute/paraffin (1:1, v/v), and xylene substitute/paraffin (1:2, v/v).</li>
		<li>Infiltrate sample with 15 ml pure paraffin twice a day and incubate at 60 &#176;C in an oven.</li>
		<li>Repeat step 1.5.3 the next day.</li>
	</ol>
	</li>
	<li>Tissue embedding
	<ol>
		<li>Switch on the power of the tissue embedding center 1 hr in advance to melt the wax in the paraffin reservoir before embedding tissues in a paraffin block.</li>
		<li>Warm up the metal molds (size of base 3.3 cm length x 2 cm width) on the warming tray at 62 &#176;C, and pour approximately 13 ml of molten wax into the mold base.</li>
		<li>Transfer one tissue sample from section 1.5.4 into the mold with warmed forceps and orient it into the desired position.</li>
		<li>Move the mold onto the cool plate carefully, and leave until the wax is solidified.</li>
	</ol>
	</li>
</ol>
2. Tissue Sectioning
<ol>
	<li>Paraffin sectioning method
	<ol>
		<li>Make a wax base by placing an embedding cassette on the top of a mold (same size in the section 1.6.2), fill with molten wax and remove the mold after the wax is solidified. 
		NOTE: The embedding cassette will form a wax base to anchor the sample paraffin block.</li>
		<li>Trim the paraffin block into an appropriate shape and size, and place some wax pieces on a flat spatula. Heat the wax pieces using an alcohol burner until the wax melts and then place the molten wax on the wax base in section 2.1.1 to adhere the block. Clamp it in the microtome.</li>
		<li>Place a new blade onto the microtome, and adjust the angle to 5 degrees to facilitate the sectioning in the microtome.</li>
		<li>Cut the sample paraffin block into thin slices (10 &#181;m), as described previously 11.</li>
	</ol>
	</li>
	<li>Hybrid-Cut sectioning method
	<ol>
		<li>Trim the sample paraffin block from step 1.6.4 to a column with a trapezoid surface at the top to an appropriate size using a razor blade.</li>
		<li>Add some Optimal Cutting Temperature compound (OCT) to the center of the cryostat stage. Attach the paraffin block to the cryostat stage and then quickly orient the tissue block into the desired position.</li>
		<li>Transfer the paraffin block/stage to a cryostat chamber. Allow OCT to solidify on quick freeze bar at -42 &#176;C for 10 min. Do not move the block during solidification of OCT (Figure 2C).</li>
		<li>Allow the cryostat adaptor and chamber temperature to cool down to -20 &#176;C and -16 &#176;C respectively before attaching the paraffin block/stage to the cryostat adaptor. Section tissues to 10 &#181;m in thickness.</li>
		<li>Pick tissue sections with forceps. Float the sections on 800 &#181;l DEPC-treated water in a Poly-L-lysine coated slide and transfer the slides onto a hot plate at 42 &#176;C.</li>
		<li>Allow the sections to flatten on DEPC-treated water at 42 &#176;C. Use filter paper to drain off the water from the edge.</li>
		<li>Mount tissue on the slide by placing the slide on a 42 &#176;C hot plate overnight.</li>
	</ol>
	</li>
</ol>
3. Tissue Staining
<ol>
	<li>Deparaffinization
	<ol>
		<li>Collect the slides from the hot plate and place them in a staining rack. Add 150 ml xylene into a staining jar in fume hood and immerse the rack in xylene for 5 min.</li>
	</ol>
	</li>
	<li>Rehydration
	<ol>
		<li>Prepare different concentrations of ethanol solutions (100%, 95%, 70%, 50%, and 30%) in DEPC-treated water and fill 150 ml of solution into distinct staining jars, respectively.</li>
		<li>Rehydrate the samples through a series of decreasing ethanol concentration, each step for 3 min at room temperature. Transfer the slides in the staining rack one jar to another jar containing different ethanol concentrations: 100% Ethanol, 95% Ethanol, 70% Ethanol, 50% Ethanol, and 30% Ethanol.</li>
		<li>After rehydration, immerse the specimens in ddH2O for 3 min.</li>
	</ol>
	</li>
	<li>Hematoxylin staining
	<ol>
		<li>Stain tissue samples by immersing tissue slides in hematoxylin solution for 1.5 min.</li>
		<li>Rinse briefly in ddH2O containing 1 - 2 drops of 12 N hydrochloric acid (HCl) for a few seconds, and then wash briefly in ddH2O.</li>
	</ol>
	</li>
	<li>Dehydration
	<ol>
		<li>Dehydrate the samples through a series of increasing ethanol concentrations for 3 min at room temperature: 30% Ethanol, 50% Ethanol, 70% Ethanol, 95% Ethanol, and 100% Ethanol. Clear the specimens with xylene in the fume hood for 5 min.</li>
	</ol>
	</li>
	<li>Mounting
	<ol>
		<li>Drop appropriately 600 &#956;l of xylene-based mounting medium onto slide. Carefully place a coverslip over the specimen. Avoid air bubbles forming to get good quality images.</li>
		<li>Allow the slides to air dry overnight. Observe the specimen under a microscope the next day. 
		Note: Images were captured at 25X to 400X magnification depending on the size of specimens.</li>
	</ol>
	</li>
</ol>
4. In Situ Hybridization
<ol>
	<li>Probe synthesis
	<ol>
		<li>Clone Phalaenopsis aphrodite Actin gene specific coding sequence using primers 5&#39;-GGCAGAGTATGATGAATCTGGTCC-3&#39; and 5&#39;- AGGACAGAAGTTCGGCTGGC -3&#39; (to get 242 bp PCR amplicon) and CyclinB1;1 gene specific coding sequence using primers 5&#39;-TCGTAGCAAGGTTGCTTGTG-3&#39; and 5&#39;- ATGAGCATGGCGCTAATACC-3&#39; (to get 327 bp PCR amplicon) as described 12.</li>
		<li>Ligate the specific coding sequences into vectors (e.g., pGEMT) according to the manufacturer&#39;s protocol.</li>
		<li>Generate digoxigenin (DIG) labeled sense and antisense probes using SP6/T7 DIG RNA labeling kit according to manufacturer&#39;s instructions.</li>
	</ol>
	</li>
	<li>In situ hybridization
	<ol>
		<li>Cut the 2nd and 3rd axillary bud tissue slices (10 &#181;m thickness) generated using the Hybrid-Cut method, and mount slices onto coated slide.</li>
		<li>Deparaffinize tissue sections in xylene (see 3.1.1), rehydrate in decreasing concentrations of ethanol (see 3.2.2), and digest with 2 mg/ml proteinase K at 37 &#176;C for 30 min.</li>
		<li>Perform in situ hybridization according to the protocol previously described 11,13 with some modifications, i.e., with hybridization temperature for Actin as 59 &#176;C and 60 &#176;C for CyclinB1;1. Hybridize slide with 40 ng DIG-labeled RNA probe.</li>
		<li>Use nitroblue tetrazolium/5-bromo-4-chloro-3-indolyl phosphate (NBT/BCIP) solution to detect hybridization signals as described 11.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Fischer, A. H., Jacobson, K. A., Rose, J., Zeller, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cryosectioning+tissues.">Cryosectioning tissues.</a> Cold Spring Harb Protoc. 3, 1-2 (2008).</li><li>Knox, R. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Freeze-sectioning+of+plant+tissues.">Freeze-sectioning of plant tissues.</a> Stain Technol. 45, 265-272 (1970).</li><li>Ruan, J. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+improved+cryosection+method+for+polyethylene+glycol+hydrogels+used+in+tissue+engineering.">An improved cryosection method for polyethylene glycol hydrogels used in tissue engineering.</a> Tissue Eng.: Part C Methods. 19, 794-801 (2013).</li><li>Prychid, C. J., Rudall, P. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Calcium+oxalate+crystals+in+monocotyledons:+A+review+of+their+structure+and+systematics.">Calcium oxalate crystals in monocotyledons: A review of their structure and systematics.</a> Ann Bot. 84, 725-739 (1999).</li><li>Prychid, C. J., Rudall, P. J., Gregory, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Systematics+and+biology+of+silica+bodies+in+monocotyledons.">Systematics and biology of silica bodies in monocotyledons.</a> Bot. Rev. 69 (4), 377-440 (2004).</li><li>Arnott, H. J., Pautard, F. G. E., Steinfink, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+of+calcium+oxalate+monohydrate.">Structure of calcium oxalate monohydrate.</a> Nature. 208, 1197-1198 (1965).</li><li>Mitani, N., Yamaji, N., Ma, J. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+maize+silicon+influx+transporters.">Identification of maize silicon influx transporters.</a> Plant Cell Physiol. 50, 5-12 (2009).</li><li>Hayasaka, T., Fujii, H., Ishiguro, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+silicon+in+preventing+appressorial+penetration+by+the+rice+blast+fungus.">The role of silicon in preventing appressorial penetration by the rice blast fungus.</a> Phytopathology. 98, 1038-1044 (2008).</li><li>Ma, J. F., Yamaji, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silicon+uptake+and+accumulation+in+higher+plants.">Silicon uptake and accumulation in higher plants.</a> Trends Plant Sci. 11, 392-397 (2006).</li><li>Chen, W., Tang, C., YL, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ploidy+doubling+by+in+vitro+culture+of+excised+protocorms+or+protocorm-like+bodies+in+Phalaenopsis+species.">Ploidy doubling by in vitro culture of excised protocorms or protocorm-like bodies in Phalaenopsis species.</a> Plant Cell Tiss Org. 98, 229-239 (2009).</li><li>Javelle, M., Marco, C. F., Timmermans, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+Situ+Hybridization+for+the+Precise+Localization+of+Transcripts+in+Plants.">In Situ Hybridization for the Precise Localization of Transcripts in Plants.</a> J. Vis. Exp. (57), e3328 (2011).</li><li>Park, D. J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=PCR+Protocols.">PCR Protocols.</a> Methods in Molecular Biology. 687, (2011).</li><li>Lin, H. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome-wide+annotation,+expression+profiling,+and+protein+interaction+studies+of+the+core+cell-cycle+genes+in+Phalaenopsis+aphrodite.">Genome-wide annotation, expression profiling, and protein interaction studies of the core cell-cycle genes in Phalaenopsis aphrodite.</a> Plant Mol Biol. 84, 203-226 (2014).</li><li>Lee, Y. -. I., Yeung, E. C., Lee, N., Chung, M. -. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Embryology+of+Phalaenopsis+amabilis+var.+formosa:+embryo+development.">Embryology of Phalaenopsis amabilis var. formosa: embryo development.</a> Bot Stud. 49, 139-146 (2008).</li><li>Endo, M., Ikusima, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diurnal+rhythm+and+characteristics+of+photosynthesis+and+respiration+in+the+leaf+and+root+of+a+Phalaenopsis+plant.">Diurnal rhythm and characteristics of photosynthesis and respiration in the leaf and root of a Phalaenopsis plant.</a> Plant Cell Physiol. 30, 43-47 (1989).</li><li>Guo, W. J., Lee, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+leaf+and+plant+age,+and+day/night+temperature+on+net+CO2+uptake+in+Phalaenopsis+amabilis+var.+formosa.">Effect of leaf and plant age, and day/night temperature on net CO2 uptake in Phalaenopsis amabilis var. formosa.</a> J. Amer. Soc. Hort. Sci. 131, 320-326 (2006).</li><li>Lewin, J., Reimann, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silicon+and+plant+growth.">Silicon and plant growth.</a> Ann. Rev. of Plant Physiol. 20, 289-304 (1969).</li><li>Kaufman, P. B., Simpson, T. L., Valcani, B. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silica+in+shoots+of+higher+plants.">Silica in shoots of higher plants.</a> Silicon and siliceous structures in biological systems. , 409-449 (1981).</li><li>Lundgren, M. R., Osborne, C. P., Christin, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deconstructing+Kranz+anatomy+to+understand+C4+evolution.">Deconstructing Kranz anatomy to understand C4 evolution.</a> J Exp Bot. 65, 3357-3369 (2014).</li><li>Liu, W. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anatomical+and+transcriptional+dynamics+of+maize+embryonic+leaves+during+seed+germination.">Anatomical and transcriptional dynamics of maize embryonic leaves during seed germination.</a> Proc Natl Acad Sci U S A. 110, 3979-3984 (2013).</li><li>Driscoll, S. P., Prins, A., Olmos, E., Kunert, K. J., Foyer, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Specification+of+adaxial+and+abaxial+stomata,+epidermal+structure+and+photosynthesis+to+CO2+enrichment+in+maize+leaves.">Specification of adaxial and abaxial stomata, epidermal structure and photosynthesis to CO2 enrichment in maize leaves.</a> J Exp Bot. 57, 381-390 (2006).</li><li>Karlgren, A., Carlsson, J., Gyllenstrand, N., Lagercrantz, U., Sundstr&#246;m, J. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Non-radioactive+in+situ+Hybridization+Protocol+Applicable+for+Norway+Spruce+and+a+Range+of+Plant+Species.">Non-radioactive in situ Hybridization Protocol Applicable for Norway Spruce and a Range of Plant Species.</a> J. Vis. Exp. (26), (2009).</li><li>Hejatko, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+situ+hybridization+technique+for+mRNA+detection+in+whole+mount+Arabidopsis+samples.">In situ hybridization technique for mRNA detection in whole mount Arabidopsis samples.</a> Nat Protoc. 1, 1939-1946 (2006).</li><li>Javelle, M., Timmermans, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+situ+localization+of+small+RNAs+in+plants+by+using+LNA+probes.">In situ localization of small RNAs in plants by using LNA probes.</a> Nat Protoc. 7, 533-541 (2012).</li><li>Drea, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+situ+analysis+of+gene+expression+in+plants.">In situ analysis of gene expression in plants.</a> Methods Mol Biol. 513, 229-242 (2009).</li><li>Drea, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+streamlined+method+for+systematic,+high+resolution+in+situ+analysis+of+mRNA+distribution+in+plants.">A streamlined method for systematic, high resolution in situ analysis of mRNA distribution in plants.</a> Plant Methods. 1, 8 (2005).</li></ol>

No conflicts of interest declared.

Plant cells have rigid cell walls, tough fibers, crystals, and high water content that cause tissue tearing problems during plant tissue sectioning. Even though paraffin-based sectioning is frequently used for plant tissues, the endogenous crystals often lacerate the plant tissue during sectioning (Figure 1). Because of the inherently high water content within the plant cells, cryostat-based sectioning often causes broken cells and cracked tissue sections.
In the present study, a combined paraffin-embedding and cryosection protocol named Hybrid-Cut was developed and good quality tissue sections were obtained. This protocol resolves the problem associated with high water content by introducing paraffin embedding, and reduces the tearing effect by hardening paraffin wax under low temperature during sectioning (Figure 3). Therefore, this modified protocol is advantageous over either paraffin-based sectioning or cryosectioning for preserving plant tissue integrity.
This manuscript demonstrates that the Hybrid-Cut method preserves tissue integrity in many tissues of Phalaenopsis orchid such as axillary bud, seed, and PLB, etc. that contain high levels of crystals (Figures 3-4). Moreover, this protocol is amenable to cereal crops such as reproductive organs and leaves of rice, maize, and wheat that contain high silica (Figures 5-6). Presumably, this protocol may be applied to woody plants containing high fiber.
In general, fixing tissue thoroughly is very important for Hybrid-Cut. We found that formaldehyde-alcohol-acidic acid (FAA) fixative is better than PFA to preserve the tissue integrity of some recalcitrant tissues such as axially buds, roots, etc. However, PFA works better than FAA in preserving the RNA integrity. Therefore PFA is recommended to fix sample for in situ hybridization (ISH) work. The protocol described here is designed for RNA ISH experiment. Therefore, all reagents were prepared to avoid RNA degradation by eliminating RNase contamination by DEPC treatment. If Hybrid-Cut section is for anatomical studies, regular reverse osmosis (RO) water and its derived buffer or reagents are acceptable.
Reducing specimen size and thickness to less than 3 mm is helpful for infiltration. Moreover, increasing immersion time for dehydration and infiltration are necessary for hard texture tissues. Limitation of this protocol might due to problems caused by inadequate fixation, dehydration, and infiltration of specimen. Therefore, adjustment of processing time for each step is critical to produce good quality paraffin block. Normally, harder tissue needs longer processing time than softer tissue.
In addition, we showed that Hybrid-Cut worked successfully in combination with ISH to provide spatial distribution of the selected transcripts (Figure 7). In summary, this protocol is useful for the study of plant anatomy and provides a tissue-specific RNA map of the selected genes. In addition it may be applied to other molecular studies such as terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay, fluorescence in situ hybridization (FISH), and immunostaining techniques. In conclusion, this improved tissue sectioning protocol is both useful and helpful for researchers in plant communities.

The paraffin-based sectioning method is a widely-used technique for anatomical studies. Preservation of intact tissue anatomy is important for morphological and biological studies. The paraffin-embedded sectioning technique is advantageous because paraffin-embedding retains cell and tissue morphology. In addition, paraffin blocks can be stored conveniently for long periods of time. However, paraffin-embedded sectioning is not suitable for plant tissues containing intracellular crystals. Crystals within the cells often tear paraffin ribbons and damage tissue integrity during sectioning.
Unlike paraffin sectioning, cryosectioning is relatively fast and sections can be obtained without fixation, serial dehydration or embedding medium infiltration 1. Cryosections are compatible with many applications such as immunohistochemistry, in-situ hybridization, and enzyme histochemistry. The other advantage of cryosectioning is that this method does not go through a potential denaturation processes such as high temperature and chemical treatments, so cellular molecules are well preserved within the tissue sections 2. Cryosectioning is generally preferred over paraffin-based sectioning for studies in animal tissues. However, cryosectioning is not the first choice in plants because freezing temperature sometimes causes formation of ice crystals that affect the quality of section integrity. Although osmoregulation such as sucrose solutions, polyethylene glycol (PEG), or glycerol 3 have been reported to reduce crystal ice formation under freezing conditions, the improvement is less than optimal.
To adapt to different environments, different plants often have distinct tissue texture and plant cells have evolved to form rigid cell walls, tough fibers, and crystals 4,5. For example, insoluble calcium oxalate crystals and silica bodies are fairly common in plants 6. Silicate bodies/crystals have been reported to help maintain plant architecture, erectness, and prevent disease or pest in cereal plants 7-9.
The potted orchids and cut-flower orchid market is flourishing and it is a growing industry. Phalaenopsis aphrodite (moth orchid) is one of the most important export ornamental plants in Taiwan. Significant efforts have been made to understand the morphological and physiological changes of the flowering processes in Phalaenopsis orchids. Floral spikes of Phalaenopsis orchids are initiated from axillary buds at the leaf base. After a period of cool ambient temperature (approximately one and half months), axillary buds enlarge, break dormancy, and protrude from the leaf base to develop into young floral spikes. To understand the physiological, cellular, and molecular processes of spike initiation, it is essential to develop a robust anatomical technique to visualize tissues or markers in a timely manner. However, the presence of ubiquitous crystals in orchid tissues, particularly in axillary buds, makes anatomical work difficult.
Here we sought to improve section integrity of recalcitrant plant tissues that have been hitherto regarded as technically challenging. Here we show an improved protocol named Hybrid-Cut. It is a paraffin-based sectioning method that is performed using a cryostat. Paraffin embedding resolves high water content in plant tissue. Sectioning under low temperature hardens the paraffin block, reduces crystal tearing problem, and improves tissue integrity significantly. This protocol significantly improves tissue integrity for recalcitrant plant samples.

<table border="0" cellpadding="0" cellspacing="0" width="734">
	<tbody>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Embedding Center model EC780-1</td>
			<td style="width:127px;">CSA</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Microtome model RM2255</td>
			<td style="width:127px;">Leica</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Cryostat model CM 1950</td>
			<td style="width:127px;">Leica</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Axio Scope A1 microscope&#160;</td>
			<td style="width:127px;">Zeiss</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Murashige &#38; Skoog medium including vitamins</td>
			<td style="width:127px;">Duchefa Biochemia</td>
			<td style="width:119px;">M0222.0050</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">RNase free surface decontaminant</td>
			<td style="width:127px;">Apex</td>
			<td style="width:119px;">10-228</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Diethyl pyrocarbonate (DEPC)</td>
			<td style="width:127px;">Bio Basic Inc.&#160;</td>
			<td style="width:119px;">D801154</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Sodium chloride (NaCl)</td>
			<td style="width:127px;">MDBio, Inc.</td>
			<td style="width:119px;">101-7647-14-5</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="23">
			<td height="23" style="height:23px;width:321px;">Potassium chloride, crystal (KCl)</td>
			<td style="width:127px;">J.T. Baker</td>
			<td style="width:119px;">7447-40-7</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:321px;">Sodium phosphate dibasic (NA2HPO4)</td>
			<td style="width:127px;">Sigma-Aldrich</td>
			<td style="width:119px;">7558-79-4</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:321px;">Potassium phosphate monobasic (KH2PO4)</td>
			<td style="width:127px;">Sigma-Aldrich</td>
			<td style="width:119px;">7778-77-0</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Paraformaldehyde (PFA)</td>
			<td style="width:127px;">Sigma-Aldrich</td>
			<td style="width:119px;">16005</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Sodium hydroxide (NaOH)</td>
			<td style="width:127px;">Showa</td>
			<td style="width:119px;">19430160</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:321px;">Sulfuric acid (H2SO4)</td>
			<td style="width:127px;">Sigma-Aldrich</td>
			<td style="width:119px;">7664-93-9</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Glutaraldehyde solution</td>
			<td style="width:127px;">Sigma-Aldrich</td>
			<td style="width:119px;">111-30-8</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Polyoxyethylene 20 sorbitan monolaurate (Tween 20)</td>
			<td style="width:127px;">J.T. Baker</td>
			<td style="width:119px;">9005-64-5</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Octyl Phenol Ethoxylate (Triton X100)</td>
			<td style="width:127px;">J.T. Baker</td>
			<td style="width:119px;">9002-93-1</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Glass scintillation vials</td>
			<td style="width:127px;">Newastar</td>
			<td style="width:119px;">DG60805-00020</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:321px;">Desiccator vacuum</td>
			<td style="width:127px;">Violet Bioscience Inc.</td>
			<td style="width:119px;">TS-402030</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Rotary vane pump RZ2.5</td>
			<td style="width:127px;">Vacuubrand</td>
			<td style="width:119px;">36149406</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Ethanol</td>
			<td style="width:127px;">J.T. Baker</td>
			<td style="width:119px;">64-17-5</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Sub-X&#160;</td>
			<td style="width:127px;">Leica Surgipath</td>
			<td style="width:119px;">3803670</td>
			<td style="width:167px;">Xylene substitute</td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Paraplast Plus&#160;</td>
			<td style="width:127px;">Leica Surgipath</td>
			<td style="width:119px;">39602004</td>
			<td style="width:167px;">Tissue embedding paraffin</td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">SUPERFROST micro slide glass</td>
			<td style="width:127px;">Matsunami</td>
			<td style="width:119px;">S7441</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="51">
			<td height="51" style="height:51px;width:321px;">FSC 22 Clear&#160;</td>
			<td style="width:127px;">Leica Surgipath</td>
			<td style="width:119px;">3801480</td>
			<td style="width:167px;">Optimal Cutting Temperature compound (OCT)&#160;</td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Xylenes, Purified</td>
			<td style="width:127px;">Leica Surgipath</td>
			<td style="width:119px;">3803665</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Hematoxylin</td>
			<td style="width:127px;">Merck</td>
			<td style="width:119px;">HX305311</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Hydrochloric acid (HCl)</td>
			<td style="width:127px;">Sigma-Aldrich</td>
			<td style="width:119px;">7647-01-0</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">Micromount</td>
			<td style="width:127px;">Leica Surgipath</td>
			<td style="width:119px;">3801731</td>
			<td style="width:167px;">Mounting medium</td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">pGEM T-easy vector</td>
			<td style="width:127px;">Promega</td>
			<td style="width:119px;">A1360</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Proteinase K</td>
			<td style="width:127px;">Roche</td>
			<td style="width:119px;">3115879001</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">SP6/T7 DIG RNA Labeling Kit</td>
			<td style="width:127px;">Roche</td>
			<td style="width:119px;">11175025910</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:321px;">NBT/BCIP stock solution</td>
			<td style="width:127px;">Roche</td>
			<td style="width:119px;">11681451001</td>
			<td style="width:167px;"></td>
		</tr>
	</tbody>
</table>

hybrid-cut: an improved sectioning method for recalcitrant plant tissue samples

Maintaining plant section integrity is essential for studying detailed anatomical structures at the cellular, tissue, or even organ level. However, some plant cells have rigid cell walls, tough fibers and crystals (calcium oxalate, silica, etc.), and high water content that often disrupt tissue integrity during plant tissue sectioning.
This study establishes a simple Hybrid-Cut tissue sectioning method. This protocol modifies a paraffin-based sectioning technique and improves the integrity of tissue sections from different plants. Plant tissues were embedded in paraffin before sectioning in a cryostat at -16 &#176;C. Sectioning under low temperature hardened the paraffin blocks, reduced tearing and scratching, and improved tissue integrity significantly. This protocol was successfully applied to calcium oxalate-rich Phalaenopsis orchid tissues as well as recalcitrant tissues such as reproductive organs and leaves of rice, maize, and wheat. In addition, the high quality of tissue sections from Hybrid-Cut could be used in combination with in situ hybridization (ISH) to provide spatial expression patterns of genes of interest. In conclusion, this protocol is particularly useful for recalcitrant plant tissue containing high crystal or silica content. Good quality tissue sections enable morphological and other biological studies.

Hybrid-Cut Improves the Integrity of Tissue Sections
Understanding the anatomy of the reproductive floral structure is important for investigating the underlying mechanism of flower initiation in orchids. However, the accumulation of intracellular calcium oxalate crystals in Phalaenopsis orchids makes such studies a challenging task. To circumvent the problems associated with tearing caused by crystals during the sectioning process (Figure 1), we developed a system we named Hybrid-Cut. This protocol combines traditional paraffin embedding and cryosection techniques. We first tested Hybrid-Cut in axillary buds of Phalaenopsis orchid because they are notorious for tissue rigidity and high crystal content. Axillary bud tissue was fixed in 4% PFA (see Protocol, step 1.3). After serial ethanol dehydration and paraffin wax infiltration, the axillary bud was embedded in a paraffin block. The block was trimmed to a suitable size before sectioning (Figure 2A). A small amount of OCT was then applied to the center of the cryostat stage (Figure 2B). The paraffin block was then adhered to the stage via OCT. The stage was incubated in a cryostat for 10 min to allow complete solidification of OCT before sectioning (Figure 2C) and then cryosection was performed in a -16 &#176;C chamber (Figure 2D).
As a comparison, a paraffin block containing an axillary bud of Phalaenopsis orchid was subjected to regular microtome sectioning. As shown in Figure 1A, severe tearing of the paraffin ribbons was observed after microtome sectioning. The tissue integrity and cellular structure was also compromised (Figure 1B). Hybrid-Cut, on the other hand, produced intact tissue sections (Figure 3A) with preserved structural integrity (Figure 3B).
Application of Hybrid-Cut to Various Tissues of P. aphrodite
To further test the amenability of Hybrid-Cut, we tested different tissues of Phalaenopsis orchids. It is often difficult to obtain sections of seeds with good tissue integrity because of the hardened seed coats. Using this protocol, detailed structures of seeds were preserved after sectioning (Figure 4A). As shown in Figure 4A, protein bodies, the common storage products 14, could be clearly identified. Hybrid-Cut also worked successfully and showed the detailed structures of the shoot apical meristem of the one-month old protocorm (the germinated structure from a seed) (Figure 4B) and protocorm-like-bodies (PLBs, Figure 4C). The intracellular crystals were observed in sections of PLB. Phalaenopsis orchids have thick and succulent leaves and they perform Crassulacean acid metabolism (CAM)-type photosynthesis 15. The transverse section of leaf blade showed large mesophyll cells and vascular bundles containing xylem and phloem (Figure 4D). Few stomatal openings were observed on the abaxial leaf surface during the daytime (Figure 4D). In fact, CAM plants evolved to maximize carbon gain but simultaneously minimize water loss by opening their stomates in the night under arid conditions 15,16. The root apical meristem of P. aphrodite is shown in Figure 4E. The root tip cells appeared to contain a significant number of crystals, which were very well preserved after sectioning (Figure 4E). Longitudinal sections of young floral spikes provided information about the architecture of young floral primordials (Figure 4F). Moreover, sepals, petals, labellum, and pollinia could be clearly identified from the longitudinal section of young flower buds that have completed differentiation in this 5 mm flower bud (Figure 4G). Notice that crystals were accumulated in the sepals of young floral buds. In short, this protocol works consistently to maintain tissue integrity and produces intact morphology enabling anatomical and possible cellular studies.
Hybrid-Cut Preserves Tissue Integrity in Cereal Crops
We also tested Hybrid-Cut on cereal crops such as rice, wheat and maize that contain high silica content 17,18. As shown in Figure 5, the tissue integrity of transverse sections of rice, wheat, and maize leaves were significantly improved by the Hybrid-Cut method. Xylem, phloem, mesophyll cells, stomates, and bulliform cells that control rolling of the leaf blade to avoid water loss were clearly identified from sections of rice leaves. The Kranz anatomy, mesophyll cells, and vascular bundles of the maize leaf 19,20 were clearly identified. It was intriguing to find a high density of stomates on both the adaxial and abaxial sides of maize leaves (Figure 5). The ratio of adaxial and abaxial stomata of 0.7 in maize has been reported previously 21. In addition, this protocol also worked successfully to provide the detailed cell morphology of spikelets from rice, wheat, and maize (Figure 6). Spikelets are known to contain abundant silica 9. Normally, that causes difficulty in conducting tissue sectioning.
In Situ Hybridization
Genomic and transcriptomic approaches are commonly used to annotate the functions of genes. Providing spatial distribution of transcripts of the genes of interest in developmental or environmental contexts is important to add new insight into the possible functions of the genes. In-situ hybridization (ISH) has been developed to localize gene expression patterns at the tissue level 11,22-25. In addition, ISH can provide cellular, and in some cases sub-cellular, resolution of mRNA distribution in multicellular organisms 26. During ISH, RNA and tissue integrity is essential to obtain reliable spatial information about the selected transcript. We tested ISH using the Hybrid-Cut protocol. Actin gene (PATC157348) was cloned using primers 5&#39;-GGCAGAGTATGATGAATCTGGTCC-3&#39; and 5&#39;- AGGACAGAAGTTCGGCTGGC -3&#39; to get 242 bp PCR amplicon. Cyclin B1:1 (PATC146999) gene specific coding sequence using primers 5&#39;-TCGTAGCAAGGTTGCTTGTG-3&#39; and 5&#39;- ATGAGCATGGCGCTAATACC-3&#39; to get 327 bp PCR amplicon. After ISH, Actin and Cyclin B1:1 gene expression was monitored in young and mature axillary buds (Figure 7). Both genes were expressed in meristematic cells of 2nd and 3rd axillary buds, with stronger signals detected in 3rd axillary buds. These results demonstrated that Hybrid-Cut retain good anatomy and provide spatial gene expression pattern.
<img alt="Figure 1" src="/files/ftp_upload/54754/54754fig1.jpg" /> 
Figure 1: Traditional Paraffin Section Causes Severe Tearing of Tissue. A paraffin block containing an axillary bud of Phalaenopsis orchid was subjected to regular microtome sectioning. Severe tearing of the paraffin ribbons was observed after traditional microtome sectioning (A). The tissue integrity and cellular structure was also compromised (B). The arrows show the severe tearing of the tissue slice. Arrowhead shows the crystal bodies. Scale bar 100 &#181;m. <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 2" src="/files/ftp_upload/54754/54754fig2.jpg" /> 
Figure 2: Hybrid-Cut Sectioning Method. An axillary bud tissue was fixed in PFA and tissues were dehydrated, infiltrated with paraffin wax, and embedded in a paraffin block. The paraffin block was trimmed to an appropriate size (A). Optimal Cutting Temperature compound (OCT) was applied to the center of the cryostat stage (B). The paraffin block was attached to the OCT on the cryostat stage. Under low temperature, the paraffin block was adhered to the cryostat stage via OCT (C). Tissue slices were sectioned in the cryostat chamber at -16 &#176;C (D). Scale bars represent 0.5 cm (A), and 1 cm (B-D). <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" src="/files/ftp_upload/54754/54754fig3.jpg" /> 
Figure 3: Hybrid-Cut Improves Section Integrity. A paraffin block containing an axillary bud of Phalaenopsis orchid was subjected to Hybrid-Cut sectioning (A) and the Hybrid-Cut method produced sections with excellent tissue integrity (B). The arrowhead shows the endogenous crystal bodies embedded in the axillary bud tissue. Scale bar 100 &#181;m. <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 4" src="/files/ftp_upload/54754/54754fig4.jpg" /> 
Figure 4: Application of Hybrid-Cut to Various Tissue Sections of Phalaenopsis orchid. Different orchid tissues were sectioned using the Hybrid-Cut method, such as longitudinal section of orchid seed during the mature stage (A), longitudinal section of protocorm (B), longitudinal section of protocorm-like bodies (PLB) (C), transverse section of leaf blade (D), longitudinal section of root (E), longitudinal section of young flower spike (F), and longitudinal section of young flower buds (G). Tissue sections were stained by hematoxylin. SC, seed coat; PB, protein body; M, meristem; MP, mother PLB; DP, daughter PLB; Ad, adaxial leaf surface; Ab, abaxial leaf surface; St, stomata; MC, mesophyll cell; VB, vascular bundle; RC, root cap; fb, flower bud; Se, sepal; Pe, petal; La, labellum; Po, pollinia; Ro, rostellum; Ca, callus. Arrowheads show crystals. Scale bars represent 20 &#181;m (A-E) and 200 &#181;m (F-G). <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig4large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 5" src="/files/ftp_upload/54754/54754fig5.jpg" /> 
Figure 5: Hybrid-Cut Preserves Leaf Tissue Integrity in Several Cereal Crops. Comparison of leaf tissue using the traditional paraffin method (left-hand panel) and the Hybrid-Cut technique developed in this study (right-hand panel). Images show leaf transverse sections of rice, wheat, and maize. MC, mesophyll cell; Ph, phloem; St, stomata; BC, bulliform cell. Arrows show the tearing of tissue slice. Arrowheads show silica bodies. The blue dashed circles indicate Kranz anatomy in C4 maize. Scale bars 20 &#181;m. <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig5large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 6" src="/files/ftp_upload/54754/54754fig6.jpg" /> 
Figure 6: Hybrid-Cut Preserves Spikelet Tissue Integrity in Several Cereal Crops. Comparison of tissue integrity of spikelet sections between traditional paraffin and Hybrid-Cut methods. Arrows show the tearing of tissue slice. Arrowheads indicate silica bodies. Scale bars 20 &#181;m (rice), and 200 &#181;m (wheat and maize). <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig6large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 7" src="/files/ftp_upload/54754/54754fig7.jpg" /> 
Figure 7: In Situ Hybridization of Actin and CyclinB1;1 Expression Patterns in the Axillary Bud of Phalaenopsis orchid. Tissue slices of the 2nd axillary buds and 3rd axillary bud were prepared using the Hybrid-Cut method. A total of 40 ng of Actin and CyclinB1;1 dig-labeled probe were used for hybridization. The sense probe was used as a negative control. Arrows indicate the reproductive meristem of axillary bud. Scale bars 100 &#181;m. <a href="http://cloudflare.jove.com/files/ftp_upload/54754/54754fig7large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

Watch this Scientific Journal Video about Hybrid-Cut: An Improved Sectioning Method for Recalcitrant Plant Tissue Samples at JoVE.com

Hybrid-Cut: An Improved Sectioning Method for Recalcitrant Plant Tissue Samples

This protocol describes a simple Hybrid-Cut tissue sectioning method that is useful for recalcitrant plant tissues. Good quality tissue sections enable anatomical studies and other biological studies including in situ hybridization (ISH).

Maintaining plant section integrity is essential for studying detailed anatomical structures at the cellular, tissue, or even organ level. However, some ...

Research

JoVE Journal

Biology

Testing Nicotine Tolerance in Aphids Using an Artificial Diet Experiment

Plants may upregulate the production of many different seconday metabolites in response to insect feeding. One of these metabolites, nicotine, is well ...

Genotyping of Plant and Animal Samples without Prior DNA Purification

The Direct PCR approach facilitates PCR amplification directly from small amounts of unpurified samples, and is demonstrated here for several plant and ...

An Improved Method for Accurate and Rapid Measurement of Flight Performance in Drosophila

An Improved Method for Accurate and Rapid Measurement of Flight Performance in Drosophila

Drosophila has proven to be a useful model system for analysis of behavior, including flight. The initial flight tester involved dropping flies into an ...

An Efficient Method for Quantitative, Single-cell Analysis of Chromatin Modification and Nuclear Architecture in Whole-mount Ovules in Arabidopsis

An Efficient Method for Quantitative, Single-cell Analysis of Chromatin Modification and Nuclear Architecture in Whole-mount Ovules in Arabidopsis

In flowering plants, the somatic-to-reproductive cell fate transition is marked by the specification of spore mother cells (SMCs) in floral organs of the ...

Method for Measuring the Activity of Deubiquitinating Enzymes in Cell Lines and Tissue Samples

The ubiquitin-proteasome system has recently been implicated in various pathologies including neurodegenerative diseases and cancer. In light of this, ...

A Fast Air-dry Dropping Chromosome Preparation Method Suitable for FISH in Plants

Preparation of chromosome spreads is a prerequisite for the successful performance of fluorescence in situ hybridization (FISH). Preparation of high ...

Improved Swiss-rolling Technique for Intestinal Tissue Preparation for Immunohistochemical and Immunofluorescent Analyses

Understanding the role of factors that regulate intestinal epithelial homeostasis and response to injury and regeneration is important. The current ...

An Easy Method for Plant Polysome Profiling

Translation of mRNA to protein is a fundamental and highly regulated biological process. Polysome profiling is considered as a gold standard for the ...

Scanning Electron Microscopy (SEM) Protocols for Problematic Plant, Oomycete, and Fungal Samples

Scanning Electron Microscopy SEM Protocols for Problematic Plant, Oomycete, and Fungal Samples

Common problems in the processing of biological samples for observations with the scanning electron microscope (SEM) include cell collapse, treatment of ...

Standardized Method for High-throughput Sterilization of Arabidopsis Seeds

Arabidopsis thaliana (Arabidopsis) seedlings often need to be grown on sterile media. This requires prior seed sterilization to prevent the growth of ...